TATSPL_Profile.pdf

AN ISO: 9001-2008 COMPANY (A name….. U can always Trust)

COMPETENT PERSON - FACTORY ACTS, SMPV RULE (EXPLOSIVE), PETROLEUM RULE, INSPECTION / CONSULTING ENGINEER, GOVT. REG. VALUER, ENERGY AUDITOR, SAFETY AUDIT, ON SITE EMERGENCY PLAN, HAZOP STUDY, LIFT INSPECTION AGENCY,

CALIBRATION OF STORAGE TANKS, CALIBRATION OF INSTRUMENTS

Regd. Office : 109-113, Sid Cup Tower, Race Course, Vadodara-390 007. GUJARAT-INDIA Phone: 0265-2343511, 2331124, Fax: 2350612, Mobile: 98795 44010

E-mail: [email protected], www.trivediassociates.co.in

BRANCH OFFICE REF: T&ATSPL/GEN/INTRO/ Date:

M/s. ________________________

________________________

_____________________

Kind Attn :

Subject: Brief Introduction to the Company & its Technical and Engineering Services

Dear Sir,

We take this opportunity to introduce ourselves as the Private Limited Company accredited with ISO: 9001-2008 Certification providing the Technical Services in the diversified areas. Our company is a unique company having highly qualified team of Engineers having experience of 35 to 40 years in responsible positions in reputed organizations from private, public and corporate sectors in the fields of Mechanical, Electrical, Instrument, Civil, Chemicals and Safety. We have competent persons for certification for all types of Government / Statutory requirements like SMPV Rule, Petroleum Rule- Nagpur, Factory Acts, Energy Audit, Lift Inspection, Valuer, Calibration of different types of Instrument, Safety Audit, On Site Emergency Plan, Risk Assessment, HAZOP Study etc with full range of instruments, tools-tackles, and highly qualified and experienced Technicians & Staff.

We are self-employed since March 1988 and starting from scratch, gradually diversifying into number of areas of professional activities. We have now started offering “Management Consultancy in Materials and Supply Chain”, in our quest to serve industries in other areas also. Our Training division also provides the following activities for the benefit of working engineers/Executives/Managers so that they can increase the productivity and efficiency of their organizations. a. Organizing various workshops at different venues time to time on Statutory Compliance &

Electrical Safety Audit etc. b. Arranging In-house Training programmes for valued clients in private / public / corporate sector. c. Publishing reference books for engineer’s fraternity.

-: Group Company :- PRATIBHA ENGG. SERVICES

Engineers and Licensed Electrical Contractor

PLOT NO. 5 & 6, NR. TRUPTI HOTEL, B/H MOBILE TOWER, AT & POST: MEGHPUR, TAL: LALPUR, DIST:

JAMNAGAR


COMPETENT PERSON RECOGNIZED UNDER EXPLOSIVE DEPARTMENT - CCOE, NAGPUR SMPV(U) RULES, 1981

Yearly Testing, Calibration and Certification of Safety Valves and Excess Flow Valve issued under rule 18 of SMPV(U) Rules, 1981.

Periodical NDT Testing and Hydro Testing, Certification of Pressure Vessels and Bullets issued under rule 19 of SMPV(U) Rules, 1981.

Certification of Safety for Storage of Installation of Liquefied / Compressed Gases Vessels other than spheres issued under rule 33 of SMPV(U) Rules, 1981.

COMPETENT PERSON UNDER THE PETROLEUM RULE 1976 & THE PETROLEUM ACTS 1934, EXPLOSIVE DEPTT., NAGPUR

Inspection of Petroleum Storage Tank and issuing of Testing Certificate under Rule 126. Inspection of Hazardous Storage Installation & issuing of Safety Certificate under Rule 130.

COMPETENT PERSON UNDER THE FACTORIES ACT, 1948 / THE GUJARAT FACTORIES RULES

Inspection of Lifts / Hoists & Certification in FORM NO. 9 under Section 28/Rule 58 [Every 6 months].

Inspection of EOT / HOT Cranes, Mobile Cranes, Chain Pulley Blocks, Lifting Tackles, Wire Rope Slings, D’ Shackles, etc. & Certification in FORM NO. 10 under Section 29/Rule 60 [Every 12 months].

Inspection of Pressure Vessels and Plants, Safety Valves, etc. & Certification in FORM NO. 11 under Section 31/Rule 61, External examination, [Every 6 months], Internal examination, if possible [Every 12 months], Hydraulic Testing [Every 2 years, if no internal examination] & Hydraulic Testing [Every 4 years, if Internal examination possible].

Safety against rotating / moving machinery, Dangerous machines like Power Presses /Centrifugal Machines & Certification under Section 21/Rule 54 [Every 12 months].

Inspection and Certification for entering in Chamber, Tank Pit, Confined Space, etc. having presence of gas, fume, dust, etc., to involve risk under Section 36/Rule 64 [To be carried out as and when such work to be taken up].

Provisions for hazardous processes, Thermic Fluid Heaters, Ovens / Dryers under Section 41 & for Ship breaking / building activities under Section 112 & Certification [Every 12 months].

Inspection of Dust / Fume extraction systems, Ventilation Systems, Safety for exposure of workman, etc. & Certification in FORM NO. 26A under Section 87 / Rule 102 [Every 12 months].

Inspection, Testing & Certification of Plant Structures and Buildings and issuing of Stability Certificate in FORM NO. 3-A under Section 6 / Rule 3 [Every 5 years].

Approved Training Institute under Section 111-A of Factory Act, 1948 by DISH, Gujarat.

COMPETENT PERSON UNDER THE PROVISIONS OF SECTION. 2(c)(a) OF FACTORIES ACT, 1948 IN THE STATE OF MAHARASHTRA

Inspection, Testing & Certification of Lifts & Hoists under Section 28. Inspection, Testing & Certification of Lifting Machines, Chains, Ropes, Lifting Tackles

under Section 29.


ENERGY AUDITOR

Government Authorised Energy Auditor for Industries & Commercial Establishment as per Government of Gujarat notification for Industries Contract Demand 200 KVA and above, for Commercial Complex Contract Demand 75 KW and above.

LIFT INSPECTION AGENCY UNDER THE GUJARAT LIFTS AND ESCALATORS RULES, 2001

Government Authorised Lift Inspection Agency as per the Gujarat Lifts and Escalators Rule, 2001, from Energy and Petrochemical Deptt. Govt. of Gujarat for Industries / Commercial firms under Notification.

CALIBRATION AND CERTIFICATION OF INSTRUMENTS TO COMPLY WITH ISO: 9001 REQUIREMENTS (NABL ACCREDITATION APPROVAL UNDER PROCESS)

Field Calibration & Certification of Electrical Meters, Pressure / Vacuum Gauges,

Temperature Gauges / Sensors / Controllers, etc. as per ISO 9001 procedure.

GOVERNMENT APPROVED VALUATION

We are the Government Approved Valuer to carry out exercise of Valuation of Plant and Machinery, Land & Building as per defined guidelines. We are recognized under the Wealth Tax Act, 1957.

CHARTERED ENGINEER SERVICES

We also provide our services as Chartered Engineer by issuing Certificates required for meeting Import and Export formalities, Claim of Duty drawback for imported equipment after Installation, Equipment Performance, Chemical Process / Modification etc.

OTHER SPECIALISED AREAS OF SERVICES

Preparation of Safety Audit, Onsite Emergency Plan, Fire Assessment, Health Policy, HAZOP Study, Risk Assessment etc.

In-house Training in the areas of Safety Management, Production Management, Quality Management, Inventory Management, Value Engineering etc.

Electrical Consultant & Licenced Electrical Contractor, we are rendering our services from concept to commissioning up to 66 KV switchyard in India as well as in overseas also.

Servicing & Repairing of Lifting / Pulling Tackles, EOT Cranes, Hoists, etc. Ultrasonic Thickness Testing & Certification of Equipment / Vessel. Electrical Relay Testing, HT / LT Cable Testing, Transformer Oil Testing, Earthing

Testing. Measurement of Clear Liquid Flow using portable Ultrasonic Flow Meter, Noise Level

using Sound Level inst., Illumination level using Lux Level Meter, Harmonics using Power Analyzer.

Third party inspection & testing of Electrical/Mechanical equipments and instruments.


In-house Training in the areas of Safety Management, Production Management, Quality Management, Inventory Management, Value Engineering etc.

Carry out Designing of Pressure Vessels and Road Tanker as per IS: 2825/ASME Section –VIII Division - I

Carry out designing of Storage Tanks as per IS: 803/API 650. Electrical Consultant & Licensed Electrical Contractor. We are rendering our

services from concept to commissioning up to 66 kV switchyard in India as well as overseas also.

Consultancy in Materials and supply chain management. We offer services for design/up gradation of stores, inventory management, spare parts management, standardization/variety reduction-import substitution, procurement, and scrap and surplus disposal. We shall also attend to any specific problems related to supply chain, logistics, sourcing, imports etc.

Carry out NDT Inspection method level II NDT viz. UT, RT, MPI, Dye penetration as per ASNT NDT LEVEL – II, SNT TC1A

Providing Training & Certification course from LEVEL III certification agency. We wish to emphasize that ISO 9001: 2008 accreditation has been obtained with an ultimate objective of our desire to assure our customers of better and quality services in number of diversified areas. We are pleased to mention that, today, ours is an unique Company among very few ISO accredited companies providing so many technical and value added engineering services. With this last word, we solicit your fullest support by way of giving us an opportunity to render our prompt, reliable, efficient and quality services with competitive rates.

Kindly contact us for detailed information regarding any of our technical/engineering and management services.

Thanking You,

Yours Truly, For Trivedi & Associates Tecknical Services (P.) Ltd

(P. N. TRIVEDI) Managing Director


QUALITY POLICY We, through our Continuous

Up-gradation of Endless Knowledge, Skill, and Team

Work, shall achieve and sustain Delightful Customer

Satisfaction by providing our Reliable, Prompt and Value added Engineering Services

with an Ultimate Goal to encourage Safety, Cost Control and Enhanced

Productivity. P. N. Trivedi Date: 1st March 2003 Managing Director


VISION STATEMENT

We are determined to achieve

total Customer satisfaction by

continual up gradation of skills of

our employees and imparting

quality consciousness in entire

gamut of activities to create

synergies with our Customers so as

to strive to excel in achieving

common goal.


ORGANISATION DETAILS

NAME : TRIVEDI & ASSOCIATES TECKNICAL SERVICES (P.) LTD.

FIRM REGISTERED UNDER : PRIVATE LIMITED COMPANY

YEAR OF ESTABLISHMENT : As Proprietary concern in 1988, Converted to Private Limited Company in 1999

REGD. OFFICE : 109-113, SID CUP TOWER NR. MARBLE ARCH RACE COURSE VADODARA – 390 007 CONTACT DETAILS : Phone: (0265) 2343511, 2331124 Fax: (0265) 2350612 Mobile: 9879544010

E-mail: [email protected] Website: www.trivediassociates.co.in

TUV CERTIFICATE REGD. NO. : QM 02 00002 (ISO 9001 : 2008) PERMANENT ACCOUNT NO. : AABCT 0624 M SERVICE TAX REGD. NO. : AABCT0624MST001 – Consulting Engineer, Test,

Inspection Certification, Maintenance or Repair Services

PROVIDENT FUND REGD. NO. : GJ/BD/65276 GUJARAT VAT/TINNO. : 24190102274, Dtd. 29/12/2003

EMPLOYEE STATE INSURANCE : 38-23427-67, Dtd. 02.03.2005 CORPORATION NO. ENERGY AUDITOR AUTH. NO. : GUJ/007 LIFT INSPECTOR AUTH. NO. : G/IL/00003 ELECTRICAL CONTRACTOR : G/B/C 2407 LICENCE NO.

REGD. NO.UNDER SMPV(U) : PV (R )429, Dtd. 14.09.2004 RULES

REGD. NO. UNDER PETROLEUM : P-3(9)241, Dtd. 05.10.1988 of Mr. P.N. Trivedi RULES, 1976 : P-3(9)241, Dtd. 27.01.2010 of Mr. D.M. Vaidya

Three Years Turnover : Year Turnover (Rs.’In Lacs) 2011-2012 216.27 2012-2013 244.21 2013-2014 310.00 (Projected)


OUR RICHLY EXPERTISE MANPOWER STRENGTH

Manpower Category

Strength

Experience

Level

Directors 2 2

More than 30 Years More than 15 Years

Senior Management Personnel 5 More than 25 years in relevant field

Middle Management Level 3 15-20 years

Supervisory Level 6 Less than 10 years

Technicians & Helpers 20 7-10 years

Office Administration 15 5 years and above

Associates 10 More than 35 years


AREAS OF OUR SERVICES / ACTIVITIES

DETAILS OF CERTIFICATES OF COMPETENCY/AUTHORISATIONS WITH COMPANY

Competent Person

No. of Certificate of Competency

Section & Rule

Activity covered under Section and Rules

Inspection Period

CHARTERED ENGINEER/PROFESSIONAL ENGINEER CERTIFICATION P. N. Trivedi C. Eng. No. FIE-F-017115-4

Mech. &

Elect Chem.

Professional engineering services for issuing certificates for import equipment

installation duty drawback, DG installation, Competent Recognition and other such

Engineering Services

As

Required

D. M. Vaidya C. Eng. No. M 52698/8 H. H. Trivedi C. Eng. No. M 139426-0

J.J. Shah C. Eng. No. AM 095183-0 R.M.Kanzariya C. Eng. No. AM 098231-0

M.M. Patki C. Eng. No. M 127740-5 A.C. Dave C. Eng. No.M 141805-4

Vinod L Gohel C. Eng. No. AM 094930-5

CERTIFICATES OF COMPETENCY UNDER THE PETROLEUM RULES, 1976, EXPLOSIVE DEPTT. P. N. Trivedi No.P-3 (9)241/5.10.1988 Rule

126 Rule 130

Petroleum Storage tank Testing Certificate Hazardous Installation Safety Certificate

For new const. D.M. Vaidya No.P-3 (9)241-2009/ 27.1.2010

COMPETENCY UNDER THE STATIC & MOBILE PRESSURE VESSELS (UNFIRED) RULES, 1981 P. N. Trivedi PV (R) 429

Dated: 06/09/2004

Rule 18

Testing & certification of Safety Relief Valves fitted to pressure vessels.

Every 12

Months A.I. Joshipura

D.D. Mankad Rule 19

Inspection, testing & Certification of Pressure vessels under SMPV Rules (Other than Horton Spheres)

For new const. & Every 5 years

Rule 33

Issue of Safety Certificate for installation of Pressure vessels (gas filled)

For new const.

EXEMPTION / SELF CERTIFICATION UNDER THE INDIAN BOILER ACT,1923 P. N. Trivedi

Second class Boiler proficiency Engineer with certificate No: 206 dated: 29-7-1987

Govt. R.No.

FAC/2003/

3043/M(3)

Dt.5/12/03

Open Boiler Inspection & Hydraulic testing (Self certification cum consolidated Annual

return scheme)

Every Year

AUTHORISATION FOR ENERGY AUDIT UNDER GOVT. NOTI. GHU/99/31/GUE/1196/9018/K1

P. N. Trivedi H. H. Trivedi

No. GUJ/007

Govt. Notifi.

Energy Audit in industries with Contract Demand of above 200 kVA, Commercial

establishments with load of above 75 kW

Every 3 years

AUTHORISATION FOR INSPECTION & TESTING OF LIFTS UNDER THE GUJARAT LIFTS & ESCALATORS RULES, 2002

P. N. Trivedi G/SZ/IL/00003

Rule 23

Testing and Inspection of Lifts in Industries, Commercial/Residential complexes, and report as per Annexure XX of Rule 23

Every 6

months

H. P. Trivedi H. H. Trivedi



Competent Person


Section & Rule


Inspection Period

AUTHORISATION FOR VALUATION OF PLANT & MACHINERY UNDER THE WEALTH TAX ACT, 1957, SEC 34AB

P. N. Trivedi 36 of Cat-VII Act

34 AB

Services for valuation of Plant and Machinery and furnishing of report as required Approved Valuer

As

required

D.M. Vaidya 72 of Cat-VII H. H. Trivedi A 13525 K.M. Thakkar I/124/11-12

AGENCY FOR TESTING & CALIBRATION OF INSTRUMENTS AND CERTIFICATION WITH TRACEABILITY TO COMPLY WITH ISO REQUIREMENT

P. N. Trivedi C. Eng. No. FIE-F-017115-4 For ISO:9001 comply

Testing and Calibration of Ammeters, Voltmeters, Relays, Pressure/Vacuum gauges, Temp. gauges, Sensors/ Controllers, Safety valves, with traceability to standard calibration requirements

Every 12

months

H. H. Trivedi C. Eng. No. AM 091228-2 A.C. Dave C. Eng. No.M 141805-4

AGENCY FOR SAFETY AUDIT, ELECTRICAL SAFETY AUDIT ONSITE EMERGENCY PLAN, RISK ASSESSMENT REPORT

P. N. Trivedi

--------

Rule 68-J

Sche. 8 Preparation of Safety Audit and Elect. Safety Audit Report, Onsite Emergency Plan, Risk Assessment to comply with Act and Rules

As required

H. H. Trivedi M.M. Patki

H.N. Sorathia Sanat Pandya

COMPETENCY UNDER THE FACTORIES ACT, 1948 AND THE GUJARAT FACTORIES RULES, 1963

H. H. Trivedi GUJ/DISH/CPT/A/0002 Sec 28/ Rule 58

- Form 9

Inspection, Testing & Certification of Lifts/Hoists. Every

6 Months

H. P. Trivedi GUJ/DISH/CPT/A/0242 A.C. Dave GUJ/DISH/CPT/A/0254 R.S. Buch GUJ/DISH/CPT/A/0292

R.M.Kanzariya GUJ/DISH/CPT/A/0291 J.J. Shah GUJ/DISH/CPT/A/0232

D. M. Vaidya GUJ/DISH/CPT/A/0072 Vinod Gohel GUJ/DISH/CPT/A/0233 H. H. Trivedi GUJ/DISH/CPT/A/0002 Sec 29/

Rule 60 -

Form 10

Inspection, Testing & Certification of Lifting Machines, Lifting Tackles, Cranes, Wire Rope/Chain Slings, D’shackles, Wire/Nylon belt slings, etc.

Every 12

months



D. M. Vaidya GUJ/DISH/CPT/A/0072 Vinod Gohel GUJ/DISH/CPT/A/0233 H. H. Trivedi GUJ/DISH/CPT/A/0002

Sec 31/ Rule 61

- Form

11

Inspection, Testing & Certification of Pre. Vessels & Plant, Safety Valves (including calibration), etc. External examination Hydraulic testing (If no internal examination) Hydraulic testing (if Internal examination possible)

Every 6

months

2 Years 4 years



D. M. Vaidya GUJ/DISH/CPT/A/0072 Vinod Gohel GUJ/DISH/CPT/A/0233 M.M. Patki GUJ/DISH/CPT/A/0008



Competent Person


Section & Rule


Inspection Period


Safety against rotating/moving machinery Dangerous machines, - Centrifugal Machines, Power Press, etc.

Every 12

months

A.C. Dave GUJ/DISH/CPT/A/0290 D. M. Vaidya GUJ/DISH/CPT/A/0072 Vinod Gohel GUJ/DISH/CPT/A/0233 M.M. Patki

GUJ/DISH/CPT/A/0008

Sec 36/ Rule 64 Certification for entering in Chamber,

Tank, Pit, Confined space, etc. having presence of gas, fume, dust, etc, to involve risk.

As required

M.M. Patki GUJ/DISH/CPT/A/0008 Sec 41 &

Sec 112

Provisions for hazardous processes, Thermic fluid heaters, Ovens/Dryers, Ship breaking yard activities

Every 12

months


- Form 26A

Safety against dangerous process, or operation, exposure of workman, display of notice, restricted entry, etc., Provision of Ventilation System.

As required

A.C. Dave GUJ/DISH/CPT/A/0290

D. M. Vaidya GUJ/DISH/CPT/A/0072

M. J. Vaghela GUJ/DISH/CPT/A/0077 Sec 6 &

112 - Civil

Inspection, testing & Certification of Plant and Structures and issuing of Stability Certificate for New buildings or alterations in industry

Every 5 years

K.M. Thakkar GUJ/DISH/CPT/A/0169

COMPETENCY UNDER THE FACTORIES ACT, 1948 AND THE MAHARASHTRA FACTORIES RULES, 1963

D. M. Vaidya

V-010/2013

Sec 28/ Rule 62

Inspection, Testing & Certification of Lifts/Hoists (Form 11)

Every 6

months

D. M. Vaidya

V-010/2013

Sec 29/ Rule 64

Inspection, Testing & Certification of Lifting Machines, Lifting Tackles, Cranes, Wire Rope/Chain Slings, D’shackles, Nylon belt slings etc.(Form 12)

Every 12

months

AUTHORISATION FOR TRAINING INSTITUTE UNDER SECTION 111-A

T&ATSPL DISH/A-KAYADA/1150/2012

Factories Act 1948 Section 111-A

Approved Training Institute Under Section 111-A of Factories Act 1948 by Director, Industrial Safety & Health Dept., Government of Gujarat

As and when

Require

CERTIFICATES IN ASNT SNT TC-1A (LATEST EDITION) – FOR NDT LEVEL - II

H.H. Trivedi

PM/UT/34/2011 PM/DPT/09/2011 PM/MT/18/2011 PM/RT/25/2011

Ultrasonic Thickness Testing as per NDT method – NDT Level - II

As and when

Require A.C. Dave PM/UT/32/2012

R.C. Dhamecha PM/UT/33/2012

P.A. Parikh PM/UT/31/2012

A.I. Sheth PM/UT/34/2012


SUPPORT FACILITIES TO UNDERTAKE VARIOUS ACTIVITIES

Sr. No.

Technical Particulars of Facility / System

Application in Activity

TESTING OF EQUIPMENTS & TACKLES FOR COMPETENT PERSON ACTIVITIES

Motorized Air compressor Self-assembled Additional Test Kit

Field Testing of Safety Valves Range: 0–35 kg/cm² Range: up to 140 kg/cm²

Motorized Hydraulic Pressure Testing Pump

Pressure: 220 Kg/cm²

Digital Sound Level Meter LUTRON make, Model: SL-4001

Measuring of Noise level, Range: 35 – 130 dB

Digital Dynamometer ADI ARTECH Make

For Load Testing of Lifting M/c., Tackles, Range: 0 - 20 T – 4 Sets 0 - 7.5 T - 1 Set

Ultrasonic Thickness Gauge MODSONIC make – 4 Sets

Measurement of Plate thickness, Range: 2 mm – 300 mm, Temp up to 250° C with HOT & Cold Probe

Hydraulic Pump – 3 nos. (Manual)

For hydraulic testing of equipment Range: up to 350 kg/cm²

Manometer

Measurement of small pressure Range: -1 to +1 kg/cm²

Standard Test Pressure Gauges Total: 8 nos.

Pressure gauge/ valve calibration 0-10 kg/cm² 0-16 kg/cm² 0-25 kg/cm² 0-40 kg/cm² 0-100 kg/cm² 0-600 kg/cm²

Vernier caliper – 7 nos. Aerospace Make

Precision Measurement of thickness size: 6” (150mm)-3 Nos size: 12” (300mm)-1 No.

Spark Tester Range: 0.5KV to 10KV Doktor make Dynamometer Digital Type for Load Test

For finding leakage current 20 MT – 5 Nos. 7.5 MT – 1 No.


Sr. No.

Technical Particulars of Facility / System

Application in Activity

INSTRUMENTS FOR ENERGY AUDIT AND INSTRUMENT CALIBRATION Digital Differential Pressure Indicator,

Model: PC-UC-45M PRECISION CALIBRATOR make

Measurement of mA and mV with RTD: -200 to 600° C

Micro Manometer with Pitot Tube, FITZER Make

Measurement of air pressure in ducts Range: 0 – 8000 CFM

Dead Weight Tester SYSTEM ENGG. Make

Measurement of pressure gauges, Range: 2 – 200 kg/cm²

Test Pressure Gauge MASS make

Calibration of pressure gauges, Range: 0-400kg/cm²

Manometer Tube type Measurement of low pressure Range: -1 to 1 kg/cm²

Standard Test Pressure Gauges Total: 12 nos.

Pressure calibration, Diff ranges incl. Oxygen free Service

Temperature Bath, 2 nos. Self assembled

Calibration of temperature instruments 0 – 1000° C

ELECTRICAL TESTING INSTRUMENTS Testing Kit for Amp/Voltage

Self assembled. Measurement of Current/Voltage

Range: 0 – 5 Amp, 0 – 750 Volts

Relay Testing Kit A.E., Bangalore make

Testing of Over current/Earth fault Relays, Range: 0 – 200 Amp

Transformer Oil Test Set High Voltage make

Testing of oil Range: 0 – 60 kV

High Voltage Test Set Allied make

High voltages testing of equipment 0 – 60 kV

Phase Sequence Meter MECO make

Check of system phase sequence

Megger 1 No. imported 3 Nos. MECO make

2500 V, Hand operated 500 V, Hand operated

D.C. Ammeter A.C. Ammeter

Range : 0-30 Amp Range : 0-100 Amp

Earth Tester – 3 nos. “Shanti” make

To measure the value of earth resistance Range : 0 - 3 - 30 ohms

INSTRUMENT FOR TANK CALIBRATION Standard Steel Tap.

For Tank Calibration

Range : 15 mtrs


INSTRUMENTS USED FOR INSTRUMENT CALIBRATION

Sr.No. Name of Master Instrument Range

Pressure Guage-Digital with Pump, Type: Digital Range: -250 to +250 mmWC

Pressure Guage-Lease Count Type: Helical Range: 0 to 200 kg/cm²

Pressure Guage - OXYGEN Model: OXYGEN-PG-12 Range: 0 - 10.6 kg/cm↓3

Pressure Guage Range:0-600 kg/cm²

Vacuum Guage Type : Bourdon Range: 0-760 mmHg

Digital Multimeter (02 Nos.) --

Temperature Bath Model: Oil Bath (OB-250) upto 250°C

Digital Temperature Scanner Type-K Range: 0 to 1200ºC

Hygro Thermo Meter Temp: -20 to 50°, Humidity: 0 to 100%rh

RTD Test Kit Range: -5-400°c

Universal Calibrator Range:0-200 mV

Temperature Sensor J – Type Range: 99 to 750

Temperature Sensor K - Type Range: 99 to 999

Temperature Sensor PT100 – Type Range: 99 to 850

Mano Meter Range:0-49 kg/cm²

Dead Weight Tester with Weight Box (A) 15 no (B) 17 no Range: 2-200 Kg/cm²

Safety Valve Test Bench (02 Nos.) Range: 0-150 Kg/cm²

Digital Temperature Indicator ADI make, Model: DTIC-3511 Range: 0 – 1200° C

Hand held hydraulic pressure pump with Digital Pressure Gauge (for Pressure Gauge & Vacuum Gauge)

Pump: Range: 0-400 Kg/cm² Digi. PG: 0-400 Kg/cm²


VALUED CLIENTS – COMPLIANCE TO THE FACTORY ACT 1948 Name of Clients Name of Clients

M/s. Reliance Industries Ltd., M/s. Asha Cellulose (I) Pvt. Ltd., Group of Companies Valsad. RIL - Jamnagar M/s. New India Biz-Chem. Pvt. Ltd., RIL - Vadodara Nandesari, Dist: Vadodara RIL – Dahej M/s. G.N.F.C. Ltd., RIL - Hazira Narmadanagar Dist: Bharuch. REAL - Mumbai M/s. Panoli Intermediate (India) Pvt. Ltd. GCPTCL - Dahej Nandesari, Dist:Vadodara RGTIL - Mumbai M/s. Shaily Engg. Plastics Ltd., M/s. Reliance Infocomm Ltd. Tal: Savli, Dist: Vadodara. Ahmedabad M/s. Sodium Metal Ltd. M/s. Alembic Limited Nandesari, Dist: Vadodara Group Companies M/s. Costal Gujarat Power Ltd Alembic Ltd- All Baroda plants. Mundra Alembic Ltd- All Halol Plants M/s EMCO Ltd. (Formarly:Urja Engg. Ltd.) Shreno unit – I Asoj, Vadodara Shreno unit – II M/s Urja Power PTE Ltd. Light Publication (Div. of Sierra Invest. Ltd.) Asoj, Vadodara. Shreno Ltd (Glass Div.) M/s Gammon India Ltd Viramya Packging Ltd GROUP OF COMPANY M/s. National Thermal Power Corp. Ltd. Dahej, Mundra, Jamangar Jhanor & Kawas M/s Indwell Construction Pvt. Ltd. M/s. Gas Authority of India Ltd., Mundra Waghodia, Baroda, Kandla, Samkhyali, Kadi, M/s Gujarat Polybutanese Ltd., Ahmedabad, Mehsana, Bharuch, Jamnagar Petrofils, Dist: Vadodara M/s Ingersoll-Rand (I) Ltd., M/s. Indo Amines Ltd. Naroda, Ahmedabad Tundav, Dist. : Vadodara M/s Essar Oil Limited.( Refinery Divison) M/s. Hikal Limited Jamnagar Panoli, Bharuch M/s. Essar Projects (India) Ltd. M/s. Harson Laboratories Ltd. Jamnagar, Nadiad Vadodara M/s. Excel Crop. Care Ltd. M/s. IOT Engineering Projects Ltd. Bhavnagar Vadodara, Mundra, M/s. Larsen & Toubro Ltd., M/s. Power Mech Project Ltd Group of Companies Mundra, Jamnagar RIL Site, Mundra Site M/s. Simplex Infrastructure Ltd M/s. Torrent Cables Ltd. (Nadiad) Mundra, Kamrej M/s. INEOS ABS Limited. M/s. Gujarat Alkalies Chemicals Ltd. Moxi & Nandesari Ranoli, Dist. : Vadodara M/s. Hindalco Industries Ltd. M/s. Afcon Infractructure (Unit: Birla Copper), Dahej, Jamnagar M/s. B.M.S. Chemie M/s. Contract Resources Petrochem Services Akalbara, Nandessari Jamnagar M/s. Steelcast Limited, M/s. Dhaval Engineering Co. Bhavnagar Jamnagar M/s. PAB Organics Pvt. Ltd. M/s. Sulzer Chem. Tower Field S. (I) Pvt. Ltd Nandesari, Dist: Vadodara. Jamnagar M/s. Hazira LNG Pvt. Ltd. (Shell) M/s. Tonira Pharma Ltd Hazira, Dist. Surat Nandesari, Dist : Vadodara M/s. G.I.P.C.L, M/s. Ami Life Science Pvt. Ltd. Petrofils, Dist: Vadodara. Karakhadi, Dist : Vadodara M/s. Camphor & Allied Industries Ltd. M/s. Steller Chemicals Laboratories Pvt. Ltd. Nandesari, Dist: Vadodara Derol, Dist : Panchamahal M/s. Sabari Chemical Pvt. Limited, M/s. Solaris Biochemicals Limited Nandesari, Dist: Vadodara Karakhadi, Dist : Vadodara TATA Motors M/s. Solitaire Machine Tools Ltd., Sanand, Ahmedabad (Nano Project) Chhani, Dist : Vadodara


VALUED CLIENTS – COMPLIANCE TO THE FACTORY ACT 1948 Name of Clients Name of Clients M/s. Sabari Aromatics Pvt. Ltd. M/s. Randhawa Construction Company Nandesari, Dist:Vadodara. Jamnagar, Dahej M/s. Sud-Chemie India Pvt. Ltd., M/s. Pressure Parts Engg. Company Nandesari, Dist: Vadodara. Vadodara M/s. Plastichemix Industries M/s. Petronet LNG Limited Savli, Nandesari & Kalol Dahej, Dist. : Bharuch M/s. Cadila Healthcare Ltd., M/s. ITD Cementation India Ltd. Tal: Padra, Dist: Vadodara. Ahmedabad, Hazira, Pipava, Dahej M/s. Link Pharma Chemi Ltd., M/s. Sew – Eurodrive India Pvt. Ltd. Nandesari & Ankleshwar Ramangamdi M/s. SRF Ltd. M/s. Gujarat Narmada Fertilizers Co. Ltd. Dahej Bharuch

VALUED CLIENTS – STABILITY Name of Clients Name of Clients M/s.Deesha Organics Pvt. Ltd.

Nandesari M/s.Crompton Greaves Limited

Padra M/s.Plastichemix Industries (K)

Kalol M/s.Alembic Limited - (B)

Baroda M/s.Jubilant Organosys Ltd.

Savli M/s.Philoden Agrochem Pvt. Ltd.

Padra M/s.LARSEN & TOUBRO LTD.

Baroda M/s.VAISHVANAR ORGANICS PVT. LTD.

Nandesari M/s.Royal Cushion Vinyl Products Ltd.

Savli M/s.SHRENO LTD (UNIT - II)

Baroda M/s.Sayaji Iron & Engineering Co Ltd

Baroda M/s.Dharoya Pharmaceuticals Pvt.Ltd.

Nandesari M/s.Reliance Ports & Terminal Limited

Jamnagar M/s.Taskant Oil Mills

Nandesari M/s.Bakul Aromatics & Chemicals Ltd.

Baroda M/s.Light Publications Ltd.

Baroda

VALUED CLIENT - CENTRIFUGES, THERMIC FLUID HEATERS, OVENS & DRYERS, DUST / FUME EXTRACTION SYSTEMS

Name of Clients Name of Clients M/s.ABB Ltd.

Baroda M/s.Eshyasi Pharma Limited

Baroda M/s.Alembic Limited - (B)

Baroda M/s.Excel Crop Care Limited

Bhavnagar M/s.Alembic Limited (API Division)

Halol M/s.Gujarat Dyestuff Industries (U-I)

Nandesari M/s.Alembic Limited (API-II)

Halol M/s.Link Pharma Chem Ltd. (N)

Nandesari M/s.Alembic Limited (K)

Karkhadi M/s.Lubrizol Advanced Materials I P Ltd

Savli M/s.Ami Life Sciences Pvt Ltd.

Kharkhadi M/s.PAB Organics Pvt. Ltd.

Nandesari M/s.Avani Petrochem Pvt. Ltd.

Halol M/s.Plastichemix Industries (N)

Nandesari M/s.B. M. S. Chemie

Nandesari M/s.Sodium Metal Pvt. Ltd.

Nandesari M/s.Cadila Health Care Ltd. (U-II)

Padra M/s.Solaris Chemtech Industries Limited

Padra M/s.Camphor & Allied Products Limited

Nandesari M/s.Steller Chemical Laboratories Pvt Ltd

Halol M/s.Deesha Organics Pvt. Ltd., Nandesari M/s.Wadera Chemicals, Nandesari


VALUED CLIENTS FOR SMPV (RULE 18,19 & 33)

Name of Clients Name of Clients M/s.Cargill India Pvt.Ltd

Kutch M/s.Reliance Industries Ltd (B)

Baroda M/s.Gujarat Chemical Port Terminal Co. Ltd.

Dahej M/s.Reliance Petroleum Ltd. (JERP)

Jamnagar M/s.Gulbrandsen Chemicals Pvt. Ltd.

Padra M/s.Sharp Petrochem

Savli M/s.Hindalco Industries Ltd.

Dahej M/s.Sodium Metal Pvt. Ltd.

Nandesari M/s.Hindustan Oil Exploration Co. Ltd.

Baroda M/s.Steel Cast Limited

Bhavnagar M/s.INEOS ABS (India) Ltd

Nandesari M/s.Transpek Industry Limited

Padra M/s.Jubilant Organosys Ltd.

Savli M/s.Vindeep Expo Engineers

Vapi

VALUED CLIENTS FOR PETROLEUM RULE 126 & 130 Name of Clients Name of Clients M/s Hindustan Oil Exploration Co. Ltd.

Baroda M/s Mundra Port & Special Economic Zone Ltd.

Mundra M/s Cargill India Pvt.Ltd

Kutch M/s Gujarat Chemical Port Terminal Co. Ltd.

Dahej M/s Indian Oil Copration Limited

Mathura M/s Shandong Tiejun Electric Power Engg.Co.Ltd.

Mundra M/s Sodium Metal Pvt. Ltd.

Nandesari M/s. Chembond Chemicals Limited

Dudhawada, Padra M/s Power Mech Project Limited (C/o CGPL)

Mundra

M/s Anushakti Chemicals & Drugs Ltd. Kutch

M/s Indian Oil Copration Limited Baroda

VALUED CLIENTS – ENERGY AUDIT WORK

Name of Clients Name of Clients M/s. Plastichemix Industries Ltd. M/s. Transmetal Limited Nandesari, Rania, Kalol Padra M/s Avani Petrochem P. Ltd. M/s. Excel Crop Care Ltd. Halol Bhavnagar. M/s GSECL M/s. Gujarat Polybutane Ltd. Kutch P.O. Petrofils, Dist: Baroda M/s. TML Industries M/s Hindustan Petroleum Corporation Ltd.. Jambusar Nandesari. Vadodara. M/s. Alembic Limited M/s. Haldyn Glass Ltd. Halol, Karkhadi Near Padra, Dist: Baroda M/s. Shri Dinesh Mills Ltd. M/s Shree Rajeshvaranand Paper Mills. Baroda, Ankleshwar Vill: Govali. Dist: Bharuch. M/s. Synergy Chlorination P. Ltd. M/s Inarco Ltd. Nandesari Bhavnagar.


VALUED CLIENTS OF SAFETY AUDIT & ON SITE EMERGENCY PLAN

Name of Clients

Name of Clients M/s Gujarat Alkalies & Chemical Limited. M/s. Solaris Chemtech Ind. Ltd Petrochemicals, Dist: Vadodara. Padra M/s. Hindustan Packaging Co. Ltd., M/s. Plastichemix Industries Itola, Baroda Rania M/s. Hindustan Petroleum Co. Ltd. M/s. Gujarat Polybutenes Pvt. Ltd. Nandesari, Dist.: Vadodara. Baroda M/S Transpek Silox Industries M/S Link Pharma Chem Ltd. Atladra. Vadodara. Nandesari, Dist.: Baroda M/s. Galpha Laboratories Ltd. M/S Aqrocel Industries Ltd. Ankleshwar, Dist. : Bharuch Bhuj, M/s. Koch Chemical Technology Group I.P.L M/S Bharat Petroleum Corporation Ltd. Savli Baroda M/s. Nirma Ltd M/s. BMS Chemie, Savli Nandesari, Dist. : Baroda M/S GSECL M/s Tonira Pharma Limited Kutch Nandesari, Dist. : Baroda M/s. Transpeck Industries Ltd. M/s Hindalco Industries Ltd. Ekalbara Dahej, Dist.: Bharuch M/s. Hazira LNG Pvt. Ltd M/s Aegis Gas (LPG) Private Limited Surat Bombay

VALUED CLIENTS FOR TANK CALIBRATION

Name of Clients

Name of Clients M/s. Reliance Petro Marketing Pvt Ltd. M/s. Link Pharma Ltd. (Approx. 200 Tank Of Whole Gujarat State Petrol Pumps) Nandesari M/s. Excel Crop Care Ltd. M/s. Luna Chemical Ltd. Bhavnagar. Ankleshwar M/s. Ashwin Vanaspati Ltd. M/s. Precision Wires Ltd. Savli. Baroda. Bharuch M/s. Alembic Ltd. M/s. Gandhar petrochemical Ltd. Vadodara. Bharuch M/s. Gujarat Dye Stuff Industries Ltd. M/s. Tonira Pharma Ltd. Nandesari Nandesari M/s. Panoli Intermediates Ltd. M/s. Amoli Organics Ltd. Nandesari Padra M/s. Amoli Organics Ltd., M/s. Ashok Organics Ltd. Luna, Tal: Padra, Dist: Vadodara. Ankleshwar M/s. Shree Ganesh Oleochem Pvt. Ltd. M/s. Avani Easter Ltd. Raipur Nandesari M/s. Transmetal Ltd. Jambusar


VAULED CLIENTS - INSTRUMENT CALIBRATION WORK

Name of Clients

Name of Clients

M/s Reliance Industries Limited (J) M/s Panoli Intermediate (India) Pvt. Ltd.

Jamnagar Nandesari, Vadodara

M/s. Alembic Ltd. M/s. Indo Amines Ltd..

Vadodara Savli, Vadodara M/s. Excel Crop Care Ltd., M/s. Steel Cast Ltd., Bhavnagar Bhavnagar M/s Jubilant Organosys Ltd. M/s. PAB Organics Ltd., Savli, Vadodara Nandesari M/s. Sabari Chemicals Pvt. Ltd, M/s. Sud-Chemie India Ltd., Nandesari, Vadodara Nandesari, Vadodara M/s. Sodium Metal Pvt Ltd M/s. Link Pharma Chemical Ltd.. Nandesari, Vadodara Nandesari, Vadodara

M/s. Camphor & Allied Ind. Ltd., M/s. Harson Laboratories.,

Nandesari, Vadodara Akota, Baroda M/s. Torrent Cables Ltd., M/s. BMS Chemie, Nadiad Nandesari, Vadodara. M/s. Indian Oil Corporation Ltd.. M/s. Cadila Health Care Ltd Ranoli, Vadodara Padra, Vadodara M/s. Hindalco Industries Ltd. M/s. Aquagel Industries Ltd Dahej, Bharuch Bhavnagar


VALUED CLIENTS OF ENGINEERING CONSULTANCY SERVICES

Name of Clients

Activities

M/s Pimac Engg & Services 4 MW Gas Turbine based CPP, elect. system Bangalore, for Alembic Ltd., interface with existing system, cable Baroda. schedules, panel layouts, inst. hook-up, etc. M/s. GE Plastic India Limited Feasibility study for power supply change- P.O. Jawaharnagar, Baroda over from IPCL to GEB incl. of Cost Estimate for equipment/HT line work. M/s. Lark Engineers Complete Designing of ONGC Gas metering Baroda system electric power supply, MCC specs, cable sizing, layout preparation, lighting system designing, material take-off, etc. (ONGC, Hazira, Surat, EIL consultant) M/s. Royal Cushion Vinyl Ltd., Techno-economic feasibility study for the P.O. Garadhiya, Tal: Savli proposed captive power plant project, Alternative technologies, cost of steam and Power, cost estimate, etc. M/s. Chemie-Tech LLC Designing of PCC, MCCs, Battery, Charger M/s. BAPCO RFO Recovery Project at with Batteries, MLDB, MPDB, LT XLPE Cable, Behrain Earthing System, FLP/NFLP Lighting System in Tank Farm Area, Street Lighting, Plant Lighting, Office Building Lighting etc. Cable trays, Steel Structure etc as per the British Standard and Bapco Standard with area Classification zone - II M/s. Royal Cushion Vinyl Ltd., Techno-economic feasibility study for the P.O. Garadhiya, Tal: Savli proposed captive power plant project, Alternative technologies, cost of steam and Power, cost estimate, etc. M/s. Electrotherm Ltd. Detail engineering for the installation of Power (For M/s. BAFA - Behrain), Ahmedabad /Furnace/Auxillary Transformer, HT / LT Switchgear Switchgear


VALUED CLIENTS OF ENGINEERING CONSULTANCY SERVICES

Sr. No.

Name of Clients

Activities

M/s. Camphor & Allied Products Ltd. Electrical equipment specification to procure- PO. Nandesari, Dist. : Vadodara ments & installation of 11 kv Switchgear, 11 kv Transformer, 1.1 kv PCC Panel, HT & LT Cables etc. M/s. L&T Ltd. (Heavy Engg. Div.) Electrical consultancy & detail engineering At & PO : Ranoli for their expansion of Bay 3 & 4 and for their Dist. : Vadodara 800 KVA Demand M/s. ABB Ltd. Electrical consultancy & detail engineering At & PO : Maneja for the testing bed - 02 & 03 of HV Machines Dist. : Vadodara & testing facilities. M/s. Rubamin Ltd. Detail engineering for the electrical wiring of Vill. : Dunia, Ta, Halol their QC laboratory with SLD, Equipment Dist. : Panchamahal Layout & illumincation Layot. M/s. JMC Project India Ltd. Detail engineering for the laying of cables, (M/s D R Garments India Pvt. Ltd. cable trays, structure cabling/wiring, power Porbandar) wiring, control circuits, lighting Distribution Board, Power Distribution Boards, Lighting Layouts, Street Light & Flood Light Poles.


GOVERNMENT DOCUMENTS

PAN CARD

SERVICE TAX REGN.


THANKS FOR REVIEWING OUR PROFILE

PVT. LTD.

REGN.

P.F. REGN.

Documents

TATSPL_Profile.pdf