TA/TR SeriesR

EL

AY

& S

OC

KE

T

I1

Distance btwn

Terminals

A 5.08mm

R 7.62mm

Voltage

5 5V DC

12 12V DC

24 24V DC

T A - 1a 5

Ordering Information

DimensionsTA Series

TR Series

TAS (Socket for TA)

TRS (Socket for TR)

Specifications

Time of operation maximum rated voltage at 6ms

Time of interruption maximum tated voltage at 3ms

Insulation resistance 1,000MΩ min. (500VDC)

WithstandVoltage

between contact pointsBetween contact points and coil

1,000VACrms per minute2,000VACms per minute

Surge voltage Between contact points and coil 4,000V

Life span MechanicalElectrical

Over 10,000,000 timesOver 100,000 times under rated load

Vibrationresistand

CounterShock

Functional

Destructive

Functional and destructive

Min. 147m/s²(15G), 10~55Hz(width of vibration:2.5mm)Min.

Min. 205.8m/s²(21G), 10~55Hz(width of vibration: 3.5mm)

15G min. (147m/s²)100G min. (980m/s²)

Ambient temperature -40°C ~ + 70°C (non-freezing)

Ambient humidity 5% ~ 85% RH

Weight Approx. 3g

* The above mentioned minimum switching rating is only referential. The referenced value varies according to the make and break frequency, environmental condition and anticipated credibility level. Therefore, it is recommended that tests be done with actual load value before the production process.

Contact point composition 1 Form A (SPST)

Contact point material Gold-clad Silver alloy

Initial contact resistance 30m max,

Rated current(resistance load)5A 30V DC

5A 250V AC

Current rating 5A

Maximumswitch capacity

DCAC

150W1,250VA

Maximum Switch Voltage 110V DC250V AC

Minimum switching rating* 1mA 5V DC

Voltage specification 5VDC ~ 24VDC

Power consumption 120mW, 180mW

Minimum operating 70% of rated voltage

Maximum cut-off voltage 5% of rated voltage

Insulation Class F 155°C

Con

tact

Spe

cifica

tion

sCoi

l Sp

ec.

Miniature size (width 5mm, height 12.5mm) high density and easy to installExtended switching capability (1mA 5VDC to 5A 250VAC, 30VDC)Twin Cross Bar Contact Mechanism for enhanced contact reliabilityHigh sensitive operation: 120mW ~ 180mW (5 to 24VDC)Gold Clad Silver Alloy Contact to secure micro current conductivitySIL terminal layout Wider terminal structure (TA : 5.08mm/TR : 7.62mm)Gold plated Socket terminal (24k gold plated) Class F 155°C

Features

RE

LA

Y &

SO

CK

ET

I2

HR710 Series

Dimensions

HR710-2P Series

KLY2 Socket KLY4 Socket

HR710-4P Series

Specifications

KLY2

KLY4

PartNumbers

Standard type

HR710-2PL-220VACHR710-2PL-110VACHR710-2PL-24VACHR710-2PL-110VDCHR710-2PL-24VDCHR710-2PL-12VDC

HR710-4PL-220VACHR710-4PL-110VACHR710-4PL-24VACHR710-4PL-110VDCHR710-4PL-24VDCHR710-4PL-12VDC

Surge protection type

HR710-2PLD-12VDCHR710-2PLD-24VDCHR710-2PLC-110VACHR710-2PLC-220VAC

HR710-4PLD-12VDCHR710-4PLD-24VDCHR710-4PLC-110VACHR710-4PLC-220VAC

Contact

Configuration DPDT (2a+2b) 4PDT (4a+4b)Material Silver alloy

Rated current 10ARated Max. Resistive Load 10A at 24VDC/220VAC

Max. Switching Voltage 125VDC/ 250VAC 50/60HzMin. Switching requirement 100mA 5VDC

CoilSpec.

Voltage range 6VDC to 110VDC, 6VAC to 240VAC

Power consumption AC: approx. 1.2VADC: approx. 0.9W

AC: approx. 2.5VADC: approx. 1.5W

Minimum operating voltage 80% of the rated coil voltage

Dropout voltageDC Coil: 10% of rated voltageAC Coil: 30% of rated voltage

GeneralInfo.

Operate Time 25ms max. at rated coil voltageRelease time 25ms max.

Insulation resistance 100MΩ at 500V DC

Dielectric StrengthBetween Contact: 1,000 Vrms 1Min.Between Contact & Colil: 1,500Vrms 1Min.

Mechnical life at no load 1,000,000 operationsElectrical life at rate load 100,000 operations

Vibration resistant 10~55Hz at double amplitude of1.5mmAmbient temperature -25 ~ +55°C(-13°F~131°F) at non freezing

Ambient Humidity 35% ~ 80% RHWeight 33g(1.2oz) 65g(2.4oz)

SocketSocket part number KLY2(DIN Rail), KT08-0(PCB) KLY4(Din Rail)

Termial Tightened Torque 0.5N • m (5.10kgf • cm)

710 Series are designed with compact housing & ICE cube style, silver alloy contact, LED indicator, high reliability and long lifeAvailable Serge protection type to protect malfunction of PLC, electronic devices from back EMF

Features

RE

LA

Y &

SO

CK

ET

I3

HR705 Series

PartNumbers

Standard type

HR705-2PL-220VACHR705-2PL-110VACHR705-2PL-24VACHR705-2PL-110VDCHR705-2PL-24VDC HR705-2PL-12VDC

HR705-4PL-220VACHR705-4PL-110VACHR705-4PL-24VACHR705-4PL-110VDCHR705-4PL-24VDC HR705-4PL-12VDC

Surge protection type

HR705-2PLD-12VDCHR705-2PLD-24VDCHR705-2PLC-110VACHR705-2PLC-220VAC

HR705-4PLD-12VDCHR705-4PLD-24VDCHR705-4PLC-110VACHR705-4PLC-220VAC

Contact

Configuration DPDT (2a+2b) 4PDT (4a+4b)Material Silver alloy

Rated current 5A 3ARated Max. Resistive Load 5A at 24VDC/240VAC 3A at 24VDC/240VAC

Max. Switching Voltage 125VDC/ 250VACMin. Switching requirement 100mA 5VDC

CoilSpec.

Voltage range 6VDC to 110VDC, 6VAC to 240VACPower consumption AC: 0.9VA Approx. , DC: 0.9W Approx.

Minimum operating voltage 80% of the rated coil voltage

Dropout voltageDC Coil: 10% of rated voltageAC Coil: 30% of rated voltage

GeneralInfo.

Operate Time 20ms max. at rated coil voltageRelease time 20ms max.

Insulation resistance 100MΩ at 500V DC

Dielectric StrengthBetween Contact: 1,000 Vrms 1Min.Between Contact & Coil: 1,500Vrms 1Min.

Mechnical life at no load 1,000,000 operationsElectrical life at rate load 100,000 operations

Vibration resistant 10~55Hz at double amplitude of1.5mmAmbient temperature -25 ~ +55°C(-13°F~131°F) at non freezing

Ambient humidity 35% ~ 80% RHWeight 33g(1.2oz)

SocketSocket part number KMY2(Rail), KY08-02(PCB) KMY4(Rail), KY14-02(PCB)

Termial Tightened Torque 0.5N • m (5.10kgf • cm)

Dimensions

Features

Specifications

HR705-2PL Series HR705-4PL Series

KMY2 Socket KMY4 Socket KMY4S Socket

KMY4

KMY2

KMY4S

705 Series are designed with compact housing & ICE cube style,

silver alloy contact, LED indicator, high reliability and long life,

Available Serge protection type to protect malfunction of PLC,

electronic devices from back EMF

Features

Dimensions

KF083A

KF113A

RE

LA

Y &

SO

CK

ETHR707N Series

Specifications

PartNumbers

Standard type

HR707-2PL-220VACHR707-2PL-110VACHR707-2PL-24VACHR707-2PL-110VDCHR707-2PL-24VDCHR707-2PL-12VDC

HR707-3PL-220VACHR707-3PL-110VACHR707-3PL-24VACHR707-3PL-110VDCHR707-3PL-24VDCHR707-3PL-12VDC

Surge protection type

HR707-2PLD-12VDCHR707-2PLD-24VDCHR707-2PLC-110VACHR707-2PLC-220VAC

HR707-3PLD-12VDCHR707-3PLD-24VDCHR707-3PLC-110VACHR707-3PLC-220VAC

Contact

Configuration DPDT (2a+2b) 3PDT (3a+3b)Material Silver alloy

Rated current 10ARated Max. Resistive Load 10A at 250VAC

Max. Switching Voltage 250VDC/ 250VACMin. Switching requirement 100mA 5VDC

CoilSpec.

Voltage range 6VDC to 110VDC, 6VAC to 240VACPower consumption AC: Approx. 2.4VA, DC: Approx. 1.6W

Minimum operating voltage 80% of the rated coil voltage

Dropout voltageDC Coil: 10% of rated voltageAC Coil: 30% of rated voltage

GeneralInfo.

Operate Time 30ms max. at rated coil voltageRelease time 20ms max.

Insulation resistance 100MΩ at 500V DC

Dielectric StrengthBetween Contact: 1,000 Vrms 1Min.Between Contact & Coil: 1,500Vrms 1Min.

Mechnical life at no load 1,000,000 operationsElectrical life at rate load 100,000 operations

Vibration resistant 10~55Hz at double amplitude of1.5mmAmbient temperature -10 ~ +40°C(-14°F~104°F) at non freezing

Ambient humidity 35% ~ 80% RHWeight 75g(2.6oz)

SocketSocket part number KF083A (DIN Rail) KF113A (DIN Rail)

Termial Tightened Torque 0.5N • m (5.10kgf • cm)

I4

HR707N-2P Series HR707N-3P Series

KF083A Socket

KF113A Socket

707 Series are designed with octal base, silver alloy

contact, LED indicator, high reliability and long life,

Available Serge protection type to protect malfunction of

PLC, electronic devices from back EMF

RE

LA

Y &

SO

CK

ET

I5

HR730 Series

Dimensions

Specifications

730-1TB 730-2TB

730-2QB730-1QB

730-2QR730-1QR

730-1TR 730-2TR

PartNumbers

Screw Terminal &DIN Rail Mount Type

HR730-1TR - 220VACHR730-1TR - 110VACHR730-1TR - 24VDC

HR730-2TR - 220VACHR730-2TR - 110VACHR730-2TR - 24VDC

Quick Connector (#250) &DIN Rail Mount Type

HR730-1QR - 220VACHR730-1QR - 110VACHR730-1QR - 24VDC

HR730-2QR - 220VACHR730-2QR - 110VACHR730-2QR - 24VDC

Screw Terminal &Panel Mount Type

HR730-1TB - 220VACHR730-1TB - 110VACHR730-1TB - 24VDC

HR730-2TB - 220VACHR730-2TB - 110VACHR730-2TB - 24VDC

Quick Connector (#250) &Panel Mount Type

HR730-1QB - 220VACHR730-1QB - 110VACHR730-1QB - 24VDC

HR730-2QB - 220VACHR730-2QB - 110VACHR730-2QB - 24VDC

Contact

Configuration SPST NO(1a) DPST NO(2a)Material Silver alloy

Rated current 30A 25ARated Max. Resistive Load 30A at 30VDC/277VAC 25A at 30VDC/277VAC

Max. Switching Voltage DC900W/AC8, 310VA, DC750W/AC5, 500VAMin. Switching requirement 100mA 5VDC

CoilSpec.

Voltage range 6VDC to 110VDC, 6VAC to 240VAC

Power consumption

DC: approx. 1.9W6-48VAC: 1.7-1.9VA100/120VAC: 1.9-2.7VA200/240VAC: 1.8-2.6VA

Minimum operating voltage 80% of the rated coil voltage

Dropout voltageDC Coil: 10% of rated voltageAC Coil: 30% of rated voltage

GeneralInfo.

Operating Time 30ms max. at rated coil voltageRelease time 20ms max.

Insulation resistance 100MΩ at 500V DC

Dielectric StrengthBetween Contact(2a): 2,000 Vrms 1Min.Between Contact & Coil: 4,000Vrms 1Min.

Mechnical life at no load 1,000,000 operationsElectrical life at rate load 100,000 operations

Vibration resistant 10~55Hz at double amplitude of1.5mmAmbient temperature -10 ~ +60°C(-14°F~140°F) at non freezing Ambient humiditidy 35% ~ 80% RH

Weight TB Type: 90g (3.2oz), QB Type: 120g (4.2oz)

* Min. Switching requirement: If load require low current, you may consider a troubleshooting for operation. For a proper operation, a dummy resistance should be added in parallel on the load to provide current more than min. Switching requirement (100mA 5VDC)

Features730 Series are designed with DIN rail mount & Panel direct mount,

and Quick connector(#250) & terminal screw type, reliability and

long life, and pushbutton allows manual operation of the relay

RE

LA

Y &

SO

CK

ET

I6

HR723 Series

Dimensions

Specifications

HR723-2A

HR723-1C

HR723-2C

Part NumbersHR723-2A-220VACHR723-2A -110VACHR723-2A -24VDC

HR723-1C-220VACHR723-1C -110VACHR723-1C -24VDC

HR723-2C-220VACHR723-2C -110VACHR723-2C -24VDC

Contact

Configuration DPST NO(2a) SPDT NO(1a+1b) DPDT NO(2a+2b)Material Silver alloy

Rated current 30ARated Max. Resistive Load 30A at 24VDC/220VAC

Max. Switching Voltage 110VDC/250VACMin. Switching requirement 100mA 5VDC

CoilSpec.

Voltage range 6VDC to 110VDC, 6VAC to 240VACPower consumption AC: approx. 9.6VA, DC: approx. 2.8W

Minimum operating voltage 80% of the rated coil voltage

Dropout voltageDC Coil: 10% of rated voltageAC Coil: 30% of rated voltage

GeneralInfo.

Operate Time 30ms max. at rated coil voltageRelease time 20ms max.

Insulation resistance 100MΩ at 500V DC

Dielectric StrengthBetween Contact(2a): 2,000 Vrms 1Min.Between Contact & Coil: 2,500Vrms 1Min.

Mechnical life at no load 5,000,000 operationsElectrical life at rate load 100,000 operations

Vibration resistant 10~55Hz at double amplitude of1.5mmAmbient temperature -55 ~ +80°C(-67°F~176°F) at non freezing Ambient humiditidy 5% ~ 80% RH

Relay Weight 250g (8.8oz) 200g (7oz) 300g (10.6oz)