-
Titel der Prsentation | XX. Monat 20XX
-
Task Force API Accounting Process ImplementationUsage of
Accounting process for different topologiesV1.0, 14.09.2010
Titel der Prsentation | XX. Monat 20XX
-
Use of T-, W-, Z- and local Code in theImplementation Guide
Accounting and Settlement Processand consideration of special
cases:- tie-line with three ends- coupling/ maintenance bus bar
Titel der Prsentation | XX. Monat 20XX
-
1. Use of EIC-Codes and local Codes in MVD und EAR-Documents2.
Example of exchange of MVD und EAR3. Special case: tie-lines with
three ends4. Special case : coupling/ maintenance bus
barContent
Titel der Prsentation | XX. Monat 20XX
-
1Use of EIC-Codes and local Codes in MVD und EAR-Documents
Titel der Prsentation | XX. Monat 20XX
-
Process overviewThe UCTE Accounting and Settlement pyramidEAR
docMVD docUSD doc
Titel der Prsentation | XX. Monat 20XX
-
The UCTE Accounting and Settlement process: Provided
documentsThe UCTE Accounting and Settlement process is based on the
following documents1. Measurement Value Document (MVD)used for the
verification of Accounting Point Relevant data on meter data level:
message types SOMA and (SOVM: only for internal use, no data
exchange with neighboring TS0) Identification of Accounting Point
Relevant data by official 10T-Code for tie-lines, (identification
of optional additional meter data by locally assigned code or local
Z-Code for meters)2. Energy Account Report (EAR)used for the
matching of the Accounting Point data on accounting data level:
message type SOAM for matching between TSO and SOVA for agreed
values for exchange via Publication FrameworkIdentification of
Accounting Point data by official 10Z-Code for accounting point3.
UCTE Settlement Report (USR)used for the information of the UCTE
Parties about the Settlement results: message types CBSR and
CASRIdentification of Accounting Point data by official 10Z-Code
for accounting point
Titel der Prsentation | XX. Monat 20XX
-
Use of Meter Measurement data in MVD document
Titel der Prsentation | XX. Monat 20XX
-
See IG Accounting: Page 19 -21, line 410 - 462, especially line
460: use of MVD
Optional: Local Code for back-up meterMandatory: 10-T-code best
composition of meter dataOptional: Local Code for main meterLocal
Codes in order to identify meters
Titel der Prsentation | XX. Monat 20XX
-
Explanation to page 6Accounting Point Relevant data shall (must)
(mandatory) be exchanged in MVD (10T-Code). These are the meter
data , that are necessary in order to calculate the Accounting
point, hence accounting point relevant. If for example the meter
data of both ends of a tie.line are used for the calculation of the
accounting point (e.g. Accounting point is on middle of tie-line or
on border point), the meter data of boths ends of the tie-line are
accounting relevant data and have to be exchanged..Each partner is
sending in MVD the best composition (mandatory with 10-T-Code) of
the available meter data from his station (Main meter, back-up
meter) (see IG Accounting line ???). In normal cases the best
collection of meter data is the pure main meter.In addition to the
best composition of meter data (mandatory with 10-T-Code) in the
MVD the original data from main meter and back-up meter or
tele-mesurement etc. (assigned with a local code in the MVD) can
(optional) be exchanged in the MVD in order to make transparent,
how the best composition of meter data was made.
Titel der Prsentation | XX. Monat 20XX
-
Excerpt of IG AccountingExcerpt of IG Accounting:Line 429: In
the UCTE process to establish the Accounting Point Relevant data
the following rules for identification are to be used:Line 431
Accounting Point Relevant data are identified with an ENTSO-E
assigned EIC "10T-code.Line 433 Meter Measurement data are
identified with a locally assigned code or an EIC "Z-code issued by
the Local Issuing Office.
Titel der Prsentation | XX. Monat 20XX
-
Abstract MVD and EARMVD (for SOMA)Accounting Point Relevant data
are identified with an ENTSO-E assigned EIC "10T-code.
(Mandatory)Meter Measurement data are identified with a locally
assigned code or an EIC "Z- code issued by the Local Issuing
Office. (optional)
EAR (for SOAM)Agreed Accounting Point data are identified with
an ENTSO-E assigned official EIC "10Z-code. (Mandatory)
Titel der Prsentation | XX. Monat 20XX
-
2ExamplesMVD-/EAR-Document
Titel der Prsentation | XX. Monat 20XX
-
Measurement Value Document (MVD)TSO ATSO BAccounting point:
10Z-DE-FR-000050main, back-uplocal codemain, back-uplocal codeMain
and/or back-up meter data with local Code from TSO AMain and/or
back-up meter data with local Code from TSO BMandatoryAccounting
relevant data in official T-Code 10T-DE-FR-00005A for
tie-lineAccounting relevant data in official T-Code
10T-DE-FR-00005Afor
tie-lineTie-line10T-DE-FR-00005AOptionalAvailable dataAvailable
dataSOMA in MVD
Titel der Prsentation | XX. Monat 20XX
-
Energy Account Report (EAR)TSO ATSO BAccounting point:
10Z-DE-FR-000050Accounting relevant data in official 10Z-Code
10Z-DE-FR-00005AAccounting relevant data in official 10Z-Code
10Z-DE-FR-00005Aofficial 10Z-Code for accounting pointcalculation
of accounting point by means of the accounting relevant data from
TSO A and TSO Bcalculation of accounting point by means of the
accounting relevant data from TSO A and TSO BAvailable data after
receiving SOMA from TSO BSOAM in EARAvailable data after receiving
SOMA from TSO AAccounting point relevant dataAccounting point
relevant data
Titel der Prsentation | XX. Monat 20XX
-
Energy Account Report (EAR)TSO ATSO BmainNational
exception:Accounting point:10Z-DE-DE-02701I10T-DE-DE-02701STSO ATSO
BBack-uplocal CodeRemote readingAccounting relevant data official
10Z-Code 10Z-DE-DE-02701IAccounting relevant data official 10Z-Code
10Z-DE-DE-02701I
Titel der Prsentation | XX. Monat 20XX
-
3Special case:Tie-line with 3 ends
Titel der Prsentation | XX. Monat 20XX
-
Tie-line with 3 ends (1)(Sum of accounting point)TSO ATSO BLocal
CodeMeter C 10T-DE-DE-04710HLocal CodeMeter DAccounting point
1Accounting point 2MVD: the accounting relevant data is sum of
meter C and D with official 10T-Code 10T-DE-DE-04710H optional
meter data of meter C with local code optional meter data of meter
D with local codeEAR: Accounting data is sum of meter C and D with
official 10Z-Code 10Z-DE-DE-047107Note: only possible if both
accounting point are at one TSO
Titel der Prsentation | XX. Monat 20XX
-
Tie-line with 3 ends (2) (split into two lines)TSO ATSO BLocal
CodeMeter C Line 1: 10T-DE-DE-04710HLocal CodeMeter DMVD:
accounting relevant data of point 1 with official 10T-Code
10T-DE-DE-04710H accounting relevant data of point 2 with offical
10T-Code 10T-DE-DE-04711F accounting data with official 10Z-Code
10Z-DE-DE-047107 accounting data with offical 10Z-Code
10Z-DE-DE-047115Line 2: 10T-DE-DE-04711FEAR:Accounting point
1Accounting point 2Note: this is possible , if accounting point 1
is at TSO B and accounting point 2 is at TSO C(!).
Titel der Prsentation | XX. Monat 20XX
-
4Special case:Coupling / maintenance bus bar
Titel der Prsentation | XX. Monat 20XX
-
TSO ATSO B10T-DE-DE-047092SS1SS2USZZz.B.
1000100Donau-WestCouplingAccounting
pointMeteringDonau-WestCoupling/ maintenance bus bar (1)
CouplingDonau-WestImportExportImportExport000200010000000200
Titel der Prsentation | XX. Monat 20XX
-
Coupling/ maintenance bus bar (2)TSO ATSO BAccounting
pointMeteringAccounting10T-DE-DE-047092Donau-WestOptional exchange
of coupling data in MVD with local Code Accounting point relevant
data in MVD with 10T Code.
CouplingDonau-WestImportExportimportExport000200010000000200
Donau-WestImportExport020001000200
Titel der Prsentation | XX. Monat 20XX
