Folding a tape edge and easy to remove

Tape Dispenser with Edge Folding Function

39-8 Senju Motomachi, Adachi-Ku, Tokyo, 120-0041, JapanTel 03-3888-8751 Fax 03-3888-1592 http://www.yaesu1965.com

YAESU KEIKOGYO CO.,LTD

■OPTION

Features

Specifications

＊Some of usable tapes may not cut as depends on the material and tape brand.＊Cutting length may be beyond cutting tolerance as depends on the type of tapes.＊Specifications are subject to change without prior notice.

Arm StandZCUT-10RP

Folding

Easy to change the functionfor folding and normal cutting

Straight

Programing Function(Six different lengths can be programmed to cut)

5 mm - 999 mm7 mm6 mm - 60 mm300mm0.05 mm～0.3 mmCraft, PP, Vinyl, Filament, Glass Cloth, Double-Sided, Strapping,Protective Film, Aluminum Foil, and Others220 mm/sec　　・Approximately 50pcs/min. (in the case of cutting 100mm with craft tape)Separator・Blade Oil・Guide Plate・Power CordAC 100 V～240 V　　 50Hz/60Hz　　25W　　Fuse2A(AC inlet Build-in)116 mm（W）×148 mm（H）×223 mm（D）1.6 kg

T a p e L e n g t hF o l d i n g L e n g t hT a p e W i d t hMax. Outside Dia. of Roll

T a p e T h i c k n e s s

U s a b l e T a p e s

F e e d i n g S p e e dA c c e s s o r i e sR a t e d V o l t a g eD i m e n s i o nW e i g h t

・ Memory Function（Six different lengths can be memorized）・ Programing Function (Six different lengths can be programmed to cut)・ Possible to cut two roll tapes at the same time due to Dual Photo Sensor・ Tape Support to position a cut piece of tape for easy to take・ Set a tape without using bobbin・ Possible to cut non-adhesive tapes・ Build-in Separator for cutting two rolls tape, Guide Plate, and Blade Oil

Cut a tape with backing paperwhile removing it

Only supply with ZCUT-10