TANKS PRODUCTS - Pentair Aquatic Eco-Systems · These tanks have a flat depression molded into the side near the bottom for a bulkhead fitting. Models ending in -W2 have a 2’x2’

130 Steel/Custom/Liners132 Cone Bottom133 Polyethylene Tanks134 Fiberglass Tanks136 Rectangular/Bowls/Covers137 Hauling Tanks138 Storage Tanks139 Sealed/Precut Sump140 Translucent Tanks

TANKSPRODUCTS

Black Tank Liner

GALVANIZED STEEL TANKSIf you want reasonably priced tanks that may or may not be relocated later, our galvanized steel tanks are right for you. Round steel tanks are unsurpassed for strength. You can carry the sections through a pedestrian doorway, bolt several tanks together in one day with only two people and take them down just as quickly. Use liners where portability is important. Bolts included.

A sloping concrete bottom can be poured, complete with drain and heating coils. Its high strength allows many possibilities, including very large yet economical tanks (sizes available up to 105'). Deep tanks (to 14') can be built by bolting panels two or more high (please request engineering assistance). Tanks may be partially buried to conserve heat and make fish observation easier.

Many trout farmers use these tanks without liners or interior paint when their pH is near neutral. Our epoxy products or PVC liners are recommended for use wherever the galvanized surface is undesirable (galvanized steel has been used to water livestock and hold potable water for years; however, at high and low pH, zinc may be given off into the water and could pose a problem in some situations). NEVER USE COPPER SULFATE IN UNPROTECTED GALVANIZED TANKS. Prices include nuts, bolts and lap joint caulking and are FOB manufacturer.

CAPACITY SHIP WT MODEL (GAL) DIAMETER HEIGHT GAUGE (LBS) EACH

TS1520H 4,860 15' 46" 20 310 $1,080.00

TS1817H 6,990 18' 46" 17 508 1,645.95

TS2117H 9,530 21' 46" 17 610 1,918.28

TS3015H 19,450 30' 46" 15 1,085 3,434.03

Note: Allow at least a two-week lead time and additional time for shipping. Call for shipping charges.

DECIMAL TO GAUGE CHART.036 inch = 20 gauge.053 inch = 17 gauge.058 inch = 16 gauge

CUSTOM FIBERGLASS TANKSPentair is pleased to offer custom fiberglass products. Whether it is a small intricate aquarium, a transport tank or a 200,000-gallon exhibit pool, we can turn your aquatic dreams into reality.

Aquariums and tanks can be custom built to form fit available space or create eye-catching designs that will enhance any exhibit.

These custom-made products are backed by 20 years experience in custom fiberglass molding and are built to last. All products are made from high-quality materials.

• Premium resins and glass fiber produce high-strength, durable laminates.

• All built-in fittings are made with female fiberglass couplers to ensure a better bond than PVC couplers.

• PVC foam core construction adds rigidity to larger tanks.

• Urethane foam, with twice the R-value of polystyrene foam, can be used when temperature control is a factor.

• Viewing windows of tempered, laminated glass or acrylic are available.

Two-year warranty on materials and workmanship. Ships motor freight, ALLOW 6 WEEKS BUILD TIME. Call for a quotation on large quantities. Crating charges not included in prices. FOB Orlando.

Other custom devices can also be fitted to make the tank work for your application. Tanks can be foam covered for insulated applications, tank covers with solid tops or screen tops can also be fitted.

Larger tanks, such as 20’, 30’ and 40’ round or oval tanks are also available.CALL FOR MORE INFORMATION AND PRICING.

130130 TANKSGalvanized Steel/Tank Liners/Custom

Online Orders: PentairAES.com I Phone Orders: 877.347.4788

SEAMING AND PATCHING TAPE FOR POLY LINERSUse it to patch liners or join pieces for complex shapes. For use on polyethylene tarps only. Cure for 24 hours.

SMALL POND LINERS, EPDMThese black rubber, 45-mil, EPDM pond liners are specifically designed to resist the growth of microbes and algae, as well as harsh weather conditions such as frost, snow and extreme temperatures. With enhanced weatherization and increased resistance to ozone and UV exposure, these pond liners provide long-lasting performance and aesthetic appeal.Environmentally friendly, these pond liners are specifically formulated for ground and gardening projects, and are safe for most fish and plant life.

Because of the flexible design, these pond liners can easily be molded to almost any size and shape, allowing them to be used in even the mostcreative water features.

These liners are quick and easy to install. Since no heat-welding or kettles are required, this membrane can be installed in virtually any location.

Applications include reflective and decorative ponds, koi ponds, water gardens, fountains, streams and waterfalls.

Ships motor freight from the factory. Limited Lifetime Warranty

APPROX WT MODEL SIZE (LBS) EACH

SZ31 8' X 10' 25 $94.17

SZ32 10' X 15' 45 163.28

SZ33 10' X 20' 60 212.65

SZ34 15' X 20' 120 311.38

SZ35 20' X 25' 150 508.85

SZ22 20’ X 30’ 180 607.81

SZ23 25’ X 30’ 225 721.73

SZ24 30’ X 30’ 270 904.01

LARGE POND LINERS, POLYETHYLENEThese heavy-duty pond liners offer superior strength as well as puncture and tear resistance at an excellent price. They are resistant to most chemicals, salt and acids. The material will remain flexible at -70°F. Available in width increments of 10 feet and any length up to 50,000 square feet as one piece. Panels are accordion-folded every 4 to 5 feet and tightly rolled on a heavy core for ease of handling and installation. Sold by the square foot (2,500 ft2 minimum). Allow 20 days for production. Ships from factory.

SHIP WT PER 1,000 FT 2 MAXIMUM MODEL (LBS) PANEL SIZE

PE20 20 MIL 100 50,000

PE30 30 MIL 150 33,000

SEAMING/PATCHING TAPE FOR EPDM LINERSThe double-sided adhesive seaming tape, ST3-25, is made of extruded black rubber and designed to join pieces of EPDM liner together to form a watertight seal. The single-sided patching tape, PT6-25, works great for patching holes and covering seams for EPDM liners only.

ST3-25

PT6-25

MODEL TYPE WIDTH LENGTH EACH

920005 SINGLE-SIDED 4” 100’ $72.36

MODEL TYPE WIDTH LENGTH EACH

ST3-25 DOUBLE-SIDED 3” 25’ ROLL $41.99

PT6-25 SINGLE-SIDED 6” 25’ ROLL 96.99

CALL FOR MORE INFORMATION AND PRICING.

TANKSLiners/Patching Tape

131


ROUND TANKS WITH CONE BOTTOMThese marine blue polyethylene tanks are economical and provide long life expectancy. The smooth surface makes for easy cleaning, and their light weight allows for quick setup and relocation. All tanks have ultraviolet inhibitors for outdoor use. FDA-approved. A 20° degree sloping cone-bottom forces high solids to be removed through the 14” diameter center drain area (drain hole not cut out). This allows for the tanks to be self-cleaning for months at a time. The stands are made of heavy gauge steel and are sprayed with a baked-on powder coat white paint for a durable long-lasting finish. There is 12” of clearance below the bottom of the cone when placed on its stand. One-year warranty. Ships by motor freight from factory.

Above dimensions are approximate.

SEMI- SQUARE TANKS WITH CONE BOTTOMIf space is a consideration for tank layout, these semi-square, rounded-corner, polyethylene tanks will provide a greater volume of water than round tanks, while still providing very good self-cleaning capability. They are sloped for complete tank drainage. Standard color is marine blue, with black and gray available on special order. The stands are made of heavy gauge steel and are sprayed with a baked-on powder coat white paint for a durable, long-lasting finish. TP50 ships Ground; others ship motor freight.

CAPACITY NOMINAL WALL DIMENSIONS SHIP WT MODEL (GAL) (LITERS) THICKNESS A B C D (LBS) EACH

TP50 50 189 3/16” - 1/4” 26” 22” 22” 4” 25 $167.51

TP180 180 681 3/16” - 1/4” 42” 38” 26.5” 4.5” 53 368.02

TP450 450 1,703 3/16” - 1/4” 62” 58” 37” 9” 103 833.92

TP50S STAND FOR TP50 277.97



CAPACITY NOMINAL DIMENSIONS SHIP WT MODEL (GAL) (LITERS) WALL THICKNESS A B (LBS) EACH

TCB250 250 946 ¼" 60" 28" 75 $334.93

TCB450 450 1,703 ¼" 75" 26" 100 636.88

TP650 650 2,461 ¼" 85" 30" 110 668.78

TP950 950 3,596 ¼" 96" 36" 130 1,103.45

TCB1500 1,500 5,678 ¼" 102" 60" 200 1,338.89

TCB250SS STAND FOR TCB250 600.43

TCB450S STAND FOR TCB450 1,479.94

TP650S STAND FOR TP650 1,513.58

TP950S STAND FOR TP950 1,707.79

TCB1500S STAND FOR TCB1500 1,741.43

Tank & Stand sold separately

Tank & Stand sold separately

132132 TANKSCone Bottom


TP800

TP110

TP130

TP55 TP90

POLYETHYLENE TANKSThese polyethylene, marine blue, open top tanks are economical with long life expectancy. The smooth surface makes for easy cleaning, and their light weight allows for quick set-up and relocation. Edge lips provide wall strength and minimize deformation. Most of these tanks are nestable, which reduces shipping costs. FDA compliant; safe and non-toxic to aquatic and animal life. All tanks have ultraviolet inhibitors for outdoor use. Because they have superior mechanical properties, high stiffness, excellent low temperature impact strength, and outstanding environmental stress crack resistance, they stand up well in tough environments.

55 TO 250 GALLON TANKS CAPACITY INSIDE WALL SHIP WT TANK ONLY (GAL) SHAPE DIA. HEIGHT THICKNESS (LBS) MODEL EACH

55 ROUND 21" 38" 3/16" 17* TP55 $158.40

90 ROUND 39" 20" 3/16" 23** TP90 249.54

210 ROUND 48" 30" 3/16" 49** TP210 329.29

250 ROUND 60" 22" 3/16" 68** TP250 454.60

110 RECTANGULAR 55" X 31" X 18" 1/8" 44** TP110 283.72

130 MORTAR BOX 72" X 36" X 12" 1/8" 39** TP130 295.11

*Ships ground. **Ships motor freight.

410 TO 1000 GALLON TANKSThese tanks have a flat depression molded into the side near the bottom for a bulkhead fitting. Models ending in -W2 have a 2’x2’ polycarbonate viewing window installed ( actual viewing area is 213/4”x213/4”). Ships motor freight. CAPACITY INSIDE WALL SHIP WT TANK ONLY TANK WITH WINDOW (GAL) SHAPE DIA. HEIGHT THICKNESS (LBS) MODEL EACH MODEL EACH

410 ROUND 60" 34" 3/16" 74 TP440A $568.53 TP440A-W2 $739.42

460 ROUND 70" 30" 3/16" 78 TP400F 602.71 TP400F-W2 773.59

650 ROUND 77" 34" 1/4" 105 TP655 716.63 TP655-W2 902.49

800 ROUND 88" 38" 1/4" 120 TP800 887.52 TP800-W2 1,058.41

830 ROUND 92" 30" 1/4" 134 TP830 921.70 TP830-W2 1,092.60

1000 ROUND 90" 44" 1/4" 148 TP1000 1,024.23 TP1000-W2 1,194.59

TANKSPolyethylene Tanks

133


These tanks are excellent for use in hatcheries for holding live rock, marine invertebrates, etc.

FT811

FFB122 Filter Box

FIBERGLASS TANKSThese tanks are used all over Southeast Asia in hatcheries and farms raising tilapia, shrimp, tropical fish, etc. Rigid, thin-wall fiberglass is gel-coated and easy to clean. They are nestable for economical shipping. Turn these tanks into an instant system by adding a filtration module. The top-mounting filter has multiple chambers and a lid and can turn the tank into a quarantine system, holding system or even a small growout system. Tanks ship motor freight. Crating charges not included in prices when applicable. FOB Orlando

Note: the blue color may show scratches, but that will not affect the functionality of these products.

CAPACITY INSIDE* MODEL (GAL) L X W X H EACH

FT391 39 36" X 24" X 12" $150.04

FT811 81 48" X 30" X 15" 382.02

FT1221 122 60" X 30" X 18" 490.84

FT2351 270 72" X 36" X 24" 873.63

FT5231 523 96" X 48" X 30" 1,867.29

FFB122 FILTER BOX FOR FT811 & FT1221 33.5" X 7" X 10" 99.70

FFB235 FILTER BOX FOR FT2351 39" X 7" X 10" 122.92

FFB523 FILTER BOX FOR FT5231 53" X 10.5" X 16" 258.65

FIBERGLASS TROUGHSRectangular troughs are used for hatching fish eggs, coral propagation, baitfish, larval rearing (use with McDonald-type hatching jars), invertebrate holding and many other culture applications. Although not as thick as our reinforced fiberglass tanks, they are still quite durable. Light blue gel coat interior. Troughs are stackable and ship via motor freight, Crating charges not included in prices when applicable. FOB Orlando.

Note: the blue color may show scratches, but that will not affect the functionality of these products.

CAPACITY MODEL (GAL) L X W X H EACH 4+

FT120L2 120 96" X 24" X 12" $322.13 $289.92

FT180L2 180 96" X 36" X 12" 557.46 501.71

FT240L2 240 96" X 48" X 12" 753.63 678.27

FT320L2 320 96" X 48" X 16" 1,045.50 940.95

*For outside dimensions, add 6” each to L and W (add 3” for filter boxes).

134134 TANKSFiberglass


FIBERGLASS LARVAL TANKSThese rugged, circular fiberglass tanks are ideal for Artemia/rotifer culture, hatcheries and small holding system larval growout. Made of reinforced fiberglass with a smooth, gel-coated interior. Flat bottom with vertical sides and a center drain port. PVC couplers are molded into the base of the tank to allow varying tank heights. Tank legs over 20" are not recommended. Tanks ship motor freight, FOB Orlando.

CAPACITY MODEL (LITERS) A B C D E EACH

FRP60 60 17" 14" 22" 2" 1" $341.76

FRP163 163 26" 24" 213/4" 2" 1" 538.58

FRP300 300 341/4" 31" 215/8" 3" 11/2" 666.18

FRP500 500 421/2" 38" 215/8" 3" 11/2" 826.43

FIBERGLASS TANK WITH WINDOWIncludes 1/2" thick tempered glass viewing window, blue gel coat interior and white exterior.

CAPACITY SHIP WT MODEL (GAL) L W H (LBS) EACH

S390-AQ-2 90 36” 24” 24” 78 $931.35

CAPACITY INSIDE* SHIP WT MODEL (GAL) L X W X H (LBS) EACH

FT128W2 150 48" X 30" X 24" 102 $514.60

FT160W2 180 60" X 30" X 24" 132 669.87

FT235W2 270 72" X 36" X 24" 165 961.95

FT336W2 405 72" X 36" X 36" 195 1,272.71

FT523W2 600 96" X 48" X 30" 395 1,949.75

FT632W2 720 96" X 48" X 36" 493 2,397.85 FT632W2

FIBERGLASS TANKS WITH WINDOWThese models are gelcoated and have thick sidewalls! Raise tilapia, shrimp, tropical fish, etc. Rigid, 5-mm fiberglass is easy to clean. The tanks are sturdy and nestable for economical shipping. Add a filtration module to instantly turn the tank into a quarantine, holding or growout system. Tanks ship motor freight. Crating charges not included in prices. FOB Orlando.

Note: the blue color may show scratches, but that will not affect the functionality of these products. *For outside dimensions, add 6” each to L and W.

• Pentair Product Showcases• Customer Testimonials• Event Highlights

• Industry Spotlights• Instructional Videos• Company Overview

YouTube.com/AquaticEcoTV

WATCH OUR CHANNEL

Subscribe for Our Latest Videos:

TANKSFiberglass

135


RT74-B

RT150-B

RECTANGULAR TANKSThese rectangular polyethylene tanks are great for a variety of applications, including sumps, filter boxes, bait tanks and holding tanks. Larger tanks will bow slightly when full of water. All have UV inhibitors for outdoor use. These heavy-duty tanks are nestable. RT37-B and RT16-B and smaller ship Ground, RT58-B and larger ship motor freight.

CAPACITY SHIP WT MODEL (GAL) L X W X H* (LBS) EACH

RT16-B 16 12" X 18" X 18" 8 $92.87

RT37-B 37 12" X 24" X 30" 15 144.40

RT58-B 58 15" X 30" X 30" 20 168.27

RT74-B 74 20" X 24" X 36" 26 203.43

RT89-B 89 24" X 24" X 36" 33 234.57

RT150-B 150 30" X 36" X 32" 44 367.15

RT180-B 180 33" X 49" X 24" 52 469.79

KOI SHOW BOWLS KOI

These economical, polyethylene koi bowls come in two styles: light- duty (191/2 gallons) for the koi hobbyist, and heavy-duty (23 gallons) for the commercial farmer. The royal blue color is excellent for showing koi colors. Ship Oversize.

CAPACITY SHIP WT MODEL (GAL) DIAMETER X HEIGHT (LBS) EACH

KB4 19.5 21" X 11" 4 $47.84

KB9 23 27" X 12" 9 80.06

*Dimensions do not include top wide lip.

TC14

SHIP WT MODEL (LBS) EACH

TC14 FITS 3'–4' ROUND TANK 3 $40.13

TC16 FITS 5'–6' ROUND TANK 3 64.22



TC13 FITS 3' X 4' RECTANGULAR TANK 3 34.82

MESH NETTING TANK COVERSKeep fish in and birds out!Made of black polyester, 1/4" mesh netting, these covers are great for preventing fish from jumping out of tanks. They feature a drawstring and locking device to hold covers firmly.

136136 TANKSPolyethylene Tanks/Tank Covers


B1545

INSULATED TANKThis heavy-duty, seamless, rotomoulded double-walled container features thick polyurethane insulation for temperature retention. Perfect for hauling fish, shipping seafood or as a holding tank. The containers are stackable up to three high when full of water and have an adjustable "Y" clip tie-down system that secures the lid (included). Smooth seamless interior walls are easy-to-clean and improve hygiene control. Molded polyethylene with a 2" threaded drain plug. USDA/FDA-approved. Sky blue color. Ships from factory, freight collect only.

HAULING TANK, ECONOMICALAeration for up to 2.5 pounds of fish is provided a 12V agitator (included). Holds 10 gallons when full. Can be shipped Ground. One-year warranty on agitator only.

APPROXIMATE CAPACITY DIMENSIONS SHIP WT MODEL (GAL) (L X W X H) (LBS) EACH

HT6 10 25" X 16" X 16" 10 $232.50

MODEL CAPACITYOUTSIDE

(L x W x H)INSIDE

(L x W x H)SHIP WT

(LBS) EACH

B1545 182 GAL/689 LTR 48” x 43” x 36” 45” x 40” x 28” 190 $1,073.38

Height with lid is 38”.

TANKSInsulated / Hauling

137

• Receive exclusive promotions and online shopping incentives• Learn about the industry with company articles • Bethefirsttoknowofnewproductannouncements• DiscoverthebenefitsofbeingaPentaircustomer&more

To recieve our e-mails please visit:PentairAES.com/signup

NEWS & OFFERS


STORAGE TANKSThese vertical, bulk storage tanks are ideal for mixing and storing make-up water, chemicals to be added, liquid waste, etc. Made of polyethylene, they offer excellent chemical resistance and can be used inside or outdoors. All tanks have a screw-on, sealed lid (manway). Tanks have a top-mounted manway. Tanks ship via motor freight only. Note: Lead time applies.

HEIGHT DIMENSIONS SHIP WT MODEL GALLONS DIAMETER A B MANWAY (LBS) EACH

900065 65 23" 39" 43" 8” 30 $196.81

900100 100 31" 32" 37" 8” 36 294.35

900165 165 31" 52" 57" 8” 52 371.06

900200 200 47" 26" 31" 16" 47 484.22

900350 325 47" 43" 50" 16" 77 692.33

900500 500 47" 78" 85" 16" 102 716.52

900850 850 56" 74" 82" 16” 152 1,130.57

A B

T25 T45 T55

GRADUATED TANKSGraduated containers are especially useful when mixing products. Semitranslucent, natural polyethylene allows the liquid level to be seen from outside the tanks (the resin used for these tanks meets FDA standards). They handle temperatures up to 140°F. The 25 and 45-gallon tanks are lightweight and nestable for tank storage and shipping. The 55-gallon tank comes with a 3/4" spigot valve already fitted and is not nestable. All tanks may be shipped Ground at dimensional rate. Covers are sold separately. WALL TANKS COVERS GALLONS DIAMETER HEIGHT THICKNESS MODEL EACH MODEL EACH

25 18” 28” 5/32” T25 $134.85 T25L $41.00

45 22” 32” 5/32” T45 158.40 T45L 66.83

55 21” 36” 5/32” T55 215.14 T55L 57.17

138138 TANKSStorage


STANDARD SEALED TANKS PRECUT SUMP TANKS WALL DIMENSIONS SHIP WT SHIP WT GALLONS THICKNESS L W H MODEL (LBS) EACH MODEL (LBS) EACH

20 3/16” 24" 16" 12" 102020 14 $136.27 S102020 14 $170.55

20 3/16” 16" 18" 16" 207020 13 136.27 — — —

28 3/16” 21" 18" 18" 103028 18 159.48 — — —

30 3/16” 30" 12" 20" 103030 20 173.81 S103030 17 208.63

30 3/16” 42" 10" 16" 207030 23 173.81 — — —

40 3/16” 27" 17" 20" 208040 22 241.62 S208040 19 285.02

45 3/16” 44" 16" 16" 207045 29 260.93 S207045 25 340.57

55 3/16” 32" 20" 20" 207055 29 354.89 S207055 25 381.80

55 3/16” 42" 15" 20" 209055 30 354.89 S209055 26 381.80

86* 3/16” 31" 24" 28" 300086 40 410.44 S300086 35 454.39

90* 3/16” 55" 18" 22" 207095 45 436.92 S207095 41 473.37

110* 3/16” 89" 14" 21" 103110 59 553.12 S103110 55 596.74

150* 3/16” 65" 29" 20" 103150 63 612.69 S103150 55 666.94

200* 3/16” 85" 20" 28" 103200 90 856.60 S103200 80 927.56

*Ship via motor freight, smaller sizes can ship Oversize.Note: Wall thickness and dimensions are approximate.

RECTANGULAR SEALED TANKS AND PRECUT SUMP TANKSSealed Tanks, made of molded polyethylene, have not been cut open or drilled and are completely sealed. Thsi allows for customization with the use of a drill, router or jigsaw. Make sumps, storage tanks, hauling tanks, filters, etc.

Precut Sump Tanks feature precut open tops with a center brace for support (in larger tanks only). We will drill holes for $12.50 each. Send us an exact drawing. Allow 30 days lead time.

STANDARD SEALED TANK PRECUT SUMP TANK

TANKSSealed/Sump

139


TANKS, TRANSLUCENTIdeal for raising brine shrimp, microalgae, phytoplankton, rotifers and more. Their semiclear, .04" polymer fiberglass construction allows 90% light transmission. Lightweight, corrosion proof tanks are also used for trickle filters and stripping towers. The conical bottom tanks are fitted with a 2" FNPT bottom hole and can be supported by bricks around the edge. All tanks are handmade; therefore, measurements are approximate and may vary. Ship from factory and have additional crating charges—lead time applies.

VOLUME DIAMETER SHIP WT MODEL (GAL/LITER) STYLE (APPROX.) HEIGHT (LBS) EACH

T4 23/87 FLAT BOTTOM 12" 4' 25 $153.84

T11 44/166 FLAT BOTTOM 18” 4’ 25 200.50

T185 66/250 FLAT BOTTOM 18" 5' 15 219.92

T1810 132/500 FLAT BOTTOM 18" 10' 19 290.55

T58 725/2,744 FLAT BOTTOM 58" 5' 52 806.58

T8 25/95 CONICAL BOTTOM 12" 41/2' 25 329.29

TC185 47/178 CONICAL BOTTOM 18" 5' 18 427.26

T9 23/87 BIOFILTER TANK 12" 4' 25 366.83

T4C — CAP 12" — 1 25.05

T18C — CAP 18" — 2 31.89

T58C — CAP 58" — 6 364.55

CONICAL BOTTOM TANKS, FREE-STANDINGTheir semiclear, .04" polymer fiberglass construction allows 90% light transmission—making them perfect for algal culture. An integrated, skirted stand supports the tank and requires no assembly. Conical base slopes from 45° to 30° at bottom. An access port is cut out for the 2" NPT elbow located at the bottom of the tank. Reinforced bottom and top edges prevent cracking and breakage. All tanks ship completely assembled and include 2" NPT bottom fittings. Ship motor freight directly from the manufacturer.

VOLUME SHIP WT PART # (GAL) DIAMETER HEIGHT (LBS) EACH

CBT25 25 12" 48" 37 $427.26

CBT68 68 18" 60" 78 512.65

CBT129 129 24” 60” 83 854.43

Flat Bottom

Biofilter Tank

Conical Bottom

140140 TANKSTranslucent


Documents

TANKS PRODUCTS - Pentair Aquatic Eco-Systems · These tanks have a flat depression molded into the side near the bottom for a bulkhead fitting. Models ending in -W2 have a 2’x2’