Upload
omar-gonzalez
View
123
Download
6
Embed Size (px)
Citation preview
A Guide to Excellence
Presented by Westen Nygren
TAMS INDUSTRIES
• API Q1 and 4F certified• Submitting for API 11E later this year• AWS (American Welding Society)• Welding in compliance with AWS D1.1 and ASME Section IX
Quality Standards
• Facility Size: 66,750 sq. ft. (6201 sq. meters)• Manufacturing Shop: 150’ width x 325’ long x 40’ height• Material Processing: 60’ width x 200’ long x 20’ height
FACILITY
TAMS Industries specializes in the following:• Heavy metal fabrication• Large quantity machine orders• In-house turnkey solutions• OEM/ Contract manufacturing• Cost saving state-of-the-art equipment• Quality standards and process controls• Customized jobs and emergencies
Basically…. If you have a drawing and it is made out of steel…..
WE CAN BUILD IT
SPECIALTIES
• (5) 15 ton overhead cranes• 1 and 2 ton jib cranes• 55k Capacity yard crane• (2) Doosan Puma 400 LM• Bridgeport• Doosan Puma 300• Hyundai WIA L 800LMA• Wintech DMV-3000• Summit• TMG RE-1MV• Dynapath• (7) Various Forklifts• (2) Trucks
• Press Brakes • (2) Burn Tables• Pipe profiler• Python Beam Profiler• (2) Turning Rolls• (2) Saws• Shear• (32) Welding Machines• 10 ton electric crane• 10 ton electric overhead crane• 3 ton overhead bridge crane• (4) 30 ton overhead cranes
Equipment
PRESS BRAKE • Capabilities
• 0-1/2” thick-- 12’ wide• 5/8”-3/4”-- 8’ wide• 7/8”-1”– 2’ wide
• Can bend any length in the
above sizes
• Can bend mild steel,
aluminum and stainless
HD PLASMA BURN TABLE• 10’ x 40’ table
• 400 Amp, 260 Amp, 130 Amp,
80 Amp and 50 Amp capabilities.
• Capable of cutting Mild Steel,
Aluminum, and Stainless plate at
a high rate of speed with a
tolerance of + or – 1/16”
• 2 Oxy fuel torches, capable of
cutting multiple parts at once,
up to 6” thick material
PLASMA BURN TABLE• 8’ x 20’
• 2 Plasma cutting torches with
260Amp and 100Amp capabilities
• Gauge plate to 2” thick plate with
a + or – 1/16” tolerance
• 8’ x 20’ downdraft table, able to
fit one full sheet or multiple small
sheets for cutting multiple jobs or
thicknesses for cutting down
handling time
CNC PIPE PROFILER• 6 Axis Robotic cutting machine
• Capable of cutting ¾” to 24” pipe
with wall thicknesses up to 1” and
material up to 21’ long
• 100Amp Plasma torch for tighter
tolerances and speed
• Oxy fuel for thicker material
• Capable of cutting multiple
angles, connection points, and
holes for whatever the customer
specifications
PYTHON BEAM PROFILER• 6 Axis Robotic cutting system
• 400Amp, 260Amp, and 130Amp High
Def. Plasma
• Cuts up to 2” thick material on
pierce and 3” on edge start
• Processes beam, channel, angle and
HSS Tubing
• Can handle 2-1/2” to 42” wide x 60’
long pieces
• In-feed conveyors are 72’ long
• Out-feed conveyors are 60’ long
TURNING ROLL 1• 3 roller system with
adjustable support table for
larger material
• Retractable die for removal
of plate rolled in cylinders
• Capable of rolling Gauge
plate up to 1” thick material
almost any length
• Can handle 12’ wide plate,
with a diameter of 12” and
larger.
SAW 1• Capable of cutting pipe,
angle, channel, beam,
round and square bar,
square or rectangle tubing
• Can handle up to 18-3/4”
height or diameter x 42”
wide and up to 60’ long
• All types of material and
grades can be processed
through this machine.
SAW 2• Capable of cutting pipe,
angle, channel, beam,
round and square bar,
square or rectangle tubing
• Can cut up to 16” height
and 16” width x 20’ long
SHEAR• Capable of cutting any
length x 12’ width
• Material from Gauge up to
3/8” thick
• Equipped with a backstop
for cutting numerous
quantities while only setting
the length up once for
quicker and more efficient
cutting times.
WELDING MACHINES• 32 total welding machines
• CNC and Manual
• Weld Carbon Steel,
Stainless Steel and
Aluminum
• Utilize Carbon arc/ Gouging,
Flux cored arc (FCAW), Gas
metal arc MIG (GMAW), Gas
tungsten arc TIG (GTAW)
Description (unit): L800LMASwing over the bed: 41.3" (1,050mm)Maximum turning length: 128"(3,250)Chuck Main Spindle (in): 30 optBar capacity in(mm): 9.45 (240)Spindle Bore in(mm): 12.6" (320)X-axis travel in(mm): 19.7 (500)Z-axis travel in(mm): 129.1 (3280)X - rapid traverse ipm(m/min): 472.4 (12)Z - rapid traverse ipm(m/min): 472.4 (12)Spindle Power hp (kW): 60/50 (45/37)Maximum spindle speed: 700
Hyundai WIA L 800LMA
DOOSAN PUMA 400 LM• CNC Lathe
• Max Turning Diameter:
21.70”
• Max Turning Length: 83.8”
• Number of Tool Stations: 12
• Turret OD Tool Size: 1.3” x
1.3”
• Boring Bar Diameter: 2.4”
DOOSAN PUMA 300• CNC Lathe
• Max Turning Diameter:
13.9”
• Bar Working Diameter: 4”
• Number of Tools Mounted:
12
BRIDGEPORT GX 1600• Vertical CNC, 3 axis
• Table Size (LxW): 63.93” x 27.55”
• Max Work piece Weight: 3,300 lbs.
• Taper: #50 with BIG PLUS interface
• Top RPM: 10,000 Opt. 12,000
• Horse Power (30 min. rating): 25
• Primary Tool Carrier: ATC Swing Arm
• Number of Tools: 30 Opt. 40
• Max Tool Length: 13.70”
• Max Tool Weight: 17.60#
WINTECH DMV-3000• Vertical Milling CNC, 3 axis
• Table Size: 49.21” x 118.11”
• Floor Dimensions: 152” x 319”
• Longitudinal (X-axis): 126”
• Cross (Y-axis): 55.12”
• Vertical (Z-axis): 20.07”
• Spindle speed: 3000 RPM
• ATC, Number of tools: 60
• Table Load Capacity: 11,025 lbs.
SUMMIT• Piece capability size: 75” x
60”
• 360 degree table index
TMG RE-1MV• Vertical machining center
• Travel: 27” x 63” x 25”
HYDRO TESTING• Lorimer Hydrostatic Testing
Equipment
• Test up to 25,000 PSI
• Max length testing ability:
20’
• Can test up to 5 tools at
once
• 1” thick plate on sides for
blowout prevention
CRANE• 10 Ton Electric Overhead
Crane
• 3 Ton Overhead Bridge
Crane
• 30 Ton Overhead Crane
• 20 Ton Crane
• 15 Ton Overhead Crane
• 1 & 2 Ton Jib Cranes
55K CAPACITY YARD CRANE
INVENTORY ON HANDWe stock plate from ¼” to 3” in A572-50 and A514-T1Stock has traceability (heat number, thickness, etc..)
COATING ON LOCATION• Turner Coatings, LLC.
• Offers:• Epoxy Coatings• Urethane Coatings• Zinc Primers• Thermal-cured (xylan, ceramic-metallic, moly)• Tank Linings• Wear resistant coatings• Powder coatings• Abrasive blasting• Cosmetic blasting (stainless, aluminum,
copper)• Automotive quality painting (Fleet trucks,
trailers)
• Blast room: 25’ x 25’ x 80’
• Powder Coating booth: 15’ x 35’
• Powder Coating oven: 15’ x 35’
FRONT OF FACILITY BACK OF FACILITY
PICTURES OF FACILITY
BAY 2 BAY 3
PICTURES OF FACILITY
YARD SPACE
FORKLIFTS• 5000 LB
• 8000 LB
• 9000 LB
• 15000 LB
• 21000 LB
• 36000 LB
• 40000 LB
Transportation• 3 trucks
• 1999 Ford F-350• 2004 Chevy C5500• 2000 Volvo VNM
• Pick up material if needed
• Delivery to customer if
needed
• Trucks are constantly
running
CUSTOMERS• Baker Hughes
• Lee C Moore
• IOS
• Cameron
• Canrig Drilling
• DTI
• Fluid Systems
• Forge Systems
• GE Oil & Gas
• Huisman North American Services
• Hydratron• LB Pipe and Coupling• Oceaneering• Ocean Works• Patterson Drilling• RTI Energy Systems• SEC• Techniek• Trendsetter• Versabar• Weatherford