tables - DeskMakers Pricebook_1-29-20.pdf2020/01/29 · meeting and conference tables round square rectangular racetrack boatshape bow-end sightline top shapes: round, square, rectangular,

tables

meeting cafe training occasional

PRICE & SPECIFICATION GUIDE

Version: 9.18.19

storage

3deskmakers.com2 deskmakers.com

meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of

contents tables

Finishes 4-6Pulls 7Meeting tables 8-121Cafe tables 122-139Training tables 140-167Occasional tables 168-187Storage 188--193Terms and Conditions 194Warranty 195

table of contentsrevisions

6/26/19 Price adjustments and corrections7/2/19 Price corrections 7/18/19 Price corrections7/31/19 Corrected Model Numbers8/8/19 Corrected Torrey colors9/18/19 Discontinued Fletcher and Redondo bases12/10/19 Updated Beacon and Mission bases

https://deskmakers.com/



mee�ng cafe training occasionaltables table of contents mee�ng cafe training occasionaltable of

contents tables

standard thermofuse laminate (TFL)

HPL Match:Arborite Black AAS405CAP

laminate finishes

Black Dove Grey

HPL Match:Wilsonart Dove Grey D92-60

HPL Match:Formica Storm 912-58

HPL Match:Wilsonart Designer White D354-60

Slate Grey Glacier White Regal White

HPL Match:Arborite Elegant White AAS550-CA

HPL Match:

*Not an exact match

Black Forest Walnut *

HPL Match:Arborite Auburn Cherry Modern W466-BV*Not an exact match

California Walnut* Cognac Dri�wood*

Fawn Cypress Hardrock Maple Iconic Maple Mahogany Spice Walnut

Tenino Grey Tuscan Walnut Yorkshire Cherry Gunmetal Grey Oil Cherry

HPL Match:Coming Soon

HPL Match:Pionite Sunset HP336N

HPL Match:Coming Soon

HPL Match:Wilsonart Fawn Cypress 8208-60

HPL Match:Formica Hardrock Maple 86992-58

HPL Match:Nevamar Iconic Maple WM0047-T*Not an exact match

HPL Match:Wilsonart Empire Mahogany7122T-60

HPL Match:Pionite Spice Walnut WW561-N

HPL Match:Limited Availability

HPL Match:Arborite Chocolate Pear Tree AAW-444-FPP

HPL Match:Pionite Yorkshire Cherry WC411-N

HPL Match:Nevamar Gunmetal S620T

HPL Match:Pionite Oiled Cherry WC421-S

For HPL matches with limited availability, please call customer service. *Not available in one piece tops over 96" long.

premium textured thermofuse laminate (TFL)

Pricing shown in this price list applies only to non-premium HPL’s as follows:

A minimum charge of $150 net per HPL color will be applied to each order.

Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar.

Premium textured TFLs require a 10% upcharge. Add item code OP-TTFL-1.

For HPL matches with limited availability, please call customer service. *Not available in one piece tops over 96" long.

high pressure laminate (HPL)


Intrigue* Iron Hemlock

HPL Match:Pionite Looks Likatre W163-OZ


HPL Match:Formica Natural Ash 8843-WR

Natural Ash* *

HPL Match:Not Available


Silverwood* Urban Walnut*

HPL Match:Not Available

HPL Match:Pionite WX421-LZ



contents tables

Most DeskMakers product is made of Thermofuse laminate (TFL). As such, there is an upcharge for ordering product in high pressure laminate (HPL). This upcharge varies based on the product and the size of the HPL order.

Please note that only the portion of the order in HPL will be calculated to determine the level of HPL upcharges.

Product Category Option Code

TABLE BASESPanel, Rectangular and SquareEntire base HPL (expect kickplate)

50%OP-HPL1-30-?? 40% 30%

UP TO $10,000 LISTBefore HPL upcharges

$10,001 TO $50,000 LISTBefore HPL upcharges

OVER $50,000 LISTBefore HPL upcharges

(1A) (2A) (3A)

laminate finishes

Pricing shown in this price list applies only to non-premium HPL’s as follows: • Wilsonart: Solids, Woodgrains, and Abstracts in Matte (-60) finish, • Formica: Color Portfolio, Woodgrains, and Patterns in Matte (-58) finish • Pionite: Solids, Woodgrains, and Abstracts in Suede (N) finish

A minimum charge of $150 net per HPL color will be applied to each order.

Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar.

Additional lead times required for HPL orders depending on material availability and order complexity.

high pressure laminate (HPL) pricing chart

high pressure laminate (HPL)

HPL is only available with DeskMakers standard 2MM edgebanding.

Pulls are included on all drawers and cabinet doors for no upcharge.

standard pulls

premium pulls

101BL 101SN 105SN

108SN 115SN

125SN

201BL

201SN

152SN 154SN 158SN

302SN 304SN

115BL

125BL

Premium pulls are available for an upcharge of $24 per pull.

pulls



9deskmakers.com

meeting cafe training occasionaltable of contents tables

Meeting Table Tops 10-39Malibu 40-51Laguna 52-63Torrance 64-67Imperial 68-70Komo 71-79Hermosa 80-81Surfside 82-87Sunset 88-91Beacon 92-95Mission 96-99Newport 100-101Cabrillo 102-103Venice 104-117Torrey 118-121

Cafe meetingtable of contents


1110 deskmakers.comdeskmakers.com


contents tables

meeting table tops

meeting and conference tables

round square rectangular racetrack

boatshape bow-end sightline

top shapes: round, square, rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table dimensions: depths: 36", 42" and 48"lengths: 72", 84", 96" and 120"

top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 120", 144", 168", 192", 216" and 240"

top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 216" and 240"

top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 120", 144", 168", 192", 216" and 240"

one piece tops

two piece tops

three piece tops

multifinish tops

finishes

1-1/8" & 1-7/8" thick thermally fused laminate (TFL) with multiple edge options1-1/8" & 1-7/8" thick high pressure laminate (HPL) with multiple edge options1-1/8" & 1-7/8" thick plain sawn veneer, quarter sawn and planked random match veneer with multiple edge options1" thick HPL with exposed plywood core1-1/8" thick HPL with MDF core and PVC knife edge1-1/8" thick thermofoil three dimensional laminate (3DL) (select sizes) 1-1/2" thick butcher block (select sizes and shapes)1-1/8" thick planked wood (select sizes and shapes)





contents tables

edges

A11-1/8" thick top2mm PVC edge

group a

B11-1/8" thick top3/8" solid wood edge

group b

B2

1-1/8" thick top1-1/8" solid wood edge

group c

1-1/8" thick top2" solid wood edge

group d

F1

1-7/8" thick top3/8" solid wood edge

group f

1-1/8" thick top3DL ergo edge

group j

1-1/8" thick MDF top2mm PVC Knife edge

group k

E1

1-7/8" thick top2mm PVC edge

group e

1-1/8" & 1-1/2" thick solid wood topsolid wood square edge

group l

1-1/8" thick top2mm wood edge

group m


group n

B3

C1

C2

C4

D1

D2

J1

K1

L1

M1

N1

1" thick topexposed plywood edge

group p

P1

user edges both with and without solid wood edges

A visible frame will be visible on the surface of the table top when solid wood edges are specified. Color will be matched to table top finish, however slight differences in shade and grain may be evident.

Solid wood edges are not available in white, black or solid grey.

seams of multiple piece table tops

Seams of multiple piece table tops will have mulitple pieces of wood edges. Color and grain variation can occur from piece to piece.

Grain of table top will not line up at the seams

corner detail

seam detail

Shading indicates user edges.





contents tables

AC-DPGR-71- (2) power outlets- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) RJ-45 keystone knockouts (jacks not included)- (2) Cord Pass Thoughs- 144" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum

AC-DPGR-72

- (2) power outlets- (2) 2.1A USB charging ports- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) RJ-45 keystone knock outs (jacks not included)- (2) Cord Pass Thoughs- 144" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum

AC-DPGR-73*- (6) power outlets- (2) cutouts for interface plate (not included)- (2) 108" long 15amp plug cords- Finishes: Black, Silver and Brushed Aluminum

AC-DPGR-74*- (6) power outlets- (2) 2.1A USB charging ports- (1) cutout for interface plate (not included)- (2) 108" long 15amp plug cords- Finishes: Black, Silver and Brushed Aluminum

AC-DPGR-77**- (3) power outlets- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) 2.1A USB charging ports- (2) RJ-45 keystone knock outs (jacks not included)- 108" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum

*CANNOT be placed inside 18” cylinder bases

*CANNOT be placed inside 18” cylinder bases

**CANNOT be placed inside 18” cylinder/rectangular bases

Please see the electrical pricebook for additional information and pricing

power grommetsPower grommet and location applicability depends on the table size and the base specified. See the Conference Table Grommet Guide for information.





contents tables

CF-CTRD-3030-??-?? 30 30 $593 $1,064 $1,309 NA $714 NA $685 $750

CF-CTRD-3636-??-?? 36 36 $602 $1,064 $1,400 $1,463 $732 $1,198 $855 $914

CF-CTRD-4242-??-?? 42 42 $755 $1,220 $1,557 $1,650 $907 $1,373 $885 $932

CF-CTRD-4848-??-?? 48 48 $916 $1,445 $1,752 $1,955 $1,126 $1,660 $1,018 $1,054

CF-CTRD-5454-??-?? 54 54 $1,091 $1,675 $2,187 $2,271 $1,294 $1,853 $1,265 $1,346

CF-CTRD-6060-??-?? 60 60 $1,147 $1,777 $2,345 $2,439 $1,363 $1,950 $1,295 $1,363

CF-CTRD-3030-??-?? 30 30 $509 NA NA NA NA

CF-CTRD-3636-??-?? 36 36 $694 NA NA NA NA

CF-CTRD-4242-??-?? 42 42 $913 NA NA NA NA

CF-CTRD-4848-??-?? 48 48 NA NA NA NA NA



CF-CTRD-3030-??-?? 30 30 $395 $709 $873 NA $476 NA

CF-CTRD-3636-??-?? 36 36 $401 $709 $933 $976 $488 $799

CF-CTRD-4242-??-?? 42 42 $503 $813 $1,038 $1,100 $604 $915

CF-CTRD-4848-??-?? 48 48 $610 $963 $1,168 $1,303 $751 $1,107

CF-CTRD-5454-??-?? 54 54 $727 $1,117 $1,458 $1,514 $862 $1,236

CF-CTRD-6060-??-?? 60 60 $764 $1,185 $1,563 $1,626 $909 $1,300

Model Number Depth Length

round table top TFL edge options

2mm PVC

T1-A1

1-1/8" ThickStandard TFL

B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

round table top veneer edge options - subject to minimum order requirements, see below.

A1


round table top HPL edge options

H1-A12mm PVC Knife Plywood

1-1/8" ThickStandard HPL

1-1/8" ThickMDF Core

1" ThickPlywood Core






H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1 Model Number Depth Length

round table top 3DL and solid wood options - subject to minimum order requirements, see below.

BL-L1 BB-L1 PL-L1 PW-L1

1-1/8" ThickThermofoil

Ergo

3D-J1

1-1/2" ThickMaple & Oak

Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square

- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.

- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- Please see the Materials Specification Guide for specifications and finishes.

- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.

TFL

HPL 3DL Butcher Block Planked Wood

- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

CF-CTRD-3030-??-?? 30 30 $628 $957 $1,353 $1,515 $729 $1,003

CF-CTRD-3636-??-?? 36 36 $1,015 $1,410 $1,884 $2,110 $1,177 $1,464

CF-CTRD-4242-??-?? 42 42 $1,110 $1,569 $2,125 $2,380 $1,288 $1,634

CF-CTRD-4848-??-?? 48 48 $1,218 $1,744 $2,377 $2,662 $1,412 $1,817

CF-CTRD-5454-??-?? 54 54 $2,478 $3,069 $3,782 $4,236 $2,875 $3,152

CF-CTRD-6060-??-?? 60 60 $2,614 $3,271 $4,063 $4,551 $3,032 $3,362

Depth Length2mm Wood

V1-M1

1-1/8" ThickPlain Sawn

B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number

M1 L1 L1 L1 L1





contents tables

CF-CTSQ-3030-??-?? 30 30 $521 $854 $1,092 $1,242 $651 $1,060 $567 $645

CF-CTSQ-3636-??-?? 36 36 $542 $976 $1,126 $1,279 $673 $1,094 $696 $855

CF-CTSQ-4242-??-?? 42 42 $695 $1,063 $1,281 $1,435 $844 $1,272 $712 $968

CF-CTSQ-4848-??-?? 48 48 $857 $1,260 $1,507 $1,660 $1,067 $1,579 $936 $1,071

CF-CTSQ-5454-??-?? 54 54 $1,019 $1,551 $1,618 $1,806 $1,181 $1,880 $1,226 $1,265

CF-CTSQ-3030-??-?? 30 30 $575 $1,004 $1,474 $1,340 $2,114

CF-CTSQ-3636-??-?? 36 36 $694 $1,194 $1,871 $1,611 $2,325

CF-CTSQ-4242-??-?? 42 42 $913 $1,420 $2,341 $2,030 $2,930

CF-CTSQ-4848-??-?? 48 48 NA $1,679 $2,883 $2,557 $3,692

CF-CTSQ-5454-??-?? 54 54 NA $2,448 $3,973 $3,223 $4,652

CF-CTSQ-3030-??-?? 30 30 $347 $569 $728 $828 $434 $706

CF-CTSQ-3636-??-?? 36 36 $361 $650 $751 $853 $448 $729

CF-CTSQ-4242-??-?? 42 42 $463 $708 $854 $957 $563 $848

CF-CTSQ-4848-??-?? 48 48 $571 $840 $1,005 $1,107 $711 $1,052

CF-CTSQ-5454-??-?? 54 54 $679 $1,034 $1,078 $1,204 $787 $1,253


2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

Model Number Depth Length H1-A1

2mm PVC Knife Plywood









H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1 Model Number Depth Length BL-L1 BB-L1 PL-L1 PW-L1


Ergo

3D-J1


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square

TFL

HPL 3DL Butcher Block Planked Wood

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

CF-CTSQ-3030-??-?? 30 30 $619 $910 $953 $1,048 $718 $956

CF-CTSQ-3636-??-?? 36 36 $1,005 $1,353 $1,404 $1,544 $1,166 $1,408

CF-CTSQ-4242-??-?? 42 42 $1,097 $1,504 $1,564 $1,720 $1,273 $1,568

CF-CTSQ-4848-??-?? 48 48 $1,204 $1,669 $1,737 $1,910 $1,397 $1,742

CF-CTSQ-5454-??-?? 54 54 $2,463 $2,986 $3,062 $3,368 $2,857 $3,068


V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number

M1 L1 L1 L1 L1

square table top TFL edge options

square table top veneer edge options - subject to minimum order requirements, see below.

square table top HPL edge options

square table top 3DL and solid wood options - subject to minimum order requirements, see below.

- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.

- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- Please see the Materials Specification Guide for specifications and finishes.

- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.






contents tables

CF-REC3-4816-??-?? 48 216 $2,449 $3,584 $4,031 $4,437 $2,835 $3,873

CF-REC3-4840-??-?? 48 240 $2,800 $4,099 $4,618 $5,085 $3,241 $4,437

CF-REC3-5416-??-?? 54 216 $2,707 $3,966 $4,466 $4,917 $3,136 $4,290

CF-REC3-5440-??-?? 54 240 $3,097 $4,540 $5,117 $5,636 $3,587 $4,915

CF-REC3-6016-??-?? 60 216 $2,966 $4,347 $4,900 $5,398 $3,436 $4,706

CF-REC3-6040-??-?? 60 240 $3,395 $4,981 $5,617 $6,188 $3,932 $5,392

CF-REC2-4820-??-?? 48 120 $1,205 $1,952 $2,023 $2,079 $1,398 $1,970

CF-REC2-4844-??-?? 48 144 $1,406 $2,087 $2,360 $2,605 $1,638 $2,265

CF-REC2-4868-??-?? 48 168 $1,684 $2,502 $2,830 $3,122 $1,964 $2,712

CF-REC2-4892-??-?? 48 192 $1,973 $2,928 $3,309 $3,655 $2,295 $3,174

CF-REC2-4816-??-?? 48 216 $2,371 $3,521 $3,980 $4,395 $2,761 $3,818

CF-REC2-4840-??-?? 48 240 $2,719 $4,034 $4,559 $5,034 $3,163 $4,375

CF-REC2-5444-??-?? 54 144 $1,574 $2,338 $2,645 $2,918 $1,835 $2,537

CF-REC2-5468-??-?? 54 168 $1,843 $2,735 $3,093 $3,414 $2,144 $2,967

CF-REC2-5492-??-?? 54 192 $2,157 $3,201 $3,619 $3,996 $2,511 $3,473

CF-REC2-5416-??-?? 54 216 $2,586 $3,841 $4,343 $4,793 $3,012 $4,166

CF-REC2-5440-??-?? 54 240 $2,976 $4,416 $4,994 $5,514 $3,463 $4,791

CF-REC2-6044-??-?? 60 144 $1,733 $2,572 $2,909 $3,210 $2,017 $2,790

CF-REC2-6068-??-?? 60 168 $2,027 $3,009 $3,403 $3,755 $2,360 $3,266

CF-REC2-6092-??-?? 60 192 $2,372 $3,520 $3,981 $4,395 $2,761 $3,821

CF-REC2-6016-??-?? 60 216 $2,845 $4,223 $4,778 $5,273 $3,314 $4,584

CF-REC2-6040-??-?? 60 240 $3,273 $4,859 $5,493 $6,064 $3,811 $5,271

CF-REC1-3672-??-?? 36 72 $553 $1,034 $1,078 $1,112 $642 $1,051

CF-REC1-4284-??-?? 42 84 $571 $1,120 $1,173 $1,302 $662 $1,134

CF-REC1-4884-??-?? 48 84 $580 $1,149 $1,205 $1,369 $714 $1,193

CF-REC1-4296-??-?? 42 96 $634 $1,178 $1,363 $1,529 $751 $1,275

CF-REC1-4896-??-?? 48 96 $701 $1,241 $1,430 $1,594 $837 $1,362

CF-REC1-4820-??-?? 48 120 $963 $1,637 $1,855 $2,018 $1,104 $1,676

Model Number Depth Lengthone piece top

two piece top

three piece top

CF-REC2-4820-??-?? 48 120 $1,929 $2,929 $3,035 $3,119 $2,097 $2,955 $2,059 $2,471

CF-REC2-4844-??-?? 48 144 $2,109 $3,131 $3,540 $3,908 $2,458 $3,398 $2,327 $3,091

CF-REC2-4868-??-?? 48 168 $2,526 $3,753 $4,245 $4,683 $2,945 $4,068 $2,569 $3,145

CF-REC2-4892-??-?? 48 192 $2,960 $4,392 $4,964 $5,482 $3,443 $4,761 $2,601 $3,205

CF-REC2-4816-??-?? 48 216 $3,557 $5,282 $5,971 $6,593 $4,142 $5,727 $3,115 $4,547

CF-REC2-4840-??-?? 48 240 $4,078 $6,052 $6,839 $7,550 $4,744 $6,563 $3,148 $4,607

CF-REC2-5444-??-?? 54 144 $2,361 $3,507 $3,968 $4,377 $2,752 $3,805 $3,164 $3,796

CF-REC2-5468-??-?? 54 168 $2,764 $4,103 $4,639 $5,122 $3,217 $4,451 $3,704 $4,445

CF-REC2-5492-??-?? 54 192 $3,235 $4,802 $5,429 $5,994 $3,766 $5,209 $4,335 $5,202

CF-REC2-5416-??-?? 54 216 $3,880 $5,762 $6,515 $7,191 $4,518 $6,249 $5,198 $6,238

CF-REC2-5440-??-?? 54 240 $4,465 $6,624 $7,491 $8,271 $5,195 $7,187 $5,983 $7,179

CF-REC2-6044-??-?? 60 144 $2,599 $3,858 $4,364 $4,816 $3,025 $4,186 $3,483 $4,180

CF-REC2-6068-??-?? 60 168 $3,041 $4,514 $5,104 $5,634 $3,540 $4,898 $4,074 $4,889

CF-REC2-6092-??-?? 60 192 $3,559 $5,281 $5,972 $6,593 $4,142 $5,731 $4,767 $5,721

CF-REC2-6016-??-?? 60 216 $4,268 $6,336 $7,167 $7,909 $4,972 $6,876 $5,720 $6,864

CF-REC2-6040-??-?? 60 240 $4,910 $7,288 $8,240 $9,097 $5,716 $7,906 $6,579 $7,895

CF-REC3-4816-??-?? 48 216 $3,674 $5,376 $6,047 $6,655 $4,253 $5,809 $3,795 $4,592

CF-REC3-4840-??-?? 48 240 $4,200 $6,148 $6,926 $7,627 $4,861 $6,655 $3,827 $4,652

CF-REC3-5416-??-?? 54 216 $4,061 $5,949 $6,699 $7,376 $4,704 $6,436 $5,441 $6,530

CF-REC3-5440-??-?? 54 240 $4,646 $6,810 $7,675 $8,454 $5,381 $7,373 $6,224 $7,469

CF-REC3-6016-??-?? 60 216 $4,449 $6,521 $7,351 $8,096 $5,154 $7,060 $5,961 $7,153

CF-REC3-6040-??-?? 60 240 $5,092 $7,471 $8,426 $9,282 $5,899 $8,089 $6,822 $8,187

CF-REC1-3672-??-?? 36 72 $915 $1,551 $1,618 $1,668 $963 $1,578 $1,226 $1,472

CF-REC1-4284-??-?? 42 84 $922 $1,681 $1,760 $1,953 $994 $1,700 $1,250 $1,501

CF-REC1-4884-??-?? 48 84 $940 $1,724 $1,809 $2,053 $1,072 $1,790 $1,258 $1,575

CF-REC1-4296-??-?? 42 96 $952 $1,768 $2,046 $2,293 $1,126 $1,913 $1,267 $1,519

CF-REC1-4896-??-?? 48 96 $1,051 $1,862 $2,146 $2,392 $1,256 $2,044 $1,409 $1,690

CF-REC1-4820-??-?? 48 120 $1,445 $2,455 $2,783 $3,026 $1,657 $2,515 $1,934 $2,322


two piece top

three piece top

- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.

- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.

2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL










H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1

HPL

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

rectangular table top TFL edge options

rectangular table top HPL edge options





contents tables

CF-REC1-3672-??-?? 36 72 $1,869 $2,392 $2,468 $2,715 $2,168 $2,474

CF-REC1-4284-??-?? 42 84 $2,053 $2,662 $2,752 $3,027 $2,382 $2,759

CF-REC1-4884-??-?? 48 84 $2,150 $2,785 $2,869 $3,078 $2,494 $2,898

CF-REC1-4296-??-?? 42 96 $2,153 $2,820 $2,918 $3,210 $2,497 $2,927

CF-REC1-4896-??-?? 48 96 $2,263 $2,960 $3,062 $3,369 $2,626 $3,070

CF-REC1-4820-??-?? 48 120 NA NA NA NA NA NA

CF-RECM-4820-?? 48 120 $2,065 $2,828 $2,898 $2,955 $2,258 $2,845

CF-RECM-4844-?? 48 144 $2,266 $2,964 $3,236 $3,482 $2,467 $3,141

CF-RECM-4868-?? 48 168 $2,544 $3,378 $3,706 $3,998 $2,824 $3,588

CF-RECM-4892-?? 48 192 $2,833 $3,803 $4,185 $4,530 $3,155 $4,050

CF-RECM-4816-?? 48 216 $3,231 $4,397 $4,856 $5,271 $3,621 $4,694

CF-RECM-4840-?? 48 240 $3,579 $4,910 $5,435 $5,909 $4,023 $5,251

CF-RECM-5444-?? 54 144 $2,434 $3,215 $3,520 $3,794 $2,659 $3,412

CF-RECM-5468-?? 54 168 $2,703 $3,612 $3,970 $4,291 $2,965 $3,843

CF-RECM-5492-?? 54 192 $3,017 $4,078 $4,495 $4,871 $3,324 $4,349

CF-RECM-5416-?? 54 216 $3,446 $4,716 $5,219 $5,670 $3,817 $5,042

CF-RECM-5440-?? 54 240 $3,837 $5,293 $5,870 $6,390 $4,260 $5,668

CF-RECM-6044-?? 60 144 $2,593 $3,449 $3,785 $4,086 $2,839 $3,667

CF-RECM-6068-?? 60 168 $2,887 $3,885 $4,279 $4,631 $3,175 $4,141

CF-RECM-6092-?? 60 192 $3,232 $4,397 $4,858 $5,271 $3,570 $4,698

CF-RECM-6016-?? 60 216 $3,706 $5,100 $5,653 $6,148 $4,112 $5,460

CF-RECM-6040-?? 60 240 $4,133 $5,735 $6,370 $6,941 $4,600 $6,146

CF-REC3-4816-??-?? 48 216 $6,147 $7,418 $7,586 $8,005 $7,131 $7,644

CF-REC3-4840-??-?? 48 240 $6,374 $7,762 $7,944 $8,401 $7,394 $8,007

CF-REC3-5416-??-?? 54 216 $7,991 $9,298 $9,489 $10,437 $9,270 $9,504

CF-REC3-5440-??-?? 54 240 $8,245 $9,668 $9,876 $10,863 $9,564 $9,892

CF-REC3-6016-??-?? 60 216 $8,236 $9,571 $9,767 $10,743 $9,553 $9,782

CF-REC3-6040-??-?? 60 240 $8,517 $9,968 $10,181 $11,199 $9,879 $10,197

CF-REC2-4820-??-?? 48 120 $3,882 $4,696 $4,814 $5,296 $4,503 $4,824

CF-REC2-4844-??-?? 48 144 $4,109 $5,039 $5,174 $5,692 $4,767 $5,185

CF-REC2-4868-??-?? 48 168 $4,337 $5,377 $5,513 $5,856 $5,030 $5,561

CF-REC2-4892-??-?? 48 192 $4,564 $5,719 $5,871 $6,252 $5,294 $5,924



CF-REC2-5444-??-?? 54 144 $5,339 $6,298 $6,438 $7,081 $6,194 $6,449

CF-REC2-5468-??-?? 54 168 $5,593 $6,667 $6,824 $7,508 $6,489 $6,837

CF-REC2-5492-??-?? 54 192 $5,847 $7,038 $7,211 $7,933 $6,783 $7,226



CF-REC2-6044-??-?? 60 144 $5,504 $6,491 $6,635 $7,299 $6,385 $6,647

CF-REC2-6068-??-?? 60 168 $5,784 $6,888 $7,049 $7,754 $6,710 $7,062

CF-REC2-6092-??-?? 60 192 $6,065 $7,285 $7,463 $8,209 $7,036 $7,477



rectangular table top veneer edge options - subject to minimum order requirements, see below.

multi-finish rectangular table topTFL edge options

- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.

- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.


V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number

Model Number Depth Lengththree piece top

2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL

one piece top

two piece top

three piece top





contents tables

CF-RTR3-4816-??-?? 48 216 $2,649 $3,781 $4,231 $4,643 $3,036 $4,077

CF-RTR3-4840-??-?? 48 240 $3,026 $4,333 $4,851 $5,321 $3,473 $4,669

CF-RTR3-5416-??-?? 54 216 $2,929 $4,189 $4,689 $5,144 $3,360 $4,516

CF-RTR3-5440-??-?? 54 240 $3,350 $4,801 $5,377 $5,897 $3,846 $5,174

CF-RTR3-6016-??-?? 60 216 $3,209 $4,597 $5,148 $5,646 $3,685 $4,955

CF-RTR3-6040-??-?? 60 240 $3,673 $5,268 $5,902 $6,473 $4,219 $5,680

CF-RTR2-4820-??-?? 48 120 $1,229 $2,083 $2,612 $2,778 $1,426 $2,101

CF-RTR2-4844-??-?? 48 144 $1,526 $2,404 $2,823 $3,068 $1,761 $2,388

CF-RTR2-4868-??-?? 48 168 $1,802 $2,607 $3,083 $3,359 $2,076 $2,815

CF-RTR2-4892-??-?? 48 192 $2,104 $3,050 $3,427 $3,767 $2,428 $3,296

CF-RTR2-4816-??-?? 48 216 $2,529 $3,658 $4,110 $4,521 $2,915 $3,954

CF-RTR2-4840-??-?? 48 240 $2,906 $4,210 $4,729 $5,196 $3,353 $4,546

CF-RTR2-5444-??-?? 54 144 $1,711 $2,476 $2,780 $3,057 $1,971 $2,674

CF-RTR2-5468-??-?? 54 168 $2,001 $2,896 $3,254 $3,577 $2,306 $3,129

CF-RTR2-5492-??-?? 54 192 $2,340 $3,388 $3,807 $4,185 $2,699 $3,661

CF-RTR2-5416-??-?? 54 216 $2,809 $4,065 $4,568 $5,022 $3,239 $4,393

CF-RTR2-5440-??-?? 54 240 $3,229 $4,677 $5,254 $5,774 $3,724 $5,052

CF-RTR2-6044-??-?? 60 144 $1,880 $2,723 $3,060 $3,361 $2,167 $2,941

CF-RTR2-6068-??-?? 60 168 $2,200 $3,186 $3,579 $3,932 $2,537 $3,442

CF-RTR2-6092-??-?? 60 192 $2,575 $3,727 $4,188 $4,602 $2,969 $4,027

CF-RTR2-6016-??-?? 60 216 $3,089 $4,473 $5,025 $5,522 $3,562 $4,833

CF-RTR2-6040-??-?? 60 240 $3,553 $5,144 $5,780 $6,351 $4,094 $5,559

CF-RTR1-3672-??-?? 36 72 $575 $1,117 $1,458 $1,553 $688 $1,187

CF-RTR1-4284-??-?? 42 84 $617 $1,218 $1,615 $1,638 $716 $1,242

CF-RTR1-4884-??-?? 48 84 $680 $1,252 $1,659 $1,668 $804 $1,329

CF-RTR1-4296-??-?? 42 96 $737 $1,309 $1,720 $1,884 $838 $1,412

CF-RTR1-4896-??-?? 48 96 $802 $1,376 $1,773 $1,935 $926 $1,500

CF-RTR1-4820-??-?? 48 120 $1,063 $1,772 $2,109 $2,273 $1,206 $1,813


two piece top

three piece top

CF-RTR2-4820-??-?? 48 120 $1,953 $3,125 $3,919 $4,167 $2,139 $3,151 $2,259 $2,710

CF-RTR2-4844-??-?? 48 144 $2,289 $3,326 $4,234 $4,602 $2,642 $3,582 $2,468 $3,081

CF-RTR2-4868-??-?? 48 168 $2,704 $3,911 $4,624 $5,039 $3,114 $4,223 $2,599 $3,145

CF-RTR2-4892-??-?? 48 192 $3,156 $4,576 $5,141 $5,650 $3,643 $4,944 $2,635 $3,205

CF-RTR2-4816-??-?? 48 216 $3,794 $5,487 $6,165 $6,782 $4,373 $5,931 $3,152 $4,547

CF-RTR2-4840-??-?? 48 240 $4,359 $6,315 $7,094 $7,794 $5,029 $6,819 $3,189 $4,607

CF-RTR2-5444-??-?? 54 144 $2,567 $3,715 $4,170 $4,585 $2,957 $4,011 $3,439 $4,127

CF-RTR2-5468-??-?? 54 168 $3,001 $4,345 $4,882 $5,365 $3,459 $4,695 $4,022 $4,827

CF-RTR2-5492-??-?? 54 192 $3,510 $5,082 $5,712 $6,277 $4,049 $5,491 $4,703 $5,643

CF-RTR2-5416-??-?? 54 216 $4,214 $6,099 $6,852 $7,534 $4,858 $6,589 $5,646 $6,776

CF-RTR2-5440-??-?? 54 240 $4,844 $7,016 $7,881 $8,661 $5,587 $7,578 $6,492 $7,790

CF-RTR2-6044-??-?? 60 144 $2,820 $4,084 $4,590 $5,042 $3,251 $4,412 $3,778 $4,534

CF-RTR2-6068-??-?? 60 168 $3,300 $4,779 $5,368 $5,899 $3,805 $5,164 $4,422 $5,306

CF-RTR2-6092-??-?? 60 192 $3,863 $5,591 $6,283 $6,904 $4,454 $6,040 $5,176 $6,212

CF-RTR2-6016-??-?? 60 216 $4,633 $6,710 $7,538 $8,284 $5,344 $7,250 $6,209 $7,451

CF-RTR2-6040-??-?? 60 240 $5,329 $7,716 $8,670 $9,527 $6,142 $8,339 $7,142 $8,570

CF-RTR3-4816-??-?? 48 216 $3,974 $5,672 $6,346 $6,964 $4,554 $6,115 $3,832 $4,592

CF-RTR3-4840-??-?? 48 240 $4,540 $6,499 $7,276 $7,981 $5,209 $7,003 $3,869 $4,652

CF-RTR3-5416-??-?? 54 216 $4,393 $6,284 $7,035 $7,716 $5,041 $6,774 $5,887 $7,065

CF-RTR3-5440-??-?? 54 240 $5,025 $7,201 $8,065 $8,845 $5,769 $7,762 $6,733 $8,080

CF-RTR3-6016-??-?? 60 216 $4,814 $6,895 $7,722 $8,470 $5,528 $7,432 $6,450 $7,741

CF-RTR3-6040-??-?? 60 240 $5,510 $7,902 $8,854 $9,709 $6,329 $8,521 $7,383 $8,860

CF-RTR1-3672-??-?? 36 72 $931 $1,675 $2,187 $2,330 $1,033 $1,780 $1,156 $1,388

CF-RTR1-4284-??-?? 42 84 $940 $1,827 $2,423 $2,458 $1,073 $1,863 $1,240 $1,487

CF-RTR1-4884-??-?? 48 84 $1,020 $1,878 $2,489 $2,502 $1,206 $1,994 $1,277 $1,575

CF-RTR1-4296-??-?? 42 96 $1,107 $1,965 $2,580 $2,827 $1,257 $2,118 $1,483 $1,779

CF-RTR1-4896-??-?? 48 96 $1,203 $2,064 $2,660 $2,904 $1,388 $2,250 $1,611 $1,933

CF-RTR1-4820-??-?? 48 120 $1,594 $2,658 $3,164 $3,410 $1,810 $2,720 $2,137 $2,565


two piece top

three piece top



2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL










H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1

HPL

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

racetrack table top TFL edge options

racetrack table top HPL edge options





contents tables

CF-RTR1-3672-??-?? 36 72 $1,884 $2,476 $3,190 $3,508 $2,186 $2,558

CF-RTR1-4284-??-?? 42 84 $2,071 $2,761 $3,593 $3,952 $2,402 $2,857

CF-RTR1-4884-??-?? 48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001

CF-RTR1-4296-??-?? 42 96 $2,173 $2,929 $3,840 $4,223 $2,520 $3,034

CF-RTR1-4896-??-?? 48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182

CF-RTR1-4820-??-?? 48 120 NA NA NA NA NA NA

CF-RTRM-4820-?? 48 120 $2,089 $2,959 $3,488 $3,654 $2,286 $2,976

CF-RTRM-4844-?? 48 144 $2,386 $3,280 $3,698 $3,944 $2,588 $3,265

CF-RTRM-4868-?? 48 168 $2,662 $3,483 $3,958 $4,235 $2,936 $3,691

CF-RTRM-4892-?? 48 192 $2,964 $3,926 $4,302 $4,643 $3,288 $4,171

CF-RTRM-4816-?? 48 216 $3,389 $4,533 $4,986 $5,397 $3,775 $4,830

CF-RTRM-4840-?? 48 240 $3,766 $5,086 $5,605 $6,072 $4,213 $5,422

CF-RTRM-5444-?? 54 144 $2,571 $3,352 $3,864 $4,140 $2,793 $3,550

CF-RTRM-5468-?? 54 168 $2,861 $3,773 $4,131 $4,453 $3,122 $4,005

CF-RTRM-5492-?? 54 192 $3,199 $4,265 $4,683 $5,061 $3,509 $4,538

CF-RTRM-5416-?? 54 216 $3,669 $4,942 $5,443 $5,898 $4,037 $5,270

CF-RTRM-5440-?? 54 240 $4,089 $5,553 $6,131 $6,650 $4,515 $5,928

CF-RTRM-6044-?? 60 144 $2,739 $3,598 $3,936 $4,238 $2,987 $3,817

CF-RTRM-6068-?? 60 168 $3,060 $4,061 $4,455 $4,809 $3,349 $4,319

CF-RTRM-6092-?? 60 192 $3,401 $4,603 $5,064 $5,479 $3,775 $4,903

CF-RTRM-6016-?? 60 216 $3,949 $5,360 $5,901 $6,399 $4,356 $5,709

CF-RTRM-6040-?? 60 240 $4,413 $6,021 $6,656 $7,227 $4,879 $6,434

CF-RTR3-4816-??-?? 48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850

CF-RTR3-4840-??-?? 48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232

CF-RTR3-5416-??-?? 54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714

CF-RTR3-5440-??-?? 54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121

CF-RTR3-6016-??-?? 60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998

CF-RTR3-6040-??-?? 60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431

CF-RTR2-4820-??-?? 48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955

CF-RTR2-4844-??-?? 48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335

CF-RTR2-4868-??-?? 48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729

CF-RTR2-4892-??-?? 48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111



CF-RTR2-5444-??-?? 54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603

CF-RTR2-5468-??-?? 54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010

CF-RTR2-5492-??-?? 54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417



CF-RTR2-6044-??-?? 60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806

CF-RTR2-6068-??-?? 60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239

CF-RTR2-6092-??-?? 60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673



racetrack table top veneer edge options - subject to minimum order requirements, see below.

multi-finish racetrack table topTFL edge options




V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number


2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL

one piece top

two piece top

three piece top





contents tables

CF-BOT3-4816-??-?? 42-48 216 $2,649 $3,781 $4,479 $4,888 $3,036 $4,077

CF-BOT3-4840-??-?? 42-48 240 $3,026 $4,333 $5,095 $5,567 $3,473 $4,669

CF-BOT3-5416-??-?? 44-54 216 $2,929 $4,189 $4,964 $5,416 $3,360 $4,516

CF-BOT3-5440-??-?? 44-54 240 $3,350 $4,801 $5,649 $6,170 $3,846 $5,174

CF-BOT3-6016-??-?? 50-60 216 $3,209 $4,597 $5,448 $5,946 $3,685 $4,955

CF-BOT3-6040-??-?? 50-60 240 $3,673 $5,268 $6,203 $6,775 $4,219 $5,680

CF-BOT2-4820-??-?? 42-48 120 $1,229 $2,083 $2,612 $2,777 $1,426 $2,101

CF-BOT2-4844-??-?? 42-48 144 $1,526 $2,217 $2,823 $3,100 $1,761 $2,388

CF-BOT2-4868-??-?? 42-48 168 $1,802 $2,607 $3,115 $3,401 $2,076 $2,815

CF-BOT2-4892-??-?? 42-48 192 $2,104 $3,050 $3,611 $3,946 $2,428 $3,296

CF-BOT2-4816-??-?? 42-48 216 $2,529 $3,658 $4,357 $4,765 $2,915 $3,954

CF-BOT2-4840-??-?? 42-48 240 $2,906 $4,210 $4,972 $5,442 $3,353 $4,546

CF-BOT2-5444-??-?? 44-54 144 $1,711 $2,476 $2,965 $3,240 $1,971 $2,674

CF-BOT2-5468-??-?? 44-54 168 $2,001 $2,896 $3,459 $3,780 $2,306 $3,129

CF-BOT2-5492-??-?? 44-54 192 $2,340 $3,388 $4,011 $4,387 $2,699 $3,661

CF-BOT2-5416-??-?? 44-54 216 $2,809 $4,065 $4,841 $5,295 $3,239 $4,393

CF-BOT2-5440-??-?? 44-54 240 $3,229 $4,677 $5,526 $6,048 $3,724 $5,052

CF-BOT2-6044-??-?? 50-60 144 $1,880 $2,723 $3,261 $3,564 $2,167 $2,941

CF-BOT2-6068-??-?? 50-60 168 $2,200 $3,186 $3,803 $4,160 $2,537 $3,442

CF-BOT2-6092-??-?? 50-60 192 $2,575 $3,727 $4,413 $4,829 $2,969 $4,027

CF-BOT2-6016-??-?? 50-60 216 $3,089 $4,473 $5,326 $5,823 $3,562 $4,833

CF-BOT2-6040-??-?? 50-60 240 $3,553 $5,144 $6,080 $6,652 $4,094 $5,559

CF-BOT1-3672-??-?? 30-36 72 $575 $1,117 $1,594 $1,690 $676 $1,187

CF-BOT1-4284-??-?? 36-42 84 $653 $1,218 $1,752 $1,916 $703 $1,242

CF-BOT1-4884-??-?? 42-48 84 $718 $1,252 $1,626 $1,684 $789 $1,329

CF-BOT1-4296-??-?? 36-42 96 $737 $1,309 $1,856 $2,021 $823 $1,412

CF-BOT1-4896-??-?? 42-48 96 $802 $1,376 $1,908 $2,040 $910 $1,500

CF-BOT1-4820-??-?? 42-48 120 $1,063 $1,772 $2,167 $2,332 $1,184 $1,813


two piece top

three piece top

CF-BOT2-4820-??-?? 42-48 120 $1,953 $3,125 $3,919 $4,165 $2,139 $3,151 $2,259 $2,710

CF-BOT2-4844-??-?? 42-48 144 $2,289 $3,326 $4,234 $4,651 $2,642 $3,582 $2,468 $3,081

CF-BOT2-4868-??-?? 42-48 168 $2,704 $3,911 $4,673 $5,101 $3,114 $4,223 $2,599 $3,145

CF-BOT2-4892-??-?? 42-48 192 $3,156 $4,576 $5,416 $5,919 $3,643 $4,944 $2,635 $3,205

CF-BOT2-4816-??-?? 42-48 216 $3,794 $5,487 $6,535 $7,148 $4,373 $5,931 $3,152 $4,547

CF-BOT2-4840-??-?? 42-48 240 $4,359 $6,315 $7,459 $8,164 $5,029 $6,819 $3,189 $4,607

CF-BOT2-5444-??-?? 44-54 144 $2,567 $3,715 $4,448 $4,860 $2,957 $4,011 $3,439 $4,127

CF-BOT2-5468-??-?? 44-54 168 $3,001 $4,345 $5,189 $5,671 $3,459 $4,695 $4,022 $4,827

CF-BOT2-5492-??-?? 44-54 192 $3,510 $5,082 $6,017 $6,580 $4,049 $5,491 $4,703 $5,643

CF-BOT2-5416-??-?? 44-54 216 $4,214 $6,099 $7,262 $7,942 $4,858 $6,589 $5,646 $6,776

CF-BOT2-5440-??-?? 44-54 240 $4,844 $7,016 $8,289 $9,072 $5,587 $7,578 $6,492 $7,790

CF-BOT2-6044-??-?? 50-60 144 $2,820 $4,084 $4,892 $5,347 $3,251 $4,412 $3,778 $4,534

CF-BOT2-6068-??-?? 50-60 168 $3,300 $4,779 $5,705 $6,240 $3,805 $5,164 $4,422 $5,306

CF-BOT2-6092-??-?? 50-60 192 $3,863 $5,591 $6,620 $7,244 $4,454 $6,040 $5,176 $6,212

CF-BOT2-6016-??-?? 50-60 216 $4,633 $6,710 $7,989 $8,735 $5,344 $7,250 $6,209 $7,451

CF-BOT2-6040-??-?? 50-60 240 $5,329 $7,716 $9,120 $9,978 $6,142 $8,339 $7,142 $8,570

CF-BOT3-4816-??-?? 42-48 216 $3,974 $5,672 $6,719 $7,332 $4,554 $6,115 $3,832 $4,592

CF-BOT3-4840-??-?? 42-48 240 $4,540 $6,499 $7,643 $8,351 $5,209 $7,003 $3,869 $4,652

CF-BOT3-5416-??-?? 44-54 216 $4,393 $6,284 $7,446 $8,124 $5,041 $6,774 $5,887 $7,065

CF-BOT3-5440-??-?? 44-54 240 $5,025 $7,201 $8,474 $9,256 $5,769 $7,762 $6,733 $8,080

CF-BOT3-6016-??-?? 50-60 216 $4,814 $6,895 $8,171 $8,919 $5,528 $7,432 $6,450 $7,741

CF-BOT3-6040-??-?? 50-60 240 $5,510 $7,902 $9,304 $10,162 $6,329 $8,521 $7,383 $8,860

CF-BOT1-3672-??-?? 30-36 72 $931 $1,675 $2,392 $2,536 $1,014 $1,780 $1,156 $1,388

CF-BOT1-4284-??-?? 36-42 84 $980 $1,827 $2,629 $2,874 $1,055 $1,863 $1,214 $1,576

CF-BOT1-4884-??-?? 42-48 84 $1,076 $1,878 $2,439 $2,526 $1,185 $1,994 $1,277 $1,675

CF-BOT1-4296-??-?? 36-42 96 $1,107 $1,965 $2,785 $3,032 $1,234 $2,118 $1,483 $1,779

CF-BOT1-4896-??-?? 42-48 96 $1,203 $2,064 $2,863 $3,061 $1,366 $2,250 $1,611 $1,933

CF-BOT1-4820-??-?? 42-48 120 $1,594 $2,658 $3,251 $3,498 $1,775 $2,720 $2,137 $2,565


two piece top

three piece top



2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL










H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1

HPL

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

boatshaped table top TFL edge options

boatshaped table top HPL edge options





contents tables

CF-BOT1-3672-??-?? 30-36 72 $1,884 $2,476 $3,190 $3,508 $2,186 $2,558

CF-BOT1-4284-??-?? 36-42 84 $2,071 $2,761 $3,593 $3,952 $2,402 $2,857

CF-BOT1-4884-??-?? 42-48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001

CF-BOT1-4296-??-?? 36-42 96 $2,173 $2,929 $3,840 $4,223 $2,520 $3,034

CF-BOT1-4896-??-?? 42-48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182

CF-BOT1-4820-??-?? 42-48 120 NA NA NA NA NA NA

CF-BOTM-4820-?? 42-48 120 $2,089 $2,959 $3,488 $3,652 $2,104 $2,750

CF-BOTM-4844-?? 42-48 144 $2,386 $3,093 $3,698 $3,976 $2,588 $3,265

CF-BOTM-4868-?? 42-48 168 $2,662 $3,483 $3,990 $4,276 $2,936 $3,691

CF-BOTM-4892-?? 42-48 192 $2,964 $3,926 $4,487 $4,821 $3,288 $4,171

CF-BOTM-4816-?? 42-48 216 $3,389 $4,533 $5,232 $5,641 $3,775 $4,830

CF-BOTM-4840-?? 42-48 240 $3,766 $5,086 $5,848 $6,318 $4,213 $5,422

CF-BOTM-5444-?? 44-54 144 $2,571 $3,352 $3,841 $4,115 $2,793 $3,550

CF-BOTM-5468-?? 44-54 168 $2,861 $3,773 $4,335 $4,656 $3,122 $4,005

CF-BOTM-5492-?? 44-54 192 $3,199 $4,157 $4,888 $5,263 $3,509 $4,538

CF-BOTM-5416-?? 44-54 216 $3,669 $4,942 $5,717 $6,170 $4,037 $5,270

CF-BOTM-5440-?? 44-54 240 $4,089 $5,553 $6,402 $6,923 $4,515 $5,928

CF-BOTM-6044-?? 50-60 144 $2,739 $3,598 $4,137 $4,440 $2,987 $3,817

CF-BOTM-6068-?? 50-60 168 $3,060 $4,061 $4,679 $5,036 $3,349 $4,319

CF-BOTM-6092-?? 50-60 192 $3,435 $4,603 $5,289 $5,704 $3,775 $4,903

CF-BOTM-6016-?? 50-60 216 $3,949 $5,350 $6,202 $6,700 $4,356 $5,709

CF-BOTM-6040-?? 50-60 240 $4,413 $6,021 $6,956 $7,528 $4,879 $6,434

CF-BOT3-4816-??-?? 42-48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850

CF-BOT3-4840-??-?? 42-48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232

CF-BOT3-5416-??-?? 44-54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714

CF-BOT3-5440-??-?? 44-54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121

CF-BOT3-6016-??-?? 50-60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998

CF-BOT3-6040-??-?? 50-60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431

CF-BOT2-4820-??-?? 42-48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955

CF-BOT2-4844-??-?? 42-48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335

CF-BOT2-4868-??-?? 42-48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729

CF-BOT2-4892-??-?? 42-48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111



CF-BOT2-5444-??-?? 44-54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603

CF-BOT2-5468-??-?? 44-54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010

CF-BOT2-5492-??-?? 44-54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417



CF-BOT2-6044-??-?? 50-60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806

CF-BOT2-6068-??-?? 50-60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239

CF-BOT2-6092-??-?? 50-60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673



boatshaped table top veneer edge options - subject to minimum order requirements, see below.

multi-finish boatshaped table topTFL edge options




V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number


2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL

one piece top

two piece top

three piece top





contents tables

CF-BOW3-4816-??-?? 48 216 $2,649 $3,781 $4,231 $4,643 $3,036 $4,077

CF-BOW3-4840-??-?? 48 240 $3,026 $4,333 $4,851 $5,321 $3,473 $4,669

CF-BOW3-5416-??-?? 54 216 $2,929 $4,189 $4,689 $5,144 $3,360 $4,516

CF-BOW3-5440-??-?? 54 240 $3,350 $4,801 $5,377 $5,897 $3,846 $5,174

CF-BOW3-6016-??-?? 60 216 $3,209 $4,597 $5,148 $5,646 $3,685 $4,955

CF-BOW3-6040-??-?? 60 240 $3,673 $5,268 $5,902 $6,473 $4,219 $5,680

CF-BOW2-4820-??-?? 48 120 $1,229 $2,083 $2,612 $2,777 $1,426 $2,101

CF-BOW2-4844-??-?? 48 144 $1,526 $2,210 $2,823 $3,100 $1,761 $2,388

CF-BOW2-4868-??-?? 48 168 $1,802 $2,606 $3,115 $3,401 $2,076 $2,815

CF-BOW2-4892-??-?? 48 192 $2,104 $3,050 $3,427 $3,767 $2,428 $3,296

CF-BOW2-4816-??-?? 48 216 $2,529 $3,658 $4,110 $4,521 $2,915 $3,954

CF-BOW2-4840-??-?? 48 240 $2,906 $4,210 $4,728 $5,196 $3,353 $4,546

CF-BOW2-5444-??-?? 54 144 $1,711 $2,476 $2,780 $3,057 $1,971 $2,674

CF-BOW2-5468-??-?? 54 168 $2,001 $2,896 $3,254 $3,577 $2,306 $3,129

CF-BOW2-5492-??-?? 54 192 $2,340 $3,388 $3,807 $4,185 $2,699 $3,661

CF-BOW2-5416-??-?? 54 216 $2,809 $4,065 $4,568 $5,022 $3,239 $4,393

CF-BOW2-5440-??-?? 54 240 $3,229 $4,677 $5,254 $5,774 $3,724 $5,052

CF-BOW2-6044-??-?? 60 144 $1,880 $2,723 $3,060 $3,361 $2,167 $2,941

CF-BOW2-6068-??-?? 60 168 $2,200 $3,187 $3,579 $3,932 $2,537 $3,442

CF-BOW2-6092-??-?? 60 192 $2,575 $3,727 $4,188 $4,602 $2,969 $4,027

CF-BOW2-6016-??-?? 60 216 $3,089 $4,473 $5,025 $5,522 $3,562 $4,833

CF-BOW2-6040-??-?? 60 240 $3,553 $5,144 $5,780 $6,351 $4,094 $5,559

CF-BOW1-3672-??-?? 36 72 $575 $1,117 $1,458 $1,553 $688 $1,187

CF-BOW1-4284-??-?? 42 84 $617 $1,218 $1,615 $1,638 $716 $1,242

CF-BOW1-4884-??-?? 48 84 $680 $1,252 $1,550 $1,669 $804 $1,329

CF-BOW1-4296-??-?? 42 96 $737 $1,309 $1,720 $1,884 $838 $1,412

CF-BOW1-4896-??-?? 48 96 $802 $1,376 $1,773 $1,935 $926 $1,500

CF-BOW1-4820-??-?? 48 120 $1,063 $1,772 $2,109 $2,273 $1,206 $1,813


two piece top

three piece top

CF-BOW2-4820-??-?? 48 120 $1,953 $3,125 $3,919 $4,165 $2,139 $3,151 $2,259 $2,710

CF-BOW2-4844-??-?? 48 144 $2,289 $3,316 $4,234 $4,651 $2,642 $3,582 $2,468 $3,081

CF-BOW2-4868-??-?? 48 168 $2,704 $3,909 $4,673 $5,101 $3,114 $4,223 $2,599 $3,145

CF-BOW2-4892-??-?? 48 192 $3,156 $4,576 $5,141 $5,650 $3,643 $4,944 $2,635 $3,205

CF-BOW2-4816-??-?? 48 216 $3,794 $5,487 $6,165 $6,782 $4,373 $5,931 $3,152 $4,547

CF-BOW2-4840-??-?? 48 240 $4,359 $6,315 $7,092 $7,794 $5,029 $6,819 $3,189 $4,607

CF-BOW2-5444-??-?? 54 144 $2,567 $3,715 $4,170 $4,585 $2,957 $4,011 $3,439 $4,127

CF-BOW2-5468-??-?? 54 168 $3,001 $4,345 $4,882 $5,365 $3,459 $4,695 $4,022 $4,827

CF-BOW2-5492-??-?? 54 192 $3,510 $5,082 $5,712 $6,277 $4,049 $5,491 $4,703 $5,643

CF-BOW2-5416-??-?? 54 216 $4,214 $6,099 $6,852 $7,534 $4,858 $6,589 $5,646 $6,776

CF-BOW2-5440-??-?? 54 240 $4,844 $7,016 $7,881 $8,661 $5,587 $7,578 $6,492 $7,790

CF-BOW2-6044-??-?? 60 144 $2,820 $4,084 $4,590 $5,042 $3,251 $4,412 $3,778 $4,534

CF-BOW2-6068-??-?? 60 168 $3,300 $4,780 $5,368 $5,899 $3,805 $5,164 $4,422 $5,306

CF-BOW2-6092-??-?? 60 192 $3,863 $5,591 $6,283 $6,904 $4,454 $6,040 $5,176 $6,212

CF-BOW2-6016-??-?? 60 216 $4,633 $6,710 $7,538 $8,284 $5,344 $7,250 $6,209 $7,451

CF-BOW2-6040-??-?? 60 240 $5,329 $7,716 $8,670 $9,527 $6,142 $8,339 $7,142 $8,570

CF-BOW3-4816-??-?? 48 216 $3,974 $5,672 $6,346 $6,964 $4,554 $6,115 $3,832 $4,592

CF-BOW3-4840-??-?? 48 240 $4,540 $6,499 $7,276 $7,981 $5,209 $7,003 $3,869 $4,652

CF-BOW3-5416-??-?? 54 216 $4,393 $6,284 $7,035 $7,716 $5,041 $6,774 $5,887 $7,065

CF-BOW3-5440-??-?? 54 240 $5,025 $7,201 $8,065 $8,845 $5,769 $7,762 $6,733 $8,080

CF-BOW3-6016-??-?? 60 216 $4,814 $6,895 $7,722 $8,470 $5,528 $7,432 $6,450 $7,741

CF-BOW3-6040-??-?? 60 240 $5,510 $7,902 $8,854 $9,709 $6,329 $8,521 $7,383 $8,860

CF-BOW1-3672-??-?? 36 72 $931 $1,675 $2,187 $2,330 $1,033 $1,780 $1,156 $1,388

CF-BOW1-4284-??-?? 42 84 $926 $1,827 $2,423 $2,458 $1,073 $1,863 $1,240 $1,487

CF-BOW1-4884-??-?? 48 84 $1,020 $1,878 $2,324 $2,504 $1,206 $1,994 $1,277 $1,575

CF-BOW1-4296-??-?? 42 96 $1,107 $1,965 $2,580 $2,827 $1,257 $2,118 $1,483 $1,779

CF-BOW1-4896-??-?? 48 96 $1,203 $2,064 $2,660 $2,904 $1,388 $2,250 $1,611 $1,933

CF-BOW1-4820-??-?? 48 120 $1,594 $2,658 $3,164 $3,410 $1,810 $2,720 $2,137 $2,565


two piece top

three piece top



2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL










H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1

HPL

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

bow-end table top TFL edge options

bow-end table top HPL edge options





contents tables

CF-BOW1-3672-??-?? 36 72 $1,884 $2,476 $3,052 $3,358 $2,186 $2,558

CF-BOW1-4284-??-?? 42 84 $2,071 $2,761 $3,456 $3,801 $2,402 $2,857

CF-BOW1-4884-??-?? 48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001

CF-BOW1-4296-??-?? 42 96 $2,173 $2,929 $3,704 $4,075 $2,520 $3,034

CF-BOW1-4896-??-?? 48 96 $2,284 $3,072 $3,888 $4,275 $2,649 $3,182

CF-BOW1-4820-??-?? 48 120 NA NA NA NA NA NA

CF-BOWM-4820-?? 48 120 $2,089 $2,959 $3,488 $3,652 $2,286 $2,976

CF-BOWM-4844-?? 48 144 $2,386 $3,086 $3,698 $3,976 $2,588 $3,265

CF-BOWM-4868-?? 48 168 $2,662 $3,482 $3,990 $4,276 $2,936 $3,691

CF-BOWM-4892-?? 48 192 $2,964 $3,926 $4,302 $4,643 $3,288 $4,171

CF-BOWM-4816-?? 48 216 $3,389 $4,533 $4,986 $5,397 $3,775 $4,830

CF-BOWM-4840-?? 48 240 $3,766 $5,086 $5,604 $6,072 $4,213 $5,422

CF-BOWM-5444-?? 54 144 $2,571 $3,352 $3,864 $4,140 $2,793 $3,550

CF-BOWM-5468-?? 54 168 $2,861 $3,773 $4,131 $4,453 $3,122 $4,005

CF-BOWM-5492-?? 54 192 $3,199 $4,265 $4,683 $5,061 $3,509 $4,538

CF-BOWM-5416-?? 54 216 $3,669 $4,942 $5,443 $5,898 $4,037 $5,270

CF-BOWM-5440-?? 54 240 $4,089 $5,553 $6,131 $6,650 $4,515 $5,928

CF-BOWM-6044-?? 60 144 $2,739 $3,598 $3,936 $4,238 $2,987 $3,817

CF-BOWM-6068-?? 60 168 $3,060 $4,061 $4,455 $4,809 $3,349 $4,319

CF-BOWM-6092-?? 60 192 $3,435 $4,603 $5,064 $5,479 $3,775 $4,903

CF-BOWM-6016-?? 60 216 $3,949 $5,350 $5,901 $6,399 $4,356 $5,709

CF-BOWM-6040-?? 60 240 $4,413 $6,021 $6,656 $7,227 $4,879 $6,434

CF-BOW3-4816-??-?? 48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850

CF-BOW3-4840-??-?? 48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232

CF-BOW3-5416-??-?? 54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714

CF-BOW3-5440-??-?? 54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121

CF-BOW3-6016-??-?? 60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998

CF-BOW3-6040-??-?? 60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431

CF-BOW2-4820-??-?? 48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955

CF-BOW2-4844-??-?? 48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335

CF-BOW2-4868-??-?? 48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729

CF-BOW2-4892-??-?? 48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111



CF-BOW2-5444-??-?? 54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603

CF-BOW2-5468-??-?? 54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010

CF-BOW2-5492-??-?? 54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417



CF-BOW2-6044-??-?? 60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806

CF-BOW2-6068-??-?? 60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239

CF-BOW2-6092-??-?? 60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673



bow-end table top veneer edge options - subject to minimum order requirements, see below.

multi-finish bow-end table topTFL edge options




V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number


2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL

one piece top

two piece top

three piece top





contents tables

CF-SLN3-6016-??-?? 36-60 216 $3,411 $4,801 $5,653 $6,150 $3,890 $5,160

CF-SLN3-6040-??-?? 36-60 240 $3,874 $5,471 $6,407 $6,979 $4,343 $5,885

CF-SLN2-6020-??-?? 36-60 120 $1,324 $2,038 $2,435 $2,598 $1,446 $2,080

CF-SLN2-6044-??-?? 36-60 144 $2,081 $2,927 $3,465 $3,768 $2,374 $3,146

CF-SLN2-6068-??-?? 36-60 168 $2,402 $3,389 $4,009 $4,363 $2,692 $3,646

CF-SLN2-6092-??-?? 36-60 192 $2,829 $3,932 $4,618 $5,032 $3,172 $4,231

CF-SLN2-6016-??-?? 36-60 216 $3,291 $4,679 $5,531 $6,027 $3,697 $5,037

CF-SLN2-6040-??-?? 36-60 240 $3,753 $5,349 $6,283 $6,854 $4,221 $5,763

CF-SLN1-4896-??-?? 30-48 96 $1,022 $1,580 $1,948 $2,113 $1,130 $1,704

CF-SLN1-5496-??-?? 30-54 96 $1,094 $1,660 $2,047 $2,218 $1,187 $1,788

CF-SLN1-6020-??-?? 36-60 120 $1,106 $1,742 $2,149 $2,330 $1,418 $1,878


two piece top

three piece top

CF-SLN2-6020-??-?? 36-60 120 $1,986 $3,058 $3,652 $3,897 $2,168 $3,120 $2,661 $3,193

CF-SLN2-6044-??-?? 36-60 144 $3,122 $4,390 $5,198 $5,652 $3,562 $4,720 $4,183 $5,019

CF-SLN2-6068-??-?? 36-60 168 $3,604 $5,085 $6,014 $6,545 $4,037 $5,469 $4,829 $5,794

CF-SLN2-6092-??-?? 36-60 192 $4,243 $5,899 $6,926 $7,547 $4,758 $6,346 $5,685 $6,822

CF-SLN2-6016-??-?? 36-60 216 $4,936 $7,019 $8,296 $9,041 $5,546 $7,556 $6,613 $7,936

CF-SLN2-6040-??-?? 36-60 240 $5,631 $8,024 $9,424 $10,280 $6,333 $8,644 $7,544 $9,052

CF-SLN3-6016-??-?? 36-60 216 $5,116 $7,201 $8,480 $9,225 $5,834 $7,741 $6,855 $8,225

CF-SLN3-6040-??-?? 36-60 240 $5,812 $8,208 $9,612 $10,470 $6,515 $8,829 $7,788 $9,344

CF-SLN1-4896-??-?? 30-48 96 $1,534 $2,370 $2,922 $3,170 $1,696 $2,555 $2,054 $2,466

CF-SLN1-5496-??-?? 30-54 96 $1,641 $2,490 $3,070 $3,328 $1,780 $2,682 $2,200 $2,638

CF-SLN1-6020-??-?? 36-60 120 $1,659 $2,614 $3,223 $3,494 $2,127 $2,817 $2,221 $2,667


two piece top

three piece top



2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL










H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1

HPL

2mm PVC

B1 B2

B33/8" Wood

C1 C2

C41-1/8" Wood

D22" Wood

D1

E1

2mm PVC

F1

3/8" Wood

A1 K1 P1

sightline table top TFL edge options

sightline table top HPL edge options





contents tables

OP-REVL-01 Tops up to 96" $253

OP-REVL-02 Tops from 97" to 120" $321




Model Number Table Top Length Price

reveal below table top

- Reveal raises the overall height of the table by 1/2".- Specify silver metallic, white, black or matching PVC finish for reveal. - Reveal is 1/2" thick and is inset 1/2" from edge of table top.

for all conference table tops

for round and square table topsOP-REVL-11 Round or Square Tops up to 60" $261

CF-SLN1-4896-??-?? 30-48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182

CF-SLN1-5496-??-?? 30-54 96 $2,928 $3,749 $4,740 $5,215 $3,397 $3,864

CF-SLN1-6020-??-?? 36-60 120 NA NA NA NA NA NA

CF-SLNM-6020-?? 36-60 120 $2,184 $2,915 $3,310 $3,474 $2,306 $2,956

CF-SLNM-6044-?? 36-60 144 $2,941 $3,804 $4,343 $4,645 $3,190 $4,023

CF-SLNM-6068-?? 36-60 168 $3,261 $4,266 $4,886 $5,240 $3,551 $4,522

CF-SLNM-6092-?? 36-60 192 $3,636 $4,809 $5,494 $5,907 $3,974 $5,107

CF-SLNM-6016-?? 36-60 216 $4,150 $5,554 $6,406 $6,902 $4,557 $5,913

CF-SLNM-6040-?? 36-60 240 $4,613 $6,224 $7,159 $7,731 $5,081 $6,639

CF-SLN3-6016-??-?? 36-60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998

CF-SLN3-6040-??-?? 36-60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431

CF-SLN2-6020-??-?? 36-60 120 $5,249 $6,235 $7,422 $8,165 $6,088 $6,372

CF-SLN2-6044-??-?? 36-60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806

CF-SLN2-6068-??-?? 36-60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239

CF-SLN2-6092-??-?? 36-60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673



sightline table top veneer edge options - subject to minimum order requirements, see below.

multi-finish sightline table topTFL edge options




V1-M1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


N1

2mm Wood


F1

3/8" Wood

V1-B? V1-C? V1-D? V1-E1 V1-F1

M1

Natural Veneer

Model Number


2mm PVC

T1-A1


B1 B2

B33/8" Wood


C1 C2

C41-1/8" Wood


D22" Wood


D1


E1

2mm PVC


F1

3/8" Wood

T1-B? T1-C? T1-D? T1-E1 T1-F1

A1

TFL

one piece top

two piece top

three piece top





contents tables

malibu bases

rectangular panel square

- constructed of 1-1/8" thick material- side panels available in the same or a different finish than end panels- standard in TFL, HPL available at an upcharge - edges are 2mm PVC- hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- end bases include a wire management grommet hole near top of base on trough side- middle bases include a wire management grommet hole near top of base on both sides

- 5" deep- 20" wide, 24" wide & 30" wide- 2-1/2" x 6" wire management cutout in top - 2-1/2" grommet in bottom- rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 36" x 72"- maximum table size: 60" x 240"

- 12" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- rectangular, racetrack, boatshaped, bow-end and sightline tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"

- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- square, rectangular, racetrack, boatshaped, bow-end and sightline tops - minimum table size: 36" x 36"- maximum table size: 60" x 240"

offering

details





contents tables

CF-BSQ2-1-18 36" Square 18 1 $461

CF-BSQ2-1-20 42" Square 20 1 $519

CF-BSQ2-1-24 48" Square 24 1 $576

CF-BSQ2-1-30 54", 60" Square 30 1 $650

- Standard in single TFL finish. No charge for side panels in a different TFL finish. Must specify on PO.- For silver metallic side panels add OP-CONF-SLVP for $141 per base.- Square bases are hollow with 10" square openings at top and bottom for wire management. - Square bases should not be used with round tops. - Non-radiused edge bases are not available with kickplate.

malibu base for square table tops

pricing

Model Number Price

Table Top Size(s) Base Size Bases

Included

optional wire access door Model Number Price

OP-CONF-51 for one base $515

- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.

BasesIncluded

wire management stretcher trough

Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.

grain direction

optional stainless steel side panels

For silver metallic side panels add OP-CONF-SLVP for $141 per base.

table tops for malibu bases

square* rectangular racetrack boatshape bow-end sightline**rectangular/square bases only*square base only

malibu base details





contents tables

CF-BPN5-24-240 48 x 240 24 44 3/4 $1,580

CF-BPN5-30-240 54 x 240, 60 x 240 30 44 3/4 $1,603

Center of 4th Base

36 72 17-1/2 54-1/2

42/48 84 20-1/2 63-1/2

42/48 96 20-1/2 75-1/2

48 120 20-1/2 60 99-1/2

48/54/60 144 20-1/2 72 123-1/2

48/54/60 168 20-1/2 84 147-1/2

48/54/60 192 20-1/2 70-13/16 121-3/16 171-1/2

48/54/60 216 20-1/2 78-13/16 137-7/16 195-1/2

48/54/60 240 20-1/2 70-1/4 120 169-3/4 219-1/2

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

base placement rectangular, racetrack, boatshape and bow-end table tops

For 36" and 42" Deep Table Tops

For 48" Wide Deep Table Tops


5"

30"

2-3/4"

27-5/8"

1st2nd

3rd4th

5th

Center of 5th Base

2-1/2"

6"

dimensions

CF-BPN4-24-168 48 x 168 24 37 1/4 $1,265

CF-BPN4-30-168 54 x 168, 60 x 168 30 37 1/4 $1,283

CF-BPN4-24-192 48 x 192 24 45 1/4 $1,301

CF-BPN4-30-192 54 x 192, 60 x 192 30 45 1/4 $1,320

CF-BPN4-24-216 48 x 216 24 53 1/4 $1,316

CF-BPN4-30-216 54 x 216, 60 x 216 30 53 1/4 $1,334

CF-BPN3-24-120 48 x 120 24 34 1/2 $1,055

CF-BPN3-24-144 48 x 144 24 46 1/2 $1,070

CF-BPN3-30-144 54 x 144, 60 x 144 30 46 1/2 $1,084

CF-BPN2-20-72 36 x 72 20 32 $607

CF-BPN2-20-84 42 x 84 20 38 $686

CF-BPN2-24-84 48 x 84 24 38 $718

CF-BPN2-20-96 42 x 96 20 50 $702

CF-BPN2-24-96 48 x 96 24 50 $747

Model Number Price

Table Top Size(s) Base Size Stretcher

Length

2 Bases & 1 Stretcher

3 Bases & 2 Stretchers



- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- 5" thick panel bases are hollow with 2.5" x 8" opening at top and a 2.5" grommet at the bottom for wire management.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.




BasesIncluded

pricing

5"

24"

2-3/4"

21-5/8"

2-1/2"

6"

5"

20"

2-3/4"

17-5/8"

2-1/2"

6"

malibu panel base

Side Elevation

3-1/2"

28-5/8"





contents tables

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th

36 72 18 54

42/48 84 24 60

42/48 96 24 72

48* 120 24 96

48** 120 24 60 96

48/54/60 144 24 72 120

48/54/60 168 24 84 144

48/54/60 192 24 72 120 168

48/54/60 216 24 80 136 192

48/54/60 240 24 88 152 216

base placement rectangular, racetrack, boatshape, bow-end and sightline table tops

*one piece top**two and three piece top

malibu rectangular base




BasesIncluded

Model Number Price


Length

pricing

CF-BRN4-24-192 48 x 192 24 36 $2,629

CF-BRN4-30-192 54 x 192, 60 x 192 30 36 $2,759

CF-BRN4-24-216 48 x 216 24 44 $2,669

CF-BRN4-30-216 54 x 216, 60 x 216 30 44 $2,919

CF-BRN4-24-240 48 x 240 24 52 $2,770

CF-BRN4-30-240 54 x 240, 60 x 240 30 52 $3,021

CF-BRN3-24-120 48 x 120 (2 & 3 piece top) 24 24 $2,055

CF-BRN3-24-144 48 x 144 24 36 $2,094

CF-BRN3-30-144 54 x 144, 60 x 144 30 36 $2,212

CF-BRN3-24-168 48 x 168 24 48 $2,135

CF-BRN3-30-168 54 x 168, 60 x 168 30 48 $2,253

CF-BRN2-18-72 36 x 72 18 24 $1,052

CF-BRN2-18-84 42 x 84 18 24 $1,087

CF-BRN2-24-84 48 x 84 24 24 $1,167

CF-BRN2-18-96 42 x 96, 18 36 $1,119

CF-BRN2-24-96 48 x 96 24 36 $1,198

CF-BRN2-24-120 48 x 120 (1 piece top) 24 60 $1,232




- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10"x15.5" opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.


For 48" Deep Table Tops


12"

30"

9-3/4"

27-5/8"

10"

15-1/2"

dimensions

Side Elevation

3-1/2"

28-5/8"

12"

24"

9-3/4"

21-5/8"

10"

15-1/2"

12"

18"

9-3/4"

15-5/8"

10"

15-1/2"





contents tables


malibu square base




BasesIncluded

dimensions

Model Number Price


Length

pricing

CF-BSN4-24-192 48 x 192 24 20 $2,695

CF-BSN4-30-192 54 x 192, 60 x 192 30 12 $3,096

CF-BSN4-24-216 48 x 216 24 28 $2,854

CF-BSN4-30-216 54 x 216, 60 x 216 30 20 $3,255

CF-BSN4-24-240 48 x 240 24 36 $2,956

CF-BSN4-30-240 54 x 240, 60 x 240 30 28 $3,357

CF-BSN3-24-144 48 x 144 24 18 $2,144

CF-BSN3-30-144 54 x 144, 60 x 144 30 9 $2,424

CF-BSN3-24-168 48 x 168 24 30 $2,186

CF-BSN3-30-168 54 x 168, 60 x 168 30 21 $2,466

CF-BSN2-18-72 36 x 72 18 12 $1,081

CF-BSN2-18-84 42 x 84 18 12 $1,114

CF-BSN2-18-96 42 x 96 18 24 $1,146

CF-BSN2-24-96 48 x 96 24 12 $1,419

CF-BSN2-24-120 48 x 120 24 36 $1,453




- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.

36 72 21 51

42 84 27 57

42 96 27 69

48 96 30 66

48 120 30 90

48 144 30 72 114

48 168 30 84 138

48 192 30 74 118 162

48 216 30 82 134 186

48 240 30 90 150 210

54/60 144 33 72 111

54/60 168 33 84 135

54/60 192 33 75 117 159

54/60 216 33 83 133 183

54/60 240 33 91 149 207

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th

For 36"and 42" Deep Table Tops



30"

30"

27-3/4"

27-5/8"

10"

10"

24"

24"

21-3/4"

21-5/8"

10"

10"

18"

18"

15-3/4"

15-5/8"

10"

10"

Side Elevation

3-1/2"

28-5/8"





contents tables

48 96 24 72

54 96 24 72

60 120 24 96

60 120 24 60 96

60 144 24 72 120

60 168 24 84 144

60 192 24 72 120 168

60 216 24 80 136 192

60 240 24 88 152 216

square base placement sightline table tops

48 96 27 69

54 96 27 66

60 120 27 90

60 120 27 57 90

60 144 27 69 114

60 168 27 81 138

60 192 27 69 114 162

60 216 27 77 130 186

60 240 27 85 146 210

1st2nd

3rd4th

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

pricing - square bases

CF-BSS4-1824-192 60 x 192 18-18-24-24 24 $2,189

CF-BSS4-1824-216 60 x 216 18-18-24-24 32 $2,348

CF-BSS4-1824-240 60 x 240 18-18-24-24 40 $2,450

CF-BSS3-1824-120 60 x 120 (2-piece top) 18-18-24 12 $1,954

CF-BSS3-1824-144 60 x 144 18-18-24 24 $1,997

CF-BSS3-1824-168 60 x 168 18-18-24 36 $2,037

CF-BSS2-1818-96 48 x 96 18-18 24 $1,146

CF-BSS2-1824-96 54 x 96 18-24 18 $1,367

CF-BSS2-1824-120 60 x 120 (1-piece top) 18-24 42 $1,401




- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.

Model Number Price


Length

pricing - rectangular bases

CF-BRS4-1830-192 60 x 192 18-24-24-30 36 $2,458

CF-BRS4-1830-216 60 x 216 18-24-24-30 44 $2,618

CF-BRS4-1830-240 60 x 240 18-24-24-30 52 $2,720

CF-BRS3-1830-120 60 x 120 (2-piece top) 18-24-30 24 $1,905

CF-BRS3-1830-144 60 x 144 18-24-30 36 $1,949

CF-BRS3-1830-168 60 x 168 18-24-30 48 $1,991

CF-BRS2-1824-96 48 x 96 18-24 36 $1,118

CF-BRS2-1830-96 54 x 96 18-30 36 $1,331

CF-BRS2-1830-120 60 x 120 (1-piece top) 18-30 60 $1,367




Model Number Price


Length

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th

rectangular base placement sightline table tops


- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10"x15.5" opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.

malibu bases for sightline table tops





contents tables

laguna bases

rectangular panel square

- constructed of 1-1/8" thick material, with radiused corners- recessed kickplate is 1-1/8" high, standard finish is black - radius corners are solid wood- wood corners only available in wood or grey tones, not available in white or black- standard in TFL, HPL available at an upcharge - hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- end bases include a wire management grommet hole near top of base on trough side- middle bases include a wire management grommet hole near top of base on both sides

- 5" deep- 20" wide, 24" wide & 30" wide- 2-1/2" x 8" wire management cutout in top - 2-1/2" grommet in bottom- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"

- 12" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- rectangular, racetrack, boatshaped, bow-end and sightline tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"

- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- square, rectangular, racetrack, boatshaped, bow-end and sightline tops - minimum table size: 36" x 36"- maximum table size: 60" x 240"

offering

details





contents tables

CF-BSQR-1-18 36" Square 18 1 $753

CF-BSQR-1-20 42" Square 20 1 $881

CF-BSQR-1-24 48" Square 24 1 $931

CF-BSQR-1-30 54", 60" Square 30 1 $962

- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Square bases are hollow with 10" square openings at top and bottom for wire management. - Square bases should not be used with round tops. - Radiused wood edges not available in black or white.

pricing Model Number Price


Included




BasesIncluded

grain direction



optional kickplate colors

For silver metallic, white or matching PVC kickplate add OP-CONF-71 for $133 per base.

table tops for laguna bases

square* rectangular racetrack boatshape bow-end sightline**rectangular/square bases only*square base only

laguna base for square table topslaguna base details





contents tables

laguna panel base

Model Number Price


Length

pricing

CF-BPR4-24-168 48 x 168 24 37 1/4 $2,432

CF-BPR4-30-168 54 x 168, 60 x 168 30 37 1/4 $2,452

CF-BPR4-24-192 48 x 192 24 45 1/4 $2,469

CF-BPR4-30-192 54 x 192, 60 x 192 30 45 1/4 $2,488

CF-BPR4-24-216 48 x 216 24 53 1/4 $2,495

CF-BPR4-30-216 54 x 216, 60 x 216 30 53 1/4 $2,503

CF-BPR3-24-120 48 x 120 24 34 1/2 $1,930

CF-BPR3-24-144 48 x 144 24 46 1/2 $1,946

CF-BPR3-30-144 54 x 144, 60 x 144 30 46 1/2 $1,959

CF-BPR2-20-72 36 x 72 20 32 $1,192

CF-BPR2-20-84 42 x 84 20 38 $1,271

CF-BPR2-24-84 48 x 84 24 38 $1,301

CF-BPR2-20-96 42 x 96 20 50 $1,286

CF-BPR2-24-96 48 x 96 24 50 $1,330




CF-BPR5-24-240 48 x 240 24 44 3/4 $3,045

CF-BPR5-30-240 54 x 240, 60 x 240 30 44 3/4 $3,063


- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- 5" thick panel bases are hollow with 2.5" x 8" opening at top and a 2.5" grommet at the bottom for wire management. - To place a power/data grommet over a base, add OP-CONF-NOTCH for $347 per base.- Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.




BasesIncluded

Center of 4th Base

36 72 17-1/2 54-1/2

42/48 84 20-1/2 63-1/2

42/48 96 20-1/2 75-1/2

48 120 20-1/2 60 99-1/2

48/54/60 144 20-1/2 72 123-1/2

48/54/60 168 20-1/2 84 147-1/2

48/54/60 192 20-1/2 70-13/16 121-3/16 171-1/2

48/54/60 216 20-1/2 78-13/16 137-7/16 195-1/2

48/54/60 240 20-1/2 70-1/4 120 169-3/4 219-1/2

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base


1st2nd

3rd4th

5th

Center of 5th Base




5"

30"

2-3/4"

27-5/8"

2-1/2"

8"

dimensions

5"

24"

2-3/4"

21-5/8"

2-1/2"

8"

5"

20"

2-3/4"

17-5/8"

2-1/2"

8"

Side Elevation

3-1/2"

28-5/8"





contents tables

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th

36 72 18 54

42/48 84 24 60

42/48 96 24 72

48* 120 24 96

48** 120 24 60 96

48/54/60 144 24 72 120

48/54/60 168 24 84 144

48/54/60 192 24 72 120 168

48/54/60 216 24 80 136 192

48/54/60 240 24 88 152 216

base placement rectangular, racetrack, boatshape, bow-end and sightline table tops


laguna rectangular base




BasesIncluded

Model Number Price


Length

pricing

CF-BRR4-24-192 48 x 192 24 36 $3,797

CF-BRR4-30-192 54 x 192, 60 x 192 30 36 $3,927

CF-BRR4-24-216 48 x 216 24 44 $3,837

CF-BRR4-30-216 54 x 216, 60 x 216 30 44 $4,087

CF-BRR4-24-240 48 x 240 24 52 $3,938

CF-BRR4-30-240 54 x 240, 60 x 240 30 52 $4,189

CF-BRR3-24-120 48 x 120 (2 & 3 piece top) 24 24 $2,932

CF-BRR3-24-144 48 x 144 24 36 $2,970

CF-BRR3-30-144 54 x 144, 60 x 144 30 36 $3,088

CF-BRR3-24-168 48 x 168 24 48 $3,011

CF-BRR3-30-168 54 x 168, 60 x 168 30 48 $3,129

CF-BRR2-18-72 36 x 72 18 24 $1,637

CF-BRR2-18-84 42 x 84 18 24 $1,671

CF-BRR2-24-84 48 x 84 24 24 $1,938

CF-BRR2-18-96 42 x 96 18 36 $1,704

CF-BRR2-24-96 48 x 96 24 36 $1,970

CF-BRR2-24-120 48 x 120 (1 piece top) 24 60 $2,004




- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.




12"

30"

9-3/4"

27-5/8"

10"

15-1/2"

dimensions

Side Elevation

12"

24"

9-3/4"

21-5/8"

10"

15-1/2"

12"

18"

9-3/4"

15-5/8"

10"

15-1/2"

3-1/2"

28-5/8"





contents tables


laguna square base

36 72 21 51

42 84 27 57

42 96 27 69

48 96 30 66

48 120 30 90

48 144 30 72 114

48 168 30 84 138

48 192 30 74 118 162

48 216 30 82 134 186

48 240 30 90 150 210

54/60 144 33 72 111

54/60 168 33 84 135

54/60 192 33 75 117 159

54/60 216 33 83 133 183

54/60 240 33 91 149 207

Table Depth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th




BasesIncluded

Model Number Price


Length

pricing

CF-BQR4-24-192 48 x 192 24 20 $3,863

CF-BQR4-30-192 54 x 192, 60 x 192 30 12 $4,219

CF-BQR4-24-216 48 x 216 24 28 $4,022

CF-BQR4-30-216 54 x 216, 60 x 216 30 20 $4,378

CF-BQR4-24-240 48 x 240 24 36 $4,125

CF-BQR4-30-240 54 x 240, 60 x 240 30 28 $4,480

CF-BQR3-24-144 48 x 144 24 18 $3,021

CF-BQR3-30-144 54 x 144, 60 x 144 30 9 $3,301

CF-BQR3-24-168 48 x 168 24 30 $3,062

CF-BQR3-30-168 54 x 168, 60 x 168 30 21 $3,343

CF-BQR2-18-72 36 x 72 18 12 $1,665

CF-BQR2-18-84 42 x 84 18 12 $1,698

CF-BQR2-18-96 42 x 96 18 24 $1,731

CF-BQR2-24-96 48 x 96 24 12 $2,003

CF-BQR2-24-120 48 x 120 24 36 $2,037




- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.

3-1/2"

28-5/8"

Side Elevation

dimensions

For 36"and 42" Deep Table Tops



30"

27-3/4"

27-5/8"

10"

10"

24"

24"

21-3/4"

21-5/8"

10"

10"

18"

18"

15-3/4"

15-5/8"

10"

10"





contents tables

CF-BQS4-1824-192 60 x 192 18-18-24-24 24 $3,065

CF-BQS4-1824-216 60 x 216 18-18-24-24 32 $3,224

CF-BQS4-1824-240 60 x 240 18-18-24-24 40 $3,326

CF-BQS3-1824-120 60 x 120 (2-piece top) 18-18-24 12 $2,831

CF-BQS3-1824-144 60 x 144 18-18-24 24 $2,872

CF-BQS3-1824-168 60 x 168 18-18-24 36 $2,946

CF-BQS2-1818-96 48 x 96 18-18 24 $1,731

CF-BQS2-1824-96 54 x 96 18-24 18 $1,950

CF-BQS2-1824-120 60 x 120 (1-piece top) 18-24 42 $1,984

CF-BRL4-1830-192 60 x 192 18-24-24-30 36 $3,625

CF-BRL4-1830-216 60 x 216 18-24-24-30 44 $3,786

CF-BRL4-1830-240 60 x 240 18-24-24-30 52 $3,888

CF-BRL3-1830-120 60 x 120 (2-piece top) 18-24-30 24 $2,782

CF-BRL3-1830-144 60 x 144 18-24-30 36 $2,825

CF-BRL3-1830-168 60 x 168 18-24-30 48 $2,866

CF-BRL2-1824-96 48 x 96 18-24 36 $1,841

CF-BRL2-1830-96 54 x 96 18-30 36 $2,054

CF-BRL2-1830-120 60 x 120 (1-piece top) 18-30 60 $2,088

pricing - rectangular bases




Model Number Price


Length

pricing - square bases




Model Number Price


Length


laguna bases for sightline table tops

48 96 24 72

54 96 24 72

60 120 24 96

60 120 24 60 96

60 144 24 72 120

60 168 24 84 144

60 192 24 72 120 168

60 216 24 80 136 192

60 240 24 88 152 216

square base placement sightline table tops

48 96 27 69

54 96 27 66

60 120 27 90

60 120 27 57 90

60 144 27 69 114

60 168 27 81 138

60 192 27 69 114 162

60 216 27 77 130 186

60 240 27 85 146 210

1st2nd

3rd4th

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th

rectangular base placement sightline table tops







contents tables

torrance bases

- constructed two of 1-1/8" thick pieces with 1/8" reveal, solid construction, cannot route wires through- recessed kickplate is 3/4" high, standard finish is black - reveal is only available in black- edges are 2mm PVC- standard in TFL, HPL available at an upcharge - all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base - 2-3/8" deep- 20" wide, 24" wide & 30" wide- minimum table size: 36" x 72"- maximum table size: 60" x 240"

details

grain direction




For silver metallic, white or matching PVC kickplate, add OP-CONF-71 for $133 per base.

table tops for torrance bases

rectangular racetrack boatshape bow-end





contents tables

CF-BPS4-24-168 48 x 168 24 40 3/4 $652

CF-BPS4-30-168 54 x 168, 60 x 168 30 40 3/4 $694

CF-BPS4-24-192 48 x 192 24 48 3/4 $659

CF-BPS4-30-192 54 x 192, 60 x 192 30 48 3/4 $701

CF-BPS4-24-216 48 x 216 24 56 3/4 $666

CF-BPS4-30-216 54 x 216, 60 x 216 30 56 3/4 $706

CF-BPS3-24-120 48 x 120 24 38 1/2 $575

CF-BPS3-24-144 48 x 144 24 50 1/2 $582

CF-BPS3-30-144 54 x 144, 60 x 144 30 50 1/2 $589

CF-BPS2-20-72 36 x 72 20 37 1/4 $402

CF-BPS2-20-84 42 x 84 20 43 1/4 $408

CF-BPS2-24-84 48 x 84 24 43 1/4 $424

CF-BPS2-20-96 42 x 96 20 55 1/4 $415

CF-BPS2-24-96 48 x 96 24 55 1/4 $436




CF-BPS5-24-240 48 x 240 24 48 1/4 $768

CF-BPS5-30-240 54 x 240, 60 x 240 30 48.25 $821


- Includes 3/4" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Not available with wire access door.- Shipped in pieces and require assembly.

torrance bases

Model Number Price


Length

pricing

Center of 4th Base

36 72 16-3/16 55-13/16

42/48 84 19-3/16 64-13/16

42/48 96 19-3/16 76-13/16

48 120 19-3/16 60 100-13/16

48/54/60 144 19-3/16 72 124-13/16

48/54/60 168 19-3/16 62-3/8 105-6/8 148-13/16

48/54/60 192 19-3/16 70-3/8 121-5/8 172-13/16

48/54/60 216 19-3/16 78-3/8 137-5/8 196-13/16

48/54/60 240 19-3/16 69-5/8 120 170-7/16 220-13/16

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base


Center of 5th Base

1st2nd

3rd4th

5th




dimensions

2-3/8"

20"

Side Elevation

3-1/2"

28-5/8"13-1/2"

2-3/8"

24" 13-1/2"

2-3/8"

30"13-1/2"





contents tables

imperial bases

- constructed two of 1-1/8" thick pieces with 1/8" reveal- recessed kickplate is 3/4" high, standard finish is black - reveal is only available in black- edges are 2mm PVC- standard in TFL, HPL available at an upcharge - all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base - hollow construction allows wires to pass through- 5" x 9" wire management cutout in top and bottom- 9" deep- 20" wide, 24" wide & 30" wide- minimum table size: 36" x 72"- maximum table size: 60" x 240"

details

grain direction





table tops for imperial bases






contents tables

CF-BBT4-24-192 48 x 192 24 40 $3,536

CF-BBT4-30-192 54 x 192, 60 x 192 30 40 $3,900

CF-BBT4-24-216 48 x 216 24 48 $3,574

CF-BBT4-30-216 54 x 216, 60 x 216 30 48 $4,059

CF-BBT4-24-240 48 x 240 24 56 $3,676

CF-BBT4-30-240 54 x 240, 60 x 240 30 56 $4,162

CF-BBT3-24-120 48 x 120 24 28 1/2 $2,766

CF-BBT3-24-144 48 x 144 24 40 1/2 $2,807

CF-BBT3-30-144 54 x 144, 60 x 144 30 40 1/2 $3,095

CF-BBT3-24-168 48 x 168 24 52 1/2 $2,848

CF-BBT3-30-168 54 x 168, 60 x 168 30 52 1/2 $3,137

CF-BBT2-20-72 36 x 72 20 30 $1,670

CF-BBT2-20-84 42 x 84 20 30 $1,705

CF-BBT2-24-84 48 x 84 24 30 $1,828

CF-BBT2-20-96 42 x 96 20 42 $1,737

CF-BBT2-24-96 48 x 96 24 42 $1,860




- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Boatshaped bases are hollow with 5" x 9" opening at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.



optional wire access door Model Number PriceBases

Included

Model Number Price


Length

pricing

imperial bases

36 72 16-1/2 55-1/2

42/48 84 22-1/2 61-1/2

42/48 96 22-1/2 73-1/2

48 120 22-1/2 60 97-1/2

48/54/60 144 22-1/2 72 121-1/2

48/54/60 168 22-1/2 84 145-1/2

48/54/60 192 22-1/2 71-1/2 120-1/2 169-1/2

48/54/60 216 22-1/2 79-1/2 136-1/2 193-1/2

48/54/60 240 22-1/2 87-1/2 152-1/2 217-1/2


1st2nd

3rd4th

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base




dimensions

Side Elevation

3-1/2"

28-5/8"

5"

30"

4-1/4"

29"

8"

9"

9"

5"

24"

4-1/4"

23"

8"

9"

9"

5"

18"

4-1/4"

17"

8"

9"

9"





contents tables

komo bases

- constructed HPL wrapped hollow cylinder- recessed kickplate is 1-1/8" high, standard finish is black - reveal is only available in black- standard in HPL, TFL is not available - hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base

details

half cylindercylinder

- 18" diameter, 24" diameter & 30" diameter- 10" diameter wire management cutout in top and bottom- round, rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 36" x 72"- maximum table size: 60" x 240" or 60" diameter round

- depth varies- 18" wide, 24" wide & 30" wide- wire management cutout in top and bottom- rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 42" x 84"- maximum table size: 60" x 168"

offering





contents tables

CF-BCYL-1-18 36", 42" Round 18 1 $524

CF-BCYL-1-24 42", 48" or 54" Round 24 1 $746

CF-BCYL-1-30 54" or 60" Round 30 1 $870

- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Cylinder bases are hollow with 10" diameter openings at top and bottom for wire management. - 42" round top on 18" cylinder base and 54" round top on 24" cylinder base will require additional weight (50 pounds minimum) inside the base for stability and to prevent tipping. Sand bags NOT provided. - Cylinder bases should not be used with square tops. - Not all standard TFL finishes are available in matching HPL, see page 4 for availability.

komo base for round table tops

Model Number Price


Included

pricing




Included





grain direction

table tops for komo bases

rectangular racetrack boatshape bow-endround

komo base details





contents tables

CF-BCY3-24-144 48 x 144 24 18 $2,382

CF-BCY3-30-144 54 x 144, 60 x 144 30 9 $2,725

CF-BCY3-24-168 48 x 168 24 30 $2,423

CF-BCY3-30-168 54 x 168, 60 x 168 30 21 $2,765

CF-BCY4-24-192 48 x 192 24 42 $2,463

CF-BCY4-30-192 54 x 192, 60 x 192 30 33 $2,806

36 72 21 51

42 84 27 57

42 96 27 69

48 96 30 66

48 120 30 90

48 144 30 72 114

48 168 30 84 138

48 192 30 96 162

48 216 30 82 134 186

48 240 30 90 150 210

54/60 144 33 72 111

54/60 168 33 84 135

54/60 192 33 96 159

54/60 216 33 83 133 183

54/60 240 33 91 149 207

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

1st2nd

3rd4th


18-1/2"

18"


24-5/8"

24-1/8"


30-3/4"

30-1/4"

Model Number Price


Length

pricing

komo cylinder base

dimensions


CF-BCY4-24-216 48 x 216 24 28 $3,347

CF-BCY4-30-216 54 x 216, 60 x 216 30 20 $3,942

CF-BCY4-24-240 48 x 240 24 36 $3,449

CF-BCY4-30-240 54 x 240, 60 x 240 30 28 $4,045

CF-BCY2-18-72 36 x 72 18 12 $1,198

CF-BCY2-18-84 42 x 84 18 12 $1,233

CF-BCY2-18-96 42 x 96 18 24 $1,265

CF-BCY2-24-96 48 x 96 24 12 $1,387

CF-BCY2-24-120 48 x 120 24 36 $1,422




- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Cylinder bases are hollow with 10" diameter openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.




Included

10"

10"

10"

Side Elevation

3-1/2"

28-5/8"





contents tables

Side Elevation

3-1/2"

28-5/8"

48" Deep Table Tops

24-3/8"

11"

12-1/4"

23-1/4"


30"

13-3/4"

15"

29"

42 84 19 65

42 96 19 77

48 96 24 72

1st2nd

CF-BHC2-20-84 42 x 84 20 36 $1,233

CF-BHC2-20-96 42 x 96 20 48 $1,265

CF-BHC2-24-96 48 x 96 24 36 $1,384


- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Half-cylinder bases are hollow with openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.

Model Number Price


Length

pricing

komo half cylinder base

dimensions





BasesIncluded

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

CF-BCC3-24-120 48 x 120 24 18 $1,904

CF-BCC3-24-144 48 x 144 24 30 $2,250

CF-BCC3-30-144 54 x 144, 60 x 144 30 24 $2,556

CF-BCC3-24-168 48 x 168 24 42 $2,291

CF-BCC3-30-168 54 x 168, 60 x 168 30 36 $2,597


- Tables over 168" long require full cylinder bases.- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Bases are hollow with openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.

Model Number Price


Length

pricing

48 120 24 60 96

48 144 24 72 120

48 168 24 84 144

54/60 144 25-1/2 72 118-1/2

54/60 168 25-1/2 84 142-1/2

1st2nd

3rd

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

42" Deep Table Tops

20-3/8"

9"

10-1/4"

19-1/4"

6-1/2"

14-1/4"

8-1/4"

18-1/4"24"

11-1/4"





contents tables

hermosa bases

- constructed two of 1-1/8" thick pieces - edges are 2mm PVC- standard in TFL, HPL available at an upcharge - solid construction, cannot route wires through- Includes levelers- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- minimum table size: 30" x 30"- maximum table size: 60" x 60"

details orientation for mounting laminate x-bases on square table tops

table tops for hermosa bases

squareround

CF-BLMX-18 30" 18 1 $191

CF-BLMX-24 36", 42", 48" 24 1 $222

CF-BLMX-30 54" & 60" 30 1 $347

- Includes leveling glides.- Not available with wire access door.

Model Number Price


Included

pricing

top plate for mounting

grain direction


18"

For 36", 42" and 48" Deep Table Tops

24" 24"18"


30" 30"

dimensions

Side Elevation

28-5/8"





contents tables

36 72 16-1/4 55-3/4

42/48 84 19-1/4 64-3/4

42/48 96 19-1/4 79-3/4

48 120 19-1/4 60 100-3/4

48/54/60 144 19-1/4 72 124-3/4

48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4

48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4

48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4

48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4

surfside bases

- Metal open frame support legs are sold as sets with spanning rods. - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Includes leveling glides. Levelers will add 3/4" in height.- Metal open frame support legs are sold as sets with spanning rods. - 19" wide, 24" wide, 30" wide & 36" wide- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"; maximum table size: 60" x 240"

2-1/2"


18-3/4"


2-1/2"

23-3/4"


2-1/2"

29-3/4"


2-1/2"

35-3/4"

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

Center of 5th Base

1st2nd

3rd4th

5th


details

dimensions

premium - 10% upcharge (OP-COLOR)

silver black white

standard

finishes

28-3/4"

Side Elevation

table tops for surfside bases


raw steel





contents tables

36 72 16-1/4 55-3/4

42/48 84 19-1/4 64-3/4

42/48 96 19-1/4 79-3/4

48 120 19-1/4 60 100-3/4

48/54/60 144 19-1/4 72 124-3/4

48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4

48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4

48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4

48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

Center of 5th Base


1st2nd

3rd4th

5th

dimensions

5"

11-7/8"

12"

wire management basessurfside and sunset series

- include metal mounting brackets and adjustable glides.- hinged access doors both sides.- edges are standard 2MM PVC edgebanding.- rolled stainless steel can be added to the doors, edges with rolled steel finish are 2MM PVC.- laminate wire-management bases are not available with kickplate.

details

5"

5"

12"

21-1/4" 12"

For 36", 42" and 48" Deep Table Tops


SY-WMBT-0836 8 36 2 $104

SY-WMBT-0842 8 42 2 $109

SY-WMBT-0848 8 48 2 $138

SY-WMBT-0860 8 60 2 $153

SY-WMBT-0872 8 72 2 $160

- Includes mounting brackets.- Chrome finish only.

Model Number PriceWidth Length Height

wire management baskets

28-7/16"

Side Elevation

22-1/2"

grain direction





contents tables

CF-OLGW-24-216 48 x 216 24 43 3/4 $4,153

CF-OLGW-30-216 54 x 216 30 43 3/4 $4,176

CF-OLGW-36-216 60 x 216 36 43 3/4 $4,187

CF-OLGW-24-240 48 x 240 24 49 3/4 $4,244

CF-OLGW-30-240 54 x 240 30 49 3/4 $4,267

CF-OLGW-36-240 60 x 240 36 49 3/4 $4,279

CF-OLGW-24-168 48 x 168 24 43 $3,079

CF-OLGW-30-168 54 x 168 30 43 $3,102

CF-OLGW-36-168 60 x 168 36 43 $3,114

CF-OLGW-24-192 48 x 192 24 50 1/4 $3,169

CF-OLGW-30-192 54 x 192 30 50 1/4 $3,192

CF-OLGW-36-192 60 x 192 36 50 1/4 $3,203

CF-OLGW-19-72 36 x 72 19 18 1/2 $1,855

CF-OLGW-19-84 42 x 84 19 21 1/2 $1,898

CF-OLGW-24-84 48 x 84 24 21 1/2 $1,910

CF-OLGW-19-96 42 x 96 19 27 1/2 $1,919

CF-OLGW-24-96 48 x 96 24 27 1/2 $1,930

CF-OLGW-24-120 48 x 120 24 39 1/2 $2,061

CF-OLGW-24-144 48 x 144 24 51 1/2 $2,103

CF-OLGW-30-144 54 x 144 30 51 1/2 $2,126

CF-OLGW-36-144 60 x 144 36 51 1/2 $2,137

CF-OLG1-24-216 48 x 216 24 41 3/4 $3,004

CF-OLG1-30-216 54 x 216 30 41 3/4 $3,061

CF-OLG1-36-216 60 x 216 36 41 3/4 $3,090

CF-OLG1-24-240 48 x 240 24 47 3/4 $3,095

CF-OLG1-30-240 54 x 240 30 47 3/4 $3,153

CF-OLG1-36-240 60 x 240 36 47 3/4 $3,182

CF-OLG1-24-168 48 x 168 24 40 3/4 $2,314

CF-OLG1-30-168 54 x 168 30 40 3/4 $2,359

CF-OLG1-36-168 60 x 168 36 40 3/4 $2,383

CF-OLG1-24-192 48 x 192 24 48 3/4 $2,403

CF-OLG1-30-192 54 x 192 30 48 3/4 $2,449

CF-OLG1-36-192 60 x 192 36 48 3/4 $2,471

CF-OLG1-24-120 48 x 120 24 38 1/4 $1,679

CF-OLG1-24-144 48 x 144 24 50 1/4 $1,720

CF-OLG1-30-144 54 x 144 30 50 1/4 $1,754

CF-OLG1-36-144 60 x 144 36 50 1/4 $1,772

CF-OLG1-19-72 36 x 72 19 37 $944

CF-OLG1-19-84 42 x 84 19 43 $989

CF-OLG1-24-84 48 x 84 24 43 $999

CF-OLG1-19-96 42 x 96 19 55 $1,009

CF-OLG1-24-96 48 x 96 24 55 $1,020

2 Bases & 2 Spanning Rods




- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional colors or chrome finish, please contact Customer Service for upcharge.




- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional metal colors or chrome finish, please contact Customer Service for upcharge. - Wire management bases include metal mounting brackets and adjustable glides.- Wire management bases include hinged access doors both sides.- Edges of wire management bases are DeskMakers standard 2MM PVC edgebanding.- For rolled stainless steel to the doors only, add AC-OPTN-BOX-STL for $519. Edges with rolled steel finish are 2MM PVC.- Laminate wire-management bases are not available with kickplate.

Model Number Price

Table Top Size Base Size Spanning Rod

Length

pricing

surfside bases surfside with wire management base

Model Number Price


Length

pricing





contents tables

sunset bases

2-1/2"


18-3/4"




28-5/8"

2-1/2"

23-3/4"33-5/8"

2-1/2"

29-3/4"39-5/8"

2-1/2"

35-3/4"45-5/8"

36 72 16-1/4 55-3/4

42/48 84 19-1/4 64-3/4

42/48 96 19-1/4 79-3/4

48 120 19-1/4 60 100-3/4

48/54/60 144 19-1/4 72 124-3/4

48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4

48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4

48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4

48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

Center of 5th Base

1st2nd

3rd4th

5th


dimensions

raw steel

- Metal A-rame support legs are sold as sets with spanning rods. - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Includes leveling glides. Levelers will add 3/4" in height.- Metal open frame support legs are sold as sets with spanning rods. - 19" wide, 24" wide, 30" wide & 36" wide- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"; maximum table size: 60" x 240"


details

silver black white

standard

finishes

28-7/16"

Side Elevation

table tops for sunset bases






contents tables

CF-ALGW-34-216 48 x 216 24/34 43 3/4 $4,102

CF-ALGW-40-216 54 x 216 30/40 43 3/4 $4,125

CF-ALGW-46-216 60 x 216 36/46 43 3/4 $4,136

CF-ALGW-34-240 48 x 240 24/34 49 3/4 $4,194

CF-ALGW-40-240 54 x 240 30/40 49 3/4 $4,217

CF-ALGW-46-240 60 x 240 36/46 49 3/4 $4,229

CF-ALGW-34-168 48 x 168 24/34 43 $3,030

CF-ALGW-40-168 54 x 168 30/40 43 $3,052

CF-ALGW-46-168 60 x 168 36/46 43 $3,064

CF-ALGW-34-192 48 x 192 24/34 50 1/4 $3,119

CF-ALGW-40-192 54 x 192 30/40 50 1/4 $3,142

CF-ALGW-46-192 60 x 192 36/46 50 1/4 $3,153

CF-ALGW-29-72 36 x 72 19/29 18 1/2 $1,804

CF-ALGW-29-84 42 x 84 19/29 21 1/2 $1,848

CF-ALGW-34-84 48 x 84 24/34 21 1/2 $1,860

CF-ALGW-29-96 42 x 96 19/29 27 1/2 $1,869

CF-ALGW-34-96 48 x 96 24/34 27 1/2 $1,880

CF-ALGW-34-120 48 x 120 24/34 39 1/2 $2,011

CF-ALGW-34-144 48 x 144 24/34 51 1/2 $2,052

CF-ALGW-40-144 54 x 144 30/40 51 1/2 $2,075

CF-ALGW-46-144 60 x 144 36/46 51 1/2 $2,086

CF-ALG1-34-216 48 x 216 24/34 41 3/4 $2,954

CF-ALG1-40-216 54 x 216 30/40 41 3/4 $3,011

CF-ALG1-46-216 60 x 216 36/46 41 3/4 $3,039

CF-ALG1-34-240 48 x 240 24/34 47 3/4 $3,045

CF-ALG1-40-240 54 x 240 30/40 47 3/4 $3,102

CF-ALG1-46-240 60 x 240 36/46 47 3/4 $3,131

CF-ALG1-34-168 48 x 168 24/34 40 3/4 $2,263

CF-ALG1-40-168 54 x 168 30/40 40 3/4 $2,309

CF-ALG1-46-168 60 x 168 36/46 40 3/4 $2,332

CF-ALG1-34-192 48 x 192 24/34 48 3/4 $2,352

CF-ALG1-40-192 54 x 192 30/40 48 3/4 $2,398

CF-ALG1-46-192 60 x 192 36/46 48 3/4 $2,421

CF-ALG1-34-120 48 x 120 24/34 38 1/4 $1,628

CF-ALG1-34-144 48 x 144 24/34 50 1/4 $1,669

CF-ALG1-40-144 54 x 144 30/40 50 1/4 $1,704

CF-ALG1-46-144 60 x 144 36/46 50 1/4 $1,721

CF-ALG1-29-72 36 x 72 19/29 37 $894

CF-ALG1-29-84 42 x 84 19/29 43 $938

CF-ALG1-34-84 48 x 84 24/34 43 $950

CF-ALG1-29-96 42 x 96 19/29 55 $959

CF-ALG1-34-96 48 x 96 24/34 55 $970








Model Number Price


Length

pricing

sunset bases sunset with wire management base

Model Number Price


Length

pricing

- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional colors or chrome finish, please contact Customer Service for upcharge.

- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional metal colors or chrome finish, please contact Customer Service for upcharge. - Wire management bases include metal mounting brackets and adjustable glides.- Wire management bases include hinged access doors both sides.- Edges of wire management bases are DeskMakers standard 2MM PVC edgebanding.- For rolled stainless steel to the doors only, add AC-OPTN-BOX-STL for $519. Edges with rolled steel finish are 2MM PVC.- Laminate wire-management bases are not available with kickplate.





contents tables

- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.

pricing

CF-RDDK-01-20-??? 30" or 36" round or 30" square 27 3/4 20 1 $647

CF-RDDK-01-24-??? 42" round or 36" square 27 3/4 24 1 $686


Desk Height




Standing Height

beacon base

- tables tops are sold separately- 3" diameter column on 20" base, 4" diameter column on 24" and 32"- glides have 1/8" adjustability and raise the base 1/4" above the floor- top and bottom plates are bolted to column, field assembly required- powdercoat finish- available in occasional, desk and standing heights

details

dimensions

27-3/4"

Desk Height

40-3/4"

Standing Height

details

table tops for use with beacon bases

Maximum 48" Round Table Top

Maximum 48" x 96" one piece Table Top

silver black white

finishes

Model Number

Table Top Size Base Size Bases

Included PriceBase Height

12"

12"32"

32"

12"

12"24"

24"

10"

10"20"

20"

For 48" Round or 42" Square Table Tops


For 30" and 36" Round or 30" Square Table Tops





contents tables

beacon power base

- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- 3" diameter column on 20" base, 4" diameter column on 24" and 32"- top plate allows for centered power grommet- glides have 1/8" adjustability and raise the base 1/4" above the floor- top and bottom plates are bolted to column, field assembly required- powdercoat finish- available in occasional, desk and standing heights

detailsdetails




silver black white

finishes 2-13/16"

6-5/8"

dimensions

27-3/4"

Desk Height

40-3/4"

Standing Height

compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND - AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03


pricing

CF-RDDK-EL01-20-??? 30" or 36" round or 30" square 27 3/4 20 1 $843

CF-RDDK-EL01-24-??? 42" round or 36" square 27 3/4 24 1 $882

CF-RDDK-EL01-28-??? 48" round or 42" square 27 3/4 32 1 $1,012

Desk Height

CF-RDDK-EL05-20-??? 30" or 36" round or 30" square 40 3/4 20 1 $931

CF-RDDK-EL05-24-??? 42" round or 36" square 40 3/4 24 1 $970

CF-RDDK-EL05-28-??? 48" round or 42" square 40 3/4 32 1 $1,100

Standing Height

Model Number



12"

12"32"

32"

12"

12"24"

24"

12"

12"20"

20"








contents tables

mission base

details


12"

12"26"

dimensions

27-3/4"

table tops for use with mission bases



Maximum 42" Square Table Top

silver black white

finishes

Desk Height

40-3/4"

Standing Height

26"

12"

12"20"

20"

10"

10"16"

16"




pricing

CF-SQDK-01-16-??? 30" or 36" round or 30" square 27 3/4 16 1 $647

CF-SQDK-01-20-??? 42" round or 36" square 27 3/4 20 1 $686


Desk Height




Standing Height

Model Number



- tables tops are sold separately- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights





contents tables

mission power base

detailsdetails


silver black white

finishes2-13/16"

6-5/8"

dimensions

27-3/4"

Desk Height

40-3/4"

Standing Height

compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND - AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03


pricing

CF-SQDK-EL01-16-??? 30" or 36" round or 30" square 27 3/4 16 1 $843

CF-SQDK-EL01-20-??? 42" round or 36" square 27 3/4 20 1 $882

CF-SQDK-EL01-26-??? 48" round or 42" square 27 3/4 26 1 $1,012

Desk Height

CF-SQDK-EL05-16-??? 30" or 36" round or 30" square 40 3/4 16 1 $931

CF-SQDK-EL05-20-??? 42" round or 36" square 40 3/4 20 1 $970

CF-SQDK-EL05-26-??? 48" round or 42" square 40 3/4 26 1 $1,100

Standing Height

Model Number







12"

12"26"

26"

12"

12"20"

20"

10"

10"16"

16"



- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- top plate allows for centered power grommet- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights





contents tables

CF-BMMX-05-24-??? 24 & 30" round & square 40 3/4 26 1 $468 $534

CF-BMMX-05-30-??? 36" & 42" round & square 40 3/4 32 1 $521 $587

CF-BMMX-05-60-??? 48" round & square; 54" & 60" round 40 3/4 38 1 $568 $634

newport base

details- 3" diameter column and feet are 1-7/8" diameter- fully welded construction of top plate to column- x-base is bolted to column, field assembly required- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights

orientation for mounting x-bases on square table tops

27-3/4"

For 48" Round/Square and 54" & 60" Round Table Tops

12"

12"38"





silver black white

finishes

dimensions

For 36" and 42" Table Tops

pricing Model Number Black


Included Silver/WhiteBase Height

Desk Height

38"


12"

12"32"

32"

12"

12"26"

26"

40-3/4"

Desk Height Standing Height

Standing Height

table tops for newport x-bases

squareround





contents tables

cabrillo base

details


- 3" diameter column and feet are 1-1/2" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights

12"

12"38"

For 48" and 54" Round and 42" Square Table Tops

CF-ARTB-05-??? 36" or 42" round; 36" square 40 3/4 32 1 $556 $623





pricing

Model Number Black



Desk Height

Standing Height

dimensions

27-3/4"

pricing

40-3/4"


38"

12"

12"32"


32"

silver black white

finishes

table tops for cabrillo bases

squareround





contents tables

venice bases

power grommet x-basex-base 4 post x-base

- 2-1/4" column- 27-3/4" high and 40-3/4" without table top- maximum table size: 54" diameter or 42" square

- 2-1/4" column- 27-3/4" high without table top- maximum table size: 54" diameter or 42" square - top plate allows for centered power grommet

- (4) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" diameter or 54" square

offering

extended y-basey-base double t-base

- 2-1/4" column- 27-3/4" high without table top- maximum table size: 48" x 96"- metal stretcher included

- (2) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" x 240"- metal stretchers included

- (2) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" x 240"

silver black white

polished chrome

standard - powdercoat

premium

finishes

details- 2-1/4" diameter steel column and feet are cast aluminum- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel

brushed chrome

Cast aluminum feet are and aluminum hortizontal stretchers are polished/brushed aluminum. Steel columns are chrome/brushed finish.

Premium finishes can have a multifinish look combining powdercoat columns or feet with polished/brushed column or feet.





contents tables

ML-PRPL-05-26-??? 30" & 36" round; or 30" square 40 3/4 26 1 $667 $726

ML-PRPL-05-33-??? 42" round; or 36" square 40 3/4 32 3/4 1 $693 $752

ML-PRPL-05-38-??? 48" & 54" round; or 42" square 40 3/4 38 1/4 1 $783 $846




venice x-base

details- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel - available in occasional, desk and standing heights

- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.

12"

12"38-1/4"


27-3/4"

Desk Height

38-1/4"

For 42" Round and 36" Square Table Tops

12"

12"32-3/4"

32-3/4"

12"

12"26"

26"


dimensions

pricing Model Number Standard


Included PremiumBase Height

40-3/4"

Standing Heightorientation for mounting x-bases on square table tops

table tops for venice x-bases

squareround

silver black white

finishesstandard - powdercoat

premium

polished chrome

brushed chrome

Desk Height

Standing Height





contents tables

dimensions

details

pricing - desk height

ML-PRPL-EL01-26-??? 30" & 36" round; or 30" square 27 3/4 26 1 $908 $967

ML-PRPL-EL01-33-??? 42" round; or 36" square 27 3/4 32 3/4 1 $934 $993

ML-PRPL-EL01-38-??? 48" & 54" round; or 42" square 27 3/4 38 1/4 1 $1,024 $1,087


Model Number Standard



12"

12"38-1/4"


27-3/4"

Desk Height

38-1/4"


12"

12"32-3/4"

32-3/4"

12"

12"26"

26"


wire management

venice power x-base

- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - welded cone top plate allows for centered power grommet- grommet access hole above feet, includes plastic grommet cover- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel

silver black white


premium

polished chrome

brushed chrome



squareround

2-3/4"

10-1/4"

3-1/8"

compliant electrical units - AC-ELCV-1RND - AC-ELCV-2RND - AC-ELCV-01, AC-ELCV-02, AC-ELCV-06, AC-ELCV-07- AC-ELCV-MINI- AC-PWRG-02- AC-PWRG-03





contents tables

ML-PRPL-04-38-??? 60" round; or 48" square 27 3/4 38 1 $1,260 $1,541

ML-PRPL-04-46-??? 54" square 27 3/4 46 1 $1,300 $1,581

venice 4 post x-base

5"

5"32-5/8"


27-3/4"

Desk Height

32-5/8"

dimensions

pricing





46"

5"

5"28"


28"38"

details- (4) 2-1/4" steel columns and feet are cast aluminum- maximum table size: 60" diameter or 54" square - 27-3/4" high without table top- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel

silver black white


premium

polished chrome

brushed chrome

table tops for venice 4 post x-bases

squareround





contents tables

venice y-base

details

- 2-1/4" steel column and feet are cast aluminum- 27-3/4" high without table top- maximum table size: 48" x 96"- metal stretcher included

dimensions

table tops for venice y-bases


y-base

double y-base

silver black white


premium

polished chrome

brushed chrome

y-base

- (2) 2-1/4" steel columns and feet are cast aluminum- middle legs are double t-legs- 27-3/4" high without table top- maximum table size: 60" x 240"- metal stretchers included

double y-base

- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel - horizontal aluminum stretchers required

27-3/4"

Desk HeightFor 42" and 48" Deep Table Tops

12"

12"33-3/8"

16"


9-1/2"

9-1/2"28-5/8"

12-1/2"

y-base

double y-base

6"

8"

41-1/2"

16-3/4"



6"

8"

6"

8"

37-5/8"

14-3/4"

6"

8" 27-3/4"





contents tables

ML-YLG1-29-72-??? 36 x 72 28 5/8 33 7/8 $1,356 $1,555

ML-YLG1-33-84-??? 42 x 84, 48 x 84 33 3/8 46 1/2 $1,508 $1,725

ML-YLG1-33-96-??? 42 x 96, 48 x 96 33 3/8 58 1/2 $1,541 $1,765 - Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.

ML-YLG2-33-84-??? 42 x 84, 48 x 84 32 7/8 46 1/2 $2,132 $2,548

ML-YLG2-33-96-??? 42 x 96, 48 x 96 32 7/8 58 1/2 $2,199 $2,627

ML-YLG2-33-240-??? 48 x 240 32 7/8 50 1/2 & 46 1/2 $5,913 $7,237

ML-YLG2-41-240-??? 54 x 240, 60 x 240 41 1/2 50 1/2 & 46 1/2 $6,059 $7,383

ML-YLG2-33-168-??? 48 x 168 32 7/8 40 1/2 $4,566 $5,494

ML-YLG2-41-168-??? 54 x 168, 60 x 168 41 1/2 40 1/2 $4,686 $5,614

ML-YLG2-33-192-??? 48 x 192 32 7/8 50 1/2 $4,653 $5,674

ML-YLG2-41-192-??? 54 x 192, 60 x 192 41 1/2 50 1/2 $4,774 $5,795

ML-YLG2-33-216-??? 48 x 216 32 7/8 58 1/2 $4,853 $5,911

ML-YLG2-41-216-??? 54 x 216, 60 x 216 41 1/2 58 1/2 $4,973 $6,032

ML-YLG2-33-120-??? 48 x 120 32 7/8 40 1/2 $3,334 $3,990

ML-YLG2-33-144-??? 48 x 144 32 7/8 52 1/2 $3,526 $4,269

ML-YLG2-41-144-??? 54 x 144, 60 x 144 41 1/2 52 1/2 $3,621 $4,365




pricing - double y bases


Table Top Size Base Size Stretcher

Length Premium



venice y-bases

1st2nd

3rd4th

5th


pricing - y bases


Table Top Size Base Size Stretcher

Length Premium

optional wiremanagement

Optional wire management grommets can be specified in the vertical columns on all Venice bases. When option is specified, an oval cutout, 1-1/4" x 2-1/4", is included in the column below the top plate and above the feet connection. Plastic grommet covers are included to cover the cutouts. OP-GROM-PRPL for $40 per leg.

36 72 18-3/16 53-3/16

42/48 84 17-7/8 66-1/8

42/48 96 17-7/8 78-1/8

48 120 17-3/4 60 102-1/4

48/54/60 144 17-3/4 72 126-1/4

48/54/60 168 19-1/8 61-7/16 103-11/16 146-1/16

48/54/60 192 17-9/16 69-7/8 122-1/8 174-7/16

48/54/60 216 17-9/16 77-7/8 138-1/8 198-7/16

48/54/60 240 19-7/16 71-3/4 120 168-1/4 220-9/16

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

Center of 5th Base





contents tables

t-leg

venice t-legs

dimensions

ML-PRPL-TT34-??? 48" 27 3/4 34 1 $616 $725

ML-PRPL-TT40-??? 54", 60" 27 3/4 40 1 $640 $749


1st2nd

3rd4th

5th


ML-PRPL-T33-??? 36" 27 3/4 32 3/4 1 $382 $435

ML-PRPL-T38-??? 42" 27 3/4 38 1/4 1 $443 $496

pricing


Table Top Width Base Size Bases


Single T-Leg

Double T-Leg

double t-leg

details

6"

8"

40"



6"

8"27-3/4"

6"

8"

34" 6"

8"

27-3/4"

8"

32-3/4" 8"

Desk HeightFor 42" Deep Table TopsFor 36" Deep Table Tops

6"

26" 8"

t-leg

double t-leg

- 2-1/4" steel column and feet are cast aluminum- maximum table size: 42" x 96"

t-leg

- (2) 2-1/4" steel columns and feet are cast aluminum- maximum table size: 60" x 240"

double t-leg

- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel

36 72 18 54

42/48 84 19-1/8 64-7/8

42/48 96 19-1/8 76-7/8

48 120 19-1/8 60 100-7/8

48/54/60 144 19-1/8 72 124-7/8

48/54/60 168 19-1/8 62-3/8 105-5/8 148-7/8

48/54/60 192 19-1/8 70-3/8 121-5/8 172-7/8

48/54/60 216 19-1/8 63-9/16 108 152-7/16 196-7/8

48/54/60 240 19-1/8 69-9/16 120 170-7/16 220-7/8

TableDepth

TableLength

Center of 1st Base

Center of 2nd Base

Center of 3rd Base

Center of 4th Base

Center of 5th Base





contents tables

torrey leg

details

orientation for mounting torrey legs

- built-in wire management through the leg- heavy gauge steel construction- powdercoat finish- made in america- available in occasional, desk and standing heights

barn red blood orange sunset

heather gray midnight fresh snow

standard

finishes

asphalt

lemon yellow moss hunter denim deep ocean


wire management

table tops for torrey legs

rectangular racetrack boatshape bow-endround square

one piece table tops only, maximum width 48"





contents tables

dimensions

ML-TRAP-42-?? 48"X120" 40 3/4 4 3/4 1 $243 $267

ML-TRAP-29-?? 48"X120" 27 3/4 4 1/4 1 $221 $243

- Includes leveling glides.- To order, replace "??" with MN for Midnight, HG for Heather Grey, FS for Fresh Snow, AS for Asphalt, BR for Barn Red, BO for Blodd Orange, SN for Sunset, LY for Lemon Yellow, DM for Denim, DO for Deep Ocean, HU for Hunter and MO for Moss.

pricing


MAX Table Top Size Base Size Legs


Desk Height

Standing Height


Maximum 48" x 120" one piece Table Top*additional stiffeners required

Minimum 30" Square Table Top


Minimum 36" Round Table Top

11"

9-13/16"11-13/16"

27-3/4"

2-1/2" 4-1/4"

11"

9-13/16"15-9/16"

40-3/4"

3-1/8" 4-3/4"

torrey leg details

minimum and maximum table sizes


Maximum 48" x 120" one piece Table Top*additional stiffeners required




desk height

standing height

Side View

stiffener bars

requires (2) 30" long stiffener barsAC-RDER-30 for $62 each

36" x 72"


42" x 84"


42" x 96"


48" x 96"


48" x 120" (one piece tops only)

Rectangular table tops with Torrey legs require external stiffeners. Stiffeners may interfer with mounting of some electrical grommets. Ship separately and are field installed. Placement allows for 7" of clear space between stiffener bars in center of the table for electrical gommet placement.

desk height standing height

Cover Panel View

Top View Top View

Side View Cover Panel View



123deskmakers.com


Cafe cafetable of contents Cafe Table Tops 124-127Beacon 128-129Mission 130-131Newport 132-133Cabrillo 134-135Venice 136-137Topanga 138-139




contents tables

TP-SQRE-1919-??-?? 19 19 $328 $760 $998 $772 $1,074

TP-SQRE-2424-??-?? 24 24 $399 $848 $1,148 $940 $1,267

TP-SQRE-3030-??-?? 30 30 $575 $1,004 $1,474 $1,340 $2,114

TP-SQRE-3636-??-?? 36 36 $694 $1,194 $1,871 $1,611 $2,325

TP-SQRE-4242-??-?? 42 42 $913 $1,420 $2,341 $2,030 $2,930

TP-SQRE-4848-??-?? 48 48 NA $1,679 $2,883 $2,557 $3,692

TP-SQRE-5454-??-?? 54 54 NA $2,448 $3,973 $3,223 $4,652

TP-FULR-3030-??-?? 30 30 $509 NA NA NA NA

TP-FULR-3636-??-?? 36 36 $694 NA NA NA NA

TP-FULR-4242-??-?? 42 42 $913 NA NA NA NA

TP-FULR-4848-??-?? 48 48 NA NA NA NA NA





BL-L1 BB-L1 PL-L1 PW-L13D-J1


TP-FULR-3030-??-?? 30 30 $395 $435 $592 $685 $750

TP-FULR-3636-??-?? 36 36 $401 $441 $602 $855 $914

TP-FULR-4242-??-?? 42 42 $503 $553 $754 $885 $932

TP-FULR-4848-??-?? 48 48 $610 $671 $915 $1,018 $1,054

TP-FULR-5454-??-?? 54 54 $727 $800 $1,090 $1,265 $1,346

TP-FULR-6060-??-?? 60 60 $764 $841 $1,147 $1,295 $1,363



2mm PVC 2mm PVC 2mm PVC

TFL

T1-A1

2mm PVC Knife Exposed Plywood

1-1/8" ThickPremium TFL

HPL1-1/8" Thick

Standard HPL1-1/8" Thick

MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1

- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.

round table top TFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square

3DL Butcher Block Planked Wood





TP-SQRE-1919-??-?? 19 19 $139 $154 $209 $336 $418

TP-SQRE-2424-??-?? 24 24 $268 $295 $402 $445 $575

TP-SQRE-3030-??-?? 30 30 $347 $382 $521 $567 $645

TP-SQRE-3636-??-?? 36 36 $361 $397 $542 $696 $855

TP-SQRE-4242-??-?? 42 42 $463 $510 $695 $712 $968

TP-SQRE-4848-??-?? 48 48 $571 $628 $857 $936 $1,071

TP-SQRE-5454-??-?? 54 54 $679 $747 $1,019 $1,226 $1,265




TFL

T1-A1



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1


square table top TFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square






contents tables

TP-RECT-3036-??-?? 30 36 $228 $251 $342 $447 $567

TP-RECT-3042-??-?? 30 42 $235 $259 $353 $454 $730

TP-RECT-3048-??-?? 30 48 $242 $266 $364 $463 $745

TP-RECT-3054-??-?? 30 54 $335 $368 $502 $712 $760

TP-RECT-3060-??-?? 30 60 $337 $370 $505 $720 $775

TP-RECT-3066-??-?? 30 66 $339 $373 $509 $728 $1,236

TP-RECT-3072-??-?? 30 72 $342 $376 $514 $736 $1,250

TP-RECT-3078-??-?? 30 78 $406 $446 $608 $745 $1,265

TP-RECT-3084-??-?? 30 84 $430 $472 $645 $753 $1,280

TP-RECT-2436-??-?? 24 36 $222 $243 $333 $439 $540

TP-RECT-2442-??-?? 24 42 $224 $246 $336 $447 $554

TP-RECT-2448-??-?? 24 48 $226 $249 $339 $454 $570

TP-RECT-2454-??-?? 24 54 $333 $366 $499 $704 $869

TP-RECT-2460-??-?? 24 60 $335 $368 $502 $712 $885

TP-RECT-2466-??-?? 24 66 $337 $370 $505 $720 $900

TP-RECT-2472-??-?? 24 72 $338 $372 $508 $728 $914

TP-RECT-2478-??-?? 24 78 $342 $376 $514 $736 $930

TP-RECT-2484-??-?? 24 84 $360 $396 $540 $745 $944

TP-RECT-1936-??-?? 19 36 $184 $203 $277 $352 $527

TP-RECT-1942-??-?? 19 42 $186 $205 $280 $360 $542

TP-RECT-1948-??-?? 19 48 $189 $208 $283 $446 $557

TP-RECT-1954-??-?? 19 54 $261 $287 $391 $704 $869

TP-RECT-1960-??-?? 19 60 $263 $289 $395 $712 $885

TP-RECT-1966-??-?? 19 66 $265 $292 $398 $720 $900

TP-RECT-1972-??-?? 19 72 $267 $294 $401 $728 $914

TP-RECT-1978-??-?? 19 78 $270 $297 $405 $736 $930

TP-RECT-1984-??-?? 19 84 $272 $300 $409 $745 $944

TP-RECT-1936-??-?? 19 36 $407 $900 $1,257 $1,149 $1,337

TP-RECT-1942-??-?? 19 42 $461 $955 $1,372 $1,210 $1,399

TP-RECT-1948-??-?? 19 48 $514 $1,009 $1,486 $1,370 $1,604

TP-RECT-1954-??-?? 19 54 $694 $1,064 $1,601 $1,536 $1,819

TP-RECT-1960-??-?? 19 60 $761 $1,119 $1,715 $1,596 $1,879

TP-RECT-1966-??-?? 19 66 $829 $1,174 $1,829 $1,760 $2,089

TP-RECT-1972-??-?? 19 72 $896 $1,228 $1,944 $1,923 $2,300

TP-RECT-1978-??-?? 19 78 $963 $1,283 $2,058 $1,984 $2,362

TP-RECT-1984-??-?? 19 84 $1,031 $1,338 $2,173 $2,045 $2,422

19" Deep

TP-RECT-2436-??-?? 24 36 $491 $986 $1,437 $1,352 $1,591

TP-RECT-2442-??-?? 24 42 $558 $1,056 $1,582 $1,429 $1,668

TP-RECT-2448-??-?? 24 48 $626 $1,124 $1,726 $1,635 $1,933

TP-RECT-2454-??-?? 24 54 $694 $1,194 $1,871 $1,842 $2,200

TP-RECT-2460-??-?? 24 60 $761 $1,264 $2,016 $1,918 $2,276

TP-RECT-2466-??-?? 24 66 $829 $1,332 $2,160 $2,125 $2,542

TP-RECT-2472-??-?? 24 72 $896 $1,402 $2,305 $2,331 $2,808

TP-RECT-2478-??-?? 24 78 $963 $1,471 $2,449 $2,408 $2,884

TP-RECT-2484-??-?? 24 84 $1,031 $1,540 $2,594 $2,484 $2,961

24" Deep

TP-RECT-3036-??-?? 30 36 $593 $1,090 $1,655 $1,596 $1,895

TP-RECT-3042-??-?? 30 42 $677 $1,176 $1,836 $1,693 $1,992

TP-RECT-3048-??-?? 30 48 $761 $1,264 $2,016 $1,951 $2,323

TP-RECT-3054-??-?? 30 54 $846 $1,350 $2,196 $2,208 $2,656

TP-RECT-3060-??-?? 30 60 $930 $1,436 $2,377 $2,304 $2,752

TP-RECT-3066-??-?? 30 66 $1,014 $1,523 $2,558 $2,562 $3,084

TP-RECT-3072-??-?? 30 72 $1,098 $1,610 $2,738 $2,819 $3,415

TP-RECT-3078-??-?? 30 78 $1,184 $1,696 $2,919 $2,915 $3,512

TP-RECT-3084-??-?? 30 84 $1,268 $1,783 $3,100 $3,011 $3,608

30" Deep

- 3DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish.- Please see the Materials Specification Guide for specifications and finishes.

19" Deep

24" Deep

30" Deep



rectangular table top 3DL and solid wood options - subject to minimum order requirements, see below.

BL-L1 BB-L1 PL-L1 PW-L13D-J1 Model Number Depth Length



TFL

T1-A1



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1

rectangular table top TFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square






contents tables

beacon base

- 27" diameter base- 3" diameter column- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights

detailsdetails




silver black white

finishes


pricing




Desk Height




Standing Height

dimensions

27-3/4"

Desk Height

40-3/4"

Standing Height

Model Number



12"

12"32"

32"

12"

12"24"

24"

10"

10"20"

20"








contents tables

mission base

- 27" x 27" square base- 3" x 3" square column- fully welded construction of top plate to column- disc is bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights

details

table tops for use with mission bases




silver black white

finishes


12"

12"26"

dimensions

27-3/4"

Desk Height

40-3/4"

Standing Height

26"

12"

12"20"

20"

10"

10"16"

16"




pricing




Desk Height




Standing Height

Model Number







contents tables




newport x-base

details- 3" diameter column and feet are 1-7/8" diameter- fully welded construction of top plate to column- x-base is bolted to column, field assembly required- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights


27-3/4"

For 48" Round/Square and 54" & 60" Round Table Tops

12"

12"38"





silver black white

finishes

dimensions


pricing Model Number Black



Desk Height

38"


12"

12"32"

32"

12"

12"26"

26"

40-3/4"


Standing Height

table tops for newport x-bases

squareround





contents tables

cabrillo base

details


- 3" diameter column and feet are 1-1/2" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights

12"

12"38"







pricing

Model Number Black



Desk Height

Standing Height

dimensions

27-3/4"

pricing

40-3/4"


38"

12"

12"32"


32"

silver black white

finishes

table tops for cabrillo bases

squareround





contents tables







venice x-base

details- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel


12"

12"38-1/4"


27-3/4"

Desk Height

38-1/4"


12"

12"32-3/4"

32-3/4"

12"

12"26"

26"


dimensions




40-3/4"

Standing Height



squareround

silver black white


premium

polished chrome

brushed chrome

Desk Height

Standing Height





contents tables

topanga base

For 30", 36" and 42" Table Tops

12"

12"23-3/4"

dimensions

27-3/4"



pricing




ML-TDSC-29-??? 30", 36" or 42" round 27 3/4 23 3/4 1 $1,163 $1,419

Desk Height

ML-TDSC-42-??? 30", 36" or 42" round 40 3/4 23 3/4 1 $1,555 $1,918

23-3/4"

40-3/4"

- 23-3/4" diameter base- desk height column is 4" at the top and 2" at the bottom- standing height column is 5" at the top and 2-1/4" at the bottom- glides raise the base 1" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel - available in desk and standing heights

detailsdetails




Standing Height

silver black white


premium

polished chrome

brushed chrome



141deskmakers.com


Cafe trainingtable of contents Training Table Tops 142-151Newport 152-155Venice 156-159Cabrillo 160-161Strands 162-163Modesty Panels 164-165Ganging Brackets 166




contents tables

training table tops

training tables

finishes

1-1/8" thick thermally fused laminate (TFL) with multiple edge options1-1/8" thick high pressure laminate (HPL) with multiple edge options1-1/8" thick plain sawn veneer, quarter sawn and planked random match veneer with multiple edge options1" thick HPL with exposed plywood core1-1/8" thick HPL with MDF core and PVC knife edge1-1/8" thick thermofoil three dimensional laminate (3DL) (select sizes) 1-1/2" thick butcher block (select sizes and shapes)1-1/8" thick planked wood (select sizes and shapes)

rectangular trapezoid half-round

grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 36" to 84" in 6" increments

rectangular tops

grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 38", 48" and 60"

half round tops

grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 38", 48", 60" and 72"

trapezoid tops

user edges for groups j and kshading indicates user edges

edges for training tables

A11-1/8" thick top2mm PVC edge

group a

1-1/8" thick top3DL ergo edge

group j

1-1/8" thick MDF top2mm PVC Knife edge

group k

1-1/8" & 1-1/2" thick solid wood topsolid wood square edge

group l

J1

K1

L1

1" thick topexposed plywood edge

group p

P1

user edge only profiled

for when tables are to be ganged together

j1 edge k1 edge

all edges profiled

for when tables are freestanding

j4 edge k4 edge


group m

M1





contents tables

AC-ELV1-01- (2) power outlets- (1) convenience outlet on bottom- (2) RJ-45 keystone knockouts (jacks not included)- 108" long 15amp plug cord- standard Finish: Black

AC-ELV1-01-USB

- (2) power outlets- (2) 2.1A USB charging ports- (1) convenience outlet on bottom- (2) RJ-45 keystone knock outs (jacks not included)- 108" long 15amp plug cord- standard Finish: Black

AC-ELCV-??- multiple cofigurations available- spill resistant power outlets- (2) 2.1A USB charging ports- 108" long 15amp plug cord- clamp mount- finishes: Black, Silver, and White

Please see the electrical pricebook for additional information and pricing

power grommets

(image shown for reference only)

(image shown for reference only)

surface grommet sold separately

surface grommet sold separately

AC-PWRG-03- round 3" grommet hole- spill resistant power outlets- (2) 2.1A USB charging ports- 84" long 15amp plug cord- mounting ring- finishes: Black, Silver, and White

grommet locations





contents tables


TT-RECT-1936-??-?? 19 36 $407 $554 $587 $900 $1,257 $1,149 $1,337

TT-RECT-1942-??-?? 19 42 $461 $579 $610 $955 $1,372 $1,210 $1,399

TT-RECT-1948-??-?? 19 48 $514 $603 $634 $1,009 $1,486 $1,370 $1,604

TT-RECT-1954-??-?? 19 54 $694 $890 $955 $1,064 $1,601 $1,536 $1,819

TT-RECT-1960-??-?? 19 60 $761 $915 $979 $1,119 $1,715 $1,596 $1,879

TT-RECT-1966-??-?? 19 66 $829 $940 $1,003 $1,174 $1,829 $1,760 $2,089

TT-RECT-1972-??-?? 19 72 $896 $963 $1,028 $1,228 $1,944 $1,923 $2,300

TT-RECT-1978-??-?? 19 78 $963 $988 $1,051 $1,283 $2,058 $1,984 $2,362

TT-RECT-1984-??-?? 19 84 $1,031 $1,013 $1,075 $1,338 $2,173 $2,045 $2,422

19" Deep

TT-RECT-2436-??-?? 24 36 $491 $591 $622 $986 $1,437 $1,352 $1,591

TT-RECT-2442-??-?? 24 42 $558 $621 $652 $1,056 $1,582 $1,429 $1,668

TT-RECT-2448-??-?? 24 48 $626 $650 $682 $1,124 $1,726 $1,635 $1,933

TT-RECT-2454-??-?? 24 54 $694 $944 $1,008 $1,194 $1,871 $1,842 $2,200

TT-RECT-2460-??-?? 24 60 $761 $973 $1,038 $1,264 $2,016 $1,918 $2,276

TT-RECT-2466-??-?? 24 66 $829 $1,004 $1,067 $1,332 $2,160 $2,125 $2,542

TT-RECT-2472-??-?? 24 72 $896 $1,034 $1,097 $1,402 $2,305 $2,331 $2,808

TT-RECT-2478-??-?? 24 78 $963 $1,064 $1,127 $1,471 $2,449 $2,408 $2,884

TT-RECT-2484-??-?? 24 84 $1,031 $1,093 $1,156 $1,540 $2,594 $2,484 $2,961

24" Deep

TT-RECT-3036-??-?? 30 36 $593 $733 $799 $1,090 $1,655 $1,596 $1,895

TT-RECT-3042-??-?? 30 42 $677 $770 $835 $1,176 $1,836 $1,693 $1,992

TT-RECT-3048-??-?? 30 48 $761 $806 $872 $1,264 $2,016 $1,951 $2,323

TT-RECT-3054-??-?? 30 54 $846 $1,205 $1,337 $1,350 $2,196 $2,208 $2,656

TT-RECT-3060-??-?? 30 60 $930 $1,242 $1,374 $1,436 $2,377 $2,304 $2,752

TT-RECT-3066-??-?? 30 66 $1,014 $1,278 $1,410 $1,523 $2,558 $2,562 $3,084

TT-RECT-3072-??-?? 30 72 $1,098 $1,316 $1,447 $1,610 $2,738 $2,819 $3,415

TT-RECT-3078-??-?? 30 78 $1,184 $1,352 $1,484 $1,696 $2,919 $2,915 $3,512

TT-RECT-3084-??-?? 30 84 $1,268 $1,388 $1,520 $1,783 $3,100 $3,011 $3,608

30" Deep


2mm Wood Square Square

1-1/8" ThickQuarter Sawn

1-1/2" ThickWalnut


1-1/8" ThickWalnut

V2-M1 BL-L1 BB-L1 PL-L1 PW-L1

Veneer Planked WoodButcher Block

Square Square2mm Wood


V1-M1

- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer are for use with flip-top bases only.- DO NOT ORDER UNITS 54" AND LONGER FOR USE WITH POST LEGS OR T-LEGS.- Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.


Ergo

3DL

3D-J1

TT-RECT-3036-??-?? 30 36 $228 $251 $342 $447 $567

TT-RECT-3042-??-?? 30 42 $235 $259 $353 $454 $730

TT-RECT-3048-??-?? 30 48 $242 $266 $364 $463 $745

TT-RECT-3054-??-?? 30 54 $335 $368 $502 $712 $760

TT-RECT-3060-??-?? 30 60 $337 $370 $505 $720 $775

TT-RECT-3066-??-?? 30 66 $339 $373 $509 $728 $1,236

TT-RECT-3072-??-?? 30 72 $342 $376 $514 $736 $1,250

TT-RECT-3078-??-?? 30 78 $406 $446 $608 $745 $1,265

TT-RECT-3084-??-?? 30 84 $430 $472 $645 $753 $1,280

TT-RECT-2436-??-?? 24 36 $222 $243 $333 $439 $540

TT-RECT-2442-??-?? 24 42 $224 $246 $336 $447 $554

TT-RECT-2448-??-?? 24 48 $226 $249 $339 $454 $570

TT-RECT-2454-??-?? 24 54 $333 $366 $499 $704 $869

TT-RECT-2460-??-?? 24 60 $335 $368 $502 $712 $885

TT-RECT-2466-??-?? 24 66 $337 $370 $505 $720 $900

TT-RECT-2472-??-?? 24 72 $338 $372 $508 $728 $914

TT-RECT-2478-??-?? 24 78 $342 $376 $514 $736 $930

TT-RECT-2484-??-?? 24 84 $360 $396 $540 $745 $944

TT-RECT-1936-??-?? 19 36 $184 $203 $277 $352 $527

TT-RECT-1942-??-?? 19 42 $186 $205 $280 $360 $542

TT-RECT-1948-??-?? 19 48 $189 $208 $283 $446 $557

TT-RECT-1954-??-?? 19 54 $261 $287 $391 $704 $869

TT-RECT-1960-??-?? 19 60 $263 $289 $395 $712 $885

TT-RECT-1966-??-?? 19 66 $265 $292 $398 $720 $900

TT-RECT-1972-??-?? 19 72 $267 $294 $401 $728 $914

TT-RECT-1978-??-?? 19 78 $270 $297 $405 $736 $930

TT-RECT-1984-??-?? 19 84 $272 $300 $409 $745 $944


19" Deep

24" Deep

30" Deep



TFL

T1-A12mm PVC Knife Exposed Plywood


HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1

- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer are for use with fliptop bases only.- DO NOT ORDER UNITS 54" AND LONGER FOR USE WITH POST LEGS OR T-LEGS.- Please see the Materials Specification Guide for specifications and finishes.


rectangular table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.





contents tables


TT-RECS-1954-??-?? 19 54 $735 $932 $996 NA NA NA NA

TT-RECS-1960-??-?? 19 60 $803 $957 $1,020 NA NA NA NA

TT-RECS-1966-??-?? 19 66 $876 $987 $1,049 NA NA NA NA

TT-RECS-1972-??-?? 19 72 $943 $1,010 $1,074 NA NA NA NA

TT-RECS-1978-??-?? 19 78 $1,021 $1,046 $1,110 NA NA NA NA

TT-RECS-1984-??-?? 19 84 $1,089 $1,071 $1,134 NA NA NA NA

24" Deep

TT-RECS-2454-??-?? 24 54 $735 $986 $1,049 NA NA NA NA

TT-RECS-2460-??-?? 24 60 $803 $1,015 $1,080 NA NA NA NA

TT-RECS-2466-??-?? 24 66 $876 $1,050 $1,114 NA NA NA NA

TT-RECS-2472-??-?? 24 72 $943 $1,081 $1,144 NA NA NA NA

TT-RECS-2478-??-?? 24 78 $1,021 $1,122 $1,186 NA NA NA NA

TT-RECS-2484-??-?? 24 84 $1,089 $1,151 $1,215 NA NA NA NA

30" Deep

TT-RECS-3054-??-?? 30 54 $887 $1,247 $1,379 NA NA NA NA

TT-RECS-3060-??-?? 30 60 $971 $1,283 $1,415 NA NA NA NA

TT-RECS-3066-??-?? 30 66 $1,061 $1,325 $1,457 NA NA NA NA

TT-RECS-3072-??-?? 30 72 $1,145 $1,362 $1,493 NA NA NA NA

TT-RECS-3078-??-?? 30 78 $1,242 $1,410 $1,542 NA NA NA NA

TT-RECS-3084-??-?? 30 84 $1,326 $1,447 $1,579 NA NA NA NA

36" Deep




1-1/2" ThickWalnut


1-1/8" ThickWalnut





V1-M1


Ergo

3DL

3D-J1

TT-RECS-3054-??-?? 30 54 $376 $414 $565 $754 $802

TT-RECS-3060-??-?? 30 60 $379 $416 $568 $761 $816

TT-RECS-3066-??-?? 30 66 $386 $424 $579 $775 $1,282

TT-RECS-3072-??-?? 30 72 $389 $427 $583 $783 $1,297

TT-RECS-3078-??-?? 30 78 $464 $511 $696 $803 $1,323

TT-RECS-3084-??-?? 30 84 $488 $537 $732 $811 $1,338

TT-RECS-2454-??-?? 24 54 $374 $412 $562 $746 $911

TT-RECS-2460-??-?? 24 60 $376 $414 $565 $754 $927

TT-RECS-2466-??-?? 24 66 $384 $422 $576 $766 $946

TT-RECS-2472-??-?? 24 72 $385 $423 $577 $775 $961

TT-RECS-2478-??-?? 24 78 $400 $441 $601 $795 $988

TT-RECS-2484-??-?? 24 84 $418 $460 $627 $803 $1,003

TT-RECS-1954-??-?? 19 54 $303 $333 $453 $746 $911

TT-RECS-1960-??-?? 19 60 $305 $335 $458 $754 $927

TT-RECS-1966-??-?? 19 66 $312 $343 $468 $766 $946

TT-RECS-1972-??-?? 19 72 $314 $346 $472 $775 $961

TT-RECS-1978-??-?? 19 78 $329 $361 $492 $795 $988

TT-RECS-1984-??-?? 19 84 $331 $364 $496 $803 $1,003


19" Deep

24" Deep

30" Deep



TFL



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1


rectangular table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.

- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- For use with Post Legs and T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.

- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For use with Post Legs and T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.





contents tables

TT-TRPZ-1938-??-?? 19 19-38 $236 $259 $354 $400 $505

TT-TRPZ-2448-??-?? 24 24-48 $243 $267 $365 $467 $570

TT-TRPZ-2460-??-?? 24 36-60 $355 $390 $532 $569 $677

TT-TRPZ-3060-??-?? 30 30-60 $397 $437 $596 $724 $775

TT-TRPZ-4272-??-?? 30 42-72 $459 $504 $687 $733 $1,250

TT-TRPZ-1938-??-?? 19 19-38 $424 $571 $602 NA NA NA NA

TT-TRPZ-2448-??-?? 24 24-48 $626 $660 $693 NA NA NA NA

TT-TRPZ-2460-??-?? 24 36-60 $761 $986 $1,049 NA NA NA NA

TT-TRPZ-3060-??-?? 30 30-60 $930 $1,254 $1,386 NA NA NA NA

TT-TRPZ-4272-??-?? 30 42-72 $1,098 $1,329 $1,461 NA NA NA NA

Model Number Depth




1-1/2" ThickWalnut


1-1/8" ThickWalnut





V1-M1


Ergo

3DL

3D-J1 Model Number Depth



TFL



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1

TT-HRND-1938-??-?? 19 38 $256 $282 $385 $527 $649

TT-HRND-2448-??-?? 24 48 $322 $355 $484 $620 $775

TT-HRND-3060-??-?? 30 60 $468 $515 $702 $733 $898

TT-HRND-1938-??-?? 19 38 $424 $571 $602 NA NA NA NA

TT-HRND-2448-??-?? 24 48 $626 $660 $693 NA NA NA NA

TT-HRND-3060-??-?? 30 60 $930 $1,254 $1,386 NA NA NA NA

Model Number Depth




1-1/2" ThickWalnut


1-1/8" ThickWalnut





V1-M1


Ergo

3DL

3D-J1 Model Number Depth



TFL



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1Length

Length

Length

Length

half round table top TFL and HPL options

half round table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.

trapezoid table top TFL and HPL options

trapezoid table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.

- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.

- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.

- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.

- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.





contents tables

newport bases

silver black white

finishesdetailsdetails- 2-3/8" diameter column and feet- fully welded construction- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in flip-top and fixed bases


2-3/8"

5-1/2"26"

dimensions

27-3/4"

Desk Height

5-1/2"


2-3/8"

5-1/2"22"

5-1/2"


2-3/8"

5-1/2"16"

5-1/2"

table tops for newport flip-top bases

rectangular*specify table tops without stiffener bar

- worksurfaces lock in both flat and upright positions- paddle release handle is standard underneath the surface and can be operated with one hand- user side flips up- steel beam cross bar for lateral support- hinged modesty panels should be used with flip-top bases- standard with 2 locking and 2 non-locking casters- solid wood table tops cannot be used on flip-top bases

steel beam cross bar

nesting dimensionstables can be nested together for storage when placed in the upright position

For 48" and 54" Long Table Tops For 60" and 66" Long Table Tops For 72" Long Table Tops

58-1/8"46-1/8" 70-1/8"

7-1/2"

*based on 60" table top

2-1/2"

5"

65"

flip-top bases





contents tables

TT-FT01-1948-?? 19" x 48" 27 3/4 16 2 $928

TT-FT01-1954-?? 19" x 54" 27 3/4 16 2 $952

TT-FT01-1960-?? 19" x 60" 27 3/4 16 2 $961

TT-FT01-1966-?? 19" x 66" 27 3/4 16 2 $977

TT-FT01-1972-?? 19" x 72" 27 3/4 16 2 $990

TT-FT01-2448-?? 24" x 48" 27 3/4 22 2 $928

TT-FT01-2454-?? 24" x 54" 27 3/4 22 2 $952

TT-FT01-2460-?? 24" x 60" 27 3/4 22 2 $961

TT-FT01-2466-?? 24" x 66" 27 3/4 22 2 $977

TT-FT01-2472-?? 24" x 72" 27 3/4 22 2 $990

TT-FT01-3048-?? 30" x 48" 27 3/4 26 2 $938

TT-FT01-3054-?? 30" x 54" 27 3/4 26 2 $961

TT-FT01-3060-?? 30" x 60" 27 3/4 26 2 $972

TT-FT01-3066-?? 30" x 66" 27 3/4 26 2 $986

TT-FT01-3072-?? 30" x 72" 27 3/4 26 2 $999 TT-TLG6-16-SET-??? 19" deep 27 3/4 16 2 $368 $463

TT-TLG6-22-SET-??? 24" deep 27 3/4 22 2 $396 $491

TT-TLG6-26-SET-??? 30" deep 27 3/4 26 2 $402 $497

TT-TLG7-16-SET-??? 19" deep 27 3/4 16 2 $454 $549

TT-TLG7-22-SET-??? 24" deep 27 3/4 22 2 $485 $579

TT-TLG7-26-SET-??? 30" deep 27 3/4 26 2 $491 $587

newport flip-top bases newport fixed t-leg details

pricing

Model Number



- To order, replace "??" with SM for Silver Metallic, BL for Black or WT for White finish.- Includes casters, 2 locking and 2 non-locking..- All units include cross-bar that acts as anti-sag stabilizer. Order worksurfaces without stiffener bar.

table tops for newport fixed bases


*table tops 54" and longer require stiffener bar


2-3/8"

5-1/2"26"

dimensions

27-3/4"

Desk Height

5-1/2"


2-3/8"

5-1/2"22"

5-1/2"


2-3/8"

5-1/2"16"

5-1/2"

pricing Model Number



Levelers

Black

Casters

- To order, replace "??" with SLV for Silver Metallic, BLK for Black or WHT for White finish. - Table tops 54" and longer require anti-sag stiffener bar.

19" Deep

24" Deep

30" Deep





contents tables

venice bases

silver black white


premium

polished chrome

brushed chrome

details- 2-1/4" steel column and feet are cast aluminum- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel

table tops for venice fixed bases

rectangular trapezoid half-round*table tops 54" and longer require stiffener bar

dimensions

nesting dimensionstables can be nested together for storage when placed in the upright position

- worksurfaces lock in both flat and upright positions- paddle release handle is standard underneath the surface and can be operated with one hand- user side flips up- hinged modesty panels should be used with flip-top bases- standard with 2 locking and 2 non-locking casters- solid wood table tops cannot be used on flip-top bases

6-1/4"

*based on 60" table top

1-3/4"

3-1/2"

63-1/2"

27-3/4"

Desk HeightFor 30" Deep Table Tops

2-1/4"

8-5/8"26"

5-1/2"



2-1/4"

8-5/8"20"

5-1/2"

2-1/4"

8-5/8"15-1/4"

5-1/2"

flip-top bases





contents tables

ML-PRPL-TL15-SET-?? 19" deep 27 3/4 15 1/4 2 $626 $749

ML-PRPL-TL20-SET-?? 24" deep 27 3/4 20 2 $643 $765

ML-PRPL-TL26-SET-?? 30" deep 27 3/4 26 2 $682 $807

ML-PRPL-TC15-SET-?? 19" deep 27 3/4 15 1/4 2 $682 $807

ML-PRPL-TC20-SET-?? 24" deep 27 3/4 20 2 $699 $824

ML-PRPL-TC26-SET-?? 30" deep 27 3/4 26 2 $740 $865

venice flip-top t-leg base venice fixed t-leg base

table tops for venice fixed bases



dimensions




Levelers

Standard

Casters


ML-FT04-15-SET-?? 19" deep 27 3/4 15 1/4 2 $1,100 $1,340

ML-FT04-20-SET-?? 24" deep 27 3/4 20 2 $1,117 $1,356

ML-FT04-26-SET-?? 30" deep 27 3/4 26 2 $1,159 $1,398



Included PremiumBase Height Standard


optional wiremanagement

27-3/4"

Desk HeightFor 30" Deep Table Tops

2-1/4"

8"26"

6"



2-1/4"

8"20"

6"

2-1/4"

8"15-1/4"

6"

Optional wire management grommets can be specified in the vertical columns on all Venice bases. When option is specified, an oval cutout, 1-1/4" x 2-1/4", is included in the column below the top plate and above the feet connection. Plastic grommet covers are included to cover the cutouts. OP-GROM-PRPL for $40 per leg.





contents tables

cabrillo base

details- 2" diameter column and feet are 1-3/8" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in fixed height with levelers or casters

silver black white

finishes

ML-TLG8-16-SET-?? 19" deep 27 3/4 16 2 $422 $493

ML-TLG8-22-SET-?? 24" deep 27 3/4 22 2 $447 $516

ML-TLG8-26-SET-?? 30" deep 27 3/4 26 2 $474 $545

ML-TLG9-15-SET-?? 19" deep 27 3/4 16 2 $487 $557

ML-TLG9-20-SET-?? 24" deep 27 3/4 22 2 $512 $582

ML-TLG9-26-SET-?? 30" deep 27 3/4 26 2 $539 $609




Levelers

Black

Casters



1-3/8"

5-1/2"26"

dimensions

27-3/4"

Desk Height with Levelers

5-1/2"



table tops for cabrillo fixed bases



1-3/8"

5-1/2"22"

5-1/2"

1-3/8"

5-1/2"16"

5-1/2"

27-3/4"

Desk Height with Casters





contents tables

TT-RPST-02-SET-BLK 27 3/4 2 4 $225

TT-RPST-02-SET-SLV 27 3/4 2 4 $241

TT-RPST-03-SET-BLK 27 3/4 2 4 $324

TT-RPST-03-SET-SLV 27 3/4 2 4 $387

TT-RPST-14-SET-SLV 27 3/4 2 1/2 4 $495

TT-RPST-14-SET-BLK 27 3/4 2 1/2 4 $545

TT-RPST-14-SET-WHT 27 3/4 2 1/2 4 $545

TT-RPST-14-SET-RAW 27 3/4 2 1/2 4 $545

strands legs

round post details- 2" diameter column - fully welded construction of top plate to column- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel- powdercoat finish

silver black

round post finishes

table tops for strands legs


*table tops 54" and longer require stiffener bar *maximum table top size is 36" x 72"

square post details- 2-1/2" x 2-1/2" column - fully welded construction of top plate to column- each leg has one leveling glide located at the bottom of each leg and provides 1-1/2" of adjustment. - 14 gauge tube steel- powdercoat finish

silver black white

square post finishes

raw steel square post pricing

Model Number Base Size Legs


round post pricing

Model Number Base Size Legs


Levelers

Casters

levelers casters





contents tables

TT-LMOD-1232-? 12 32 $116 $187

TT-LMOD-1234-? 12 34 $118 $188

TT-LMOD-1236-? 12 36 $120 $192

TT-LMOD-1238-? 12 38 $121 $193

TT-LMOD-1240-? 12 40 $124 $197

TT-LMOD-1242-? 12 42 $127 $202

TT-LMOD-1244-? 12 44 $129 $206

TT-LMOD-1246-? 12 46 $130 $208

TT-LMOD-1248-? 12 48 $132 $211

TT-LMOD-1250-? 12 50 $134 $214

TT-LMOD-1252-? 12 52 $135 $216

TT-LMOD-1254-? 12 54 $138 $220

TT-LMOD-1256-? 12 56 $142 $228

TT-LMOD-1258-? 12 58 $148 $237

TT-LMOD-1260-? 12 60 $152 $243

TT-LMOD-1262-? 12 62 $154 $245

TT-LMOD-1264-? 12 64 $160 $256

TT-LMOD-1266-? 12 66 $164 $263

TT-LMOD-1268-? 12 68 $167 $268

TT-LMOD-1270-? 12 70 $172 $275

TT-LMOD-1272-? 12 72 $178 $285

Model Number

- Grain runs horizontally for all sizes.- Ships unattached.- Cannot be used on fliptop tables.

Height Width

TT-LMDH-1232-? 12 32 $187 $300

TT-LMDH-1234-? 12 34 $188 $301

TT-LMDH-1236-? 12 36 $190 $305

TT-LMDH-1238-? 12 38 $193 $309

TT-LMDH-1240-? 12 40 $194 $312

TT-LMDH-1242-? 12 42 $208 $332

TT-LMDH-1244-? 12 44 $212 $340

TT-LMDH-1246-? 12 46 $213 $341

TT-LMDH-1248-? 12 48 $216 $346

TT-LMDH-1250-? 12 50 $229 $366

TT-LMDH-1252-? 12 52 $231 $368

TT-LMDH-1254-? 12 54 $233 $372

TT-LMDH-1256-? 12 56 $235 $375

TT-LMDH-1258-? 12 58 $246 $395

TT-LMDH-1260-? 12 60 $250 $400

TT-LMDH-1262-? 12 62 $252 $404

TT-LMDH-1264-? 12 64 $253 $405

TT-LMDH-1266-? 12 66 $267 $427

TT-LMDH-1268-? 12 68 $269 $431

TT-LMDH-1270-? 12 70 $272 $436

TT-LMDH-1272-? 12 72 $275 $440

- Grain runs horizontally for all sizes.- Ships unattached.- Ships with hinges. For use on fliptop tables.

HPL w/PVC (H)TFL (T) Model Number Height Width HPL w/PVC (H)TFL (T)

laminate fixed modesty panel12" high

laminate hinged modesty panel12" high





contents tables

- Use to connect tables where the stregth of the connection is paramount and reconfigurations will occur infrequently. - Includes two brackets and screws. - Must be field installed.

Model Number Price

AC-BRKT-TT Two brackets with screws $17

TT-BRKT-GANG One bracket consisting of two symmetrical pieces $37

- Use to connect tables that will be frequently disconnected and reconfigured.- Set includes two symmetrical ganging bracket pieces and screws. - Must be field installed. - Not recommended for areas with unlevel floors.

One piece of connector is secured to the underside of each table to be ganged together.

By rotating the ganging pieces, the table is securely ganged together.

TT-AMOD-1232 12 32 $267

TT-AMOD-1234 12 34 $275

TT-AMOD-1236 12 36 $282

TT-AMOD-1238 12 38 $289

TT-AMOD-1240 12 40 $297

TT-AMOD-1242 12 42 $303

TT-AMOD-1244 12 44 $309

TT-AMOD-1246 12 46 $319

TT-AMOD-1248 12 48 $326

TT-AMOD-1250 12 50 $370

TT-AMOD-1252 12 52 $376

TT-AMOD-1254 12 54 $384

TT-AMOD-1256 12 56 $393

TT-AMOD-1258 12 58 $399

TT-AMOD-1260 12 60 $406

TT-AMOD-1262 12 62 $413

TT-AMOD-1264 12 64 $420

TT-AMOD-1266 12 66 $426

TT-AMOD-1268 12 68 $435

TT-AMOD-1270 12 70 $442

TT-AMOD-1272 12 72 $449

Model Number

- Ships unattached.- Cannot be used on fliptop tables.

Height Width 3/16"Frosted Acrylic (A)

unframed acrylic modesty panel12" high

training table connecting bracketfor leveling applications

Model Number Price

training table ganging connector bracket



169deskmakers.com


Cafe occasionaltable of contents Occasional Table Tops 170-173Beacon 174-175Mission 176-177Venice 178-179Zuma 180-181Torrey 182Balboa 183Doheny 184-185Solana 186-187




contents tables

TP-FULR-1818-??-?? 18 18 $315 NA NA NA NA

TP-FULR-2020-??-?? 20 20 $378 NA NA NA NA

TP-FULR-2222-??-?? 22 22 $403 NA NA NA NA

TP-FULR-2424-??-?? 24 24 $420 NA NA NA NA

TP-FULR-2626-??-?? 26 26 $447 NA NA NA NA

TP-FULR-2828-??-?? 28 28 $475 NA NA NA NA

TP-FULR-3030-??-?? 30 30 $489 NA NA NA NA

TP-FULR-3232-??-?? 32 32 $540 NA NA NA NA

TP-FULR-3434-??-?? 34 34 $600 NA NA NA NA

TP-FULR-3636-??-?? 36 36 $667 NA NA NA NA





TP-FULR-1818-??-?? 18 18 $137 $150 $205 $237 $260

TP-FULR-2020-??-?? 20 20 $170 $187 $255 $295 $323

TP-FULR-2222-??-?? 22 22 $204 $224 $306 $354 $388

TP-FULR-2424-??-?? 24 24 $243 $267 $364 $422 $461

TP-FULR-2626-??-?? 26 26 $285 $314 $428 $496 $542

TP-FULR-2828-??-?? 28 28 $328 $361 $492 $569 $623

TP-FULR-3030-??-?? 30 30 $380 $418 $569 $659 $721

TP-FULR-3232-??-?? 32 32 $383 $422 $575 $738 $817

TP-FULR-3434-??-?? 34 34 $392 $431 $588 $800 $864

TP-FULR-3636-??-?? 36 36 $414 $455 $621 $828 $882




TFL

T1-A1



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1


round table top TFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square






contents tables

TP-RECC-1818-??-?? 12 18 $234 NA NA NA NA

TP-RECC-2020-??-?? 14 20 $318 NA NA NA NA

TP-RECC-1218-??-?? 12 18 $141 $155 $165 $239 $282

TP-RECC-1420-??-?? 14 20 $153 $168 $185 $270 $375

TP-SQRE-1818-??-?? 18 18 $315 $731 $960 $742 $1,033

TP-SQRE-2020-??-?? 20 20 $350 $756 $980 $840 $1,120

TP-SQRE-2222-??-?? 22 22 $370 $773 $1,008 $874 $1,176

TP-SQRE-2424-??-?? 24 24 $384 $815 $1,104 $904 $1,218

TP-SQRE-2626-??-?? 26 26 $416 $888 $1,222 $1,011 $1,481

TP-SQRE-2828-??-?? 28 28 $478 $945 $1,323 $1,134 $1,863

TP-SQRE-3030-??-?? 30 30 $553 $965 $1,417 $1,288 $2,033

TP-SQRE-3232-??-?? 32 32 $568 $994 $1,562 $1,406 $2,109

TP-SQRE-3434-??-?? 34 34 $608 $1,056 $1,704 $1,480 $2,184

TP-SQRE-3636-??-?? 36 36 $667 $1,148 $1,799 $1,549 $2,236





TP-SQRE-1818-??-?? 18 18 $134 $148 $201 $323 $402

TP-SQRE-2020-??-?? 20 20 $167 $184 $250 $402 $500

TP-SQRE-2222-??-?? 22 22 $200 $220 $301 $419 $529

TP-SQRE-2424-??-?? 24 24 $258 $284 $387 $428 $553

TP-SQRE-2626-??-?? 26 26 $271 $298 $407 $453 $578

TP-SQRE-2828-??-?? 28 28 $289 $317 $433 $471 $602

TP-SQRE-3030-??-?? 30 30 $334 $367 $501 $528 $620

TP-SQRE-3232-??-?? 32 32 $312 $343 $468 $547 $648

TP-SQRE-3434-??-?? 34 34 $333 $366 $499 $595 $731

TP-SQRE-3636-??-?? 36 36 $347 $382 $521 $669 $822




TFL

T1-A1



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1


square table top TFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square


TP-RECT-1818-??-?? 12 18 $213 $731 $960 $742 $1,033

TP-RECT-2020-??-?? 14 20 $289 $815 $1,104 $904 $1,218


rectangular table tops for zuma laptop tables3DL and solid wood optionssubject to minimum order requirements, see below.



TP-RECT-1218-??-?? 12 18 $128 $141 $150 $217 $256

TP-RECT-1420-??-?? 14 20 $139 $153 $168 $245 $341




TFL

T1-A1



HPL1-1/8" Thick


MDF Core1" Thick

Plywood Core

T2-A1 H1-A1 H1-K1 H1-P1


rectangular table tops for zuma laptop tablesTFL and HPL options


Ergo


Square Square

1-1/2" ThickWalnut


1-1/8" ThickWalnut

Square Square


Square CornerSquare Corner

Radius CornerRadius Corner

Square Corner Radius Corner Square Corner Radius Corner





contents tables


pricing

CF-RDDK-03-20-??? 24”, 30” or 36” round or 24” or 30” square 15 20 1 $697

CF-RDDK-03-24-??? 42” round or 36” square 15 24 1 $735

CF-RDDK-03-32-??? 48” round or 42” square 15 32 1 $865

beacon base

- tables tops are sold separately- 3" diameter column- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights

details

dimensions

15"

Occasional Height

details

silver black white

finishes

Model Number



beacon power base

- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- 4" diameter column- top plate allows for centered power grommet- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights

detailsdetails

silver black white

finishes

15"

Occasional Height

compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND

12"

12"32"

32"

12"

12"24"

24"

10"

10"20"

20"



For 24", 30" and 36" Round or 24" or 30" Square Table Tops


pricing

CF-RDDK-EL03-20-??? 24”, 30” or 36” round or 24” or 30” square 15 20 1 $893

CF-RDDK-EL03-24-??? 42” round or 36” square 15 24 1 $931

CF-RDDK-EL03-32-??? 48” round or 42” square 15 32 1 $1,061

Model Number



dimensions 12"

12"32"

32"

12"

12"24"

24"

12"

12"20"

20"

- AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03








contents tables

mission base

- tables tops are sold separately- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights

details

silver black white

finishes

15"

Occasional Height


pricing

CF-SQDK-03-16-??? 24”, 30” or 36” round or 24” or 30” square 15 16 1 $697

CF-SQDK-03-20-??? 42” round or 36” square 15 20 1 $735

CF-SQDK-03-26-??? 48” round or 42” square 15 26 1 $865

Model Number



beacon power base

- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- top plate allows for centered power grommet- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights

detailsdetails

silver black white

finishes

15"

Occasional Height

compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND

- AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03


12"

12"26"

dimensions 26"

12"

12"20"

20"

10"

10"16"

16"



dimensions


12"

12"26"

26"

12"

12"20"

20"

10"

10"16"

16"




pricing

CF-SQDK-EL03-16-??? 24”, 30” or 36” round or 24” or 30” square 15 16 1 $896

CF-SQDK-EL03-20-??? 42” round or 36” square 15 20 1 $931

CF-SQDK-EL03-26-??? 48” round or 42” square 15 26 1 $1,061

Model Number







contents tables

ML-PRPL-03-15-??? 18" round; or 18" square 15 15 1/4 1 $501 $560

ML-PRPL-03-20-??? 24" round; or 24" square 15 20 1 $507 $566

ML-PRPL-03-26-??? 30" and 36" round; or 30" square 15 26 1 $548 $607

venice x-base

details- tables tops are sold separately- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel



15"

Occasional Height


8"

8"15-1/4"

15-1/4"


dimensions






squareround

silver black white


premium

polished chrome

brushed chrome

Occasional Height

8"

8"20"

20"

8"

8"26"

26"





contents tables

zuma base

details- tables tops are sold separately- 1-1/2" steel offset column and base- bolted construction of top and bottom plates to column - plastic glides for carpet and hard surfaces, no adjustment- 13 gauge tube steel - ships unassembled, field assembly required silver black white


premium

ML-LAPT-RND 20" round 24 1/4 14 1 $804 $986





Round Table

dimensions

6"

8"10-1/2"

15-1/2"

14" x 20" Maximum Rectangular Table Top

Front View

24-1/2"

8"

Side View

6"

8"

14"

14"

20" Maximum Diameter Round Table Top

Front View

24-1/2"

11-7/8"

Side View

round laptop table rectangular laptop table

ML-LAPT-RECT 14" x 20" rectangle 24 1/4 15 1/2 1 $813 $995

Rectangular Table





contents tables

SS-CYLT-1818 18 18 18 $786

SS-CYLT-2424 24 24 18 $821

SS-CYLT-2429 24 24 29 $892

Model Number Depth Width HPL OnlyHeight

SS-CUBE-2020 20 20 18 $792

SS-CUBE-2424 24 24 18 $821

SS-CUBE-2429 24 24 29 $892

Model Number Depth Width HPL OnlyHeight

balboa

details- HPL only- concealed levelers- hollow interior- can accept electrical units

cylinder table

square table

details- tables tops are sold separately- built-in wire management through the leg- heavy gauge steel construction- powdercoat finish- made in america

torrey leg

dimensions



11"

9-13/16"

16-3/4"

1-7/8"

minimum and maximum table sizes

Side View Cover Panel View

Top ViewMaximum 60"

Round Table Top


4"

- May only be used on round tables of 48" or less.- Includes leveling glides.- To order, replace "??" with MN for Midnight, HG for Heather Grey, FS for Fresh Snow, AS for Asphalt, BR for Barn Red, BO for Blodd Orange, SN for Sunset, LY for Lemon Yellow, DM for Denim, DO for Deep Ocean, HU for Hunter and MO for Moss.


MAX Table Top Size Leg Size Legs

IncludedLeg

Height

ML-TRAP-17-?? 60" round or 48" square 16 3/4 4 1 $194 $213

Occasional Height

Standard Premium





contents tables

SS-CTBL-2448-?? 24 48 16 $649 $780 $861

Model Number Depth Width B CA

A1

B1

C1B2

C2B3

Height

SS-ETBL-2424-?? 24 24 18 $617 $748 $827


A1

B1

C1B2

C2B3

Height

SS-STBL-1660-?? 16 60 29 $710 $837 $913


A1

B1

C1B2

C2B3

Height

doheny

details- constructed of all 3/4" material with 1-1/8" thick top- front and back are open - available with wood edges- concealed levelers- hollow interior- can accept electrical units

occasional table coffee table

occasional table end table

occasional table sofa table





contents tables

- Units have same legs as used in TeamWorx desking.- TFL model has 2MM PVC edgebanding.- Contact customer service for additional sizes.

SS-CUBL-2020-? 20 20 18 $735 $1,012

SS-CUBL-2424-? 24 24 18 $795 $1,042

SS-CUBL-2429-? 24 24 29 $856 $1,113

Model Number Depth Width TFLHeight HPL

TFL Model HPL Model

solana

details- constructed of all 3/4" material - legs are 5" high- levelers are 3/8" high- TFL model has 2mm PVC edgebanding- hollow interior- can accept electrical units

cube table with legs5" high steel legs



189deskmakers.com


Credenzas 190-191Lecterns 192Conference Board 193

Cafe storagetable of contents




contents tables

CF-BUFM-1960-?? 19 60 36 $2,186 $2,537 $2,567

CF-BUFM-1966-?? 19 66 36 $2,200 $2,556 $2,584

CF-BUFM-1972-?? 19 72 36 $2,236 $2,592 $2,627

CF-BUFM-1978-?? 19 78 36 $2,380 $2,750 $2,813

CF-BUFM-2460-?? 24 60 36 $2,212 $2,565 $2,594

CF-BUFM-2466-?? 24 66 36 $2,226 $2,581 $2,611

CF-BUFM-2472-?? 24 72 36 $2,262 $2,618 $2,654

CF-BUFM-2478-?? 24 78 36 $2,406 $2,777 $2,840

CF-MCRZ-1960-?? 19 60 29 $1,924 $2,182 $2,299

CF-MCRZ-1966-?? 19 66 29 $1,938 $2,200 $2,317

CF-MCRZ-1972-?? 19 72 29 $1,974 $2,234 $2,360

CF-MCRZ-1978-?? 19 78 29 $2,116 $2,482 $2,546

CF-MCRZ-2460-?? 24 60 29 $1,950 $2,296 $2,326

CF-MCRZ-2466-?? 24 66 29 $1,966 $2,315 $2,345

CF-MCRZ-2472-?? 24 72 29 $1,999 $2,350 $2,386

CF-MCRZ-2478-?? 24 78 29 $2,142 $2,510 $2,573

Accessory Furniture

Standard Height Media Credenza4 Door - 3 Bay

- Includes adjustable glides.- 12" x 12" cut-out centered on back panel for wire access and venting.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Three locks required for this unit.


A1

B1 C1

B2 C2

B3 C4

Height

Buffet Height Media Credenza4 Door - 3 Bay

- Includes adjustable glides.- 12" x 12" cut-out centered on back panel for wire access and venting.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Three locks required for this unit.


A1

B1 C1

B2 C2

B3 C4

Height

CF-BUFC-1960-?? 19 60 36 $1,990 $2,337 $2,365

CF-BUFC-1966-?? 19 66 36 $2,003 $2,355 $2,384

CF-BUFC-1972-?? 19 72 36 $2,039 $2,390 $2,427

CF-BUFC-1978-?? 19 78 36 $2,183 $2,549 $2,614

CF-BUFC-2460-?? 24 60 36 $2,017 $2,363 $2,392

CF-BUFC-2466-?? 24 66 36 $2,029 $2,382 $2,411

CF-BUFC-2472-?? 24 72 36 $2,064 $2,416 $2,453

CF-BUFC-2478-?? 24 78 36 $2,209 $2,576 $2,641

CF-BCRZ-1936-?? 19 36 36 $1,429 $1,660 $1,681

CF-BCRZ-1966-?? 19 66 36 $2,486 $2,849 $2,878

CF-BCRZ-1972-?? 19 72 36 $2,522 $2,886 $2,921

CF-BCRZ-1978-?? 19 78 36 $2,668 $3,046 $3,110

CF-BCRZ-2436-?? 24 36 36 $1,465 $1,674 $1,695

CF-BCRZ-2466-?? 24 66 36 $2,512 $2,876 $2,905

CF-BCRZ-2472-?? 24 72 36 $2,547 $2,730 $2,767

CF-BCRZ-2478-?? 24 78 36 $2,694 $2,893 $2,959

Buffet Height Credenza with Drawers4 Door/4 Drawer - 2 Bay

- Includes adjustable glides.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Two locks required for this unit.- Drawers do not lock.


A1

B1 C1

B2 C2

B3 C4

Height

Accessory Furniture

Buffet Height Credenza4 Door - 2 Bay

- Includes adjustable glides.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Two locks required for this unit.


A1

B1 C1

B2 C2

B3 C4

Height





contents tables

LecternAngled Worksurface

Model Number Price

CF-LTN1-2437 25 24 37-43 $1,036

Depth Width Height

- All 3/4" material. - Standard with casters.- Includes grommet in worksurface with pass-thru grommets on middle shelf and bottom for wiring.- Add OP-LCTN-DOOR for $145 to add two 28" high doors.

LecternFlat Worksurface and Keyboard Tray

Model Number Price

CF-LTN2-2437 25 24 37-43 $1,206

Depth Width Height

- All 3/4" material. - Standard with casters and keyboard tray.- Flat worksurface is at 38" high. - Includes grommet in worksurface with pass-thru grommets on middle shelf and bottom for wiring.- Add OP-LCTN-DOOR for $145 to add two 28" high doors.

CF-MDCB-3636 6 36 36 $1,463

CF-MDCB-4848 6 48 48 $1,637

Conference Board2 Door

Model Number PriceDepth Width Height

- All 3/4" material. - Standard with laminate on inside of doors. Add OP-CONF-WTDR for $341 to add white board to both doors.- Use with special dry-erase markers. Markers not included.- Full-face (outset) doors.

Accessory Furniture





contents tablesTerms and Conditions

Please see website for current Terms and Conditions:www.deskmakers.com

Warranty

(Effective for Furniture Sold as of January 1, 2015)

DeskMakers, Inc. furniture is warranted against defects in material and workmanship given normal usage and care for as long the original purchaser owns it.

DeskMakers will repair or replace at its option, and at its own cost, any product that develops a defect during the warranty period. In some cases, DeskMakers may elect to refund the customer’s original purchase price (less reasonable depreciation) in lieu of repair or replacement. Repair, replacement, or refund is the purchaser’s sole remedy, the choice of which rests solely with DeskMakers. DeskMakers shall not be liable for any incidental or consequential damages including lost profits and loss of use of product.

Limitations:

• The warranty for wood guest chair frames shall be limited to 10 years. • The warranty for PVC edges, wood veneer edges, HPL edges, mechanical parts such as ball bearing slides, door hinges, floor glides, fabric (except for COM fabrics), seating foam, and wood veneer surfaces shall be limited to five (5) years. • The warranty for training tables shall be limited to three (3) years. • The warranty for engineered-to-order “custom” products shall be limited to three (3) years. • The warranty for height adjustable bases shall be limited to two (2) years on electrical components, five (5) years on mechanical components and ten (10) years on structural components. • This warranty does not cover: o Normal wear and tear. o The color fastness of any laminate, wood, or fabric, as such colors can fade or darken with normal use and as a result of exposure to light. o Customer’s Own Materials (COM). o Damage caused by placing anything other than hanging files in file drawers. o Rental furniture. o Labor and service.

Normal Usage:

This warranty does not apply to damages or failures resulting from misuse, abuse, negligence, or improper care. For casegoods, tables, and desking, normal usage is limited to 40 hours per week. For seating, normal usage is limited to 40 hours per week by individuals of 250 lbs. or less.

Limited Lifetime Warranty



Phone: 323.264.2260 | Fax: 323.725.6960www.deskmakers.com

Los AngelesDeskmakers Headquarters6525 Flotilla StreetCommerce, CA 90040

Showroom Locations

Documents

tables - DeskMakers Pricebook_1-29-20.pdf2020/01/29 · meeting and conference tables round square rectangular racetrack boatshape bow-end sightline top shapes: round, square, rectangular,