TABLES AND BASES - MTS Seating · 2018-12-13 · Table Top Options 9 Fold-a-Leaf® Tables 9 Flip Top Table Base 9 ®SureLock Table Latches TABLE OF CONTENTS Table Base Features and

TA B L E S A N D B A S E S

MTS offers a comprehensive line of hospitality seating and tables for any occasion. A certain liberty is granted to designers when

the possibilities are only limited by the imagination. That rare freedom is something you’ll find within MTS’ impressive line of

hospitality products.

We believe seating should inspire, complement and comfort. We believe that tables should be strong, functional and made with the

integrity to last. We also believe that all the products we create should be manufactured in environmentally responsible ways. At MTS,

we call this SynerGreen® – our guiding philosophy in minimizing our impact on the world around us.

Want more inspiration? Visit us at www.mtsseating.com or call 734-847-3875. A style for every style.

331 Square Maple Edge Table Top shownon a 4300 Reeded base.

260 SierraSolid Veneer Table Top shown on a 1500 Series base.

315 Bullnose Maple Edge Table Top shown on a 1400 Series Flat Steel Cross Series base.

261 SierraSolid® Roundover Edge Table Top on a 3400 Hobnail Series base.

3 | See more at www.mtsseating.com | ©2018 MTS Seating

Tables and Bases for Timeless Value

MTS is dedicated to designing and manufacturing high-performance table top and base products for the hospitality industry at the best value. It’s a standard of quality that’s unmatched, delivering a level of performance that truly stands out.

Our innovative styles not only look appealing to the eye, but also feel pleasing to the touch featuring a variety of curved, beveled and straight edges, ensuring that you’ll never run out of choices.

MTS table tops and bases come in many shapes and sizes to fit any application. Please refer to the specification chart for each product line to determine the products for your needs.

At MTS, we’re pleased to offer you seats at our tables. Standard shapes below.

Rectangle

Square

Round

1/4 Circle Booth Table


Table Bases11 1400 Steel Plate Cross11 1600 Steel Plate Edge11 8900 Plate Tapered Cross12 3000 Polished Chrome12 3300 Sundance12 3400 Hobnail13 3500 Checkerboard13 4300 Reeded13 1500 Cross14 CI Round with Decorative Collar14 CI Tri-Leg14 CI Cross 15 CI Round15 8700 Steel Plate Round15 8800 Steel Plate Square

Padded Table Tops4 202 Padded Top with Vinyl Bumper Edge4 205 Padded Top and Edge

Self Edge Table Tops4 210 1¼" Self Edge 4 211 1¾" Self Edge

Vinyl Bumper Edge Table Tops4 232 Vinyl Bumper Edge4 234 Vinyl Bumper Edge

Aluminum Edge Table Tops4 250 Satin Finish Aluminum Edge5 255 Polished FInish Aluminum Edge

SierraSolid® Table Tops5 260 Veneer Eased Edge5 261 Roundover Edge5 262 Ogee Edge5 264 Bullnose Edge5 265 Chamfer Edge6 266 Profile Eased Edge6 267 Profile Knife Edge

Wood Edge Table Tops6 311 1¼"x1¼" Square Maple Edge6 313 1¼"x1¼" Square Exposed Maple Edge6 315 1¼"x1¼" Bullnose Maple Edge6 321 1¾"x1¼" Bullnose Maple Edge7 330 1¼"x2½" Bullnose Maple Edge7 331 1¼"x2½" Square Maple Edge7 333 1¼"x2½" Reverse Knife Maple Edge7 350 1¼" Bullnose Birchply7 351 1¼" Knife Edge Birchply7 352 1¼" Reverse Knife Edge Birchply8 353 3/4" Slimline Bullnose Edge Birchply8 354 3/4" Slimline Knife Edge Birchply8 355 3/4" Slimline Eased Edge Birchply

Solid Wood Table Tops8 370, 371 & 372 1¼" Maple Butcher Block8 375, 376 & 377 1¾" Maple Butcher Block8 390 1¼" Maple Plank Style8 395 1¾" Maple Plank Style

Table Top Options9 Fold-a-Leaf® Tables9 Flip Top Table Base9 SureLock® Table Latches

T A B L E O F C O N T E N T S

Table Base Features and Options16 Table Shox® Automatic Self-adjusting Glides16 Laborsaver Bases

Custom shapes available as shown below. Contact MTS for more information.


Wall Mount Table Booth

1/2 Round Table

Rounded Square Table

Boat Table

V-Boat Table

Racetrack Oval


1¼" impact-resistant vinyl, slight bullnose bumper edge available in black or brown and unlimited laminate surface options. Please refer to the MTS Finish, Textile and Color Selector for available colors.Standard with 3½" radius corners. Square corners not available.

205

202 Padded Top with Vinyl Bumper Edge 210 1¼" Self Edge 211 1¾" Self Edge

All Table Tops Shown on this page:

shape Std. Max. Width Std. Max. Length

Square 48" 48"Rectangle 36" 96"Round 60" 60"Race Track Oval Contact MTSV-Boat Contact MTSCustom shapes and sizes available – contact MTS

202

Padded white vinyl top delivers superior acoustical performance. The 202 is standard with black impact- resistant vinyl protective edge which protects the padded surface. 3½" radius corners standard. The 205 delivers superior acoustical performance. Padded surface and edges are suited for any upscale venue. Square corners standard, 3½" radius corners are optional.

210211

Available in unlimited laminate options, and constructed with a premium-grade particleboard core. Square corners standard, 3½" radius corners optional.

Available in unlimited laminate options, and constructed with a premium-grade particleboard core. Square corners standard, 3½" radius corners optional.

232 Vinyl Bumper Edge 234 Vinyl Bumper Edge 250 Satin Finish Aluminum Edge

On Top of the DetailsEvery MTS table top is produced to exceed your expectations. You'll find our signature attention to detail, and dedicated workmanship in throughout every piece we design, manufacture, and sell.

205 Padded Top and Edge

232

1¼" impact-resistant vinyl, full bullnose bumper edge available in 12 color choices and unlimited laminate surface options. Please refer to the MTS Finish, Textile and Color Selector for available colors.Standard with 3½" radius corners. Square corners not available.

Great diner and retro look with satin finish, 1¼" aluminum edge, with unlimited laminate surface options. Standard with 3½" radius corners. Square corners not available.

232 250


255 Polished Finish Aluminum Edge 260 Veneer SierraSolid® Eased Edge 261 SierraSolid® Roundover Edge

232 Bumper Edge Table Top shown on a 3300 Series Base.

Great diner and retro look with polished finish, 1¼" aluminum edge, unlimited laminate surface options. Standard with 3½" radius corners. Square corners not available.

262 SierraSolid® Ogee Edge 264 SierraSolid® Bullnose Edge 265 SierraSolid® Chamfer Edge

SierraSolid table tops have an unmatched depth and consistency of color providing superior color retention, scratch resistance and cleanability. Our molded con-struction delivers a stronger, more durable, reinforced edge – reducing waste and cost as compared to tradi-tional solid-surface tabletops. Standard with 3" radius corners. Available in more than 70 colors.

SierraSolid table tops have an unmatched depth and consistency of color providing superior color retention, scratch resistance and cleanability. Our molded con-struction delivers a stronger, more durable, reinforced edge – reducing waste and cost as compared to traditional solid-surface tabletops. Standard with 3" radius corners. Available in more than 70 colors.



Square Sizes vary by style — contact MTSRectangle Sizes vary by style — contact MTSRound Sizes vary by style — contact MTSRace Track Oval Contact MTSV-Boat Contact MTSCustom shapes and sizes available – contact MTS

255261

262


264


265

Available in our most popular sizes, the eased edge SierraSolid veneer table tops feature an unmatched depth and consistency of color providing superior color retention, scratch resistance and cleanability. This top is an effective, affordable solution featuring a 1-1/4" solid surface edge and 1/4" veneer over a 3/4" exterior grade plywood core.

260


266 Profile SierraSolid® Eased Edge 267 Profile SierraSolid® Knife Edge 311 1¼"x1¼" Square Maple Edge

Featuring a 1¼" x 1¼" square exposed edge in Maple or optional Red Oak with trimmed laminate overlay. Available in unlimited laminate surface options. Square corner standard. Optional 3-1/2" radius corner available.

313 1¼" Square Exposed Maple Edge 315 1¼"x1¼" Bullnose Maple Edge 321 1¾"x1¼" Bullnose Maple Edge

Featuring 1¼" x 1¼" "picture frame" mitered corners with bullnose edge in Maple or optional Red Oak, and available in unlimited laminate surface options. Square corner standard. Optional 3 1/2" radius corner available.



Square Sizes vary by style — contact MTSRectangle Sizes vary by style — contact MTSRound Sizes vary by style — contact MTSRace Track Oval Contact MTSV-Boat Contact MTSCustom shapes and sizes available – contact MTS

315

Style that’s Right on the SurfaceIt’s easy to see why MTS tables are so popular. Whether it’s the fine grain patterns on our solid wood products or the delicately colored mosaics on our SierraSolid offerings, they just simply outshine others.

Featuring 1¼" x 1¼" "picture frame" mitered corners with eased edge in Maple or optional Red Oak, and available in unlimited laminate surface options. Square corner standard. Optional 3½" radius corner available.

311 210

313 210

Featuring 1¾" x 1¼" "picture frame" mitered corners with bullnose edge in Maple or optional Red Oak, and available in unlimited laminate surface options. Square corner standard. Optional 3½" radius corner available.

321

Featuring a 9/16” thick solid surface with a 3/4" of plywood substrate to mount table base, this eased edge SierraSolid tabletops feature an unmatched depth and consistency of color providing superior color retention, scratch resistance and cleanability. A popular solution for environments that call for versatile, rugged furniture design. 3½" radius corners optional.

266

Featuring a 9/16” thick solid surface with a 3/4" of plywood substrate to mount table base, this knife edge SierraSolid tabletops feature an unmatched depth and consistency of color providing superior color retention, scratch resistance and cleanability. A popular solution for environments that call for versatile, rugged furniture design. 3½" radius corners optional.

267


330 1¼"x2½" Bullnose Maple Edge 331 1¼"x2½" Square Maple Edge 333 1¼"x2½" Reverse Knife Maple Edge

311 Square Maple Edge Table Top shown on a CI Round Base.

Featuring 1¼" x 2½" "picture frame" mitered corners with eased edge in Maple or optional Red Oak, and available in unlimited laminate surface options. Square corner standard. Optional 3½" radius corner available.

350 1¼" Bullnose Edge Birchply 351 1¼" Knife Edge Birchply 352 1¼" Reverse Knife Edge Birchply

Featuring a 1¼" x 2½" reverse square knife edge design in Maple or optional Red Oak and available in unlimited laminate surface options. Square corner standard. Optional 3½" radius corner available.




330 331 333

Featuring design-inspired 1¼" 21 ply Baltic birchwood bullnose edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

Featuring design-inspired 1¼" 21 ply Baltic birchwood knife edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

Featuring design-inspired 1¼" 21 ply Baltic birchwood reverse knife edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

350 351 352

Featuring 1¼" x 2½" "picture frame" mitered corners with eased edge in Maple or optional Red Oak, and available in unlimited laminate surface options. Square corner standard. Optional 3½" radius corner available.


353 Slimline Bullnose Edge Birchply 354 Slimline Knife Edge Birchply 355 Slimline Eased Edge Birchply

Featuring design-inspired ¾" slimline 11 ply Baltic birchwood bullnose edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

Featuring design-inspired ¾" slimline 11 ply Baltic birchwood knife edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

Featuring design-inspired ¾" slimline 11 ply Baltic birchwood square eased edge with trimmed laminate overlay. Square corner standard. Optional 3½" radius corner available.

Manufactured with 1¼" wide continuous strips with no end-to-end joints. All lumber is air dried for a minimum of 90 days and then kiln dried to a moisture content of 6-8% prior to processing. Tops are finished with an ultra-violet cured top coat for an exceptionally hard, durable finish.

1¼" Maple Butcher Block 1¾" Maple Butcher Block 1¾" (top) & 1¼" Maple Plank Style

Manufactured with solid maple in 5" to 6" wide contin-uous planks and no end-to-end joints. All lumber is air dried for a minimum of 90 days and then kiln dried to a moisture content of 6-8% prior to processing. Tables are finished using a two-product polyurethane system for an exceptionally hard, durable finish.

Manufactured with 1¼" wide continuous strips with no end-to-end joints. All lumber is air dried for a minimum of 90 days and then kiln dried to a moisture content of 6-8% prior to processing. Tops are finished with an ultra-violet cured top coat for an exceptionally hard, durable finish.




353 354 355

370,371,372

370 371 372 390

375,376,377

376 377

375 Eased Edge Butcher Block Table Top shown on a CI Round Series Base.

370,371,372

370,371,372

375,376,377

375,376,377

375

370,371,372

375,376,377

395


Fold-A-Leaf® Table Tops

Flip Top Table Bases

SureLock® Table Latch

Fold-A-Leaf® Table Tops are perfect when flexibility is a must. Table leafs flip down to create a smaller square or rectangle table top for more intimate occasions. Available in four standard sizes square to round, and one standard size square to rectangle.

Fold-A-Leaf table tops are available in the following series styles:· 205 Series Padded· 210 Series Laminated Self Edge· 311 or 313 Series Square Maple Edge on center and outer leaf edges of table*· 311 Series Square Maple Edge on center of table and 315 Series Bullnose Maple Edge on outer leaf edges*· Maple may be replaced with optional Red Oak

*Inside edge of leaf finished in 210 Laminate

Custom sizes may be available on square to square, or square to rectangle tops.

Flip Top table bases are a must when tables are commonly moved or stored. Allowing for space-saving storage, and easy access for cleaning under tables. The Flip Top mechanism also comes in handy when trying to free up additional floorspace for events where tables are not needed.

The two-piece, 7 gauge, cold-rolled steel Flip Top mechansim connects securely to the metal base and wood top. When the top is attached to the base, it locks in position with a threaded knob for easy and secure attachment. Available on 2LS, 3LS and 4LS columns, with a maximum table size of 42" (round or square).

Flip Top Table Bases are available in removeable and non-removeable versions.

SureLock Table Latches are the quick, safe and easy way to connect tables. The heavy gauge steel lever and latch system, lines up and securely locks tables together, resulting in a single, sturdy, flat surface. Available only on square edge table tops, as well as models 202 and 232 (with a slight reveal). See our Workbook & Pricelist for availability.

Saving You a Seat As the leader in hospitality seating, it’s natural that MTS would round out our product lines with high-performance table tops and bases. It’s more than just meeting expectations; it’s exceeding them.

And that’s what we do every day.

333 Reverse Knife Edge Table Top shown on a 8700 Series Steel Plate base.

234 Vinyl Bumper Edge Table Top shown on a CI Round Base with a Decorative Collar

266 Profile SierraSolid® Eased Edge Table Top shown on a 3500 Checkerboard Series Base

313 Maple Edge Table Top shown on a Tri-Leg Series Base



1400 Steel Plate Cross

1600 Steel Plate Edge

8900 Steel Plate Tapered Cross

model base spread column diameter base height (±½")

1422-2LS 22”x22” 2” 28¾"1422-3LS*/-4LS 22”x22” 3"/4" 28¾"1426-2LS 26”x26” 2" 28¾"1426-3LS/-4LS 26”x26” 3"/4" 28¾"1433-2LS 33”x33” 2” 28¾"1433-3LS/-4LS 33”x33” 3"/4" 28¾"1436-2LS 36”x36” 2” 28¾"1436-3LS/-4LS 36”x36” 3"/4" 28¾"1423-2LS 22”x33” 2” 28¾"1423-3LS/-4LS 22”x33” 3"/4" 28¾"1463-2LS 26”x33” 2” 28¾"1463-3LS/-4LS 26”x33” 3"/4" 28¾"1466-2LS 33”x36” 2” 28¾"1466-3LS/-4LS 33”x36" 3"/4" 28¾"1422T-2LS 2-¼”x22” 2” 28¾"1426T-2LS 2-¼”x26” 2” 28¾"1433T2-2LS 2-¼”x33” 2” 28¾"1436T2-2LS 2-¼”x36” 2” 28¾"notes

* Shown at right in standard M-8 Quicksilver

Available in all MTS powdercoat finishes and optional plated finishes1

Custom heights available

All columns feature the MTS Laborsaver (LS) assembly

Better from the Ground UpOur table bases put style on solid ground, providing a foundation for enhanced form and function. It’s all about creating the solutions you want at the value you need.

And that’s all about MTS. 255 Polished Aluminum Edge Table Top shown on a 3000 Series Base.


1622-3* 22”x22” 3” 28¾"1626-3 26”x26” 3” 28¾"1633-3 33”x33” 3” 28¾"1636-3 36”x36” 3” 28¾"1623-3 22”x33” 3” 28¾"1663-3 26”x33” 3” 28¾"1666-3 26”x36” 3” 28¾"1622T-2 2”x22” 2” 28¾"1622T-3 3”x22” 3” 28¾"1626T-2 2”x26” 2” 28¾"1626T-3 3”x26” 3” 28¾"1633T2-2 2”x33” 2” 28¾"1633T2-3 3”x33” 3” 28¾"1636T2-2 2”x36” 2” 28¾"1636T2-3 3”x36” 3” 28¾"notes



All columns welded to bases and shipped assembled


8922-2LS 22”x22” 2” 28¾"8922-3LS*/-4LS 22”x22” 3”/4" 28¾"8926-2LS 26”x26” 2” 28¾"8926-3LS/-4LS 26”x26” 3”/4" 28¾"8933-2LS 33”x33” 2” 28¾"8933-3LS/-4LS 33”x33” 3”/4" 28¾"8936-2LS 36”x36” 2” 28¾"8936-3LS/-4LS 36”x36” 3”/4" 28¾"8923-2LS 22”x33” 2” 28¾"8923-3LS/-4LS 22”x33” 3”/4" 28¾"8963-2LS 26”x33” 2” 28¾"8963-3LS/-4LS 26”x33” 3”/4" 28¾"8966-2LS 26”x36” 2" 28¾"8966-3LS/-4LS 26”x36” 3”/4" 28¾"8922T-2LS 2-¼”x22” 2” 28¾"8926T-2LS 2-¼”x26” 2” 28¾"8933T2-2LS 2-¼”x33” 2” 28¾"8936T2-2LS 2-¼”x36” 2” 28¾"notes





1 Visit mtsseating.com/plated for plated finish options

including Chrome, Satin Nickel Chrome, Satin Brass,

and Architectural Bronze


3000 Polished Chrome

3300 Sundance


3017-3LS* 17" dia. 3" 28¾"3022-3LS 22" dia. 3" 28¾"3022-SU3 22" dia. 3" 40¾"3022-SU4 22" dia. 4" 40¾"notes

* Available in C-1 Chrome only




3317-2LS* 17" dia. 2" 28¾"3317-3LS 17" dia. 3" 28¾"3322-3LS 22" dia. 3" 28¾"3330-4LS 30" dia. 4" 28¾"3322-SU3 22" dia. 3" 40¾"3322-SU4 22" dia. 4" 40¾"3330-SU4 30" dia. 4" 40¾"notes

* Shown at left in standard V-4 Midnight

Available in all MTS powdercoat finishes



352 Knife Edge Table Top shown on a 4300 Reeded Series Base.

Keep Your Options OpenMTS 2LS, 3LS and 4LS table base columns feature our Laborsaver assembly as well as additional options that might come as welcome surprises.

Sometimes it’s the smallest things that make the biggest difference.

3400 Hobnail model base spread column diameter base height (±½")

3418-2LS* 18" dia. 2" 28¾"3422-3LS 22" dia. 3" 28¾"3428-3LS 28" dia. 3" 28¾"3422-SU3 22" dia. 3" 40¾"3428-SU4 28" dia. 4" 40¾"notes

* Shown at left in optional OW-3 Aged Bronze





3500 Checkerboardmodel base spread column diameter base height (±½")

3517-2LS 17" dia. 2" 28¾"3522-3LS* 22" dia. 3" 28¾"3530-4LS 30" dia. 4" 28¾"3522-SU3 22" dia. 3" 40¾"3530-SU4 30" dia. 4" 40¾"notes

* Shown at right in standard M8 Quicksilver.

Available in all MTS powdercoat finishes.



331 Maple Edge Table Top shown on a CI Round Base with a Decorative Collar.

4300 Reededmodel base spread column diameter base height (±½")

4318-2LS* 18"x18" 2" 28¾"4322-2LS 22"x22" 2" 28¾"4330-2LS 30"x30" 2" 28¾"4323-2LS 22"x30" 2" 28¾"4340-2LS/7 40"x40" 4- ea. 2" 28¾"4302-2LS 3"x22" 2" 28¾"notes

* Shown at right in optional OW-1 Old Penny





1518-2LS* 18"x18" 2" 28¾"1522-2LS 22"x22" 2" 28¾"1523-2LS 22"x28" 2" 28¾"1530-2LS 28"x28" 2" 28¾"1502-2LS 2"x22" 2" 28¾"1532-2LS 2"x32" 2- ea. 2" 28¾"notes

* Shown at right in optional Satin Nickel Chrome




1500 Cross





CI Tr-Leg

CI Cross


CI-17R-3LS-DC* 17" dia. 3" 28¾"CI-22R-3LS-DC 22" dia. 3" 28¾"CI-22R-SU3-DC 22" dia. 3" 40¾"notes

* Shown at left in standard V-4 Midnight with M-8 Quicksilver collar

Base and collar available in all MTS powdercoat finishes




CI-22T-3LS* 22" dia. 3" 28¾"CI-22T-4LS 22" dia. 4" 28¾"CI-27T-3LS 27" dia. 3" 28¾"CI-27T-4LS 27" dia. 4" 28¾"notes


Available in all MTS powedercoat finishes



210 Self Edge Table Top shown on a CI Tri-Leg Base

CI Round with Decorative Collar

Bases You Can Take to the BankFor table bases that stand up to any test, turn to MTS. We’ve supplied hospitality table and seating solutions for thousands of customers across the country and around the world for more than 60 years.

And we can do the same for you.


CI-22-3LS* 22"x22" 3" 28¾"CI-22-4LS 22"x22" 4" 28¾"CI-30-3LS 30"x30" 3" 28¾"CI-30-4LS 30"x30" 4" 28¾"CI-30-SU3 30"x30" 3" 40¾"CI-30-SU4 30"x30" 4" 40¾"CI-36-4LS 36"x30" 4" 28¾"CI-2230-3LS 22" X 30" 3" 28¾"CI-2230-4LS 22" X 30" 4" 28¾"CI-522-3LS 5" X 22" 3" 28¾"CI-522-4LS 5" X 22" 4" 28¾"notes






CI Round

8800 Steel Plate Square

8700 Steel Plate Roundmodel base spread column diameter base height (±½")

8718-3LS* 18” dia. 3” 28¾"8722-3LS 22” dia. 3” 28¾"8722-SU3 22” dia. 3” 40¾"8722-SU4 22” dia. 4” 40¾"notes


Available in all MTS powdercoat finishes and optional plated finishes



210 Self Edge Table Top shown on a CI Cross Base.


CI-17R-2LS 17" dia. 2" 28¾"CI-17R-3LS* 17" dia. 3" 28¾"CI-17R-4LS 17" dia. 4" 28¾"CI-22R-3LS 22" dia. 3" 28¾"CI-22R-4LS 22" dia. 4" 28¾"CI-28R-4LS 28" dia. 4" 28¾"CI-22R-SU3 22" dia. 3" 40¾"CI-22R-SU4 22" dia. 4" 40¾"CI-28R-SU4 28" dia. 4" 40¾"notes

* Shown at right in standard V-4 Midnight





8818-3LS* 18”x18" 3” 28¾"8822-3LS 22”x22" 3” 28¾"8822-SU3 22”x22" 3” 40¾"8822-SU4 22”x22" 4” 40¾"notes








Table Shox are automatic, hydraulic table glides that self-adjust every time your table is moved to help solve uneven floor problems.

These optional hydraulic glides replace manual screw in/out table glides. The enclosed small shock absorbers automatically adjust to uneven floor surfaces.

• Automatically re-adjust up to 5/16" each time the table is moved• Keeps all contact points touching the floor• Corrects for uneven or irregular surface up to 5/16"• Functions with an internal hydraulic mechanism• Made of high quality steel, polyurethane, and impact-resistant nylon• 400 lb. load capacity per set of 4

Optional Table Shox™ Automatic Adjusting Glides

All MTS Laborsaver bases feature steel top plates welded 360° with a 2" base bolt welded directly to the column. Our 2", 3" and 4" round columns feature a 16"x16", deep drawn, 12-gauge top plate. Simply place the base over the base bolt, attached the lock washer and nut, and your Labrosaver Base assembly is complete. The conventional base typically takes up to 5 minutes to unpackage and assemble versus the Laborsaver Base, which can take as little as 60 seconds to complete!

The MTS Representative in your area is:

Tables and Bases

MTS Seating7100 Industrial DriveTemperance, MI 48182734-847-3875FAX: 800-329-0687mtsseating.com

Soy-based inks used in printing | ©2018 MTS Seating MTSS048-1218-HW5000

MTS Seating is sensitive to the impact of our manufacturing on the world around us. That’s why we developed and adopted the SynerGreen® philosophy to make continuous environmental improvements in our processes and products, while practicing sound business principles to focus on satisfying customer needs. In addition, MTS is proud to be the first hospitality banquet seating manufacturer to earn the GREENGUARD® Indoor Air Quality Certification on our line of stacking, banquet and restaurant seating, and in 2014, MTS received Sustainability Leader status with the MindClick Global Hospitality Sustainability Index.

Visit our website at mtsseating.com to find out more about our SynerGreen program and for the big picture in turnkey solutions for every seating setting.

Discover performance engineering, ergonomics today’s hospitality industry demands, and the design impact to make a lasting statement – whimsical to romantic, retro to regal.

December 2018C

Table Shox

Laborsaver Bases

Documents

TABLES AND BASES - MTS Seating · 2018-12-13 · Table Top Options 9 Fold-a-Leaf® Tables 9 Flip Top Table Base 9 ®SureLock Table Latches TABLE OF CONTENTS Table Base Features and