150

Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of
Page 2: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Table

of

Con

ten

tsULITM Steel Surface Cable Trunking

Type: UL/TG/ST 4

ULITM Steel Perforated Cable Tray

Type: UL/TU/ST 13

Type: UL/TT/ST or UL/TC/ST 22

Type: UL/TR/ST 34

ULITM Steel Cable Ladder

Type: UL/LZ/ST 53

Type: UL/LN/ST 77

Type: UL/LG/ST 101

Type: UL/LC/ST 125

Table of Contents

Copyright © 2003 by United U-LI Corporation BerhadAll Rights Reserved

Page 3: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

History

Since its modest beginning in 1983, United U-LI Corporation has developed into a prominent and respected supplier of cablemanagement and structural support systems inthe ASEAN region.

In April 2002, the company was listed in theKuala Lumpur Stock Exchange, thus, being thefirst company in the cable support industry inMalaysia to do so.

Where we are

Located in Balakong, Selangor, the three-acrefactory is well-equipped with state-of-the-artmachinery to provide guaranteed internationallyapproved products to customers. Operatingthrough its sales office in Selangor, Johor Bahruand agents in Singapore, the company is nowable to provide sales and technical services throughout the ASEAN region.

Company Background

What we do

United U-LI is the leading manufacturer ofcable support systems in Malaysia. We specialize in the design and manufacturing ofa wide range of cable support systems. Ourproducts are designed and manufacturedunder the Quality Sytems that complies withthe ISO 9001:2000 and Sirim Quality System.United U-LI's cable support system also meetsthe required International Standards such asBS4678, SS249:1998 and NEMA-VE1.

Projects

Over the years, products manufactured byUnited U-LI have been widely used in the various sectors of economics such asInternational Airports, Petrochemical,Waterworks, Commercial Buildings, PowerPlants and Railway transport systems. Being areputed company and a reliable supplier is further manifested by the ability to supply toInternational companies such as AlstomPacific, Alstom UK, Bechtel US, ABB, Siemens,Sime Darby Group and many others.

Page 4: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

U-LITM range of Steel Surface Cable Trunking, Cable Ducting and Accessories

Steel Surface Cable Trunking

U-LITM

STRAIGHT TRUNKING

INSIDE RISER

STRAIGHT TRUNKING

EQUAL CROSS

RIGHT REDUCER

LEFT REDUCER

EQUAL TEE

ELBOW

STRAIGHT REDUCER

OUTSIDE RISER

RANGE OF STEEL SURFACE CABLE TRUNKING,

CABLE DUCTING AND ACCESSORIES.

3

Page 5: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

ø3

ø4 X 9 Slot

Trunking Body

Coupler

2440

ø3

ø8

Trunking Cover

H

80

COVER FIXTURE

W

1. By 6 x 10 Self Tapping Screw

2. By Turnbuckle (See Drawing)

Coupler Fixture

Slotted Pan Head Screw

and Flat Washer

M6 x 12 with Hex Nut

Steel Surface Cable Trunking-Straight

Type: UL/TG/STUnited U-LI Steel Surface Cable Trunking andAccessories are Certified to SS 249:1981 (Part BS 4678) by SIRIM QAS International Sdn BhdCERTIFICATION No: Pu 010901

TYPE 1 SPECIFICATION CLASSIFICATION PROTECTION MATERIAL COATING FINISH (BOTH SIDES)Manufactured to SS 249:1981 Class 1 Medium Electro Galvanised to BS 1706/Zn 2 Epoxy Powder Coated

SS 249 : 1981 SS 249:1981 Class 2 Heavy Pre-Galvanised to BS 2989. Grade Z 275 Epoxy Powder Coated

TYPE 2 SPECIFICATION CLASSIFICATION PROTECTION MATERIAL COATING FINISHManufactured to BS 4678:Pt1:1971 Class 1 LIght Electro Galvanised to BS 1706/Zn 2 None

BS 4678: Part 1:1971 BS 4678:Pt1:1971 Class 2 Medium Electro Galvanised to BS 1706/Zn 2 Light Epoxy Coating

Externally Only

BS 4678:Pt1:1971 Class 3 Heavy Pre-Galvanised to BS 2989. Grade Z 275 None

TYPE 3 SPECIFICATION PROTECTION MATERIAL FINISHManufactured to Hot Dip Galvanised to Very Heavy Hot Roll Steel to JISG 3131 SPHC Hot Dip Galvanised

high corrosion BS EN ISO 1461:1999(E) or with Epoxy/Polyester Coat

resistance over it upon request

TYPE 4 SPECIFICATION PROTECTION MATERIAL FINISHManufactured to Stainless Steel Extra Heavy Stainless Steel AISI None

very high corrosion and 304, 316 or 316L or with Epoxy/Polyester Coat

resistance & strength Heavy Duty over it upon request

Dimension in Millimetre

4

Page 6: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Steel Surface Cable Trunking

Standard Sizes For Type 1 and 2

Nominal Size Nominal Thickness Of Nominal Thickness OfComponents Ref. (mm) Body Material Cover Material

H (Height) x W (Width) (mm) (mm)

UL/TG/ST - 1 / 2 25 X 50 1.0 1.0

UL/TG/ST - 2 / 2 50 X 50 1.0 1.0

UL/TG/ST - 2 / 3 50 X 75 1.2 1.2

UL/TG/ST - 3 / 3 75 X 75 1.2 1.2

UL/TG/ST - 2 / 4 50 X 100 1.2 1.2

UL/TG/ST - 3 / 4 75 X 100 1.2 1.2

UL/TG/ST - 4 / 4 100 X 100 1.4 1.2

UL/TG/ST - 2 / 5 50 X 125 1.4 1.2

UL/TG/ST - 2 / 6 50 X 150 1.4 1.2

UL/TG/ST - 3 / 6 75 X 150 1.4 1.2

UL/TG/ST - 4 / 6 100 X 150 1.4 1.2

UL/TG/ST - 6 / 6 150 X 150 1.4 1.2

UL/TG/ST - 2 / 7 50 X 175 1.4 1.2

UL/TG/ST - 4 / 7 100 X 175 1.4 1.4

UL/TG/ST - 2 / 8 50 X 200 1.6 1.4

UL/TG/ST - 3 / 8 75 X 200 1.6 1.4

UL/TG/ST - 4 / 8 100 X 200 1.6 1.4

UL/TG/ST - 6 / 8 150 X 200 1.6 1.4

UL/TG/ST - 2 / 9 50 X 225 1.6 1.4

UL/TG/ST - 2 / 10 50 X 250 1.6 1.4

UL/TG/ST - 2 / 11 50 X 275 1.6 1.4

UL/TG/ST - 2 / 12 50 X 300 1.6 1.4

UL/TG/ST - 3 / 12 75 X 300 1.6 1.4

UL/TG/ST - 4 / 12 100 X 300 1.6 1.4

UL/TG/ST - 2 / 14 50 X 350 1.6 1.4

Preferred length 2.44m, minimum 2m, maximum 3m.

The sizes, body, cover gauges and preferred lengths of trunking as indicated in the above table are specified under BS 4678:Part

1:1971 and SS 249:1981.

For other classification the above table could be use as a guide.

5

Page 7: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Steel Surface Cable Trunking

Cable Steel Trunking - Accessories

When ordering please indicate W (width), H (height) and Finish.

W1 W2W2W1

W1 W2

H

W

H

W

H

Type: UL/TG/A-1

Horizontal Cross with Cover

Type: UL/TG/A-2

Horizontal Tee with Cover

90º Horizontal Elbow with Cover

Type: UL/TG/A-3 Type: UL/TG/A-4

45º Horizontal Elbow with Cover

Type: UL/TG/A-5

90º Internal Riser with Cover45º Internal Riser with Cover

W H

Type: UL/TG/A-6

6

Page 8: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

H

WW

H

H

WA

H

WA

WA

H

H

A W

90º Horizontal Offset with Cover

45º Horizontal Offset with Cover

45º External Riser with Cover

Type: UL/TG/A-8

Type: UL/TG/A-10

Type: UL/TG/A-12

Type: UL/TG/A-7

Type: UL/TG/A-11

Type: UL/TG/A-9

90º Horizontal Offset with Cover

(right)

45º Horizontal Offset with Cover

(right)

90º External Riser with Cover

(left)

(left)

Steel Surface Cable Trunking

Steel Surface Trunking - Accessories

When ordering please indicate W (width), H (height), A (length) and Finish.

7

Page 9: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Steel Surface Cable Trunking

Steel Surface Trunking - Accessories

Knockout

Type: UL/TG/A-15 Type: UL/TG/A-16

Type: UL/TG/A-14Type: UL/TG/A-13

Type: UL/TG/A-17 Type: UL/TG/A-18

H

W2

W1W

H

Straight Reducer with Cover Pier Set

Earth Link

290

W

Minimum

100 mm

Minimum

100 mm

W

290

Minimum

100 mm

W

290

Single Socket PlateDouble Socket Plate

Twin Socket Plate

A1

A2

20mm and 25mm Diameter

Knockout

Type: UL/TG/A-21

When ordering please indicate W (width), H (height), A (length) and Finish.

8

Page 10: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Components Ref. Trunking Width Number Of Fastener Per 2.44m Length Finish

UL/TG/TB3-1 50 3 Pcs Hot Dip Galvanised

UL/TG/TB3-2 75 3 Pcs Epoxy or Polyester Coated

UL/TG/TB3-3 100 3 Pcs Stainless

Dimension in Millimetre

Steel Surface Cable Trunking

Single Turnbuckle Cover Fastener

TRUNKING BODY

TRUNKING COVER

TURNBUCKLE BLADE

TURNBUCKLE STUD

TO LOCK TURN SLOT PERPENDICULAR TO COVER.

TURN CLOCK OR ANTI-CLOCKWISE TO LOCK OR UNLOCK.

Trunking with Turnbuckle Fastener and Cover

When ordering please indicate Type, Width, Height and Finish.

9

Page 11: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Components Ref. Trunking Width Number Of Fastener Per 2.44m Length Finish

Hot Dip Galvanised

UL/TG/TB6 125 to 300 6 Pcs Epoxy or Polyester Coated

Stainless

Dimension in Millimetre

Steel Surface Cable Trunking

Double Turnbuckle Cover Fastener

TO LOCK TURN SLOT PERPENDICULAR TO COVER.

TO LOCK OR UNLOCK.

TURNBUCKLE STUD

TURN CLOCK OR ANTI CLOCKWISE

TURNBUCKLE BLADE

TRUNKING COVER

TRUNKING BODY

Trunking with Turnbuckle Fastener and Cover

When ordering please indicate Type, Width, Height and Finish.

10

Page 12: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

LEFT

RED

UC

ER

EQU

AL

TEE

ROU

ND

ED T

YPE

90

B

END

RO

UN

DED

TYP

E

INTE

RNA

L RI

SER

ROU

ND

ED T

YPE

EXTE

RNA

L RI

SER

ROU

ND

ED T

YPE

EQU

AL

CRO

SS R

OU

ND

ED T

YPE

90

EL

BO

W A

NG

ULA

R TY

PE

INTE

RNA

L RI

SER

AN

GU

LAR

TYPE

EXTE

RNA

L RI

SER

AN

GU

LAR

TYPE

EQU

AL

TEE

AN

GU

LAR

TYPE

EQU

AL

CRO

SS A

NG

ULA

R TY

PE

RIG

HT

RED

UC

ER

STRA

IGH

T RE

DU

CER

STRA

IGH

T C

AB

LE T

RAY

END

CA

P

11

Steel Perforated Cable Tray

U-LITM Steel Cable Tray Typical Layout

Page 13: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

12

U-LITM Steel Cable Tray Product Range Perforated Tray Series

U-LITM design of Cable Ladder is compact and fast toinstall, with both straight Cable Tray and all accessorieshaving a unique integrated coupling system.

U-LITM offers a wide range of options to suit your designand with load rated to NEMA VE1. We also manufactureCable Tray to your design.

U-LITM offers multi side wall profile for your design needsand applications. It has the advantage of quick on siteinstallation, cut to length and reconnection.

U-LITM offers a wide range of materials to suit the sitecondition and also choices of final finishes.

Materials:

1. Hot roll mild steel. JISG 3131 SPHC, JISG 3101 SS4002. Cold roll mild steel. JISG 3141 SPCC3. Pre-Galvanised steel. BS 29894. Electro-Galvanised. BS 1449 Pt 1:19835. Stainless steel. AISI 304, 316 or 316L6. Aluminium.

Materials thickness range from 1mm thick to 3mm thick.

Finishing:

1. Hot dip galvanised.ASTM A123, BS EN ISO 1461:1999

2. Epoxy coated - ASTM D 1654, BS 69203. Polyester coated - ASTM D 1654, BS 6920

Steel Perforated Cable Tray

Standard Slots Configuration. Total removal of material approximately 18%. We also manufacture to other slot configurationsas per customer’s request

Page 14: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

13

Steel Perforated Cable Tray - StraightType: UL/TU/ST

Dimension in Millimetre Abbreviation. W - Width H - Height L - Length

When ordering please indicate Material, Finish (F) and Length (L)We also supply other sizes with the same profile.

ø8

ø8 x 18

SLOTS DETAILTRAY SECTION

H

L

W

W

H

30

30

Components Ref. H W Thickness L Finish

UL/TU/ST-10 25 700 2.0

UL/TU/ST-11 25 800 2.0

UL/TU/ST-12 25 900 2.0

UL/TU/ST-13 25 1000 2.0

Ho

t Dip

Galvan

ised

Epo

xy or Po

lyester Co

ated

Stainless

24

40

or 3

00

0

Components Ref. H W Thickness L Finish

UL/TU/ST-1 13 50 1.5

UL/TU/ST-2 13 100 1.5

UL/TU/ST-3 13 150 1.5

UL/TU/ST-4 17 200 1.5

UL/TU/ST-5 17 300 1.5

UL/TU/ST-6 20 350 1.5

UL/TU/ST-7 20 450 1.5

UL/TU/ST-8 25 500 1.5

UL/TU/ST-9 25 600 1.5

Ho

t Dip

Galvan

ised

Epo

xy or Po

lyester Co

ated

Stainless

24

40

or 3

00

0

Steel Perforated Cable Tray

Page 15: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

14

R

W 100

90º

Standard Radius 300100

H

H

45º

RStandardRadius 300 100100

W

Steel Perforated Cable Tray - 900 ElbowType: UL/TU/EL90

Steel Perforated cable Tray - 450 ElbowType: UL/TU/EL45

R

W 100

90º

Standard Radius 300100

H

H

45º

RStandardRadius 300 100100

W

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and Sizes as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and Sizes as straight cable tray please also indicate Radius (R)

Steel Perforated Cable Tray

Page 16: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

15

H

W100

90º

R

100Standard Radius 300W

W100

Standard Radius 300

90º

R

100

W1

H

H

W100

90º

R

100Standard Radius 300W

W100

Standard Radius 300

90º

R

100

W1

H

Steel Perforated Cable Tray - Horizontal Equal TeeType: UL/TU/ET

Steel Perforated Cable Tray - Horizontal Unequal TeeType: UL/TU/UT

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and Sizes as straight cable tray please also indicate Radius (R) and Width (W1)

Steel Perforated Cable Tray

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and Sizes as straight cable tray please also indicate Radius (R)

Page 17: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

16

H

W

R

90º

100100 Standard Radius 300W1

W100Standard Radius 300

90º

R

100

H

W1

H

W

R

90º

100100 Standard Radius 300W1

W100Standard Radius 300

90º

R

100

H

W1

Steel Perforated Cable Tray - Horizontal Equal CrossType: UL/TU/EC

Steel Perforated Cable Tray - Horizontal Unequal CrossType: UL/TU/UC

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and Sizes as straight cable tray please also indicate Radius (R) and Width (W1)

Steel Perforated Cable Tray

Page 18: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

17

Steel Perforated Cable Tray

Steel Perforated Cable Tray - External RiserType: UL/TU/ER

W

100

RStandard

Radius 300

100

H

W

10

0

90º

R

90º

Standard

Radius 300

100

H

W

100

RStandard

Radius 300

100

H

W

10

0

90º

R

90º

Standard

Radius 300

100

H

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Steel Perforated Cable Tray - Internal RiserType: UL/TU/IR

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Page 19: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

18

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Right Offset ReducerType: UL/TU/SD

W1

W2

300

100

100

H

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and Sizes as straight cable tray please also indicate Width (W2)

Page 20: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

19

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Right Offset ReducerType: UL/TU/RR

300

W2

100

A1

100

A1

H

100

300

100

H

W2

300

W2

100

A1

100

A1

H

100

300

100

H

W2

Steel Perforated Cable Tray - Left Offset ReducerType: UL/TU/LR

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and Sizes as straight cable tray please also indicate Width (W2)

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and Sizes as straight cable tray please also indicate Width (W2)

Page 21: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

20

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Splice PlateType: UL/TU/HS

150

W

ø8 X 50

Rd Head Slotted Screw

M6 x 12 With Hex Nut

And Flat Washer

Total 4 Sets per connection

Components Ref. W Finish Application

Splice Plate and Fixture

Application

UL/TU/HS Perforated Tray Width

Minus 6mm

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Applicable to:

Straight Trays, Elbows and Risers

Dimension in Millimetre

When ordering please indicate straight cable tray Width.

Page 22: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

21

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Accessories Angular Type

W1

100

WA

100

A

100

W

100

A100100

W

HH

WA

100 100

W

W

100

A

100

H

W

A

HH

100

10

0

Type: UL/TU/AT-3

Type: UL/TU/AT-5 Type: UL/TU/AT-6

Type: UL/TU/AT-4

Type: UL/TU/AT-1 Type: UL/TU/AT-2

Components Ref. H A W-W1

50 100

75 100

100 100

150 150

Dimension in Millimetre

UL/TU/AT Width

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Page 23: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

22

TRAY SECTION

W

H

13

ø8 x 18

ø8

CONNECTION SLOT DETAIL

TRAY SECTION

W

H

W

H

L

7.5mm Sq

44

20

30

30

Type: UL/TC/STType: UL/TT/ST

20

Steel Perforated Cable Tray

Steel Perforated Cable Tray - StraightType: UL/TT/ST or UL/TC/ST

Page 24: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

23

Steel Perforated Cable Tray

Steel Perforated Cable Tray - StraightType: UL/TT/ST or UL/TC/ST

Dimension in MillimetreAbbreviation. W - Width H - Height L - Length T - Thickness

When ordering please indicate Type, Material, Finish and Length (L)We also supply other sizes with the same Cable Tray profile.

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

24

40

or 3

00

0

Components Ref. H W Thickness L FinishUL/TT/ST or UL/TC/ST/2-2 50 50 1.5UL/TT/ST or UL/TC/ST/2-4 50 100 1.5UL/TT/ST or UL/TC/ST/2-6 50 150 1.5UL/TT/ST or UL/TC/ST/2-8 50 200 1.5UL/TT/ST or UL/TC/ST/2-10 50 250 1.5UL/TT/ST or UL/TC/ST/2-12 50 300 1.5UL/TT/ST or UL/TC/ST/2-14 50 350 1.5UL/TT/ST or UL/TC/ST/2-16 50 400 1.5UL/TT/ST or UL/TC/ST/2-18 50 450 2.0UL/TT/ST or UL/TC/ST/2-20 50 500 2.0UL/TT/ST or UL/TC/ST/2-22 50 550 2.0UL/TT/ST or UL/TC/ST/2-24 50 600 2.0UL/TT/ST or UL/TC/ST/2-26 50 650 2.0UL/TT/ST or UL/TC/ST/2-28 50 700 2.0UL/TT/ST or UL/TC/ST/2-30 50 750 2.0UL/TT/ST or UL/TC/ST/2-34 50 850 2.0UL/TT/ST or UL/TC/ST/2-36 50 900 2.0UL/TT/ST or UL/TC/ST/2-38 50 950 2.0UL/TT/ST or UL/TC/ST/2-40 50 1000 2.0UL/TT/ST or UL/TC/ST/3-3 75 75 1.5UL/TT/ST or UL/TC/ST/3-4 75 100 1.5UL/TT/ST or UL/TC/ST/3-6 75 150 1.5UL/TT/ST or UL/TC/ST/3-8 75 200 1.5UL/TT/ST or UL/TC/ST/3-10 75 250 1.5UL/TT/ST or UL/TC/ST/3-12 75 300 1.5UL/TT/ST or UL/TC/ST/3-14 75 350 1.5UL/TT/ST or UL/TC/ST/3-16 75 400 1.5UL/TT/ST or UL/TC/ST/3-18 75 450 2.0UL/TT/ST or UL/TC/ST/3-20 75 500 2.0UL/TT/ST or UL/TC/ST/3-22 75 550 2.0UL/TT/ST or UL/TC/ST/3-24 75 600 2.0UL/TT/ST or UL/TC/ST/3-26 75 650 2.0UL/TT/ST or UL/TC/ST/3-28 75 700 2.0UL/TT/ST or UL/TC/ST/3-30 75 750 2.0UL/TT/ST or UL/TC/ST/3-34 75 850 2.0UL/TT/ST or UL/TC/ST/3-36 75 900 2.0UL/TT/ST or UL/TC/ST/3-38 75 950 2.0UL/TT/ST or UL/TC/ST/3-40 75 1000 2.0UL/TT/ST or UL/TC/ST/4-4 100 100 1.5UL/TT/ST or UL/TC/ST/4-6 100 150 1.5UL/TT/ST or UL/TC/ST/4-8 100 200 1.5UL/TT/ST or UL/TC/ST/4-10 100 250 1.5UL/TT/ST or UL/TC/ST/4-12 100 300 1.5UL/TT/ST or UL/TC/ST/4-14 100 350 2.0UL/TT/ST or UL/TC/ST/4-16 100 400 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

24

40

or 3

00

0

Components Ref. H W Thickness L FinishUL/TT/ST or UL/TC/ST/4-18 100 450 2.0UL/TT/ST or UL/TC/ST/4-20 100 500 2.0UL/TT/ST or UL/TC/ST/4-22 100 550 2.0UL/TT/ST or UL/TC/ST/4-24 100 600 2.0UL/TT/ST or UL/TC/ST/4-26 100 650 2.0UL/TT/ST or UL/TC/ST/4-28 100 700 2.0UL/TT/ST or UL/TC/ST/4-30 100 750 2.0UL/TT/ST or UL/TC/ST/4-32 100 800 2.0UL/TT/ST or UL/TC/ST/4-34 100 850 2.0UL/TT/ST or UL/TC/ST/4-36 100 900 2.0UL/TT/ST or UL/TC/ST/4-38 100 950 2.0UL/TT/ST or UL/TC/ST/4-40 100 1000 2.0UL/TT/ST or UL/TC/ST/5-6 125 150 1.5UL/TT/ST or UL/TC/ST/5-8 125 200 1.5UL/TT/ST or UL/TC/ST/5-10 125 250 1.5UL/TT/ST or UL/TC/ST/5-12 125 300 1.5UL/TT/ST or UL/TC/ST/5-14 125 350 2.0UL/TT/ST or UL/TC/ST/5-16 125 450 2.0UL/TT/ST or UL/TC/ST/5-18 125 450 2.0UL/TT/ST or UL/TC/ST/5-20 125 500 2.0UL/TT/ST or UL/TC/ST/5-22 125 550 2.0UL/TT/ST or UL/TC/ST/5-24 125 600 2.0UL/TT/ST or UL/TC/ST/5-26 125 650 2.0UL/TT/ST or UL/TC/ST/5-28 125 700 2.0UL/TT/ST or UL/TC/ST/5-30 125 750 2.0UL/TT/ST or UL/TC/ST/5-32 125 800 2.0UL/TT/ST or UL/TC/ST/5-34 125 850 2.0UL/TT/ST or UL/TC/ST/5-36 125 900 2.0UL/TT/ST or UL/TC/ST/5-38 125 950 2.0UL/TT/ST or UL/TC/ST/6-6 150 150 1.5UL/TT/ST or UL/TC/ST/6-8 150 200 1.5UL/TT/ST or UL/TC/ST/6-10 150 250 1.5UL/TT/ST or UL/TC/ST/6-12 150 300 1.5UL/TT/ST or UL/TC/ST/6-14 150 350 2.0UL/TT/ST or UL/TC/ST/6-16 150 400 2.0UL/TT/ST or UL/TC/ST/6-18 150 450 2.0UL/TT/ST or UL/TC/ST/6-20 150 500 2.0UL/TT/ST or UL/TC/ST/6-22 150 550 2.0UL/TT/ST or UL/TC/ST/6-24 150 600 2.0UL/TT/ST or UL/TC/ST/6-26 150 650 2.0UL/TT/ST or UL/TC/ST/6-28 150 700 2.0UL/TT/ST or UL/TC/ST/6-30 150 750 2.0UL/TT/ST or UL/TC/ST/6-32 150 800 2.0UL/TT/ST or UL/TC/ST/6-34 150 850 2.0UL/TT/ST or UL/TC/ST/6-36 150 900 2.0

Page 25: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

24

H

100

R

100W

90º

H

100R

W

100

45º

Standard Radius 300

Standard Radius 300

H

100

R

100W

90º

H

100R

W

100

45º

Standard Radius 300

Standard Radius 300

Steel Perforated Cable Tray

Steel Perforated Cable Tray - 900 ElbowType: UL/TT/EL90 or UL/TC/EL90

Steel Perforated Cable Tray - 450 ElbowType: UL/TT/EL45 or UL/TC/EL45

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Page 26: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

25

100

W

W

120º

RStandard Radius 300

100W

100

H

W1Standard Radius 300100

90º

R

H

100

W

W

120º

RStandard Radius 300

100W

100

H

W1Standard Radius 300100

90º

R

H

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Equal TeeType: UL/TT/ET or UL/TC/ET

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Steel Perforated Cable Tray - Horizontal Unequal TeeType: UL/TT/UT or UL/TC/UT

Page 27: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

26

Steel Perforated Cable Tray

Steel Perforated Cable Tray - External RiserType: UL/TT/ER or UL/TC/ER

W

H

10

0

100

R

90ºStandard

Radius 300

W

100

R90º

100

Radius 300

Standard

H

W

H

10

0

100

R

90ºStandard

Radius 300

W

100

R90º

100

Radius 300

Standard

H

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Type, Material and Finish as straight cable tray please also indicate Radius (R)

Steel Perforated Cable Tray - Internal RiserType: UL/TT/IR or UL/TC/IR

Page 28: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

27

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Straight Offset ReducerType: UL/TT/SR or UL/TC/SR

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Type, Material and Finish as straight cable tray please also indicate Width (W2)

W2

W1

H

100

300

100

Page 29: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

28

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Splice PlateType: UL/TT/HS or UL/TC/HS

H

10

ø7 X 20159

Total 4 Sets per connection

And Flat Washer

Cup Head Sq Neck Screw

M6 x 20 With Hex Nut

40

44

44

Components Ref. Steel Perforated Tray Height H Finish

UL/TT/HS or UL/TC/HS-2 50 34

UL/TT/HS or UL/TC/HS-3 75 59

UL/TT/HS or UL/TC/HS-4 100 84

UL/TT/HS or UL/TC/HS-6 150 134

Dimension in Millimetre

Splice Plate and Fixture

Application

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 30: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Components Ref. Steel Perforated Tray Height H Finish

UL/TT/VS or UL/TC/VS-2 50 34

UL/TT/VS or UL/TC/VS-3 75 59

UL/TT/VS or UL/TC/VS-4 100 84

UL/TT/VS or UL/TC/VS-6 150 134

Dimension in Millimetre

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

29

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Vertical Adjustable Splice PlateType: UL/TT/VS or UL/TC/VS

M6 X 20 With Hex Nut And Flat Washer

Total 4 Sets per connection

Total 1 Set per connection

With Hex Nut And Flat Washer

Hex Screw M8 x 16

Cup Head Sq Neck Screw

ø10

159

ø7 X 20

10

H

80

15.5

44

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Splice Plate and Fixture

Application

Page 31: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Components Ref. Steel Perforated Tray Height H Finish

UL/TT/HP or UL/TC/HP-2 50 34

UL/TT/HP or UL/TC/HP-3 75 59

UL/TT/HP or UL/TC/HP-4 100 84

UL/TT/HP or UL/TC/HP-6 150 134

Dimension in Millimetre

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

30

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Adjustable Splice PlateType: UL/TT/HP or UL/TC/HP

90º

10

H

250

ø8 x 18

ø7 x 100

Total 2 Sets per connection

And Flat Washer

M6 x 20 With Hex Nut

Cup Head Sq Neck Screw

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Splice Plate and Fixture

Application

Page 32: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

31

Steel Perforated Cable Tray

Steel Perforated Cable Tray - End CapType: UL/TT/EP or UL/TC/EP

H

80

And Flat Washer

Cup Head Sq Neck Screw

M6 x 20 With Hex Nut

W

Total 4 Sets per connection

Components Ref. Steel Perforated Tray Height H W Finish

UL/TT/EP or UL/TC/EP-1 50 46

UL/TT/EP or UL/TC/EP-2 75 71 To Fit Cable Tray With

UL/TT/EP or UL/TC/EP-3 100 96 2mm Clearance

UL/TT/EP or UL/TC/EP-4 150 146

Dimension in Millimetre

Abbreviation. W - Width H - Height

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

End Cap and Fixture

Application

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 33: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

32

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Straight CoverType: UL/TT/SC or UL/TC/SC

L1

J HOOK DETAIL

M6

M6 Hex Nut

Flat Washer

APPLICATION

W

W1

'J' Hook

21 X 40 Channel

L

W

CABLE TRAY AND COVER SECTION

30

12

COVER

14

Overlap

14

Components Ref. W W1 Thickness L Finish

UL/TT/SC-1 150 158 1.5

UL/TT/SC-2 200 208 1.5

UL/TT/SC-3 250 258 1.5

UL/TT/SC-4 300 308 1.5

UL/TT/SC-5 150 158 1.5

UL/TT/SC-6 200 208 1.5

UL/TT/SC-7 250 258 1.5

UL/TT/SC-8 300 308 1.5

UL/TT/SC-9 150 158 2.0

UL/TT/SC-10 200 208 2.0

UL/TT/SC-11 250 258 2.0

UL/TT/SC-12 300 308 2.0

UL/TT/SC-13 400 408 2.0

UL/TT/SC-14 450 458 2.0

UL/TT/SC-15 500 508 2.0

UL/TT/SC-16 600 608 2.0

UL/TT/SC-17 750 758 2.0

UL/TT/SC-18 900 908 2.0

UL/TT/SC-19 1000 1008 2.0

UL/TT/SC-20 200 208 2.0

Cover

15

00

or 3

00

0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. W W1 Thickness L Finish

UL/TT/SC-21 250 258 2.0

UL/TT/SC-22 300 308 2.0

UL/TT/SC-23 400 408 2.0

UL/TT/SC-24 450 458 2.0

UL/TT/SC-25 500 508 2.0

UL/TT/SC-26 600 608 2.0

UL/TT/SC-27 750 758 2.0

UL/TT/SC-28 900 908 2.0

UL/TT/SC-29 1000 1008 2.0

UL/TT/SC-30 200 208 2.0

UL/TT/SC-31 250 258 2.0

UL/TT/SC-32 300 308 2.0

UL/TT/SC-33 400 408 2.0

UL/TT/SC-34 450 458 2.0

UL/TT/SC-35 500 508 2.0

UL/TT/SC-36 600 608 2.0

UL/TT/SC-37 750 758 2.0

UL/TT/SC-38 800 808 2.0

UL/TT/SC-39 900 908 2.0

UL/TT/SC-40 1000 1008 2.0

15

00

or 3

00

0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. Description L1

UL/TT/CMP Cable Ladder Cover Clamp To Fit Cable Ladder Height

Dimension in Millimetre

When ordering please indicate Length (L)

and Finish.

Page 34: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

33

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Accessories Angular Type

A

A

100

W

W

H

W

100

H

A

H

W

H

H

100100

W

A

100

100100

100

H

100

A

AW

100

W1

100

W1

100

Type: UL/TT/AT-6Type: UL/TT/AT-5

Type: UL/TT/AT-3

Type: UL/TT/AT-1

Type: UL/TT/AT-4

Type: UL/TT/AT-2

Components Ref. H A W-W1

50 100

75 100

100 100

150 150

Dimension in Millimetre

UL/TT/AT Width

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Page 35: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

34

TRAY SECTION

CONNECTION SLOT DETAIL

ø8

ø8 x 18

L

W

H

44

20

7.5mm Sq

10

W

12

30

30

Steel Perforated Cable Tray

Steel Perforated Cable Tray - StraightType: UL/TR/ST

Dimension in Millimetre

Page 36: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

35

Components Ref. H W Thickness L FinishUL/TR/ST/4-18 100 450 2.0UL/TR/ST/4-20 100 500 2.0UL/TR/ST/4-22 100 550 2.0UL/TR/ST/4-24 100 600 2.0UL/TR/ST/4-26 100 650 2.0UL/TR/ST/4-28 100 700 2.0UL/TR/ST/4-30 100 750 2.0UL/TR/ST/4-32 100 800 2.0UL/TR/ST/4-34 100 850 2.0UL/TR/ST/4-36 100 900 2.0UL/TR/ST/4-38 100 950 2.0UL/TR/ST/4-40 100 1000 2.0UL/TR/ST/5-6 125 150 1.5UL/TR/ST/5-8 125 200 1.5UL/TR/ST/5-10 125 250 1.5UL/TR/ST/5-12 125 300 1.5UL/TR/ST/5-14 125 350 2.0UL/TR/ST/5-16 125 400 2.0UL/TR/ST/5-18 125 450 2.0UL/TR/ST/5-20 125 500 2.0UL/TR/ST/5-22 125 550 2.0UL/TR/ST/5-24 125 600 2.0UL/TR/ST/5-26 125 650 2.0UL/TR/ST/5-28 125 700 2.0UL/TR/ST/5-30 125 750 2.0UL/TR/ST/5-32 125 800 2.0UL/TR/ST/5-34 125 850 2.0UL/TR/ST/5-36 125 900 2.0UL/TR/ST/5-38 125 950 2.0UL/TR/ST/6-6 150 150 1.5UL/TR/ST/6-8 150 200 1.5UL/TR/ST/6-10 150 250 1.5UL/TR/ST/6-12 150 300 1.5UL/TR/ST/6-14 150 350 2.0UL/TR/ST/6-16 150 400 2.0UL/TR/ST/6-18 150 450 2.0UL/TR/ST/6-20 150 500 2.0UL/TR/ST/6-22 150 550 2.0UL/TR/ST/6-24 150 600 2.0UL/TR/ST/6-26 150 650 2.0UL/TR/ST/6-28 150 700 2.0UL/TR/ST/6-30 150 750 2.0UL/TR/ST/6-32 150 800 2.0UL/TR/ST/6-34 150 850 2.0UL/TR/ST/6-36 150 900 2.0

Components Ref. H W Thickness L FinishUL/TR/ST/2-2 50 50 1.5UL/TR/ST/2-4 50 100 1.5UL/TR/ST/2-6 50 150 1.5UL/TR/ST/2-8 50 200 1.5UL/TR/ST/2-10 50 250 1.5UL/TR/ST/2-12 50 300 1.5UL/TR/ST/2-14 50 350 1.5UL/TR/ST/2-16 50 400 1.5UL/TR/ST/2-18 50 450 2.0UL/TR/ST/2-20 50 500 2.0UL/TR/ST/2-22 50 550 2.0UL/TR/ST/2-24 50 600 2.0UL/TR/ST/2-26 50 650 2.0UL/TR/ST/2-28 50 700 2.0UL/TR/ST/2-30 50 750 2.0UL/TR/ST/2-34 50 850 2.0UL/TR/ST/2-36 50 900 2.0UL/TR/ST/2-38 50 950 2.0UL/TR/ST/2-40 50 1000 2.0UL/TR/ST/3-3 75 75 1.5UL/TR/ST/3-4 75 100 1.5UL/TR/ST/3-6 75 150 1.5UL/TR/ST/3-8 75 200 1.5UL/TR/ST/3-10 75 250 1.5UL/TR/ST/3-12 75 300 1.5UL/TR/ST/3-14 75 350 1.5UL/TR/ST/3-16 75 400 1.5UL/TR/ST/3-18 75 450 2.0UL/TR/ST/3-20 75 500 2.0UL/TR/ST/3-22 75 550 2.0UL/TR/ST/3-24 75 600 2.0UL/TR/ST/3-26 75 650 2.0UL/TR/ST/3-28 75 700 2.0UL/TR/ST/3-30 75 750 2.0UL/TR/ST/3-34 75 850 2.0UL/TR/ST/3-36 75 900 2.0UL/TR/ST/3-38 75 950 2.0UL/TR/ST/3-40 75 1000 2.0UL/TR/ST/4-4 100 100 1.5UL/TR/ST/4-6 100 150 1.5UL/TR/ST/4-8 100 200 1.5UL/TR/ST/4-10 100 250 1.5UL/TR/ST/4-12 100 300 1.5UL/TR/ST/4-14 100 350 2.0UL/TR/ST/4-16 100 400 2.0

24

40

or 3

00

0

Ho

t Dip

Galvan

ised Ep

oxy o

r Polyester C

oated

- Stainless

24

40

or 3

00

0

Ho

t Dip

Galvan

ised Ep

oxy o

r Polyester C

oated

- Stainless

Steel Perforated Cable Tray

Steel Perforated Cable Tray - StraightType: UL/TR/ST

Dimension in Millimetre Abbreviation. W - Width H - Height L - Length

We also supply other sizes with the same Cable Tray profile.

Page 37: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

36

Steel Perforated Cable Tray

Steel Perforated Cable Tray - 900 ElbowType: UL/TR/EL90

100100

90º

R

H

W

H

45º

W

100100

Standard Radius 300

Standard Radius 300R

100100

90º

R

H

W

H

45º

W

100100

Standard Radius 300

Standard Radius 300R

Steel Perforated Cable Tray - 450 ElbowType: UL/TR/EL45

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Page 38: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

37

Standard Radius 300

Standard Radius 300

H

100

R

100

W W

H

W1100

W

100

90º

R

120º

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Equal TeeType: UL/TR/ET

Steel Perforated Cable Tray - Horizontal Unequal TeeType: UL/TR/UT

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R) and Width (W1)

Standard Radius 300

Standard Radius 300

H

100

R

100

W W

H

W1100

W

100

90º

R

120º

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Page 39: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

38

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Equal CrossType: UL/TR/EC

H

w100

90º

R

Standard Radius 300100W

H

100

90º

Standard Radius 300

R

100

W

W1

H

w100

90º

R

Standard Radius 300100W

H

100

90º

Standard Radius 300

R

100

W

W1

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R) and Width (W1)

Steel Perforated Cable Tray - Horizontal Unequal CrossType: UL/TR/UC

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Page 40: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

39

Steel Perforated Cable Tray

Steel Perforated Cable Tray - External RiserType: UL/TR/ER

W

100

10

0

H

W

10

0

100

H

R90º

Standard

Radius 300

90º

R

Standard

Radius 300

W

100

10

0

H

W

10

0

100

H

R90º

Standard

Radius 300

90º

R

Standard

Radius 300

Steel Perforated Cable Tray - Internal RiserType: UL/TR/IR

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Dimension in MillimetreAbbreviation. W - Width H - Height R - Radius

When ordering Material, Finish and sizes as straight cable tray please also indicate Radius (R)

Page 41: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

40

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Right Offset ReducerType: UL/TR/RR

100

100

W2

W1

500

H

W1

W2

100

300

100

H

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and sizes as straight cable tray please also indicate Width (W2)

Steel Perforated Cable Tray - Left Offset ReducerType: UL/TR/LR

100

100

W2

W1

500

H

W1

W2

100

300

100

H

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and sizes as straight cable tray please also indicate Width (W2)

Page 42: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

41

Steel Perforated Cable Tray

Steel Perforated Tray - Straight Offset ReducerType: UL/TR/SR

Dimension in MillimetreAbbreviation. W - Width H - Height

When ordering Material, Finish and sizes as straight cable tray please also indicate Width (W2)

100

300

100

H

W1

W1

Page 43: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

42

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Splice PlateType: UL/TR/HS

Components Ref. Steel Perforated Tray Height H Finish

UL/TR/HS-2 50 34

UL/TR/HS-3 75 59

UL/TR/HS-4 100 84

UL/TR/HS-6 150 134

Dimension in MillimetreAbbreviation. H - Height

Material and Finish as Straight Cable Tray

159

H

10

Cup Head Sq Neck Screw

And Flat Washer

Total 4 Sets per Connection.

ø7 X 20

M6 x 20 With Hex Nut

40

44

44

Application

Splice Plate and Fixture

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 44: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

43

Steel Perforated Cable Tray

Components Ref. Steel Perforated Tray Height H Finish

UL/TR/VS-2 50 34

UL/TR/VS-3 75 59

UL/TR/VS-4 100 84

UL/TR/VS-6 150 134

Dimension in MillimetreAbbreviation. H - Height

Material and Finish as Straight Cable Tray

159

H

10

ø10

Hex Screw M8 x 16

With Hex Nut And Flat Washer

Total 1 Set per Connection

Cup Head Sq Neck Screw

Total 4 Sets per Connection

ø7 X 20

M6 X 20 With Hex Nut And Flat Washer

44

15.5

80

Application

Splice Plate and Fixture

Steel Perforated Cable Tray - Vertical Adjustable Splice PlateType: UL/TR/VS

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 45: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

44

Cup Head Sq Neck Screw

M6 x 20 With Hex Nut

And Flat Washer

Total 2 Sets per Connection

250

H

10

ø7 x 100

90º

Application

Splice Plate and Fixture

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Horizontal Adjustable Splice PlateType: UL/TR/HP

Components Ref. Steel Perforated Tray Height H Finish

UL/TR/HP-2 50 34

UL/TR/HP-3 75 59

UL/TR/HP-4 100 84

UL/TR/HP-6 150 134

Dimension in MillimetreAbbreviation. H - Height

Material and Finish as Straight Cable Tray

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 46: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

45

Steel Perforated Cable Tray

Steel Perforated Cable Tray - End CapType: UL/TR/EP

Components Ref. Steel Perforated Tray Height H W Finish

UL/TR/EP-2 50 46

UL/TR/EP-3 75 71 To Fit Cable Tray With

UL/TR/EP-4 100 96 2mm Clearance

UL/TR/EP-6 150 146

Dimension in Millimetre

Abbreviation. W - Width H - Height

M6 x 20 With Hex Nut

Cup Head Sq Neck Screw

And Flat Washer

80

H

Total 4 Sets per End Plate

W

Application

End Cap and Fixture

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

Page 47: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

46

L1

APPLICATION

'J' Hook

21 X 40 Channel

Flat Washer

M6 Hex Nut

(Stainless Steel)

(Stainless Steel)

M6(Stainless Steel)

J HOOK DETAIL

L

W

W

W1

14

CABLE TRAY AND COVER SECTION

Overlap

12

30COVER

14

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Straight CoverType: UL/TR/SC

Components Ref. W W1 Thickness L Finish

UL/TR/SC-1 150 158 1.5

UL/TR/SC-2 200 208 1.5

UL/TR/SC-3 250 258 1.5

UL/TR/SC-4 300 308 1.5

UL/TR/SC-5 150 158 1.5

UL/TR/SC-6 200 208 1.5

UL/TR/SC-7 250 258 1.5

UL/TR/SC-8 300 308 1.5

UL/TR/SC-9 150 158 2.0

UL/TR/SC-10 200 208 2.0

UL/TR/SC-11 250 258 2.0

UL/TR/SC-12 300 308 2.0

UL/TR/SC-13 400 408 2.0

UL/TR/SC-14 450 458 2.0

UL/TR/SC-15 500 508 2.0

UL/TR/SC-16 600 608 2.0

UL/TR/SC-17 750 758 2.0

UL/TR/SC-18 900 908 2.0

UL/TR/SC-19 1000 1008 2.0

UL/TR/SC-20 200 208 2.0

15

00

or 3

00

0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. W W1 Thickness L Finish

UL/TR/SC-21 250 258 2.0

UL/TR/SC-22 300 308 2.0

UL/TR/SC-23 400 408 2.0

UL/TR/SC-24 450 458 2.0

UL/TR/SC-25 500 508 2.0

UL/TR/SC-26 600 608 2.0

UL/TR/SC-27 750 758 2.0

UL/TR/SC-28 900 908 2.0

UL/TR/SC-29 1000 1008 2.0

UL/TR/SC-30 200 208 2.0

UL/TR/SC-31 250 258 2.0

UL/TR/SC-32 300 308 2.0

UL/TR/SC-33 400 408 2.0

UL/TR/SC-34 450 458 2.0

UL/TR/SC-35 500 508 2.0

UL/TR/SC-36 600 608 2.0

UL/TR/SC-37 750 758 2.0

UL/TR/SC-38 800 808 2.0

UL/TR/SC-39 900 908 2.0

UL/TR/SC-40 1000 1008 2.0

15

00

or 3

00

0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. Description L1

UL/TR/CMP Cable Ladder Cover Clamp To Fit Cable Ladder HeightDimension in Millimetre

When ordering please indicate Length (L) and

Finish.

Page 48: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

47

Steel Perforated Cable Tray

Steel Perforated Cable Tray - Accessories Angular Type

W

W100100

W

100 100

AA

100 100

W

H

100 100

W1

H

W1

100

100100

100

HW

A

A

A

W

H

A

H

H

Type: UL/TR/AT-4

Type: UL/TR/AT-6

Type: UL/TR/AT-3

Type: UL/TR/AT-5

Type: UL/TR/AT-2Type: UL/TR/AT-1

Components Ref. H A W-W1

50 100

75 100

100 100

150 150

Dimension in Millimetre

UL/TR/AT Width

When ordering please indicate Type, Finish and Sizes as in straight cable tray.

Page 49: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

48

Steel Perforated Cable Tray

Page 50: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

49

Steel Cable Ladder

ULITM Steel Cable Ladder Typical Layout

END PLATE

EXTERNAL RISER

INTERNAL RISER

RIGHT REDUCER

LEFT REDUCER

EQUAL TEE

EQUAL CROSS

STRAIGHT REDUCER

ELBOW

STRAIGHT LADDER

VERTICAL TEE

Page 51: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

50

40 40 40

Section Cable Ladder

Side Rail Series

Type: Type:

Type:Type:

LZ LG

LCLN

Section Rungs Profile

24 24

20

20

22

7

Type: Type:Type:R1 R2 R3

Rung Slot Options

ø8 x 20mm Slots25mm CentresStandard Profile

Type: S2ø8 x 20mm Slots25mm Centres

Type: S3Type: S1ø8 x 75mm Slots100mm Centres

U-LITM Cable Ladder Product Range

U-LITM design of Cable Ladder is compact and fast toinstall, with both straight Cable Ladder and all acces-sories having a unique integrated coupling system.

U-LITM offers a wide range of options to suit your designand with load rated to NEMA VE1. We also manufactureExtra Heavy Duty Cable Ladder upon request.

U-LITM offers multi side rails, rungs and slots profile foryour design needs and applications. It has the advan-tage of quick on site installation, cut to length andreconnection.

U-LITM offers a wide range of materials to suit the sitecondition and also choices of final finishes.

Materials:1. Hot roll mild steel. JISG 3131 SPHC2. Cold roll mild steel. JISG 3141 SPCC - SD3. Pre-Galvanised Steel BS 2989 or JISG 3302 SGCC4. Electro-Galvanised. BS 1449 Pt 1:19835. Stainless steel. AISI 304, 316 or 316L6. Aluminium.

Materials thickness range from 1mm thick to 3mm thick.

Finishing:1. Hot dip galvanised.

ASTM A123, BS EN ISO 1461:19992. Epoxy coated - ASTM D 1654, BS 69203. Polyester coated - ASTM D 1654, BS 6920

Steel Cable Ladder

Page 52: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

51

Loading Graphs

Steel Cable Ladder

50mm Height x 300mm Width x 3000mm Length x 1.5mm Thick

0 20 40 60 80 100 120

0

10

20

30

40

Applied load (Kg)

Defle

ction

(mm

)

CABLE LADDER

140 160

280

75mm Height x 300mm Width x 3000mm Length x 1.5mm Thick

160140120100806040200 180 200 220 240 260

Defle

ction

(mm

)

30

20

10

0

CABLE LADDER

Applied load (Kg)

300 400 500

100mm Height x 300mm Width x 3000mm Length x 2.0mm Thick

Applied load (Kg)

28024016012080400 200 320 360 400 440 480

CABLE LADDER

0

Defle

ction

(mm

)

5

10

15

520 560

125mm Height x 300mm Width x 3000mm Length x 2.0mm Thick

Applied load (Kg)

0 100 200 300 400 500 600

15

0

10

5

Defle

ction

(mm

)

CABLE LADDER

700

150mm Height x 300mm Width x 3000mm Length x 2.0mm Thick

Applied load (Kg)

0 100 200 300 400 500

Defle

ction

(mm

)

0

5

CABLE LADDER

10

600

The graphs indicate deflection and save working loadsfor continuous horizontal runs, the cable ladder upperlimits on each graph shows the maximum working loadfor the ladder on the given span. For information onloads and deflection in these circumstances furtheradvice should be sought from United U-LITM.

These test were carried out using cable ladder Type:LZmanufactured from mild steel. The use of other steelswill cause variation to this data and further advise onthis should be requested from United U-LITM. The testwere conducted to NEMA VE1 specification and verifiedby SIRIM Qas International Sdn Bhd.

Page 53: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

52

Steel Cable Ladder

1000900800700600500400300

Applied load (Kg)

CABLE LADDER

1000

0

10

20

30

40

Defle

ction

(mm

)

200

100mm Height x 600mm Width x 3000mm Length x 2.0mm Thick

900800700600500400300

CABLE LADDER

Applied load (Kg)

1000

Defle

ction

(mm

)

20

10

0

200

125mm Height x 600mm Width x 3000mm Length x 2.0mm Thick

300 400 500 600 700 800 900

Applied load (Kg)

CABLE LADDER

1000

0

Defle

ction

(mm

)

5

10

15

200

150mm Height x 600mm Width x 3000mm Length x 2.0mm Thick

11001000800 900700600500400300

Applied load (Kg)

CABLE LADDER

30

200100

20

10

0

0

Defle

ction

(mm

)

100mm Height x 900mm Width x 3000mm Length x 2.0mm Thick

1300120011001000900800700600500400

Applied load (Kg)

CABLE LADDER

200100

0

10

20

30

0

Defle

ction

(mm

)

300

125mm Height x 900mm Width x 3000mm Length x 2.0mm Thick

1200300 400 500 600 700 900800 1000 1100

CABLE LADDER

Applied load (Kg)

10

20

100 200

Defle

ction

(mm

)

0

150mm Height x 900mm Width x 3000mm Length x 2.0mm Thick

Page 54: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

53

CONNECTION SLOT DETAIL

CONNECTION SLOT DETAIL

RUNG DETAIL

For 50mm and 75mm heightCable Ladder

For 100mm - 125mm - 150mm heigthCable Ladder

SIDE RAIL SECTION

20

20

12H

22

w

45

B2

45

22

Standard Spacing 25ø8 X 20

24

40

W

L

B1

H

ø9 x 18

ø9 x 18

Steel Cable Ladder - StraightType: UL/LZ/ST

Components Ref. H W B1 B2 L Thickness Finish

UL/LZ/ST/2-6 50 150 150 300 3000 1.5

UL/LZ/ST/2-8 50 200 150 300 3000 1.5

UL/LZ/ST/2-10 50 250 150 300 3000 1.5

UL/LZ/ST/2-12 50 300 150 300 3000 1.5

UL/LZ/ST/3-6 75 150 150 300 3000 1.5

UL/LZ/ST/3-8 75 200 150 300 3000 1.5

UL/LZ/ST/3-10 75 250 150 300 3000 1.5

UL/LZ/ST/3-12 75 300 150 300 3000 1.5

UL/LZ/ST/4-6 100 150 150 300 3000 2.0

UL/LZ/ST/4-8 100 200 150 300 3000 2.0

UL/LZ/ST/4-10 100 250 150 300 3000 2.0

UL/LZ/ST/4-12 100 300 150 300 3000 2.0

UL/LZ/ST/4-16 100 400 150 300 3000 2.0

UL/LZ/ST/4-18 100 450 150 300 3000 2.0

UL/LZ/ST/4-20 100 500 150 300 3000 2.0

UL/LZ/ST/4-24 100 600 150 300 3000 2.0

UL/LZ/ST/4-30 100 750 150 300 3000 2.0

UL/LZ/ST/4-36 100 900 150 300 3000 2.0

UL/LZ/ST/4-40 100 1000 150 300 3000 2.0

UL/LZ/ST/5-8 125 200 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. H W B1 B2 L Thickness Finish

UL/LZ/ST/5-10 125 250 150 300 3000 2.0

UL/LZ/ST/5-12 125 300 150 300 3000 2.0

UL/LZ/ST/5-16 125 400 150 300 3000 2.0

UL/LZ/ST/5-18 125 450 150 300 3000 2.0

UL/LZ/ST/5-20 125 500 150 300 3000 2.0

UL/LZ/ST/5-24 125 600 150 300 3000 2.0

UL/LZ/ST/5-30 125 750 150 300 3000 2.0

UL/LZ/ST/5-36 125 900 150 300 3000 2.0

UL/LZ/ST/5-40 125 1000 150 300 3000 2.0

UL/LZ/ST/6-8 150 200 150 300 3000 2.0

UL/LZ/ST/6-10 150 250 150 300 3000 2.0

UL/LZ/ST/6-12 150 300 150 300 3000 2.0

UL/LZ/ST/6-16 150 400 150 300 3000 2.0

UL/LZ/ST/6-18 150 450 150 300 3000 2.0

UL/LZ/ST/6-20 150 500 150 300 3000 2.0

UL/LZ/ST/6-24 150 600 150 300 3000 2.0

UL/LZ/ST/6-30 150 750 150 300 3000 2.0

UL/LZ/ST/6-32 150 800 150 300 3000 2.0

UL/LZ/ST/6-36 150 900 150 300 3000 2.0

UL/LZ/ST/6-40 150 1000 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height L - Length W - Width

When ordering please indicate Material and Finish.We also supply other sizes with the same Side Rail, Rung Profile and various number of Connection Slots.

Steel Cable Ladder

Page 55: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

54

Steel Cable Ladder - 900 ElbowType: UL/LZ/EL90

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/EL90/2-6 50 150

UL/LZ/EL90/2-8 50 200

UL/LZ/EL90/2-10 50 250

UL/LZ/EL90/2-12 50 300

UL/LZ/EL90/3-6 75 150

UL/LZ/EL90/3-8 75 200

UL/LZ/EL90/3-10 75 250

UL/LZ/EL90/3-12 75 300

UL/LZ/EL90/4-6 100 150

UL/LZ/EL90/4-8 100 200

UL/LZ/EL90/4-10 100 250

UL/LZ/EL90/4-12 100 300

UL/LZ/EL90/4-16 100 400

UL/LZ/EL90/4-18 100 450

UL/LZ/EL90/4-20 100 500

UL/LZ/EL90/4-24 100 600

UL/LZ/EL90/4-30 100 750

UL/LZ/EL90/4-36 100 900

UL/LZ/EL90/4-40 100 1000

UL/LZ/EL90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/EL90/5-10 125 250

UL/LZ/EL90/5-12 125 300

UL/LZ/EL90/5-16 125 400

UL/LZ/EL90/5-18 125 450

UL/LZ/EL90/5-20 125 500

UL/LZ/EL90/5-24 125 600

UL/LZ/EL90/5-30 125 750

UL/LZ/EL90/5-36 125 900

UL/LZ/EL90/5-40 125 1000

UL/LZ/EL90/6-8 150 200

UL/LZ/EL90/6-10 150 250

UL/LZ/EL90/6-12 150 300

UL/LZ/EL90/6-16 150 400

UL/LZ/EL90/6-18 150 450

UL/LZ/EL90/6-20 150 500

UL/LZ/EL90/6-24 150 600

UL/LZ/EL90/6-30 150 750

UL/LZ/EL90/6-32 150 800

UL/LZ/EL90/6-36 150 900

UL/LZ/EL90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

90º150W 150

H

R

B

Mid-section

Page 56: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

55

W

45º

150

H

150R

Mid-SectionB

Steel Cable Ladder - 450 ElbowType: UL/LZ/EL45

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/EL45/2-6 50 150

UL/LZ/EL45/2-8 50 200

UL/LZ/EL45/2-10 50 250

UL/LZ/EL45/2-12 50 300

UL/LZ/EL45/3-6 75 150

UL/LZ/EL45/3-8 75 200

UL/LZ/EL45/3-10 75 250

UL/LZ/EL45/3-12 75 300

UL/LZ/EL45/4-6 100 150

UL/LZ/EL45/4-8 100 200

UL/LZ/EL45/4-10 100 250

UL/LZ/EL45/4-12 100 300

UL/LZ/EL45/4-16 100 400

UL/LZ/EL45/4-18 100 450

UL/LZ/EL45/4-20 100 500

UL/LZ/EL45/4-24 100 600

UL/LZ/EL45/4-30 100 750

UL/LZ/EL45/4-36 100 900

UL/LZ/EL45/4-40 100 1000

UL/LZ/EL45/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/EL45/5-10 125 250

UL/LZ/EL45/5-12 125 300

UL/LZ/EL45/5-16 125 400

UL/LZ/EL45/5-18 125 450

UL/LZ/EL45/5-20 125 500

UL/LZ/EL45/5-24 125 600

UL/LZ/EL45/5-30 125 750

UL/LZ/EL45/5-36 125 900

UL/LZ/EL45/5-40 125 1000

UL/LZ/EL45/6-8 150 200

UL/LZ/EL45/6-10 150 250

UL/LZ/EL45/6-12 150 300

UL/LZ/EL45/6-16 150 400

UL/LZ/EL45/6-18 150 450

UL/LZ/EL45/6-20 150 500

UL/LZ/EL45/6-24 150 600

UL/LZ/EL45/6-30 150 750

UL/LZ/EL45/6-32 150 800

UL/LZ/EL45/6-36 150 900

UL/LZ/EL45/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 57: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

56

W2

90º

150

RW1

150

H

B

Steel Cable Ladder - Horizontal Equal TeeType: UL/LZ/ET

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/ET/2-6 50 150 150

UL/LZ/ET/2-8 50 200 200

UL/LZ/ET/2-10 50 250 250

UL/LZ/ET/2-12 50 300 300

UL/LZ/ET/3-6 75 150 150

UL/LZ/ET/3-8 75 200 200

UL/LZ/ET/3-10 75 250 250

UL/LZ/ET/3-12 75 300 300

UL/LZ/ET/4-6 100 150 150

UL/LZ/ET/4-8 100 200 200

UL/LZ/ET/4-10 100 250 250

UL/LZ/ET/4-12 100 300 300

UL/LZ/ET/4-16 100 400 400

UL/LZ/ET/4-18 100 450 450

UL/LZ/ET/4-20 100 500 500

UL/LZ/ET/4-24 100 600 600

UL/LZ/ET/4-30 100 750 750

UL/LZ/ET/4-36 100 900 900

UL/LZ/ET/4-40 100 1000 1000

UL/LZ/ET/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/ET/5-10 125 250 250

UL/LZ/ET/5-12 125 300 300

UL/LZ/ET/5-16 125 400 400

UL/LZ/ET/5-18 125 450 450

UL/LZ/ET/5-20 125 500 500

UL/LZ/ET/5-24 125 600 600

UL/LZ/ET/5-30 125 750 750

UL/LZ/ET/5-36 125 900 900

UL/LZ/ET/5-40 125 1000 1000

UL/LZ/ET/6-8 150 200 200

UL/LZ/ET/6-10 150 250 250

UL/LZ/ET/6-12 150 300 300

UL/LZ/ET/6-16 150 400 400

UL/LZ/ET/6-18 150 450 450

UL/LZ/ET/6-20 150 500 500

UL/LZ/ET/6-24 150 600 600

UL/LZ/ET/6-30 150 750 750

UL/LZ/ET/6-32 150 800 800

UL/LZ/ET/6-36 150 900 900

UL/LZ/ET/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 58: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

57

W1

150

R

W2

90º150

H

B

Steel Cable Ladder - Unequal TeeType: UL/LZ/UT

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/UT/2-6 50 150

UL/LZ/UT/2-8 50 200

UL/LZ/UT/2-10 50 250

UL/LZ/UT/2-12 50 300

UL/LZ/UT/3-6 75 150

UL/LZ/UT/3-8 75 200

UL/LZ/UT/3-10 75 250

UL/LZ/UT/3-12 75 300

UL/LZ/UT/4-6 100 150

UL/LZ/UT/4-8 100 200

UL/LZ/UT/4-10 100 250

UL/LZ/UT/4-12 100 300

UL/LZ/UT/4-16 100 400

UL/LZ/UT/4-18 100 450

UL/LZ/UT/4-20 100 500

UL/LZ/UT/4-24 100 600

UL/LZ/UT/4-30 100 750

UL/LZ/UT/4-36 100 900

UL/LZ/UT/4-40 100 1000

UL/LZ/UT/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/UT/5-10 125 250

UL/LZ/UT/5-12 125 300

UL/LZ/UT/5-16 125 400

UL/LZ/UT/5-18 125 450

UL/LZ/UT/5-20 125 500

UL/LZ/UT/5-24 125 600

UL/LZ/UT/5-30 125 750

UL/LZ/UT/5-36 125 900

UL/LZ/UT/5-40 125 1000

UL/LZ/UT/6-8 150 200

UL/LZ/UT/6-10 150 250

UL/LZ/UT/6-12 150 300

UL/LZ/UT/6-16 150 400

UL/LZ/UT/6-18 150 450

UL/LZ/UT/6-20 150 500

UL/LZ/UT/6-24 150 600

UL/LZ/UT/6-30 150 750

UL/LZ/UT/6-32 150 800

UL/LZ/UT/6-36 150 900

UL/LZ/UT/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 59: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

58

Steel Cable Ladder - Unequal CrossesType: UL/LZ/UC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/UC/2-6 50 150

UL/LZ/UC/2-8 50 200

UL/LZ/UC/2-10 50 250

UL/LZ/UC/2-12 50 300

UL/LZ/UC/3-6 75 150

UL/LZ/UC/3-8 75 200

UL/LZ/UC/3-10 75 250

UL/LZ/UC/3-12 75 300

UL/LZ/UC/4-6 100 150

UL/LZ/UC/4-8 100 200

UL/LZ/UC/4-10 100 250

UL/LZ/UC/4-12 100 300

UL/LZ/UC/4-16 100 400

UL/LZ/UC/4-18 100 450

UL/LZ/UC/4-20 100 500

UL/LZ/UC/4-24 100 600

UL/LZ/UC/4-30 100 750

UL/LZ/UC/4-36 100 900

UL/LZ/UC/4-40 100 1000

UL/LZ/UC/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/UC/5-10 125 250

UL/LZ/UC/5-12 125 300

UL/LZ/UC/5-16 125 400

UL/LZ/UC/5-18 125 450

UL/LZ/UC/5-20 125 500

UL/LZ/UC/5-24 125 600

UL/LZ/UC/5-30 125 750

UL/LZ/UC/5-36 125 900

UL/LZ/UC/5-40 125 1000

UL/LZ/UC/6-8 150 200

UL/LZ/UC/6-10 150 250

UL/LZ/UC/6-12 150 300

UL/LZ/UC/6-16 150 400

UL/LZ/UC/6-18 150 450

UL/LZ/UC/6-20 150 500

UL/LZ/UC/6-24 150 600

UL/LZ/UC/6-30 150 750

UL/LZ/UC/6-32 150 800

UL/LZ/UC/6-36 150 900

UL/LZ/UC/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2)

Rung Spacing 300mm

Steel Cable Ladder

150

H

150W1

90º

R

B

W2

Page 60: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

59

Steel Cable Ladder - Equal CrossesType: UL/LZ/EC

Rung Spacing 300mm

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/EC/2-6 50 150 150

UL/LZ/EC/2-8 50 200 200

UL/LZ/EC/2-10 50 250 250

UL/LZ/EC/2-12 50 300 300

UL/LZ/EC/3-6 75 150 150

UL/LZ/EC/3-8 75 200 200

UL/LZ/EC/3-10 75 250 250

UL/LZ/EC/3-12 75 300 300

UL/LZ/EC/4-6 100 150 150

UL/LZ/EC/4-8 100 200 200

UL/LZ/EC/4-10 100 250 250

UL/LZ/EC/4-12 100 300 300

UL/LZ/EC/4-16 100 400 400

UL/LZ/EC/4-18 100 450 450

UL/LZ/EC/4-20 100 500 500

UL/LZ/EC/4-24 100 600 600

UL/LZ/EC/4-30 100 750 750

UL/LZ/EC/4-36 100 900 900

UL/LZ/EC/4-40 100 1000 1000

UL/LZ/EC/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LZ/EC/5-10 125 250 250

UL/LZ/EC/5-12 125 300 300

UL/LZ/EC/5-16 125 400 400

UL/LZ/EC/5-18 125 450 450

UL/LZ/EC/5-20 125 500 500

UL/LZ/EC/5-24 125 600 600

UL/LZ/EC/5-30 125 750 750

UL/LZ/EC/5-36 125 900 900

UL/LZ/EC/5-40 125 1000 1000

UL/LZ/EC/6-8 150 200 200

UL/LZ/EC/6-10 150 250 250

UL/LZ/EC/6-12 150 300 300

UL/LZ/EC/6-16 150 400 400

UL/LZ/EC/6-18 150 450 450

UL/LZ/EC/6-20 150 500 500

UL/LZ/EC/6-24 150 600 600

UL/LZ/EC/6-30 150 750 750

UL/LZ/EC/6-32 150 800 800

UL/LZ/EC/6-36 150 900 900

UL/LZ/EC/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Steel Cable Ladder

150

H

150W1

90º

W2

R

B

Page 61: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

60

W

H

150

R1

50

90º

B

Steel Cable Ladder - External RiserType: UL/LZ/ER

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/ER/2-6 50 150

UL/LZ/ER/2-8 50 200

UL/LZ/ER/2-10 50 250

UL/LZ/ER/2-12 50 300

UL/LZ/ER/3-6 75 150

UL/LZ/ER/3-8 75 200

UL/LZ/ER/3-10 75 250

UL/LZ/ER/3-12 75 300

UL/LZ/ER/4-6 100 150

UL/LZ/ER/4-8 100 200

UL/LZ/ER/4-10 100 250

UL/LZ/ER/4-12 100 300

UL/LZ/ER/4-16 100 400

UL/LZ/ER/4-18 100 450

UL/LZ/ER/4-20 100 500

UL/LZ/ER/4-24 100 600

UL/LZ/ER/4-30 100 750

UL/LZ/ER/4-36 100 900

UL/LZ/ER/4-40 100 1000

UL/LZ/ER/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/ER/5-10 125 250

UL/LZ/ER/5-12 125 300

UL/LZ/ER/5-16 125 400

UL/LZ/ER/5-18 125 450

UL/LZ/ER/5-20 125 500

UL/LZ/ER/5-24 125 600

UL/LZ/ER/5-30 125 750

UL/LZ/ER/5-36 125 900

UL/LZ/ER/5-40 125 1000

UL/LZ/ER/6-8 150 200

UL/LZ/ER/6-10 150 250

UL/LZ/ER/6-12 150 300

UL/LZ/ER/6-16 150 400

UL/LZ/ER/6-18 150 450

UL/LZ/ER/6-20 150 500

UL/LZ/ER/6-24 150 600

UL/LZ/ER/6-30 150 750

UL/LZ/ER/6-32 150 800

UL/LZ/ER/6-36 150 900

UL/LZ/ER/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 62: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

61

90º

W

H

150

R

15

0

B

Steel Cable Ladder - Internal RiserType: UL/LZ/IR

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/IR/2-6 50 150

UL/LZ/IR/2-8 50 200

UL/LZ/IR/2-10 50 250

UL/LZ/IR/2-12 50 300

UL/LZ/IR/3-6 75 150

UL/LZ/IR/3-8 75 200

UL/LZ/IR/3-10 75 250

UL/LZ/IR/3-12 75 300

UL/LZ/IR/4-6 100 150

UL/LZ/IR/4-8 100 200

UL/LZ/IR/4-10 100 250

UL/LZ/IR/4-12 100 300

UL/LZ/IR/4-16 100 400

UL/LZ/IR/4-18 100 450

UL/LZ/IR/4-20 100 500

UL/LZ/IR/4-24 100 600

UL/LZ/IR/4-30 100 750

UL/LZ/IR/4-36 100 900

UL/LZ/IR/4-40 100 1000

UL/LZ/IR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/IR/5-10 125 250

UL/LZ/IR/5-12 125 300

UL/LZ/IR/5-16 125 400

UL/LZ/IR/5-18 125 450

UL/LZ/IR/5-20 125 500

UL/LZ/IR/5-24 125 600

UL/LZ/IR/5-30 125 750

UL/LZ/IR/5-36 125 900

UL/LZ/IR/5-40 125 1000

UL/LZ/IR/6-8 150 200

UL/LZ/IR/6-10 150 250

UL/LZ/IR/6-12 150 300

UL/LZ/IR/6-16 150 400

UL/LZ/IR/6-18 150 450

UL/LZ/IR/6-20 150 500

UL/LZ/IR/6-24 150 600

UL/LZ/IR/6-30 150 750

UL/LZ/IR/6-32 150 800

UL/LZ/IR/6-36 150 900

UL/LZ/IR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 63: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

62

Steel Cable Ladder - 900 Vertical TeeType: UL/LZ/VT90

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/VT90/2-6 50 150

UL/LZ/VT90/2-8 50 200

UL/LZ/VT90/2-10 50 250

UL/LZ/VT90/2-12 50 300

UL/LZ/VT90/3-6 75 150

UL/LZ/VT90/3-8 75 200

UL/LZ/VT90/3-10 75 250

UL/LZ/VT90/3-12 75 300

UL/LZ/VT90/4-6 100 150

UL/LZ/VT90/4-8 100 200

UL/LZ/VT90/4-10 100 250

UL/LZ/VT90/4-12 100 300

UL/LZ/VT90/4-16 100 400

UL/LZ/VT90/4-18 100 450

UL/LZ/VT90/4-20 100 500

UL/LZ/VT90/4-24 100 600

UL/LZ/VT90/4-30 100 750

UL/LZ/VT90/4-36 100 900

UL/LZ/VT90/4-40 100 1000

UL/LZ/VT90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LZ/VT90/5-10 125 250

UL/LZ/VT90/5-12 125 300

UL/LZ/VT90/5-16 125 400

UL/LZ/VT90/5-18 125 450

UL/LZ/VT90/5-20 125 500

UL/LZ/VT90/5-24 125 600

UL/LZ/VT90/5-30 125 750

UL/LZ/VT90/5-36 125 900

UL/LZ/VT90/5-40 125 1000

UL/LZ/VT90/6-8 150 200

UL/LZ/VT90/6-10 150 250

UL/LZ/VT90/6-12 150 300

UL/LZ/VT90/6-16 150 400

UL/LZ/VT90/6-18 150 450

UL/LZ/VT90/6-20 150 500

UL/LZ/VT90/6-24 150 600

UL/LZ/VT90/6-30 150 750

UL/LZ/VT90/6-32 150 800

UL/LZ/VT90/6-36 150 900

UL/LZ/VT90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W- Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

B

W

R

150

H

90º

15

0

Page 64: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

63

Steel Cable Ladder - Left Offset ReducerType: UL/LZ/LR

Components Ref. H W1 W2 Thickness Finish

UL/LZ/LR/2-6 50 150

UL/LZ/LR/2-8 50 200

UL/LZ/LR/2-10 50 250

UL/LZ/LR/2-12 50 300

UL/LZ/LR/3-6 75 150

UL/LZ/LR/3-8 75 200

UL/LZ/LR/3-10 75 250

UL/LZ/LR/3-12 75 300

UL/LZ/LR/4-6 100 150

UL/LZ/LR/4-8 100 200

UL/LZ/LR/4-10 100 250

UL/LZ/LR/4-12 100 300

UL/LZ/LR/4-16 100 400

UL/LZ/LR/4-18 100 450

UL/LZ/LR/4-20 100 500

UL/LZ/LR/4-24 100 600

UL/LZ/LR/4-30 100 750

UL/LZ/LR/4-36 100 900

UL/LZ/LR/4-40 100 1000

UL/LZ/LR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LZ/LR/5-10 125 250

UL/LZ/LR/5-12 125 300

UL/LZ/LR/5-16 125 400

UL/LZ/LR/5-18 125 450

UL/LZ/LR/5-20 125 500

UL/LZ/LR/5-24 125 600

UL/LZ/LR/5-30 125 750

UL/LZ/LR/5-36 125 900

UL/LZ/LR/5-40 125 1000

UL/LZ/LR/6-8 150 200

UL/LZ/LR/6-10 150 250

UL/LZ/LR/6-12 150 300

UL/LZ/LR/6-16 150 400

UL/LZ/LR/6-18 150 450

UL/LZ/LR/6-20 150 500

UL/LZ/LR/6-24 150 600

UL/LZ/LR/6-30 150 750

UL/LZ/LR/6-32 150 800

UL/LZ/LR/6-36 150 900

UL/LZ/LR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

W2

150

150

W1

H

B

Page 65: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

64

Steel Cable Ladder - Right Offset ReducerType: UL/LZ/RR

Components Ref. H W1 W2 Thickness Finish

UL/LZ/RR/2-6 50 150

UL/LZ/RR/2-8 50 200

UL/LZ/RR/2-10 50 250

UL/LZ/RR/2-12 50 300

UL/LZ/RR/3-6 75 150

UL/LZ/RR/3-8 75 200

UL/LZ/RR/3-10 75 250

UL/LZ/RR/3-12 75 300

UL/LZ/RR/4-6 100 150

UL/LZ/RR/4-8 100 200

UL/LZ/RR/4-10 100 250

UL/LZ/RR/4-12 100 300

UL/LZ/RR/4-16 100 400

UL/LZ/RR/4-18 100 450

UL/LZ/RR/4-20 100 500

UL/LZ/RR/4-24 100 600

UL/LZ/RR/4-30 100 750

UL/LZ/RR/4-36 100 900

UL/LZ/RR/4-40 100 1000

UL/LZ/RR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LZ/RR/5-10 125 250

UL/LZ/RR/5-12 125 300

UL/LZ/RR/5-16 125 400

UL/LZ/RR/5-18 125 450

UL/LZ/RR/5-20 125 500

UL/LZ/RR/5-24 125 600

UL/LZ/RR/5-30 125 750

UL/LZ/RR/5-36 125 900

UL/LZ/RR/5-40 125 1000

UL/LZ/RR/6-8 150 200

UL/LZ/RR/6-10 150 250

UL/LZ/RR/6-12 150 300

UL/LZ/RR/6-16 150 400

UL/LZ/RR/6-18 150 450

UL/LZ/RR/6-20 150 500

UL/LZ/RR/6-24 150 600

UL/LZ/RR/6-30 150 750

UL/LZ/RR/6-32 150 800

UL/LZ/RR/6-36 150 900

UL/LZ/RR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

W2 150

H

150

W1

B

Page 66: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

65

H

W2

B

W1

150

150

Steel Cable Ladder - Straight Offset ReducerType: UL/LZ/SR

Components Ref. H W1 W2 Thickness Finish

UL/LZ/SR/2-6 50 150

UL/LZ/SR/2-8 50 200

UL/LZ/SR/2-10 50 250

UL/LZ/SR/2-12 50 300

UL/LZ/SR/3-6 75 150

UL/LZ/SR/3-8 75 200

UL/LZ/SR/3-10 75 250

UL/LZ/SR/3-12 75 300

UL/LZ/SR/4-6 100 150

UL/LZ/SR/4-8 100 200

UL/LZ/SR/4-10 100 250

UL/LZ/SR/4-12 100 300

UL/LZ/SR/4-16 100 400

UL/LZ/SR/4-18 100 450

UL/LZ/SR/4-20 100 500

UL/LZ/SR/4-24 100 600

UL/LZ/SR/4-30 100 750

UL/LZ/SR/4-36 100 900

UL/LZ/SR/4-40 100 1000

UL/LZ/SR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LZ/SR/5-10 125 250

UL/LZ/SR/5-12 125 300

UL/LZ/SR/5-16 125 400

UL/LZ/SR/5-18 125 450

UL/LZ/SR/5-20 125 500

UL/LZ/SR/5-24 125 600

UL/LZ/SR/5-30 125 750

UL/LZ/SR/5-36 125 900

UL/LZ/SR/5-40 125 1000

UL/LZ/SR/6-8 150 200

UL/LZ/SR/6-10 150 250

UL/LZ/SR/6-12 150 300

UL/LZ/SR/6-16 150 400

UL/LZ/SR/6-18 150 450

UL/LZ/SR/6-20 150 500

UL/LZ/SR/6-24 150 600

UL/LZ/SR/6-30 150 750

UL/LZ/SR/6-32 150 800

UL/LZ/SR/6-36 150 900

UL/LZ/SR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 67: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

66

H

and Flat Washer

M6 x 16 With Hex Nut

Pan Head Slotted Screw

Fixture

30

ø8 X 18

H1

L

Divider

Cable Ladder

Straight Divider Section Application

H1

10

7

Steel Cable Ladder - Straight DividerType: UL/LZ/SD

Components Ref. H L1 Thickness L Finish

UL/LZ/SD-2 50 20 1.5

UL/LZ/SD-3 75 45 1.5

UL/LZ/SD-4 100 70 2.0

UL/LZ/SD-5 125 95 2.0

UL/LZ/SD-6 150 120 2.0

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

1500 or 3000

Dimension in Millimetre Abbreviation: H - Height L - Length

When ordering Material and Finish as straight cable ladder please also indicate Length (L).

Steel Cable Ladder

Page 68: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

67

Ladder

M8 x 20 Hex screw

35

COVER

CABLE LADDER AND COVER SECTION APPLICATION

Cover Clamp

width of 800mm or moreStiffener for cover with

33

Cover

25

28

Recess for overlapping

L

H

4

HW

W1

COVER CLAMP DETAIL

Steel Cable Ladder - Straight CoverType: UL/LZ/SC

Components Ref. H W W1 Thickness L Finish

UL/LZ/SC-1 16 150 195 1.5

UL/LZ/SC-2 16 200 245 1.5

UL/LZ/SC-3 16 250 295 1.5

UL/LZ/SC-4 16 300 345 1.5

UL/LZ/SC-5 16 150 195 1.5

UL/LZ/SC-6 16 200 245 1.5

UL/LZ/SC-7 16 250 295 1.5

UL/LZ/SC-8 16 300 345 1.5

UL/LZ/SC-9 16 150 195 2.0

UL/LZ/SC-10 16 200 245 2.0

UL/LZ/SC-11 16 250 295 2.0

UL/LZ/SC-12 16 300 345 2.0

UL/LZ/SC-13 16 400 445 2.0

UL/LZ/SC-14 16 450 495 2.0

UL/LZ/SC-15 16 500 545 2.0

UL/LZ/SC-16 16 600 645 2.0

UL/LZ/SC-17 16 750 795 2.0

UL/LZ/SC-18 16 900 945 2.0

UL/LZ/SC-19 16 1000 1045 2.0

UL/LZ/SC-20 16 200 245 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Components Ref. H W W1 Thickness L Finish

UL/LZ/SC-21 16 250 295 2.0

UL/LZ/SC-22 16 300 345 2.0

UL/LZ/SC-23 16 400 445 2.0

UL/LZ/SC-24 16 450 495 2.0

UL/LZ/SC-25 16 500 545 2.0

UL/LZ/SC-26 16 600 645 2.0

UL/LZ/SC-27 16 750 795 2.0

UL/LZ/SC-28 16 900 945 2.0

UL/LZ/SC-29 16 1000 1045 2.0

UL/LZ/SC-30 16 200 245 2.0

UL/LZ/SC-31 16 250 295 2.0

UL/LZ/SC-32 16 300 345 2.0

UL/LZ/SC-33 16 400 445 2.0

UL/LZ/SC-34 16 450 495 2.0

UL/LZ/SC-35 16 500 545 2.0

UL/LZ/SC-36 16 600 645 2.0

UL/LZ/SC-37 16 750 795 2.0

UL/LZ/SC-38 16 800 845 2.0

UL/LZ/SC-39 16 900 945 2.0

UL/LZ/SC-40 16 1000 1045 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Dimension in Millimetre Abbreviation: H - Height L - Length W - Width

When ordering Material and Finish as straight cable ladder please also indicateLength (L).

Components Ref. Description

UL/LZ/CMP Cable Ladder Cover Clamp

Steel Cable Ladder

Page 69: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

68

12

22

H

Total 6 Sets Per Connection

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

and Flat Washer

180

44

45

45

23

23

9mm Sq

Steel Cable Ladder - Horizontal Splice PlateType: UL/LZ/HS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/HS-6-4 100

UL/LZ/HS-6-5 125

UL/LZ/HS-6-6 150

Splice Plate and Fixture

Application

Horizontal Splite Plate With Fixture For

100mm - 125mm - 150mm Height Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Steel Cable Ladder

Page 70: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

69

Steel Cable Ladder - Horizontal Splice PlateType: UL/LZ/HS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/HS-4-2 50

UL/LZ/HS-4-3 75Horizontal Splice Plate With Fixture

For 50mm and 75mm Height Cable Ladder

Steel Cable Ladder

9mm Sq

Total 4 Sets Per Connection

and Flat Washer

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

12

22

H

18045

44

45

23

23

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 71: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

70

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LZ/VAS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/VAS-6-4 100

UL/LZ/VAS-6-5 125

UL/LZ/VAS-6-6 150

Vertical Adjustable Splice Plate With Fixture For

100mm - 125mm - 150mm Height Cable Ladder

Steel Cable Ladder

180

Cup Head Sq Neck Screw

9mm Sq

M8 x 20 With Hex Nutand Flat Washer

Hex Screw

and Flat WasherM8 x 20 With Hex Nut

23

12

2245

90

100

ø12

Total 6 Sets Per ConnectionTotal 1 Set Per Connection

H

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 72: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

71

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LZ/VAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/VAS-4-2 50

UL/LZ/VAS-4-3 75Vertical Adjustable Splice Plate With Fixture

For 50mm and 75mm Height Cable Ladder

Steel Cable Ladder

12

Hex Screw

M10 x 20 With Hex Nut

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

2344

90

180

H

23

and Flat Washer

and Flat Washer

ø12

Total 4 Sets Per Connection

Total 1 Set Per Connection100

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 73: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

72

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LZ/HAS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/HAS-6-4 100

UL/LZ/HAS-6-5 125

UL/LZ/HAS-6-6 150

Horizontal Adjustable Splice Plate With Fixture

For 100mm-125mm-150mm Height Cable Ladder

Steel Cable Ladder

12

and Flat Washer

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

H

23

90º

250

Total 6 Sets Per Connection

45

92

45

34

34

ø13 x 35

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 74: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

73

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LZ/HAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LZ/HAS-4-2 50

UL/LZ/HAS-4-3 75Horizontal Adjustable Splice Plate With Fixture

For 50mm and 75mm Height Cable Ladder

Steel Cable Ladder

250

23

H

12

90º

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

and Flat Washer

Total 4 Sets Per Connection

92

45

45

34

34

ø13 x 35

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 75: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

74

Steel Cable Ladder - End PlateType: UL/LZ/EP-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H W Description Finish

UL/LZ/EP-6-4 100 97

UL/LZ/EP-6-5 125 122

UL/LZ/EP-6-6 150 147

End Plate with FixtureWidth of Cable Ladder

Plus 2mm Clearance

Steel Cable Ladder

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

89

W

H

and Flat Washer

Total 4 Sets Per End Plate

End Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 76: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

75

Steel Cable Ladder - End PlateType: UL/LZ/EP-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H W Description Finish

UL/LZ/EP-4-2 50 47

UL/LZ/EP-4-3 75 72 End Plate with FixtureWidth of Cable Ladder

Plus 2mm Clearance

Steel Cable Ladder

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

H

W

and Flat Washer

Total 4 Sets Per End Plate

89

End Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 77: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

76

Steel Cable Ladder - Hold Down ClampType: UL/L-CP

Dimension in Millimetre

When ordering please indicate Material and Finish.

Components Ref. Description Thickness Finish

UL/L-CP Hold Down Clamp 4mm

Steel Cable Ladder

HOLD DOWN CLAMP WITH FIXTURE

CABLE LADDER

ULISTRUT

SUPPORT

42

45

M8 Spring Nut

With M8 x 20 Hex Screw

Hold Down Clamp

and Flat Washer

Clamp and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 78: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

77

CONNECTION SLOT DETAIL

RUNG DETAIL

CONNECTION SLOT DETAIL

H

25

25

SIDE RAIL SECTIONCable Ladder

For 100mm - 125mm - 150mm heigth

w

Cable LadderFor 50mm and 75mm height

ø9 X 1845

22

ø9 X 1845

22

W

ø8 X 20

40

24

L

B1

B2

HSteel Cable Ladder - StraightType: UL/LN/ST

Components Ref. H W B1 B2 L Thickness Finish

UL/LN/ST/2-6 50 150 150 300 3000 1.5

UL/LN/ST/2-8 50 200 150 300 3000 1.5

UL/LN/ST/2-10 50 250 150 300 3000 1.5

UL/LN/ST/2-12 50 300 150 300 3000 1.5

UL/LN/ST/3-6 75 150 150 300 3000 1.5

UL/LN/ST/3-8 75 200 150 300 3000 1.5

UL/LN/ST/3-10 75 250 150 300 3000 1.5

UL/LN/ST/3-12 75 300 150 300 3000 1.5

UL/LN/ST/4-6 100 150 150 300 3000 2.0

UL/LN/ST/4-8 100 200 150 300 3000 2.0

UL/LN/ST/4-10 100 250 150 300 3000 2.0

UL/LN/ST/4-12 100 300 150 300 3000 2.0

UL/LN/ST/4-16 100 400 150 300 3000 2.0

UL/LN/ST/4-18 100 450 150 300 3000 2.0

UL/LN/ST/4-20 100 500 150 300 3000 2.0

UL/LN/ST/4-24 100 600 150 300 3000 2.0

UL/LN/ST/4-30 100 750 150 300 3000 2.0

UL/LN/ST/4-36 100 900 150 300 3000 2.0

UL/LN/ST/4-40 100 1000 150 300 3000 2.0

UL/LN/ST/5-8 125 200 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. H W B1 B2 L Thickness Finish

UL/LN/ST/5-10 125 250 150 300 3000 2.0

UL/LN/ST/5-12 125 300 150 300 3000 2.0

UL/LN/ST/5-16 125 400 150 300 3000 2.0

UL/LN/ST/5-18 125 450 150 300 3000 2.0

UL/LN/ST/5-20 125 500 150 300 3000 2.0

UL/LN/ST/5-24 125 600 150 300 3000 2.0

UL/LN/ST/5-30 125 750 150 300 3000 2.0

UL/LN/ST/5-36 125 900 150 300 3000 2.0

UL/LN/ST/5-40 125 1000 150 300 3000 2.0

UL/LN/ST/6-8 150 200 150 300 3000 2.0

UL/LN/ST/6-10 150 250 150 300 3000 2.0

UL/LN/ST/6-12 150 300 150 300 3000 2.0

UL/LN/ST/6-16 150 400 150 300 3000 2.0

UL/LN/ST/6-18 150 450 150 300 3000 2.0

UL/LN/ST/6-20 150 500 150 300 3000 2.0

UL/LN/ST/6-24 150 600 150 300 3000 2.0

UL/LN/ST/6-30 150 750 150 300 3000 2.0

UL/LN/ST/6-32 150 800 150 300 3000 2.0

UL/LN/ST/6-36 150 900 150 300 3000 2.0

UL/LN/ST/6-40 150 1000 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Dimension in MillimetreAbbreviation: W - Width H - Height B - Rung Spacing L - Length

When ordering please indicate Material and Finish.We also supply other sizes with the same Side Rail, Rung Profile and various number of Connection Slots.

Steel Cable Ladder

Page 79: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

78

Steel Cable Ladder - 900 ElbowType: UL/LN/EL90

Components Ref. H W Thickness R (Radii) Finish

UL/LN/EL90/2-6 50 150

UL/LN/EL90/2-8 50 200

UL/LN/EL90/2-10 50 250

UL/LN/EL90/2-12 50 300

UL/LN/EL90/3-6 75 150

UL/LN/EL90/3-8 75 200

UL/LN/EL90/3-10 75 250

UL/LN/EL90/3-12 75 300

UL/LN/EL90/4-6 100 150

UL/LN/EL90/4-8 100 200

UL/LN/EL90/4-10 100 250

UL/LN/EL90/4-12 100 300

UL/LN/EL90/4-16 100 400

UL/LN/EL90/4-18 100 450

UL/LN/EL90/4-20 100 500

UL/LN/EL90/4-24 100 600

UL/LN/EL90/4-30 100 750

UL/LN/EL90/4-36 100 900

UL/LN/EL90/4-40 100 1000

UL/LN/EL90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LN/EL90/5-10 125 250

UL/LN/EL90/5-12 125 300

UL/LN/EL90/5-16 125 400

UL/LN/EL90/5-18 125 450

UL/LN/EL90/5-20 125 500

UL/LN/EL90/5-24 125 600

UL/LN/EL90/5-30 125 750

UL/LN/EL90/5-36 125 900

UL/LN/EL90/5-40 125 1000

UL/LN/EL90/6-8 150 200

UL/LN/EL90/6-10 150 250

UL/LN/EL90/6-12 150 300

UL/LN/EL90/6-16 150 400

UL/LN/EL90/6-18 150 450

UL/LN/EL90/6-20 150 500

UL/LN/EL90/6-24 150 600

UL/LN/EL90/6-30 150 750

UL/LN/EL90/6-32 150 800

UL/LN/EL90/6-36 150 900

UL/LN/EL90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

150 150

R

W

H

90º

B

Mid-section

Page 80: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

79

R

45º

150150

W

H

B

Mid-Section

Steel Cable Ladder - 450 ElbowType: UL/LN/EL45

Components Ref. H W Thickness R (Radii) Finish

UL/LN/EL45/2-6 50 150

UL/LN/EL45/2-8 50 200

UL/LN/EL45/2-10 50 250

UL/LN/EL45/2-12 50 300

UL/LN/EL45/3-6 75 150

UL/LN/EL45/3-8 75 200

UL/LN/EL45/3-10 75 250

UL/LN/EL45/3-12 75 300

UL/LN/EL45/4-6 100 150

UL/LN/EL45/4-8 100 200

UL/LN/EL45/4-10 100 250

UL/LN/EL45/4-12 100 300

UL/LN/EL45/4-16 100 400

UL/LN/EL45/4-18 100 450

UL/LN/EL45/4-20 100 500

UL/LN/EL45/4-24 100 600

UL/LN/EL45/4-30 100 750

UL/LN/EL45/4-36 100 900

UL/LN/EL45/4-40 100 1000

UL/LN/EL45/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LN/EL45/5-10 125 250

UL/LN/EL45/5-12 125 300

UL/LN/EL45/5-16 125 400

UL/LN/EL45/5-18 125 450

UL/LN/EL45/5-20 125 500

UL/LN/EL45/5-24 125 600

UL/LN/EL45/5-30 125 750

UL/LN/EL45/5-36 125 900

UL/LN/EL45/5-40 125 1000

UL/LN/EL45/6-8 150 200

UL/LN/EL45/6-10 150 250

UL/LN/EL45/6-12 150 300

UL/LN/EL45/6-16 150 400

UL/LN/EL45/6-18 150 450

UL/LN/EL45/6-20 150 500

UL/LN/EL45/6-24 150 600

UL/LN/EL45/6-30 150 750

UL/LN/EL45/6-32 150 800

UL/LN/EL45/6-36 150 900

UL/LN/EL45/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 81: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

80

W1 W2

R

90º

150 150

H

B

Steel Cable Ladder - Horizontal Equal TeeType: UL/LN/ET

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/ET/2-6 50 150 150

UL/LN/ET/2-8 50 200 200

UL/LN/ET/2-10 50 250 250

UL/LN/ET/2-12 50 300 300

UL/LN/ET/3-6 75 150 150

UL/LN/ET/3-8 75 200 200

UL/LN/ET/3-10 75 250 250

UL/LN/ET/3-12 75 300 300

UL/LN/ET/4-6 100 150 150

UL/LN/ET/4-8 100 200 200

UL/LN/ET/4-10 100 250 250

UL/LN/ET/4-12 100 300 300

UL/LN/ET/4-16 100 400 400

UL/LN/ET/4-18 100 450 450

UL/LN/ET/4-20 100 500 500

UL/LN/ET/4-24 100 600 600

UL/LN/ET/4-30 100 750 750

UL/LN/ET/4-36 100 900 900

UL/LN/ET/4-40 100 1000 1000

UL/LN/ET/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/ET/5-10 125 250 250

UL/LN/ET/5-12 125 300 300

UL/LN/ET/5-16 125 400 400

UL/LN/ET/5-18 125 450 450

UL/LN/ET/5-20 125 500 500

UL/LN/ET/5-24 125 600 600

UL/LN/ET/5-30 125 750 750

UL/LN/ET/5-36 125 900 900

UL/LN/ET/5-40 125 1000 1000

UL/LN/ET/6-8 150 200 200

UL/LN/ET/6-10 150 250 250

UL/LN/ET/6-12 150 300 300

UL/LN/ET/6-16 150 400 400

UL/LN/ET/6-18 150 450 450

UL/LN/ET/6-20 150 500 500

UL/LN/ET/6-24 150 600 600

UL/LN/ET/6-30 150 750 750

UL/LN/ET/6-32 150 800 800

UL/LN/ET/6-36 150 900 900

UL/LN/ET/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 82: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

81

W1

15090º150

R

W2

H

B

Steel Cable Ladder - Unequal TeeType: UL/LN/UT

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/UT/2-6 50 150

UL/LN/UT/2-8 50 200

UL/LN/UT/2-10 50 250

UL/LN/UT/2-12 50 300

UL/LN/UT/3-6 75 150

UL/LN/UT/3-8 75 200

UL/LN/UT/3-10 75 250

UL/LN/UT/3-12 75 300

UL/LN/UT/4-6 100 150

UL/LN/UT/4-8 100 200

UL/LN/UT/4-10 100 250

UL/LN/UT/4-12 100 300

UL/LN/UT/4-16 100 400

UL/LN/UT/4-18 100 450

UL/LN/UT/4-20 100 500

UL/LN/UT/4-24 100 600

UL/LN/UT/4-30 100 750

UL/LN/UT/4-36 100 900

UL/LN/UT/4-40 100 1000

UL/LN/UT/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/UT/5-10 125 250

UL/LN/UT/5-12 125 300

UL/LN/UT/5-16 125 400

UL/LN/UT/5-18 125 450

UL/LN/UT/5-20 125 500

UL/LN/UT/5-24 125 600

UL/LN/UT/5-30 125 750

UL/LN/UT/5-36 125 900

UL/LN/UT/5-40 125 1000

UL/LN/UT/6-8 150 200

UL/LN/UT/6-10 150 250

UL/LN/UT/6-12 150 300

UL/LN/UT/6-16 150 400

UL/LN/UT/6-18 150 450

UL/LN/UT/6-20 150 500

UL/LN/UT/6-24 150 600

UL/LN/UT/6-30 150 750

UL/LN/UT/6-32 150 800

UL/LN/UT/6-36 150 900

UL/LN/UT/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 83: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

82

W2150W1 150

H R

90º

B

Steel Cable Ladder - Equal CrossesType: UL/LN/EC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/EC/2-6 50 150 150

UL/LN/EC/2-8 50 200 200

UL/LN/EC/2-10 50 250 250

UL/LN/EC/2-12 50 300 300

UL/LN/EC/3-6 75 150 150

UL/LN/EC/3-8 75 200 200

UL/LN/EC/3-10 75 250 250

UL/LN/EC/3-12 75 300 300

UL/LN/EC/4-6 100 150 150

UL/LN/EC/4-8 100 200 200

UL/LN/EC/4-10 100 250 250

UL/LN/EC/4-12 100 300 300

UL/LN/EC/4-16 100 400 400

UL/LN/EC/4-18 100 450 450

UL/LN/EC/4-20 100 500 500

UL/LN/EC/4-24 100 600 600

UL/LN/EC/4-30 100 750 750

UL/LN/EC/4-36 100 900 900

UL/LN/EC/4-40 100 1000 1000

UL/LN/EC/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/EC/5-10 125 250 250

UL/LN/EC/5-12 125 300 300

UL/LN/EC/5-16 125 400 400

UL/LN/EC/5-18 125 450 450

UL/LN/EC/5-20 125 500 500

UL/LN/EC/5-24 125 600 600

UL/LN/EC/5-30 125 750 750

UL/LN/EC/5-36 125 900 900

UL/LN/EC/5-40 125 1000 1000

UL/LN/EC/6-8 150 200 200

UL/LN/EC/6-10 150 250 250

UL/LN/EC/6-12 150 300 300

UL/LN/EC/6-16 150 400 400

UL/LN/EC/6-18 150 450 450

UL/LN/EC/6-20 150 500 500

UL/LN/EC/6-24 150 600 600

UL/LN/EC/6-30 150 750 750

UL/LN/EC/6-32 150 800 800

UL/LN/EC/6-36 150 900 900

UL/LN/EC/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 84: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

83

W1

150 W2150

R

H

90º

B

Steel Cable Ladder - Unequal CrossesType: UL/LN/UC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/UC/2-6 50 150

UL/LN/UC/2-8 50 200

UL/LN/UC/2-10 50 250

UL/LN/UC/2-12 50 300

UL/LN/UC/3-6 75 150

UL/LN/UC/3-8 75 200

UL/LN/UC/3-10 75 250

UL/LN/UC/3-12 75 300

UL/LN/UC/4-6 100 150

UL/LN/UC/4-8 100 200

UL/LN/UC/4-10 100 250

UL/LN/UC/4-12 100 300

UL/LN/UC/4-16 100 400

UL/LN/UC/4-18 100 450

UL/LN/UC/4-20 100 500

UL/LN/UC/4-24 100 600

UL/LN/UC/4-30 100 750

UL/LN/UC/4-36 100 900

UL/LN/UC/4-40 100 1000

UL/LN/UC/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LN/UC/5-10 125 250

UL/LN/UC/5-12 125 300

UL/LN/UC/5-16 125 400

UL/LN/UC/5-18 125 450

UL/LN/UC/5-20 125 500

UL/LN/UC/5-24 125 600

UL/LN/UC/5-30 125 750

UL/LN/UC/5-36 125 900

UL/LN/UC/5-40 125 1000

UL/LN/UC/6-8 150 200

UL/LN/UC/6-10 150 250

UL/LN/UC/6-12 150 300

UL/LN/UC/6-16 150 400

UL/LN/UC/6-18 150 450

UL/LN/UC/6-20 150 500

UL/LN/UC/6-24 150 600

UL/LN/UC/6-30 150 750

UL/LN/UC/6-32 150 800

UL/LN/UC/6-36 150 900

UL/LN/UC/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 85: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

84

H

150

R1

50

W

90º

B

Steel Cable Ladder - External RiserType: UL/LN/ER

Components Ref. H W Thickness R (Radii) Finish

UL/LN/ER/2-6 50 150

UL/LN/ER/2-8 50 200

UL/LN/ER/2-10 50 250

UL/LN/ER/2-12 50 300

UL/LN/ER/3-6 75 150

UL/LN/ER/3-8 75 200

UL/LN/ER/3-10 75 250

UL/LN/ER/3-12 75 300

UL/LN/ER/4-6 100 150

UL/LN/ER/4-8 100 200

UL/LN/ER/4-10 100 250

UL/LN/ER/4-12 100 300

UL/LN/ER/4-16 100 400

UL/LN/ER/4-18 100 450

UL/LN/ER/4-20 100 500

UL/LN/ER/4-24 100 600

UL/LN/ER/4-30 100 750

UL/LN/ER/4-36 100 900

UL/LN/ER/4-40 100 1000

UL/LN/ER/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LN/ER/5-10 125 250

UL/LN/ER/5-12 125 300

UL/LN/ER/5-16 125 400

UL/LN/ER/5-18 125 450

UL/LN/ER/5-20 125 500

UL/LN/ER/5-24 125 600

UL/LN/ER/5-30 125 750

UL/LN/ER/5-36 125 900

UL/LN/ER/5-40 125 1000

UL/LN/ER/6-8 150 200

UL/LN/ER/6-10 150 250

UL/LN/ER/6-12 150 300

UL/LN/ER/6-16 150 400

UL/LN/ER/6-18 150 450

UL/LN/ER/6-20 150 500

UL/LN/ER/6-24 150 600

UL/LN/ER/6-30 150 750

UL/LN/ER/6-32 150 800

UL/LN/ER/6-36 150 900

UL/LN/ER/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 86: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

85

R

H

W

90º

15

0150

B

Steel Cable Ladder - Internal RiserType: UL/LN/IR

Components Ref. H W Thickness R (Radii) Finish

UL/LN/IR/2-6 50 150

UL/LN/IR/2-8 50 200

UL/LN/IR/2-10 50 250

UL/LN/IR/2-12 50 300

UL/LN/IR/3-6 75 150

UL/LN/IR/3-8 75 200

UL/LN/IR/3-10 75 250

UL/LN/IR/3-12 75 300

UL/LN/IR/4-6 100 150

UL/LN/IR/4-8 100 200

UL/LN/IR/4-10 100 250

UL/LN/IR/4-12 100 300

UL/LN/IR/4-16 100 400

UL/LN/IR/4-18 100 450

UL/LN/IR/4-20 100 500

UL/LN/IR/4-24 100 600

UL/LN/IR/4-30 100 750

UL/LN/IR/4-36 100 900

UL/LN/IR/4-40 100 1000

UL/LN/IR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LN/IR/5-10 125 250

UL/LN/IR/5-12 125 300

UL/LN/IR/5-16 125 400

UL/LN/IR/5-18 125 450

UL/LN/IR/5-20 125 500

UL/LN/IR/5-24 125 600

UL/LN/IR/5-30 125 750

UL/LN/IR/5-36 125 900

UL/LN/IR/5-40 125 1000

UL/LN/IR/6-8 150 200

UL/LN/IR/6-10 150 250

UL/LN/IR/6-12 150 300

UL/LN/IR/6-16 150 400

UL/LN/IR/6-18 150 450

UL/LN/IR/6-20 150 500

UL/LN/IR/6-24 150 600

UL/LN/IR/6-30 150 750

UL/LN/IR/6-32 150 800

UL/LN/IR/6-36 150 900

UL/LN/IR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 87: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

86

15

0

H

150

R

W

B

90º

Steel Cable Ladder - 900 Vertical TeeType: UL/LN/VT90

Components Ref. H W Thickness R (Radii) Finish

UL/LN/VT90/2-6 50 150

UL/LN/VT90/2-8 50 200

UL/LN/VT90/2-10 50 250

UL/LN/VT90/2-12 50 300

UL/LN/VT90/3-6 75 150

UL/LN/VT90/3-8 75 200

UL/LN/VT90/3-10 75 250

UL/LN/VT90/3-12 75 300

UL/LN/VT90/4-6 100 150

UL/LN/VT90/4-8 100 200

UL/LN/VT90/4-10 100 250

UL/LN/VT90/4-12 100 300

UL/LN/VT90/4-16 100 400

UL/LN/VT90/4-18 100 450

UL/LN/VT90/4-20 100 500

UL/LN/VT90/4-24 100 600

UL/LN/VT90/4-30 100 750

UL/LN/VT90/4-36 100 900

UL/LN/VT90/4-40 100 1000

UL/LN/VT90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LN/VT90/5-10 125 250

UL/LN/VT90/5-12 125 300

UL/LN/VT90/5-16 125 400

UL/LN/VT90/5-18 125 450

UL/LN/VT90/5-20 125 500

UL/LN/VT90/5-24 125 600

UL/LN/VT90/5-30 125 750

UL/LN/VT90/5-36 125 900

UL/LN/VT90/5-40 125 1000

UL/LN/VT90/6-8 150 200

UL/LN/VT90/6-10 150 250

UL/LN/VT90/6-12 150 300

UL/LN/VT90/6-16 150 400

UL/LN/VT90/6-18 150 450

UL/LN/VT90/6-20 150 500

UL/LN/VT90/6-24 150 600

UL/LN/VT90/6-30 150 750

UL/LN/VT90/6-32 150 800

UL/LN/VT90/6-36 150 900

UL/LN/VT90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 88: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

87

H

150

W2

150

W1

B

Steel Cable Ladder - Left Offset ReducerType: UL/LN/LR

Components Ref. H W1 W2 Thickness Finish

UL/LN/LR/2-6 50 150

UL/LN/LR/2-8 50 200

UL/LN/LR/2-10 50 250

UL/LN/LR/2-12 50 300

UL/LN/LR/3-6 75 150

UL/LN/LR/3-8 75 200

UL/LN/LR/3-10 75 250

UL/LN/LR/3-12 75 300

UL/LN/LR/4-6 100 150

UL/LN/LR/4-8 100 200

UL/LN/LR/4-10 100 250

UL/LN/LR/4-12 100 300

UL/LN/LR/4-16 100 400

UL/LN/LR/4-18 100 450

UL/LN/LR/4-20 100 500

UL/LN/LR/4-24 100 600

UL/LN/LR/4-30 100 750

UL/LN/LR/4-36 100 900

UL/LN/LR/4-40 100 1000

UL/LN/LR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LN/LR/5-10 125 250

UL/LN/LR/5-12 125 300

UL/LN/LR/5-16 125 400

UL/LN/LR/5-18 125 450

UL/LN/LR/5-20 125 500

UL/LN/LR/5-24 125 600

UL/LN/LR/5-30 125 750

UL/LN/LR/5-36 125 900

UL/LN/LR/5-40 125 1000

UL/LN/LR/6-8 150 200

UL/LN/LR/6-10 150 250

UL/LN/LR/6-12 150 300

UL/LN/LR/6-16 150 400

UL/LN/LR/6-18 150 450

UL/LN/LR/6-20 150 500

UL/LN/LR/6-24 150 600

UL/LN/LR/6-30 150 750

UL/LN/LR/6-32 150 800

UL/LN/LR/6-36 150 900

UL/LN/LR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 89: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

88

W1

150

150

W2

H

B

Steel Cable Ladder - Right Offset ReducerType: UL/LN/RR

Components Ref. H W1 W2 Thickness Finish

UL/LN/RR/2-6 50 150

UL/LN/RR/2-8 50 200

UL/LN/RR/2-10 50 250

UL/LN/RR/2-12 50 300

UL/LN/RR/3-6 75 150

UL/LN/RR/3-8 75 200

UL/LN/RR/3-10 75 250

UL/LN/RR/3-12 75 300

UL/LN/RR/4-6 100 150

UL/LN/RR/4-8 100 200

UL/LN/RR/4-10 100 250

UL/LN/RR/4-12 100 300

UL/LN/RR/4-16 100 400

UL/LN/RR/4-18 100 450

UL/LN/RR/4-20 100 500

UL/LN/RR/4-24 100 600

UL/LN/RR/4-30 100 750

UL/LN/RR/4-36 100 900

UL/LN/RR/4-40 100 1000

UL/LN/RR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LN/RR/5-10 125 250

UL/LN/RR/5-12 125 300

UL/LN/RR/5-16 125 400

UL/LN/RR/5-18 125 450

UL/LN/RR/5-20 125 500

UL/LN/RR/5-24 125 600

UL/LN/RR/5-30 125 750

UL/LN/RR/5-36 125 900

UL/LN/RR/5-40 125 1000

UL/LN/RR/6-8 150 200

UL/LN/RR/6-10 150 250

UL/LN/RR/6-12 150 300

UL/LN/RR/6-16 150 400

UL/LN/RR/6-18 150 450

UL/LN/RR/6-20 150 500

UL/LN/RR/6-24 150 600

UL/LN/RR/6-30 150 750

UL/LN/RR/6-32 150 800

UL/LN/RR/6-36 150 900

UL/LN/RR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 90: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

89

150

W2

H

150

W1

B

Steel Cable Ladder - Straight Offset ReducerType: UL/LN/SR

Components Ref. H W1 W2 Thickness Finish

UL/LN/SR/2-6 50 150

UL/LN/SR/2-8 50 200

UL/LN/SR/2-10 50 250

UL/LN/SR/2-12 50 300

UL/LN/SR/3-6 75 150

UL/LN/SR/3-8 75 200

UL/LN/SR/3-10 75 250

UL/LN/SR/3-12 75 300

UL/LN/SR/4-6 100 150

UL/LN/SR/4-8 100 200

UL/LN/SR/4-10 100 250

UL/LN/SR/4-12 100 300

UL/LN/SR/4-16 100 400

UL/LN/SR/4-18 100 450

UL/LN/SR/4-20 100 500

UL/LN/SR/4-24 100 600

UL/LN/SR/4-30 100 750

UL/LN/SR/4-36 100 900

UL/LN/SR/4-40 100 1000

UL/LN/SR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LN/SR/5-10 125 250

UL/LN/SR/5-12 125 300

UL/LN/SR/5-16 125 400

UL/LN/SR/5-18 125 450

UL/LN/SR/5-20 125 500

UL/LN/SR/5-24 125 600

UL/LN/SR/5-30 125 750

UL/LN/SR/5-36 125 900

UL/LN/SR/5-40 125 1000

UL/LN/SR/6-8 150 200

UL/LN/SR/6-10 150 250

UL/LN/SR/6-12 150 300

UL/LN/SR/6-16 150 400

UL/LN/SR/6-18 150 450

UL/LN/SR/6-20 150 500

UL/LN/SR/6-24 150 600

UL/LN/SR/6-30 150 750

UL/LN/SR/6-32 150 800

UL/LN/SR/6-36 150 900

UL/LN/SR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 91: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

90

Divider

Cable Ladder

H1

H

10

7

and Flat Washer

M6 x 16 With Hex Nut

Pan Head Slotted Screw

Fixture

STRAIGHT DIVIDER SECTION

30

APPLICATION

L

ø8 X 18

H1

Steel Cable Ladder - Straight DividerType: UL/LN/SD

Dimension in MillimetreAbbreviation: H - Height L - Length

When ordering Material and Finish as straight cable ladder please also indicate Length (L).

Steel Cable Ladder

Components Ref. H H1 Thickness L Finish

UL/LN/SD-2 50 20 1.5

UL/LN/SD-3 75 45 1.5

UL/LN/SD-4 100 70 2.0

UL/LN/SD-5 125 95 2.0

UL/LN/SD-6 150 120 2.0

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

1500 or 3000

Page 92: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

91

H

H

CABLE LADDER AND COVER SECTION

L

APPLICATION

M8 x 20 Hex screw

3528

25

4

COVER CLAMP

33

COVER

W1

W

Cover Clamp

Ladder

Cover

width of 800mm or moreStiffener for cover with

Recess for overlapping

Steel Cable Ladder - Straight CoverType: UL/LN/SC

Components Ref. H W W1 Thickness L Finish

UL/LN/SC-1 16 150 195 1.5

UL/LN/SC-2 16 200 245 1.5

UL/LN/SC-3 16 250 295 1.5

UL/LN/SC-4 16 300 345 1.5

UL/LN/SC-5 16 150 195 1.5

UL/LN/SC-6 16 200 245 1.5

UL/LN/SC-7 16 250 295 1.5

UL/LN/SC-8 16 300 345 1.5

UL/LN/SC-9 16 150 195 2.0

UL/LN/SC-10 16 200 245 2.0

UL/LN/SC-11 16 250 295 2.0

UL/LN/SC-12 16 300 345 2.0

UL/LN/SC-13 16 400 445 2.0

UL/LN/SC-14 16 450 495 2.0

UL/LN/SC-15 16 500 545 2.0

UL/LN/SC-16 16 600 645 2.0

UL/LN/SC-17 16 750 795 2.0

UL/LN/SC-18 16 900 945 2.0

UL/LN/SC-19 16 1000 1045 2.0

UL/LN/SC-20 16 200 245 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Components Ref. H W W1 Thickness L Finish

UL/LN/SC-21 16 250 295 2.0

UL/LN/SC-22 16 300 345 2.0

UL/LN/SC-23 16 400 445 2.0

UL/LN/SC-24 16 450 495 2.0

UL/LN/SC-25 16 500 545 2.0

UL/LN/SC-26 16 600 645 2.0

UL/LN/SC-27 16 750 795 2.0

UL/LN/SC-28 16 900 945 2.0

UL/LN/SC-29 16 1000 1045 2.0

UL/LN/SC-30 16 200 245 2.0

UL/LN/SC-31 16 250 295 2.0

UL/LN/SC-32 16 300 345 2.0

UL/LN/SC-33 16 400 445 2.0

UL/LN/SC-34 16 450 495 2.0

UL/LN/SC-35 16 500 545 2.0

UL/LN/SC-36 16 600 645 2.0

UL/LN/SC-37 16 750 795 2.0

UL/LN/SC-38 16 800 845 2.0

UL/LN/SC-39 16 900 945 2.0

UL/LN/SC-40 16 1000 1045 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Dimension in MillimetreAbbreviation: H - Height L - Length W - Width

When ordering Material and Finish as straight cable ladder please also indicateLength.

Components Ref. Description

UL/LZ/CMP Cable Ladder Cover Clamp

Steel Cable Ladder

Page 93: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

92

and Flat Washer

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

14

23

45180

44

45

23

H

9mm Sq

Total 6 Sets Per Connection

Steel Cable Ladder - Horizontal Splice PlateType: UL/LC/HS-6

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. H Description Finish

UL/LC/HS-6-4 100

UL/LC/HS-6-5 125

UL/LC/HS-6-6 150

Splice Plate and Fixture

Application

Horizontal Splice Plate With FixtureFor 100mm - 125mm - 150mm

Height Cable Ladder

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 94: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

Components Ref. Cable Ladder Height H Finish

UL/LN/HS-4-2 50

UL/LN/HS-4-3 75To Fit Cable Ladder with

2mm Clearance

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

93

Steel Cable Ladder - Horizontal Splice PlateType: UL/LN/HS-4

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Steel Cable Ladder

9mm Sq

and Flat Washer

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

Totsl 4 Sets Per Connection

H

23

45

2345180

44

14

Splice Plate and Fixture

Application

Page 95: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

94

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LN/VAS-6

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/VAS-6-4 100

UL/LN/VAS-6-5 125

UL/LN/VAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Total 6 Sets Per Connection

M8 x 20 With Hex Nut

and Flat Washer

Cup Head Sq Neck Screw

180

2245

100

H

90

ø12

9 Sq

M8 x 20 With Hex Nut

and Flat Washer

Hex Screw

Total 1 Set Per Connection

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 96: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

95

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LN/VAS-4

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/VAS-4-2 50

UL/LN/VAS-4-3 75To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

M10 x 20 With Hex Nut

Hex Screw

Total 4 Sets Per Connection

and Flat Washer

Total 1 Set Per Connection

and Flat Washer

180

45

22ø12

100

90

9 Sq

H

14

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 97: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

96

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LN/HAS-6

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/HAS-6-4 100

UL/LN/HAS-6-5 125

UL/LN/HAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

250

12H

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

90º

92

4534

4534

and Flat Washer

Total 6 Sets Per Connection

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 98: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

97

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

and Flat Washer

250

45

92

45

H

12

Total 4 Sets Per Connection

90º

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LN/HAS-4

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/HAS-4-2 50

UL/LN/HAS-4-3 75

Splice Plate and Fixture

Application

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 99: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

98

Steel Cable Ladder - End PlateType: UL/LN/EP-6

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/EP-6-4 100

UL/LN/EP-6-5 125

UL/LN/EP-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

W

89

H

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

and Flat Washer

Total 4 Sets Per End Plate

End Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 100: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

99

W

89

H

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

Total 4 Sets Per End Plate

and Flat Washer

Steel Cable Ladder - End PlateType: UL/LN/EP-4

Dimension in MillimetreAbbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LN/EP-4-2 50

UL/LN/EP-4-3 75

End Plate with Fixture

Application

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 101: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

100

HOLD DOWN CLAMP WITH FIXTURE

With M8 x 20 Hex Screw

M8 Spring Nut45

42

ULISTRUT

CABLE LADDER

and Flat Washer

Hold Down Clamp

SUPPORT

Steel Cable Ladder - Hold Down ClampType: UL/L-CP

Dimension in Millimetre

When ordering please indicate Material and Finish.

Components Ref. Description Thickness Finish

UL/L-CP Hold Down Clamp 4mm

Clamp and Fixture

Application

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 102: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

101

RUNG DETAIL

CONNECTION SLOT DETAIL

CONNECTION SLOT DETAIL

w

SIDE RAIL SECTION

W

ø8 X 20

B2

B1

For 100mm - 125mm - 150mm heigthCable Ladder

22

45

ø9 X 18

H

45

22

ø9 X 18

For 50mm and 75mm heightCable Ladder

H

Standard Spacing 25

24

40

20

20

Steel Cable Ladder - StraightType: UL/LG/ST

Components Ref. H W B1 B2 L Thickness Finish

UL/LG/ST/2-6 50 150 150 300 3000 1.5

UL/LG/ST/2-8 50 200 150 300 3000 1.5

UL/LG/ST/2-10 50 250 150 300 3000 1.5

UL/LG/ST/2-12 50 300 150 300 3000 1.5

UL/LG/ST/3-6 75 150 150 300 3000 1.5

UL/LG/ST/3-8 75 200 150 300 3000 1.5

UL/LG/ST/3-10 75 250 150 300 3000 1.5

UL/LG/ST/3-12 75 300 150 300 3000 1.5

UL/LG/ST/4-6 100 150 150 300 3000 2.0

UL/LG/ST/4-8 100 200 150 300 3000 2.0

UL/LG/ST/4-10 100 250 150 300 3000 2.0

UL/LG/ST/4-12 100 300 150 300 3000 2.0

UL/LG/ST/4-16 100 400 150 300 3000 2.0

UL/LG/ST/4-18 100 450 150 300 3000 2.0

UL/LG/ST/4-20 100 500 150 300 3000 2.0

UL/LG/ST/4-24 100 600 150 300 3000 2.0

UL/LG/ST/4-30 100 750 150 300 3000 2.0

UL/LG/ST/4-36 100 900 150 300 3000 2.0

UL/LG/ST/4-40 100 1000 150 300 3000 2.0

UL/LG/ST/5-8 125 200 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. H W B1 B2 L Thickness Finish

UL/LG/ST/5-10 125 250 150 300 3000 2.0

UL/LG/ST/5-12 125 300 150 300 3000 2.0

UL/LG/ST/5-16 125 400 150 300 3000 2.0

UL/LG/ST/5-18 125 450 150 300 3000 2.0

UL/LG/ST/5-20 125 500 150 300 3000 2.0

UL/LG/ST/5-24 125 600 150 300 3000 2.0

UL/LG/ST/5-30 125 750 150 300 3000 2.0

UL/LG/ST/5-36 125 900 150 300 3000 2.0

UL/LG/ST/5-40 125 1000 150 300 3000 2.0

UL/LG/ST/6-8 150 200 150 300 3000 2.0

UL/LG/ST/6-10 150 250 150 300 3000 2.0

UL/LG/ST/6-12 150 300 150 300 3000 2.0

UL/LG/ST/6-16 150 400 150 300 3000 2.0

UL/LG/ST/6-18 150 450 150 300 3000 2.0

UL/LG/ST/6-20 150 500 150 300 3000 2.0

UL/LG/ST/6-24 150 600 150 300 3000 2.0

UL/LG/ST/6-30 150 750 150 300 3000 2.0

UL/LG/ST/6-32 150 800 150 300 3000 2.0

UL/LG/ST/6-36 150 900 150 300 3000 2.0

UL/LG/ST/6-40 150 1000 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height L - Length

When ordering please indicate Material and Finish.We also supply other sizes with the same Side Rail, Rung Profile and various number of Connection Slots.

Steel Cable Ladder

Page 103: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

102

Steel Cable Ladder - 900 ElbowType: UL/LG/EL90

Components Ref. H W Thickness R (Radii) Finish

UL/LG/EL90/2-6 50 150

UL/LG/EL90/2-8 50 200

UL/LG/EL90/2-10 50 250

UL/LG/EL90/2-12 50 300

UL/LG/EL90/3-6 75 150

UL/LG/EL90/3-8 75 200

UL/LG/EL90/3-10 75 250

UL/LG/EL90/3-12 75 300

UL/LG/EL90/4-6 100 150

UL/LG/EL90/4-8 100 200

UL/LG/EL90/4-10 100 250

UL/LG/EL90/4-12 100 300

UL/LG/EL90/4-16 100 400

UL/LG/EL90/4-18 100 450

UL/LG/EL90/4-20 100 500

UL/LG/EL90/4-24 100 600

UL/LG/EL90/4-30 100 750

UL/LG/EL90/4-36 100 900

UL/LG/EL90/4-40 100 1000

UL/LG/EL90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LG/EL90/5-10 125 250

UL/LG/EL90/5-12 125 300

UL/LG/EL90/5-16 125 400

UL/LG/EL90/5-18 125 450

UL/LG/EL90/5-20 125 500

UL/LG/EL90/5-24 125 600

UL/LG/EL90/5-30 125 750

UL/LG/EL90/5-36 125 900

UL/LG/EL90/5-40 125 1000

UL/LG/EL90/6-8 150 200

UL/LG/EL90/6-10 150 250

UL/LG/EL90/6-12 150 300

UL/LG/EL90/6-16 150 400

UL/LG/EL90/6-18 150 450

UL/LG/EL90/6-20 150 500

UL/LG/EL90/6-24 150 600

UL/LG/EL90/6-30 150 750

UL/LG/EL90/6-32 150 800

UL/LG/EL90/6-36 150 900

UL/LG/EL90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

90º

W150

R

150

H

B

Mid-section

Page 104: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

103

W

H

R 150150

45º

B

Mid-Section

Steel Cable Ladder - 450 ElbowType: UL/LG/EL45

Components Ref. H W Thickness R (Radii) Finish

UL/LG/EL45/2-6 50 150

UL/LG/EL45/2-8 50 200

UL/LG/EL45/2-10 50 250

UL/LG/EL45/2-12 50 300

UL/LG/EL45/3-6 75 150

UL/LG/EL45/3-8 75 200

UL/LG/EL45/3-10 75 250

UL/LG/EL45/3-12 75 300

UL/LG/EL45/4-6 100 150

UL/LG/EL45/4-8 100 200

UL/LG/EL45/4-10 100 250

UL/LG/EL45/4-12 100 300

UL/LG/EL45/4-16 100 400

UL/LG/EL45/4-18 100 450

UL/LG/EL45/4-20 100 500

UL/LG/EL45/4-24 100 600

UL/LG/EL45/4-30 100 750

UL/LG/EL45/4-36 100 900

UL/LG/EL45/4-40 100 1000

UL/LG/EL45/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LG/EL45/5-10 125 250

UL/LG/EL45/5-12 125 300

UL/LG/EL45/5-16 125 400

UL/LG/EL45/5-18 125 450

UL/LG/EL45/5-20 125 500

UL/LG/EL45/5-24 125 600

UL/LG/EL45/5-30 125 750

UL/LG/EL45/5-36 125 900

UL/LG/EL45/5-40 125 1000

UL/LG/EL45/6-8 150 200

UL/LG/EL45/6-10 150 250

UL/LG/EL45/6-12 150 300

UL/LG/EL45/6-16 150 400

UL/LG/EL45/6-18 150 450

UL/LG/EL45/6-20 150 500

UL/LG/EL45/6-24 150 600

UL/LG/EL45/6-30 150 750

UL/LG/EL45/6-32 150 800

UL/LG/EL45/6-36 150 900

UL/LG/EL45/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 105: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

104

R

90º

150W1 150 W2

H

B

Steel Cable Ladder - Horizontal Equal TeeType: UL/LG/ET

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/ET/2-6 50 150 150

UL/LG/ET/2-8 50 200 200

UL/LG/ET/2-10 50 250 250

UL/LG/ET/2-12 50 300 300

UL/LG/ET/3-6 75 150 150

UL/LG/ET/3-8 75 200 200

UL/LG/ET/3-10 75 250 250

UL/LG/ET/3-12 75 300 300

UL/LG/ET/4-6 100 150 150

UL/LG/ET/4-8 100 200 200

UL/LG/ET/4-10 100 250 250

UL/LG/ET/4-12 100 300 300

UL/LG/ET/4-16 100 400 400

UL/LG/ET/4-18 100 450 450

UL/LG/ET/4-20 100 500 500

UL/LG/ET/4-24 100 600 600

UL/LG/ET/4-30 100 750 750

UL/LG/ET/4-36 100 900 900

UL/LG/ET/4-40 100 1000 1000

UL/LG/ET/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/ET/5-10 125 250 250

UL/LG/ET/5-12 125 300 300

UL/LG/ET/5-16 125 400 400

UL/LG/ET/5-18 125 450 450

UL/LG/ET/5-20 125 500 500

UL/LG/ET/5-24 125 600 600

UL/LG/ET/5-30 125 750 750

UL/LG/ET/5-36 125 900 900

UL/LG/ET/5-40 125 1000 1000

UL/LG/ET/6-8 150 200 200

UL/LG/ET/6-10 150 250 250

UL/LG/ET/6-12 150 300 300

UL/LG/ET/6-16 150 400 400

UL/LG/ET/6-18 150 450 450

UL/LG/ET/6-20 150 500 500

UL/LG/ET/6-24 150 600 600

UL/LG/ET/6-30 150 750 750

UL/LG/ET/6-32 150 800 800

UL/LG/ET/6-36 150 900 900

UL/LG/ET/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 106: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

105

H

W2150

90º

R

150

W1

B

Steel Cable Ladder - Unequal TeeType: UL/LG/UT

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/UT/2-6 50 150

UL/LG/UT/2-8 50 200

UL/LG/UT/2-10 50 250

UL/LG/UT/2-12 50 300

UL/LG/UT/3-6 75 150

UL/LG/UT/3-8 75 200

UL/LG/UT/3-10 75 250

UL/LG/UT/3-12 75 300

UL/LG/UT/4-6 100 150

UL/LG/UT/4-8 100 200

UL/LG/UT/4-10 100 250

UL/LG/UT/4-12 100 300

UL/LG/UT/4-16 100 400

UL/LG/UT/4-18 100 450

UL/LG/UT/4-20 100 500

UL/LG/UT/4-24 100 600

UL/LG/UT/4-30 100 750

UL/LG/UT/4-36 100 900

UL/LG/UT/4-40 100 1000

UL/LG/UT/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/UT/5-10 125 250

UL/LG/UT/5-12 125 300

UL/LG/UT/5-16 125 400

UL/LG/UT/5-18 125 450

UL/LG/UT/5-20 125 500

UL/LG/UT/5-24 125 600

UL/LG/UT/5-30 125 750

UL/LG/UT/5-36 125 900

UL/LG/UT/5-40 125 1000

UL/LG/UT/6-8 150 200

UL/LG/UT/6-10 150 250

UL/LG/UT/6-12 150 300

UL/LG/UT/6-16 150 400

UL/LG/UT/6-18 150 450

UL/LG/UT/6-20 150 500

UL/LG/UT/6-24 150 600

UL/LG/UT/6-30 150 750

UL/LG/UT/6-32 150 800

UL/LG/UT/6-36 150 900

UL/LG/UT/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 107: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

106

90º

150 W2150W1

H R

B

Steel Cable Ladder - Equal CrossesType: UL/LG/EC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/EC/2-6 50 150 150

UL/LG/EC/2-8 50 200 200

UL/LG/EC/2-10 50 250 250

UL/LG/EC/2-12 50 300 300

UL/LG/EC/3-6 75 150 150

UL/LG/EC/3-8 75 200 200

UL/LG/EC/3-10 75 250 250

UL/LG/EC/3-12 75 300 300

UL/LG/EC/4-6 100 150 150

UL/LG/EC/4-8 100 200 200

UL/LG/EC/4-10 100 250 250

UL/LG/EC/4-12 100 300 300

UL/LG/EC/4-16 100 400 400

UL/LG/EC/4-18 100 450 450

UL/LG/EC/4-20 100 500 500

UL/LG/EC/4-24 100 600 600

UL/LG/EC/4-30 100 750 750

UL/LG/EC/4-36 100 900 900

UL/LG/EC/4-40 100 1000 1000

UL/LG/EC/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/EC/5-10 125 250 250

UL/LG/EC/5-12 125 300 300

UL/LG/EC/5-16 125 400 400

UL/LG/EC/5-18 125 450 450

UL/LG/EC/5-20 125 500 500

UL/LG/EC/5-24 125 600 600

UL/LG/EC/5-30 125 750 750

UL/LG/EC/5-36 125 900 900

UL/LG/EC/5-40 125 1000 1000

UL/LG/EC/6-8 150 200 200

UL/LG/EC/6-10 150 250 250

UL/LG/EC/6-12 150 300 300

UL/LG/EC/6-16 150 400 400

UL/LG/EC/6-18 150 450 450

UL/LG/EC/6-20 150 500 500

UL/LG/EC/6-24 150 600 600

UL/LG/EC/6-30 150 750 750

UL/LG/EC/6-32 150 800 800

UL/LG/EC/6-36 150 900 900

UL/LG/EC/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 108: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

107

W2

150150 90º

RW1

H

B

Steel Cable Ladder - Unequal CrossesType: UL/LG/UC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/UC/2-6 50 150

UL/LG/UC/2-8 50 200

UL/LG/UC/2-10 50 250

UL/LG/UC/2-12 50 300

UL/LG/UC/3-6 75 150

UL/LG/UC/3-8 75 200

UL/LG/UC/3-10 75 250

UL/LG/UC/3-12 75 300

UL/LG/UC/4-6 100 150

UL/LG/UC/4-8 100 200

UL/LG/UC/4-10 100 250

UL/LG/UC/4-12 100 300

UL/LG/UC/4-16 100 400

UL/LG/UC/4-18 100 450

UL/LG/UC/4-20 100 500

UL/LG/UC/4-24 100 600

UL/LG/UC/4-30 100 750

UL/LG/UC/4-36 100 900

UL/LG/UC/4-40 100 1000

UL/LG/UC/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LG/UC/5-10 125 250

UL/LG/UC/5-12 125 300

UL/LG/UC/5-16 125 400

UL/LG/UC/5-18 125 450

UL/LG/UC/5-20 125 500

UL/LG/UC/5-24 125 600

UL/LG/UC/5-30 125 750

UL/LG/UC/5-36 125 900

UL/LG/UC/5-40 125 1000

UL/LG/UC/6-8 150 200

UL/LG/UC/6-10 150 250

UL/LG/UC/6-12 150 300

UL/LG/UC/6-16 150 400

UL/LG/UC/6-18 150 450

UL/LG/UC/6-20 150 500

UL/LG/UC/6-24 150 600

UL/LG/UC/6-30 150 750

UL/LG/UC/6-32 150 800

UL/LG/UC/6-36 150 900

UL/LG/UC/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 109: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

108

H

150

R

15

0

W

90º

B

Steel Cable Ladder - External RiserType: UL/LG/ER

Components Ref. H W Thickness R (Radii) Finish

UL/LG/ER/2-6 50 150

UL/LG/ER/2-8 50 200

UL/LG/ER/2-10 50 250

UL/LG/ER/2-12 50 300

UL/LG/ER/3-6 75 150

UL/LG/ER/3-8 75 200

UL/LG/ER/3-10 75 250

UL/LG/ER/3-12 75 300

UL/LG/ER/4-6 100 150

UL/LG/ER/4-8 100 200

UL/LG/ER/4-10 100 250

UL/LG/ER/4-12 100 300

UL/LG/ER/4-16 100 400

UL/LG/ER/4-18 100 450

UL/LG/ER/4-20 100 500

UL/LG/ER/4-24 100 600

UL/LG/ER/4-30 100 750

UL/LG/ER/4-36 100 900

UL/LG/ER/4-40 100 1000

UL/LG/ER/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LG/ER/5-10 125 250

UL/LG/ER/5-12 125 300

UL/LG/ER/5-16 125 400

UL/LG/ER/5-18 125 450

UL/LG/ER/5-20 125 500

UL/LG/ER/5-24 125 600

UL/LG/ER/5-30 125 750

UL/LG/ER/5-36 125 900

UL/LG/ER/5-40 125 1000

UL/LG/ER/6-8 150 200

UL/LG/ER/6-10 150 250

UL/LG/ER/6-12 150 300

UL/LG/ER/6-16 150 400

UL/LG/ER/6-18 150 450

UL/LG/ER/6-20 150 500

UL/LG/ER/6-24 150 600

UL/LG/ER/6-30 150 750

UL/LG/ER/6-32 150 800

UL/LG/ER/6-36 150 900

UL/LG/ER/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 110: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

109

R

H

W150

90º

15

0

B

Steel Cable Ladder - Internal RiserType: UL/LG/IR

Components Ref. H W Thickness R (Radii) Finish

UL/LG/IR/2-6 50 150

UL/LG/IR/2-8 50 200

UL/LG/IR/2-10 50 250

UL/LG/IR/2-12 50 300

UL/LG/IR/3-6 75 150

UL/LG/IR/3-8 75 200

UL/LG/IR/3-10 75 250

UL/LG/IR/3-12 75 300

UL/LG/IR/4-6 100 150

UL/LG/IR/4-8 100 200

UL/LG/IR/4-10 100 250

UL/LG/IR/4-12 100 300

UL/LG/IR/4-16 100 400

UL/LG/IR/4-18 100 450

UL/LG/IR/4-20 100 500

UL/LG/IR/4-24 100 600

UL/LG/IR/4-30 100 750

UL/LG/IR/4-36 100 900

UL/LG/IR/4-40 100 1000

UL/LG/IR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LG/IR/5-10 125 250

UL/LG/IR/5-12 125 300

UL/LG/IR/5-16 125 400

UL/LG/IR/5-18 125 450

UL/LG/IR/5-20 125 500

UL/LG/IR/5-24 125 600

UL/LG/IR/5-30 125 750

UL/LG/IR/5-36 125 900

UL/LG/IR/5-40 125 1000

UL/LG/IR/6-8 150 200

UL/LG/IR/6-10 150 250

UL/LG/IR/6-12 150 300

UL/LG/IR/6-16 150 400

UL/LG/IR/6-18 150 450

UL/LG/IR/6-20 150 500

UL/LG/IR/6-24 150 600

UL/LG/IR/6-30 150 750

UL/LG/IR/6-32 150 800

UL/LG/IR/6-36 150 900

UL/LG/IR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 111: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

110

W

R

150

H

15

0

B

Steel Cable Ladder - 900 Vertical TeeType: UL/LG/VT90

Components Ref. H W Thickness R (Radii) Finish

UL/LG/VT90/2-6 50 150

UL/LG/VT90/2-8 50 200

UL/LG/VT90/2-10 50 250

UL/LG/VT90/2-12 50 300

UL/LG/VT90/3-6 75 150

UL/LG/VT90/3-8 75 200

UL/LG/VT90/3-10 75 250

UL/LG/VT90/3-12 75 300

UL/LG/VT90/4-6 100 150

UL/LG/VT90/4-8 100 200

UL/LG/VT90/4-10 100 250

UL/LG/VT90/4-12 100 300

UL/LG/VT90/4-16 100 400

UL/LG/VT90/4-18 100 450

UL/LG/VT90/4-20 100 500

UL/LG/VT90/4-24 100 600

UL/LG/VT90/4-30 100 750

UL/LG/VT90/4-36 100 900

UL/LG/VT90/4-40 100 1000

UL/LG/VT90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LG/VT90/5-10 125 250

UL/LG/VT90/5-12 125 300

UL/LG/VT90/5-16 125 400

UL/LG/VT90/5-18 125 450

UL/LG/VT90/5-20 125 500

UL/LG/VT90/5-24 125 600

UL/LG/VT90/5-30 125 750

UL/LG/VT90/5-36 125 900

UL/LG/VT90/5-40 125 1000

UL/LG/VT90/6-8 150 200

UL/LG/VT90/6-10 150 250

UL/LG/VT90/6-12 150 300

UL/LG/VT90/6-16 150 400

UL/LG/VT90/6-18 150 450

UL/LG/VT90/6-20 150 500

UL/LG/VT90/6-24 150 600

UL/LG/VT90/6-30 150 750

UL/LG/VT90/6-32 150 800

UL/LG/VT90/6-36 150 900

UL/LG/VT90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 112: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

111

W2

150

H

150

W1

B

Steel Cable Ladder - Left Offset ReducerType: UL/LG/LR

Components Ref. H W1 W2 Thickness Finish

UL/LG/LR/2-6 50 150

UL/LG/LR/2-8 50 200

UL/LG/LR/2-10 50 250

UL/LG/LR/2-12 50 300

UL/LG/LR/3-6 75 150

UL/LG/LR/3-8 75 200

UL/LG/LR/3-10 75 250

UL/LG/LR/3-12 75 300

UL/LG/LR/4-6 100 150

UL/LG/LR/4-8 100 200

UL/LG/LR/4-10 100 250

UL/LG/LR/4-12 100 300

UL/LG/LR/4-16 100 400

UL/LG/LR/4-18 100 450

UL/LG/LR/4-20 100 500

UL/LG/LR/4-24 100 600

UL/LG/LR/4-30 100 750

UL/LG/LR/4-36 100 900

UL/LG/LR/4-40 100 1000

UL/LG/LR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LG/LR/5-10 125 250

UL/LG/LR/5-12 125 300

UL/LG/LR/5-16 125 400

UL/LG/LR/5-18 125 450

UL/LG/LR/5-20 125 500

UL/LG/LR/5-24 125 600

UL/LG/LR/5-30 125 750

UL/LG/LR/5-36 125 900

UL/LG/LR/5-40 125 1000

UL/LG/LR/6-8 150 200

UL/LG/LR/6-10 150 250

UL/LG/LR/6-12 150 300

UL/LG/LR/6-16 150 400

UL/LG/LR/6-18 150 450

UL/LG/LR/6-20 150 500

UL/LG/LR/6-24 150 600

UL/LG/LR/6-30 150 750

UL/LG/LR/6-32 150 800

UL/LG/LR/6-36 150 900

UL/LG/LR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 113: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

112

W1

W2

H

150

150

B

Steel Cable Ladder - Right Offset ReducerType: UL/LG/RR

Components Ref. H W1 W2 Thickness Finish

UL/LG/RR/2-6 50 150

UL/LG/RR/2-8 50 200

UL/LG/RR/2-10 50 250

UL/LG/RR/2-12 50 300

UL/LG/RR/3-6 75 150

UL/LG/RR/3-8 75 200

UL/LG/RR/3-10 75 250

UL/LG/RR/3-12 75 300

UL/LG/RR/4-6 100 150

UL/LG/RR/4-8 100 200

UL/LG/RR/4-10 100 250

UL/LG/RR/4-12 100 300

UL/LG/RR/4-16 100 400

UL/LG/RR/4-18 100 450

UL/LG/RR/4-20 100 500

UL/LG/RR/4-24 100 600

UL/LG/RR/4-30 100 750

UL/LG/RR/4-36 100 900

UL/LG/RR/4-40 100 1000

UL/LG/RR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LG/RR/5-10 125 250

UL/LG/RR/5-12 125 300

UL/LG/RR/5-16 125 400

UL/LG/RR/5-18 125 450

UL/LG/RR/5-20 125 500

UL/LG/RR/5-24 125 600

UL/LG/RR/5-30 125 750

UL/LG/RR/5-36 125 900

UL/LG/RR/5-40 125 1000

UL/LG/RR/6-8 150 200

UL/LG/RR/6-10 150 250

UL/LG/RR/6-12 150 300

UL/LG/RR/6-16 150 400

UL/LG/RR/6-18 150 450

UL/LG/RR/6-20 150 500

UL/LG/RR/6-24 150 600

UL/LG/RR/6-30 150 750

UL/LG/RR/6-32 150 800

UL/LG/RR/6-36 150 900

UL/LG/RR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 114: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

113

W1

W2

H

150

150

B

Steel Cable Ladder - Straight Offset ReducerType: UL/LG/SR

Components Ref. H W1 W2 Thickness Finish

UL/LG/SR/2-6 50 150

UL/LG/SR/2-8 50 200

UL/LG/SR/2-10 50 250

UL/LG/SR/2-12 50 300

UL/LG/SR/3-6 75 150

UL/LG/SR/3-8 75 200

UL/LG/SR/3-10 75 250

UL/LG/SR/3-12 75 300

UL/LG/SR/4-6 100 150

UL/LG/SR/4-8 100 200

UL/LG/SR/4-10 100 250

UL/LG/SR/4-12 100 300

UL/LG/SR/4-16 100 400

UL/LG/SR/4-18 100 450

UL/LG/SR/4-20 100 500

UL/LG/SR/4-24 100 600

UL/LG/SR/4-30 100 750

UL/LG/SR/4-36 100 900

UL/LG/SR/4-40 100 1000

UL/LG/SR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LG/SR/5-10 125 250

UL/LG/SR/5-12 125 300

UL/LG/SR/5-16 125 400

UL/LG/SR/5-18 125 450

UL/LG/SR/5-20 125 500

UL/LG/SR/5-24 125 600

UL/LG/SR/5-30 125 750

UL/LG/SR/5-36 125 900

UL/LG/SR/5-40 125 1000

UL/LG/SR/6-8 150 200

UL/LG/SR/6-10 150 250

UL/LG/SR/6-12 150 300

UL/LG/SR/6-16 150 400

UL/LG/SR/6-18 150 450

UL/LG/SR/6-20 150 500

UL/LG/SR/6-24 150 600

UL/LG/SR/6-30 150 750

UL/LG/SR/6-32 150 800

UL/LG/SR/6-36 150 900

UL/LG/SR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 115: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

114

H

and Flat Washer

M6 x 16 With Hex Nut

Pan Head Slotted Screw

Fixture

STRAIGHT DIVIDER SECTION

Divider

Cable Ladder

ø8 X 18

L

H1

30

7

H1

10

APPLICATION

Steel Cable Ladder - Straight DividerType: UL/LG/SD

Dimension in Millimetre Abbreviation: H - Height L - Length

When ordering Material and Finish as straight cable ladder please also indicate Length (L).

Steel Cable Ladder

Components Ref. H H1 Thickness L Finish

UL/LG/SD-2 50 20 1.5

UL/LG/SD-3 75 45 1.5

UL/LG/SD-4 100 70 2.0

UL/LG/SD-5 125 95 2.0

UL/LG/SD-6 150 120 2.0

Hot Dip Galvanised

Epoxy or Polyester Coated

Stainless

1500 or 3000

Page 116: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

115

20

CABLE LADDER AND COVER SECTION

33

COVER CLAMP

4

M8 x 20 Hex screw

25

28 35

APPLICATION

L

Recess for overlapping

Stiffener for cover withwidth of 800mm or more

COVER

H

Cover

Cover Clamp

Ladder

W1

W

Steel Cable Ladder - Straight CoverType: UL/LG/SC

Components Ref. H W W1 Thickness L Finish

UL/LG/SC-1 16 150 195 1.5

UL/LG/SC-2 16 200 245 1.5

UL/LG/SC-3 16 250 295 1.5

UL/LG/SC-4 16 300 345 1.5

UL/LG/SC-5 16 150 195 1.5

UL/LG/SC-6 16 200 245 1.5

UL/LG/SC-7 16 250 295 1.5

UL/LG/SC-8 16 300 345 1.5

UL/LG/SC-9 16 150 195 2.0

UL/LG/SC-10 16 200 245 2.0

UL/LG/SC-11 16 250 295 2.0

UL/LG/SC-12 16 300 345 2.0

UL/LG/SC-13 16 400 445 2.0

UL/LG/SC-14 16 450 495 2.0

UL/LG/SC-15 16 500 545 2.0

UL/LG/SC-16 16 600 645 2.0

UL/LG/SC-17 16 750 795 2.0

UL/LG/SC-18 16 900 945 2.0

UL/LG/SC-19 16 1000 1045 2.0

UL/LG/SC-20 16 200 245 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Components Ref. H W W1 Thickness L Finish

UL/LG/SC-21 16 250 295 2.0

UL/LG/SC-22 16 300 345 2.0

UL/LG/SC-23 16 400 445 2.0

UL/LG/SC-24 16 450 495 2.0

UL/LG/SC-25 16 500 545 2.0

UL/LG/SC-26 16 600 645 2.0

UL/LG/SC-27 16 750 795 2.0

UL/LG/SC-28 16 900 945 2.0

UL/LG/SC-29 16 1000 1045 2.0

UL/LG/SC-30 16 200 245 2.0

UL/LG/SC-31 16 250 295 2.0

UL/LG/SC-32 16 300 345 2.0

UL/LG/SC-33 16 400 445 2.0

UL/LG/SC-34 16 450 495 2.0

UL/LG/SC-35 16 500 545 2.0

UL/LG/SC-36 16 600 645 2.0

UL/LG/SC-37 16 750 795 2.0

UL/LG/SC-38 16 800 845 2.0

UL/LG/SC-39 16 900 945 2.0

UL/LG/SC-40 16 1000 1045 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Dimension in Millimetre Abbreviation: H - Height L - Length W - Width

When ordering Material and Finish as straight cable ladder please also indicateLength (L).

Components Ref. Description

UL/LZ/CMP Cable Ladder Cover Clamp

Steel Cable Ladder

Page 117: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

116

and Flat Washer

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

Total 6 Sets Per Connection

9mm Sq

23

45180

44

45

23

14

H

Steel Cable Ladder - Horizontal Splice PlateType: UL/LG/HS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/HS-6-4 100

UL/LG/HS-6-5 125

UL/LG/HS-6-6 150

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Page 118: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

117

Steel Cable Ladder - Horizontal Splice PlateType: UL/LG/HS-4

Steel Cable Ladder

9mm Sq

14

2345180

44

45

23

12

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

and Flat Washer

Total 4 Sets Per Connection

H

Splice Plate and Fixture

Application

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/HS-4-2 50

UL/LG/HS-4-3 75To Fit Cable Ladder with

2mm Clearance

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 119: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

118

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LG/VAS-6

Steel Cable Ladder

180

2245

100

H

90

ø12

9 Sq

Cup Head Sq Neck Screw

and Flat Washer

M8 x 20 With Hex Nut

Total 6 Sets Per Connection

M8 x 20 With Hex Nut

and Flat Washer

Hex Screw

Total 1 Set Per Connection

12

Splice Plate and Fixture

Application

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/VAS-6-4 100

UL/LG/VAS-6-5 125

UL/LG/VAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 120: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

119

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LG/VAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/VAS-4-2 50

UL/LG/VAS-4-3 75To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

M10 x 20 With Hex Nut

Hex Screw

Total 1 Set Per Connection

Total 4 Sets Per Connection

and Flat Washer

and Flat Washer

180

45

22

H

ø12

100

90

9 Sq

12

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 121: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

120

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LG/HAS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/HAS-6-4 100

UL/LG/HAS-6-5 125

UL/LG/HAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

250

90º

12

H

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

and Flat Washer

Total 6 Sets Per Connection

ø13 x 3545

92

45

Splice Plate and Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 122: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

121

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

250

90º

12

H

and Flat Washer

Total 4 Sets Per Connection

ø13 x 359

45

45

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LG/HAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/HAS-4-2 50

UL/LG/HAS-4-3 75

Splice Plate and Fixture

Application

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 123: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

122

Steel Cable Ladder - End PlateType: UL/LG/EP-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/EP-6-4 100

UL/LG/EP-6-5 125

UL/LG/EP-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

W

89

H

and Flat Washer

Total 4 Sets Per End Plate

End Plate with Fixture

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 124: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

W

H

89

and Flat Washer

Total 4 Sets Per End Plate

123

Steel Cable Ladder - End PlateType: UL/LG/EP-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LG/EP-4-2 50

UL/LG/EP-4-3 75

End Plate with Fixture

Application

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 125: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

124

ULISTRUT

CABLE LADDER

HOLD DOWN CLAMP WITH FIXTURE

SUPPORT

With M8 x 20 Hex Screw

M8 Spring Nut45

42

and Flat Washer

Hold Down Clamp

Steel Cable Ladder - Hold Down ClampType: UL/L-CP

Dimension in Millimetre

When ordering please indicate Material and Finish.

Components Ref. Description Thickness Finish

UL/L-CP Hold Down Clamp 4mm

Clamp and Fixture

Application

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 126: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

125

CONNECTION SLOT DETAIL

CONNECTION SLOT DETAIL

SIDE RAIL SECTION

H

22

45

ø9 X 18

22

45

ø9 X 18

For 50mm and 75mm heightCable Ladder

For 100mm - 125mm - 150mm heigthCable Ladder

L

B2

B1

W

H

25

25

RUNG DETAIL

W24

40

ø8 X 20

Steel Cable Ladder - StraightType: UL/LC/ST

Components Ref. H W B1 B2 L Thickness Finish

UL/LC/ST/2-6 50 150 150 300 3000 1.5

UL/LC/ST/2-8 50 200 150 300 3000 1.5

UL/LC/ST/2-10 50 250 150 300 3000 1.5

UL/LC/ST/2-12 50 300 150 300 3000 1.5

UL/LC/ST/3-6 75 150 150 300 3000 1.5

UL/LC/ST/3-8 75 200 150 300 3000 1.5

UL/LC/ST/3-10 75 250 150 300 3000 1.5

UL/LC/ST/3-12 75 300 150 300 3000 1.5

UL/LC/ST/4-6 100 150 150 300 3000 2.0

UL/LC/ST/4-8 100 200 150 300 3000 2.0

UL/LC/ST/4-10 100 250 150 300 3000 2.0

UL/LC/ST/4-12 100 300 150 300 3000 2.0

UL/LC/ST/4-16 100 400 150 300 3000 2.0

UL/LC/ST/4-18 100 450 150 300 3000 2.0

UL/LC/ST/4-20 100 500 150 300 3000 2.0

UL/LC/ST/4-24 100 600 150 300 3000 2.0

UL/LC/ST/4-30 100 750 150 300 3000 2.0

UL/LC/ST/4-36 100 900 150 300 3000 2.0

UL/LC/ST/4-40 100 1000 150 300 3000 2.0

UL/LC/ST/5-8 125 200 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Components Ref. H W B1 B2 L Thickness Finish

UL/LC/ST/5-10 125 250 150 300 3000 2.0

UL/LC/ST/5-12 125 300 150 300 3000 2.0

UL/LC/ST/5-16 125 400 150 300 3000 2.0

UL/LC/ST/5-18 125 450 150 300 3000 2.0

UL/LC/ST/5-20 125 500 150 300 3000 2.0

UL/LC/ST/5-24 125 600 150 300 3000 2.0

UL/LC/ST/5-30 125 750 150 300 3000 2.0

UL/LC/ST/5-36 125 900 150 300 3000 2.0

UL/LC/ST/5-40 125 1000 150 300 3000 2.0

UL/LC/ST/6-8 150 200 150 300 3000 2.0

UL/LC/ST/6-10 150 250 150 300 3000 2.0

UL/LC/ST/6-12 150 300 150 300 3000 2.0

UL/LC/ST/6-16 150 400 150 300 3000 2.0

UL/LC/ST/6-18 150 450 150 300 3000 2.0

UL/LC/ST/6-20 150 500 150 300 3000 2.0

UL/LC/ST/6-24 150 600 150 300 3000 2.0

UL/LC/ST/6-30 150 750 150 300 3000 2.0

UL/LC/ST/6-32 150 800 150 300 3000 2.0

UL/LC/ST/6-36 150 900 150 300 3000 2.0

UL/LC/ST/6-40 150 1000 150 300 3000 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height L - Length

When ordering please indicate Material and Finish.We also supply other sizes with the same Side Rail, Rung Profile and various number of Connection Slots.

Steel Cable Ladder

Page 127: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

126

Steel Cable Ladder - 900 ElbowType: UL/LC/EL90

Components Ref. H W Thickness R (Radii) Finish

UL/LC/EL90/2-6 50 150

UL/LC/EL90/2-8 50 200

UL/LC/EL90/2-10 50 250

UL/LC/EL90/2-12 50 300

UL/LC/EL90/3-6 75 150

UL/LC/EL90/3-8 75 200

UL/LC/EL90/3-10 75 250

UL/LC/EL90/3-12 75 300

UL/LC/EL90/4-6 100 150

UL/LC/EL90/4-8 100 200

UL/LC/EL90/4-10 100 250

UL/LC/EL90/4-12 100 300

UL/LC/EL90/4-16 100 400

UL/LC/EL90/4-18 100 450

UL/LC/EL90/4-20 100 500

UL/LC/EL90/4-24 100 600

UL/LC/EL90/4-30 100 750

UL/LC/EL90/4-36 100 900

UL/LC/EL90/4-40 100 1000

UL/LC/EL90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LC/EL90/5-10 125 250

UL/LC/EL90/5-12 125 300

UL/LC/EL90/5-16 125 400

UL/LC/EL90/5-18 125 450

UL/LC/EL90/5-20 125 500

UL/LC/EL90/5-24 125 600

UL/LC/EL90/5-30 125 750

UL/LC/EL90/5-36 125 900

UL/LC/EL90/5-40 125 1000

UL/LC/EL90/6-8 150 200

UL/LC/EL90/6-10 150 250

UL/LC/EL90/6-12 150 300

UL/LC/EL90/6-16 150 400

UL/LC/EL90/6-18 150 450

UL/LC/EL90/6-20 150 500

UL/LC/EL90/6-24 150 600

UL/LC/EL90/6-30 150 750

UL/LC/EL90/6-32 150 800

UL/LC/EL90/6-36 150 900

UL/LC/EL90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

150

R

150W

90º

H

Mid-sectionB

Page 128: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

127

W

R 150150

45º

H

B

Mid-Section

Steel Cable Ladder - 450 ElbowType: UL/LC/EL45

Components Ref. H W Thickness R (Radii) Finish

UL/LC/EL45/2-6 50 150

UL/LC/EL45/2-8 50 200

UL/LC/EL45/2-10 50 250

UL/LC/EL45/2-12 50 300

UL/LC/EL45/3-6 75 150

UL/LC/EL45/3-8 75 200

UL/LC/EL45/3-10 75 250

UL/LC/EL45/3-12 75 300

UL/LC/EL45/4-6 100 150

UL/LC/EL45/4-8 100 200

UL/LC/EL45/4-10 100 250

UL/LC/EL45/4-12 100 300

UL/LC/EL45/4-16 100 400

UL/LC/EL45/4-18 100 450

UL/LC/EL45/4-20 100 500

UL/LC/EL45/4-24 100 600

UL/LC/EL45/4-30 100 750

UL/LC/EL45/4-36 100 900

UL/LC/EL45/4-40 100 1000

UL/LC/EL45/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LC/EL45/5-10 125 250

UL/LC/EL45/5-12 125 300

UL/LC/EL45/5-16 125 400

UL/LC/EL45/5-18 125 450

UL/LC/EL45/5-20 125 500

UL/LC/EL45/5-24 125 600

UL/LC/EL45/5-30 125 750

UL/LC/EL45/5-36 125 900

UL/LC/EL45/5-40 125 1000

UL/LC/EL45/6-8 150 200

UL/LC/EL45/6-10 150 250

UL/LC/EL45/6-12 150 300

UL/LC/EL45/6-16 150 400

UL/LC/EL45/6-18 150 450

UL/LC/EL45/6-20 150 500

UL/LC/EL45/6-24 150 600

UL/LC/EL45/6-30 150 750

UL/LC/EL45/6-32 150 800

UL/LC/EL45/6-36 150 900

UL/LC/EL45/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 129: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

128

W2150W1

150

90º

R

H

B

Steel Cable Ladder - Horizontal Equal TeeType: UL/LC/ET

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/ET/2-6 50 150 150

UL/LC/ET/2-8 50 200 200

UL/LC/ET/2-10 50 250 250

UL/LC/ET/2-12 50 300 300

UL/LC/ET/3-6 75 150 150

UL/LC/ET/3-8 75 200 200

UL/LC/ET/3-10 75 250 250

UL/LC/ET/3-12 75 300 300

UL/LC/ET/4-6 100 150 150

UL/LC/ET/4-8 100 200 200

UL/LC/ET/4-10 100 250 250

UL/LC/ET/4-12 100 300 300

UL/LC/ET/4-16 100 400 400

UL/LC/ET/4-18 100 450 450

UL/LC/ET/4-20 100 500 500

UL/LC/ET/4-24 100 600 600

UL/LC/ET/4-30 100 750 750

UL/LC/ET/4-36 100 900 900

UL/LC/ET/4-40 100 1000 1000

UL/LC/ET/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/ET/5-10 125 250 250

UL/LC/ET/5-12 125 300 300

UL/LC/ET/5-16 125 400 400

UL/LC/ET/5-18 125 450 450

UL/LC/ET/5-20 125 500 500

UL/LC/ET/5-24 125 600 600

UL/LC/ET/5-30 125 750 750

UL/LC/ET/5-36 125 900 900

UL/LC/ET/5-40 125 1000 1000

UL/LC/ET/6-8 150 200 200

UL/LC/ET/6-10 150 250 250

UL/LC/ET/6-12 150 300 300

UL/LC/ET/6-16 150 400 400

UL/LC/ET/6-18 150 450 450

UL/LC/ET/6-20 150 500 500

UL/LC/ET/6-24 150 600 600

UL/LC/ET/6-30 150 750 750

UL/LC/ET/6-32 150 800 800

UL/LC/ET/6-36 150 900 900

UL/LC/ET/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 130: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

129

90º

RW1

150 W2150

H

B

Steel Cable Ladder - Unequal TeeType: UL/LC/UT

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/UT/2-6 50 150

UL/LC/UT/2-8 50 200

UL/LC/UT/2-10 50 250

UL/LC/UT/2-12 50 300

UL/LC/UT/3-6 75 150

UL/LC/UT/3-8 75 200

UL/LC/UT/3-10 75 250

UL/LC/UT/3-12 75 300

UL/LC/UT/4-6 100 150

UL/LC/UT/4-8 100 200

UL/LC/UT/4-10 100 250

UL/LC/UT/4-12 100 300

UL/LC/UT/4-16 100 400

UL/LC/UT/4-18 100 450

UL/LC/UT/4-20 100 500

UL/LC/UT/4-24 100 600

UL/LC/UT/4-30 100 750

UL/LC/UT/4-36 100 900

UL/LC/UT/4-40 100 1000

UL/LC/UT/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/UT/5-10 125 250

UL/LC/UT/5-12 125 300

UL/LC/UT/5-16 125 400

UL/LC/UT/5-18 125 450

UL/LC/UT/5-20 125 500

UL/LC/UT/5-24 125 600

UL/LC/UT/5-30 125 750

UL/LC/UT/5-36 125 900

UL/LC/UT/5-40 125 1000

UL/LC/UT/6-8 150 200

UL/LC/UT/6-10 150 250

UL/LC/UT/6-12 150 300

UL/LC/UT/6-16 150 400

UL/LC/UT/6-18 150 450

UL/LC/UT/6-20 150 500

UL/LC/UT/6-24 150 600

UL/LC/UT/6-30 150 750

UL/LC/UT/6-32 150 800

UL/LC/UT/6-36 150 900

UL/LC/UT/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 131: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

130

90º

RH

150W1150 W2

B

Steel Cable Ladder - Equal CrossesType: UL/LC/EC

Rung Spacing 300mm

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/EC/2-6 50 150 150

UL/LC/EC/2-8 50 200 200

UL/LC/EC/2-10 50 250 250

UL/LC/EC/2-12 50 300 300

UL/LC/EC/3-6 75 150 150

UL/LC/EC/3-8 75 200 200

UL/LC/EC/3-10 75 250 250

UL/LC/EC/3-12 75 300 300

UL/LC/EC/4-6 100 150 150

UL/LC/EC/4-8 100 200 200

UL/LC/EC/4-10 100 250 250

UL/LC/EC/4-12 100 300 300

UL/LC/EC/4-16 100 400 400

UL/LC/EC/4-18 100 450 450

UL/LC/EC/4-20 100 500 500

UL/LC/EC/4-24 100 600 600

UL/LC/EC/4-30 100 750 750

UL/LC/EC/4-36 100 900 900

UL/LC/EC/4-40 100 1000 1000

UL/LC/EC/5-8 125 200 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/EC/5-10 125 250 250

UL/LC/EC/5-12 125 300 300

UL/LC/EC/5-16 125 400 400

UL/LC/EC/5-18 125 450 450

UL/LC/EC/5-20 125 500 500

UL/LC/EC/5-24 125 600 600

UL/LC/EC/5-30 125 750 750

UL/LC/EC/5-36 125 900 900

UL/LC/EC/5-40 125 1000 1000

UL/LC/EC/6-8 150 200 200

UL/LC/EC/6-10 150 250 250

UL/LC/EC/6-12 150 300 300

UL/LC/EC/6-16 150 400 400

UL/LC/EC/6-18 150 450 450

UL/LC/EC/6-20 150 500 500

UL/LC/EC/6-24 150 600 600

UL/LC/EC/6-30 150 750 750

UL/LC/EC/6-32 150 800 800

UL/LC/EC/6-36 150 900 900

UL/LC/EC/6-40 150 1000 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Steel Cable Ladder

Page 132: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

131

W2

R

15090º

W1

H

150

B

Steel Cable Ladder - Unequal CrossesType: UL/LC/UC

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/UC/2-6 50 150

UL/LC/UC/2-8 50 200

UL/LC/UC/2-10 50 250

UL/LC/UC/2-12 50 300

UL/LC/UC/3-6 75 150

UL/LC/UC/3-8 75 200

UL/LC/UC/3-10 75 250

UL/LC/UC/3-12 75 300

UL/LC/UC/4-6 100 150

UL/LC/UC/4-8 100 200

UL/LC/UC/4-10 100 250

UL/LC/UC/4-12 100 300

UL/LC/UC/4-16 100 400

UL/LC/UC/4-18 100 450

UL/LC/UC/4-20 100 500

UL/LC/UC/4-24 100 600

UL/LC/UC/4-30 100 750

UL/LC/UC/4-36 100 900

UL/LC/UC/4-40 100 1000

UL/LC/UC/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness R (Radii) Finish

UL/LC/UC/5-10 125 250

UL/LC/UC/5-12 125 300

UL/LC/UC/5-16 125 400

UL/LC/UC/5-18 125 450

UL/LC/UC/5-20 125 500

UL/LC/UC/5-24 125 600

UL/LC/UC/5-30 125 750

UL/LC/UC/5-36 125 900

UL/LC/UC/5-40 125 1000

UL/LC/UC/6-8 150 200

UL/LC/UC/6-10 150 250

UL/LC/UC/6-12 150 300

UL/LC/UC/6-16 150 400

UL/LC/UC/6-18 150 450

UL/LC/UC/6-20 150 500

UL/LC/UC/6-24 150 600

UL/LC/UC/6-30 150 750

UL/LC/UC/6-32 150 800

UL/LC/UC/6-36 150 900

UL/LC/UC/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius and Width (W2).

Rung Spacing 300mm

20

0 to

10

00

Steel Cable Ladder

Page 133: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

132

R

90º

15

0

W

H

150

B

Steel Cable Ladder - External RiserType: UL/LC/ER

Components Ref. H W Thickness R (Radii) Finish

UL/LC/ER/2-6 50 150

UL/LC/ER/2-8 50 200

UL/LC/ER/2-10 50 250

UL/LC/ER/2-12 50 300

UL/LC/ER/3-6 75 150

UL/LC/ER/3-8 75 200

UL/LC/ER/3-10 75 250

UL/LC/ER/3-12 75 300

UL/LC/ER/4-6 100 150

UL/LC/ER/4-8 100 200

UL/LC/ER/4-10 100 250

UL/LC/ER/4-12 100 300

UL/LC/ER/4-16 100 400

UL/LC/ER/4-18 100 450

UL/LC/ER/4-20 100 500

UL/LC/ER/4-24 100 600

UL/LC/ER/4-30 100 750

UL/LC/ER/4-36 100 900

UL/LC/ER/4-40 100 1000

UL/LC/ER/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LC/ER/5-10 125 250

UL/LC/ER/5-12 125 300

UL/LC/ER/5-16 125 400

UL/LC/ER/5-18 125 450

UL/LC/ER/5-20 125 500

UL/LC/ER/5-24 125 600

UL/LC/ER/5-30 125 750

UL/LC/ER/5-36 125 900

UL/LC/ER/5-40 125 1000

UL/LC/ER/6-8 150 200

UL/LC/ER/6-10 150 250

UL/LC/ER/6-12 150 300

UL/LC/ER/6-16 150 400

UL/LC/ER/6-18 150 450

UL/LC/ER/6-20 150 500

UL/LC/ER/6-24 150 600

UL/LC/ER/6-30 150 750

UL/LC/ER/6-32 150 800

UL/LC/ER/6-36 150 900

UL/LC/ER/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 134: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

133

R

15

0

150W

H

90º

B

Steel Cable Ladder - Internal RiserType: UL/LC/IR

Components Ref. H W Thickness R (Radii) Finish

UL/LC/IR/2-6 50 150

UL/LC/IR/2-8 50 200

UL/LC/IR/2-10 50 250

UL/LC/IR/2-12 50 300

UL/LC/IR/3-6 75 150

UL/LC/IR/3-8 75 200

UL/LC/IR/3-10 75 250

UL/LC/IR/3-12 75 300

UL/LC/IR/4-6 100 150

UL/LC/IR/4-8 100 200

UL/LC/IR/4-10 100 250

UL/LC/IR/4-12 100 300

UL/LC/IR/4-16 100 400

UL/LC/IR/4-18 100 450

UL/LC/IR/4-20 100 500

UL/LC/IR/4-24 100 600

UL/LC/IR/4-30 100 750

UL/LC/IR/4-36 100 900

UL/LC/IR/4-40 100 1000

UL/LC/IR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LC/IR/5-10 125 250

UL/LC/IR/5-12 125 300

UL/LC/IR/5-16 125 400

UL/LC/IR/5-18 125 450

UL/LC/IR/5-20 125 500

UL/LC/IR/5-24 125 600

UL/LC/IR/5-30 125 750

UL/LC/IR/5-36 125 900

UL/LC/IR/5-40 125 1000

UL/LC/IR/6-8 150 200

UL/LC/IR/6-10 150 250

UL/LC/IR/6-12 150 300

UL/LC/IR/6-16 150 400

UL/LC/IR/6-18 150 450

UL/LC/IR/6-20 150 500

UL/LC/IR/6-24 150 600

UL/LC/IR/6-30 150 750

UL/LC/IR/6-32 150 800

UL/LC/IR/6-36 150 900

UL/LC/IR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 135: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

134

15

0

H

150

R

W

B

90º

Steel Cable Ladder - 900 Vertical TeeType: UL/LC/VT90

Components Ref. H W Thickness R (Radii) Finish

UL/LC/VT90/2-6 50 150

UL/LC/VT90/2-8 50 200

UL/LC/VT90/2-10 50 250

UL/LC/VT90/2-12 50 300

UL/LC/VT90/3-6 75 150

UL/LC/VT90/3-8 75 200

UL/LC/VT90/3-10 75 250

UL/LC/VT90/3-12 75 300

UL/LC/VT90/4-6 100 150

UL/LC/VT90/4-8 100 200

UL/LC/VT90/4-10 100 250

UL/LC/VT90/4-12 100 300

UL/LC/VT90/4-16 100 400

UL/LC/VT90/4-18 100 450

UL/LC/VT90/4-20 100 500

UL/LC/VT90/4-24 100 600

UL/LC/VT90/4-30 100 750

UL/LC/VT90/4-36 100 900

UL/LC/VT90/4-40 100 1000

UL/LC/VT90/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dar d

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Components Ref. H W Thickness R (Radii) Finish

UL/LC/VT90/5-10 125 250

UL/LC/VT90/5-12 125 300

UL/LC/VT90/5-16 125 400

UL/LC/VT90/5-18 125 450

UL/LC/VT90/5-20 125 500

UL/LC/VT90/5-24 125 600

UL/LC/VT90/5-30 125 750

UL/LC/VT90/5-36 125 900

UL/LC/VT90/5-40 125 1000

UL/LC/VT90/6-8 150 200

UL/LC/VT90/6-10 150 250

UL/LC/VT90/6-12 150 300

UL/LC/VT90/6-16 150 400

UL/LC/VT90/6-18 150 450

UL/LC/VT90/6-20 150 500

UL/LC/VT90/6-24 150 600

UL/LC/VT90/6-30 150 750

UL/LC/VT90/6-32 150 800

UL/LC/VT90/6-36 150 900

UL/LC/VT90/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

30

0 to

70

0 (Stan

dard

Radiu

s 45

0)

As Straig

ht C

able Lad

der

Dimension in MillimetreAbbreviation: B - Rung Spacing H - Height R - Radii W - Width

When ordering Material and Finish as straight cable ladder please also indicate Radius.

Rung Spacing 300mm

Steel Cable Ladder

Page 136: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

135

W1

150

H

150

W2

B

Steel Cable Ladder - Left Offset ReducerType: UL/LC/LR

Components Ref. H W1 W2 Thickness Finish

UL/LC/LR/2-6 50 150

UL/LC/LR/2-8 50 200

UL/LC/LR/2-10 50 250

UL/LC/LR/2-12 50 300

UL/LC/LR/3-6 75 150

UL/LC/LR/3-8 75 200

UL/LC/LR/3-10 75 250

UL/LC/LR/3-12 75 300

UL/LC/LR/4-6 100 150

UL/LC/LR/4-8 100 200

UL/LC/LR/4-10 100 250

UL/LC/LR/4-12 100 300

UL/LC/LR/4-16 100 400

UL/LC/LR/4-18 100 450

UL/LC/LR/4-20 100 500

UL/LC/LR/4-24 100 600

UL/LC/LR/4-30 100 750

UL/LC/LR/4-36 100 900

UL/LC/LR/4-40 100 1000

UL/LC/LR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LC/LR/5-10 125 250

UL/LC/LR/5-12 125 300

UL/LC/LR/5-16 125 400

UL/LC/LR/5-18 125 450

UL/LC/LR/5-20 125 500

UL/LC/LR/5-24 125 600

UL/LC/LR/5-30 125 750

UL/LC/LR/5-36 125 900

UL/LC/LR/5-40 125 1000

UL/LC/LR/6-8 150 200

UL/LC/LR/6-10 150 250

UL/LC/LR/6-12 150 300

UL/LC/LR/6-16 150 400

UL/LC/LR/6-18 150 450

UL/LC/LR/6-20 150 500

UL/LC/LR/6-24 150 600

UL/LC/LR/6-30 150 750

UL/LC/LR/6-32 150 800

UL/LC/LR/6-36 150 900

UL/LC/LR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 137: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

136

150

150

H

W2

W1

B

Steel Cable Ladder - Right Offset ReducerType: UL/LC/RR

Components Ref. H W1 W2 Thickness Finish

UL/LC/RR/2-6 50 150

UL/LC/RR/2-8 50 200

UL/LC/RR/2-10 50 250

UL/LC/RR/2-12 50 300

UL/LC/RR/3-6 75 150

UL/LC/RR/3-8 75 200

UL/LC/RR/3-10 75 250

UL/LC/RR/3-12 75 300

UL/LC/RR/4-6 100 150

UL/LC/RR/4-8 100 200

UL/LC/RR/4-10 100 250

UL/LC/RR/4-12 100 300

UL/LC/RR/4-16 100 400

UL/LC/RR/4-18 100 450

UL/LC/RR/4-20 100 500

UL/LC/RR/4-24 100 600

UL/LC/RR/4-30 100 750

UL/LC/RR/4-36 100 900

UL/LC/RR/4-40 100 1000

UL/LC/RR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LC/RR/5-10 125 250

UL/LC/RR/5-12 125 300

UL/LC/RR/5-16 125 400

UL/LC/RR/5-18 125 450

UL/LC/RR/5-20 125 500

UL/LC/RR/5-24 125 600

UL/LC/RR/5-30 125 750

UL/LC/RR/5-36 125 900

UL/LC/RR/5-40 125 1000

UL/LC/RR/6-8 150 200

UL/LC/RR/6-10 150 250

UL/LC/RR/6-12 150 300

UL/LC/RR/6-16 150 400

UL/LC/RR/6-18 150 450

UL/LC/RR/6-20 150 500

UL/LC/RR/6-24 150 600

UL/LC/RR/6-30 150 750

UL/LC/RR/6-32 150 800

UL/LC/RR/6-36 150 900

UL/LC/RR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 138: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

137

150

150

H

W2

W1

B

Steel Cable Ladder - Straight Offset ReducerType: UL/LC/SR

Components Ref. H W1 W2 Thickness Finish

UL/LC/SR/2-6 50 150

UL/LC/SR/2-8 50 200

UL/LC/SR/2-10 50 250

UL/LC/SR/2-12 50 300

UL/LC/SR/3-6 75 150

UL/LC/SR/3-8 75 200

UL/LC/SR/3-10 75 250

UL/LC/SR/3-12 75 300

UL/LC/SR/4-6 100 150

UL/LC/SR/4-8 100 200

UL/LC/SR/4-10 100 250

UL/LC/SR/4-12 100 300

UL/LC/SR/4-16 100 400

UL/LC/SR/4-18 100 450

UL/LC/SR/4-20 100 500

UL/LC/SR/4-24 100 600

UL/LC/SR/4-30 100 750

UL/LC/SR/4-36 100 900

UL/LC/SR/4-40 100 1000

UL/LC/SR/5-8 125 200

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Components Ref. H W1 W2 Thickness Finish

UL/LC/SR/5-10 125 250

UL/LC/SR/5-12 125 300

UL/LC/SR/5-16 125 400

UL/LC/SR/5-18 125 450

UL/LC/SR/5-20 125 500

UL/LC/SR/5-24 125 600

UL/LC/SR/5-30 125 750

UL/LC/SR/5-36 125 900

UL/LC/SR/5-40 125 1000

UL/LC/SR/6-8 150 200

UL/LC/SR/6-10 150 250

UL/LC/SR/6-12 150 300

UL/LC/SR/6-16 150 400

UL/LC/SR/6-18 150 450

UL/LC/SR/6-20 150 500

UL/LC/SR/6-24 150 600

UL/LC/SR/6-30 150 750

UL/LC/SR/6-32 150 800

UL/LC/SR/6-36 150 900

UL/LC/SR/6-40 150 1000

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

As Straig

ht C

able Lad

der

20

0 to

10

00

Dimension in Millimetre Abbreviation: B - Rung Spacing H - Height W - Width

When ordering Material and Finish as straight cable ladder please also indicate Width (W2).

Rung Spacing 300mm

Steel Cable Ladder

Page 139: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

138

Fixture

Pan Head Slotted Screw

M6 x 16 With Hex Nut

and Flat Washer

7

10

H

H1

Cable Ladder

Divider

STRAIGHT DIVIDER SECTION

Cable Ladder

30

ø8 X 18

L

H1

Steel Cable Ladder - Straight DividerType: UL/LC/SD

Components Ref. H H1 Thickness L Finish

UL/LC/SD-2 50 20 1.5

UL/LC/SD-3 75 45 1.5

UL/LC/SD-4 100 70 2.0

UL/LC/SD-4 100 70 2.0

UL/LC/SD-5 125 95 2.0

UL/LC/SD-6 150 120 2.0

Hot Dip Galvanised Epoxy or Polyester

Coated - Stainless

15

00

or 3

00

0

Dimension in Millimetre Abbreviation: H - Height L - Length

When ordering Material and Finish as straight cable ladder please also indicate Length (L).

Steel Cable Ladder

Page 140: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

139

H

M8 x 20 Hex screw

3528

25

4

COVER CLAMP

33

CABLE LADDER AND COVER SECTION APPLICATION

Cover

Cover Clamp

Ladder

COVER

width of 800mm or moreStiffener for cover with

Recess for overlapping

L

H

W

W1

Steel Cable Ladder - Straight CoverType: UL/LC/SC

Components Ref. H W W1 Thickness L Finish

UL/LC/SC-1 16 150 195 1.5

UL/LC/SC-2 16 200 245 1.5

UL/LC/SC-3 16 250 295 1.5

UL/LC/SC-4 16 300 345 1.5

UL/LC/SC-5 16 150 195 1.5

UL/LC/SC-6 16 200 245 1.5

UL/LC/SC-7 16 250 295 1.5

UL/LC/SC-8 16 300 345 1.5

UL/LC/SC-9 16 150 195 2.0

UL/LC/SC-10 16 200 245 2.0

UL/LC/SC-11 16 250 295 2.0

UL/LC/SC-12 16 300 345 2.0

UL/LC/SC-13 16 400 445 2.0

UL/LC/SC-14 16 450 495 2.0

UL/LC/SC-15 16 500 545 2.0

UL/LC/SC-16 16 600 645 2.0

UL/LC/SC-17 16 750 795 2.0

UL/LC/SC-18 16 900 945 2.0

UL/LC/SC-19 16 1000 1045 2.0

UL/LC/SC-20 16 200 245 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Components Ref. H W W1 Thickness L Finish

UL/LC/SC-21 16 250 295 2.0

UL/LC/SC-22 16 300 345 2.0

UL/LC/SC-23 16 400 445 2.0

UL/LC/SC-24 16 450 495 2.0

UL/LC/SC-25 16 500 545 2.0

UL/LC/SC-26 16 600 645 2.0

UL/LC/SC-27 16 750 795 2.0

UL/LC/SC-28 16 900 945 2.0

UL/LC/SC-29 16 1000 1045 2.0

UL/LC/SC-30 16 200 245 2.0

UL/LC/SC-31 16 250 295 2.0

UL/LC/SC-32 16 300 345 2.0

UL/LC/SC-33 16 400 445 2.0

UL/LC/SC-34 16 450 495 2.0

UL/LC/SC-35 16 500 545 2.0

UL/LC/SC-36 16 600 645 2.0

UL/LC/SC-37 16 750 795 2.0

UL/LC/SC-38 16 800 845 2.0

UL/LC/SC-39 16 900 945 2.0

UL/LC/SC-40 16 1000 1045 2.0

Ho

t Dip

Galvan

ised - Ep

oxy o

r Polyester C

oated

- Stainless

15

00

or 3

00

0

Dimension in Millimetre Abbreviation: H - Height L - Length W - Width

When ordering Material and Finish as straight cable ladder please also indicateLength (L).

Steel Cable Ladder

Components Ref. Description

UL/LZ/CMP Cable Ladder Cover Clamp

Page 141: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

140

Steel Cable Ladder - Horizontal Splice PlateType: UL/LC/HS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. H Description Finish

UL/LC/HS-6-4 100

UL/LC/HS-6-5 125

UL/LC/HS-6-6 150

Splice Plate and Fixture

Horizontal Splice Plate with Fixture For

100mm - 125mm - 150mm Height Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Steel Cable Ladder

and Flat Washer

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

23

45180

44

45

23

H

9mm Sq

14

Total 6 Sets Per Connection

Application

Page 142: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

141

Steel Cable Ladder - Horizontal Splice PlateType: UL/LC/HS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height Description Finish

UL/LC/HS-4-2 50

UL/LC/HS-4-3 75To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

9mm Sq

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

and Flat Washer

14

44

18045

23

45

23

H

Total 4 Sets Per Connection

Application

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 143: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

142

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LC/VAS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/VAS-6-4 100

UL/LC/VAS-6-5 125

UL/LC/VAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Cup Head Sq Neck Screw

and Flat Washer

M8 x 20 With Hex NutTotal 1 Set Per Connection

Hex Screw

and Flat Washer

M8 x 20 With Hex Nut

Total 6 Sets Per Connection

9 Sq

ø12

90

H

100

45

22

180

Application

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 144: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

143

Steel Cable Ladder - Vertical Adjustable Splice PlateType: UL/LC/VAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/VAS-4-2 50

UL/LC/VAS-4-3 75To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hex Screw

M10 x 20 With Hex Nut

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

9 Sq

90

100

ø12

14

H

2245

180

and Flat Washer

Total 1 Set Per Connection

and Flat Washer

Total 4 Sets Per Connection

Application

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 145: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

144

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LC/HAS-6

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/HAS-6-4 100

UL/LC/HAS-6-5 125

UL/LC/HAS-6-6 150

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

H

12

90º

250

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

and Flat Washer

Total 6 Sets Per Connection

ø13 x 3592

45

45

Application

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 146: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

145

Steel Cable Ladder - Horizontal Adjustable Splice PlateType: UL/LC/HAS-4

Dimension in Millimetre Abbreviation: H - Height

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/HAS-4-2 50

UL/LC/HAS-4-3 75To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Cup Head Sq Neck Screw

M8 x 20 With Hex Nut

250

90º H

12

and Flat Washer

Total 4 Sets Per Connection

92

45

45

ø13 x 35

Application

Splice Plate and Fixture

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 147: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

146

Steel Cable Ladder - End PlateType: UL/LC/EP-6

Dimension in Millimetre Abbreviation: H - Height W - Width

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/EP-6-4 100

UL/LC/EP-6-5 125

UL/LC/EP-6-6 150

End Plate with Fixture

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

89

W

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

H

and Flat Washer

Total 4 Sets Per End Plate

Application

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 148: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

147

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

89

W

and Flat Washer

Total 4 Sets Per End Plate

H

M8 x 20 With Hex Nut

Cup Head Sq Neck Screw

89

W

and Flat Washer

Total 4 Sets Per End Plate

H

Steel Cable Ladder - End PlateType: UL/LC/EP-4

Dimension in Millimetre Abbreviation: H - Height W - Width

Material and Finish as straight cable ladder.

Components Ref. Cable Ladder Height H Finish

UL/LC/EP-4-2 50

UL/LC/EP-4-3 75

End Plate with Fixture

Application

To Fit Cable Ladder with

2mm Clearance

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 149: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of

148

HOLD DOWN CLAMP WITH FIXTURE

CABLE LADDER

ULISTRUT

SUPPORT

42

45

M8 Spring Nut

With M8 x 20 Hex Screw

Hold Down Clamp

and Flat Washer

Steel Cable Ladder - Hold Down ClampType: UL/L-CP

Dimension in Millimetre

When ordering please indicate Materail and Finish.

Components Ref. Description Thickness Finish

UL/L-CP Hold Down Clamp 4mm

Clamp and Fixture

Application

Steel Cable Ladder

Hot Dip GalvanisedEpoxy or Polyester Coated

Stainless

Page 150: Table of Contents - Nanyang Electric...BS4678, SS249:1998 and NEMA-VE1. Projects Over the years, products manufactured by United U-LI have been widely used in the various sectors of