1

TABLE OF CONTENTS

2 Welcome Letter from Steffen Oellers, EPDA President

3 Sponsors and New EPDA Members

4 Apologies

5 EPDA Leadership

6 Delegate List

9 Schedule of Events

11 Meeting Rooms Floor Plan

12 Annual General Meeting Agenda

13 EPDA Committee Agendas

18 2011 Annual General Meeting Minutes

22 Strategic Plan — Originally presented in May 2010

36 2012 Keynote Speakers

38 Market Segment Meetings

39 Panel Sessions

40 Balance Sheet and Detailed Income Statement

44 EPDA Manual on Compliance with EU Competition Law

46 EPDA Bylaws

51 EPDA Directory

68 EPDA Staff

2

WelcomeDear EPDA Member,

On behalf of EPDA’s Board of Directors it gives me great pleasure to welcome you all to the 2012 Annual Conference in the heart of Budapest, where I hope you will have a very informative, expansive and enjoyable few days. The EPDA Board, committees and staff have organised a comprehensive itinerary of speakers and panels, possibilities to exchange information and ideas as well as an opportunity to appreciate this glorious city.

We have some very special keynote speakers with us this year. Dr. Gábor Kelemen, Hungarian Minister for National Economy and Daniel Stricker, Head of Market Research at KI Group. After the success of EPDA’s first market segment meetings at last year’s conference in Prague, I am pleased to announce we will continue with segment meetings, Signs & Display, Building & Construction and Industry. The meetings will be presented by Mike Horsten, Mimaki Euoppe B.V., and Patrick Van Soelen, Mimaki Europe; Miklós Fórizs, Kerrtrade Ltd.; and Walter Weterman, ProMaqua GmbH.

Also returning this year is a distributor panel, hosted by Nick Kraguljac of Zell-Metall GmbH, and new for 2012 a manufacturer panel hosted by Maurizio Adreani, Jr, of Adreani Spa. Nick and Maurizio are long-term members of the association, always standing for their view and certainly will facilitate dynamic and productive discussions.

Other highlights of the conference will be our annual tabletop showcases, the annual gala dinner and the auction.

The EPDA Board would like to thank you for taking time to attend this year’s conference. Your commitment confirms that this event is a meaningful forum for our European distribution and manufacturing members. Exchanging ideas and visions as well as joint education are the key cornerstones the Board has committed itself to provide to its members.

Have a wonderful conference and enjoy plenty of opportunity to meet or get reacquainted with industry colleagues to strengthen the networks vital for success in our industry.

We wish you a pleasant event.

Sincerely,

Steffen Oellers, EPDA PresidentKlöckner Pentaplast GmbH & Co. KG

3

THANK YOU FOR YOUR SUPPORT

SPONSORS

Welcome Reception

Vink Holdings Ltd.

Gala Dinner

KYDEX LLCSIMONA AG

Tabletop Exhibitors

Wefapress® Beck & Co. GmbHCartierWilson LLC/Boltaron

Brett Martin Ltd.Zell-Metall GmbH

Conference Notebook

CartierWilson LLC/Boltaron

WELCOME NEW EPDA MEMBERSThe following companies have joined EPDA since the 2011 Annual Conference:

Tuplex Sp. z.o.o.Righton Ltd.

4

APOLOGIESThe following companies have sent their apologies for not being able to join us in Budapest for the conference.

GAMMACRIL s.r.l.

GEVACRIL

5

2011-2012 EPDA LEADERSHIPEPDA BOARD OF DIRECTORS

PresidentSteffen Oellers, Klöckner Pentaplast GmbH Co. KG

Chair of Plastic Stock Shapes Committee

Vice PresidentDavid Ladyman, Vink Holdings Ltd.

Immediate Past PresidentBryan Heath, Robert Horne Sign & Display

Chair of the Environmental Committee

Board MembersTan Ali, Nylacast Ltd.

Co-chair of Membership Committee

Gunnar Råvik, Carlsson & Möller ABCo-chair of Membership Committee

Sumayyah Mahomed, Nylacast Ltd.Chair of Communications Committee

Please contact EPDA at epda@epda.com if you might be interested in serving on a committee to help further the association’s goals. A list of committee descriptions is available online at www.epda.com/board.

All members are welcome to attend committee meetings.

6

DELEGATE REGISTRATION LISTDelegates registered as of 30 April 2012

Name Company Name City/State/Country

Distributors

Maurizio Adreani, Jr. Adreani Spa Milan, Italy*Elena Merino AgruQuero Thermoplastics, S.L. Pinto, Madrid, SpainJuan Quero, Jr. AgruQuero Thermoplastics, S.L. Pinto, Madrid, SpainLari Hahtonen Aikolon Oy Oulu, FinlandMartti Hahtonen Aikolon Oy Oulu, FinlandChristina Granacher Angst + Pfister Group Zürich, Switzerland Nils Krüger Arthur Krüger GmbH Technik in Kunststoff Hamburg, GermanyMichael Andersson Carlsson & Möller AB Helsingborg, SwedenGunnar Råvik Carlsson & Möller AB Helsingborg, Sweden*Monica Råvik Carlsson & Möller AB Helsingborg, Sweden Frank Weygaerts Eriks Group Hoboken, Antwerp, BelgiumMarko Koljonen Fluorotech Oy Ltd. Vantaa, FinlandJari Monola Fluorotech Oy Ltd. Vantaa, FinlandPeter Paul Jongmans Industrial Plastics Europe B.V. Nieuwegein, Netherlands Roeland Lambers Industrial Plastics Europe B.V. Nieuwegein, Netherlands Rolf Köller Lentia GmbH Stockstadt/Main, GermanyOle Klaumann Linatex A/S Herlev, Denmark *Tine Demandt Linatex A/S Herlev, Denmark *German Barrena Lork Industrias, S.L. Barcelona, Spain *Sonia Jansa Lork Industrias, S.L. Barcelona, SpainMonica Jimenez Lork Industrias, S.L. Barcelona, SpainOscar Jimenez Lork Industrias, S.L. Barcelona, SpainJaco Frankfort Merrem Materials B.V., NL Zaltbommel, Netherlands Peter Puch Nordic Plastics Group Trelleborg, SwedenCecilia Sonesson Nordic Plastics Group Gothenburg, SwedenFred Arnulf Busen Polytron Kunststofftechnik GmbH & Co. KG Bergisch-Gladbach, GermanyConstantin Padureanu ProSEP Craiova Dolj, RomaniaSied Kooistra Pyrasied Xtreme Acrylic B.V. Leeuwarden, NetherlandsCalvin Hussey Righton Ltd. Birmingham, England, UK *Kirsty Hussey Righton Ltd. Birmingham, England, UK Adrian Dennis Robert Horne Sign & Display Northampton, England, UKBryan Heath Robert Horne Sign & Display Northampton, England, UK*Marie Heath Robert Horne Sign & Display Northampton, England, UKSteve Jones Robert Horne Sign & Display Northampton, England, UKAlar Künnapuu Tööstusplast Ltd. Tartu Vald, Estonia*Signe Tarve Tööstusplast Ltd. Tartu Vald, Estonia János Bendl Umundum Kft. Budaörs, HungaryMark Mailinger Umundum Kft. Budaörs Hungary*Angela Ladyman Vink Holdings Ltd. Weybridge, Surrey, England, UKDavid Ladyman Vink Holdings Ltd. Weybridge, Surrey, England, UKDavid Williams Vink Holdings Ltd. Weybridge, Surrey, England, UKRicardo Gama Vitroflex Advanced Plastics Riudellots de la Selva, Spain

Total Distributor Companies: 23 • Delegates: 33 • Spouses and Guests: 9

* denotes spouse or companion • denotes nonmember attendee

7

Manufacturers• Andreas Reinhold Astari Europe GmbH Grosswallstadt, GermanyDuncan Smith Brett Martin Ltd. Lancashire, England, UK *Shelley Smith Brett Martin Ltd. Lancashire, England, UK Karl H. Bielefeld Centroplast Engineering Plastics GmbH Marsberg, Germany*Marlene Baras Ensinger GmbH Nufringen, GermanyMartin Baras Ensinger GmbH Nufringen, GermanyPaolo Greco Fluorseals S.P.A. Bergamo, ItalyTom Nulty Foamalite Limited Co. Cavan, IrelandTeri Shanahan Foamalite Limited Co. Cavan, IrelandThorsten Fuessinger GEHR GmbH Mannheim, GermanyDirk Nüssgen GEHR GmbH Mannheim, GermanyLennaert DeBokx Global EPP Ltd. Leicester, England, UKSimon Gilbert Global EPP Ltd. Leicester, England, UKMichael Sowinski Global EPP Ltd. Leicester, England, UKGian Foresti Guarniflon SpA Castelli Calepio (BG), ItalySteffen Oellers Klöckner Pentaplast GmbH & Co. KG Heiligenroth, GermanyMarc Licharz Licharz GmbH Bucholz, GermanyAndreas Weidenfeld Licharz GmbH Bucholz, GermanyBryan Welch Lucite International UK Ltd. Lancashire, England, UKTan Ali Nylacast Limited Leicester, England, UKSumayyah Mahomed Nylacast Limited Leicester, England. UKDavid Pampanel Plazit 2001 D.N. Yizreel, Israel*Marta Pampanel Plazit 2001 D.N. Yizreel, IsraelLuca Carabelli Quadrant EPP — AG Lenzburg, Switzerland*Maria Bernard Quinn Plastics GmbH Mainz, GermanyWilfried Bernard Quinn Plastics GmbH Mainz, GermanyPeter Kelly Quinn Plastics Services Ltd. County Fermanagh, N. Ireland, UKCharles Shaw Quinn Plastics Services Ltd. County Fermanagh, N. Ireland, UKJaroslav Bilek Röchling Engineering Plastics KG Haren, GermanyFriedbert Bollinger Röchling Sustaplast KG Lahnstein, Germany*Marketa Cizkova Röchling Sustaplast KG Lahnstein, GermanyMarkus Gotz SIMONA AG Kirn, GermanyGiovanni Vesco SIMONA AG Kirn, GermanyJens Lösing Wefapress® Beck & Co. GmbH Vreden, GermanyDaniel Steggemann Wefapress® Beck & Co. GmbH Vreden, Germany*Liliana Klepsch Zell-Metall GmbH Kaprun, AustriaRudolph Klepsch Zell-Metall GmbH Kaprun, AustriaNick Kraguljac Zell-Metall GmbH Kaprun, AustriaHans Winterleitner Zell-Metall GmbH Kaprun, Austria

Total Manufacturer Companies: 19 • Delegates: 32 • Spouses and Guests: 6

* denotes spouse or companion • denotes nonmember attendee

Name Company Name City/State/Country

8

IAPD DistributorsHoward Natal Atlas Fibre Company Northbrook, IL USAJane Saale Cope Plastics, Inc. Godfrey, IL USA *Steve Saale Cope Plastics, Inc. Godfrey, IL USARobert Bacon Harrington Industrial Plastics LLC Chino, CA USA *Julie Kramer Laird Plastics Boca Raton, FL USAMark Kramer Laird Plastics Boca Raton, FL USA Kevin Short Laird Plastics Flower Mound, TX USATotal IAPD Distributor Companies: 4 • Delegates: 5 • Spouses and Guests: 2

IAPD ManufacturersAdam Mellen CartierWilson LLC/Boltaron Newcomerstown, OH USAJohn Inman Boltaron Performance Products Wallington, Baldock, Hertfordshire, UK Ronn Cort KYDEX, LLC Belvidere, NJ USA*Sandy Cort KYDEX, LLC Belvidere, NJ USAAndy Hinsley KYDEX, LLC South Yorks, England, UK Rohit Saigal Polymer Industries Henagar, AL USAJose Cuervo Saint-Gobain Performance Plastics Neuss, Germany Total IAPD Manufacturer Companies: 4 • Delegates: 6 • Spouses and Guests: 1

EPDA Staff/Speakers/Guests

Miklós Fórizs Speaker Kerttrade Ltd. Dunavarsány-Erospuszta, HungaryPatrick Van Soelen Speaker Mimaki Europpe B.V. Diemen NH, Netherlands

Dr. Gábor Kelemen Speaker Ministry for National Economy Budapest, HungaryDaniel Stricker Speaker PieWeb Bad Homburg, GermanyWalter Wetermen Speaker ProMaqua GmbH Heidelberg, GermanyJackie Laurent EPDA Milton Keynes, UK*Michael Avery EPDA Overland Park, KS USASusan Avery, CAE EPDA Overland Park, KS USACrystal Roberts EPDA Overland Park, KS USA *Brent O’Halloran EPDA Overland Park, KS USA

* denotes spouse or companion • denotes nonmember attendee

Name Company Name City/State/Country

9

SCHEDULE OF EVENTS

Thursday, 10 May08:00 – 12:00 Board Meeting Regiomontanus Salon10:00 – 14:00 Registration Desk Open Regina Foyer12:00 – 13:00 Networking Lunch Restaurant Giardino14:00 – 15:00 AGM Regina II-III - EPDA President’s address - IAPD President’s address - Elections (dues subscriptions, Board members, 2013 site selection)15:00 – 15:30 Coffee Break Regina Foyer15:30 – 16:15 Keynote Speaker Dr. Gábor Kelemen, Regina II-III18:30 – 19:30 Welcome Reception Regina Foyer

Friday, 11 May07:30 – 08:30 Registration Desk Open Regina Foyer09:00 – 10:00 Keynote Speaker Daniel Stricker, Regina II-III09:30 – 15:00 Partner Programme – Hungarian Culinary Experience Meet in hotel lobby at 9:1510:00 – 10:30 Table Tops with Coffee Break Regina Foyer10:30 – 11:15 Market Segment Meeting Regina II-III - Signs & Display - Presenters: Mike Horsten, Mimaki Europe B.V., Patrick Van Soelen, Mimaki Europe11:15 – 11:45 Table Tops with Coffee Break Regina Foyer11:45 – 12:30 Market Segment Meeting Regina II-III - Industry - Presenter: Walter Weterman, ProMaqua GmbH12:30 – 13:30 Networking Lunch Restaurant Giardino13:30 – 14:15 Market Segment Meeting - Building & Construction Regina II-III - Presenter: Miklós Fórizs, Kerrtrade Ltd.14:15 – 14:45 Table Top with Coffee Break Regina Foyer14:45 – 16:00 Committee Meetings - Pipe, Valves and Fittings Bandini Salon - Plastic Stock Shapes Regina II-III16:15 – 17:15 Committee Meetings - Environmental Regina II-III - Communications Bandini Salon - Membership Marzio Salon19:00 – 22:30 Gala Dinner Gundel Restaurant Meet in hotel lobby at 18:45 - Charity Auction

10

Saturday, 12 May09:30 – 10:45 Distributor Panel Session Regina II-III Facilitated by Nick Kraguljac, Zell-Metall GmbH Panelists: János Bendl, Umundum Kft.; Cecilia Sonesson, Nordic Plastics Group; Calvin Hussey, Righton Ltd.

10:45 – 11:15 Coffee Break Regina Foyer11:15 – 12:00 Manufacturer Panel Session Regina II-III Facilitated by Maurizio Adreani, Jr., Adreani Spa Panelists: Luca Carabelli, Quadrant EPP; Giovanni Vesco, SIMONA AG; Bryan Welch, Lucite International

12:00 – 12:15 Closing Remarks Regina II-III12:15 – 13:15 Networking Lunch Restaurant Giardino14:00 – 17:00 Optional City Tour

Meet in hotel lobby at 13:4520:00 – 23:00 Optional Dinner Múzeum Café and Restaurant Meet in hotel lobby at 19:45

Sunday, 13 May07:00 – 10:00 Farewell Breakfast Restaurant Giardino

11

MEETING ROOMS FLOOR PLAN

12

ANNUAL GENERAL MEETING AGENDA10 MAY 2012, BUDAPEST, HUNGARY

1. WelcomePresident Steffen Oellers, Klöckner Pentaplast GmbH Co. KG

2. EPDA President’s Address

3. IAPD President’s AddressBob Bacon, Harrington Industrial Plastics LLC

4. Association Business a. Approval of minutes b. Finance c. Elections d. Dues subscription rate e. 2013 conference site selection

5. Keynote Speaker - Dr. Gábor Keleman

13

PLASTIC PIPE, VALVES AND FITTINGS MEETING AGENDA11 MAY 2012, Budapest, Hungary

1. Welcome

2. Case study template

3. Quarterly webinars on “Benefits of Plastics Piping”

4. Committee name change on website, EPDA documents, etc.

5. Committee member recruitment

14

MEMBERSHIP COMMITTEE MEETING AGENDA11 MAY 2012, Budapest, Hugary

1. Welcome

2. Country Ambassadors

3. Selection of countries for representation

4. Marketing information / literature available

5. Post meeting to be held in autumn to follow up — time and location

15

COMMUNICATIONS COMMITTEE MEETING AGENDA11 MAY 2012, Budapest, Hungary

1. Welcome

2. Marketing communications update

3. Social media strategy

4. Continuing epda.com development ideas

5. New business

16

STOCK SHAPES COMMITTEE MEETING AGENDA11 MAY 2012, Budapest, Hungary

1. Welcome

2. Pricing index discussion

3. Supply chain collaboration road map

4. Raw material pricing research

5. Decision making/value add for supply chain

17

ENVIRONMENTAL COMMITTEE MEETING AGENDA11 MAY 2012, Budapest, Hungary

1. Welcome

2. Environmental survey analysis

3. Future EPDA environmental activities

18

2011 ANNUAL GENERAL MEETING MINUTESMinutes of the Annual General Meeting of the European Plastics Distributors Association, held on 3 June 2011, at the Hilton Prague Old Town Hotel, Prague, Czech Republic.

Distributors presentJuan Quero AgruQuero Thermoplastics, S.L. Pinto, Madrid, SpainLari Hahtonen Aikolon Oy Oulu, FinlandMartti Hahtonen Aikolon Oy Oulu, FinlandNils Krüger Arthur Krüger Technik in Hamburg, Germany KunststoffHoward Natal# Atlas Fibre Company Skokie, IL USAGunnar Råvik Carlsson & Möller AB Helsingborg, SwedenGeert Denutte CGK-GROUP BVBA Gullegem, BelgiumKarl Boss Faigle Industrieplast GmbH Hard, AustriaOliver Schmid Faigle Industrieplast GmbH Hard, AustriaTapani Aura Fluorotech Oy Ltd. Vantaa, FinlandJari Monola Fluorotech Oy Ltd. Vantaa, FinlandAdrienn Ferreira* Goncalves Ferreira, LDA Lisbon, PortugalAntonio Ferreira Goncalves Ferreira, LDA Lisbon, PortugalSylvie Dubord* Groupe Polyalto Inc. Montreal, Quebec, CanadaMarc Lewis# Groupe Polyalto Inc. Montreal, Quebec, CanadaPeter Paul Jongmans Industrial Plastics Europe B.V. Nieuwegein, NetherlandsRoeland Lambers Industrial Plastics Europe BV Nieuwegein, NetherlandsMark Kramer# Laird Plastics Boca Raton, FL USAJulie Kramer* Laird Plastics Boca Raton, FL USAKevin Short# Laird Plastics Flower Mound, TX USARolf Köller Lentia GmbH Stockstadt/Main, GermanyOle Klaumann Linatex A/S Herlev, DenmarkTine Demandt* Linatex A/S Herlev, DenmarkMonica Jimenez Lork Industrias, S.L. Barcelona, SpainOscar Jimenez Lork Industrias, S.L. Barcelona, SpainJaco Frankfort Merrem Materials B.V., NL Zaltbommel, NetherlandsGabriela Palmeira* Norplex LDA Pedroso, Portugal Anselmo Rebelo Norplex LDA Pedroso, PortugalCintia Rebelo Norplex LDA Pedroso, PortugalErica Rebelo* Norplex LDA Pedroso, PortugalFred Arnulf Busen Polytron Kunststofftechnik Bergisch-Gladbach, Germany GmbH & Co. KGRicardo Gama PT Polimer Tecnic SL Riudellots de la Selva, Spain Sied Kooistra Pyrasied Xtreme Acrylic B.V. Leeuwarden, NetherlandsGonneke Van Hoesen* Pyrasied Xtreme Acrylic B.V. Leeuwarden, NetherlandsAdrian Dennis Robert Horne Group Ltd. Northampton, England, UKBryan Heath Robert Horne Sign & Display Northampton, England, UKMarie Heath* Robert Horne Sign & Display Northampton, England, UKAlar Künnapuu Tööstusplast Ltd. Tartu Vald, Tartumaa, EstoniaKrzysztof Kryszewski TUPLEX Sp. z o.o. Warszawa, PolandRenata Tulwin TUPLEX Sp. z o.o. Warszawa, Poland Ralf

#denotes IAPD member * denotes spouse or companion • denotes nonmember attendee

19

János Bendl Umundum Kft. Budaörs, HungaryAngela Ladyman* Vink Holdings Ltd. Weybridge, Surrey, England, UKDavid Ladyman Vink Holdings Ltd. Weybridge, Surrey, England, UKDavid Williams Vink Holdings Ltd. Weybridge, Surrey, England, UKRalf Höellmann Vink Kunststoffe GmbH Emmerich, GermanyTotal Distributor Companies: 27 • Delegates: 36 • Spouses and Guests: 9

Manufacturers present Duncan Smith Brett Martin Ltd. Lancashire, England, UKShelley Smith* Brett Martin Ltd. Lancashire, England, UKElisabetta Del Priore Munzi Clax Italia Pomezia, Rome, ItalyMartin Baras ENSINGER GmbH Nufringen, GermanyMarlene Baras* ENSINGER GmbH Nufringen, GermanyBjörn Ühlken ENSINGER GmbH Nufringen, GermanyFabrizio Guerra Gammacril s.r.l. Nerviano, ItalyMario Rotelli Gammacril s.r.l. Nerviano, ItalyThorston Fueessinger GEHR GmbH Mannheim, GermanyDirk Nüssgen GEHR GmbH Mannheim, GermanyChristine Granacher Georg Fischer RLS AG Schaff hausen, SwitzerlandLennaert DeBokx Global EPP Ltd. Leicester, England, UKJochen Staudt Global EPP Ltd. Leicester, England, UKPat Foose# Harvel Plastics, Inc. Easton, PA, USAMiroslav Maslik Klöckner Pentaplast Heiligenroth, Germany GmbH & Co. KG Steffen Oellers Klöckner Pentaplast Heiligenroth, Germany GmbH & Co. KGRonn Cort# KYDEX, LLC Bloomsburg, PA USASandy Cort* KYDEX, LLC Bloomsburg, PA USAGary Borgia# Laminations, Inc. Archibald, PA USAJohn Breslin# Laminations, Inc. Archibald, PA USATanver Ali Nylacast Ltd. Leicester, England, UKSumayyah Mahomed Nylacast Ltd. Leicester, England, UKMarco Schwietering ORBILAN GmbH Kunststoffwerk Rosendahl-Osterwick, Germany Aldo Spadon ORBILAN GmbH Kunststoffwerk Rosendahl-Osterwick, GermanyDavid Pampanel Plazit 2001 D.N. Yizreel, IsraelMarta Pampanel* Plazit 2001 D.N. Yizreel, IsraelRohit Saigal# Polymer Industries Henagar, AL USALuca Carabelli Quadrant EPP – AG Lenzburg, SwitzerlandMaria Bernard* Quinn Plastics Services Ltd. County Fermanagh, N. Ireland, UK Wilfried Bernard Quinn Plastics Services Ltd. County Fermanagh, N. Ireland, UK Peter Kelly Quinn Plastics Services Ltd. County Fermanagh, N. Ireland, UKUdo Engels Röchling Engineering Plastics KG Haren, GermanyPaola Del Prete Röchling Engineering Plastics Venegono Inferiore (Varese), Italy Italia s.r.l.Fausto Lo Conte Röchling Engineering Plastics Venegono Inferiore (Varese), Italy Italia s.r.l.Jaroslav Bilek Röchling Sustaplast KG Lahnstein, Germany Marketa Cizkova* Röchling Sustaplast KG Lahnstein, GermanyGiovanni Vesco Simona AG Kirn, GermanyCorinne Becker* Simona AG Kim, GermanyDetlef Becker Simona AG Kim, GermanyCharlotte Beck* Wefapress Beck & Co. GmbH Vreden, GermanyGerrit Beck Wefapress Beck & Co. GmbH Vreden, Germany#denotes IAPD member * denotes spouse or companion • denotes nonmember attendee

20

Jens Loesing Wefapress Beck & Co. GmbH Vreden, GermanyRudolf Klepsch Zell-Metall GmbH Engineering Kaprun, Austria Plastics Nick Kraguljac Zell-Metall GmbH Engineering Kaprun, Austria Plastics Andrea Schwaighofer Zell-Metall GmbH Engineering Kaprun, Austria Plastics Hans Winterleitner Zell-Metall GmbH Engineering Kaprun, Austria Plastics Patrick Pheffer# ZL engineering plastics inc. Lenexa, KS USALita Pheffer* ZL engineering plastics inc. Lenexa, KS USA

Total Manufacturer Companies: 24 • Delegates: 37 • Spouses and Guests: 11

EPDA Staff/Speakers/Partners/Guests

Susan Avery EPDA Overland Park, KS USACrystal Roberts EPDA Overland Park, KS USASabine Reinhold EPDA Laufach, GermanyThomas Reinhold* EPDA Laufach, GermanyStephen Kaduk Speaker Taufkirchen, München, GermanyPeter Sinclair Speaker Birmingham, England, UKJoachim Eckstein PolyComply Hoechst GmbH Frankfurt, GermanySarah Cassie Voice Brand Design Leicestershire, England, UKTim Harrison Voice Brand Design Leicestershire, England, UK

Chairman’s WelcomeThe meeting opened at 14:00 on 2 June 2011. President Steff en Oellers called the Annual General Meeting to order and declared the meeting as a quorum. He welcomed all attendees. A thank you was off ered to all sponsors of the conference and to the table top exhibitors. All delegates were invited to visit the table tops during the coff ee breaks on Friday, 3 June 2011.

The president explained the membership dues rate had stayed at 1.230,00 Euro since 2009. He informed the mem-bership that no Board member receives any reimbursement of costs for travel or hotel accommodation during board meetings and annual conferences. The 2011 conference registration fee allowed for valuable speakers and the addi-tion of the distributor panel and market segment meetings.

Steff en Oellers welcomed the IAPD President, Howard Natal, who addressed the membership.

The president welcomed and introduced all new members who joined the association since the Annual General Meeting in 2010. Approval of MinutesSteff en Oellers informed the group that the 28 May 2010 minutes of the Annual General Meeting held in Bruges, Belgium, are included in the conference notebooks. There were no questions. The minutes were approved as presented.

Approval of FinanceThe President informed the membership that the fi nancial report including the association’s accounts as of 31 December 2010 are included in the conference notebooks. There were no questions. The fi nancial reports were ap-proved as presented.

Association BusinessThe EPDA Membership annual subscription rate of 1.267,00 Euro for 2012 was approved by written ballot.

Election of Board MembersFor the 2011-2012 leadership terms, the re-election of Gunnar Råvik, Carlsson & Möller AB was approved by written ballot.

21

President Steff en Oellers asked the 2010–2011 Board of Directors to stand and be recognised for their work during the last year.

He asked that more distributors become involved in the association’s committees and Board.

Accomplishments

Website and New Brand

The President introduced the new association brand, website and logo to the membership. The new website changes will be launched in several phases, the fi rst being the new look. Other updates will be a membership directory search and a members’ only area which will include technical documents, committee projects and IAPD educational materi-als. The EPDA newsletter will also be updated with a new logo and look.

Translation of Introduction to Plastics

Steff en Oellers informed the membership that the Introduction to Plastics has been translated into German, Italian and French. These will be available in mid-July and can be ordered with the applicable order form. The English ver-sion and the French-Canadian version can be ordered through IAPD.

Conference Programme

The President introduced the group to new conference programme items including the Distributor Panel and the three Market Segment Meetings with the subjects: Signs & Graphics, Building & Construction and Industry.

Further Business

He informed the members about the goal to expedite the relationship with other organisations like PIE, Vinyl2010 and IAPD and to search for additional organisations with the similar interests in plastics and distribution.

Hearing no further business, the Annual General Meeting was adjourned at 14:30.

Respectfully submitted by,

Susan E. Avery, CAE, Executive Secretary

22

Strategic Plan

Presented to EPDA membership in May 2010

23

24

25

26

27

[Postponed to 2013]

[Postponed to 2013]

[Postponed to May 2012]

28

29

[Postponed to 2013]

30

[Nonvember 2012][Nonvember 2012]

[May 2013]

31

[Completed April 2012]

[Completed February 2011]

[December 2012]

32

33

34

35

36

Dr. Gábor Kelemen will deliver a presentation on the current status of the European economy and how it may affect the platics industry. Dr. Kelemen works for the Ministry of Economy, Department for Industry Strategy. He started with the ministry as a defence advisor to economy fields and served as a national representative for related NATO and EU bodies. Most recently he has worked with the Industrial Strategies Department to foster strategic thinking in various sectors of Hungarian industries.

Dr. Kelemen is involved directly in lawmaking regarding industrial sectors and strategic thinking.

He also works to project industrial strategies in cooperation with industry stakeholders by coordinating industry self regulatory efforts with Governmental goals.

He is responsible for sector working groups for the automotive industry, logistics, electronics and the defense industry

Previously he served as a national representative in various EU and NATO working groups and committees, involved in Critical Infrastructure Protection projects and drafting its regulatory background.

KEYNOTE SPEAKER: THE EUROPEAN ECONOMYThursday, 10 May 2012

Dr. Gábor Kelemen, Hungarian Ministry for National Economy

37

There is no question about it: We are living in the plastics age. In the year 2011 alone, 233mt of plastics was produced. Although in terms of weight that is less than the total global iron output of that year, in volume-terms synthetic polymers already surpassed steel at the end of the 1980s.

About 93 percent of plastics are considered to be standard types, with polyethylene and polypropylene — polyolefins that are based on “olefins” (ethylene, propylene) — the most important, accounting for two-thirds of standard plastics. Other important standard plastics include PVC, polystyrene and PET.

The remaining 7 percent are made up of engineering thermoplastics, characterized among others by their higher temperature resistance. Key types include polycarbonate, polyamide, PMMA (“Plexi”), PBT and polyacetals, as well as numerous special compounds and blends.

Thermoplastics are normally linked to the feedstock oil. However, this link is in fact a half-truth, since about 40 percent of the world’s thermoplastics are sourced from gas. Another 10 percent are based on coal. In the course of the past 10 years the feedstock balance has shifted significantly, mostly as a result of the massive capacity expansions in the Middle East, most of which are based on ethane — the “waste gas” generated by the region’s oil fields.

The “shale gas revolution” in the United States marks yet another chapter in the ongoing tale of the changing global feedstock balance. As the raw material base continues to shift, the next decade is set to see a plethora of changes, both in terms of the technology of integrated production sites and as a result of the shifts in the existing market balance. One key change is the increasing decoupling in the production of key synthetic elastomer feedstocks ethylene, propylene and butylene. That shift will significantly impact the thermoplastics economy.

In addition, the coming decade will see a significant change in the economic balance of power as the emerging markets continue to gain in importance. A key player in this respect is the new global superpower China — not just because of its immense demand for feedstocks, but also as a result of the mega-production plans already on stream and those planned for the near to medium-term future. Already now, engineering thermoplastics production is dominated by the Chinese and Asian markets — a trend that is set to further reinforce itself in the coming years.

The presentation will highlight key thermoplastic market developments and illustrate the resulting outcomes for different world regions, with a special focus on Europe.

KEYNOTE SPEAKER: DEVELOPMENTS IN EUROPEAN PLASTICS MARKETS

Friday, 11 May 2012Daniel Stricker, Head of Market Research at KI Group

38

MARKET SEGMENT MEETINGS: Friday, 11 May 2012

EPDA is once again off ering the popular Market Segment Meetings. Three market segment meetings will address the primary markets for plastics:

• Signs & Display• Industry• Building & Construction

The presenter for each meeting will off er insights into market and application opportunities for distribu-tors and manufacturers to consider when looking for new business. The presentations will include prod-ucts, applications, trends, regulatory issues, innovations and product substitution threats and opportuni-ties.

10:30 – 11:15, Market Segment Meeting – Signs & DisplayPresenters — Mike Horsten, Mimaki Europe B.V., Patrick Van Soelen, Mimaki Europe

Mike Horsten, Mimaki Europe B.V., and Patrick Van Soelen, Mimaki Europe, will lead attendees through an overview of the current mar-ket for for roll to roll (PVC based, solvent coated) and rigid medias (PVC, polyester, acrylics, ALU). This market is gowing and looking for suppliers.

Mr. Horsten and Mr. Van Soelen will let you know specifi cally what these sign and display companies are looking for and where the opportunities exist.

11:45 – 12:30, Market Segment Meeting – IndustryPresenter — Walter Weterman, ProMaqua GmbH Walter Weterman is the Director International Sales for ProMaqua GmbH and his presen-tion will focus on water industry trends and the relationship between these trends and the plastic industry/distribution. The demographic trend indicates that our European cities will grow. With this growth and the inherent concentrations of people, diff erent methods are needed to look after water distribution, water treatment and water re-use. The high tech and innovative water treatment industry is changing from a product-oriented industry into a solution-oriented industry where high-tech plastics are used to combine these products. Mr Weterman will outline the increasing demand from industry for advice and technical support and in what areas /applications this is expected most. 13:30 – 14:15, Market Segment – Building & Construction Presenter — Miklós Fórizs, Kerrtrade Ltd.

Miklós Fórizs is the Managing Director of Kerrtrade Ltd. He has been working actively in this family business for seven years and has been leading the company for four year. He worked to develop the organization and to guide the company through changing custom-er requirements. Today, aside from general control of the company, he is leading a small team selling plastic products.

39

PANEL SESSIONS: Saturday, 12 May 2012

Distributor Panel Session, 09:30 – 10:45Facilitated by Nick Kraguljac, Zell-Metall GmbH

Panelists: János Bendl, Umundum Kft.; Cecilia Sonesson, Nordic Plastics Group; Calvin Hussey, Righton Ltd.

Back by popular member demand, EPDA will host a distributor panel to discuss the most current business issues aff ecting European plastics distributors. A panel of EPDA member distributors will be led by Nick Kraguljac and will share insights into current business conditions, best practices in distribution, ideas for overcoming challenges for distribution busi-nesses and other pressing issues facing European distributors.

Manufacturer Panel Session, 11:15 – 12:00Facilitated by Maurizio Adreani, Jr., Adreani Spa Panelists: Luca Carabelli, Quadrant EPP; Giovanni Vesco, SIMONA AG; Bryan Welch, Lucite International New for the 2012 Annual Conference will be a manufacturer panel. EPDA member manufacturers will have the opportunity to participate in a panel session led by Maurizio Adreani, Jr., of Adreani Spa, a distributor headquartered in Milan, Italy. Manu-facturer panelists will share their perspectives about how distributors and manufacturers can strengthen their relationships and take better advantage of market opportunities, new and emerging markets for plastics applications and other market insights.

40

FINANCEBalance Sheet — Ending 31 December 2011

(In Euros)

41

FINANCEDetailed Income Statement — For 12 months ending 31 December 2011 In Euros

Unaudited - For Management Purposes Only

42

FINANCEDetailed Income Statement — For 12 months ending 31 December 2011 In Euros

Unaudited - For Management Purposes Only

43

IAPD’s Introduction to Plastics: A Training Manual (11th edition) is more than just a basic text about plastics. It provides the reader a foundation in plastics — how they are made, their properties, how they are used and so much more.

It off ers a systematic approach to selecting plastic materials for certain applications. It is a resource every plastics professional will refer to often.

Now you can obtain it in German, French and Italian, as well as in English*.

Watch your e-mail and www.epda.com for ordering the translation of your choice. Details coming soon.

* The English version is available at www.iapd.org/bookstore .

Introduction to Plastics —in four languages

EPDA off ers new training manual in German, French & Italian

44

EPDA MANUAL ON COMPLIANCE WITH EU COMPETITION LAW

GUIDELINESThe following guidelines are intended to help both EPDA staff and members avoid liability under EU competition laws.

1. Activities During the Meetings

Member representatives responsible for the management of meetings (chairmen) and staff at EPDA meetings, wherever they are held, must never allow to discuss/exchange information relating to:

- prices and resale prices- price trends and/or output and sales, unless the information is sufficiently historic (over six months

old) or public domain- discounts- allowances- credit terms- market share and sales volume of individual companies or groups of companies- profits/costs of individual companies or groups of companies- allocation of geographic marketing areas or sales territories- decisions to quote or bid- matters relating to actual or potential customers or suppliers such as their classification or selection

which can lead to the influence of future competitive behaviour or identify the individual undertaking’s data. This is not an exhaustive list.

2. Meetings Management2.1 EPDA staff and officers of the meetings should issue, in advance, an agenda that must not cover subjects

likely to infringe the competition laws.

2.2 The agenda, registration forms and minutes of meetings shall carry the following words: “EPDA is committed to complying with EU competition law. The participants to this meeting agree to adhere to the EPDA manual on competition law compliance.”

2.3 A lawyer, expert in competition matters, should review the agenda and minutes of all EPDA general assemblies and advise on any anti-competition matters.

2.4 If any prohibited subject should be raised, the officers and/or EPDA staff should request that the conversation be immediately ended. If the discussion is continued, the meeting will be closed and the foregoing recorded in the minutes.

3. Membership Conditions Membership rules should not place any existing or potential member at a competitive advantage or disadvantage.

4. Technical Standards Technical industry standards set up by EPDA should be objective and fully accessible to industry.

45

ANNEXI. Article 81 (ex art. 85) EC Treaty

“The following shall be prohibited as incompatible with the common market: All agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between Member States and which have as their object or effect the prevention, restriction or distortion of competition within the common market (…).” (Article 81, Amsterdam Treaty)

The core provision of the EU competition law is Article 81. It outlaws agreements between undertakings, decisions by associations of undertakings and concerted practices which may affect trade between Member States and which have as their object or effect the prevention, distortion or restriction of competition within the common market.

1. Definitions1.1 Agreements

• An agreement is void when it leads to an appreciable restriction of competition, interfering with the normal interplay of supply and demand.

• There is an agreement wherever there is the necessary consensus between the parties determining the lines of their mutual behaviour on the market.

• An agreement can be horizontal (entered into by undertakings at the same level of production) or vertical (between undertakings at a different level of production), formal or informal and does not need to be in writing or binding on the parties.

• It can also be implied from conduct.

1.2 Decisions• Resolutions of trade associations that act on behalf of their members (resolutions of management

committees, steering committees, general assemblies, etc.).• Recommendations brought to the notice of members and followed by them as an association’s

“policy.”

1.3 Concerted Practices• Coordinated behaviour or aware cooperation without any formal agreement or decision having been

reached.

2. Exemption2.1 “De Minimis” Notice

The Commission issued the “de minimis” notice on the ground of which Article 81 shall not apply to horizontal agreements where the aggregate market share held by the parties to the agreement does not exceed 10 percent and to vertical agreements where the market share held by each of the parties does not exceed 15 percent. In cases where it is difficult to define the agreement as horizontal or vertical, the 10 percent threshold will be applicable.

However, this exemption would not apply to agreements containing hardcore restrictions, such as price fixing, sales limitation and market sharing.

3. Effects of the Infringement3.1 The agreements breaching Article 81 are automatically void and unforceable. 3.2 The EU Commission has wide-ranging powers. It can:

- inspect firms in search of evidence of secret agreements.- enter premises and demand documents* at short notice or without notice (“dawn-raid”). - impose fines of up to 10 percent of worldwide group turnover.

* “documents” mean: information stored on computers, minutes of meetings, notes in diaries, agendas, sales figures, etc.

46

BYLAWSof the European Plastics Distributors Association

April 2012

Article 1Name, Registered Offi ce and Fiscal Year

(1) The Association shall have the legal form of a registered association as an “eingetragener Verein” under German law (i.e. an incorporated association with independent legal existence), and shall have the name “European Plastics Distributors Associa-tion e.V.” (EPDA).(2) The principal offi ce of the Association shall be in Aschaff enburg, Germany (place).(3) The Association is entered in the Register of Associations of the competent Local Court Aschaff enburg.(4) Its fi scal year shall be the calendar year.

Article 2Purpose, Objectives(1) The EPDA shall have the purpose of promoting the business interests of the plastics distributing and plastics processing industry and its members, and of representing them vis-à-vis third parties, in particular by fulfi lment of the following tasks: 1. Keeping the responsible authorities informed of problems, concerns and wishes of its members; 2. Advising and supporting the legislative bodies, and government departments at national and regional levels, as well as in the European Union, in the elaboration and preparation of relevant legislative issues and legal regulations; 3. Elaborating rules of competition where needed, and having them registered with the competent cartel authority; 4. Combating unfair competition in business advertising and in all other forms by all means available, and vigorously opposing any violations of commercial ethics and improper commercial practice; 5. Maintaining contact with the press by means of public relations, keeping the media (specialist and general interest newspapers and magazines) constantly informed of problems, concerns and wishes of the Association and its members, and working for a favourable image and reputation of the Association and its members in public; 6. Monitoring, maintaining and constantly improving the quality and standards of raw materials and semi-fi nished plastic products and plastic articles; 7. Growing the plastics distribution industry through educating the membership and the greater plastics community about the characteristics and benefi ts of plastics materials.

(2) The objectives indicated above are to be achieved by intensive exchange of information and consultation among the members, exchange of experience and cooperation of members among one another, lectures, seminars, working groups and social events, and by the appointment of expert commissions in certain areas. (3) The Association shall not pursue any goals contrary to cartel legislation, and shall abstain from any behaviour and activities that could even give rise to suspicion of a cartel. Departures from these rules may be aff ected exclusively by way of change in the Bylaws, by a resolution of the Meeting of Members.

The Association shall not engage in commercial business.

Article 3Membership

(1) Members of the EPDA may be physical persons or legal entities, or groups of persons or legal entities, whereby the fol-lowing conditions (section 2-4) must be fulfi lled.(2) Membership of the EPDA is subdivided into the following categories: - Distributor members: These are companies that primarily operate as wholesalers for distribution of fi nished or semi-fi nished plastic products/ plastic goods. They must have a total annual sales volume in distribution of plastic products/plastic goods of more than €1 million. Their sales volume in distribution of plastic products/plastic goods must account for at least 25% of the total gross sales volume of the company. - Manufacturer members: These are companies whose primary activities are manufacture of fi nished or semi-fi nished plastic products. They have to make use of distributors for sale of their products, and sell at least 51% of their gross sales volume in plastic products through distributors. - Honorary members and special members: The Board of Directors may by unanimous decision grant a physical person Honorary or Special Membership, if such person has rendered outstanding services to the EPDA or to the plastic processing and distributing industry. The Board of Directors shall determine the duration of such membership and, if applicable, shall determine the amount of the annual membership fee. - Association members: An incorporated association to which a number of companies of the plastic processing or plastic distribution i ndustry belong may be granted membership of the Association under the following conditions: + Such association has been in existence for more than two years; + The members of such association conduct their business in a manner which is in accordance with the practices of the EPDA and with the provisions of the present Bylaws;

47

+ Such association and its members comply with applicable law in their business operations, in particular with the applicable European and international rules of competition.

Exceptions to the above requirements can be made for any membership category by the Board of Directors, provided that this involves no disadvantages for the EPDA.

(3) The EPDA comprises full members and associate members. Full members are those members to whom distributor, manufacturer or association membership has been granted.

Associate members are those to whom honorary or special membership has been granted.

(4) The number of members of the EPDA is not limited, but at least 51% of the full members must be distributor members.

Article 4Rights and Duties of Members; Membership Fees

(1) Every member has the right to use the facilities of the Association and to call upon its support within the framework of the purposes of the Association as set out in the Bylaws.(2) Full members have the following rights: - They shall be invited by the Board of Directors to the annual Meeting of Members; - On request by 30% of the full members, a special Meeting of Members can be convened; - They have the right of voting, which can be exercised at every Meeting of Members; - Their voting right may be exercised by proxy in accordance with the provisions of the present Bylaws, at every Meeting of Members; - They shall be entitled to inspect the register showing the minutes of the Meeting of Members; - Further rights may be granted to full members by the Bylaws.

(3) Full members have the following duties: - Payment of the annual membership fees, and of the admission fees, in accordance with the provisions of the present Bylaws and of the Rules for Membership Fees; - Avoidance of any behaviour that would confl ict with the objectives of the EPDA and the provisions of the present Bylaws; - Further duties may be established by the Bylaws. (4) Associate members have the following rights: - They shall be invited by the Board of Directors to every annual Meeting of Members; if so decided by the Board of Directors, they may also be invited to special Meeting of Members; - Right to inspect the register of minutes of Meeting of Members; - Further rights may be determined by the present Bylaws.

(5) The associate members have the following duties: - Payment of the annual membership fees and the admission fee, in accordance with the provisions of the present Bylaws and of the Rules for Payment of Fees; - Avoidance of any behaviour that would confl ict with the objectives of the EPDA and the provisions of the present Bylaws; - Further duties may be established by the Bylaws. Associate members have no voting rights at the Meeting of Members.

(6) The members shall support the objectives and the standing of the Association to the best of their abilities. They therefore have a duty to comply with commercial standards and ethics and to observe fair behaviour in competition.(7) The EPDA incurs costs in the fulfi lment of its functions, and these are covered by the non-recurring admission fees paid by new members on admission and by the annual membership fees. The details of this, such as the amount, due date for payment, and consequences of late payment, are regulated by the Rules for Membership Fees which are to be adopted by the Meeting of Members. These rules may also specify diff erentiated admission and membership fees. The Meeting of Members may adopt resolutions for special contributions or charges in order to cover the costs resulting from specifi ed projects.

Article 5Admission of New Members

(1) The application for admission, in which the applicant undertakes to comply with the provisions of the Bylaws, is to be addressed on an application form provided by the EPDA to the Board of Directors, which is to decide on admission by unanimous vote.

48

(2) The conditions for admission are as follows: - Compliance with the criteria for the membership categories as set out in Article 3 (2); - At least two years uninterrupted engagement in business in the plastics processing or plastics distribution industry; - A company that seeks distributor membership must have sponsorship from two members of the EPDA or the International Association of Plastics Distribution, at least one of which is a manufacturer member; - A company that seeks manufacturer membership must have sponsorship from at least two distributor members of the EPDA or the International Association of Plastics Distribution.

Article 6Termination of Membership

(1) Membership shall be terminated by: - Death or, in the case of legal entities and associations of persons, dissolution thereof; - Resignation, which is to be declared to the Board of Directors in writing with a period of notice of 3 months prior to the year-ending 31 December; - Formal expulsion, which shall be possibly by resolution of the Meeting of Members (cf. para. 2); - Expulsion by resolution of the Board of Directors, if the member is 2 months or more behind in payment of the annual membership fee, and the Association has already sent two written notices of reminder for payment without eff ect, whereby the fi rst such reminder notice is to be sent not earlier than 4 weeks after the due date for payment, and the second reminder notice is to be sent not earlier than 6 weeks after the due date for payment, making reference to the threatening expulsion, if the member has become insolvent or if the member has violated the relevant rules of competition.

(2) The Meeting of Members may declare expulsion of a member by a 2/3 majority of the votes of full members in attendance, if - The member wilfully violates the objectives or interests of the Association to a signifi cant extent or repeatedly violates them; - The member has been legally convicted of violating anti trust law; - The conditions for admission set out in Article 5 (2) are no longer fulfi lled, or did not exist in the fi rst place;

The Board of Directors shall inform the member aff ected of such expulsion by recorded delivery. Such expulsion resolution may be contested only within a period of 2 months from the date of delivery of such letter.

(3) On termination of membership for the reasons set out above, the former member or its legal successor shall not be entitled to reimbursement, either in full or in part, of the annual membership fee paid.

Article 7Sources of Income

(1) The expenditures and costs arising from the functions of the Association are to be covered by membership fees, donations and other income.

(2) Members are required to pay membership fees and an admission fee on admission to the Association. The amount of the membership fees and admission fees and the due dates for payment of membership fees are decided by the Meeting of Members by means of the separate Rules for Membership Fees. The Board of Directors by majority vote may decide on penalties or penalties assessed to members for late payment of membership fees and/or other amounts due the Association.

Article 8Offi cial Bodies of the Association

The offi cial bodies of the Association are: - The Meeting of Members; - The Board of Directors; - The Advisory Board, which may be formed on resolution of the Meeting of Members from persons who appear suitable for the purpose.

Article 9Meeting of Members

(1) The ordinary meetings of the Meeting of Members shall be convened every year within the period from the fi rst half of May to the second half of June. The Board of Directors shall convene the Meeting of Members by a special written invitation, indicating the agenda. The invitation must be sent by recorded delivery to the last address of each full or associate member known to the Board of Directors, and shall be posted at least one month but not more than three months before the date of the meeting.

The Board of Directors shall determine the agenda, and any full member may submit a written application for addition to the agenda up to a fi nal date of one week before the meeting. Whether such addition is made is up to the Board of Directors, which shall decide at its own discretion and in duty bound. However, it is required to make such addition if such application is supported by one tenth or more of the full members. Any addition is to be notifi ed to the members in the same way as the invitation to the meeting was issued. If that is not possible, the Meeting Chairman shall provide information of such addition at the beginning of the meeting.

(2) A special Meeting of Members shall be convened if required by the interests of the Association or if 30% or more of the

49

full members submit a written request to the Board of Directors to that eff ect.

(3) The Meeting of Members is responsible for ordering the business of the Association, except where allocated by the present Bylaws to another body. It shall in particular adopt resolutions on the following: - Appointment, approval of the acts of and dismissal of Board of Directors members; - Appointment and dismissal of Advisory Board members; - The Rules on Membership Fees; - Any new objectives of the Association; - Expulsion of a member; - Dissolution of the Association and allocation of its assets, requiring a majority of 2/3 of the full members present; - Amendments to the Bylaws, requiring a 2/3 majority of the full members present.

(4) Meetings of the Meeting of Members shall not be open to the public. The Meeting Chairman may admit guests to the meeting, unless the Assembly decides otherwise.

Every full member shall have one vote at the Meeting of Members. Proxy voting shall be permissible. Such power of proxy must be submitted to the Chairman of the Board of Directors in writing at least seven days before the convened meeting.

Mail Ballots. All matters of business, which are subject to a vote, can be submitted to the membership by mail ballot. If a vote is carried out by mail ballot a respite of 60 (sixty) days needs to be granted to the membership to turn in their vote. If the membership has been notifi ed at the time of submission of the mail ballot that the poll shall be deemed closed as soon as a, for the issue in question necessary, majority is reached, this 60 day period can be abbreviated. The mail ballot can be carried out on printed matter or electronically.

These provisions for a mail ballot are also in eff ect for all matters reserved or assigned to the Board of Directors.

If notice thereof is given with the mail ballot, the 60-day period may be waived upon receipt of ballots from a majority of the membership.

The Meeting of Members shall be quorate if properly convened and if at least half of the full members are present or duly represented, or in the case of adoption of a resolution on dissolution of the Association or expulsion of a member at least 2/3 of the full members are present or duly represented. If the requisite attendance is not achieved, the Meeting of Members shall be convened again, observing the provisions applicable for convening a meeting; a new meeting shall be quorate even if attendance is less than the specifi ed levels but at least three full members with voting rights are present, provided that the invitation convening such second meeting contains a reference to the fact that the meeting will be quorate if three or more full members with voting rights are present. Resolutions shall be adopted by the majority of full members present, except in cases of amendment of the Bylaws, expulsion of a member pursuant to Article 6 (2) or dissolution of the Association pursuant to Article 12.

(5) Minutes shall be prepared of the deliberations of the Meeting of Members, and signed by the Minute Keeper. The minutes shall be made accessible to the members in appropriate form within six weeks from the date of the meeting. Any objections to the minutes may be raised only within one month from this time. All minutes shall be retained in a register at the registered offi ce of the Association.

Article 10Board of Directors

(1) The Board of Directors shall comprise the President, Vice President, Immediate Past President, up to two further members of the Board of Directors and appointed committee chairs. (1) Any representative of a distributor member or a manufacturer member is eligible for membership of the Board of Directors, whereby the Board must be composed of at least 51 percent distributor members at any time. (2) The members of the Board of Directors are elected by the Meeting of Members for a term of two years; re-election is permissible, but the offi ce of President of the Board of Directors may be exercised for two years only. The term of offi ce of a member of the Board of Directors ends with taking over of offi ce by the respective successor. If the offi ce of a member of the Board of Directors is terminated prematurely due to death, resignation or expulsion, the Board of Directors, at its discretion, may choose to have the remaining members of the Board of Directors take over that member’s responsibilities until a new member has been elected at the next Meeting of Members, or appoint a candidate to fulfi l the remaining term of the position. (3) The position of President may be fulfi lled by either a representative of a distributor or manufacturer association member in good standing.

50

(4) The Board of Directors shall manage the business of the Association. Its responsibilities include all business which has not been allocated by the Bylaws to the Meeting of Members or the Advisory Board.(5) The Board of Directors makes its decisions by resolutions at meetings of the Board of Directors, which it shall convene at least two times a year, and of which minutes are to be kept. Invitations to meetings of the Board of Directors are to be issued, indicating the agenda, and with a period of notice of one week, by the President or Vice President, whereby the Vice President shall do so only in the event that the President is prevented from doing so. The presence of six Board of Directors members, including the President or Vice President, shall be suffi cient for the Board of Directors to be quorate. Voting shall be by the majority of the Board of Directors members present; in the event of parity of voting, the President or Vice President shall have the casting vote, whereby the Vice President shall have this right only in the event that the President is prevented from attending.(6) The President or Vice President, in the event that the President is unable to attend, shall be entitled to sole representation for acts in law of the Association. In their actions they shall at all times be guided by the purposes of the Association, in particular by the Bylaws and by resolutions of the Meeting of Members, the Advisory Board and the Board of Directors.(7) The offi ce of a member of the Board of Directors’ shall come to an end prematurely under the following conditions: - If the member of the Board of Directors wishes to resign its offi ce prematurely at its own request; - If the company for which the Board of Directors member is a member of the Board of Directors ceases to be a member of the Association; - If the majority of the full members present adopts a resolution for its expulsion.

Article 11Advisory Board

(1) The Advisory Board shall if possible comprise at least fi ve persons, who represent the diff erent areas of interest of the Association and who do not belong to the Board of Directors. The members of the Advisory Board are elected by the Meeting of Members for a term of two years; re-election is permissible, but the offi ce of President of the Board of Directors may be exercised for two years only. The members of the Advisory Board shall elect from among their number a President and Vice President.

(2) The principal function of the Advisory Board is to advise the Board of Directors in all matters concerning the Association. The Advisory Board shall also represent the interests of the members vis-à-vis the Board of Directors in the periods between Meetings of Members. The Board of Directors shall invite the Advisory Board members to its meetings, indicating the agenda, and giving reasonable notice.

Article 12Dissolution

(1) Dissolution of the Association may only be resolved by the Meeting of Members with a majority of 2/3 of the full members present.(2) Division of assets shall then be eff ected in accordance with the provisions of the German Civil Code (BGB). The use of any Association assets remaining after said division of assets shall be decided by the Meeting of Members.

51

DIRECTORYDISTRIBUTORS

• Denotes Key Voting Member

Adreani Spa Via Zuretti 37 Gianfranco Milan, 20125 Italy (39) 026774131 Fax: (39) 0267741303 www.adreani.it vendite@adreani.it • Maurizio Adreani, Jr., Managing Director Maurizio Adreani, Sr.

AgruQuero Thermoplastics, S.L. Polgigono Industrial El Cascajal C/Gaviotas, 1 Pinto, Madrid 28320 Spain (34) 91-692-71-60 Fax: (34) 91-691-50-51 www.agruquero.com compras@agruquero.com • Gabriel Quero, CEO and General Manager Consuelo Carreras, Deputy General Manager

Aikolon Oy Posankuja 3, PO Box 61 Oulu, 90650 Finland (358) 207 7900 40 Fax: (358) 207 7900 50 www.aikolon.fi sales@aikolon.fi • Lari Hahtonen, Purchase Manager Tuija Hahtonen, Sales Manager Martti Hahtonen, Sales Manager Lasse Hahtonen, Managing Director

Angst + Pfister Group Thurgauerstrasse 66 Zürich, CH-8052 Switzerland (41) 44-3066111 Fax: (41) 44-3012340 www.angst-pfister.com ch@angst-pfister.com • Thomas Schaller, Chief Executive Officer Hans Luginbühl, Chief Operating Officer Jörg Stöckler, International Profit Center Leader, Engineering Plastics Technology

Angst + Pfister Ges.m.b.H.Floridsdorfer Hauptstrasse 1/EWien, A-1210 Austria(43) 1258-46010 Fax: (43) 1258-460198at@angst-pfister.comWerner Müller, Business Unit Leader

Angst + Pfister N.V.S.AKleine Laan 26 CSint-Niklaas, BE-9100 Belgium(32) 3-778-0128 Fax: (32) 3-777-8398be@angst-pfister.comTibor van Melsem Kocsis, Business Unit Leader

Angst + Pfister SA33 rue des ChardonneretsBoîte Postale 50 115ZAC Paris Nord IIRoissy, CDG Cedex, F-95950 France(33) 148-632080 Fax: (33) 148-632690fr@angst-pfister.comEmanuelle Bouvier, Business Unit Leader

Angst + Pfister GmbHSchulze-Delitzsch-Strasse 38Stuttgart, D-70565 Germany(49) 711-489-99-20 Fax: (49) 711-489-99-269g.barlo@angst-pfister.comGünter Barlo, Business Unit Leader

Angst + Pfister S.p.A.Via Montefeltro 4Milano, IT-20156 Italy(39) 02-30087-1 Fax: (39) 02-30087-100sales@angst-pfister.itJean-Pierre Baroni, Business Unit Leader

Angst + Pfister B.V.B.P. 752Industrieweg 47-49BC Berkel en Rodenrijs, NL-2651 Netherlands(31) 10-511-3944 Fax: (31) 10-511-7470nl@angst-pfister.comTibor Van Melsem Kocsis, Business Unit Leader

Angst + Pfister AGThurgauerstrasse 66Zürich, CH-8052 Switzerland(41) 44-306-6111 Fax: (41) 44-302-1871ch@angst-pfister.comThomas Schaller, Chief Executive Officer

ARacryl S.A. 37, Peoniou Street Athens, 10440 Greece (30) 210-823-2723 Fax: (30) 210-821-0898 www.aracryl.gr l_arag@otenet.gr • Lida Arageorgis, President Stefanos Thomakos, Executive Manager

ARacryl S.A.94, Ikarou AvenueIraklio, Creta GR-71408 Greece(30) 2810-342-890 Fax: (30) 2810-343-435aracryl@otenet.grMarcos Kostakis, Branch Director

52 • Denotes Key Voting Member

Flexiglaspromet D.O.O.Auto Put Beograd Novi Sad 150bZemun, Belgrade, 11080 Serbia(381) 11-375-7681-5 Fax: (381) 11-375-7654www.plexiglaspromet.co.rsplexiglas@tehnicom.netStefanos Thomakos, General ManagerSanja Skocajic, Managing Director

Arthur Krüger GmbH Technik in Kunststoff Altes Feld 1 Barsbüttel Hamburg, 22885 Germany (49) 40-670-52-143 Fax: (49) 40-670-52-162 www.arthur-krueger.de info@arthur-krueger.de • Nils Krüger, Business Manager

Aver-Tech Ltd. 13 Zh, Pimonenko Str. Kiev, 04050 Ukraine (380) 44-205-38-85 Fax: (380) 44-230-28-55 www.avers.ua o_kurach@avers.ua • Dmytro Muravskyy, Managing Director Ganna Volska, Financial Director

Carlsson & Möller AB Box 22161 Helsingborg, SE-25023 Sweden Garnisonsgatan 45 Helsingborg, S-25266 Sweden (46) 42-253800 Fax: (46) 42-185837 www.c-m.se info@c-m.se • Michael Andersson, Managing Director Gunnar Råvik, Marketing Manager

EPCO Ltd. Felnex Square Cross Green Industrial Estate Leeds, West Yorkshire LS9 OST United Kingdom (44) 113-249-1155 Fax: (44) 113-249-1166 www.epco-plastics.com sales@epco-plastics.com • Chris Knowles, Managing Director Steve Booker, Sales Director Dean Wilson, Operations Director

Eriks Group Boombekelaan, 3 Hoboken, Antwerp 2660 Belgium (32) 3829-2611 Fax: (32) 3828-3959 www.eriks.com marc.vanoost@eriks.be • Johan Francois, Divisional Manager Ingrid Harlophe, Sales Manager Cristina Perez, Internal Sales Manager

Faigle Industrieplast GmbH Grafenweg 31 Hard, 6971 Austria (43) 5574-61310-2181 Fax: (43) 5574-61310-92181 www.faigle.com industrieplast@faigle.com • Karl Boss, Managing Director Oliver Schmid, Sales Manager

Fluorotech Oy Ltd. Kivipyykintie 4 Vantaa, Fin-01260 Finland (358) 20 7770 500 Fax: (358) 20 7770 539 www.fluorotech.fi sales@fluorotech.fi • Christian Sundberg, Chairman of the Board Marko Koljonen, Managing Director

Goncalves Ferreira, LDA. Rua dos Lusiadas 50 - 1 Lisboa, 1300-372 Portugal (351) 21-364-3121 Fax: (351) 21-364-7517 www.gfportugal.com gf@ip.pt • António Goncalves Ferreira, General Manager

Groupe ICM 18 rue des Frères Lumière Chassieu, 69680 France (33) 472792600 Fax: (33) 478904553 www.groupe-icm.com bienvenue@isosudplastics.com • Frederic Roux, President Nicolas Bonnand, General Manager

Industrial Plastics Europe B.V. P.O. 1122 Nieuwegein, 3430 BC Netherlands Montageweg 6 Nieuwegein, 3433 NT Netherlands (31) 30-6066444 Fax: (31) 30-6066370 www.industrialplastics.nl pp.jongmans@industrialplastics.nl • Peter Paul Jongmans, Director Roeland Lambers, Sales Manager

International Plastic Systems Ltd. Seaham Grange Industrial Estate Seaham, County Durham, England SR7 0PT United Kingdom (44) 191-521-3111 Fax: (44) 191-521-3222 www.ipsflowsystems.com sales@ipsflowsystems.com • Kevin Curran, Managing Director Terry Duell, Technical Director David Stidolph, Operations Director

Lentia GmbH Schwarzwaldstrasse 4 Stockstadt/Main, D-63811 Germany (49) 6027-4182-0 Fax: (49) 6027-1533 www.lentia.de info@lentia.de • Rolf Köller, Managing Director

Linatex A/S Smedeholm 3-5 Herlev, DK 2730 Denmark (45) 43538844 Fax: (45) 43531162 www.linatex.dk linatex@linatex.dk • Ole Klaumann, CEO Jan Mortensen, Purchasing Manager Jorn Trustrup, Product Manager

53

Lork Industrias, S.L. Caracas, 11 Barcelona, Barcelona, 08030 Spain (34) 93-346-8212 Fax: (34) 93-311-3060 www.lorkindustrias.com lork@lorkindustrias.com • Monica Jimenez, General Manager Oscar Jimenez, General Manager

Maagtechnic Bereich der Dätwyler Schweiz AG Schneckelerstrasse 9 Füllinsdorf, CH-4414 Switzerland (41) 61-315-3030 Fax: (41) 61-311-4463 www.maagtechnic.ch kunststoffzentrum-ch@maagtechnic.com • Elio A. Orlando, Market Development Amorphous and Plastics Technology

Maagtechnic SodedZAC Les Echavagnes BP 150Saint Marcellin, 38160 France(33) 47-664-6030 Fax: (33) 47-664-6031j.van-houteghem@maagtechnic.frJacques Van Houteghem, General Managerl.deuner-oghlou@maagtechnic.frLijana Deuner-Oghlou, Purchasing Manager

Merrem Materials B.V., NL P.O. Box 2134 Zaltbommel, 5300 CC Netherlands Veilingweg 2 Zaltbommel, 5301 KM Netherlands (31) 418-578960 Fax: (31) 418-578997 www.merrem-materials.com kunststoffen@merrem-materials.com • John Leonhardt Jaco Frankfort, Global Business Manager

Muoviura Ltd. Kyttiläntie 12 Riihimäki, 11710 Finland (358) 2019-81060 Fax: (358) 2019-81062 www.muoviura.fi kent.lindholm@muoviura.fi • Kent Lindholm, Managing Director Stig Lindholm, Director, Sales & Vendor Relations

Nordic Plastics Group Grimboåsen 10 Box 8724 Gothenburg, 402 75 Sweden (46) 31-742-5400 Fax: (46) 31-742-5490 www.npgroup.se per.gullstrand@npgroup.se • Göran Palmqvist, Managing Director Per Gullstrand, Managing Director Peter Puch, Sourcing Manager Cecilia Sonesson, Director Sourcing and Supply

Perspex Distribution Limited 2-3 Lonebarn Link Springfield Business Park Chelmsford, Essex, England CM2 5AR United Kingdom (44) 1245-232800 Fax: (44) 1245-232801 www.perspex.co.uk keith.piggott@perspex.co.uk • Keith Piggott, Managing Director Craig Dodson, Director and Branch Manager

Perspex Distribution LimitedUnit 14/15 Walker Park Industrial EstateWalker Road, GuideBlackburn, Lancashire, England BB1 2QE United Kingdom(44) 1254-272800 Fax: (44) 1254-272801sales.blackburn@perspex.co.ukJonathan Marsden, Branch Manager

Perspex Distribution LimitedUnit C, Vanguard, Tame ParkNinian Way, WilnecoteTamworth, England B77 5DY United Kingdom(44) 1827-263900 Fax: (44) 1827-263901sales.tamworth@perspex.co.ukPaul Neal, Branch Manager

Perspex Distribution LimitedUnit A305 Vickers Drive NorthBrooklands Industrial ParkWeybridge, Surrey KT13 0YU United Kingdom(44) 1932-356900 Fax: (44) 1932-356901sales.weybridge@perspex.co.uk

Plastena Ireniskiu Area, Garliava Administration Kaunas District, LT-53277 Lithuania (370) 37-393682 Fax: (370) 37-393499 www.plastena.lt nerijus@plastena.lt • Nerijus Raulynaitis, Director Almina Buseikaité, Sales Manager Irena Navickiene, Sales Manager Gintautas Vasiliauskas, Commercial Director

PlastenaKatlakalna 1Riga, LV-1073 Latvia(370) 6871-3054 Fax: (371) 777-5774riga@plastena.comRaimondas Azens, Director

Plexicril Vereda Alminhas das Barrancas, 137 Feiteira Pedroso, 4415-343 Portugal (351) 22-745-4009 Fax: (351) 22-745-7086 www.plexicril.com anselmorebelo@plexicril.pt • Anselmo Rebelo, Business Manager Cintia Rebelo, Commercial Director

Polimark SRL Via Talamoni, 6 Brugherio, 20861 Italy (39) 039-2874-512 Fax: (39) 039-2874-523 www.polimarksrl.com info@polimarksrl.com • Luciano Bergna, President Emiliano Magni, Vice President

Polytron Kunststofftechnik GmbH & Co. KG An Der Zinkhutte 17 P.O. Box 51469 Bergisch-Gladbach, 51469 Germany (49) 2202-1009-0 Fax: (49) 2202-1009-33 www.polytron-gmbh.de info@polytron-gmbh.de • Fred Arnulf Busen, Managing Director Stefan Schneiders, Purchase Department Andreas Stenke, Head of Sales

• Denotes Key Voting Member

54

ProSEP Carcea, Strada Complexului Nr 10Craiova, Dolj 207206 Romania(40) 251-439-538 Fax: (40) 251-437-774www.prosep.ro or www.seplastics.ropadureanu@prosep.ro• Constantin Padureanu, Director General

Pyrasied Xtreme Acrylic B.V. Apolloweg 26Leeuwarden, 8938 AT Netherlands(31) 58-2150651 Fax: (31) 58-2151847www.pyrasied.nlsales@pyrasied.nl• Sied J. Kooistra, Owner

Righton Ltd. Righton HouseElliott Way, Nexus PointHolford Birmingham, England B6 7AP United Kingdom(44) 121-356-1141 Fax: (44) 121-344-3210www.righton.co.ukmarketing@righton.co.uk• Calvin Hussey, Managing Director

Righton Ltd. Service Centre120 Cambuslang RoadGlasgow, G32 8EB United Kingdom(44) 141-646-3730 Fax: (44) 141-641-8012glasgowsales@righton.co.uk

Righton Ltd. Service CentreUnits 7-10, Waverley RoadBeeches Industrial Estate, YateBristol, England BS37 5FF United Kingdom(44) 1454 318601 Fax: (44) 1454 273392bristolsales@righton.co.uk

Righton Ltd. Service CentreUnit 5, Adwalton Moor Business Park1 Battlefield ViewDrighlington, West Yorkshire, England BD11 2PT United Kingdom(44) 1274-713200 Fax: (44) 1274-713201leedssales@righton.co.uk

Righton Ltd. Service Centre6A Yew Tree Way, Stonecross ParkGolborne, England WA3 3JD United Kingdom(44) 1942 407900 Fax: (44) 1942 726700manchestersales@righton.co.uk

Righton Ltd. Service CentreUnit B, Sands Industrial EstateHillbottom RoadHigh Wycombe, Bucks, England HP12 4HS United Kingdom(44) 49-444-8711 Fax: (44) 49-453-5862wycombesales@righton.co.uk Righton Ltd. Service CentreUnits 5-6, The Nelson CentrePortfield Road, HilseaPortsmouth, England PO3 5SF United Kingdom(44) 23-92-623070 Fax: (44) 23-92-677502portsmouthsales@righton.co.uk

Righton Ltd. Service CentreLong AcreSaltash Parkway Industrial EstateSaltash, Cornwall, England PL12 6L2 United Kingdom(44) 175-284-4931 Fax: (44) 175-284-2130plymouthsales@righton.co.uk

Righton Ltd. Service CentreBrookvale RoadWitton, Birmingham, England B6 7EY United Kingdom(44) 121-356-4822 Fax: (44) 121-344-3805birminghamsales@righton.co.uk

Robert Horne Sign & Display Huntsman House Mansion Close, Moulton Park Northampton, England NN3 6LA United Kingdom (44) 1604-673-434 Fax: (44) 1604-673-435 www.roberthorne.co.uk rhsd.hq@roberthorne.co.uk • Bryan Heath, Plastics Industry Consultant Clare Burke, Marketing Manager Adrian Dennis, Divisional Director, Sign & Display Steve Jones, Sales Manager Richard Staines, Branch Manager

Robert Horne Sign & DisplayHuntsman HouseBonville RoadBrislington, Bristol, England BS4 5QF United Kingdom(44) 117-972-5888 Fax: (44) 117-972-5899rhsd.bristol@roberthorne.co.ukAmanda Delaney, Branch Manager

Robert Horne Sign & DisplayRefuge House9-10 RiverfrontEnfield, England EN1 3SZ United Kingdom(44) 208-884-7080 Fax: (44) 208-366-3495rhsd.londoneast@roberthorne.co.ukSteve Skinner, Branch Manager

Robert Horne Sign & DisplayHuntsman HouseStourton Link, Pontefract RoadHunslet, Leeds, England LS10 1DD United Kingdom(44) 113-387-2444 Fax: (44) 113-271-9397rhsd.leeds@roberthorne.co.ukJohn Morris, Branch Manager

Robert Horne Sign & DisplayHuntsman House, Tenax RoadTrafford ParkManchester, England M17 1JT United Kingdom(44) 161-876 4050 Fax: (44) 161-848-8369rhsd.manchester@roberthorne.co.ukJane Erskine, Operations Manager

Robert Horne Sign & DisplayUnit 3, Nicholson Drive, MalluskNewtownabbey, North Ireland BT36 4FB United Kingdom(44) 28-9084-5464 Fax: (44) 28-9034-2414rhsd.nireland@roberthorne.co.ukPaul Williams, Branch Manager

• Denotes Key Voting Member

55

Robert Horne Sign & Display211 MacLellan StreetKinning ParkGlasgow, Scotland G41 1RR United Kingdom(44) 141-427-6111 Fax: (44) 141-427-6004rhsd.scotland@roberthorne.co.ukIsobel McGinty, Branch Operations Manager

Senova Kunststoffe GmbH & Co. KG Gewerbestrasse 12 Uttendorf, A-5723 Austria (43) 6563-2002061 Fax: (43) 6563-2002077 www.senova.com office@senova.com • Klaus Laireiter, Chief Executive Officer

ThyssenKrupp Plastics GmbH AM Thyssenhaus 1 Essen, 45128 Germany (49) 201-844535420 Fax: (49) 201-8456535420 www.thyssenkrupp.com info@thyssenkrupp.com • Juergen Westphal, Chairman of the Management Board Falk Majert, Member of the Management Board

Ferona Thyssen Plastics S.R.A.ul. CSA 730 Velka BystriceOlomouc, CZ-77230 Czech Republic(420) 585-151-214 Fax: (420) 585-351-807www.feronathyssen.czmichal.stockert@feronathyssen.czMichal Stockert, Managing Director

Tööstusplast Ltd. Vahi tee 7 Vahi Küla Tartu Vald, 60534 Estonia (372) 7-377-820 Fax: (372) 7-377-821 www.tplast.ee tplast@tplast.ee • Alar Künnapuu, Manager

SIA IndustriplastsKrustpils Street 4Riga, LV 1073 Latvia(371) 67-248-272 Fax: (371) 7-113-526www.industriplasts.lvindustriplasts@industriplasts.lvAirita Ergle-Sulzanoka, Member of Board

Traid Villarroya Hnos. S.L. Isabel De Santo Domingo No. 35 Zaragoza, 50014 Spain (34) 976-471211 Fax: (34) 976-472841 www.traidvillarroya.com traid@traidvillarroya.com • Jesús Traid Bescós, Assistant Director

Tuplex Sp. z.o.o. ul. Ksiecia Ziemowita 19 Warszawa, 03-778 Poland (48) 225113100 Fax: (48) 225113101 www.tuplex.pl warszawa@tuplex.pl • Pawel Wieczorek, Business Development Manager Renata Tulwin, President

Umundum Kft. Gyár utca 2. (BITEP) (Alpok-Adria Logisztikai Központ) Budaörs, 2040 Hungary (36) 23-889-748 Fax: (36) 23-889-749 www.umundum.hu bendl@umundum.hu • János Bendl, Managing Director

Vink Holdings Ltd. Holmes House 24-30 Baker Street Weybridge, Surrey, England KT13 8AU United Kingdom (44) 1932-835000 Fax: (44) 1932-835002 www.amariplastics.com ho@amariplastics.com • David W. Williams, Chief Executive Officer Helen Elkin, Personal Assistant Robin Howard, Chief Financial Officer David Ladyman, Director, Supplier Relations

Vink BerlinNobelstrasse 20Berlin, D-12057 +49 (0)306097810berlin@vink-kunststoffe.deMatthias Ramrath, Manager

Vink Esslingen/Herzog PlasticEckener Strasser 2Esslingen, D-73730 +49 (0) 711360080emmerich@vink-kunststoffe.deBernd Grosse, Manager

Vink MannheimMarkircher Strasse 14-16Mannheim, D-68229 +49 (0) 6214608460mannheim@vink-kunststoffe.deRalf Reichelt, Manager

Vink BelgiumIndustriepark 7Heist-op-den-Berg, B-2220 Belgium(32) 15-259701annita.torfs@vink.beJohan VanderSande, Division ManagerEric Muys, Manager

Vink Plasty sro BrnoPC 101 BrnoKaslanova 141 D, CZ-617 00 Czech Republic+420 543 234Brno@vink.czDavid Vlachopulos, Manager

Vink Plasty sro PraguePC 102 PrahaAreal Napako, Magistru 13Praha 4, CZ-140 00 Czech Republic+420 244 094 235praha@vink.czTomas Javurek, Manager

• Denotes Key Voting Member

56

Duka Ventilation Vink PlastKristrup Engvej 9Randers, DK-8960 Denmark(45) 8911-0100 Fax: (45) 8641-5890www.vink.comduka@vink.dkJann Eiskjeer, Manager

Vink Plast ASKristrup Engvej 9Randers, DK-8960 Denmark(45) 8911-01 00 Fax: (45) 8641-5890www.vink.cominfo@vink.comWalter Blunck, Manager

Vink KeravaSilokalliontie 6Kerava, 04250 Finland+358 207 444 300info@vink.fiReijo Asikainen, Manager

Vink OuluMessipojantie 17Oulu, 90520 Finland+358 207 444 400infor@vink.fiJukka Kelavuori, Manager

Vink TampereAaporankatu 14Tampere, 33840 Finland+358 207 444 440info@vink.fiArto Seppa, Manager

Vink Douai1695 Route de TournaiBP 0333, DouaiCedex, 59351 France03 27713710vinkdouai@fr.vink.comBernard Renault, Manager

Vink Nantes3 rue d’AllemagneBP3342344334 NantesCedex 3, France02 51896780 Fax: 02 40689003vinknantes@fr.vink.comXavier Simon, Manager

Vink Bordeaux1 Allee des PeupliersFloirac, 33270 France05 56291515vinkbordeaux@fr.vink.comEric Nerin, Manager

Vink Le Mans17-19 Rue Francois MonierLe Mans, 72100 France02 43185400vinklemans@fr.vink.comNicolas Zimmerman, Manager

VTI - TuyauterieZI de la BriqueterieAvenue de la GareLouvres, 95380 France01 34477594vti@fr.vink.comJean Paul Normand, Manager

Vink LouvresZI de la BriqueterieAvenue de la GareLouvres, 95380 France01 34477540vinklouvres@fr.vink.comAlain Tanghe, Manager

Vink LyonZA de Corbas Montmartin20 Rue Louis PradelLyon, 69960 France04 72281041vinklyon@fr.vink.comEric Poirieux, Manager

Vink Rouen10 Rue Francois Arago ZISotteville-Les-Rouen, 76300 France02 35629795vinkrouen@fr.vink.comJean Paul Hanne, Manager

Vink Toulouse5 Chemin CarossseZI MontaudranToulouse, 31400 France05 61409640vinktoulouse@fr.vink.comLaurent Depetris, Manager

Vink MarseilleZI des Estroublans, Le Forum 142 Rue de RomeVitrolles, 13127 France04 42075000vinkvitrolles@fr.vink.comChristophe Viaux, Manager

Vink EmmerichTackenweide 48Emmerich am Rhein, D-46446 Germany+49 (0) 28 22 60 60emmerich@vink-kunststoffe.deKarl-Heinz Bremmer, Manager

Vink Nürnberg/D&L KunststoffeHahnenbalz 35 Halle 3Nurnberg, D-90411 Germany+49 (0) 9115972770nuernberg@vink-kunststoffe.deUdo Dobberke, Manager

Nyomdaker kft.Tablas utca 36-68Budapest, H-1097 Hungary36 1 215 3586 Fax: 36 1 476 0260nyomdaker@nyomdaker.huCsilla Jakus, Manager

• Denotes Key Voting Member

57

Vink Plast KftNagytetenyi ut 112Budapest, H-1222 Hungary36 1 424 0380vink@vinkplast.huPeter Pasztor, Manager

VT Plastics BVPostbus 13464700 H RoosendaalNetherlands+31 (0) 165513953info@vtplastics.nlFrancis Aarts, Manager

Vink Lighting DivisionBergvredestraat 7GK DidamNL 6942 Netherlands+31 316 298911info@nl.vink.comDavid Foreman, PCM

Vink HandelBergvredestraat 7GK Didam, NL 6942 Netherlands+31 316 298911info@nl.vink.comHenk Abma

Vink TechniekEndepoelstraat 1GL Didam, NL 6942 Netherlands+31 316 298870vink.techniek@nl.vink.comMarcel ten Thije, PCM

Vink Norway AS RogalandVardheivegen 54Bryne, NO 4340 Norway+47 51786122info@vink.noJohn Gunnar Heskestad, Manager

Vink Norway AsPb 59 HolmliaOslo, 1201 Norway2276 60 00info@vink.noBjorn Haakenstad Nilsen, Manager

Bilbao - Plasticos San IgnacioPortubidea 10 Modulo 7Pol Ind SondikaSpain944 538 163bilbao@lermontplastics.esJose Ignacio Martin, Manager

Alicante - KinplastRosa de los Vientos 18Alicante, 03007 Spain965 175 467kinplast@lermontplastics.esCarlos Iraola, Manager

Vink Plastics Spain SLU, Lermont PlasticsBosquerons, 3 nave 1PI Can Busquerons de BaixMontornes del VallesBarcelona, 08170 Spain935 683 961lermont@lermontplastics.esRafael Riera, Manager

Lermont - MadridBuenos Aires, 10 Boulevard CentralParque Industrial CamporrossoMadrid, 28806 Spain918 023 090madrid@lermontplastics.esJaime Ferrnandez, Manager

Lermont MalagaAlcalde Guillermo Rein 34-3 Nave 1Poligono Ind El VisoMalaga, 29006 Spain952 326 441malaga@lermontplastics.esJuan Carlos Tena, Manager

Vink essåplast Group ABHamneviksvagen 99Goteborg, 418 79 Sweden+46 31 64 96 00info@vink.seJonas Adolfsson, Manager

Vink essåplast Group ABRidspögatan 11Malmö, 213 77 Sweden+46 40671 97 00info@vink.seRonny Engdahl, Manager

Vink essåplast Group ABStockholmsvagen 26Upplands Väsby, 194 54 Sweden+46 8 590 79 500info@vink.seJoakim Newman, Manager

Vink AG DietikonSilbernstrasse 10Dietkon (ZH), CH-8953 Switzerland+41 (0) 447439595info@vink.chMarcel Isler, Manager

Vink SA YvonandChemin des Cerisiers 27Yvonand, CH-1462 Switzerland+41 (0) 215332540info@vink.chMarcel Isler, Manager

Amari Plastics PLCAmari HousePaycocke RoadBasildon, Essex, England SS14 3NW United Kingdom(44) 1268-884444 Fax: (44) 1268-884466el@amariplastics.comToni Cobbett, Manager

• Denotes Key Voting Member

58

ABP (Amari Building Plastics)Amari HousePaycocke RoadBasildon, Essex, England SS14 3NW United Kingdom(44) 1268-884460 Fax: (44) 1268-884440abp.basildon@amariplastics.comColin Pearce, Manager

Amari Plastics PLCGlaisdale Drive EastBilborough, Nottingham, England NG8 4GU United Kingdom(44) 115-942-5110 Fax: (44) 115-942-5070em@amariplastics.comSteve Hovey, Manager

ADS (Amari Digital Supplies)Unit 4, Glaisdale PointBilborough, Nottinghamshire, England NG8 4GP United Kingdom(44) 115-982-9770 Fax: (44) 115-982-9771ads@amariplastics.comKaren Heenan, Manager

Vink Lighting Solutions (VLS)Unit 8, Beldray ParkMount PleasantBilston, West Midlands, England WV14 7NH United Kingdom(44) 1902-409205 Fax: (44) 1902-409378sns@amariplastics.com

Amari Plastics PLCUnit 1, St. Philips CentralAlbert Road, St. PhilipsBristol, England BS2 0XJ United Kingdom(44) 117-972-3900 Fax: (44) 117-977-2722br@amariplastics.comRobert Weeks, Manager

AI International12 Napier CourtWardpark Industrial EstateCumbernauld, England G68 0LG United Kingdom(44) 1236-781313 Fax: (44) 1236-781326cumbernauld@aiplastics.comAlan Gage, Manager

GPTUnit 15 , Suttons Business ParkSutton Park AvenueEarley Reading, England RG6 1AZ United Kingdom(44) 118 9294 429 Fax: (44) 118 9664 440info@g-p-t.co.ukStuart Cale, Manager

Recycled Plastics57-61 Cutlers RoadSouth Woodham FerrersEssex, England CM3 5XJ United Kingdom(44) 1245-426666 Fax: (44) 1245-320592recycled@ukap.co.ukJohn Brooks, Manager

Amari Plastics PLCUnit 2, The Dukeries, Dukesway WestTeam Valley Trading EstateGateshead, Tyne & Wear, England NE11 0PZ United Kingdom(44) 191-487-7759 Fax: (44) 191-482-0979ne@amariplastics.comColin Rowntree, Manager

SEP (Specialist Engineering Plastics)Unit 4, Ellesmere Business ParkSwingbridge RoadGrantham, Lincolnshire, England NG31 7XT United Kingdom(44) 1476-574476 Fax: (44) 1476-592262sep@amariplastics.comBen Senior, Manager

UKAPStirling House21/25 Station LaneHornchurch, Essex, England RM12 6JL United Kingdom(44) 1708-447788 Fax: (44) 1708-441111sales@ukap.co.ukIan Byatt, Manager

Kenilworth Daylight CentreUnit 6, Princes Drive Industrial EstateKenilworth, Warwickshire, England CV8 2FD United Kingdom(44) 1926-511411 Fax: (44) 1926-854155daylightcentre@btinternet.comAndy Lloyd, Manager

Amari Plastics PLCElland Road Industrial EstateElland WayLeeds, England LS11 OEY United Kingdom(44) 113-276-0666 Fax: (44) 113-276-0467le@amariplastics.comPaul Rawson, Manager

AI InternationalUnit 32ALeeway Industrial EstateLeeway, Newport, England NP19 4SL United Kingdom(44) 1633-271003 Fax: (44) 1633-282716newport@aiplastics.comPhil Gerrish, Manager

Amari Plastics PLC2 Cumberland AvenuePark RoyalLondon, England NW10 7RL United Kingdom(44) 20-8961-1961 Fax: (44) 20-8961-9194wl@amariplastics.comJim Davies, Manager

Amari Plastics PLCUnit A, Cobalt WayMiddleton JunctionManchester, England M24 1NN United Kingdom(44) 161-785-3560 Fax: (44) 161-643-3950nw@amariplastics.comChris Glendenning, Manager

59

Amari Plastics PLCUnit 1, Caley CloseSweetbriar Road Industrial EstateNorwich, Norfolk, England NR3 2BU United Kingdom(44) 1603-787777 Fax: (44) 1603-787917ea@amariplastics.comSteve Longhurst, Manager

Amari Plastics PLCUnit 17, Beli ParkNewnham Industrial EstatePlympton, England PL7 4TA United Kingdom(44) 1752-345933 Fax: (44) 1752-345583pl@amariplastics.comMark Skinner, Business Development Manager

Marco IndustriesUnits 1 & 2152 Staplehurst RoadSittingbourne, Kent, England ME10 1WZ United Kingdom(44) 1795-436600 Fax: (44) 1795-435714info@marcoindustries.co.ukRay Connolly, Manager

Amari Plastics PLCRoyal London Park, Flanders RoadHedge EndSouthampton, Hants, England SO30 2LG United Kingdom(44) 1489-787011 Fax: (44) 1489-784874so@amariplastics.comAlan Vigar, Manager

Stephen Webster PlasticsBrick Knoll ParkAshley RoadSt. Albans, Hertfordshire, England AL1 5UG United Kingdom(44) 1727-863138 Fax: (44) 1727-844291sales@stephen-webster.co.ukPatrick Ottens, Manager

Plastestrip Profiles1-4 Enterprise UnitSt. Austell Enterprise ParkSt. Austell, Cornwall, England PL25 4EJ United Kingdom(44) 1726-74771 Fax: (44) 1726-69238sales@plastestrip.comClaire Hemingway, ManagerPatrick Hennelly, Manager

Amari Plastics PLCUnit 1, Wednesbury OneBlack Country New RoadWednesbury, West Midlands, England WS10 7NZ United Kingdom(44) 121-567-3400 Fax: (44) 121-567-3401bm@amariplastics.com

Amari Plastics PLCUnits 20-22, Kenneth WayWilstead Industrial ParkWilstead, Bedford, England MK45 3PD United Kingdom(44) 1234-744840 Fax: (44) 1234-744849bd@amariplastics.comBob Hensher, Manager

AI InternationalUnit 15, Shield DriveWardley Industrial EstateWorsley, Manchester, England M28 2QB United Kingdom(44) 161-727-0250 Fax: (44) 161-727-0259manchester@aiplastics.comPaul Atherton

Amari Plastics PLC4 Masterton WayTannochside Park, UddingtonGlasgow, Scotland G71 5PT United Kingdom(44) 1698-802600 Fax: (44) 1698-802601gl@amariplastics.comStewart Ogilvie

Amari Plastics PLCParc Ty-Glas Industrial EstateLlanishen, Cardiff, Wales CF14 5DU United Kingdom(44) 29-2076-2302 Fax: (44) 29-2076-2207sw@amariplastics.comAndy Smith, Manager

Vitroflex Advanced Plastics C. Romaní, No. 2 Poligono Industrial Riudellots de la Selva, 17457 Spain (34) 972-477-705 Fax: (34) 972-478-439 www.vitroflex.com export@vitroflex.co • Ricardo Gama, Export Manager

60• Denotes Key Voting Member

MANUFACTURERS

AGRU Kunststofftechnik GmbH Ing.-Pesendorfer-Straße 31 Bad Hall, A-4540 Austria (43) 7258-790-0 Fax: (43) 7258-3863 www.agru.at office@agru.at • Alois Gruber, Managing Director

Brett Martin Ltd. 24 Roughfort Road Mallusk, Co. Antrim, N. Ireland BT36 4RB United Kingdom (44) 28-9084-9999 Fax: (44) 28-9083-6666 www.brettmartin.com mail@brettmartin.com • Duncan Smith, Sales Director Europe Michael Colquhoun, Director of Export Sales Hayley Lowry, Primary Marketing Contact/Marketing Manager

Centroplast Engineering Plastics GmbH Unterm Ohmberg 1 Marsberg, 34431 Germany (49) 2992-9704 700 Fax: (49) 2992-9704730 www.centroplast.de info@centroplast.de • Ulrich Terbrüggen, Managing Director Karl-Heinz Bielefeld, Director Sales & Marketing

A/S Rolf Schmidt Industriplast Jernet 4 H Kolding, DK-6000 Denmark (45) 7553-4166 Fax: (45) 7550-4715 fla@rsip.com Flemming Andreassen, Managing Director

Clax Italia Via Trieste 4 Pomezia (Rome), 00040 Italy (39) 0-69120652 Fax: (39) 0-69120655 www.claxitalia.com info@claxitalia.com • Roberto Munzi, President

Ensinger GmbH Rudolf-Diesel-Str. 8 Nufringen, D-71154 Germany (49) 7032-819-102 Fax: (49) 7032-819-220 www.ensinger-online.com info@ensinger-online.com • Martin Baras, Director - Sales and Marketing Holger Werz, Application Engineer

Ensinger France Sarl ZAC Les Batterses ZI Nord Beynost, F-01700 France (33) 4-78553635 Fax: (33) 4-78556841 contact@ensinger.fr Olivier Gauby, Sales Manager

Ensinger Italia S.R.L. Via Franco Tosi 1/3 Olcella di Busto Garolfo, I-20020 Italy (39) 0331-568348 Fax: (39) 0331-567822 piatti@ensinger.it Paolo Senatore, General Manager Shapes Division

Ensinger Ltd. Wilfried Way Tonyrefail, Mid Glamorgan, Wales CF39 8JQ United Kingdom (44) 1443-678400 Fax: (44) 1443-675777 pauldavid@ensinger.ltd.uk Paul David, Director Shapes Division

Fluorseals S.P.A. Via Tribolina 20/22 Grumello Del Monte Bergamo, 24064 Italy (39) 035-449-2811 Fax: (39) 035-831-410 www.fluorseals.it sales@fluorseals.it • Giorgio Greco, Managing Director Paola Giorgo, Customer Care, Front Office Manager Paolo Greco, Sales Manager

Foamalite Limited Loch Gowna Co. Cavan, Ireland (353) 43-66-83525 Fax: (353) 43-66-83523 www.foamalite.ie info@foamalite.ie • Tom Nulty, General Manager Cathal Hawkins, PVC Operations Manageer Enda McDonagh, Sales & Marketing Manager Teri Shanahan, Customer Service Manager

GAMMACRIL s.r.l. Via Ticino, 76 Nerviano (MI), 20141 Italy (39) 0331-415425 Fax: (39) 0331-586751 www.gammacril.com info@gammacril.com • Fabrizio Guerra, Chief Executive Officer Mario Rotelli, Sales Manager

ITAL Plastics GmbH IM Euler 9 55129 Mainz, Germany (49) 6131-6279127 Fax: (49) 6131-6279680 info@italplastics.com Antonino Oddo

GEHR GmbH Casterfeldstraße 172 Mannheim, 68219 Germany (49) 621-8789-0 Fax: (49) 621-8789-200 www.gehr.de info@gehr.de • Thorsten Fuessinger, Sales & Marketing Director Helmut Gehr, Chief Executive Officer

61• Denotes Key Voting Member

GEVACRIL Str. Vicinale Paolina, 1 Melzo, Milan, 20066 Italy (39) 02-95737351 Fax: (39) 02-95737357 www.gevacril.com info@gevacril.com • Valerio Cattaneo, Vice President Antonio Villa, Logistic Manager

GEVACRIL Germany Rischerstr. 10 Heidelberg, D-69123 Germany (49) 6221-752652 Fax: (49) 6221-752653 www.gevacril.com p.cattaneo@gevacril.com Paolo Cattaneo, Director of Business Development

Global EPP Conqueror House 75 Hastings Road Leicester, LE5 OHU United Kingdom (44) 116-246-3311 Fax: (44) 116 246 3354 www.globalepp.com sales-uk@globalepp.com • Lennaert DeBokx, European Sales Manager Jochen Staudt, Director

Guarniflon SpA Via T. Tasso 12 Castelli Calepio (BG), 24060 Italy (39) 035-449-4311 Fax: (39) 035-449-4336 www.guarniflon.com info@guarniflon.com • Gianstefano Foresti, International Sales & Operations Manager Gualtiero Colleoni, Marketing Manager & International Sales Fabio Saladini, Chief Executive Officer

Klöckner Pentaplast GmbH & Co. KG Industriestrasse 3 -5 Heiligenroth, 56412 Germany (49) 2602-915-0 Fax: (49) 2602-915-297 www.kpfilms.com info@kpfilms.com • Steffen Oellers, Vice President Specialties Business Unit

Licharz GmbH Industriepark Nord 15 Bucholz, 53567 Germany (49) 2683-977-0 Fax: (49) 2683-977-111 www.licharz.de info@licharz-mail.de • Marc Walter Licharz, Managing Director Andreas Weidenfeld, Sales Manager

Licharz Sarl Zl de Leveau, Entree G Vienne, FR-38200 France (33) 474-318708 Fax: (33) 474-318707 www.licharz.fr info@licharz.fr Eric Grandperret, Managing Director

Licharz Ltd. 34 Lanchester Way Royal Oak Industrial Estate Daventry Northants, England NN11 8PH United Kingdom (44) 1327-877-500 Fax: (44) 1327-877-333 www.licharz.co.uk sales@licharz.co.uk Paul Charles, Managing Director

Lucite International UK Ltd. P.O. Box 34 Darwen, Lancashire, England BB3 1QB United Kingdom (44) 1254-874-444 Fax: (44) 1254-874-098 www.luciteinternational.com contactus@lucite.com • Bryan Welch, Materials Sales Director - EAME

Madreperla Spa Via Aquileja 39/41 Cinisello Balsamo, 20092 Italy (39) 0-26124101 Fax: (39) 0-266012242 www.madreperlaspa.com madreperla@madreperlaspa.com • Antonella Annunziata, Managing Director Massimo Magistrini, Marketing & Sales Manager

Madreperla France S.A. 24, Rue Louis Braille - Z.I. Le Val Morangis, F-91420 France (33) 1-60491617 Fax: (33) 1-60491626 madreperla@wanadoo.fr P. Le Toullec

Madreperla S.p.A. Vertretung Siegfried Raatz Ringofenstrasse 3a Remagen, D-53424 Germany (49) 2642-99810 Fax: (49) 2642-998116 www.raatz-kunststoffe.de info@raatz-kunststoffe.de S. Raatz

Manifattura Cattaneo Spa Via Tevere 19 Samarate Varese, 21017 Italy (39) 0-331-220500 Fax: (39) 0-331-223201 www.manifatturacattaneo.it moreschi@manifatturacattaneo.it • Eros Provasoli, Sales Manager Sergio Crespi, Export Manager Cristina Moreschi, Customer Service

Murdotec Kunststoffe GmbH & Co. KG Heßlingsweg 8 Dortmund, NRW 44309 Germany (49) 231-20609-541 Fax: (49) 231-20609-539 www.murdotec.de hoehner@murtfeldt.de • Detlev Höhner, Chief Executive Officer Andreas Balla, Chief Operating Officer Josef Ikemann, Chief Operating Officer

62 • Denotes Key Voting Member

Nylacast Limited 200 Hastings Road Leicester, England LE5 0HL United Kingdom (44) 116-276-8558 Fax: (44) 116-274-1954 www.nylacast.com sales@nylacast.com • Tan Ali, Sales & Marketing Director Sumayyah Mahomed, International Sales Manager Mussa Mahomed, Chief Executive Officer

Omnia Plastica Spa Via Certosa 7 Busto Arsizio, 21052 Italy (39) 0331-340153 Fax: (39) 0331-350076 www.omniaplastica.it salesengp@omniaplastica.it • Osvaldo Castiglioni, Director Luca M. Castellanza, Marketing Director Camilla Ciapparella, Export Manager

ORBILAN GmbH Kunststoffwerk Eichenkamp 34 Rosendahl-Osterwick, 48720 Germany (49) 2547-9301-0 Fax: (49) 2547-9301-15 www.orbilan.de info@orbilan.de • Marco Schwietering, Managing Director Detlev Noeldge, Managing Director

Plazit 2001 Kibbutz Gazit D.N. Yizreel, 19340 Israel (972) 4-66-28888 Fax: (972) 4-67-65784 www.plazit.com plazit@plazit.com • Alberto Tito Asher, Managing Director David Pampanel, Vice President Marketing

Praher Valves GmbH Poneggenstrasse 5 Schwertberg, A-4311 Austria (43) 7262-61179-0 Fax: (43) 7262-61203 www.praher-valves.com info@praher-valves.com • Winfried Praher, General Manager Irina Rosca, Managing Director

Praher Middle East FZE P.O. Box 122435 SATF Zone, UAE (971) 6-5579707 Fax: (971) 6-5579866 office.ae@praher.com Roman Sonnberger, Managing Director

Peraqua Professional Water Products GmbH Handelsstraße 8 St. Valentin, A-4300 Austria (43) 7435-58-488-0 Fax: (43) 7435-58-488-88 info@peraqua.com Wolfgang Irndorfer, Managing Director Winfried Praher, General Manager

Praher Canada Products Ltd. 101 Saunders Road Barrie, ON L4M 6E7 Canada (705) 725-1100 Fax: (705) 725-0444 canada@praher.com John Dirneder, Vice President Nolie Johnston

Praher Armatury Spol. S.R.O. Zdebradska 62 Jazlovice p. Ricany, CZ-251 01 Czech Republic (420) 323-637-673 Fax: (420) 323-637-672 office.cz@praher.com Pavel Pána, General Manager

Praher Armaturen GmbH Regensburger Ring 12 Roth, 91154 Germany (49) 9171-9677-0 Fax: (49) 9171-9677-88 office.de@praher.com Maik Kränz, Sales Manager Alexandra Maximini, Branch Manager

IBG - Praher bv Ambachtstraat 10 Oud-Alblas, 2969 AC Netherlands (31) 184-697214 Fax: (31) 184-697225 www.praher.com office.nl@praher-valves.com Winfried Praher, General Manager

Quadrant EPP — AG Hardstrasse 5 Lenzburg, CH-5600 Switzerland (41) 62-8858150 Fax: (41) 62-8858401 www.quadrantplastics.com contact@qplas.com • Luca Carabelli, Commercial Director Christoph Kleiner, President Europe Glen Steady, Chief Executive Officer

Quadrant EPP Belgium N.V. I.P. Noord - R. Tavernierlaan 2 Tielt, 8700 Belgium (32) 51-42-35-11 Fax: (32) 51-42-33-00 dirk.schmid@qplas.com Dirk Schmid, Area Sales Manager

Quadrant Plastic Composites Inc. 495 Laird Road Guelph, ON N1G 3M1 Canada (519) 837-1500 Fax: (519) 837-3770

Quadrant China Ltd. Sino Life Tower, Suite 1005 707 Zhang Yang Road Pu Dong, Shangai 200120 China (86) 21-5835-8918 Fax: (86) 21-5835-8133 www.quadrantepp.com contact@qplas.com

Quadrant EPP Deutschland GmbH Am Leitzelbach 11 Sinsheim, 74889 Germany (49) 7261-1550 Fax: (49) 7261 -155155

Quadrant PHS GmbH Weberstrasse 2 Vreden, 48691 Germany (49) 2564-3010 Fax: (49) 2564-301255 thomas.vennhoff@qplas.com Thomas Vennhoff, Area Sales Manager

Quadrant EPP — Asia Pacific Ltd. 60 Ha Mei San Tsuen Ping Shan, Yuen Long, N.T. Hong Kong (852) 2470-26-83 Fax: (852) 2478-99-66 asia.epp@qplas.com Wai Ying Ho, Commercial Director Asia Pacific

63• Denotes Key Voting Member

Quadrant Hungary — Teraglobus Kft. Leshegy u. 30 Szigetszentmiklos, 2310 Hungary (36) 24-887100 Fax: (36) 24-887101 laszlo.bartha@qplas.com Laszlo Bartha, Area Sales Manager Quadrant EPP India Surlon Ltd. 54/11 Site IV Industrial Area Sahibabad - Ghaziabad (U.P.), Pin Code No 201 010 India (91) 120-3294917 Fax: (91) 120-2895793

Quadrant EPP — Italia SRL Via Trento 39 20017 Passirana di RHO, Milan 20017 Italy (39) 02-93-26-131 Fax: (39) 02-93-50-8451 massimo.cozzi@qplas.com Massimo Cozzi, Area Sales Manager

Quadrant EPP Japan Ltd. Nisseki-Takanawa Building, 2nd Floor 2-18-10, Takanawa, Minato-Ku Tokyo, 108-0074 Japan (81) 3-3473-1372 Fax: (81) 3-3473-1267

Nippon Polypenco Ltd. 5-2, Marunouchi 2 - Chome Chiyoda-Ku, Tokyo 100-00005 Japan (81) 3-32834-267 Fax: (81) 3-32834-087 www.polypenco.co.jp

Quadrant Korea Co., Ltd. No. 303 The O-Valley 555-9, Hogye-Dong, Dongan-gu Anyang-si, Gyeonggi-do 431-763 Korea (82) 31-479-6677

Quadrant Engineering Plastic Products Mexico S.A. de C.V. KM. 1,5 Carr. Amomolulco-Ocoyoacac Barrio de Sta. Maria Ocoyoacac, Edo de Mexico 52740 Mexico (52) 1-728-282-9110 Fax: (52) 1-728-75317

Quadrant EPP Nederland BV Anthony Fokkerweg 2 PK Almelo, 7602 Netherlands (31) 546-87-7777 Fax: (31) 546-86-0796 dirk.schmid@qplas.com Dirk Schmid, Area Sales Manager

Quadrant EPP — Kaprolan Sp. zo.o. Ul. Dziegielowa 7 Poznan, 61-680 Poland (48) 61-825-7045 Fax: (48) 61-820-5751 kaprolan@kaprolan.pl Dariusz Kurlit, Area Sales Manager Quadrant EPP — South Africa Pty. Ltd. 25 Nickel Street, Technicon Roodepoort, 1725 South Africa (27) 11-760-3100 Fax: (27) 11-763-2811 polyrdpt@iafrica.co.za

Quadrant Poly Hi Solidur SA Ltd. P.O. Box 8273, 2 Covora Street Corner Jet Park Road Elandsfontein, Johannesburg 1406 South Africa (27) 11-397-4150 Fax: (27) 11-397-4715

Quadrant PHS UK Ltd. Woodhouse Road Todmorden, Lancashire, England O114 5 TP United Kingdom (44) 1706-811000 Fax: (44) 1706-817571 joe.norwood@qplas.com Joe Norwood, Area Sales Manager

Quadrant EPP USA, Inc. 2710 American Way Fort Wayne, IN 46889 USA (260) 479-4100 Fax: (260) 478-1074 bradley.seibt@qplas.com Bradley M. Seibt, Project Development Manager

Quinn Plastics Services Ltd. Derrylin County Fermanagh, N. Ireland BT92 9AU United Kingdom (44) 28-677-48866 Fax: (44) 28- 677-48029 www.quinn-plastics.com info@quinn-plastics.com • Peter Kelly, General Manager Diane Creevy, Commercial Manager Martin Tierney, Financial Controller

Quinn Plastics GmbH Gassnerallee 40 Mainz, D-55120 Germany (49) 6131-6310-39 Fax: (49) 6131-6311-44 www.quinn-plastics.com wilfried.bernard@quinn-plastics.com Wilfried Bernard, Business Director - Western Europe

Quinn Plastics Nischwitz GmbH Manfred-Von-Ardenne-Strasse 1 OT Nischwitz Thallwitz, D-04808 Germany (49) 3425-9853-00 Fax: (49) 3425-9854-04 des.kenny@quinn-plastics.com Des Kenny, Operations Manager - Germany

Quinn Plastics, Slovakia s.r.o M.R. Stefania 71 Zilina, 01039 Slovak Republic (421) 41707-1420 Fax: (421) 41707-1417 elo.striezenec@quinn-plastics.com Elo Striezenec, Regional Sales Manager - Central and Eastern Europe

Quinn Plastics S.A.U. Pol. Ind. La Ferrería Alimentació 6-12 Montcada i Reixac, Barcelona ES-08110 Spain (34) 93-575-1990 Fax: (34) 93-575-1249 agnes.sanchez@quinn-plastics.com Agnes Sanchez, Regional Sales Manager - Iberia Quinn Plastics Ltd. Unit B1 Gateway 28 Oddicroft Lane Industrial Estate Sutton in Ashfield, Nottingham NG17 5F9 United Kingdom (44) 2867-741-111 Fax: (44) 2867-741-8029 colin.double@quinn-group.com Colin Double, National Sales Manager - UK & Ireland

64 • Denotes Key Voting Member

Röchling Engineering Plastics KG Postfach 1249 Haren, D-49724 Röchlingstr. 1 Haren, 49733 Germany (49) 5934-701-0 Fax: (49) 5934-701-299 www.roechling.com info@roechling-plastics.com • Franz Lübbers, Director Sales and Marketing, Thermoplastic Semi-Finished Products Ludger Bartels, CEO Willy Bölscher, Director, Thermoplastic Machined Components Dr. Joachim Brunswicker, Chief Financial Officer Udo Engels, General Sales Manager Thermoplastic Semi-Finished Products Mario Frericks, General Manager, Marketing Uwe Kassens, Director Commercial Composites Wilhelm Korte-Dirxen, General Manager, Extrusion Dept

Röchling Leripa Papertech GmbH & Co. KG Röchlingstr. 1 Oepping, A-4151 Austria (43) 7289-4611-0 Fax: (43) 7289-4611-80 www.leripa.com robaproducts@leripa.com Ing. Rüdiger Keinberger, General Manager

Röchling Engineering Plastics KG Avenida EmilioChechinato Itupeva San Paulo, 4195 Brazil www.roechling.com robson.alberoni@roechling-plastics.com Robson Alberoni, General Manager

Röchling Engineering Plastics 21 Tideman Drive Orangeville, Ontario L9W 3K3 Canada (519) 941-5300 (519) 941-4489 www.roechling-plastics.us info@roechling-plastics.us Cletus O’Dell, Vice President of Finance

Röchling International (Shanghai) Co., Ltd. Singapore Office Suite 26/F Shanghai Times Square Office Tower 93 Huai Hai Zhong Road Shanghai, 200021 China (86) 21-5117-6360 Fax: (86) 21-5117-7963 www.roechling-asia.com ris@roechling-plastics.com.cn Yuen Kwang Wong, General Manager

Röchling Machined Components (Kunshan) - Co. Ltd. No. 238, Chenfeng Road Kunshan City Kunshan Jiangsu/PR, Jiangsu 215300 China (86) 512-55-132-199 Fax: (86) 512-55-132-183 www.rocehling.com hy.xu@roechling-kunshan.com Bernhard Zdrahal, General Manager

Röchling Machined Plastics, s.r.o. Planá Nad Lužnicí Planá Nad Lužnicí, 391 11 Czech Republic (420) 381-212-271 Fax: (420) 381-215-305 www.roechling-plastics.cz info@roechling-plastics.cz Jirí Malek, General Manager

Röchling Technické Plasty, S.R.O. Planá Nad Lužnicí Planá Nad Lužnicí, 391 11 Czech Republic (420) 381-200-271 Fax: (420) 381-200-283 www.roechling-plastics.cz info@roechling-plastics.cz Jirí Malek, General Manager

Röchling Meta-Plast A/S Tøjstrupvej 31 8961 Allingåbro, Denmark (45) 8648-1711 Fax: (45) 8648-1710 www.meta-plast.dk sales@meta-plast.dk Paul Busk-Jensen

Röchling Leripa Papertech LLC Tarrankuja 1 08500 Lohja, Finland (358) 19 357 991 Fax: (358) 19 383 939 www.leripa.com finland@leripa.com Rüdiger Keinberger, General Manager

Röchling Rimito Plast Oy Harjutie 12 Rusko, FIN-21290 Finland (358) 2 436-0100 Fax: (358) 2 436-0105 www.rimitoplast.fi rimito@rimitoplast.fi Risto Leimola, General Manager

Röchling Engineering Plastiques S.A.S. 2, Rue de Barcelone Décines Cedex, F-69153 France (33) 472-14-8960 Fax: (33) 472-377-1120 www.roechling.com roechling.decines@roechling-engineering.fr Jean-Paul Klecha, General Manager Röchling Engineering S.a.r.l. 8, Rue Andre Fruchard, B. P. 12 Maxeville, Laxou 54527 France (33) 383-342424 Fax: (33) 383-322318 roechling.maxeville@roechling-engineering.fr Pascal Monnier, General Manager

Röchling Permali Composites S.A. 8, Rue A. - Fruchard, B.P. 12 Maxeville, Laxou Cedex F-54527 France (33) 383-342424 Fax: (33) 383-322318 www.permali.com info@roechling-permali.fr Jean-Paul Klecha, General Manager

Röchling Hydroma GmbH Lemberger Str. 101 Ruppertsweiler, D-66957 Germany (49) 6395-9222-0 Fax: (49) 6395-8355 www.roechling-hydroma.com info@roechling-hydroma.com Willy Bölscher, General Manager Gerold Fatscher, Plant Manager

Röchling Engineering Plastics KG Mülheimer Strasse 26 Troisdorf, D-53840 Germany (49) 2241-4820-0 Fax: (49) 2241-4820-100 www.roechling.com info@roechling-plastics.com Franz Lübbers, Director of Sales and Marketing Ludger Vehring, Director of Production and Engineering

65• Denotes Key Voting Member

Röchling Engineering Plastics (India) Pvt. Ltd. 201, A-Wing, Leo Building (West), Mumbai 400 052 India (91) 22-4217 8787 Fax: (91) 22-4217 8700 www.roechling-india.com info@roechling-india.com Manoj Kumar, General Manager Röchling Machined Plastics Italia S.R.L. Via Maja 5 - Zona Industriale Arcisate (Varese), 21051 Italy (39) 0332-476011 Fax: (39) 0332-474112 www.roechling.it info@roechling.it Dr. Massimo Besozzi, General Manager

Röchling Engineering Plastics Italia s.r.l. Via Della Vigne 18 Venegono Inferiore (Varese), 21040 Italy (39) 0-331-869-417 Fax: (39) 0-331-869-410 www.roechling-plastics.it info.roechling@roechling-plastics.it Paola del Prete, General Manager

Röchling Meta-Plast LSEZ SIA Kapsedes Str. 2 LV-3402 Liepāja, Latvia (371) 6348-8539 Fax: (371) 6348-8540 www.meta-plast.dk letland@meta-plast.dk Dmitrijs Titovs, Branch Manager

Roechling Engineering Plastics (Russia) Ltd. Tambovskaya 12-43 St. Petersburg, 192007 Russia 7-812-320-9280 Fax: 7-812-320-9281 www.roechling-plastics.ru d.podryadov@roechling-plastics.ru Dmitri Podryadov, General Manager

Röchling Engineering Plastics Pte. Ltd. No. 14 Tuas Avenue 8 639229 Singapore (65) 6-863-1877 Fax: (65) 6-863-1766 www.roechling-asia.com rep@roechling.com.sg Yuen Kwang Wong, General Manager

Röchling Plásticos Téchicos S.A. Unipersonal Ctra. Villana, s/n. - Apartado 34 Bocairent (Valencia), E-46880 Spain (34) 962-350-165 Fax: (34) 962-351-025 www.roechling-plastics.es comercial@roechling-plastics.es Lucas Becerra, General Manager Röchling Formaterm AB Box 27 Malillavagen 13 Virserum, 57080 Sweden (46) 495-249-090 Fax: (46) 495-305-21 www.formaterm.se info@formaterm.se Gun-Britt Hagstrom, Financial Manager

Röchling Engineering Plastics (UK) Ltd. Waterwells Business Park GB-Gloucester, England GL2 4AA United Kingdom (44) 1452-727900 Fax: (44) 1452-728056 www.roechling-plastics.co.uk sales@roechling-plastics.co.uk Mike Knowles, General Manager

Röchling Engineering Plastics 2040 Carlos Avenue Ontario, CA 91761 USA (800) 545-5177 Fax: (909) 922-3280 www.roechling-plastics.us reo@roechling-plastics.us

Röchling Glastic Composites 4321 Glenridge Road Cleveland, OH 44121 USA (216) 486-0100 Fax: (216) 486-1091 www.roechling-glastic.com info@glastic.com Darren Keegan, General Manager

Röchling Machined Plastics 161 Westec Drive Mount Pleasant, PA 15666 USA (724) 696-5200 Fax: (724) 696-5300 www.roechling-plastics.us rmp@roechling.biz Bob Healy, General Manager

Röchling Leripa Papertech LLC 710 Ford Street Kimberly, WI 54136 USA (920) 954-9154 Fax: (920) 954-9156 www.leripa.com leripa.papertech@leripa.com Tim Brown, General Manager

Röchling Sustaplast KG Sustaplast-Str. 1 Lahnstein, 56112 Germany (49) 2621-693-0 Fax: (49) 2621-693-170 www.roechling.com info@sustaplast.de • Franz Lübbers, Director Sales and Marketing

Mustafa Altintas, Director Production and Engineering Ludger Bartels, CEO Friedbert Bollinger, General Manager, Sales Ludger Vehring, Director of Production and Engineering

Röchling Technische Kunststoffe KG Guerickestr. 5 Lützen, 06686 Germany (49) 34444-308-0 Fax: (49) 34444-308-10 www.roechling-luetzen.de kontakt@roechling-luetzen.de Klaus Trittmacher, General Manager

Röchling Sustaplast KG Formtecnick Lahnstr. 22 Nenterhausen, 56412 Germany (49) 6485-8890 Fax: (49) 6485-88919 www.roechling.com formtechnik@sustaplast.de Udo Willrich, Plant Manager

Bayerschmidt Kunstoffe GmbH Bayerschmidtweg 1 Roding, 93426 Germany (49) 9461-4026-0 Fax: (49) 9461-4026-200 www.bayerschmidt.de info@bayerschmidt.de Gerhard Bayerschmidt, General Manager

66

SIMONA AG P.O. Box 133 Teichweg 16 Kirn, D-55606 Germany (49) 6752-140 Fax: (49) 6752-14211 www.simona.de mail@simona.de • Eric Schönel, Marketing Director Markus Gotz, Sales Area Manager Central & Eastern Europe Giovanni Vesco, Sales Area Manager, Western Europe

Specchidea Srl Via Cav. Virginio Tedeschi 11 Settimo Torinese Torino, 10036 Italy (39) 011-223-8388 Fax: (39) 011-223-7933 www.specchidea.it specchidea@specchidea.it • Elio Giurintano, General Manager Rosanna Campanella, German Export Sonia De Bella, French Export and Italian Export

Wefapress® Beck & Co. GmbH Up de Hacke 21/31 Vreden, D-48691 Germany (49) 2564-9329-0 Fax: (49) 2564-9329-45 www.wefapress.com info@wefapress.com • Gerrit Beck, Managing Director Lutz Beck, Managing Director

Wefapress® France 30 Rue D’Alsace Florange, 57190 France (33) 638732187 Fax: (33) 382567494 folny@wefapress.com Christophe Folny, Branch Manager

Wefapress® South Africa P.O. Box 24027 Humewood, Port Elizabeth 6013 South Africa (27) 415-832-848 Fax: (27) 415-834-142 wildemann@wefapress.co.za Olaf Wildemann, Branch Manager

Zell-Metall GmbH Schulstrasse 16Kaprun, A-5710 Austria(43) 6547-8417 Fax: (43) 6547-8890www.zellamid.comzell-metall@zmk.at• Nick Kraguljac, Sales DirectorRudolf Klepsch, Executive ManagerErich Seidl, Manager Application DevelopmentHans Winterleitner, Sales Manager

EXPERTA SARL Rue Charles Coude Za La Porte De Ker Lan Bruz, 35170 France (33) 22-3462-581 Fax: (33) 22-3463-952 Bguillou.experta@wanadoo.fr Bernard Guillou

Zellmetall Vertriebsges.m.b.H. Gschwandnergasse 29 Wien, A-1170 Austria (43) 1486-2583-0 Fax: (43) 1485-1134-33 zmv@zellmetall.at Gerhard Hajny

Zell-Metall Croatia Torbarova 11 Zagreb, HR-1000 Croatia (385) 1-4663862 Fax: (385) 1-4663862 j.simunkovic@zmk.at Julio Simunkovic

NetShape SAS Z.I. le Pontet 19, rue Jules Ferry Saint Symphorien d’Ozon, 69360 France (33) 4-7889-1514 Fax: (33) 4-7893-3245 www.plasticsrendezvous.com sales@netshape.fr Patrick Chabert

Zell-Metall Spain C/Pedro Aleixandre 57-(26a) Valencia, E-46006 Spain (34) 678-713121 a.calandin@zmk.at Arturo Calandin

67

EPDA STAFF

Jackie Laurent European Account Services Coordinator PO Box 6248 Milton Keynes MK10 1XR United Kingdom +44.1296.728.686 Fax: +44.1296.728.202 jlaurent@epda.com

European Plastics Distributors Association

P.O. Box 6248 71 Main Street Milton Keynes MK10 1XR United Kingdom Tel: +44.1296.728.686 Fax: +44.1296.728.202 Email: epda@epda.comJackie Laurent

USA Offi ce

6734 W. 121st StreetOverland Park, KS 662091 (913) 345-1005 Fax: 1 (913) 345-1006www.iapd.org iapd@iapd.orgSusan E. Avery, CAE, Executive DirectorCrystal Roberts, Deputy Executive Director/Director of Business Development

David Blackhurst Sales Manager dblackhurst@epda.com Wess Hudelson Marketing and Education Manager whudelson@epda.com Jean McClure Administrative Assistant jmcclure@epda.com Liz Novak Managing Editor lnovak@epda.com

Kipp Simmons Accountant ksimmons@epda.com Ashley Stewart Meetings and Sales Coordinator astewart@epda.com Laurie Warren Meetings and Finance Manager lwarren@epda.com Devin Walker Director of Marketing and Communications dwalker@epda.com Randy Wilkins Member Services Coordinator rwilkins@epda.com

68

Notes