Table of content · 2019-09-11 · and your password. Confirm your password in the appropriate field. In this step, you are establishing the password that is required for any future

Modem Wireless Router

Table of content

1. Wireless modem router installation ..................... 2

1.1 Equipment ................................................. 2

1.2 Connecting wireless modem router ............... 2

1.3ConfiguringTCP/IPprotocol ......................... 3

1.4Configuringgateway ................................... 8

1.5Troubleshooting ........................................ 13

1.6Security .................................................. 14

2. ConfiguringYourMailbox ................................. 18

2.1ConfiguringOutlookExpress ...................... 18

2.2ConfiguringOutlook97.............................. 21

2.3ConfiguringOutlook2000/XP ..................... 24

2.4ConfiguringNetscape7.0 ........................... 27

2.5ConfiguringIncredimail ............................. 31

2.6ConfiguringWindowsMail6.0..................... 34

3. Contacting Us ................................................ 39

4. ImportantInformation .................................... 39

Hi-SpeedInternetUserGuide2

1.1 Equipment

VerifythatthefollowingitemscamewithyourDSLkit:

1.2 Connecting wireless modem router

*UseCrossovercablewhenconnectingtoahuborswitchwithoutan uplinkport.Thereisnosoftwareinstallationrequiredwhenusing anEthernetconnection.

1. Gigaset®Device2. Documentation3. Powersupply4. RJ-45Ethernet cable5. RJ-11DSLcable (notrequiredfor cableconnection)6. Linefilters(not requiredforcable connection)

Connection steps:

1. Deconnectthecable modempowersupply. Youcanreconnectitin only30minutes.2. ConnectyourPCinto the1,2or3Ethernetport onyourwirelessmodem router.3. Connecttheotherendto theEthernetporton yourcomputer.4. Plugthepoweradapter intothepoweroutlet andthewirelessmodem router(blackport).5. Ensurethatthewireless modem router is powered on.Thepowerswitchis ontherightsideofthe backpanel.

1 Wireless modem router installation

1 2

3

4 5 6

3Modem Wireless Router

1.3 ConfiguringTCP/IPprotocol

TheTCP/IPprotocolmustbeinstalled,asthisstepenablesyoutobeidentifiedontheInternet.Withoutthisinformation,youwillnotbeabletoaccesstheInternet.Itisthereforeimportantthatyoumakesurethatthedatayouenterisaccurate.Pleaserefertothe“ImportantInforma-tion”thatyouwrotedownonthelastpageofthisdocument.

BeforeconfiguringtheIPaddress,makesurethatthephysicalcompo-nentsareworkingproperly.Thenetworkinterfacecardneedstohavebeenconfiguredandthemodeminstalledinordertodothis.

Windows2000andXP:

1.ClickonStart>Settings>ControlPanel.

2.Double-clickon“NetworkandDial-upConnections”.

3.Right-clickonyour“LocalAreaConnection”.

ThenclickonProperties.


4.Inthe“Components”,select“InternetProtocol(TCP/IP)”, thenclickonProperties.

5.Yourhighspeedconnectiondoesn’tneedanyspecialconfiguration.-Select“ObtainanIPaddressautomatically”.-Select“ObtainDNSserveraddressautomatically”.

TheserverwillgiveoutthenecessaryIPaddressestoallowaccesstotheInternet.

-ClickonOK


Windows Vista:

1.ClickonStart()>ControlPanel.

2.SelectNetworkandSharingCenter.


3.Ontheleftmenu,selectManagenetworkconnections.

4.Right-clickonyour“LocalAreaConnection”.ThenclickonProperties.


5.IntheNetworkingtab,selectInternetProtocolVersion4(TCP/IPv4),thenclickonProperties.

6.Yourhighspeedconnectiondoesn’tneedanyspecialconfiguration. -Select“ObtainanIPaddressautomatically”. -Select“ObtainDNSserveraddressautomatically”.

TheserverwillgiveoutthenecessaryIPaddressestoallowaccesstotheInternet. -ClickonOK


1.4 Configuringgateway

Followthenextstepstomodifytheconfigurationofyourgateway:

1. StartupyourWebbrowserandtypethefollowingaddress:http://192.168.254.254

2.TheGateway Setup Wizard screen appears. ClickNext to proceed.

3. Typeyouruser name(theone Customer Service Departmentgaveyou) andyourpassword.

Confirmyour password in theappropriate field.Inthisstep, youareestablishing thepasswordthatis requiredforany futureaccesstothe Gateway’sconfigu- ration screen.

4. Selectthetime zoneofyourarea.


5. Defineyourwireless modemrouterconfigu- rationandclickNext.

Forsecuritymatters, you’llhavetorepeat thisinformation,

as required at section 1.6.

6.ClickFinish.

7.Thisscreendescribes theorganizationofthe Gateway’snetwork softwareandthe functionalityavailable. Youcanbrowse easilybetweenthese 3sectionsbyclicking ontheiconsatthetop ofthescreen.

ClickContinue.


8.Clickonthe HomeNetworkiconat theleftofthepage.

9.TheHomeNetwork screen will appears. ClicktheAdvanced Settingsbutton.

10.Clickthe Configurethe Local SpeedStream GatewayLAN/WAN Portlink.


11. Select WAN mode andclickApply.

12.SelecttheProtocol BridgeIP and clickNext.

13. Select UseDHCP andclickNext.


14.Selectthefollowing InterfaceOptions:

•UseFirewall •UseAttack DetectionSystem •UseUniversal

Plug-n-Play •NAPT(required)

AndclickNext.

15.Leavethedefault connection name or customize it and clickNext.

16.ClickFinish.

17.You’llbeautomati- callyredirectto theSpeedStream GatewayLAN/WAN Portscreen.Younow needtorebootyour Wireless modem router. Clickonthe word Reboot.


18.ClicktheRebootbutton. TheWirelessmodem routerwillbereinitializing during 45 seconds.

Connectyourcable modemEthernetport totheWirelessmodem router # 4 port.

RebootyourWireless modemrouterafter 30seconds.

1.5 Troubleshooting

Hereisatablethatwillhelpyoutounderstandtheindicatoronyourgateway.

LED Off Green Blinking Green

Blinking Red/Green

Red

Power Powerisoff Powerison Flashwrite in progress

nPOSTin progress nPOSTerror occured(if persitent)

Ether-net 1-4

nPowernot appliednNolink

Normal operation.Linkokay

Usertrafficflowingineitherdirection

Wireless nPowernot appliednNolink

Normal operation.Linkokay

Wireless usertrafficflowingineitherdirection

Cable nPowernot applied nNoLANdata activity

Wireless modem router is connected to cablemodem

Steadyblinkingcablelineis attemp-ing to train

Internet nPowernot applied nNoLAN dataactivity

nDSLlinkand WANinterface are upnWANinterface hasIPaddress

Activity nPowernot appliednNoWANor LANactivity

LANusertrafficflowingineitherdirection.


1.6 Security

Inordertoprotectyourcomputersystemsfromunauthorizedaccess, CablevisionstronglyrecommendsenablingWPA-TKIPencryptionwithapasswordonyourwirelessnetwork,nomorethan30charactersinlength.ThissecuritymodeiscompatiblewithWindowsXPorsubsequentoperationsystems.Ifyoudonotplanonusingthewirelessnetwork,thenwe recommenddisablingthewirelessadapterontherouter.Enabling the wirelessadapterwithoutwirelesssecurityfeaturesturnedoncouldpotentiallyexposeyoursystemstodatatheft,viruses,spywareandother unauthorized access.

Configurethewirelessnetworkusingthisoption.ThewirelesssettingsontheGatewaymustmatchthoseofanywirelessclientsonyournetwork.

Toconfigurethewirelessnetwork:

1.ClicktheConfiguretheLocalSpeedStreamGatewayWireless Network hyperlink.Thisdisplaysthe“WirelessSummary”window.


2.ClickBegin Wireless Wizard.Thisdisplaysthe“WirelessSetup Configuration”window.

3. Select Enable toenabletheWirelessInterface. 4.TypeyourwirelessnetworkIDinSSID(Example:cablevision).

5.Optionally,selectachannelIDfromtheChannel drop-down menu and clickonEnableAutoScanonPowerON.Thisstepisoptionalbutisstronglyrecommendedifyouexperienceinterferenceorifyouliveinaheavilypopulatedarea(example:downtownornearanofficebuilding).Thisway,ifthereisinterference,yourmodemwillchooseanotherchannel.

6.ClickNext. 7.SelectWPA-TKIPfromtheSecurityModedrop-downmenu,

asrecommendbyCablevision.

WirelessSetupWPA-TKIPOptionTousetheWPA-TKIPoption:

1.Fromthe“WirelessSecurityConfiguration”window,selectWPA-TKIPfromtheSecurityModedrop-downmenu.IfyoucheckEnableSSIDBroadcast,thedetectionofyourinternetsignalwillbeeasierfor non-authorizedusers,thereforeitisrecommendedyounotactivate thebroadcast.

2.ClickNext.Thisdisplaysthe“WirelessWPAConfiguration”window.


3.Createasecretpasswordwithnomorethan30characters.This passwordneedstobedifficulttofindforanexternaluser,buteasytotypeforyou.

4.KeepGroupKeyRenewalat3600 seconds.

5.ClickNext.Thisdisplaysthe“WirelessFilterConfiguration”window. WirelessFilterandOptionsConfiguration

ControlaccesstotheGatewayofwirelessdevicesbasedontheMACaddressofthedeviceusingthe“WirelessFilterConfiguration”window.AMAC(MediaAccessControl)addressreferstoahardwareaddressthatuniquelyidentifieseachdeviceofanetwork.RefertotheuserdocumentationforeachdeviceyouwishtodenyorallowaccessforaparticularMACaddress.

Toconfigurethewirelessfilter:

1.SelectoneofthefollowingWireless Filteroptions: • Enable Enablewirelessfiltering. • Disable Disablewirelessfiltering.Ifwirelessfilteringisdisabled,

alldeviceshaveaccesstotheGateway.

2.Ifwirelessfilteringisenabled,selectoneofthefollowingFilterMode

options: • Allow PermitsaccesstoalltheMACaddressesenteredinthetable. • DenyRestrictsGatewayaccesstoalltheMACaddressesenteredin

thetable.


3.TypetheMACaddressintheMACAddresscolumnnexttoeachdeviceyoueitherwanttopermitorrestrictaccess.

4.ClickNext.Thisdisplaysthe“WirelessOptionsConfiguration”window.

5.Optionally,configurethefollowingitems: • Data Transfer RateIfaparticularwirelessclientisunableto

auto-negotiateaconnectiontotheGateway,thedatatransferrate maybesettoaspecificdataratesuchas11Mbpsfor802.11b wireless clients.

• RTS/CTSThresholdAgroupofwirelessclientsmayexperience difficultycommunicatingwiththeGatewaywithoutinterruptingeach other’scommunications.Ifthisoccurs,theRTS/CTSthresholdmay besettoahighernumbertoallowthemeachalongerperiodinwhich tocommunicatewiththeGatewaybeforethepriorityisswitchedto anotherwirelessclientwishingtotransmitdata.

• Fragmentation Threshold Thefragmentationthresholdmaybe loweredtoimprovereliabilityinanexcessively“noisy”wireless environmentifchangingchannelsdoesnotprovidesignificantenough

improvement.

Ifyouwishtoresettheoptionsinthe“WirelessOptionsConfiguration”win-dow,clickRestore Default Values.Thesystemrespondsbyrestoringalltheadvancedfeaturesonthispage.

6.ClickNext.Thisdisplaysthe“WirelessWizard”finishwindow.

7.ClickFinishtosavethesettings.

8.ClickReboot foryourwirelessconfigurationtotakeeffect.


Thissectionguidesyouthroughthevariousstepsforsettingupyourmailbox.

2.1 ConfiguringOutlookExpress

Anewemailaddresshasbeencreatedforyou.Hereishowtocreateyourmailbox,sothatyouareabletouseyournewemailaddress.

1. ClickonStart>Programs>OutlookExpress.

2. ClickonTools>Accounts.

2 Configuringyourmailbox


3. ClickontheMailtab>Add>Mail.

4.Enteryourwholename.Thisnamewillappearintheemailsyousend.

5.Enteryouremailaddress.TheonethattheCustomerService

Departmentgaveyou.


6.Inthiswindow: -SelectyourincomingmailservertypePOP3. -Typeyourincomingmailserver:pop3.cablevision.qc.ca -Typeyouroutgoingmailserver:smtp.cablevision.qc.ca ThenclickonNext.

7.Inthiswindow: -Typeyourusername.Example:c1xxxxxx -Typeyourpassword. -Youcanalsoclick“Rememberpassword”. ThenclickonNext.

8. ClickonFinish.


2.2 ConfiguringOutlook97


1.OpenOutlook97,clickTools>Services.

2.ClickonAdd.


3.Select“InternetE-mail”,thenclickonOK.

4. IntheGeneraltab:

-Enterthenameoftheaccount.That’showyouraccountisnamed. -Enteryourname.Thisnamewillappearintheemailsyousend. -Enteryouremailaddress.TheonetheCustomerServiceDepartment gaveyou.


5.ClickontheServerstab: -Entertheincomingmailserver:pop3.cablevision.qc.ca -Entertheoutgoingmailserver:smtp.cablevision.qc.ca -Enteryouraccountname.Example:c1xxxxxx -Enteryourpassword.

6.ClickontheAdvancedtab: -Confirmtheoutgoingmailport:25 -Confirmtheincomingmailport:110 -Ifyouchecktheoption“Leaveacopyofmessagesonserver”,you

alsoneedtochecktheoption“Removefromserverafter”.Thisway, theserverwillalwayshavearespectableamountofspaceavailable.

-ClickonOK

Youraccounthasnowbeencreated.


2.3 ConfiguringOutlook2000/XP


1.OpenOutlook2000/XP,clickTools>Services.

2.ClickonAdd.


3. Select“InternetE-mail”,thenclickonOK.

4. IntheGeneraltab: -Enterthenameoftheaccount.That’showyouraccountisnamed. -Enteryourname.Thisnamewillappearintheemailsyousend. -Enteryouremailaddress.TheonetheCustomerServiceDepartment gaveyou.


5.ClickontheServerstab: -Entertheincomingmailserver:pop3.cablevision.qc.ca -Entertheoutgoingmailserver:smtp.cablevision.qc.ca -Enteryouraccountname.Example:c1xxxxxx -Enteryourpassword.

6.ClickontheAdvancedtab: -Confirmtheoutgoingmailport:25 -Confirmtheincomingmailport:110 -Ifyouchecktheoption“Leaveacopyofmessagesonserver”, youalsoneedtochecktheoption“Removefromserverafter”.Thisway, theserverwillalwayshavearespectableamountofspaceavailable.

-ClickonOk.Youremailaccounthasbeensetup.


2.4 ConfiguringNetscape7.0


1.OpenNetscapeMail7.ThenclickonEdit>Mail&NewsgroupAccountSettings...

2.ClickonAddAccount...


3.Select“Emailaccount”,thenclickonNext.

4.Inthiswindow: -Enteryouname.Thisnamewillappearintheemailsyousend. -Enteryouremailaddress.TheonetheCustomerServiceDepartment

gaveyou.

ThenclickonNext.


5.Enterthenameofyourincomingmailserver:pop3.cablevision.qc.ca Theoutgoingmailserverwillbeverifiedattheend.

ThenclickonNext.

6.Enteryourusername.Example:c1xxxxxx

ThenclickonNext.


7.Enteryouremailaddress.TheonetheCustomerServiceDepartmentgaveyou.

ThenclickonNext.

8.Here’sasummaryoftheaccountyouhavecreated.ClickFinish.


9.Aftercreatingtheaccount,clickonOutgoingServer(SMTP)

-Confirmyouroutgoingserver:smtp.cablevision.qc.ca -ConfirmtheoutgoingserverPort:25 -Deletewhatisinthe“UserName”field.Theoutgoingmailserverdoes notneedthisinformation. -ClickonOK.

Thereyougo.Youhavejustaddedyouremailaccount.

2.5 ConfiguringIncredimail

Hereishowtocreateanemailboxsothatyouareabletouseyournew email address.

1.OpenIncredimail.ThenclickonTools>Accounts.


2.ClickonAdd.

3.Selecttheoption“Letmeconfiguresettingsmyself”.ThenclickNext.

4.Inthiswindow:

-Enteryourname.Thisnamewillappearintheemailsyousend. -Enteryouremailaddress.TheonetheCustomerServiceDepartment gaveyou.

ThenclickonNext.


5.Inthiswindow:

-SelectPOP3asyourincomingmailservertype. -Enteryourincomingmailserver:pop3.cablevision.qc.ca -Enteryouroutgoingmailserver:smtp.cablevision.qc.ca

ThenclickonNext.

6.Inthiswindow:

-Enteryourusername.Example:c1xxxxxx -Enteryourpassword.

ThenclickonFinish.


7.Thereyougo.Youhavejustaddedyouremailaccount.

2.6 ConfiguringWindowsMail6.0

1.ClickonStart(),thenclickonE-mailWindowsMail.


2. ClickonTools>Accounts.

3. ClickonAdd…


4.SelectE-mailAccount,thenclickonNext.

5.Inthiswindow: -Enteryourwholename.Thisnamewillappearintheemailsyousend. -ClickonNext.


6.Inthiswindow: -Enteryouremailaddress.TheonetheCustomerServiceDepartment gaveyou. -ClickonNext.

7.Inthiswindow: -SelectPOP3asyourincomingmailservertype. -Enteryourincomingmailserver:pop3.cablevision.qc.ca -Enteryouroutgoingmailserver:smtp.cablevision.qc.ca -ThenclickonNext.


8.Inthiswindow: -Enteryourusername.Example:c1xxxxxx -Enteryourpassword -Youcanalsocheck‘’Rememberpassword’’

9.ClickonFinish.

10.ClickonClose.


Wasthisguidenotabletoanswersomeofyourquestions?

CallourTechnicalSupportserviceat1800567-6353.

Domain name:cablevision.qc.ca

Outcomingmailserver(SMTP):smtp.cablevision.qc.ca

Incomingmailserver(POP3):pop3.cablevision.qc.ca

User name:

Password:

Email address:

Siemens wireless modem router parameters

Password(modemrouter):

SSID:

Encryptionkey:

Youhavetheresponsibilitytopreservethisinformationforlateruseinasecured place.

Formoreinformation,callourTechnicalSupportserviceat1800567-6353.

3 Contacting Us

4 ImportantInformation

Hi-SpeedInternetUserGuide

NOTES

Documents

Table of content · 2019-09-11 · and your password. Confirm your password in the appropriate field. In this step, you are establishing the password that is required for any future