T September Page of 2 - Perth Hobby Centre coming... · Japan Motocross Championship, including Honda’s unique Pro-Link monoshock suspension that provided the ... success with 3

Coming Soon!T September Page 1 of 24

12052 1/12 Team Lotus Type 49 1967 (w/Photo-Etched Parts) Availability: January, 2015 Quantity per Carton: 6pcs.

Assembly Kit

Tamiya is delighted to announce the release of this classic, with new photo-etched parts and detail-boosting extras for the first time. The original kit was first released in 1973, and most recently in 1991. The Type 49 made its debut in 1967. Another ground-breaking piece of racing car engineering from Team Lotus, an innovative structural design attached the Cosworth DFV engine directly to the rear bulkhead as a stressed member. Thus, the DFV became an active element of the chassis which transmitted forces. This idea from famed designer Colin Chapman of Team Lotus reinvigorated his team, as the Type 49 roared to victory in the 1967 Dutch Grand Prix, its maiden Formula One race. 3 further wins followed that season as the car was piloted by the famed duo of Jim Clark and Graham Hill, and next year 5 more victories were added. The Type 49 contributed to 2 Constructors' titles before it was retired in 1970.

About the Model• This is a 1/12 scale plastic model assembly kit. Length: 360mm.• The sleek form of the Type 49 is accurately captured, with a faithful reproduction of the Cosworth DFV

engine with pipes and wiring. The model also features moving suspension.• Nose cowling can be removed after assembly to allow inspection of the internal mechanisms.• New photo-etched parts are included to depict brake discs, radiator mesh, seatbelt parts and more. Air

funnels are also authentically recreated using new aluminum parts. • High-quality Cartograf decals are included to recreate cars from the 1967 Dutch and Belgian GPs. Please

note that sponsor logos are not included.• Driver figure included to add further realism.• Revised assembly instruction manual features a newly-revised car's background text in 4 languages.

Above left: Image shows actual carAbove right: Air funnel parts

Below right: photo-etched parts

All images show prototypes

Coming Soon! September, 2014 Page 2 of 24

14011 1/12 Honda CR250R Motocrosser Availability: January, 2015 Quantity per Carton: 36pcs.

Assembly Kit

The 1/12 Scale Motorcycle Series receives a boost with the re-release of this classic item that first went on sale back in 1982. The model depicts the 1981 version of the Honda CR250R, a revolutionary bike that broke new ground for the Japanese giant as it was their first production model in the 250cc class to use a liquid cooled engine. In fact, it inherited much of its design from the RC250M, which was champion in the 1980 All Japan Motocross Championship, including Honda’s unique Pro-Link monoshock suspension that provided the progressive damping necessary on testing motocross surfaces.

About the model• This is a 1/12 scale plastic model assembly kit of the Honda CR250R motocrosser.• Length: 180mm, width: 72mm, height: 104mm.• The liquid-cooled 2-stroke engine is recreated in excellent detail, and includes vinyl tubing to depict cables

and lines.• The accurately depicted Honda Pro-Link rear suspension utilizes a metal coil spring.• Synthetic rubber tires have authentic knobby tread patterns.• Decals are included to depict manufacturer markings, plus number plate patterns used on bikes in different

motocross races.• Includes a newly-revised 4-language background text detailing the motorcycle history.

Image shows original Item 14011

RE-ISSUE


14013 1/12 Suzuki RM250 Motocrosser Availability: January, 2015 Quantity per Carton: 36pcs.

Assembly Kit

This is a re-release of the Suzuki RM250, which also originally went on sale back in 1982. By 1982, Suzuki had already built up a long history of competing in the Motocross World Championship, and enjoyed tremendous success with 3 back-to-back 250cc titles from 1970 and 10-in-a-row in the smaller 125cc class from 1975. They also had a long-standing tradition of releasing their championship bikes as production models, and the 1982 version of the RM250 continued in that vein. With Suzuki’s maiden 250cc-class liquid cooled engine providing 43hp, weighing in at a mere 97kg, and employing the Japanese company’s original “full floater” suspension, Suzuki was onto a winner and the bike sold well in countries across the world.

About the model• This is a 1/12 scale plastic model assembly kit of the Suzuki RM250R motocrosser.• Length: 179mm, width: 74mm, height: 106mm.• The liquid-cooled 2-stroke engine is recreated in excellent detail, and includes vinyl tubing to depict cables

and lines.• Accurately depicted Suzuki "full floater" rear suspension with metal coil spring.• Synthetic rubber tires have authentic knobby tread patterns.• Decals are included to depict manufacturer markings, plus number plate patterns used on bikes in different

motocross races.• Stand parts are included to display the model.• Includes a newly-revised 4-language background text detailing the motorcycle history.


RE-ISSUE


14018 1/12 Honda CR450R Motocrosser w/Rider Availability: January, 2015 Quantity per Carton: 36pcs.

Assembly Kit

Tamiya is delighted to announce this re-release of the 1983 model of the Honda CR450R. It depicts the 1981 variant of the CR450R which Honda released to compete in 500cc class motocross races. The single cylinder 431cc air-cooled 2-stroke engine at the time had the highest output on offer among Honda production motocross models at 51.5hp, plus a semi-double cradle frame using Honda’s unique Pro-Link rear suspension. With a dry weight of just 104kg, the lightweight CR450R was used by many 500cc motocross racers across the world. Later, the 1983 variant received a 472cc engine and evolved into the CR480R.

About the Model• This is a 1/12 scale plastic model assembly kit.• Length: 177mm, width: 77m, height: 102mm. • The tall, slimline form of Honda's powerful motocross bike is masterfully captured.• Cooling fins on the air-cooled engine are faithfully reproduced.• Honda’s Pro-Link rear suspension is accurately recreated, and employs a metal spring. • Synthetic rubber tires employ a realistic block pattern. • Decals are included to depict manufacturer markings, plus number plate patterns used on bikes in different

motocross races.• Comes with a motocross rider figure in jump pose. Bike can be depicted in mid-air using the included stand.• Includes a newly-revised 4-language background text detailing the motorcycle history.

RE-ISSUE



24335 1/24 Nissan Skyline 2000 GT-R Street-Custom Availability: November, 2014Quantity per Carton: 36pcs.

Assembly Kit

The 4-door sedan Skyline 2000 GT-R and its 2-door hard top counterpart were released to great acclaim in 1969 and 1970 respectively. Such an excited reception was little wonder, as the car utilized a detuned R380 (concept car) engine to rack up 50 Japanese race wins and earn it a place in the pantheon of legendary Japanese cars. Now, the Skyline 2000 GT-R 2-door hard top model gets a welcome re-release (original Item no. 24194) in 1/24 scale with parts depicting typical customizations of the car from its heyday: a "street custom" version.

About the Model• This is a 1/24 scale plastic model assembly kit.• The model accurately captures the classic form of the Skyline 2000 GT-R.• Parts are included to depict RS Watanabe 8-spoke wheels, front spoiler. • Comes with photo-etched parts recreating seatbelt buckles and strut tower brace.• The bonnet opens to allow appreciation of the accurate DOHC S20 straight-6 engine recreation with metal

parts to recreate air funnels.• Metal-plated parts recreate front grille, front/rear bumpers, door handles, windshield wipers and mirrors.

Image shows prototype


24336 1/24 Subaru BRZ Street-Custom Availability: January, 2015 Quantity per Carton: 24pcs.

Assembly Kit

This kit recreates the Subaru BRZ with customizing parts fitted to the car. The BRZ, of course, is a high-powered front engine rear-wheel drive sports car with tuned front strut and rear double wishbone suspension. In keeping with its sporty profile, the BRZ is frequently customized by its owners, and one of the main sources of customizing parts is Subaru Tecnica International (STI) - a company in the same group as Subaru. They offer a wide range of parts to tune different areas of the car. Now, newly-designed parts are included in this kit to depict such customizations.

About the model• This is a 1/24 scale plastic model assembly kit. Length: 178mm, width: 84mm. • The sporty form of the BRZ is captured faithfully by the model. It includes realistic depictions of the 2-liter

boxer engine, suspension, interior and more!• New parts depict front lip under spoiler, plus rear and side under spoilers at the base of the body.• Also comes with newly-designed parts recreating "shark-fin" antenna, gurney flap on the wing, sport

exhaust, flexible tower bar, 17-inch aluminum wheels and battery holder.• Decals feature a newly-designed body-center stripe in a choice of white or black.• Metal transfers and masking stickers are included.• Why not use in conjunction with the simultaneously-released Item 12658, which recreates customizing

carbon-fiber effect parts for the BRZ?

See the next page for a closer introduction of the customized parts.



SO, WHAT'S BEEN CUSTOMIZED?The images below give a brief introduction of the customizations depicted by the parts in this kit.*STI = Subaru Tecnica International parts

1

23

456

7

8

9

1 STI front lip under spoiler 2 STI side under spoiler 3 STI rear side under spoiler

4 5 6 7

8 9

STI gurney flap STI flexible tower bar &battery holder

STI sports exhaust

STI 17-inch aluminum wheels Shark fin antenna

continued from previous page...


Assembly Kit

32580 1/48 German 6x4 Towing Truck Kfz.69 with 3.7cm Pak Availability: December, 2014 Quantity per Carton: 36pcs.

In the lead-up toWWII,Germanystarted to transformcivilianvehicles intomilitaryones,andoneof thesubjectswasalight6-wheeltruckwhichwasmass-producedstartingin1933.This1936evolutionofthetruckhada60hpflatfoursquarecylinderenginethatmustered55hpandprovidedupto70km/h.Thetrucksawusetransportingpersonnelandlightartillery,andutilized6x4independentsuspensionwithrear4-wheeldrive.Thefirstmass-producedvariantwastheKfz.69,whichwasdesignedtotowa3.7cmPak35/36anti-tankgunandcarriedadriverand5artillerycrew.Itwasemployedasstandardequipmentinanti-tankartillerydivisionsandwas saw action in locations such as France, Poland, the Balkans, and Russia.

About the Model• Thisisa1/48scaleplasticmodelassemblykit.• ThemodelaccuratelyrecreatestheformoftheKfz.69withslopingenginehoodandrear-mountedammo

cases.• Thenewly-designedrecreationofthe3.7cmPakguncanbeassembledtodepicttheweaponbeingtowedby

theKfz.69,orbeingfired.• Anumberofaccessoriesareincludedtodepictaccessoriessuchasthejackandsoldiers'rifles.• Comeswith2markingoptionsand6realisticfigures.

Imageshowsprototype

Coming Soon!T September, 2014 Page 9 of 24

T

32581 1/48 British Armored Scout Car "Dingo" Mk.II Availability: December, 2014 Quantity per Carton: 36pcs.J

Assembly Kit

The latest addition to the popular 1/48 Military Miniature Series recreates the versatile British armored scout car “Dingo” Mk.II. Production of the Mk.I evolution of the vehicle began in 1939, around a year after the vehicle was first commissioned by British authorities. It came in at a compact 3.17m in length and 1.7m wide, was ably cushioned by wishbone suspension with coil springs, and thanks to 4-wheel steering with a preselector gearbox it was a highly mobile machine. However, the 4-wheel steering proved somewhat difficult in many hands, and it was phased out in favor of front-wheel steering on the 1941 Mk.II variant. Around 5,000 Mk.II scout cars would be produced between then and 1944, serving in Africa, Italy and even the Normandy landings. Excellent in its own right as a stand-alone model, this piece will also be of great interest to those creating dioramas, particularly those centered around British vehicles.

About the Model• This is a 1/48 scale plastic model assembly kit.• Length: 69mm. The model accurately captures the flat-panelled form of the scout car with intuitive parts

breakdown, giving modelers the option of assembling the folding roof in deployed or closed position.• Comes with 1 marking option included in the kit, allowing depiction of Western Front unit vehicle.• Includes 2 figures, which recreate a driver and commander.• With this year representing the 70th anniversary of the D-Day operations, now is a great time to get your

hands on a British Army classic. Combine it with other 1/48 British vehicle models such as Items 32582, 32562, 32546 and more!



30058 1/35 French Battle Tank B1 bis (w/Single Motor) Availability: December, 2014 Quantity per Carton: 12pcs.

Motorized Model

Hot on the heels of the acclaimed motorized model of the British Mk.IV Male tank, Tamiya is delighted to announce that the 1/35 Motorized Tank Series will be boosted by the release of the French B1 bis as a motorized model, allowing you to experience the excitement of seeing this detailed Tamiya kit in motion! Upon the outbreak of WWII, B1 bis tanks stood in the way of German armies determined to strike a crushing blow against France on her own soil. The B1 bis entered production in 1937 and was an upgraded version of the original 1920s-designed Char B1. The rivet-joined hull mounted a short-barreled 75mm howitzer, while a small, one-man turret carried a longer-barreled 47mm tank gun. The B1 bis was one of the most heavily armored tanks of its time, with plating that was 60mm thick in places, amply capable of defending it against anti-tank fire such as that from 37mm Pak guns. It could more than hold its own against individual German tanks, and was greatly feared by enemy soldiers who encountered it. The B1 bis also featured in the Battle of the Bulge, the 70th anniversary of which occurs this year.

See the next page for more information about the model!



GET UP CLOSE WITH THE LATEST 1/35 MOTORIZED MODEL!

About the Model• This is a 1/35 scale plastic assembly model kit. Length: 192mm• Realistically depicts the tank's tall profile, 75mm gun and side armor panels covering suspension mechanism.• Hull parts are made using slide molding and feature accurately depicted hex bolts.• Single motor gearbox enables forward movement and is pre-assembled to save time on construction.

Durable sprockets transmit the motor's power.• Realistic link type assembly tracks handle the movement of the model, and also offer easy assembly.• Commander's and driver's periscopes are moveable, as is the 75mm main gun.• Choice of two types of fenders and exhausts.• Includes one tank commander figure.• 4 marking options and a color painting guide are included in the kit.• Two LR03/AAA/UM4 batteries are separately required.


The kit includes a pre-assembled gearbox unit and motor to allow you to unleash the B1 bis and see it in motion!

Realistic snap-together type assembly tracks enable movement of the model. They come pre-removed from the sprue for ease of assembly.

Power from the motor is transferred smoothly and efficiently by sprocket wheels at the front of the model, mirroring the system on the actual B1 bis.

This highly accurate model is given an additional touch of realism with accessories such as the metal chain on the rear.


Assembly Kit

35338 1/35 Toyota Model AB Phaeton Availability: December, 2014 Quantity per Carton: 36pcs.

Thelatestadditiontothe1/35scaleMilitaryMiniatureseriesdepicts theToyotaABphaeton,avehiclefirstproducedin1936andwhichwaspartof thelinestartedbythefamedJapanesemaker’sfirstmass-producedcar: theAA.TheABsharedmuchof itsdesignwiththeAA,suchas the3.4-liter inline-6engineandbodylinesinfluencedheavilybyU.S.roadcars.WhereitdifferedfromtheAA,however,wasinitsfoldingclothroof,movablefrontwindscreenandfront-hingeddoors.Infact,withwarbreakingoutsosoonafteritsinitialproduction,thevastmajorityofABsneverinfactmadeitintoprivateowners’handsbutwererathersentformilitary use; painted in khaki, they were often used as staff cars. 353 Toyota ABs were manufactured up until theendofWWII.

About the Model• This is a 1/35 scale plastic model assembly kit. • Length:139mm,width:50mm,height:53mm• The form of the AB is captured in all its classic style, with rounded front grille and fenders. • Modelers can choose to depict the roof in deployed or retracted position.• Interiorpartssuchasseats,floorpanels,ladderframe,engineundersideandmoreofferarealisticfinish.• Auxiliary seats can be assembled in folded out or stowed position.• Comeswith1driverfigure.

Illustrationshowsactualvehicle


35340 1/35 German Jagdpanzer IV /70(V) Lang Availability: January, 2015 Quantity per Carton: 24pcs.

Assembly Kit

The latest addition to the 1/35 Military Miniatures series is this entirely newly-designed kit of the fearsome German tank destroyer Jagdpanzer IV Lang. The original Jagdpanzer IV tank destroyer was based upon the Panzer IV vehicle and used extensive sloped armor with the 48-caliber 7.5cm gun that had already proven its worth on other vehicles. In January 1944, it was decided to upgrade the Jagdpanzer IV, with the powerful 70-caliber 7.5cm anti-tank gun installed in place of the original 48-caliber weapon. This bigger gun was fitted to the Jadgpanzer IV with the intention of giving it the ability to destroy Allied tanks without even entering their weapons range. It was also the origin of the name Lang, which translates into English as "long". The (V) was applied to vehicles manufactured by the German company Vomag. 930 Jagdpanzer IV /70(V) Lang vehicles were manufactured between August 1944 and March 1945, with German forces taking advantage of the exceptional range of the gun, employing it in both defensive and ambush roles even as their military situation worsened. With this December also marking 70 years since the Battle of the Bulge, which was effectively the final German offensive of WWII, this model is right on time to liven up your late Second World War dioramas.

See the next page for more detailed information!

Image shows prototype CAD data


TAKE A LONG LOOK AT THE DETAILS!

DETAIL-UP PARTS ALSO RELEASED!

Images show prototype CAD data


About the Model• This is a 1/35 scale plastic model assembly kit.• The model excellently captures the low, enclosed form of the Lang with wedge-shaped hull front armor. It

depicts a vehicle manufactured after September 1944, when the use of anti-magnetic mine Zimmerit coating was discontinued.

• The long and imposing 70-caliber 7.5cm gun main barrel is molded in a single piece.• Comes with 2 torso figures which can be attached in the fighting compartment hatches.• Includes 3 marking options to depict Western (including Battle of the Bulge) and Eastern Front vehicles.• Item 12660, a metal gun barrel designed for this model, also goes on sale simultaneously. Combine it with

this kit for an even more realistic finish to the model.

Detailed depictions of different surface textures such as cast-iron mantlet and welded sections.

1

2

1

Excellent detail on the rear, with realistic recreations of exhausts, spare tracks, and a plethora of accessories.

2

3 4 3

4

Belt-type tracks depict the lightweight caterpillars used on late production versions of the Lang.

Detailed replications of the suspension. Front two rubber ring-less road wheels are faithfully depicted.

Tamiya is pleased to announce the simultaneous sale of Detail Up Parts for this model, in the shape of Item 12660 1/35 Scale German Jagdpanzer IV /70(V) Lang Metal Gun Barrel Set. See 12660's item page in this guide for more details.


35341 1/35 Japanese Army Figure Set Availability: January, 2015 Quantity per Carton: 80pcs.

Assembly Kit

Nearly 40 years since Tamiya last released WW2 Japanese soldier figures, we are pleased to tentatively confirm the retail of this set of figures depicting Japanese army officers and infantrymen. Parts are included to recreate soldier accessories and surrounding items for a highly realistic set that will add to any WWII Japanese diorama.

About the Set• Includes 4 figures depicting 2 officers seated at a table and 2 standing infantrymen, all in realistic pose and

wearing the Type 98 uniform first introduced by the Japanese army in 1938.• A range of accessories such as the Army issue katana sword are recreated in fine detail.• Also comes with parts to depict barrels, storage boxes and Japanese-style hot water bottles.• Rank insignia decals are included.

Images show early prototypes. Final product may differ.


Image shows actual aircraft

60325 1/32 Vought F4U-1A Corsair® Availability: January, 2015 Quantity per Carton: 6pcs.

Assembly Kit

Tamiya is delighted to announce this highly detailed model recreating the F4U-1A variant of last year’s highly popular Corsair model. Newly-designed parts are included in the kit to accurately capture the modifications which distinguish it from the original F4U-1. The F4U-1A drew on the experience of Navy and US Marine Corps pilots’ experience with the original aircraft, making modifications to further improve the performance of this legendary bird. One of the most noticeable alterations was the discarding of the “birdcage” cockpit and its extensive frame sections that hampered visibility; a semi-bubble canopy with minimal frame was installed instead, which improved the pilot’s view and made it easier to land the F4U-1A. Additional upgrades included raising the pilot’s seat 18cm to help with visibility, and later extending tail wheel struts by 16.5cm. A wedge-shaped spoiler was added to the starboard wing to correct the tendency of the port wing to stall first and roll out of control. Such modifications contributed greatly to the F4U-1A's suitability for use from aircraft carriers, although by this time it had been passed over for that duty by the F6F Hellcat. Unlike its predecessor, the F4U-1A would later be used as fighter-bomber, and was given the capability of carrying a drop tank under the fuselage, plus a bomb rack for use on raids supporting ground troops. This combination of fearsome performance in the air and bombing capability made the F4U-1A a vital component as the Allied forces conducted their 'island hopping' strategy progressing through the Solomon Islands.

See the following pages for more detailed information!

Vought


THE EVOLVED F4U-1A - SOME MAJOR MODIFICATIONS

About the Model• This is a 1/32 scale plastic model assembly kit.• The model captures the upgraded form of the F4U-1A variant with precision, including the semi-bubble

canopy and raised pilot seat. This required newly-designed cockpit interior parts. Details such as new instrumentation panel and console designs are also depicted.

• Clear engine cowling parts are included in EXPORT VERSION ONLY.• Modelers can choose whether to assemble the model with its distinctive inverted gull wings extended or

folded away. Flaps and elevators can also be depicted in open or closed positions. • Starboard wing spoiler is recreated.• Includes 2 types of tail landing gear wheel to enable depiction of elongated strut.• Comes with parts depicting drop tank and 500lb bomb.• 2 figures depict pilot in seated or standing position.• Synthetic rubber tires feature authentic tread patterns.• The complex Pratt & Whitney R-2800 engine is faithfully depicted in all its glory, including early variant

distributor. Removable 2-piece engine cowl allows its appreciation.• 2 types of photo-etched parts are included to add extra detail to the model.• Includes 3 sets of markings and painting guide. Recreate U.S. Navy or Marine Corps unit aircraft.• A stand is also included in the kit to depict the model in flight.• Features a newly-written cover story focussing upon the F4U-1A.• Comes with 12-page commemorative booklet featuring a history of the Corsair, plus photographs and

documentation. This booklet was also included in Item 60324 1/32 Scale Vought F4U-1 Corsair "Birdcage".• Use Item 89969 to achieve an even more realistic finish on the aircraft's panels and exhausts.


21

3

4

5

Semi-bubble canopy Higher cockpit on account of raising pilot's seat roughly 18cm

Ability to mount drop tank or 500lb bomb

Early variant of distributor

Tail landing gear wheel strut lengthened by 16.5cm

See the following page for more details about the model, including its depiction of these modifications.

6 Starboard wing spoiler balancing stall

6

5

4

1 2

3


Images show prototype CAD datacontinued from previous page...

1

5

3 4

2

6

The semi-bubble canopy is recreated with accuracy.

The blue (upper) seat in the image above shows the recreation of the pilot seat raised 18cm. Cockpit details have also been remodelled, such as depictions of controls, pedals and throttle lever.

The F4U-1A could be fitted with drop tank or 500lb bomb. The kit depicts these faithfully, and allows for their attachment on the fuselage underside.

The R-2800 engine is captured masterfully, including parts to depict the early variant distributor.

Accurately recreates the wedge-shaped spoiler which was installed on the starboard wing to give the F4U-1A better aerodynamic balance.

Includes 2 types of tail landing gear wheel piece to allow depiction of the 16.5cm-longer struts.


.

74549 Spray-Work HG Trigger-Type Airbrush (Super Fine)Availability: January, 2015 Order Unit: 6pcs.

Airbrushes

The latest addition to the Spray-Work series of high-quality airbrush system products, this new trigger type airbrushfeaturesasuperfinenozzleof just0.2mmindiameter,whichallowspaintingofveryfinelevelsofdetailandcamouflagepatterns.

About the Item• Large-capacitypaintcupcanhold7cc,andalsofeaturesgroovestohelppreventpaintdrips.Itisintegrated

into the body of the airbrush to allow easier cleaning. • Features a comfortable resin grip to allow easy control of the airbrush and its trigger.• This durable and precise metal airbrush features fluororesin packing in the needle cover for smooth

operation and long-term resistance to thinners.• Can be used with a wide variety of Tamiya Color acrylic and enamel paints, and most paints which can be

thinned. • Compatibleair sources include:AirCompressorREVOII (Item74542),BasicCompressorSet (Item

74520),CompactAirCompressor (Item74533),AirCan420D(Item74516)andAirCan180D(Item74517).


Coming Soon! September 2014 Page 20 of 24

Tools

74550 Spray-Work Airbrush Cleaning Brush (Extra-Fine)Availability: January, 2015 Order Unit: 120pcs.

74551 Spray-Work Airbrush Cleaning Brush (Standard)Availability: January, 2015 Order Unit: 120pcs.

Tamiya is pleased to announce the individual sale of these handy airbrush-cleaning brushes, which were originally only available as components of Item 74548. They feature a simple yet effective design which allows moreefficientandeffectivecleaningofyourimportantairbrushproducts.

About Item 74550• Thisextra-finebrushfeaturesdurablenylon

bristles and is for cleaning narrow spaces such as the nozzle.

• Approxdimensions:head length -12mm,diameter - 2mm. Brush length - 100mm.

About Item 74551• This standard-thickness brush features nylon

bristles and a stainless steel stem with grip. It is for use cleaning areas such as the paint cup after use of the airbrush.

• Approxdimensions:Head length -12mm,diameter - 7mm. Brush length - 98mm.

Top: Item 74550 Bottom: Item 74551Images show prototypes

.


85093 TS-93 Pure Blue Availability: December, 2014 Quantity per Carton: 72pcs.

Finishing Materials

85094 TS-94 Metallic GrayAvailability: December, 2014Quantity per Carton: 72pcs.

Originally releasedasMS-4MachBlue, thispaint provides an excellently balanced shade whichwillproveversatileandfittingforuseona range of different products, including but not limitedtoMini4WDmachinesandscalesportscar models.

Set Contents• Contents:100ml

Originally released asMS-5MetallicGray,thispaintprovidesashadeofGraywithslightred tones fitting for use on a range of different products. Inparticular, it is recommended foruseonItem89718McLarenMercedesMP4/13or Item14070HondaCBR1100XX -SuperBlackbird.

Set Contents• Contents:100ml


Finishing Materials

87164 Masking Tape w/Plastic Sheeting 550mmAvailability: January, 2015Quantity per Carton: 72pcs.

This is an extremely handy item which comes into its own when masking larger areas in the painting process, for example R/C car bodies. The masking tape comes pre-attached to plastic sheeting, and when folded out they have a width of 550mm.

About the Item• Tamiya masking tape attaches securely to the surface to be covered, protecting it from unwanted paint and

giving sharply defined edges. It peels off easily once the object has been painted.• Length: 10m.

Images show prototypes

Coming Soon!Tokyo Hobby Show 2014 August 25, 2014 Page 23 of 24

Finishing Materials

87165 Diorama Material Sheet (Stone Paving A) 87166 Diorama Material Sheet (Stone Paving B) 87167 Diorama Material Sheet (Stone Paving C) 87168 Diorama Material Sheet (Brickwork) 87169 Diorama Material Sheet (Gray-Colored Brickwork)

Availability: January, 2015 Quantity per Carton: 120pcs.

Part of the joy of scale modelling is the creation of diorama, realistic scenes which display your finished model in context and take it to the next level. These 5 sheets feature realistic patterns with a raised texture printed onto a craft paper background, and they allow simple yet highly effective recreation of surfaces and textures which would be seen in many typical diorama such as stone street paving and brick walls.

About the Items• Craft paper-based material can be cut easily to the desired size and attached to a diorama base or surface

using double-sided tape, Tamiya Craft Bond, wood glue, etc. • It can be painted with enamel and acrylic paints.• A4 size (297mmx210mm)

See next page for more examples of use

Image shows example use of Item 87165. Model and display base sold separately


Above: illustration shows examples of useBelow: prototype images show patterns


Stone paving A

Brickwork

Gray-colored brickwork

Stone paving B

Stone paving CBase

Base

(sold separately)

(sold separately)

Item 87165 Item 87166

Item 87168Item 87167 Item 87169

Documents

T September Page of 2 - Perth Hobby Centre coming... · Japan Motocross Championship, including Honda’s unique Pro-Link monoshock suspension that provided the ... success with 3