Upload
lehanh
View
213
Download
0
Embed Size (px)
Citation preview
Screens Reference Manual
Table of Contents TOC 1 Last Revised: October 2012 © 2012 Haworth, Inc.
T A B L E O F C O N T E N T S
UNIT 1: INTRODUCTION ...................................................................................................... 1
SCREENS REFERENCE MANUAL FOR CANVAS ......................................................................................... 1
CANVAS DISCLAIMER ..................................................................................................................... 1
SCREENS EXTENSION TAB ............................................................................................................... 1
MAIN SECTIONS OF THE SCREENS TAB ................................................................................................ 3
UNIT 2: SCREENS PRODUCTS AND OPTIONS ...................................................................... 5
PRODUCT / OPTION CHART ............................................................................................................. 5
SEQUENCE OF PRODUCTS / OPTIONS .................................................................................................. 5 Belong™ Screens .......................................................................................................................... 5 Belong Screen Materials................................................................................................................. 8 PREMISE® Screens ....................................................................................................................... 9 if® Screens ................................................................................................................................ 12 if Screen Materials ....................................................................................................................... 14 Schemes .................................................................................................................................... 15
UNIT 3: SCREENS TIPS AND TRICKS ................................................................................. 19
Screens Reference Manual
UNIT 1: Introduction 1 Last Revised: October 2012 © 2012 Haworth, Inc.
UNIT 1: INTRODUCTION
T O P I C S
SCREENS REFERENCE MANUAL FOR CANVAS ......................................................................................... 1
CANVAS DISCLAIMER ..................................................................................................................... 1
SCREENS EXTENSION TAB ............................................................................................................... 1
MAIN SECTIONS OF THE SCREENS TAB ................................................................................................ 3
Screens Reference Manual for Canvas
This reference manual shows how to specify Haworth product within Canvas. It contains information that
explains the Screen products and features within the Canvas program. As you are planning and designing within
the Canvas program for Screens, keep in mind this manual must be used in conjunction with the following
documents:
Beside Storage Price List
Reside Desking Price List
Reside Beside Belong Specification Guide
PREMISE Specification Guide / Price List
Tables Specification Guide / Price List
For additional CET Designer / Canvas information, see the following documents:
Canvas Reference Manual
CET Designer Reference Guide
Canvas Disclaimer
Canvas Software is intended solely as a conceptual specification tool. All SIF files, calculations, Bills
of Materials (BOMs), and specifications used within the tool should be verified by the dealership before
data entry. Canvas/Haworth shall not be responsible and/or be held accountable for any misuse of the
software, content, configurations, validations, or the output resulting from the information submitted. It
is the responsibility of the user to completely verify the parts specified, maintain a full understanding of
product applications, and understand the product limitations.
Screens Extension Tab
The following page shows a screen shot of where to locate the Screens extension tab:
Screens Reference Manual
UNIT 1: Introduction 2 Last Revised: October 2012 © 2012 Haworth, Inc.
Screens Extension Tab
Screens
Screens Reference Manual
UNIT 1: Introduction 3 Last Revised: October 2012 © 2012 Haworth, Inc.
Once you click on the Screens tab, you will see a main component tab with products and options for Screens.
This component tab is shown on the following page and provides an overview of what is included for the
Screens tab. These products provide visual privacy or sound screening, and are offered in a variety of sizes and
styles. The Belong Screens are part of the Integrated Palette product offering. You can add other products like
lighting, storage, desking, tables, or accessories by using: other component tabs, Project Matrix symbols within
Canvas, or import SketchUp™ models.
Main Sections of the Screens Tab
Within the Screens component tab, the main sections are:
Schemes: Belong™ Screens, PREMISE® Screens, and if® Screens
Belong Screens
Belong Screen Materials
PREMISE Screens
if Screens
if Screen Materials
The following page shows the main sections within the Screens component tab.
Screens Reference Manual
UNIT 1: Introduction 4 Last Revised: October 2012 © 2012 Haworth, Inc.
Haworth Screens Tab
Screens Reference Manual
Unit 2: Screens Products and Options 5 Last Revised: October 2012 © 2012 Haworth, Inc.
UNIT 2: SCREENS PRODUCTS AND OPTIONS
T O P I C S
PRODUCT / OPTION CHART ............................................................................................................. 5
SEQUENCE OF PRODUCTS / OPTIONS .................................................................................................. 5 Belong™ Screens .......................................................................................................................... 5 Belong Screen Materials................................................................................................................. 8 PREMISE® Screens ....................................................................................................................... 9 if® Screens ................................................................................................................................ 12 if Screen Materials ....................................................................................................................... 14 Schemes .................................................................................................................................... 15
Product / Option Chart
The Product / Option Chart is a detailed description of all products and options within the Screens component
tab. The chart includes columns for the following features:
Canvas Button: On-screen Canvas button for each product or option
Product Name: Haworth product name
Description / How to Use: Description of the product / How is the product or option used
Gray Input Box / Green Edit Box: Text boxes showing choices that can be made for each product
or option
Sequence of Products / Options
The Product / Option Chart follows the sequence of TOPICS listed above.
Belong™ Screens
In the Belong Screens section, you will find products and options that provide visual privacy for various
workspaces. There are numerous sizes, applications, options, materials, and finishes to complement the
workspace. The Belong Screens section has back, center, and end screens; territory screens; modesty
screens; and structural screens.
Belong Screens Tab
Screens Reference Manual
Unit 2: Screens Products and Options 6 Last Revised: October 2012 © 2012 Haworth, Inc.
Belong Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Back Screen Screen attaches to the back side of a Reside desking surface or base unit, or to an Adaptable worksurface. From the Gray Input Box, make the following application selections:
Height Width Surface: Fabric, Laminate,
Wood, or Glass. Autosize: Automatically matches
the width of the surface or base unit.
Once the product is placed, you can change the Surface from the Green Edit Box.
Center Screen This 14"-high screen sits in the center of a back-to-back Reside desking
surface or a Beside storage unit. From the Gray Input Box, make the following application selections: Width Surface: Fabric, Laminate,
Wood, or Glass. Autosize: Automatically matches
the width of the desking surface or base unit.
Once the product is placed, you can change the Surface from the Green Edit Box.
Sizes for Fabric
Sizes for Laminate, Wood, and Glass
End Screen Screen attaches to the end of a Reside desking surface. From the Gray Input Box, make the following application selections: Height Handedness Material Type: Fabric,
Laminate, Wood, or Glass. Once the product is placed, make the following changes from the Green Edit Box: Handedness Surface
Screens Reference Manual
Unit 2: Screens Products and Options 7 Last Revised: October 2012 © 2012 Haworth, Inc.
Belong Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Territory Screen
12"-high x 24"-deep screen sits on a worksurface. From the Gray Input Box, make the following application selections: Surface: Laminate, Wood, or
Glass.
Autosize: Automatically matches the depth of the surface.
Once the product is placed, you can change the Surface from the Green Edit Box.
Full Modesty Screen
Screen attaches to the back of a Reside desking surface or an Adaptable worksurface. From the Gray Input Box, make the following application selections: Height
Width Surface: Laminate or Wood Autosize: Automatically matches
the width of the surface. Once the product is placed, you can change the Surface from the Green Edit Box.
Structural “L” Screen
Combines a straight screen and return screen to form a corner screen. Attaches to a Reside desking surface or an Adaptable worksurface and is used in place of worksurface legs or
supports. From the Gray Input Box, make the following application selections: Height Width Depth Material Type: Laminate or
Wood Once the product is placed, you can change the Surface from the Green Edit Box.
Screens Reference Manual
Unit 2: Screens Products and Options 8 Last Revised: October 2012 © 2012 Haworth, Inc.
Belong Screen Materials
In the Belong Screen Materials section, there are five material options that are primarily used for
accent screen colors within your drawing. The five material options are shown below.
Belong Screen Materials Tab
Belong Screen Materials
Canvas Button
Option
Name
Description / How to Use
Gray Input Boxes
A
B
C
D
E
Laminate
Laminate
Edge
Fabric
Wood
Glass
Canvas functions to select various materials and apply them to screens.
Click on the ellipsis ( ) to get a list of materials and colors. Use this to select or change the material and colors to be applied. The Material Select box lists choices for the type of material you have selected. Once a material and color are selected, click on the black arrow ( ) to pick up this material and color and apply it to additional screens.
B
D C
E
A
Screens Reference Manual
Unit 2: Screens Products and Options 9 Last Revised: October 2012 © 2012 Haworth, Inc.
PREMISE® Screens
In the PREMISE Screens section, you will find products and options that provide visual privacy for
various workspaces. There are numerous sizes, applications, options, materials, and finishes to
complement the workspace. The PREMISE Screens section has single screens, canopy screens, desk-
attached screens, freestanding screens, and material toggles.
PREMISE Screens Tab
PREMISE Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Stand Alone This screen mounts to the underside of a worktop, worksurface, or table. Screen is 19"-high; screen with modesty extends an additional 16" below the worktop.
From the Gray Input Box, make the following application selections: Width Material: Fabric, Translucent, or
Markerboard. With Modesty: Check this box if
you want a modesty screen. Once the product is placed, you can make changes from the Green Edit Box.
Width Options
Worktop Mounted Screen Canopy
This 41"-high screen attaches to the top of a stand-alone worktop mounted screen. It has a fabric scrim insert. From the Gray Input Box, select Width. Once the product is placed, make the following selection from the Green Edit Box: Mirror: Flips the direction of the
canopy.
Screens Reference Manual
Unit 2: Screens Products and Options 10 Last Revised: October 2012 © 2012 Haworth, Inc.
PREMISE Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Floor-Height Banner
This banner attaches to a PREMISE panel. From the Gray Input Box, make the following application selections: Width Height
Material: Fabric or Translucent. Once the product is placed, you can make changes from the Green Edit Box.
Desk-Height Banner
This banner attaches to a PREMISE panel. From the Gray Input Box, make the following application selections: Width Height Material: Fabric or Translucent.
Once the product is placed, you can make changes from the Green Edit Box.
Freestanding Screen
This freestanding screen provides visual privacy, boundaries, or a writing surface. From the Gray Input Box, make the following application selections: Width Height
Once the product is placed, make the following selections or changes from the Green Edit Box: Material: Fabric, Translucent, or
Markerboard. Width Height
Screens Reference Manual
Unit 2: Screens Products and Options 11 Last Revised: October 2012 © 2012 Haworth, Inc.
PREMISE Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Material Toggle
Canvas function that allows you to change some or all of the screen materials in a drawing. From the Gray Input Box, make the following application selections: Material: Change material to
Fabric, Translucent, or Markerboard.
All Screens: Check this box if you want all screens to change material.
No Green Edit Box
Screens Reference Manual
Unit 2: Screens Products and Options 12 Last Revised: October 2012 © 2012 Haworth, Inc.
if® Screens
In the if Screens section, you will find products and options that provide visual privacy for various
workspaces. There are numerous sizes, applications, options, materials, and finishes to complement the
workspace. The if Screens section has single-material screens, two-material screens, panel-attached
screens, and a screen remover button.
if Screens Tab
if Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Screen (Single
Material)
This freestanding, mobile screen can stand alone or be ganged to additional same-height screens. From the Gray Input Box, make the
following application selections: Width Height Once the product is placed, make the following selection from the Green Edit Box: Splitted: If you want to change
to a two-material screen, check this box.
Screen (Two Materials)
This freestanding, mobile screen can stand alone or be ganged to additional same-height screens. It has a markerboard on top and a perforated metal or frosted insert on the bottom. From the Gray Input Box, make the following application selections: Width Height Once the product is placed, make the following selection from the Green Edit Box: Splitted: If you want to change
to a single-material screen, leave this box unchecked.
Screens Reference Manual
Unit 2: Screens Products and Options 13 Last Revised: October 2012 © 2012 Haworth, Inc.
if Screens
Canvas Button
Product
Name
Description / How to Use
Gray Input Boxes / Green Edit Boxes
Panel-Attached Screen
(Attaches to all systems
except Compose)
Screen attaches parallel to a systems panel at the panel end or at a 2-way connection. From the Gray Input Box, select Height. Once the product is placed, you can change the Height from the Green Edit Box.
Change to Screen with
Single Material
Canvas function to quickly change material type. Click on the change icon below the screen with single material. In the drawing area, click on the two-material screen that you want to change; Canvas changes it to a single-material screen.
No Gray Input Box
Change to Screen with
Two Materials
Canvas function to quickly change material type. Click on the change icon below the screen with two materials. In the drawing area, click on the single-material screen that you want to change; Canvas changes it to a two-material screen.
No Gray Input Box
if Screen Remover
Canvas function to remove if Screens. Click on the “X” icon and move to the drawing area. Click on the screen you want to remove.
No Input/Edit Boxes
Screens Reference Manual
Unit 2: Screens Products and Options 14 Last Revised: October 2012 © 2012 Haworth, Inc.
if Screen Materials
In the if Screen Materials section, there are five material options that are primarily used for accent
colors within your drawing. The five material options are shown below.
if Screen Materials Tab
if Screen Materials
Canvas Button
Option Name
Description / How to Use
Gray Input Boxes
A
B
C
D
E
Fabric
Perforated
Frosted
Trim
Metallic
Canvas functions to select various materials and apply them to if
screens. Click on the ellipsis ( ) to get a list of materials and colors. Use this to select or change the material and colors to be applied. The Material Select box lists choices for the type of material you have selected. Once a material and color are selected, click on the black arrow ( ) to pick up this material and color and apply it to additional screens.
B
D C
E
A
Screens Reference Manual
Unit 2: Screens Products and Options 15 Last Revised: October 2012 © 2012 Haworth, Inc.
Schemes
In the Schemes section, you can select options, materials, and finishes for application to all or selected
screens within your work space configuration. This saves time and creates consistency. Schemes can be
used and saved for:
Specific clients and used for multiple installations
Color/finish schemes
Global changes
For additional information on creating and applying Schemes, see Unit 4a (Canvas, Working with
Haworth Furniture) in the CET Designer Reference Guide.
There are three Scheme options within Screens:
Belong Screens: Use when applying the same materials and colors to multiple Belong screens or
entire work spaces.
PREMISE Screens: Use when applying the same materials and colors to multiple PREMISE
screens or entire work spaces.
if Screens: Use when applying the same materials and colors to multiple if screens or entire
work spaces.
Belong Screens – Schemes Tab
Screens Reference Manual
Unit 2: Screens Products and Options 16 Last Revised: October 2012 © 2012 Haworth, Inc.
Belong Screens – Schemes
Canvas Button
Option
Name
Description / How to Use
Dialog Boxes
Haworth Scheme
Manager for Belong Screens
Scheme Manager dialog box with options for Belong screens. In the Scheme Manager dialog box, select the Properties for this particular scheme (our example
shows a client scheme for ABC Design). Once you have made your selections, click Apply, and Save your scheme. Another scheme option is to save a color/finish scheme. For example, save a “Graphite” finish scheme. Select the graphite finish Properties, name the scheme, and click on Save. These same finishes can be used for multiple clients and projects.
Screens Reference Manual
Unit 2: Screens Products and Options 17 Last Revised: October 2012 © 2012 Haworth, Inc.
PREMISE Screens – Schemes
Canvas Button
Option
Name
Description / How to Use
Dialog Boxes
Haworth Scheme
Manager for PREMISE
Screens
Scheme Manager dialog box with options for PREMISE screens. In the Scheme Manager dialog box,
select the Properties for this particular scheme (our example shows a client scheme for ABC Design). Once you have made your selections, click Apply, and Save your scheme.
Screens Reference Manual
Unit 2: Screens Products and Options 18 Last Revised: October 2012 © 2012 Haworth, Inc.
if Screens – Schemes
Canvas Button
Option
Name
Description / How to Use
Dialog Boxes
Haworth Scheme
Manager for if Screens
Scheme Manager dialog box with options for if screens. In the Scheme Manager dialog box, select the Properties for this particular scheme (our example
shows a client scheme for ABC Design). Once you have made your selections, click Apply, and Save your scheme. Another scheme option is to save a color/finish scheme. For example, save a “Metallic Champagne” finish scheme. Select the metallic champagne finish Properties, name the scheme, and click on Save. These same finishes can be used for multiple clients and projects.
Screens Reference Manual
Unit 3: Screens Tips and Tricks 19 Last Revised: October 2012 © 2012 Haworth, Inc.
UNIT 3: SCREENS TIPS AND TRICKS
The following chart covers helpful tips as you navigate through the Canvas program and design with Screens.
Product Tips and Tricks
Belong Screens
Back Screen Designed for single-sided applications. Fabric surface is non-tackable.
Center Screen Designed for center back-to-back Reside Desking worksurfaces and Beside Storage. Fabric surface is non-tackable.
End Screen Designed for end of Reside Desking worksurfaces only. End screens not designed for use with power pole applications. Fabric surface is non-tackable.
Territory Screen Screen sits on a worksurface.
Full Modesty Screen Designed for back edge of Reside Desking worksurfaces and most Adaptable worksurfaces.
Structural “L” Screen Designed to be used in place of Reside Desking or Adpatable worksurface legs or supports.
PREMISE Screens
Stand Alone
Screens have no acoustical or tackable properties. Recommended screen width is 12" less than worktop width. Markerboard is a two-sided acrylic surface.
Floor-Height Banner Banners have no acoustical or tackable properties. Banners are 6 3/4" above the floor at raceway height. Banners extend 16" above the panel.
Desk-Height Banner Banners have no acoustical or tackable properties. Banners extend 16" above the panel.
Freestanding Screen Screens have no acoustical or tackable properties. Markerboard is a two-sided acrylic surface.
Screens Reference Manual
Unit 3: Screens Tips and Tricks 20 Last Revised: October 2012 © 2012 Haworth, Inc.
Product Tips and Tricks
if Screens
Screen (Single Material and Two Materials)
Same-height screens can be ganged together. Screens cannot be folded together. Magnets can be used with perforated metal inserts.
Panel-Attached Screen
Attaches to all panels except Compose panels. Screens are non-load bearing.