T A B L E O F C O N T E N T S - Haworth Series-Reference Manual.p… · Wardrobe JWPC (30", 36", and 42" width) 4 – 5 High This storage cabinet is 18 3/4" deep. It has 2 hinged

X Series® Storage Reference Manual

Table of Contents TOC 1 Last Revised: September 2013 © 2013 Haworth, Inc.

T A B L E O F C O N T E N T S

UNIT 1: INTRODUCTION ...................................................................................................... 1

X SERIES STORAGE REFERENCE MANUAL FOR CANVAS ............................................................................ 1

CANVAS DISCLAIMER ..................................................................................................................... 1

X SERIES STORAGE EXTENSION TAB .................................................................................................. 1

MAIN SECTIONS OF THE X SERIES STORAGE TAB ................................................................................... 3

UNIT 2: X SERIES STORAGE PRODUCTS AND OPTIONS ...................................................... 5

PRODUCT / OPTION CHART ............................................................................................................. 5

SEQUENCE OF PRODUCTS / OPTIONS .................................................................................................. 5 Storage ........................................................................................................................................ 5 Casegoods .................................................................................................................................. 13 Pulls........................................................................................................................................... 23 Front Style ................................................................................................................................. 24 Schemes .................................................................................................................................... 25 Cabinet Material .......................................................................................................................... 28 Top Materials .............................................................................................................................. 29 Translucent Material .................................................................................................................... 30

UNIT 3: X SERIES STORAGE TIPS AND TRICKS ................................................................. 31


UNIT 1: Introduction 1 Last Revised: September 2013 © 2013 Haworth, Inc.

UNIT 1: INTRODUCTION

T O P I C S

X SERIES STORAGE REFERENCE MANUAL FOR CANVAS ............................................................................ 1

CANVAS DISCLAIMER ..................................................................................................................... 1

X SERIES STORAGE EXTENSION TAB .................................................................................................. 1

MAIN SECTIONS OF THE X SERIES STORAGE TAB ................................................................................... 3

X Series Storage Reference Manual for Canvas

This reference manual shows how to specify Haworth product within Canvas. It contains information that

explains the X Series Storage products and features within the Canvas program. As you are planning and

designing within the Canvas program, keep in mind this manual must be used in conjunction with the following

document:

Steel Casegoods / Files and Storage Price List (X Series Price List)

For additional CET Designer / Canvas information, see the following documents:

Canvas Reference Manual

CET Designer Reference Guide

Canvas Disclaimer

Canvas Software is intended solely as a conceptual specification tool. All SIF files, calculations, Bills

of Materials (BOMs), and specifications used within the tool should be verified by the dealership before

data entry. Canvas/Haworth shall not be responsible and/or be held accountable for any misuse of the

software, content, configurations, validations, or the output resulting from the information submitted. It

is the responsibility of the user to completely verify the parts specified, maintain a full understanding of

product applications, and understand the product limitations.

X Series Storage Extension Tab

The following page shows a screen shot of where to locate the X Series Storage extension tab:



X Series Storage Extension Tab

X Series

Storage



Once you click on the X Series Storage tab, you will see a main component tab with products and options for

the X Series Storage system. This component tab is shown on the following page and provides an overview of

what is included for the X Series Storage product line. Products included are storage units, casegoods, pulls, and

various material options.

Main Sections of the X Series Storage Tab

Within the X Series Storage component tab, the main sections are:

Schemes: X Series Storage and X Series Casegoods

Storage

Casegoods

Pulls

Front Style

Cabinet Material

Top Materials

Translucent Material

The following page shows the main sections within the X Series Storage component tab.



Haworth X Series Storage Tab

Schemes

Storage

Pulls

Front

Style

Casegoods

Cabinet

Material

Top

Materials

Translucent

Material


Unit 2: X Series Storage Products and Options 5 Last Revised: September 2013 © 2013 Haworth, Inc.

UNIT 2: X SERIES STORAGE PRODUCTS AND OPTIONS

T O P I C S

PRODUCT / OPTION CHART ............................................................................................................. 5

SEQUENCE OF PRODUCTS / OPTIONS .................................................................................................. 5 Storage ........................................................................................................................................ 5 Casegoods .................................................................................................................................. 13 Pulls........................................................................................................................................... 23 Front Style ................................................................................................................................. 24 Schemes .................................................................................................................................... 25 Cabinet Material .......................................................................................................................... 28 Top Materials .............................................................................................................................. 29 Translucent Material .................................................................................................................... 30

Product / Option Chart

The Product / Option Chart is a detailed description of all products and options within the X Series Storage

component tab. The chart includes columns for the following features:

Canvas Button: On-screen Canvas button for each product or option

Product Name: Haworth product name

Description / How to Use: Description of the product / How is the product or option used

Gray Input Box / Green Edit Box: Text boxes showing choices that can be made for each product

or option

Sequence of Products / Options

The Product / Option Chart follows the sequence of TOPICS listed above.

Storage

In the Storage section, you will find products and options to plan storage components within your

workstation. The variety of products available offers planning flexibility along with multiple function

and aesthetic options. The Storage section includes pedestals, lateral files, bookcases, combination

units, personal storage towers, storage cabinets, and wardrobes.

Storage Tab



X Series – Storage

Canvas Button

Product

Name

Description / How to Use

Gray Input Boxes / Green Edit Boxes

Mobile Pedestals

JPMH, JPMJ, and JPMA

(18", 24", and 30" deep)

2 - 3 Drawers

This 15"-wide mobile pedestal has three depths and numerous drawer layouts. It has a steel case, casters, and a finished back and top. From the Gray Input Box, make the

following application selections: Depth Drawer Layout Tug: Includes a handle for

moving the pedestal. Cushion: Not available on 29"-

deep pedestal. Once the product is placed, you can make changes from the Green Edit Box.

For 17"- and 23"-Deep Pedestals

For 29"-Deep Pedestal

Suspended Pedestals

JPHH, JPHJ, and JPHA

(18" and 24" deep)

2 - 3 Drawers

This 15"-wide suspended pedestal has two depths, numerous drawer

layouts, and a steel case. From the Gray Input Box, make the following application selections: Depth Drawer Layout Once the product is placed, you can make changes from the Green Edit Box.

Attached Pedestals

JPAH and JPAJ (18", 24", and

30" deep) 2 - 3 Drawers

This 15"-wide, 15 ½"-high pedestal attaches under a worksurface and

also sits on the floor. It has three depths, several drawer layouts, a steel case, and glides. From the Gray Input Box, make the following application selections: Depth Drawer Layout

Once the product is placed, you can make changes from the Green Edit Box.




Canvas Button

Product

Name



Lateral Files JLPD

(30", 36", and 41" width) 2 - 5 High

This lateral file can be used freestanding or attached under a worksurface. From the Gray Input Box, make the following application selections: Height

Width Legs Counterweight Inset: Standard depth is 18 3/4".

Inset depth is 18".

Once the product is placed, make the following changes or selections from the Green Edit Box: Height Counterweight Inset Common/File Top

Leg Option

Counterweight Option

Common/File Top Options

Lateral File Bench

This 30"-wide lateral file has a 12"-high case with one lateral file drawer. It has a hinged, cushioned lid; translucent front; and four legs.

No Input or Edit Boxes

Bookcases JBCS

(30", 36", and 41" width) 2 – 5 High

This 14"-deep bookcase has adjustable shelves and glides. From the Gray Input Box, make the following application selections: Height Width Legs: Only available on 30"-wide

2-, 3-, or 4-high bookcases. Once the product is placed, you can change the Height in the Green Edit Box.

For 29.88" Width / 2-, 3-, or 4-High Only




Canvas Button

Product

Name



Combination Units

This combination unit can be used freestanding or attached under a worksurface. It is 27 1/2" high, 18 3/4" deep, and 27 7/8" wide. These units include configurations with open shelves, box and file drawers, lateral file drawers, and door units. From the Gray Input Box, make the following application selections: Layout: Specify as follows:

o Open Shelf: One open shelf and one lateral file drawer.

o F/B/B/Lat: File/box/box drawers and one lateral file drawer.

o Door/B/B/F: Door unit left; box/box/file right.

o Door/F/F/: Door unit left; file/file right.

o B/B/F/Lat: Box/box/file drawers and one lateral file drawer.

o B/B/F/Door: Box/box/file left; door right.

o F/F/Door: File/file left; door right.

Legs: Only available on the Open Shelf unit.

Touch Latch: Only available on units with Doors.





Canvas Button

Product

Name



Combination Unit

JCPV, JCPY, and JCPX

(30", 36", and 42" width) 3 – 5 High

This freestanding combination unit is 18 3/4" deep. The units include one or more lateral file drawers and an upper door unit. From the Gray Input Box, make the following application selections: Height Width Drawers: Select for 2-high unit

only. Door Type Touch Latch Once the product is placed, you can make changes from the Green Edit Box.

For 1-High Unit

For 2-High Unit




Canvas Button

Product

Name



Personal Storage Towers

2 - 6 High

This storage tower is 23" deep and 24" wide. It is available in a variety of storage component layouts. From the Gray Input Box, make the following application selections: Height Drawer Layout Valet Side Storage/Bookcase: Not

available on the 2- or 3-high storage towers.

Top Translucent Valet

Touch Latch Wood Front Support: Only available on the

2-, 3-, and 4-high Once the product is placed, you can make changes from the Green Edit Box.




Canvas Button

Product

Name



Storage Cabinet

JSPY (30", 36", and

42" width) 2 – 5 High

This storage cabinet is 18 3/4" deep. It has 2 hinged doors, a shelf or shelves, and adjustable glides. From the Gray Input Box, make the following application selections: Height

o 2 High: 27 1/2" o 3 High: 39 1/2" o 4 High: 51 1/2" o 5 High: 63 1/2"

Width Touch Latch Once the product is placed, you can make changes from the Green Edit Box.

Wardrobe JWPC

(30", 36", and

42" width) 4 – 5 High

This storage cabinet is 18 3/4" deep. It has 2 hinged doors, a shelf, a coat rod, and adjustable glides.

From the Gray Input Box, make the following application selections: Height

o 4 High: 51 1/2" o 5 High: 63 1/2"

Width Touch Latch Once the product is placed, you can make changes from the Green Edit Box.

Combination

Unit with Valet

(30" and 42" width) 5 High

This storage unit is 18 3/4" deep. It

has a valet cabinet on the left or right side, a storage unit with door, a combination of box and/or file drawers, and adjustable glides. From the Gray Input Box, make the following application selections: Width Drawer Layout Pedestal Side Touch Latch Once the product is placed, you can make changes from the Green Edit

Box.

For 29.88"-Wide Unit

For 41.88"-Wide Unit




Canvas Button

Product

Name



Remove Canvas function to remove storage components (any component within the X Series Storage tab). Click on the “X” icon and move to the drawing area. Click on the storage component(s) you want to remove.

No Input/Edit Boxes



Casegoods

In the Casegoods section, you will find worksurface and storage products and options. The Casegoods

section includes pedestal desks, shells, credenzas, bridges, wrap-around surfaces (with or without

pedestals), returns, convergents, vertical storage units, and task lighting.

Casegoods Tab

X Series – Casegoods

Canvas Button

Product

Name



Double Pedestal Desk

This casegood has left and right steel pedestals, painted or wood fronts, and adjustable glides. From the Gray Input Box, make the following application selections: Executive: Worksurface top

overhangs on the front and sides. Depth:

o Standard depths are 24" and 30"

o Executive depths are 30" and 36"

Width Modesty Surface Front Left Pedestal Right Pedestal Once the product is placed, you can make changes from the Green Edit Box.

For Standard Desk

For Executive Desk




Canvas Button

Product

Name



Single Pedestal Desk

This casegood has a left or right steel pedestal, a painted or wood front, and adjustable glides. From the Gray Input Box, make the following application selections: Executive: Worksurface top

overhangs on the front and sides. Depth:



Width Modesty Surface: For executive desk. Front Pedestal Side Left or Right Pedestal

Configuration Once the product is placed, you can make changes from the Green Edit Box.

For Standard Desk

For Executive Desk

Desk Shell This 29"-high shell can accept an attaching lateral file or storage unit. It includes adjustable glides. From the Gray Input Box, make the following application selections: Executive: 6" overhang on

visitor’s side for conferencing. Depth:



Width Modesty Once the product is placed, you can make changes from the Green Edit Box.

For Standard Desk

For Executive Desk




Canvas Button

Product

Name



Credenza This 29"-high credenza is 24" wide and is available in a combination of lateral files, pedestals, and storage units. It is used freestanding or can be placed inside a desk shell. From the Gray Input Box, make the

following application selections: Width Touch Latch: For the Storage

Units only. Drawer Layout

o 60" wide: 3 layouts. o 66" wide: Layout is

File/File on each end and storage unit in the middle.

o 72" wide: 3 layouts. Top/Front: Surface materials for

the top and file/storage unit fronts.

Front Style: Choose this for Painted fronts.

Wood Lockbar: Option for Wood fronts.


For 60"-Wide Credenza



Bridge This bridge connects two freestanding X Series units and has a laminate or wood surface. From the Gray Input Box, make the following application selections:

Width Modesty Surface From the Green Edit Box, make the following application selections: VSU Side




Canvas Button

Product

Name



Curved Wrap-Around

Extended with Pedestal

This 29"-high casegood has a curved wrap-around surface, a steel pedestal on one end, and adjustable glides. The top surface and pedestal front can be laminate or wood. Attach this product to an adjoining casegood.

From the Gray Input Box, make the following application selections: Modesty Surface: Laminate or Wood. Pedestal Side Front: Choose this for Painted

fronts. Wood Lockbar: Option for

Wood fronts. Left or Right Pedestal

Configuration Once the product is placed, you can make changes from the Green Edit

Box.

For Laminate Surface

For Wood Surface

Curved Wrap-Around

Extended with Full End

Panel

This 29"-high laminate casegood has a curved wrap-around surface, full end panels, and adjustable glides. This product is designed for use with 18"-deep pedestals. Attach this product to an adjoining casegood. From the Gray Input Box, make the following application selections: Width Modesty Handed: When facing the inside

of the wrap-around, specify as follows:

o Left: Longer width is on the left-hand side.

o Right: Longer width is on the right-hand side.





Canvas Button

Product

Name



Curved Wrap-Around

Extended Transitional

with Pedestal

This 29"-high casegood has a curved wrap-around surface, a steel pedestal on one end, and adjustable glides. The top surface and pedestal front can be laminate or wood. Attach this product to an adjoining casegood.

From the Gray Input Box, make the following application selections: Modesty Surface: Laminate or Wood. Pedestal Side Front: Choose this for Painted

fronts. Wood Lockbar: Option for

Wood fronts. Left or Right Pedestal

Configuration Once the product is placed, you can make changes from the Green Edit

Box.


For Wood Surface

Curved Wrap-Around

Extended Transitional with Full End

Panel

This 29"-high casegood has a curved wrap-around laminate surface, full end panels, and adjustable glides. It is designed for use with 18"-deep pedestals. Attach this product to an adjoining casegood. From the Gray Input Box, make the following application selections: Width Modesty Handed: When facing the inside


o Left: Longer width is on the left-hand side.

o Right: Longer width is on the right-hand side.





Canvas Button

Product

Name



Return (with

Pedestal)

This casegood has a left or right steel pedestal, a laminate or wood surface, and adjustable glides. It attaches to a single pedestal desk, corner unit, or convergent with end panel. From the Gray Input Box, make the

following application selections: Width Modesty Surface Wood Lockbar: Option for

Wood fronts. Pedestal Side Front: Choose this for Painted

fronts. Left or Right Pedestal

Configuration From the Green Edit Box, make the following application selections:

VSU Side: VSU is on the opposite side of the pedestal.

VSU Application


For Wood Surface




Canvas Button

Product

Name



Return Case This case has a laminate or wood surface, full end panel on one side, and adjustable glides. It attaches to a single pedestal desk, corner unit, or convergent with end panel. It can be used with an 18"-deep mobile pedestal.

From the Gray Input Box, make the following application selections: Width Modesty Surface Handed: When facing the inside

of the return case, specify as follows:

o Left: Full end panel is on the left-hand side.

o Right: Full end panel is on the right-hand side.

From the Green Edit Box, make the following application selections: Wood Lockbar: Option for

Wood fronts. VSU Side: VSU is on the

opposite side of the end panel. VSU Application

Convergent with End

Panel

This convergent surface has a laminate or wood surface and full end panel. It must attach to a bridge or return. From the Gray Input Box, make the following application selections: Depth Surface Once the product is placed, you can make changes from the Green Edit Box.




Canvas Button

Product

Name



Curved Wrap-Around “D”

This curved surface with a convergent end has a laminate or wood surface and modesty panel. It must attach to an adjoining casegood. From the Gray Input Box, make the following application selections:

Length Modesty Handed: When facing the inside


o Left: Convergent end is extended on the left-hand side.

o Right: Convergent end is extended on the right-hand side.


Corner This corner surface has a straight edge across the corner, a laminate or wood surface, a modesty panel, and adjustable glides. Both sides must attach to an adjoining casegood. From the Gray Input Box, make the following application selections: Width Modesty


Curved Wrap-Around Corner

This corner surface has a curved edge across the corner, a laminate or wood surface, a modesty panel, and adjustable glides. Both sides must attach to an adjoining casegood. From the Gray Input Box, make the following application selections: Width Modesty

Once the product is placed, you can

make changes from the Green Edit Box.




Canvas Button

Product

Name



Curved Wrap-Around

Extended Corner

This 29"-high casegood has a wrap-around laminate surface that extends on one end and adjustable glides. It has a curved edge across the corner. The corner surface is designed for use with 18"-deep pedestals. Attach this product to an adjoining casegood.

From the Gray Input Box, make the following application selections: Modesty Handed: When facing the inside


o Left: Extended corner is on the left-hand side.

o Right: Extended corner is on the right-hand side.

Once the product is placed, you can make changes from the Green Edit

Box.

Vertical Storage Unit

This storage unit is 34" high and 14" deep and mounts on a desk or credenza top. The 48"- and 60"-wide units have one tackboard; 66"- and 72"-wide units have two tackboards.

From the Gray Input Box, make the following application selections: Width:

o 48"-wide units have one door and a lock.

o 60"-, 66"-, and 72"-wide

units have two doors and a lock.

Storage: o Open Storage o Closed Storage: Choose

laminate or wood flipper door material.

Free Place: Canvas function to place the unit freely within the work space. When this box is checked, Canvas will not take into consideration the rules of where this product can sit.


For Open Storage Option

For Closed Storage Option




Canvas Button

Product

Name



Task Light This charcoal light provides task lighting beneath shelves or overhead storage units.

No Green Edit Box



Pulls

In the Pulls section, you will find several pull options to use on X Series Storage. There are a variety of

style, finish, and compatibility options. These pull options are shown below.

Pulls Tab

Canvas Button Pull Name

Finish Selection

Metallic Finish

Non-metallic Finish

Matching Case Trim Pulls

Taper Pull

J-Pull

Integral Pull

Brushed Nickel Finish Pulls

Classic Pull

Crescent Pull

Linear Pull



Front Style

Use the Front Style feature to change the painted style pattern or to change your wood color.

Front Style Tab

X Series – Front Style

Canvas Button

Option Name


Dialog Boxes

Painted

Canvas button for choosing a solid painted front or one of three perforated front styles.

Wood

Click on the black arrow and choose your wood material and color for the front of your X Series storage component.



Schemes

In the Schemes section, you can select options, materials, and finishes for application to all or selected

X Series Storage products within your workstation. This saves time and creates consistency. Schemes

can be used and saved for:

Specific clients and used for multiple installations

Color/finish schemes

Global changes

For additional information on creating and applying Schemes, see Unit 4a (Canvas, Working with

Haworth Furniture) in the CET Designer Reference Guide.

There are two Scheme options for X Series products:

X Series Storage: Use when applying the same options and finishes to multiple storage

components or entire work spaces.

X Series Casegoods: Use when applying the same options and finishes to multiple casegoods or

entire work spaces.

Schemes Tab



X Series Storage – Schemes

Canvas Button

Option

Name


Dialog Boxes

Haworth Scheme

Manager for X Series

Storage

Scheme Manager dialog box with many options for X Series Storage products. In the Scheme Manager dialog box, select the Properties for this

particular scheme (our example shows a client scheme for ABC Design). Once you have made your selections, click Apply, and Save your scheme. Another scheme option is to save a color/finish scheme. For example, save a “Graphite” finish scheme. Select the graphite finish Properties, name the scheme, and click on Save. These same finishes can be used for multiple clients and projects.



X Series Storage – Schemes

Canvas Button

Option

Name


Dialog Boxes

Haworth Scheme

Manager for X Series

Casegoods

Scheme Manager dialog box with many options for X Series Casegood products. In the Scheme Manager dialog box, select the Properties for this

particular scheme (our example shows a client scheme for ABC Design). Once you have made your selections, click Apply, and Save your scheme. Another scheme option is to save a color/finish scheme. For example, save a “Graphite” finish scheme. Select the graphite finish Properties, name the scheme, and click on Save. These same finishes can be used for multiple clients and projects.



Cabinet Material

In the Cabinet Material section, there are four material options that are primarily used for accent colors

on X Series Storage cabinets. These material options are shown below.

Cabinet Material Tab

X Series Storage – Cabinet Material

Canvas Button

Option

Name


Dialog Box

A

B

C

D

Trim

Lock

Fabric

VSU Bracket

Canvas functions to select various materials and apply them to X Series cabinets. Click on the ellipsis ( ) to get a list of materials and colors. Use this to select or change the material and colors to be applied. The Material Select box lists choices for the type of material you have selected. Once a material and color are selected, click on the black arrow ( ) to pick up this material and apply it to surfaces in your drawing.

A

C

B

D



Top Materials

In the Top Materials section, there are four material options that are primarily used for accent colors

within your drawing. These material options are shown below.

Top Materials Tab

X Series Storage – Top Materials

Canvas Button

Option

Name


Gray Input Boxes

A

B

C

D

Wood

Laminate

Edge

Cushion Fabric

Canvas functions to select various materials and apply them to X Series components. Click on the ellipsis ( ) to get a list of

materials and colors. Use this to select or change the material and colors to be applied. The Material Select box lists choices for the type of material you have selected. Once a material and color are selected, click on the black arrow ( ) to pick up this material and apply it to additional surfaces.

A

C B

D



Translucent Material

In the Translucent Material section, you can select an accent color or pattern to be used in your

drawing. An example of the translucent option is shown below.

Translucent Material Tab

X Series Storage – Translucent Material

Canvas Button

Option

Name


Gray Input Boxes

Translucent Canvas function to select a translucent material and apply it to X Series components. Click on the ellipsis ( ) to get a list of translucent colors and patterns. Use this to select or change the color or pattern to be applied. The Material Select box lists translucent options. Once the material and color are selected, click on the black arrow ( ) to pick up this material and apply it to additional surfaces.


Unit 3: X Series Storage Tips and Tricks 31 Last Revised: September 2013 © 2013 Haworth, Inc.

UNIT 3: X SERIES STORAGE TIPS AND TRICKS

The following chart covers helpful tips as you navigate through the Canvas program and design with the X

Series Storage products.

Product Tips and Tricks

X SERIES STORAGE

Suspended Pedestals

Suspended pedestals must attach under a worksurface equal to or deeper than the pedestal depth specified.

Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES. Suspended pedestals are not for use with steel casegoods. Suspended pedestals are not for use with 18"-deep worksurfaces with knife edge.

Combination Units

Attached units must attach under a worksurface 20" or deeper. Attached units are not for use with 18"-deep worksurfaces with knife edge.

Combination Units (JCPV, JCPY, JCPX) 30"-, 36"-, and 42"-wide

3 – 5 High

Counterweight option recommended for files that are not ganged together or are not anchored to a fixed object.

X SERIES CASEGOODS

Credenza Credenzas with overhang tops cannot accept a vertical storage unit.

Task Light For use with 120 volt 60 hertz electrical systems only.

Documents

T A B L E O F C O N T E N T S - Haworth Series-Reference Manual.p… · Wardrobe JWPC (30", 36", and 42" width) 4 – 5 High This storage cabinet is 18 3/4" deep. It has 2 hinged