Upload
tranngoc
View
224
Download
1
Embed Size (px)
Citation preview
SYSTEM 6® UTP PRODUCTS
Utilised with Siemon System 6 UTP cable, the Siemon category 6 connectivity familyoffers exceptional value in an end-to-end System 6 solution - a high-performancesystem meeting all category 6 requirements.
4.0 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
SYSTEM 6® UTP PRODUCTS
SECTION CONTENTS
MAX® 6 UTP Modules . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2
HD® 6 UTP Patch Panels . . . . . . . . . . . . . . . . . . . . . . . . .4.3
MAX Patch Panels . . . . . . . . . . . . . . . . . . . . . . . .4.4 – 4.5
MAX Panel Accessories . . . . . . . . . . . . . . . . . . . . . . . . .4.5
BladePatch® 6 UTP Modular Cords . . . . . . . . . . . . . . . . .4.6
MC® 6 UTP Modular Cords . . . . . . . . . . . . . . . . . . . . . .4.7
MC 6 VoIP Modular Cords . . . . . . . . . . . . . . . . . . . . . . .4.8
IC 6 Solid Single-Ended Modular Cords . . . . . . . . . . . . .4.8
S210® to MC Cable Assemblies . . . . . . . . . . . . . . . . . . .4.8
S210 Connection System . . . . . . . . . . . . . . . . . . . . . . . .4.9
S210 Field Termination Kits . . . . . . . . . . . . . . . . . . . . . .4.9
S210 Patch Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.10
S210 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . .4.10
Category 6 UTP Trunking Cable Assemblies . . . .4.11 – 4.12
System 6 UTP Cable . . . . . . . . . . . . . . . . . . . . . . . . . .4.13
W W W . S I E M O N . C O M 4.1
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
For CT Coupler options, visit our web site orcontact our Customer Service Department
SYSTEM 6® UTP PRODUCTS
4.2 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
MX6-(XX) . . . . . . . . . . . . . Category 6 Angled MAX module,T568A/B, rear strain relief cap andprotective colour-matching rubber door*
Use (XX) to specify colour: 01 = black, 02 = white, 03 = red, 04 = grey, 05 = yellow, 06 = blue, 07 = green, 09 = orange, 20 = ivory, 25 = bright white, 80 = light ivoryAngled modules include one colour-matching, one red, and one blue icon. *Door colour is clear for red, yellow, blue and orange angled modules.Flat modules include one colour-matching, one red, and one blue icon. Keystone version is designed for integration with various international mounting products and is not compatible with MAX mounting hardware.
Add “B” to end of part number for bulk project pack of 100 modules (angled and flat modules include icons).
MAX 6 UTP MODULES
1
23
4
5
6
MX6-F(XX) . . . . . . . . . . . . Category 6 Flat MAX module,T568A/B, rear strain relief cap
MX6-K(XX) . . . . . . . . . . . . Category 6 Keystone MAXmodule, T568A/B, rear strainrelief cap
MAX® 6 UTP MODULES
Part of Siemon’s category 6 UTP end-to-end Cabling Solution, the MAX 6module provides performance far exceeding category 6 connecting hardware
performance specifications.
It’s compact design is ideal for high density applications. Up to six modules can beutilised in a single gang faceplate and twelve modules in a double gang faceplate.Also, the angled MAX module provides a gravity feed, low-profile design for thework area — greatly improving patch cord management in installations whereclearance is at a minimum.
Flexible Installation — Install fromeither front or rear of faceplateEasy Termination — Terminateswith standard 110 termination toolsQuick Identification — Iconsprovided for port identification
Backward Compatible — Withcategory 5e/class D systemcomponentsUniversal Wiring — T568A andT568B wiring compatibleProtective Doors — Minimiseexposure to dust and othercontaminants (doors not shown)
1 4
2
3
5
6
Quick InstallationPyramid wire entry system on S310 blocksseparates paired conductors when lacingcables to simplify and reduce installationtime.
TerminationSiemon’s Palm Guard with MAX insert (p/n: PG-MX6) assists in securing moduleduring termination.
Superior PerformanceFor superior performance use MC® 6modular cords to unlock the performanceof MAX 6 modules.
MAX® Faceplates and Mounting Accessories pages 10.2 - 10.7
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.3
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
HD 6 UTP PATCH PANELSCombine category 6 UTP BladePatch® and MC® modular patch cords, MAX® modules, Siemon cable and MAX faceplates for acomplete category 6 channel solution.
Part # Description UHD6-24 . . . . . . . . . 24-port category 6 UTP HD patch panel . . . . 1HD6-48 . . . . . . . . . 48-port category 6 UTP HD patch panel . . . . 2
1
2
3
4
5
Panels include rear cable manager(s), icon label holders, designation labels, cable ties, and mounting hardware.Add “B” for bulk project pack of 5 panels (rear cable managers [p/n: HD-RWM] not included but can be ordered separately).
Note: 1 U = 44.5mm S310 termination blocks are not compatible with S110® multi-pair termination tools.
HD® 6 UTP PATCH PANELS
Abreakthrough in patch panel performance. Siemon’s HD 6 patch panel wasthe industry’s first patch panel to exceed category 6 connecting hardware
specifications for all pair combinations up to 250 MHz. Get superior performanceand user-friendly termination, labelling, and cable management features withSiemon’s popular category 6 HD patch panel.
Universal Wiring — HD 6 patchpanels feature universal wiring for bothT568A/B
Aesthetics — Front surface isuninterrupted by screw heads for aclean appearance
Installer Friendly — Icon labelholders and designation labelsincluded
Port Identification — Bold portnumbering enables quick identificationof outlets
Standard Fit — Panels can bemounted directly on standard 19 inchrelay rack or cabinet
1 4
2
3
5
Cable ManagementIncludes built-in cable manager to properlyguide cables to point of termination.
Circuit ProtectionRear metal enclosure protects printedcircuitry.
Pyramid™ Wire EntrySystemPyramid wire entry system on S310 blocksseparates paired conductors when lacingcables to reduce installation time.
SYSTEM 6® UTP PRODUCTS
4.4 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
High Density Design — Accommodates up to 24ports per U
Aesthetics — Lightweight, high strength brushedaluminium with black protective finish
Installer Friendly — Icon label holders anddesignation labels included
Port Identification — Bold port numbering enablesquick identification of outlets
Standard Fit — Panels can be mounted directly onstandard 19 inch relay rack or cabinet
Versatility — Combines modular design with highdensity for ultimate flexibility
1 4
2
3
5
6
Technical Tip! Use flat MAX modules for patch panel applications.
MAX® PATCH PANELS
MAX patch panels provide a flexible, high density termination solution for thetelecommunications room. Using the full line of MAX modules (available
separately), the panel can be configured for a variety of multimedia applications.Blank modules can be used to reserve ports for future capacity.
Installation FriendlyIndividual modules snap into place fromfront or rear of panel for added installationflexibility.
Designation labelsRemovable designation labels can be laserprinted and enable proper circuitidentification for each port.
Cable ManagementRear Cable management bar included forrouting horizontal cables to terminations.
1
2
3 4
5
6
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.5
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
MAX PANEL ACCESSORIES
MX-PNL-LBL4* . . . . . . . . . 10 sheets of laser printable labels for 16-port MAX panels
MX-PNL-LBL6* . . . . . . . . . 10 sheets of laser printable labels for 24- and 48-port MAX panels
*Visit our web site or contact our Technical Support Department for labelling software.
Part # Description U
Panels include rear cable manager, designation labels, cable ties, and mounting hardware.MAX Panels are not compatible with screened MAX modules. Use the TERA®-MAX panel.Note: 1 U = 44.5mm
MAX® PATCH PANELS
MX-PNL-16 . . . . . . . 16-port MAX patch panel . . . . . .1
Part # Description U
MX-PNL-48 . . . . . . . 48-port MAX patch panel . . . . . .2
MX-PNL-24 . . . . . . . 24-port MAX patch panel . . . . . .1
Blank MAX Modules page 10.3
SYSTEM 6® UTP PRODUCTS
4.6 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
BLADEPATCH 6 UTP MODULAR CORDS
Part # DescriptionBP6-(XX)M-(XX) . . . . . . . . . Category 6, BladePatch double-ended,
4-pair UTP stranded modular cord with push-pull latching design, colour matching cord/boot, T568A/B, CMG
Use 1st (XX) to specify cord length: 01 = 1m, 1.5 = 1.5m, 02 = 2m, 03 = 3m, 05 = 5m, 7.5 = 7.5mUse 2nd (XX) to specify colour: 01 = black, 02 = white, 03 = red, 04 = grey, 05 = yellow, 06 = blue, 07 = green, 09 = orange
Add “B” for bulk project pack of 100 modular cords.
1
2
3
4
5Push-Pull Boot Activates Latch
Universal CompatibilityFits within any standard RJ-45 opening.
Revolutionary LatchSimply push the boot forward to latch intothe outlet and pull back to release.
High DensityThe push-pull design enables easy accessand removal via the boot in tight-fittingareas.
Revolutionary Design — Push-pulllatch design eliminates need to defeatthumb latch used in standard modularplug designs
Easy Access and Removal — RJ-45 patch cord with patent-pendingpush-pull latch design enables easyaccess and removal in high densitypatching environments
Snagless — Push-pull designeliminates external thumb latch whichcan snag and break
Low Profile Boot Design —Optimises side-stackability of patchcords and allows use in even the mostdense equipment
High Density — Ideal for highdensity data centre applications andtoday’s high-density blade servers
1
2
3
4
5
BLADEPATCH® 6 UTPMODULAR CORDS
S iemon’s BladePatch 6 offers a unique category 6 solution for high-densitypatching environments. It features an innovative push-pull boot design to
control the latch, enabling easy access and removal of the cord in tight-fitting areas.The BladePatch cord is ideal for patching blade servers, patch panels, or anyequipment with high density RJ-45 outlets.
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.7
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
Metallic IsolatorPatented metallic isolator shields pairsinside plug for optimum NEXT performance.
Excellent Bend Relief37mm boot ensures excellent bend relief,critical for category 6 performance.
Exceeds Category 6100% transmission testing ensures category6 modular cord specifications andguarantees optimum field performance.
MC 6 UTP MODULAR CORDS
Part # DescriptionMC6-8-T-(XX)M-(XX). . . . . . Category 6 MC, double-ended, 4-pair UTP stranded modular cord,
colour matching jacket/boot, T568A/B, CMG
1 2
3
4
Easy Identification — Optionalcolour-coded icons available for portidentification
Superior Quality — Internalstranded cordage isolator providesextended flex life and maintains idealpair geometry
Latch Guard — Slide on bootsfeature a latch guard to protect plugfrom snagging when pulling throughpathways or cable managers
Durability — High quality modularplugs provide long-term resistance tocorrosion, humidity, extremetemperatures and airbornecontaminants
1
4
2
3
Use 1st (XX) to specify cord length: 01 = 1m, 1.5 = 1.5m, 02 = 2m, 03 = 3m, 05 = 5m, 7.5 = 7.5mUse 2nd (XX) to specify colour: 01 = black, 02 = white, 03 = red, 04 = grey, 05 = yellow, 06 = blue, 07=green, 09 = orange
Add “B” for bulk project pack of 100 modular cords.
MC® 6 UTPMODULAR CORDS
S iemon’s MC 6 modular cords are the key to unlocking the performance ofcategory 6 products. A variety of product enhancements contribute to the
cord’s performance — including 250 MHz rated stranded cordage, a patentedcross-pair isolator and an innovative 360° crimp, which provides excellent plug-to-cable strain relief without causing pair deformation.
SYSTEM 6® UTP PRODUCTS
4.8 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
IC 6 SOLID SINGLE-ENDED MODULAR CORDSSiemon’s category 6 IC solid single-ended modular cords are designed for use in category 6 applications requiring aconsolidation point (CP) or cross-connect (as an equipment cord). The cords are 100% factory transmission tested to 250MHz and feature the same plug construction used in Siemon’s stranded category 6 modular cords. These cords areavailable in CMP and CMR versions and are single-ended for direct termination.
IC6-8A-(XX)M-B(XX). . . . . . Category 6 IC, single-ended, non-plenum, 4-pair UTP solid modular cord, grey jacket with coloured boot, T568B, CMR
IC6-8T-(XX)M-B(XX) . . . . . . Category 6 IC, single-ended, non-plenum, 4-pair UTP solid modular cord, grey jacket with coloured boot, T568A, CMR
MC® 6 VoIP MODULAR CORDSSiemon’s category 6 MC VoIP modular cords are designed for compatibility with today’s VoIP phones. The cords featurea low-profile strain relief boot designed to minimise bend radius and interference when connecting into traditional VoIPwork area phones. All cords are 100% factory transmission tested to 250 MHz.
Part # DescriptionMC6-8T-(XX)M-B01IP. . . . . Category 6 MC, double ended, 4 pair UTP stranded modular cord,
white cord, black boot, T568A/B, CMG
Use 1st (XX) to specify cord length: 03 = 3m, 05 = 5m, 10 = 10m, 15 = 15m, 20 = 20mUse 2nd (XX) to specify colour of boot: 01 = black, 02 = white, 03 = red, 04 = grey, 05 = yellow, 06 = blue, 07 = green, 09 = orange
Use 1st (XX) to specify cord length: 01 = 1m, 1.5 = 1.5m, 02 = 2m, 03 = 3m, 05 = 5m, 7.5 = 7.5m Use 2nd (XX) to specify colour: 01 = black, 02 = white, 03 = red, 04 = grey, 05 = yellow, 06 = blue, 07 = green
S210® TO MC CABLE ASSEMBLIESThe S210 to modular cable assemblies combine Siemon’s high performing plugs for patching network equipment to S210 connectingblocks or providing test access to S210 termination fields. The combination of plugs, high performance cable and 100% factorytransmission testing ensures performance is compatible with category 6 channel specifications.
Part # DescriptionS210P4A4-(XX)M-(XX) . . . . 4-pair, S210P4 to MC 6 stranded cable assembly,
colour matching jacket/boot, T568B, CMGS210P4T4-(XX)M-(XX) . . . . 4-pair, S210P4 to MC 6 stranded cable assembly,
colour matching jacket/boot, T568A, CMGS210P2E2-(XX)M-B(XX) . . . 2-pair, S210P2 to MC 6 stranded cable assembly,
white jacket with coloured boot, 10/100BASE-T, CMG
Use (XX) to specify cord length: 01 = 1m, 1.5 = 1.5m, 02 = 2m, 03 = 3m, 05 = 5m, 7.5 = 7.5m
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.9
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
Internal CrosstalkBarriersProvide superior NEXT performance (13 dB NEXT margin over category 6specifications) via 360° pair isolation.
Pyramid™ Wire EntrySystemSeparates paired conductors when lacingcables to simplify and reduce installationtime.
Cable Access OpeningsAllow cables to be routed through the rearof the block directly to the point oftermination.
S210®
CONNECTION SYSTEM
The Siemon S210 offers the best connecting block performance in thetelecommunications industry. Its NEXT performance is so exceptional that it is
essentially transparent when used as a consolidation point in a category 6 channel.
1
2
34
S210 FIELD TERMINATION KITS Complete S210 installation kits include S210 wiring blocks with detachable legs*, S210connecting blocks, and label holders with white designation labels.
Part # DescriptionS210AB2-64FT . . . . . . . . 64-pair, S210 field termination kit
height: 91.4mm, width: 272mm, depth: 82.8mm
S210AB2-128FT . . . . . . . 128-pair, S210 field termination kitheight: 182.9mm, width: 272mm, depth: 82.8mm
S210AB2-192FT . . . . . . . 192-pair, S210 field termination kitheight: 275mm,width: 272mm, depth: 82.8mm
*Legs detachable on 64-pair version only.
Colored Labels — Designation stripwith interchangeable coloured labelscan be mounted between each row ofconnecting blocksStand-off Legs — Patented stand-offlegs may be detached from the blockbefore, during, or after installation on64-pair version
Compatibility — Utilises samewiring base footprint as standardS110® products to be fully compatiblewith existing S110 mounting andcable management solutionsEasy Termination — Utilises sametermination practices as existing S110product and is compatible with allsingle-position S110 termination tools
1
4
2
3
S110 Test Adapters page 13.4, S210 Multi-Pair Termination Tool page 13.5
SYSTEM 6® UTP PRODUCTS
4.10 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
S210® PATCH PLUGS
The S210 patch plug utilises internal pair isolation, pair-to-pair compensation andlayered contacts to improve cross-talk performance so that the mated plug and
connecting block far exceed category 6 connecting hardware transmissionrequirements. The clear housing keeps the conductor colors/positions visible to aidmatching termination positions on the other end.
1
3
2
4
5
Proper Orientation — Directionalarrow provided to assist in properinsertion orientation
Tapered Lacing — Enable easy fieldtermination
Ergonomic Handle — Aidsinsertion and removal of patch plug
Clear Housing — Durable, flame-retardant, clear thermoplastic housingkeeps conductors visible during andafter termination
Polarisation — Each plug housingincludes polarization features to ensureproper orientation of the plug whenconnecting to the S210 block
1 4
2
3
5
S210 PATCH PLUGSS210 patch plugs can be field-terminated to 23 – 26 AWG (0.40mm – 0.51mm) solid or 7-strand twisted-pair cable.
S210P2 . . . . . . . . . . . . . 2-pair, field-terminated, S210 patch plug
S210P4 . . . . . . . . . . . . . 4-pair, field-terminated, S210 patch plug
S210P1 . . . . . . . . . . . . . 1-pair, field-terminated, S210 patch plug
Use (XX) to specify cord length: 01 = 1m, 1.5 = 1.5m, 02 = 2m, 03 = 3m, 05 = 5m, 7.5 = 7.5mCustom lengths available upon request. Contact our Customer Service Department for more information.
S210 CABLE ASSEMBLIESThe S210 cable assemblies utilise Siemon’s S210P4 patch plugs for easy and reliable connections between S210 termination fields. Theseassemblies use high performance stranded cable which exceeds category 6 specifications and are 100% factory transmission tested toensure optimum category 6 channel performance. Coloured icons are available for colour-coding S210 plugs.
Part # DescriptionS210P4-P4-(XX)M . . . . . . . 4-pair, double-ended, S210 stranded cable assembly, white jacketS210P2-P2-(XX)M . . . . . . . 2-pair, double-ended, S210 stranded cable assembly, white jacketS210P1-P1-(XX)M . . . . . . . 1-pair, double-ended, S210 stranded cable assembly, white jacket
Field InstallableTerminates 24-26 AWG (0.40mm-0.51mm)solid or 7-strand twisted-pair cable.
NEXT PerformanceThe S210 4-pair plug provides unparalleledperformance, with 6.7 dB NEXT (typical)and 2.2 dB NEXT (worst case) at 250 MHz.
Easy TerminationSimply snap the base and cover together tomass terminate all conductors.
Limit
Typical
Worst Case
Margin at 250 MHzWorst Case 2.2 dBTypical 6.7 dB
1 10 100 250
-40
-50
-60
-70
-80
-90
-100
-110
-120
Frequency (MHz)
(dB)
Technical Tip!S210 to MC® 6 cable assemblies can be configured in the field. Siemon MC 6 modular cords can bepurchased and cut in half. The cut end of the cord can then be field terminated to the S210P patch plugwhile the factory terminated and tested modular plug end remains undisturbed.
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.11
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
Data CentresIdeal for Data Centre raised floor andladder rack environments enabling up to75% faster deployment time.
Straight CutTypical installation utilising Straight Cutensures each cable is terminated at theproper length and allows left, right orcentre exit.
Protective PackagingEach assembly is packaged individually toprotect factory terminations.
2
3
45
Proper Orientation — Each leg is labelled forproper module orientation
Siemon Cable — Utilises high quality Siemon cable
Factory Terminated and Tested — Utilises flatUTP MAX modules, factory terminated and tested for highperformance
Identification — Each cable assembly is coded with aunique identification number for administrative purposes
Breakout Kit — Unique breakout kit creates optimalcable orientation and limits cable crossing
1
2
3
4
5
CATEGORY 6 UTPTRUNKING CABLE ASSEMBLIES
S iemon’s category 6 UTP copper trunking cable assemblies provide an efficientand cost effective alternative to individual field-terminated components.
Combining factory terminated and tested UTP MAX® modules with Siemon System 6cable, Siemon copper trunking cable assemblies were designed with data centreapplications in mind. In addition to providing simple and aesthetically pleasingcable management, standard configurations also help maintain consistent cablelayout and facilitate efficient moves, adds and changes. The modular design andreduced scrap of trunk assemblies make them the most “Green” method for category6 cabling.
1
Reeled PackagingUsed for longer length copper trunks.
See ordering information next page
SYSTEM 6® UTP PRODUCTS
4.12 W W W . S I E M O N . C O M
TERA
10G 6A F/UTP
10G 6A UTP
System 6UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies,
Connectors and Cable
Fibre Enclosures and
Splicing Accessories
MapITIntelligent
InfrastructureManagement
Faceplates andMounting
Accessories
Racks andCable
Management
Industrial Products
Tools and Testers
Warranty
CATEGORY 6 TRUNKING CABLE ASSEMBLIESPart # DescriptionTCRD6E-A1A1(XXX)M. . . . System 6, riser rated (CMR), blue jacket, 250MHzTCLD8E-A1A1(XXX)M . . . . System 6, LS0H rated (IEC 60332-1), violet jacket,
250MHz
Use (XXX) to specify length: 003-90m in increments of 1 metre
Standard wiring is T568B.Other lengths and configurations available upon request.
STRAIGHT CUT
Note: These products are made to order. Call for lead time and part number availability in your region.
CALCULATING TRUNK CABLE LENGTHThe illustration below shows how to calculate a trunk cable length in a Data Centre environment, but similar dimensions would beconsidered when using a copper or fiber trunk in a backbone/riser application.
Trunk Cable Length = (A1+A2+A3) + X + (B1+B2+B3)where:
X —Horizontal DistanceA1 —Vertical Distance (side A)A2 —Cable Slack within the cabinet (side A)A3 —Cable Radius transitioning out of the floor (side A)B1 —Vertical Distance (side B)B2 —Cable Slack within the cabinet (side B)B3 —Cable Radius transitioning out of the floor (side B)
SYSTEM 6® UTP PRODUCTS
W W W . S I E M O N . C O M 4.13
TERA
10G 6A F/UTP
10G 6A UTP
System 6 UTP
Premium 5e F/UTP
Premium 5e UTP
Fibre Cable Assemblies, Connectors and Cable
Fibre Enclosures and Splicing Accessories
MapITIntelligentInfrastructureManagement
Faceplates andMounting Accessories
Racks andCable Management
Industrial Products
Tools and Testers
Warranty
SYSTEM 6 UTP 4-PAIR CABLE —INTERNATIONAL
TRANSMISSION PERFORMANCE TIA/EIA & ISO/IEC SIEMON TYPICAL
All performance based on 100 metres.
COMPLIANCE• ISO/IEC 11801:2002 (Category 6)• TIA/EIA-568-B.2-1• IEC 61156-5:2002 (Category 6)• UL CM• UL CMR and CSA FT4• LS0H:IEC 60332-1, IEC 60754,
and IEC 61034
CABLE CONSTRUCTION• UTP• 0.57mm (23 AWG) solid bare copper• 6.35mm max jacket diameter• Central isolation member
Part # Description9C6M4-E3 . . . . . . . . . . . PVC (CM, IEC 60332-1), Grey Jacket,
305m Reel-in-Box9C6L4-E3 . . . . . . . . . . . . LS0H (IEC 60332-1), Violet Jacket,
305m Reel-in-BoxOther cable lengths also available:Add “-5CR” for 500m Reel
Cable Preparation Tool page 13.7
*Values for frequencies above industry requirements are for information only
Frequency Insertion Loss NEXT PS NEXT ACR PSACR ACR-F PS ACR-F Return Loss Propagation(MHz) (dB) (dB) (dB) (dB) (dB) (dB) (dB) (dB) Delay
(ns)
1.0 2.1 1.8 74.3 87.3 72.3 82.3 72.2 85.5 70.2 80.5 67.8 84.8 64.8 79.8 20.0 29.0 570 5454.0 3.8 3.5 65.3 78.3 63.3 73.3 61.4 74.8 59.4 69.8 55.8 72.8 52.8 67.8 23.0 32.0 552 527
10.0 6.0 5.6 59.3 72.3 57.3 67.3 53.3 66.7 51.3 61.7 47.8 64.8 44.8 59.8 25.0 38.0 545 52016.0 7.6 7.1 56.2 69.2 54.2 64.2 48.6 62.1 46.6 57.1 43.7 60.7 40.7 55.7 25.0 34.0 543 51820.0 8.5 7.9 54.8 67.8 52.8 62.8 46.2 59.9 44.2 54.9 41.8 58.8 38.8 53.8 25.0 34.0 542 51731.25 10.8 10.0 51.9 64.9 49.9 59.9 41.1 54.9 39.1 49.9 37.9 54.9 34.9 49.9 23.6 32.0 540 51562.5 15.5 14.4 47.4 60.4 45.4 55.4 31.9 46.0 29.9 41.0 31.9 48.9 28.9 43.9 21.5 32.0 539 514
100.0 19.9 18.6 44.3 57.3 42.3 52.3 24.4 38.7 22.4 33.7 27.8 44.8 24.8 39.8 20.1 32.0 538 513160.0 25.8 24.1 41.2 54.2 39.2 49.2 15.5 30.1 13.5 25.1 23.7 40.7 20.7 35.7 18.7 31.0 537 512200.0 29.0 26.8 39.8 52.8 37.8 47.8 10.6 26.0 8.6 21.0 21.8 38.8 18.8 33.8 18.0 29.0 537 512250.0 33.0 30.5 38.3 51.3 36.3 46.3 5.3 20.8 3.3 15.8 19.8 37.0 16.8 31.8 17.3 29.0 536 511300.0* 36.6 33.7 37.1 50.0 35.1 45.0 0.5 16.3 -1.5 11.3 18.3 36.0 15.3 30.0 16.8 27.0 536 511400.0* 43.0 40.3 35.3 48.0 33.3 43.0 -7.9 7.7 -9.9 2.7 15.8 32.0 12.8 27.0 15.9 26.0 536 511500.0* 48.9 39.9 33.8 48.0 31.8 42.0 -15.4 8.1 -17.4 2.1 13.8 31.0 10.8 26.0 15.2 25.0 536 511550.0* 51.8 39.7 33.2 46.0 31.2 42.0 -18.8 6.3 -20.8 2.3 13.0 30.0 10.0 26.0 14.9 24.0 536 510
LS0H CM
Pulling Tension (max) 110N 110N
Bend Radius (min) 25mm 25mm
Installation Temperature 0 to 60°C 0 to 60°C
Storage Temperature -20 to 75°C -20 to 75°C
Operating Temperature -20 to 60°C -20 to 60°C
PHYSICAL PROPERTIES
DC Resistance <9.38 Ω/100m
DC Resistance Unbalance 5%
Mutual Capacitance 5.6 nF/100m
Capacitance Unbalance <330 pF/100m
Characteristic Impedance 1-100 MHz: 100 ± 15%
(ohms) 100-550 MHz: 100 ± 22%
NVP 68%
TCL 30-10 log(f/100) dB
Delay Skew ≤35ns
ELECTRICAL SPECIFICATIONS