Sysmac is an integrated automation platform that offers complete control and management of your automation systems. Providing simple system architecture, reduced programming and optimised productivity.

The integrated safety system is comprised of the NX-Series safety controller* and safety I/O units, utilising the safety over EtherCAT (FSoE) protocol. True system flexibility is provided for with both Standard I/O and Safe I/O units, which can be used in any combination and can be freely distributed across the entire network.

*Meets PLe according to ISO 13849-1 and SIL3 according to IEC 61508

Would you like to know more? +44 (0) 1908 258 258 uk@eu.omron.com

industrial.omron.co.uk

SYSMAC NJ1 Starter Kit - Safety• NJ1 CPU• NJ series power supply• NX series safety CPU• NX series EtherCAT slave• NX series digital input & output unit• NX series safety input & output unit• 24 V power supply• Sysmac Studio software• Sysmac Studio single user license• Ethernet & USB cables

SYSMAC NJ1 Starter Kit Safety Machine Automation Controller with Integrated Safety, including Sysmac Studio

SPECIAL INTRODUCTORY

OFFER

The NJ1 Machine Controller

Would you like to know more?

Omron Electronics Ltd

Opal Drive, Fox Milne

MK15 0DG Milton Keynes

+44 (0) 1908 258 258 uk@eu.omron.com omron.me/socialmedia_uk

industrial.omron.co.uk

The newly introduced NJ1 controllers further enhance the scalability of the range and are fully compatible with the existing Sysmac Machine Automation Controllers. They share common, dimensions, general specifications, concept and functionality making them ideal for machines with a low number of motion axes or indeed none at all.

*Offer Kit includes :- The NJ101- 1000 controller offering 2 servo axis + 4 virtual axis & the NX-SL3300 Safety CPU providing 256 x Safety I/O pts

SYSMAC STUDIO - One Integrated Development Environment SoftwareSysmac Studio integrates system configuration, programming and monitoring. The graphics-oriented configuration allows quick set-up of the controller, field devices and networks whilst the machine motion & safety programming is based on PLCopen Function Blocks cutting development & programming time. The Smart Editor with On-line debugging helps to enable quick and error free programming together with the advanced simulation of sequence and motion control including data trace reduce machine tuning and set-up time.

Although we strive for perfection, Omron Europe BV and/or its subsidiary and affiliated companies do not warrant or make any representations regarding the correctness or completeness of the information described in this document. We reserve the right to make any changes at any time without prior notice

Safety integration in One software• Integrated Development Environment

in Sysmac Studio provides one common software for hardware configuration, programming and maintenance of the Sysmac platform

• 46 safety FB/FN conforming with IEC 61131- 3 standard programming

• PLCopen Function Blocks for safety

SYSMAC NJ1 Starter Kit Safety – Contents• NJ101-1000 – NJ1 CPU - 3MB Memory - 2 x Servo axes - 64 x EtherCAT nodes) EtherCAT & Ethernet IP ports • NJ-PD3001 - NJ series power supply - 24 VDC, 30 W, RUN” output relay” • NX-ECC202 – NX Series EtherCAT slave – 63 I/O units, supports distributed clock 10A• NX-SL3300 – NX Series Safety CPU - 32 x safety master connections, 256 x safety I/O points, 512KB program capacity • NX-ID4442 – 8 x Digital Inputs PNP 24VDC 12mm wide• NX-OD4256 - 8 x Digital Outputs PNP 24VDC 0.5A/point, 4A/NX Unit, 12mm wide• NX-SID800 - 8 x Safety Inputs PNP 24VDC 12mm wide• NX-SOD400 - 4 x Safety Outputs PNP 24VDC 0.5A/point, 2A/NX Unit, 12mm wide• S8VK-G12024 - Book type power supply, Pro, 120 W, 24VDC, 5A, DIN rail mounting • SYSMAC-SE200D - Sysmac Studio installation DVD - Windows XP or Windows 7/8, 32 or 64-bit • SYSMAC-SE201L - Sysmac Studio single user license • XS6W-6LSZH8SS200CM-Y - Ethernet Cat.6 patch cable, LSZH double shielding (yellow), 2 m • XS6W-6LSZH8SS200CM-B - Ethernet Cat.6 patch cable, LSZH double shielding (Blue), 2 m • CP1W-CN221 - USB Programming cable, A-type male to B-type male, 1.8 m

The Sysmac NJ1 Starter Kit Safety Offer is limited to 1 x kit per customer. Omron do not warrant or make any representation regarding the correctness of the information in this document. We reserve the right to make any changes at any time without prior notice, with reservations for misprints. We refer to our valid terms of delivery. Carriage charges may apply.