Upload
juan-fernando-villa
View
217
Download
0
Embed Size (px)
DESCRIPTION
dfgdf
Citation preview
Spring 2001 MCE 341: Fundamentals of Thermodynamics
Spring 2015 MCE 341: Fundamentals of Thermodynamics
TEXT: Fundamentals of Engineering Thermodynamics, 7th Edit, By Moran et al.INSTRUCTOR: Dr. Ing. Andrew Marchesseault, OFFICE: Email: [email protected],
Weeks
SUBJECT
READINGS ASSIGNMENT1.
Introduction
Chapter 1
2.
1st Law in Closed System
Chapter 227, 33, 77, 843.
Property Relations
Chapter 310, 23, 39, 50,57,66,109,135
Test#1 (chapters 1-3)
4
Property Relations, C. VolumeChapter 3,412, 37,50,68,75,102.1075
Control Volume
Chapter 4
6
Control Volume
Chapter 4
7
2nd Law Concepts
Chapter 520, 37, 46, 53, 58, 61,63
Test#2 (chapter 4)
8
2nd Law Concepts
Chapter 59
2nd Law Concepts & AnalysesChapter 6
10
2nd Law Analyses
Chapter 635,49,52,59,81,115,130,14311
2nd Law Analyses
Chapter 6
Test#3 (chapters 5-6)
Gas-Cycles
12
Gas and Vapor-Powered CyclesChapter 8,
13
Vapor-Powered cycles
Chapter 9
14
Refrigeration and Heat PumpChapter 10
Test#4 (all chapters)
There will be four one-hour tests and no final exam.
Four one-hour Tests
25% each
Note:
All tests/exam requires independent work. No make-up tests !!! Unless the missing of the tests are due to the necessary URI sanctioned travel (pre-approved by provost office). You may skip the tests, but Test #4 is mandatory. The weight of the missing exam(s) will be shifted to Test #4.
Computers and cell phones are not allowed in tests. During the exam, instructors will only answer questions related to the problem statement, not how to solve the problem. Home work will not be graded. Group discussions are welcome for homework assignment. Many of the class announcements will be made through the Sakai email. Please keep your email address updated.
Print out the PPT lecture materials and take reasonably clear lecture notes on the print out. DO (not read) book, blackboard and homework problems before taking the exam. Please ask questions inside and outside class!
Watch units and dimensions on all numerical problems.
Be sure you know the assumptions and restrictions of all equations you use - one-dimensional, steady, constant thermal properties, idea gas, open or closed system, etc.