SIKSHA O ANUSANDHAN

SYLLABUS FOR SAAT 2019

SOADU 11/21/2018

Contents SYLLABUS FOR (B.TECH. / B.PHARM. / B.SC. NURSING / B.Sc. AGRICULTURE) ........................................ 1

SYLLABUS FOR LATERAL ENTRY (B.TECH)................................................................................................ 10

SYLLABUS FOR LATERAL ENTRY FOR B.PHARM ...................................................................................... 12

SYLLABUS FOR LATERAL ENTRY FOR BHMCT .......................................................................................... 12

SYLLABUS FOR MCA ................................................................................................................................ 12

SYLLABUS FOR BACHELOR IN HOTEL MANAGEMENT & CATERING TECHNOLOGY ................................ 13

SYLLABUS FOR MBA / MHA / MHM / M.SC. (ALL) COURSES .................................................................. 13

SYLLABUS FOR M.PHARM. ...................................................................................................................... 14

SYLLABUS FOR M.TECH. .......................................................................................................................... 14

ELECTRONICS AND COMMUNICATION (COMMUNICATION SYSTEM ENGINEERING) ........................ 14

MECHANICAL ENGINEERING (Heat Power & Thermal Engineering) ................................................... 16

ELECTRICAL ENGINEERING (POWER SYSTEMS & POWER ELECTRONICS) ........................................... 17

COMPUTER SCIENCE & ENGINEERING ................................................................................................ 18

CIVIL ENGINEERING (STRUCTURAL ENGINEERING) ............................................................................ 19

SYLLABUS FOR M.SC. AGRICULTURE ....................................................................................................... 20

SYLLABUS FOR M.SC. NURSING............................................................................................................... 21

SYLLABUS FOR P.B.B.Sc. NURSING .......................................................................................................... 21

SYLLABUS FOR B.A. LLB (H) / B.B.A. LLB (H) / LL.B (H) / BBA / BCA ........................................................ 22

SYLLABUS FOR LLM ................................................................................................................................. 22

SYLLABUS FOR MCA LATERAL ENTRY ...................................................................................................... 22

1

SYLLABUS FOR (B.TECH. / B.PHARM. / B.SC. NURSING / B.Sc. AGRICULTURE) (A) PHYSICS

UNIT 1: PHYSICS AND MEASUREMENT

Physics, technology and society, S I units, Fundamental and derived units. Least count, accuracy and

precision of measuring instruments, Errors in measurement, Dimensions of Physical quantities, dimensional

analysis and its applications.

UNIT 2: KINEMATICS

Frame of reference. Motion in a straight line: Position-time graph, speed and velocity. Uniform and

nonuniform motion, average speed and instantaneous velocity Uniformly accelerated motion, velocity-

time, position-time graphs, relations for uniformly accelerated motion. Scalars and Vectors, Vector addition

and Subtraction, Zero Vector, Scalar and Vector products, Unit Vector, Resolution of a Vector. Relative

Velocity, Motion in a plane, Projectile Motion, Uniform Circular Motion.

UNIT 3: LAWS OF MOTION

Force and Inertia, Newton's First Law of motion; Momentum, Newton's Second Law of motion; Impulse;

Newton's Third Law of motion. Law of conservation of linear momentum and its applications, Equilibrium of

concurrent forces. Static and Kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular

motion: Centripetal force and its applications.

UNIT 4: WORK, ENERGY AND POWER

Work done by a constant force and a variable force; kinetic and potential energies, workenergy theorem,

power. Potential energy of a spring, conservation of mechanical energy, conservative and

nonconservative forces; Elastic and inelastic collisions in one and two dimensions.

UNIT 5: ROTATIONAL MOTION

Centre of mass of a two-particle system, Centre of mass of a rigid body; Basic concepts of rotational

motion; moment of a force, torque, angular momentum, conservation of angular momentum and its

applications; moment of inertia, radius of gyration. Values of moments of inertia for simple geometrical

objects, parallel and perpendicular axes theorems and their applications. Rigid body rotation, equations of

rotational motion.

UNIT 6: GRAVITATION

The universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth.

Kepler's laws of planetary motion. Gravitational potential energy; gravitational potential. Escape velocity.

Orbital velocity of a satellite. Geo-stationary satellites.

UNIT 7: PROPERTIES OF SOLIDS AND LIQUIDS

Elastic behaviour, Stress-strain relationship, Hooke's Law, Young's modulus, bulk modulus, modulus of rigidity.

Pressure due to a fluid column; Pascal's law and its applications. Viscosity, Stokes' law, terminal velocity,

streamline and turbulent flow, Reynolds number. Bernoulli's principle and its applications. Surface energy

and surface tension, angle of contact, application of surface tension - drops, bubbles and capillary rise.

Heat, temperature, thermal expansion; specific heat capacity, calorimetry; change of state, latent heat.

Heat transferconduction, convection and radiation, Newton's law of cooling.

UNIT 8: THERMODYNAMICS

Thermal equilibrium, zeroth law of thermodynamics, concept of temperature. Heat, work and internal

energy. First law of thermodynamics. Second law of thermodynamics: reversible and irreversible processes.

Carnot engine and its efficiency.

UNIT 9: KINETIC THEORY OF GASES

Equation of state of a perfect gas, work doneon compressing a gas.Kinetic theory of gases - assumptions,

concept of pressure. Kinetic energy and temperature: rms speed of gas molecules; Degrees of freedom,

Law of equip artition of energy, applications to specific heat capacities of gases; Mean free path,

Avogadro's number.

UNIT 10: OSCILLATIONS AND WAVES

Periodic motion - period, frequency, displacement as a function of time. Periodic functions. Simple

harmonic motion (S.H.M.) and its equation; phase; oscillations of a spring -restoring force and force

constant; energy in S.H.M. - kinetic and potential energies; Simple

pendulum - derivation of expression for its time period; Free, forced and damped oscillations, resonance.

Wave motion. Longitudinal

2

and transverse waves, speed of a wave. Displacement relation for a progressive wave. Principle of

superposition of waves, reflection of waves, Standing waves in strings and organ pipes, fundamental mode

and harmonics, Beats, Doppler effect in sound.

UNIT 11: ELECTROSTATICS

Electric charges: Conservation of charge, Coulomb's law-forces between two point charges, forces

between multiple charges; superposition principle and continuous charge distribution. Electric field: Electric

field due to a point charge, Electric field lines, Electric dipole, Electric field due to a dipole, Torque on

adipole in a uniform electric field. Electric flux, Gauss's law and its applications to find field due to infinitely

long uniformly charged straight wire, uniformly charged infinite plane sheet and uniformly charged thin

spherical shell. Electric potential and its calculation for a point charge, electric dipole and system of

charges; Equipotential surfaces, Electrical potential energy of a system of two point charges in an

electrostatic field. Conductors and insulators, Dielectrics and electric polarization, capacitor, combination

of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric

medium between the plates, Energy stored in a capacitor.

UNIT 12: CURRRENT ELECTRICITY

Electric current, Drift velocity, Ohm's law, Electrical resistance, Resistances of different materials, V-I

characteristics of Ohmic and nonohmic conductors, Electrical energy and power, Electrical resistivity,

Colour code for resistors; Series and parallel combinations of resistors; Temperature dependence of

resistance. Electric Cell and its Internal resistance, potential difference and emf of a cell, combination of

cells in series and in parallel. Kirchhoff's laws and their applications. Wheatstone bridge, Metre bridge.

Potentiometer - principle and its applications.

UNIT 13: MAGNETIC EFFECTS OF CURRENT AND MAGNETISM

Biot - Savart law and its application to current carrying circular loop. Ampere's law and its applications to

infinitely long current carrying straight wire and solenoid. Force on a moving charge in uniform magnetic

and electric fields. Cyclotron. Force on a current-

carrying conductor in a uniform magnetic field. Force between two parallel current- carrying conductors-

definition of ampere. Torque experienced by a current loop in uniform magnetic field; Moving coil

galvanometer, its current sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic

dipole and its magnetic dipole moment. Bar magnet as an equivalent solenoid, magnetic field lines; Earth's

magnetic field and magnetic elements. Para-, dia- and ferro- magnetic substances. Magnetic

susceptibility and permeability, Hysteresis, Electromagnets and permanent magnets.

UNIT 14: ELECTROMAGNETIC INDUCTION AND ALTERNATING CURRENTS

Electromagnetic induction; Faraday's law, induced emf and current; Lenz's Law, Eddy currents. Self and

mutual inductance. Alternating currents, peak and rms value of alternating current/ voltage; reactance

and impedance; LCR series circuit, resonance; Quality factor, power in AC circuits, wattless current. AC

generator and transformer.

UNIT 15: ELECTROMAGNETIC WAVES

Electromagnetic waves and their characteristics. Transverse nature of electromagnetic waves.

Electromagnetic spectrum (radio waves, micro waves, infrared, visible, ultraviolet, Xrays, gamma rays).

Applications of e.m. waves. Reflection and refraction of light at plane and spherical surfaces, mirror

formula, Total internal reflection and its applications, Deviation and Dispersion of light by a prism, Lens

Formula, Magnification, Power of a Lens, Combination of thin lenses in contact, Microscope and

Astronomical Telescope (reflecting and refracting) and their magnifyingpowers. Wave optics: wavefront

and Huygens' principle, Laws of reflection and refraction using Huygen's principle. Interference, Young's

double slit experiment and expression for fringe width. Diffraction due to a single slit, width of central

maximum. Resolving power of microscopes and astronomical telescopes, Polarisation, plane polarized

light; Brewster's law, uses of plane polarized light and Polaroids.

UNIT 16: DUAL NATURE OF MATTER ANDRADIATION

Dual nature of radiation. Photoelectric effect, Hertz and Lenard's observations; Einstein's photoelectric

equation; particle nature of light. Matter waves-wave nature of particle, de Broglie relation.

DavissonGermer experiment.

UNIT 17: ATOMS AND NUCLEI

Alpha-particle scattering experiment; Rutherford's model of atom; Bohr model, energy levels, hydrogen

spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones. Radioactivity-alpha,

beta and gamma particles/rays and their properties; radioactive decay law. Mass-energy relation, mass

defect; binding energy per nucleon and its variation with mass number, nuclear fission and fusion.

3

UNIT 18: ELECTRONIC DEVICES

Semiconductors; semiconductor diode: I-V characteristics in forward and reverse bias; diode as a rectifier;

I-V characteristics of LED, photodiode, solar cell and Zener diode; Zener diode as a voltage regulator.

Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter

configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.

UNIT 19: COMMUNICATION SYSTEMS

Propagation of electromagnetic waves in the atmosphere; Sky and space wave propagation, Need for

modulation, Amplitude and Frequency Modulation, Bandwidth of signals, Bandwidth of Transmission

medium, Basic Elements of a Communication System (Block Diagram only).

B. CHEMISTRY

PHYSICAL CHEMISTRY

UNIT 1: SOME BASIC CONCEPTS IN CHEMISTRY

Matter and its nature, Dalton's atomic theory; Concept of atom, molecule, element and compound;

Physical quantities and their measurements in Chemistry, precision and accuracy, significant figures, S.I.

Units, dimensional analysis; Laws of chemical combination; Atomic and molecular masses, mole concept,

molar mass, percentage composition, empirical and molecular formulae; Chemical equations and

stoichiometry.

UNIT 2: STATES OF MATTER

Classification of matter into solid, liquid and gaseous states. Gaseous State:Measurable properties of gases;

Gas laws - Boyle's law, Charle's law, Graham's law of diffusion, Avogadro's law, Dalton's law of partial

pressure; Concept of Absolute scale of temperature; Ideal gas equation; Kinetic theory of gases (only

postulates); Concept of average, root mean square and most probable velocities; Real gases, deviation

from Ideal behaviour, compressibility factor and van der Waals equation. Liquid State: Properties of liquids -

vapour pressure, viscosity and surface tension and effect of temperature on them (qualitative treatment

only). Solid State: Classification of solids: molecular, ionic, covalent and metallic solids, amorphous and

crystalline solids (elementary idea); Bragg's Law and its applications; Unit cell and lattices, packing in solids

(fcc, bcc and hcp lattices), voids, calculations involving unit cell parameters, imperfection in solids;

Electrical, magnetic and dielectric properties.

UNIT 3: ATOMIC STRUCTURE

Thomson and Rutherford atomic models and their limitations; Nature of electromagnetic radiation,

photoelectric effect; Spectrum of hydrogen atom, Bohr model of hydrogen atom - its postulates, derivation

of the relations for energy of the electron and radii of the different orbits, limitations of Bohr's model; Dual

nature of matter, de-Broglie's relationship, Heisenberg uncertainty principle. Elementary ideas of quantum

mechanics, quantum mechanical model of atom, its important features, concept of atomic orbitals as one

electron wave functions; Variation of and 2, with r for 1s and 2s orbitals; various quantum numbers

(principal, angular momentum and magnetic quantum numbers) and their significance; shapes of s, p and

d - orbitals, electron spin and spin quantum number; Rules for filling electrons in orbitals - aufbau principle,

Pauli's exclusion principle and Hund's rule, electronic configuration of elements, extra stability of half-filled

and completely filled orbitals.

UNIT 4: CHEMICAL BONDING AND MOLECULAR STRUCURE

Kossel - Lewis approach to chemical bond formation, concept of ionic and covalent bonds. Ionic Bonding:

Formation of ionic bonds, factors affecting the formation of ionic bonds; calculation of lattice enthalpy.

Covalent Bonding: Concept of electronegativity, Fajan's rule, dipole moment; Valence Shell Electron Pair

Repulsion (VSEPR) theory and shapes of simple molecules. Quantum mechanical approach to covalent

bonding: Valence bond theory - Its important features, concept of hybridization involving s, p and d

orbitals; Resonance. Molecular Orbital Theory - Its important features, LCAOs, types of molecular orbitals

(bonding, antibonding), sigma and pi-bonds, molecular orbital electronic configurations of homonuclear

diatomic molecules, concept of bond order, bond length and bond energy. Elementary idea of metallic

bonding. Hydrogen bonding and its applications.

UNIT 5: CHEMICAL THERMODYNAMICS

Fundamentals of thermodynamics: System and surroundings, extensive and intensive properties, state

functions, types of processes. First law of thermodynamics- Concept of work, heat internal energy and

enthalpy, heat capacity, molar heat capacity; Hess's law of constant heat summation; Enthalpies of bond

dissociation, combustion, formation, atomization, sublimation, phase transition, hydration, ionization and

solution. Second law of thermodynamics; Spontaneity of processes; S of the universe and G of the system

as criteria for spontaneity, G0 (Standard Gibbs energy change) and equilibrium constant.

4

UNIT 6: SOLUTIONS

Different methods for expressing concentration of solution - molality, molarity, mole fraction, percentage

(by volume and mass both), vapour pressure of solutions and Raoult's Law - Ideal and non-ideal solutions,

vapour pressure - composition, plots for ideal and non-ideal solutions; Colligative properties of dilute

solutions - relative lowering of vapour pressure, depression of freezing point, elevation of boiling point and

osmotic pressure; Determination of molecular mass using colligative properties; Abnormal value of molar

mass, van't Hoff factor and its significance.

UNIT 7: EQUILIBRIUM

Meaning of equilibrium, concept of dynamic equilibrium. Equilibria involving physical processes:Solid -liquid,

liquid - gas and solid - gas equilibria, Henry's law, general characterics of equilibrium involving physical

processes. Equilibria involving chemical processes:

Law of chemical equilibrium, equilibrium constants (Kp and Kc) and their significance, significance of G

and Go in chemical equilibria, factors affecting equilibrium concentration, pressure, temperature, effect of

catalyst; Le Chatelier's principle. Ionic equilibrium: Weak and strong electrolytes, ionization of electrolytes,

various concepts of acids and bases (Arrhenius, Brnsted - Lowry and Lewis) and their ionization, acid - base

equilibria (including multistage ionization) and ionization constants, ionization of water, pH scale, common

ion effect, hydrolysis of salts and pH of their solutions, solubility of sparingly soluble salts and solubility

products, buffer solutions.

UNIT 8: REDOX REACTIONS AND ELECTROCHEMISTRY

Electronic concepts of oxidation and reduction, redox reactions, oxidation number, rules for assigning

oxidation number, balancing of redox reactions. Eectrolytic and metallic conduction, conductance in

electrolytic solutions, specific and molar conductivities and

their variation with concentration: Kohlrausch's law and its applications. Electrochemical cells - Electrolytic

and Galvanic cells, different types of electrodes, electrode potentials including standard electrode

potential, half - cell and cell reactions, emf of a Galvanic cell and its measurement; Nernst equation and its

applications; Relationship between cell potential and Gibbs' energy change; Dry cell and lead

accumulator; Fuel cells.

UNIT 9 : CHEMICAL KINETICS

Rate of a chemical reaction, factors affecting the rate of reactions: concentration, temperature, pressure

and catalyst; elementary and complex reactions, order and molecularity of reactions, rate law, rate

constant and its units, differential and integral forms of zero and first order reactions, their characteristics

and half - lives, effect of temperature on rate of reactions - Arrhenius theory, activation energy and its

calculation, collision theory of bimolecular gaseous reactions (no derivation).

UNIT-10 : SURFACE CHEMISTRY

Adsorption- Physisorption and chemisorption and their characteristics, factors affecting adsorption of gases

on solids - Freundlich and Langmuir adsorption isotherms, adsorption from solutions. Colloidal state -

distinction among true solutions, colloids and suspensions, classification of colloids - lyophilic, lyophobic;

multi molecular, macromolecular and associated colloids (micelles), preparation and properties of colloids

- Tyndall effect, Brownian movement, electrophoresis, dialysis, coagulation and flocculation; Emulsions and

their characteristics.

INORGANIC CHEMISTRY

UNIT 11: CLASSIFICATON OF ELEMENTS AND PERIODICITY IN PROPERTIES

Modem periodic law and present form of the periodictable, s, p, d and f block elements, periodic trends in

properties of elements atomic and ionic radii, ionization enthalpy, electron gain enthalpy, valence,

oxidation states and chemical reactivity.

UNIT 12: GENERAL PRINCIPLES AND PROCESSES OF ISOLATION OF METALS

Modes of occurrence of elements in nature, minerals, ores; Steps involved in the extraction of metals -

concentration, reduction (chemical and electrolytic methods) and refining with special reference to the

extraction of Al, Cu, Zn and Fe; Thermodynamic and electrochemical principles involved in the extraction

of metals.

UNIT 13: HYDROGEN

Position of hydrogen in periodic table, isotopes, preparation, properties and uses of hydrogen; Physical and

chemical properties of water and heavy water; Structure, preparation, reactions and uses of hydrogen

peroxide; Hydrogen as a fuel.

5

UNIT 14: S - BLOCK ELEMENTS (ALKALI AND ALKALINE EARTH METALS)

Group - 1 and 2 Elements General introduction, electronic configuration and general trends in physical and

chemical properties of elements, anomalous properties of the first element of each group, diagonal

relationships. Preparation and properties of some important compounds - sodium carbonate and sodium

hydroxide; Industrial uses of lime, limestone, Plaster of Paris and cement; Biological significance of Na, K, Mg

and Ca.

UNIT 15: P - BLOCK ELEMENTS

Group - 13 to Group 18 Elements General Introduction: Electronic configuration and general trends in

physical and chemical properties of elements across the periods and down the groups; unique behaviour

of the first element in each group. Groupwise study of the p - block elements Group - 13 Preparation,

properties and uses of boron and aluminium; properties of boric acid, diborane, boron trifluoride,

aluminium chloride and alums. Group - 14 Allotropes of carbon, tendency for catenation; Structure &

properties of silicates, and zeolites. Group - 15 Properties and uses of nitrogen and phosphorus; All otrophic

forms of phosphorus; Preparation, properties, structure and uses of ammonia, nitric acid, phosphine and

phosphorus halides, (PCl3, PCl5); Structures of oxides and oxoacids of phosphorus. Group - 16 Preparation,

properties, structures and uses of ozone; Allotropic forms of sulphur; Preparation, properties, structures and

uses of sulphuric acid (including its industrial preparation); Structures of oxoacids of sulphur. Group - 17

Preparation, properties and uses of hydrochloric acid; Trends in the acidic nature of hydrogen halides;

Structures of Interhalogen compounds and oxides and oxoacids of halogens. Group -18 Occurrence and

uses of noble gases; Structures of fluorides and oxides of xenon.

UNIT 16: d - and f - BLOCK ELEMENTS

Transition Elements General introduction, electronic configuration, occurrence and characteristics, general

trends in properties of the first row transition elements - physical properties, ionization enthalpy, oxidation

states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial

compounds, alloy formation; Preparation, properties and uses of K2Cr2O7 and KMnO4 Inner

Transition Elements Lanthanoids - Electronic configuration, oxidation states and lanthanoid contraction.

Actinoids -Electronic configuration and oxidation states.

UNIT 17: CO-ORDINATION COMPOUNDS

Introduction to co-ordination compounds, Werner's theory; ligands, co-ordination number, denticity,

chelation; IUPAC nomenclature of mononuclear co-ordination compounds, isomerism; Bonding-Valence

bond approach and basic ideas of Crystal field theory, colour and magnetic properties; Importance of co-

ordination compounds (in qualitative analysis, extraction of metals and in biological systems).

UNIT 18: ENVIRONMENTAL CHEMISTRY

Environmental pollution - Atmospheric, water and soil. Atmospheric pollution- Tropospheric and

Stratospheric Tropospheric pollutants - Gaseous pollutants: Oxides of carbon, nitrogen and sulphur,

hydrocarbons; their sources, harmful effects and prevention; Green house effect and Global warming;

Acid rain; Particulate pollutants: Smoke, dust, smog, fumes, mist; their sources, harmful effects and

prevention. Stratospheric pollution-Formation and breakdown of ozone, depletion of ozone layer - its

mechanism and effects. Water Pollution -Major pollutants such as, pathogens, organic wastes and

chemical pollutants; their harmful effects and prevention. Soil pollution - Major pollutants such as: Pesticides

(insecticides,. herbicides and fungicides), their harmful effects and prevention. Strategies to control

environmental pollution.

ORGANIC CHEMISTRY

19: PURIFICATION AND CHARACTERISATION OF ORGANIC COMPOUNDS

Purification - Crystallization, sublimation, distillation, differential extraction and chromatography - principles

and their applications. Qualitative analysis - Detection of nitrogen, sulphur, phosphorus and halogens.

Quantitative analysis (basic principles only) - Estimation of carbon, hydrogen, nitrogen, halogens, sulphur,

phosphorus. Calculations of empirical formulae and molecular formulae; Numerical problems in organic

quantitative analysis.

UNIT 20: SOME BASIC PRINCIPLES OF ORGANIC CHEMISTRY

Tetravalency of carbon; Shapes of simple molecules - hybridization (s and p); Classification of organic

compounds based on functional groups: - C = C - , - C h C - and those containing halogens, oxygen,

nitrogen and sulphur; Homologous series; Isomerism structural and stereoisomerism. Nomenclature (Trivial

and IUPAC) Covalent bond fission - Homolytic and heterolytic: free radicals, carbocations and carbanions;

stability of carbocations and free radicals, electrophiles and nucleophiles. Electronic displacement in a

6

covalent bond -Inductive effect, electromeric effect, resonance and hyperconjugation. Common types of

organic reactions : substitution, addition, elimination and rearrangement.

UNIT 21: HYDROCARBONS

Classification, isomerism, IUPAC nomenclature, general methods of preparation, properties and reactions.

Alkanes - Conformations: Sawhorse and Newman projections (ofethane); Mechanism of halogenation of

alkanes. Alkenes - Geometrical isomerism; Mechanism of electrophilic addition: addition of hydrogen,

halogens, water, hydrogen halides (Markownikoff's and peroxide effect); Ozonolysis and polymerization.

Alkynes - Acidic character; Addition of hydrogen, halogens, water and hydrogen halides; Polymerization.

Aromatic hydrocarbons - Nomenclature, benzene - structure and aromaticity; Mechanism of electrophilic

substitution: halogenation, nitration, Friedel - Craft's alkylation and acylation, directive influence of

functional group in mono-substituted benzene.

UNIT 22: ORGANIC COMPOUNDS CONTAINING HALOGENS

General methods of preparation, properties and reactions; Nature of C-X bond; Mechanisms of substitution

reactions.Uses; Environmental effects of chloroform & iodoform.

UNIT 23: ORGANIC COMPOUNDS CONTAINING OXYGEN

General methods of preparation, properties, reactions and uses.

ALCOHOLS, PHENOLS AND ETHERS Alcohols:

Identification of primary, secondary and tertiary alcohols; mechanism of dehydration. Phenols: Acidic

nature, electrophilic substitution reaction s: halogenation, nitration and sulphonation, Reimer - Tiemann

reaction. Ethers: Structure. Aldehyde and Ketones: Nature of carbonyl group;Nucleophilic addition to

>C=O group, relative reactivities of aldehydes and ketones; Important reactions such as - Nucleophilic

addition reactions (addition of HCN, NH3 and its derivatives), Grignard reagent; oxidation; reduction (Wolff

Kishner and Clemmensen); acidity of - hydrogen, aldol condensation, Cannizzaro reaction, Haloform

reaction; Chemical tests to distinguish between aldehydes and Ketones.

CARBOXYLIC ACIDS

Acidic strength and factors affecting it.

UNIT 24: ORGANIC COMPOUNDS CONTAINING NITROGEN

General methods of preparation, properties, reactions and uses. Amines: Nomenclature, classification,

structure, basic character and identification of primary, secondary and tertiary amines and their basic

character. Diazonium Salts: Importance in synthetic organic chemistry.

UNIT 25: POLYMERS

General introduction and classification of polymers, general methods of polymerization- addition and

condensation, copolymerization; Natural and synthetic rubber and vulcanization; some important polymers

with emphasis on their monomers and uses - polythene, nylon, polyester and bakelite.

UNIT 26: BIOMOLECULES

General introduction and importance of biomolecules .

CARBOHYDRATES - Classification: aldoses and ketoses; monosaccharides (glucose and fructose) and

constituent monosaccharides of oligos acchorides (sucrose, lactose and maltose).

PROTEINS - Elementary Idea of - amino acids, peptide bond, polypeptides; Proteins: primary, secondary,

tertiary and quaternary structure (qualitative idea only), denaturation of proteins, enzymes.

VITAMINS - Classification and functions.

NUCLEIC ACIDS -

Chemical constitution of DNA and RNA. Biological functions of nucleic acids.

UNIT 27: CHEMISTRY IN EVERYDAY LIFE

Chemicals in medicines - Analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs,

antibiotics, antacids, antihistamins - their meaning and common examples. Chemicals in food -

Preservatives, artificial sweetening agents - common examples. Cleansing agents - Soaps and detergents,

cleansing action.

(C) Mathematics

UNIT 1 : SETS, RELATIONS AND FUNCTIONS:

Sets and their representation; Union, intersection and complement of sets and their algebraic properties;

Power set; Relation, Types of relations, equivalence relations,functions;. oneone, into and onto functions,

composition of functions.

7

UNIT 2 : COMPLEX NUMBERS AND QUADRATIC EQUATIONS:

Complex numbers as ordered pairs of reals, Representation of complex numbers in the form a+ib and their

representation in a plane, Argand diagram, algebra of complex numbers, modulus and argument (or

amplitude) of a complex number, square root of a

complex number, triangle inequality, Quadratic equations in real and complex number system and their

solutions. Relation between roots and coefficients, nature of roots, formation of quadratic equations with

given roots.

UNIT 3 : MATRICES AND DETERMINANTS:

Matrices, algebra of matrices, types of matrices, determinants and matrices of order two and three.

Properties of determinants, evaluation of determinants, area of triangles using determinants. Adjoint and

evaluation of inverse of a square matrix using determinants and elementary transformations, Test of

consistency and solution of simultaneous linear equations in two or three variables using determinants and

matrices.

UNIT 4 : PERMUTATIONS AND COMBINATIONS:

Fundamental principle of counting, permutation as an arrangement and combination as selection,

Meaning of P (n,r) and C (n,r), simple applications.

UNIT 5 : MATHEMATICAL INDUCTION:

Principle of Mathematical Induction and its simple applications.

UNIT 6 : BINOMIAL THEOREM AND ITS SIMPLE APPLICATIONS:

Binomial theorem for a positive integral index, general term and middle term,properties of Binomial

coefficients and simple applications.

UNIT 7 : SEQUENCES AND SERIES:

Arithmetic and Geometric progressions, insertion of arithmetic, geometric means between two given

numbers. Relation between A.M. and G.M. Sum upto n terms of special series: S n, S n2, Sn3. Arithmetico -

Geometric progression.

UNIT 8 : LIMIT, CONTINUITY AND DIFFERENTIABILITY:

Real valued functions, algebra of functions, polynomials, rational, trigonometric, logarithmic and

exponential functions, inverse functions. Graphs of simple functions. Limits, continuity and differentiability.

Differentiation of the sum, difference, product and quotient of two functions. Differentiation of

trigonometric, inverse trigonometric, logarithmic, exponential, composite and implicit functions; derivatives

of order upto two. Rolle's and Lagrange's Mean Value Theorems. Applications of derivatives: Rate of

change of quantities, monotonic increasing and decreasing functions, Maxima and minima of functions of

one variable, tangents and normals.

UNIT 9 : INTEGRAL CALCULUS:

Integral as an anti derivative. Fundamental integrals involving algebraic, trigonometric, exponential and

logarithmic functions. Integration by substitution, by parts and by partial fractions. Integration using

trigonometric identities. Evaluation of simple integrals of the type

2 2 2 22 2

22 2

22 2

2 2 2 2

, , ,

,

, ,

dx dx dx

x a a xx a

dx dx

ax bx ca x

px q dx px q dxdx

ax bx cax bx c ax bx c

a x dx x a dx

8

Integral as limit of a sum. Fundamental Theorem of Calculus. Properties of definite integrals. Evaluation of

definite integrals, determining areas of the regions bounded by simple curves in standard form.

UNIT 10: DIFFERENTIAL EQUATIONS:

Ordinary differential equations, their order and degree. Formation of differential equations. Solution of

differential equations by the method of separation of variables, solution of homogeneous and linear

differential equations of the type:

dy

p x y q xdx

UNIT 11: COORDINATE GEOMETRY:

Cartesian system of rectangular coordinates in a plane, distance formula, section formula, locus and its

equation, translation of axes, slope of a line, parallel and perpendicular lines, intercepts of a line on the

coordinate axes. Straight lines Various forms of equations of a line, intersection of lines, angles between two

lines, conditions for concurrence of three lines, distanceof a point from a line, equations of internal and

external bisectors of angles between two lines, coordinates of centroid, orthocentre and circumcentre of a

triangle, equation of family of lines passing through the point of intersection of two lines. Circles, conic

sections Standard form of equation of a circle, general form of the equation of a circle, its radius and

centre, equation of a circle when the end points of a diameter are given, points of intersection of a line

and a circle with the centre at the origin and condition for a line to be tangent to a circle, equation of the

tangent. Sections of cones, equations of conic sections (parabola, ellipse and hyperbola) in standard

forms, condition for y = mx + c to be a tangent and point (s) of tangency.

UNIT 12: THREE DIMENSIONAL GEOMETRY:

Coordinates of a point in space, distance between two points, section formula, direction ratios and

direction cosines, angle between two intersecting lines. Skew lines, the shortest distance between them

and its equation. Equations of a line and a plane in different forms, intersection of a line and a plane,

coplanar lines.

UNIT 13: VECTOR ALGEBRA:

Vectors and scalars, addition of vectors, components of a vector in two dimensions and three dimensional

space, scalar and vector products, scalar and vector triple product.

UNIT 14: STATISTICS AND PROBABILITY:

Measures of Dispersion: Calculation of mean, median, mode of grouped and ungrouped data calculation

of standard deviation, variance and mean deviation for grouped and ungrouped data. Probability:

Probability of an event, addition and multiplication theorems of probability, Baye's theorem, probability

distribution of a random variate, Bernoulli trials and Binomial distribution.

UNIT 15: TRIGONOMETRY:

Trigonometrical identities and equations. Trigonometrical functions. Inverse trigonometrical functions and

their properties. Heights and Distances.

UNIT 16: MATHEMATICAL REASONING:

Statements, logical operations and, or, implies, implied by, if and only if. Understanding of tautology,

contradiction, converse and contrapositive.

(D) BIOLOGY (A-BOTANY)

Unit–I : History

History, botanical studies, branches of botany, brief classification of plant kingdom. Scope of Botany, cell

Biology, cell theory.

Unit–II : Plant cell

Structure of typical plant cell, cell wall and cell membrane, protoplasm - physical and chemical nature, cell

organelle - structure and functions, nucleus, Iysosomes, golgi bodies, plastids, ribosomes, mitochondria,

chromosomes, spherosomes, Important compounds of cell, water, amino acids, carbohydrates, fats,

nucleotides, nucleic acids.

Cell inclusions, physical and chemical nature and functions of enzymes, vitamins and hormones, mode of

enzyme action, cell cycle, Mitosis; Meiosis.

Unit–III : Complexities of plant life

9

Meristematic tissues, permanent, simple and complex tissues, Internal structure of dicot and monocot

systems and roots, Internal structure of Isobilateral and Dorsiventral with functions of different tissues,

Normal, secondary growth in dicot stems.

Unit–IV : Morphology of angiosperms

Normal and Modified stems, roots and leaves, Inflorescence, Flower and its parts, floral diagram and floral

formula, pollination, fertilization, fruits.

Unit–V : Taxonomy of flowering plants

Principle and units of classification (species, genus, family), knowledge of important families and their

economic importance.

Unit–VI : Continuity of plant life

Genetics (elementary knowledge), mitosis and meiosis and their significance, principle of Mendel’s law of

inheritance, monohybrid and dihybrid ratio, concept of gene, elementary idea of gene action, evolution,

evidence, theories and mechanism of evolution, variation and mutation, role of mutation in agriculture,

origin of species.

Unit–VII : Microorganisms and diversities of plant life : Elementary idea and economic importance of virus,

bacteria, fungi, algae and lichen, elementary idea of gryophytes, pterodophytes and gymnosperms.

Unit–VIII : Processes in plants

Absorption and transport of water and minerals, transpiration, stomatal mechanism, life energy and ATP,

respiration and fermentation, photosynthesis, elementary idea of protein synthesis, growth, reproduction,

movements (with special reference to geotrposim and phototropism).

Unit–IX : Environmental biology

Man and his environment, biotic community, ecological adaptations (hydrophytes and xerophytes).

Unit–X : Botany and human welfare

Agricultural crops - Brief description and economic importance of crop plants like rice, gram (green gram)

Jute, groundnut, sugarcane, and potato.

Unit–XI : Common plant diseases

control of blight in rice, rot of sugarcane, forestry, genetic conservation and crop improvement.

Unit–XII: Genetic engineering and biotechnology

Recombinant DNA, gene library, transgenic plants, fermentation, bakery, antibiotics, monochloral

antibodies.

(B-ZOOLOGY)

Unit–I : Animal world

Definition, scope and branch of zoology. Species concept, bionomical nomenclature, classification,

scientific name of some common animals: Fishes-rohu, bhakura, mrigal, Amphibians-frog, toad, Reptiles-

houselizard, garden lizard, crocodile, turtle, snakes-cobra, krait, birds-fowl. peacock, pigeon, mammals-

tiger, lion, elephant, cat, dog, cow, rabbit & man.

Unit–II : Diversity of life: Kingdom-protasia

General characters of the phylum, protozoa, Classification - amoeba, entamoeba, paramoecium,

euglena, trypanosoma, plasmodium.

Kingdom-animalia : Concept of body plan, symmetry, coelom, germ layershomeothermic and

poikilothermic animals.

General characters of Non-chordata like - porifera, coelenterata, platy helminthes, nematahelminthes,

annelida, arthopoda, mollusca, echinodermata & hemichrhordata.

Unit–III : Multi Cellularity in Animals

Animal tissues - Types- epithelial, connective (details about blood and lymph), muscular & nervous- organs

& organ systems.

Unit–IV : Locomotion

Locomotory organelles in protozoans, hydra, annelid, brief account of joints and muscles in movement of

man, modes of nutrition - Nutrition in amoeba.

Digestive system of man - Structure and function of alimentary canal associated glands, physiology of

digestion and absorption.

Unit–V : Types of Respiration

10

Structure and function of respiratory system in .man : Respiratory organs, mechanics of pulmonary

resipiration, plunomary exchange of gas, transport of gases, glycolysis & Kreb’s cycle, respiratory quotient.

Unit–VI : Digestive System

Organs, Digestion & absorption.

Unit–VII : Types of Circulation

Open circulation, closed circulatory system in man: Structure of Heart, cardiac cycle, arteries, veins,

capillaries, portal system, coronary circulation, blood pressure, respiratory pigments, group and

coagulation.

Unit–VIII : Excretory Reproduction in Man

Structure and function of kidney.

Unit–IX : Control and coordination in Man

Nervous system­central, peripheral and autonomic sense organs, endocrine system, Mechanism of

Hormone action.

Unit–X : Types of Reproduction

Asexual, binary & multiple fission, budding, cellular growth, re-generation, ageing.

Sexual reproduction in man - male & female reproductive system, menstrual cycle.

Unit–XI : Genetics

Chromosomes and heredity: heredity and viriation, mendelian principle, laws of heredity, chromosomes,

Interaction of genes, chromosomal variation.

Unit–XII : Evolution

Origin of life Anatomical, embryological biochemical, palaentological, and biogeographical evidences of

evolutions, Darwin’s theory of natural selection, modern synthetic theory.

Unit–XIII : Environmental Biology

Meaning of ecology environment, habitat and niche, biosphere and ecosystem, ecological adaptations,

biodiversity.

Environmental Pollution - Source, effects and control of air, water and sound pollution, deforestation, global

warming, climate change.

Unit–XIV : Common Human Disease

Non communicable diseases - Diabetes & cardiac diseases. Communicable diseases like, amoebiasis,

filariasis, malaria (Mode of inflection- pathogens, prevention and treatment).

Unit – XV : Defence Mechanism of Body

Cells, Immune system and their function, immune deficiency in AIDS.

Unit – XVI : Wild life Conservation

Importance of wild life, Causes of extinction, threatened species - endangered, vulnerable and rare

species, conservation of wild life.

SYLLABUS FOR LATERAL ENTRY (B.TECH) This paper is common to all the disciplines, except Pharmacy and HMCT.

UNIT-I : BASIC ELECTRICAL ENGINEERISNG

Electrostatics, electromagnetism & electrodynamics : Coulomb’s Law, Gauss theorem and its applications

in calculating the field intensity, potential gradient due to spherical, cylindrical and plane charges.

Calculation of capacitance of spherical, coaxial, cylindrical and parallel plate condensers, dielectrics,

energy stored in and electric field.

Circuital Law of magnetism, magnetic field intensity and flux density due to a long straight conductor,

solenoid. Ferromagnetic material in a magnetic field, permeability B-H curves, cyclic magnetisation and

hysteresis. Idea of magnetic circuit, mmf and reluctance, calculation of simple magnetic circuits, effect of

leakage.

Faraday’s law of electrodimagnetic induction, e.m.f in a conductor and a coil moving in a magnetic field.

Self and mutual, inductance series parallel combination, energy stored in magnetic field.

11

D.C. Circuits: Idea of d.c. circuits, power and energy in electric circuits, reduction of electric network by

series, parallel and star-delta conversion, representation of voltage source and current source, Kirchoff laws

and their application to solve electrical circuits by branch and loop current method and nodal method.

A.C. Circuits: Alternating current voltage, different wave forms, average value, effective value and form

factor. Sinusodial voltage and current., amplitude, frequency and phase, addition and substraction of A.C.

quantities, phasor diagram, complex representation of sinusoidal quantities, reactance, impedance and

admittance, simple series and parallel circuits and use of complex algebra in solving them, power and

power factor, active and reactive components, idea of power factor improvement, series and parallel

resonance Q - factor. Introduction to three phase circuits, relation between phase and line quantities. Star

and Delta connection of sources and loads, active and reactive power in 3-phase circuits, single and two

wattmeter method of power measurement. Steady circuit equations, solutions of simple coupled circuits

containing R,L, C and M.

Instruments: Construction and principle of operation of permanent magnet moving coil, moving iron and

dynamometer type ammeters and voltmeters, dynamometer type wattmeters.

Illumination: Definition and units of luminous flux, luminous intensity, illumination, brightness, luminous

efficiency.

Production of light: Filament lamps, halogen lamps, sodium and mercury vapour lamps, fluorescent lamps,

lighting calculation by inverse Square law and light flux method, co-efficient of utilization and maintenance

factor.

UNIT-II : MATHEMATICS

Ordinary Differential Equations: Differential equations of first order, physical applications, linear differential

equations, homogeneous and non- homogeneous second order linear differential equation with constant

co-efficients. Application to free and forced vibration of spring mass systems, method of variation of

parameters. Normal form change of dependent and independent variables. Cauchy’s Euler’s equation.

Series Method: Properties of power series, solution of ordinary differential equations. Legendre equations.

Legendre Polynpmials and functions, methods of Frobenius, the Gamma function, the Bessel -Clifford

equations, Bessel’s equation, non-homogeneous equations.

Laplace Transforms: The Laplace transforms (L.T), L.T. of derivaties and integrals, derivatives and integrals of

Laplace transforms, L.T. of periodic functions, Inverse Laplace transforms, Convolution theorem, Application

of L. T. to solution of differential equations, special techniques.

Fourier Series: Fourier theorem, Fourier expansion, even and odd functions, half range expansion, seems

and scale changes, forced oscillation, Miscellaneous expansion techniques.

Matrices: Notation and terminology, solution of simultaneous equations by Gaussian elimination, Rank,

computation of rank by reduction of Rewechelon normal form, algebra of matrix, inverse determinants,

linear dependence and independence, solution of homogeneous and non-homogenous systems.

Norms and products, Gram-schemidt Process, projection matrix, eiegenvalues, eigenvectors, symmetric

and simple matrix, System of linear differential equations the homogenous case.

Vectors: Vector algebra, vector differentiation, vector operator del, gradient, divergence, curl, integral

theorem.

UNIT-III : ENGINEERING MECHANICS

Statics: System of co-planer forces - Condition for equilibrium- concept of free body diagrams - Methods of

solution of engineering problems, problem with friction, belt friction and screw jack. Force analysis of plane

trusses (Method of joints and method of sections) Analysis of frames (Method of members). First moment of

area and centroid - theorem of Papus, second moment of areas, polar moment of inertia. Principle of

virtual work for a single particle, rigid bodies, ideal systems and constrained bodies.

Dynamics: Kinematics of rigid body - Plane motion, kinetics of translation and rotating rigid bodies, moment

of inertia of bodies.

D’Alembert’s Principle- Application to a single particle rigid body in translation ‘and rotation” ideal systems.

Momentum and impulse, application to principle of linear momentum to a single particle, rigid bodies and

ideal systems, impact - application of principle of angular momentum to a single particle and rotating rigid

bodies, principle of conservation of momentum.

Work and energy: Principle of work and energy for a single particle, rotating rigid body and ideal systems,

principle of conservation of energy.

12

SYLLABUS FOR LATERAL ENTRY FOR B.PHARM The course content is same as the syllabus of Part-I of Diploma in Pharmacy as per the Education

Regulation - 1991 of Pharmacy Council of India.

SYLLABUS FOR LATERAL ENTRY FOR BHMCT First, Second and Third year syllabus as approved by the Ministry of Tourism, Government of India.

SYLLABUS FOR MCA UNIT-I : MATHEMATICS

Logic: Statement, negation, implication, converse, contra positives, conjuction, disjunction, truth Table.

Algebra of Sets : Set operations, union, intersection, difference, symmetric difference, complement, Venn

diagram, cartesian products of sets, relation and function, composite function, inverse of a function,

equivalence relation, kinds of function.

Number Systems : Real numbers (algebraic and other properties, rational and irrational numbers), complex

numbers, algebra of complex numbers, conjugate and square root of a complex number, cube roots of

unity, De-Moivre’s theorem with simple application. Permutation and combinations and their simple

applications, mathematical induction, binomial theorem. Determinants upto third order, minors and

cofactors, properties of determinants. Matrices upto third order, types of matrices. Algebra of matrices,

adjoint and inverse of a matrix. Application of determinants and matrices to the solution of linear equations

(in three unknowns).

Trigonometry : Compound angles, multiple and sub-multiple angles, solution of trigonometric equations,

properties of triangles, inverse circular functions.

Co-ordinate Geometry of two dimensions : Straight lines, pairs of straight lines, circles, equations of tangents

and normals to a circle. Equations of parabola, ellipse and hyperbola, ellipse and hyperbola in simple forms

and their tangents (focus, directix, eccentricity and latus rectum in all cases).

Co-ordinate Geometry of Three Dimensions :

Distance and division formulae, direction cosines and direction ratios. Projections, angles between two

planes, angle between a line and a plane, distance of a point from a line and plane. equations of a

sphere-general equation.

Vectors: Fundamentals, dot and cross product of two vectors, scalar triple product, simple applications (to

geometry, work and moment).

Differential Calculus: (Concept of limit, continuity, derivation of standard functions, successive

differentiation (simple cases, Leibnitz theorem, partial differentiation (simple cases, derivatives as rate

measure, maxima and minima indeterminate forms, geometrical applications such as tangents and

normals to plane curves.

Integral calculus: Standard methods of integration (substitution, by parts, by partial fractions etc.). Definite

integrals and properties of definite integrals, areas under plane curves, differential equations (only simple

cases).

(i) dy/dx = f(x) (ii) dy/dx = f(x) g(y)

(iii) d2y/dx2 = f(x) and application to motions in a straight line with constant acceleration.

Probability and Statistics: Averages (mean, median and mode), dispersion (standard deviation and

variance). Definition of probability; mutually exclusive events. independent events, addition theorem.

UNIT-II : COMPUTER AWARENESS

Introduction to Computer: Brief history of computers, components of a computer, computer related

general knowledge, application of computers, classification of computers, simple DOS commands.

Computer Arithmetic: Number system with general base, number base conversion, elementary arithmetic

operation.

BASIC Language Programming: Flow charts, algorithms, constants, variables, arithmetic and logical

expression, elementary BASIC statements, writing simple programs (using sequence, repetition and control

structures), ‘subscripted variables, matrix operations function and subroutines, concept of Files.

Note: The question will cover the entire course and will be multiple choice type.

13

SYLLABUS FOR BACHELOR IN HOTEL MANAGEMENT & CATERING

TECHNOLOGY Section No. of Questions

Reasoning 20

Service Aptitude 20

General English 20

General Knowledge 20

General Science 20

Numerical Aptitude 20

SYLLABUS FOR MBA / MHA / MHM / M.SC. (ALL) COURSES Section No. of Questions

Verbal Reasoning 40

Analytical Reasoning 40

General Knowledge 10

Comprehension 15

Computer Fundamentals 15

14

SYLLABUS FOR M.PHARM. UNIT-I

Micromeretics & powder rheology, various dispersion systems (viz. colloidal, suspensions & emulsions)

kinetics & drug stability, polymorphism, surface & interfacial phenomenon. Liquid dosage forms,

pharmaceutical aerosols, ophthalmic preparations. Cosmetic preparations, tablets, capsules &

microencapsulation technology. Parenteral products, GMP and quality assurance, biopharmaceutics &

pharmacokinetics, compartment model and kinetics, clearance concept, bioavailability &

bioequivalence, formulation design of various controlled released drug delivery systems.

UNIT-II

Stereo isomerism, conformational analysis of alkanes and cycloalkanes, relative stabilities of cycloalkanes,

study of various heterocyclic compounds & polynuclear aromatic hydrocarbons, study of Amino acids,

proteins, carbohydrates & lipids, brief concept on QSAR, steps involved to synthesize various categories of

drugs mentioned in I.P and their SAR studies, structure elucidation of some important drugs under the

category of vitamins, antibiotics and alkaloids.

UNIT-III

Various limit tests, acid-base titrations, common ion effect, solubility product, theory & choice of indicators,

precipitation titrations, non-aqueous titrations, complexometirc & gravimetirc titrations, various oxidation &

reduction titrations, RIAS, principle, basic instrumentation, elements of interpretation of spectra and

applications of the following analytical tools. UV-Visible spectrophotometer IR & flame photometer NMR

spectroscope including 13 CNMR & mass spectrometer, study of various chromatographic instruments viz

TLC, column chromatography, HPLC, GLC & HPTLC.

UNIT-IV

Pathophysiology of common diseases, viz. rheumatoid arthritis, gout, epilepsy, psychosis, depression, mania

etc. Pharmacology of various drugs acting on peripheral nervous system, central nervous system, on

cardiovascular system, on haemopoetic system, urinary system, respiratory system, GI tract system &

endocrine system. Principles of chemotherapy and toxicology, pharmacology of autacoids, various

bioassay of drugs/hormones & biological standardization. Basic concepts on hospital and clinical

pharmacy.

UNIT-V

Study of cultivation, collection, chemical constituents, adulterants and uses of various drugs obtained from

natural sources with special emphasis on alkaloids, steroids, cardiac glycosides, terpenes, flavonoids and

volatile oils. General techniques of biosynthetic studies and basic metabolic pathways. Brief introduction to

biogenesis of secondary metabolites of pharmaceutical importance. Study of Plant tissue culture

techniques.

UNIT-VI

Pharmaceutical Biotechnology: Immunology & immunological preparations, genetic code & protein

synthesis, genetic recombination, gene cloning and its applications, development of hybridoma for

monoclonal antibodies. Microbial transformation, enzyme immobilization, study of drugs produced by

biotechnology. blood products and plasma substitutes.

SYLLABUS FOR M.TECH.

ELECTRONICS AND COMMUNICATION (COMMUNICATION SYSTEM ENGINEERING)

Unit – I : ENGINEERING MATHEMATICS

Linear Algebra: Matrix algebra, systems of linear equations, eigen values and eigen vectors.

Calculus: Mean value theorems, theorems of integral calculus, evaluation of definite and improper

integrals, partial derivatives, maxima and minima, multiple integrals, fourier series. vector identities,

directional derivatives, line, surface and volume integrals, stokes, gauss and green’s theorems.

Differential equations: First order equation (linear and nonlinear), higher order linear differential equations

with constant coefficients, method of variation of parameters, Cauchy’s and Euler’s equations, initial and

boundary value problems, partial differential equations and variable separable method.

15

Complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and

Laurent’ series, residue theorem, solution integrals.

Probability and Statistics: Sampling theorems, conditional probability, mean, median, mode and standard

deviation, random variables, discrete and continuous distributions, poisson, normal and binomial

distribution, correlation and regression analysis.

Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for

differential equations.

Transform Theory: Fourier transform, laplace transform, Z-transform.

Unit – II : ELECTRONICS AND COMMUNICATION ENGINEERING

Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and

fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition,

Thevenin and Norton’s maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis

using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits,

Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port

network parameters: driving point and transfer functions. State equations for networks.

Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion

current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode,

Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode,

Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion

implantation, photolithography, n-tub, p-tub and twin-tub CMOS process.

Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode

circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers:

single-and multi-stage, differential and operational, feedback, and power. Frequency response of

amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and

op-amp configurations. Function generators and wave-shaping circuits, 555 Timers. Power supplies.

Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL,

ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders,

PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold

circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory

and I/O interfacing.

Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time

Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling

theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response,

convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase

delay. Signal transmission through LTI systems.

Control Systems: Basic control system components; block diagrammatic description, reduction of block

diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal

flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of

LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci,

Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag

ompensation, elements of Proportional-Integral-Derivative (PID) control. State variable representation and

solution of state equation of LTI control systems.

Communications: Random signals and noise: probability, random variables, probability density function,

autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation

and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of

hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for

amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of

information theory and channel capacity theorem. Digital communication systems: pulse code modulation

(PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and

frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and

probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.

Electromagnetics: Elements of vector calculus: divergence and curl; Gauss and Stokes theorems, Maxwell’s

equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation

through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines:

characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters,

pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies;

16

dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas:

Dipole antennas; radiation pattern; antenna gain.

MECHANICAL ENGINEERING (Heat Power & Thermal Engineering)

Unit – I : ENGINEERING MATHEMATICS

Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.

Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems,

Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima,

Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume

integrals, Stokes, Gauss and Green’s theorems.

Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations

with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace

transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series.

Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean,

median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by

trapezoidal and Simpson’s rule, single and multi-step methods for differential equations.

Unit – II : APPLIED MECHANICS AND DESIGN

Engineering Mechanics: Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics

and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear

and angular) and energy formulations; impact.

Strength of Materials: Stress and strain, stress-strain relationship and elastic constants, Mohr’s circle for plane

stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear

stresses; deflection of beams; torsion of circular shafts; Euler’s theory of columns; strain energy methods;

thermal stresses.

Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic

analysis of slider-crank mechanism; gear trains; flywheels.

Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration

isolation; resonance, critical speeds of shafts.

Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram;

principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears,

rolling and sliding contact bearings, brakes and clutches.

Unit – III : FLUID MECHANICS AND THERMAL SCIENCES

Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass,

momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli?s

equation; viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through

pipes, head losses in pipes, bends etc.

Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical

analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat

transfer, various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary

layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis;

heat exchanger performance, LMTD and NTU methods.

Thermodynamics: Zeroth, First and Second laws of thermodynamics; thermodynamic system and processes;

Carnot cycle. irreversibility and availability; behaviour of ideal and real gases, properties of pure

substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to

energy conversion.

Applications: Power Engineering: Steam Tables, Rankine, Brayton cycles with regeneration and reheat. I.C.

Engines: air-standard Otto, Diesel cycles. Refrigeration and air-conditioning: Vapour refrigeration cycle,

heat pumps, gas refrigeration, Reverse Brayton cycle; moist air: psychrometric chart, basic psychrometric

processes. Turbomachinery: Pelton-wheel, Francis and Kaplan turbines, impulse and reaction principles,

velocity diagrams.

Unit – IV : MANUFACTURING AND INDUSTRIAL ENGG.

17

Engineering Materials: Structure and properties of engineering materials, heat treatment, stress-strain

diagrams for engineering materials.

Metal Casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design,

design considerations.

Forming: Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load

estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal

forming processes; principles of powder metallurgy.

Joining: Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding.

Machining and Machine Tool Operations: Mechanics of machining, single and multi-point cutting tools, tool

geometry and materials, tool life and wear; economics of machining; principles of non-traditional

machining processes; principles of work holding, principles of design of jigs and fixtures.

Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators;

gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance

analysis in manufacturing and assembly.

Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools.

Production Planning and Control: Forecasting models, aggregate production planning, scheduling,

materials requirement planning.

Inventory Control: Deterministic and probabilistic models; safety stock inventory control systems.

Operations Research: Linear programming, simplex and duplex method, transportation, assignment,

network flow models, simple queuing models, PERT and CPM.

ELECTRICAL ENGINEERING (POWER SYSTEMS & POWER ELECTRONICS)

Unit – I : ENGINEERING MATHEMATICS

Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper

integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities,

Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations

with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and

boundary value problems, Partial Differential Equations and variable separable method.

Complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and

Laurent’ series, Residue theorem, solution integrals.

Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard

deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial

distribution, Correlation and regression analysis.

Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for

differential equations.

Transform Theory: Fourier transform, Laplace transform, Z-transform.

Unit – II : ELECTRICAL ENGINEERING

Electric Circuits and Fields: Network graph, KCL, KVL, node and mesh analysis, transient response of dc and

ac networks; sinusoidal steady-state analysis, resonance, basic filter concepts; ideal current and voltage

sources, Thevenin’s, Norton’s and Superposition and Maximum Power Transfer theorems, two-port networks,

three phase circuits; Gauss Theorem, electric field and potential due to point, line, plane and spherical

charge distributions; Ampere’s and Biot-Savart’s laws; inductance; dielectrics; capacitance.

Signals and Systems: Representation of continuous and discrete-time signals; shifting and scaling

operations; linear, time-invariant and causal systems; Fourier series representation of continuous periodic

signals; sampling theorem; Fourier, Laplace and Z transforms.

Electrical Machines: Single phase transformer - equivalent circuit, phasor diagram, tests, regulation and

efficiency; three phase transformers - connections, parallel operation; auto-transformer; energy conversion

principles; DC machines - types, windings, generator characteristics, armature reaction and commutation,

starting and speed control of motors; three phase induction motors - principles, types, performance

characteristics, starting and speed control; single phase induction motors; synchronous machines -

18

performance, regulation and parallel operation of generators, motor starting, characteristics and

applications; servo and stepper motors.

Power Systems: Basic power generation concepts; transmission line models and performance; cable

performance, insulation; corona and radio interference; distribution systems; per-unit quantities; bus

impedance and admittance matrices; load flow; voltage control; power factor correction; economic

operation; symmetrical components; fault analysis; principles of over-current, differential and distance

protection; solid state relays and digital protection; circuit breakers; system stability concepts, swing curves

and equal area criterion; HVDC transmission and FACTS concepts.

Control Systems: Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and

Niquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; state space model; state

transition matrix, controllability and observability. Electrical and Electronic Measurements: Bridges and

potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of

voltage, current, power, energy and power factor; instrument transformers; digital voltmeters and

multimeters; phase, time and frequency measurement; Q-meters; oscilloscopes; potentiometric recorders;

error analysis.

Analog and Digital Electronics: Characteristics of diodes, BJT, FET; amplifiers - biasing, equivalent circuit and

frequency response; oscillators and feedback amplifiers; operational amplifiers - characteristics and

applications; simple active filters; VCOs and timers; combinational and sequential logic circuits; multiplexer;

Schmitt trigger; multi-vibrators; sample and hold circuits; A/D and D/A converters; 8-bit microprocessor

basics, architecture, programming and interfacing.

Power Electronics and Drives: Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and

IGBTs - static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge

converters - fully controlled and half controlled; principles of choppers and inverters; basis concepts of

adjustable speed dc and ac drives.

COMPUTER SCIENCE & ENGINEERING

UNIT – I : ENGINEERING MATHEMATICS

Mathematical Logic: Propositional Logic; First Order Logic.

Probability: Conditional Probability; Mean, Median, Mode and Standard Deviation; Random Variables;

Distributions; uniform, normal, exponential, Poisson, Binomial.

Set Theory & Algebra: Sets; Relations; Functions; Groups; Partial Orders; Lattice; Boolean Algebra.

Combinatorics: Permutations; Combinations; Counting; Summation; generating functions; recurrence

relations; asymptotics.

Graph Theory: Connectivity; spanning trees; Cut vertices & edges; covering; matching; independent sets;

Colouring; Planarity; Isomorphism.

Linear Algebra: Algebra of matrices, determinants, systems of linear equations, Eigen values and Eigen

vectors.

Numerical Methods: LU decomposition for systems of linear equations; numerical solutions of non linear

algebraic equations by Secant, Bisection and Newton-Raphson Methods; Numerical integration by

trapezoidal and Simpson’s rules.

Calculus: Limit, Continuity & differentiability, Mean value Theorems, Theorems of integral calculus,

evaluation of definite & improper integrals, Partial derivatives, Total derivatives, maxima & minima.

UNIT – II : FORMAL LANGUAGES AND AUTOMATA

Regular Languages : Finite automata, regular expressions, regular grammar.

Context free languages : Push down automata, context free grammars.

UNIT – III : COMPUTER HARDWARE

Digital Logic: Logic functions, minimization, design and synthesis of combinatorial and sequential circuits,

number representation and computer arithmetic (fixed and floating point)

Computer organization: Machine instructions and addressing modes, ALU and data path, hardwired and

microprogrammed control, memory interface, I/O interface (interrupt and DMA mode), serial

communication interface, instruction pipelining, cache, main and secondary storage.

19

UNIT – IV : SOFTWARE SYSTEMS

Data structures and Algorithms : The notion of abstract data types, stack, queue, list, set, string, tree, binary

search tree, heap, graph, tree and graph traversals, connected components, spanning trees, shortest

paths, hashing, sorting, searching, design techniques (greedy, dynamic, divide and conquer), asymptotic

analysis (best, worst, average cases) of time and space, upper and lower bounds, intractability.

Programming Methodology : C programming, program control (iteration, recursion, functions), scope,

binding, parameter passing, elementary concepts of object oriented programming

Operating Systems (in the context of Unix): classical concepts (concurrency, synchronization, deadlock),

processes, threads and interprocess communication, CPU scheduling, memory management, file systems,

I/O systems, protection and security.

Information Systems and Software Engineering: information gathering, requirement and feasibility analysis,

data flow diagrams, process specifications, input/output design, process life cycle, planning and

managing the project, design, coding, testing, implementation, maintenance.

Databases: relational model, database design, integrity constraints, normal forms, query languages (SQL),

file structures (sequential, indexed), b-trees, transaction and concurrency control.

Data Communication : data encoding and transmission, data link control, multiplexing, packet switching,

LAN architecture, LAN systems (Ethernet, token ring), Network devices: switches, gateways, routers.

Networks : ISO/OSI stack, sliding window protocols, routing protocols, TCP/UDP, application layer protocols

& systems (http, smtp, dns, ftp), network security

Web technologies : three tier web based architecture; JSP, ASP, J2EE, .NET systems; html, XML.

CIVIL ENGINEERING (STRUCTURAL ENGINEERING)

UNIT- I : ENGINEERING MATHEMATICS

Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.

Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems,

Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima,

Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume

integrals, Stokes, Gauss and Green’s theorems.

Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations

with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace

transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables: Analytic functions, Cauchy’s integral theorem, Taylor and Laurent series. Probability

and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median,

mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by

trapezoidal and Simpson’s rule, single and multi-step methods for differential equations.

UNIT - II : STRUCTURAL ENGINEERING

Mechanics: Bending moment and shear force in statically determinate beams. Simple stress and strain

relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr’s circle. Simple

bending theory, flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure

vessels, uniform torsion, buckling of column, combined and direct bending stresses.

Structural Analysis: Analysis of statically determinate trusses, arches, beams, cables and frames,

displacements in statically determinate structures and analysis of statically indeterminate structures by

force/ energy methods, analysis by displacement methods (slope deflection and moment distribution

methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods

of structural analysis.

Concrete Structures: Concrete Technology- properties of concrete, basics of mix design. Concrete design-

basic working stress and limit state design concepts, analysis of ultimate load capacity and design of

members subjected to flexure, shear, compression and torsion by limit state methods. Basic elements of

prestressed concrete, analysis of beam sections at transfer and service loads.

20

Steel Structures: Analysis and design of tension and compression members, beams and beamcolumns,

column bases. Connections- simple and eccentric, beam–column connections, plate girders and trusses.

Plastic analysis of beams and frames.

UNIT - III : GEOTECHNICAL ENGINEERING

Soil Mechanics: Origin of soils, soil classification, three - phase system, fundamental definitions, relationship

and interrelationships, permeability and seepage, effective stress principle, consolidation, compaction,

shear strength.

Foundation Engineering: Sub-surface investigations- scope, drilling bore holes, sampling, penetration tests,

plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopes- infinite slopes,

finite slopes. Foundation types- foundation design requirements. Shallow foundations- bearing capacity,

effect of shape, water table and other factors, stress distribution, settlement analysis in sands and clays.

Deep foundations – pile types, dynamic and static formulae, load capacity of piles in sands and clays,

negative skin friction.

UNIT - IV : WATER RESOURCES ENGINEERING

Fluid Mechanics and Hydraulics: Properties of fluids, principle of conservation of mass, momentum, energy

and corresponding equations, potential flow, applications of momentum and Bernoulli’s equation, laminar

and turbulent flow, flow in pipes, pipe networks. Concept of boundary layer and its growth. Uniform flow,

critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on

immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic

modeling. Kinematics of flow, velocity triangles and specific speed of pumps and turbines.

Hydrology: Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit

hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics. Irrigation:

Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of: lined and unlined

canals, waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation.

Types of irrigation system, irrigation methods. Water logging and drainage, sodic soils.

UNIT - V : ENVIRONMENTAL ENGINEERING

Water requirements: Quality standards, basic unit processes and operations for water treatment. Drinking

water standards, water requirements, basic unit operations and unit processes for surface water treatment,

distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater.

Primary, secondary and tertiary treatment of wastewater, sludge disposal, effluent discharge standards.

Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and

secondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal.

Air Pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control,

air quality standards and limits.

Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes,

engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and

disposal).

Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of

noise pollution.

UNIT - VI : TRANSPORTATION ENGINEERING

Highway Planning: Geometric design of highways, testing and specifications of paving materials, design of

flexible and rigid pavements.

Traffic Engineering: Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal

design, highway capacity.

UNIT - VII : SURVEYING

Importance of surveying, principles and classifications, mapping concepts, coordinate system, map

projections, measurements of distance and directions, leveling, theodolite traversing, plane table

surveying, errors and adjustments, curves.

SYLLABUS FOR M.SC. AGRICULTURE The question of entrance test will be comprised of two parts, Part-A and Part-B. There will be 100 general

multiple choice questions (Non-crop specific) in part-A and 20 crop specific (Field crop and Horticultural

21

crops in equal proportion) questions in part-B following the common syllabi of Agriculture and Horticulture

faculties. Candidates have to appear all the questions.

SYLLABUS FOR M.SC. NURSING Unit–I : Nursing Foundations

Nursing as a Profession & it’s concept and Practice, Nursing trends and theories, Hospital Admission &

discharge, Nursing Process, Intra personal relationship, Recording & reporting, vital signs, Health assessment,

Equipment and linen management, Meeting needs of patient, Urinary & Bowel elimination, Psychosocial

needs, Infection control & Microbiology, Administration of medication & it’s management, Care of

terminally ill patients

Unit–II : Medical Surgical nursing

New trends and concepts, Role & responsibilities of a Nurse in Client & family, Anatomy & Physiology

related to each system, Management of patients having disorders in respiratory, cardiovascular &

cardiothoracic, digestive, genitourinary, reproductive, endocrine, integumentary, musculoskeletal and

immunological system etc., nursing management of patient with disorders in eye, ENT, and neurological

system, management of burns and reconstructive and cosmetic surgery, management of oncological

conditions, emergency and disaster management, care of elderly, management of patients C.C.U,

management of occupational and industrial disorders

Unit-III : Community Health Nursing

Determinants of health, epidemiology and nursing management of communicable and non-

communicable diseases, demography, population and its control, health planning policies and problems,

delivery of community health services, concepts and approach of community health nursing, national

health and family welfare programmes, national and international health agencies, waste management at

home and community, medical care follow up,

Unit–IV : Child Health Nursing & Neonatology

Modern concept of child care, care of neonate, IMNCI, management of behavioural and social problems

in children, milestones, pediatrics medicine and surgery ICU management

Unit-V : Mental Health Nursing

Concepts and principles, therapeutic communication, treatment modalities and therapies used in mentally

disorder, nursing management of patient with schizophrenia, psychotic and neurotic, somatisation disorder,

substance used disorders, stress related disorders, personality, childhood and adolescent disorders,

psychiatric emergencies and crisis intervention, legal issues in mental health nursing

Unit-VI : GYNAECOLOGY and Obstetrical Nursing

Anatomy & Physiology of reproductive system, assessment and management of antenatal, intranatal and

postnatal mothers (normal & abnormal cases), assessment and management of normal neonates, high risk

pregnancy assessment, abnormal labour management, management of high risk new borns, pharmaco-

therapeutics in obstetrics, family welfare programme

Unit-VII : Administration and Education in Nursing

Management in Nursing, management process and nursing services in the hospital, community and

educational institutions, organizational behavior and human relation, in service education and professional

advancement, guidance and counseling, method of teaching educational media, I.E.C for Health, legal

aspects in Nursing, professional advancement.

Unit–VIII : Nursing Research and Nursing Statistics : Research process, research problems and questions,

review of literature, research approaches and designs, sampling and data collection, introduction to

statistics(mean, median, mode, frequency distribution, coefficient, correlation statistical package and its

application), biostatistics , communication and utilization of research.

SYLLABUS FOR P.B.B.Sc. NURSING UNIT-I : Anatomy & Physiology : Organization of body cell, tissue, organs and different systems.

UNIT-II : Microbiology : Immunity, infection, sterilization & micro-organism.

UNIT-III : Psychology & Sociology : Human behaviour, learning, attention, perception, intelligence and

personality.

22

UNIT-IV : Fundamentals of Nursing :Basic needs and care of the patients, therapeutic nursing care, nursing

process, ethics in nursing, First-Aid

UNIT-V : Medical-Surgical Nursing : Management of patients with pain, undergoing surgery, respiratory,

gastrointestinal, urinary, cardiovascular disorders nursing & Communicable diseases, assessment altered

immune response, Emergency management, nursing care of elderly people. Oncology nursing.

UNIT-VII : Psychiatric Nursing : Mental health assessment, disorder and nursing & crisis intervention, legal

aspects.

UNIT-VIII : Mid-wifery & GyneAcological nursing : Embryology and fiddle development, nursing

management of pregnant women, labour, nursing management of baby at birth and mother during

puriterium. Hi-risk pregnancy, obstetric operation

UNIT-IX : Pediatric Nursing : New Born, healthy child, sick child, behavioural disorder and common health

problems during childhood, children with congenital defect, welfare of children.

UNIT-X : Professional Trends : Nursing as a profession, professional ethics, personal and professional growth

and development, legislation in nursing, professional and related organisation.

Administration and Management : Hospital and ward.

SYLLABUS FOR B.A. LLB (H) / B.B.A. LLB (H) / LL.B (H) / BBA / BCA Section No. of Questions

English including comprehension 20

General Knowledge / Current Affairs 20

Elementary Numerical Aptitude 20

Legal Aptitude / Legal Awareness 30

Logical Reasoning 30

SYLLABUS FOR LLM Section No. of Questions

Legal Theory 20

Constitutional Law 30

Criminal Law 30

Law of Torts 20

Law of Contracts 20

SYLLABUS FOR MCA LATERAL ENTRY Section No. of Questions

Mathematics 60

Computer Fundamentals / 60

Programming Languages /Operating Systems