Upload
lythu
View
221
Download
0
Embed Size (px)
Citation preview
Swivel Arm Beam Clamp
With Rotating Suspension Arm
Swivel Structural Beam Clamps are time-saving rigging solutions that provide a safe and load-rated method of securing loads from overhead Beams. Once anchored to a beam, they provide a simple and reliable method for aiming loudspeakers and other objects.
Swivel Beam Clamps secure to a building’s overhead structural beams,steel or wood, for widths ranging from 3.0” to 12.0” (76 to 305 mm) wide.
It’s lower suspension arm comes in a variety of lengths to suit the needsof the installation and rotates 360 degrees for precise aiming.
SPECIFICATIONS:
Materials: Structual Steel Alloy
Finish: Powder Coat
Color: Black
Pan Rotation: 360º
WLL: 300 lb / 136.4 Kg
Design Factor: 5:1 Ratio
Pack Count: 1/carton
PACKAGE CONTENTS:
1pc: Beam Clamp
1pc: Swing Arm
2pc: Eyebolts
1bag: Hardware Kit
Adaptive Technologies Group1635 E. Burnett Street | Signal Hill, CA 90755 USAPh: 562.424.1100 | Fax: 562.424.3520www.adapttechgroup.com
ALWAYS INSTALL SAFETY CABLES
WARNING: Mounting and/or suspension of audio and video equipment requires experienced professionals. Improperly installed loudspeakers can result in prop-erty damage, personal injury and/or liability to the installing contractor.
BEAM CLAMPS
OPTIONAL ACCESSORIES:
AJ-1524 - Adjustable U-Bracket
AJ-2336 - Adjustable U-Bracket
TCK Series - Adjustable Tilt Cable Kit
TCK2 Series - Adjustable Tilt Cable Kit
FC Series - Fixed Length Wire Rope Assemblies
BC-LAM-KIT - Laminated Beam Adapter Kit
SWIVEL BEAM ARRAY DIMENSIONSSwivel Beam
ClampsA1 A2 B C D E F G H (REF) I J K L1 L2
SBC3-8-CA-20 3 8 12 .50 MAX 1.5 17.25 19.75 3 6.8 7 8.5 10 15 24
SBC3-8-CA-30 3 8 12 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36
SBC7-12-CA-20 8 12 16 .50 MAX 1.5 17.25 19.25 3 6.8 7 8.5 10 15 24
SBC7-12-CA-30 8 12 16 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36
SBC12-17-CA-20 12 17 16 .50 MAX 1.5 17.25 20 3 6.8 7 8.5 10 15 24
SBC12-17-CA-30 12 17 16 .50 MAX 1.5 27.5 30 3 6.8 7.9 9.4 10.9 23 36
.L1
J.
.G
K.
I.
D.
C.
L2.
A1.
H.
.A2
.D
B.
F.
.C
E. G.
.25
10.00
2.50.25R
9.75
DEBURR.69
1.25
1.25
R.13 TYP
.63
4.005.00
.56 2XDEBURR
W D BEA SUSPE SI PTI
EYEB T SUSPE SI PTI U BRAC ET SUSPE SI PTI
11.2810.52
3.00
.32, TOP ONLY,(6X)
.32X0.375 THRU SLOT,(4X)
.51 BOTTOM ONLY,
1.50 TOP ONLY,
1.50
27.5026.25
1.75
1.75
4.75
.32 (6X)
17.25
(4X) THRU HOLE,.32
.32(4X)
X0.5 THRU SLOT,
TOP ONLY,1.50
BOTTOM ONLY,.51
1.50
5.75
16.0011.76
19.75
20” Cross Arm
30” Cross ArmTo suspend and swivel objects from structural wood and laminate beams, add this pre-engineered adapter bracket kit with the Swivel Beam.
BC A IT
U-Bracket Option Wood Beam OptionVertical Orientation
Dual Tilt Kit OptionHorizontal Orientation
Eyebolt Suspension Option
U-BracketSuspension Option