SWIFT Mast - SMC LtdSWIFT5(PN) 44 SWIFT4(PN) 50 South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND

SWIFT Mast

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]

Using the SMC designed Quick Clamp Collar the SWIFT series of pneumatic (PN) & push up masts have been designed to be lightweight & economical. The mast comes anodised as standard, & can be clamped at any height, with a maximum head load of 10kg, & a maximum height of 10 metres.

The SWIFT Telescopic Pneumatic & Push Up Mast Series is light weight, easily transportable, quick to deploy and robust in even the harshest of environments. Heights range from 4 to 10 metres with a base diameter of 74mm, carrying head-loads up to 10kgs. The mast can be elevated manually, or by hand or foot pump for even quicker and easier elevation.

See Diagram A (page 2) for our comprehensive range of accessories, including our SWIFT Series Pivot Base for installing masts on uneven ground, & our SWIFT Mast Haylard for lowering & raising light head loads, without having to retract the mast.

Mast Extended Height

Retracted Height

Vertical Head Load

No Of Sections

Weight

Metres Metres Kgs Kgs

SWIFT4 4.0 1.33 10 4 6.4

SWIFT5 5.0 1.38 10 5 7.5

SWIFT6 6.0 1.58 10 5 8.3

SWIFT7 7.0 1.61 10 6 9.4

SWIFT8 8.0 1.63 10 7 10.2

SWIFT9 9.0 1.66 8.5 8 10.9

SWIFT10 10.0 1.79 8.5 8 11.6

SWIFT4PN 4.0 1.38 10 4 7.0

SWIFT5PN 5.0 1.44 10 5 8.2

SWIFT6PN 6.0 1.64 10 5 9.0

SWIFT7PN 7.0 1.67 10 6 10.0

SWIFT8PN 8.0 1.70 10 7 10.9

SWIFT9PN 9.0 1.74 8.5 8 11.7

SWIFT10PN 10.0 1.86 8.5 8 12.3All dimensions are approximate.

SWIFT Upper/Base Guy SetP/N: NUG/SWIFT(4/5/6/7/8/9/10)*P/N: NBG/SWIFT(4/5/6/7/8/9/10)*

Rapid Deployment UnitP/N: RDU/74

Side Mount BracketsP/N: NSM/74B

SWIFT Mast TripodP/N: TRI/SWIFT/(01/02)*

Mou

ntin

g O

ptio

ns

Mast Transport WheelsP/N: 050002300

SWIFT Mast Halyard P/N: SWIFT

(4/5/6/7/8/9/10)/HAL*

SWIFT Mast CoverP/N: NKB/B

SMC Hand PumpP/N: NHP1

Twin Cylinder Foot PumpP/N: NFP/1

NC1 CompressorP/N: NC1/(12/24/230)*

SWIFT Series Flat BaseP/N: 050002000

SWIFT Series Pivot BaseP/N: 050002100

PFC Base PlateP/N: 050029743

Oth

er A

cces

sory

Opt

ions

Pneu

mat

ic O

pera

tion

Opt

ions

Bas

e M

ount

ing

Opt

ions

SWIFT Series MastPneumatic P/N:

SWIFT(4/5/6/7/8/9/10)PN*Push Up P/N:

SWIFT(4/5/6/7/8/9/10)*

Diagram A*NOTE: See Table C for compatible product variants.


Anti-Rotation Flat Base P/N: 050002500

Cable GuidesP/N: CG/SWIFT

(4/5/6/7/8/9/10)

Rotational GuysP/N: RBG/SWIFT

RUG/SWIFT(4/5/6/7/8/9/10)

Spirit Level 01

Table C - Part Number Compatibility

Mast Base Guy Upper Guy Tripod Halyard

SWIFT10 NBG/SWIFT10 NUG/SWIFT10 TRI/SWIFT/02 SWIFT10/HAL







SWIFT10PN NBG/SWIFT10 NUG/SWIFT10 TRI/SWIFT/02 SWIFT10/HAL







Some models are only compatible with other products, select the correct one from the list above. Some part numbers and/or descriptions may vary slightly due to type, size or finish of product.

SMC can manufacture custom designed spigots to suit your requirements, the SWIFT Series of telescopic masts are all fitted with a quick release collar on the top section as standard, meaning you can interchange your head load in a matter of seconds. See Table D for required spigot diameters for each mast.

Mast Spigot Diameter (mm)

SWIFT10(PN) 25.4

SWIFT9(PN) 25.4

SWIFT8(PN) 32

SWIFT7(PN) 38

SWIFT6(PN) 44

SWIFT5(PN) 44

SWIFT4(PN) 50

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: [email protected]

Table D


SWIFT Mast

Documents

SWIFT Mast - SMC LtdSWIFT5(PN) 44 SWIFT4(PN) 50 South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLAND