SHOP SUBMITTAL / DRAWING REVIEW

RESPONSE

Project Name: DPARD Admin Offices From: Chuck Stringer

Project No: 13333

Description: 238333.01 Electric Radiant Heater Submittal

SW Associates Consulting Engineers

Engineer’s review is for general compliance with the design concept and contract documents. Markings or comments or the lack there of shall not be construed as relieving the Contractor from compliance with the project plans and specifications. The Contractor remains responsible for details and accuracy, for confirming and correlating all quantities and dimensions, for selecting fabrication processes, for techniques of construction, for performing this work in a safe manner and for coordinating his work with that of other trades This review does not constitute approval or acceptance of deviations from contract documents, such deviations if any must be requested in writing or clearly identified as deviations in accordance with contract documents.

No Exception Taken

Make Corrections Noted

Revise and Submit

Rejected

SWA Project No. 13333 Submittal No: 238333.01

Date: 04-01-19

Checked By: Chuck Stringer

Comments:

SW Associates Consulting Engineers 5429 LBJ Freeway Suite 300 LB129 Dallas, TX 75240 www.swaengineers.com Tel 1.214.397.0211 Fax 1.214.397.0886

Formerly Consulting Engineers

SUBMITTAL TRANSMITTAL

CONTRACTOR’S REVIEW STAMP A/E REVIEW STAMP

SUBMITTAL DATA

Project Dallas Park & Rec Dept Admin Offices Location 10031 E. Northwest Highway Dallas, TX 75238

General Contractor DENCO CONSTRUCTION SPECIALISTS

Trade HVAC

Items Submitted Electric Radiant Heater

Supplier Total HVAC Phone 214-926-8260

Substitutions and Deviations

Remarks

I CERTIFY THAT THE ABOVE ITEM DESCRIBED IN THE ATTACHED SUBMITTAL COMPLIES WITH THE CONTRACT

DOCUMENTS EXCEPT AS NOTED ABOVE.

Shawnee Hallmark 972-226-2609 ext. 108 3-20-19

NAME (TRADE) PHONE NO. DATE

Review Comments:

DENCO CONSTRUCTION SPECIALISTS

SHOP DRAWING AND SUBMITTAL REVIEW

JOB NO. DPA-238333

DATE 3-20-19

REVIEWER Shawnee Hallmark

Corrections or comments made relative to submittals during this review

do not relieve the subcontractor from compliance with the requirements

of the drawings and specifications. This check is only for review of

general conformance with the design concept of the project and general

compliance with the information given in the contract documents. The

subcontractor is responsible for conforming and correlating all

quantities and dimensions, selecting fabrication processes and

techniques of construction, coordinating his work with that of other

trades and performing his work in a safe and satisfactory manner.

THIS REVIEW DOES NOT INDICATE NOR IMPLY ANY APPROVAL

OF CHANGES TO TIME OR CHANGES IN COSTS

FOR REVIEW

REDD-I HEATER SUBMITTAL DATA

FOR

Dallas Parks and Recreation

Administration Offices Dallas, TX

Owner: City of Dallas Mechanical Engineer: SWA Mechanical Contractor: Total HVAC

Date: 3/5/2019 Revision: Original Submitted By: Kia Kohen, Texas AirSystems, Inc. Equipment Manufacturer: Redd-I Equipment Type: Electric Heaters Unit Tags: BBH-1, note on M-201

FOR REVIEW

REDD-I UNIT HEATERS Tag: note on M-201 One (1) Redd-i, Series 5100, wall or ceiling mounted, horizontal airflow, electric unit heater, designed for 208V/3Ph/60HZ power, and complete as follows:

Painted galvanized steel construction Ceiling/wall mounting bracket Integral 5.0 kW electric heater Unit mounted thermostat Notes: 1. Installation, disconnects, & wiring are by others.

Redd- Electric Baseboard Heater Tag: BBH-1 One (1) Q-mark, Model 9100, floor mounted, vertical airflow, electric baseboard heaters, designed for 208V/1Ph/60HZ power, and complete as follows:

Painted galvanized steel construction 8’-0” Length Pedestal mount End caps Built in thermostat 250 watts per foot

Notes: 1. Installation, controls, disconnects, & wiring are by others.

DATE

TAG

QUANTITY

MODEL

KILOWATTS

VOLTS

PHASE

DISCONNECT

THERMOSTAT

BRACKET

OPTIONS

OPTIONS

WEIGHT

H W D E A B (Pounds)

17 3/4 14 15/32 6 1/2 1 5/8 11 1/2 11 1/2 25

24 5/16 21 1/2 6 1/2 2 7/32 15 1/4 15 1/4 54

28 11/16 21 1/2 6 1/2 2 7/32 15 1/4 15 1/4 65

34 29 1/4 10 1/16 2 5/8 20 1/4 20 1/4 120

35 1/2 30 1/2 14 1/2 5 23 1/2 23 1/2 141

39 1/2 37 5/8 18 1/2 5 27 1/2 27 1/2 202

SUBMITTAL DATA SHEET CUSTOMER

PROJECT

7.5 & 10

15 & 20

25 THRU 50

60 & 70

80 - 90 - 100

3.3 & 5

UNIT SIZE KWDIMENSIONS (Inches)

5100 SERIES HORIZONTAL/VERTICLE

UNIT HEATER

WWW.TPICORP.COM - 114 ROSCOE FITZ RD. - JOHNSON CITY TN 37615

9/16" K.O.

1/2" K.O.3/4" K.O.

3/4" - 1" K.O.

9/16" K.O.

(4) 5/16" K.O.*

3.3 - 5 KW

9/16" K.O.

1/2" K.O.9/16" K.O.

(4) 5/16" K.O.*

7.5 - 20 KW

1/2" - 3/4" K.O.

9/16" K.O.

(4) 5/16" K.O.*

25 - 50 KW

1" - 1 1/4" - 1 1/2" - 2" K.O.1/4" K.O.

* For vertical dischargemounting bracket

Diagrams not to scale

1/2" K.O.3/4" K.O.

(4) 5/16" K.O.*

60 - 100 KW

2 1/2" - 2" - 1 3/4" K.O.

wD

H

E

A

(4 )MOUNTING HOLES

5 /16-18 THREADS

(TOP & BACK )

B

12"

12"8'

FIG. 1HORIZONTAL DISCHARGE

FIG. 2VERTICAL DISCHARGE

12"

12"

8'

MOUNTINGCLEARANCE

•Heavy 18 gauge steel construction

•Powder coated paint finish

•Copper clad steel sheath element with brazed fins andNichrome element wire.

•All units equipped with automatic over-heat limit protection

•Totally enclosed fan motors

•Louvers are individually adjustable for directional air flow

•Optional remote and unit mounted controls includethermostats, disconnects, and fan switches

•Optional accessories include mounting brackets, louvers,fan guards, and dust shields • Made in the U.S.A.

5100 SERIESACCESSORIES

&OPTIONS

WWW.TPICORP.COM - 114 ROSCOE FITZ RD. - JOHNSON CITY TN 37615

HEATER KW GUARD WEIGHT (lbs)

3.3 - 5 OFG5101 1

7.5 - 20 OFG5102 1

25 - 50 OFG5103 2

60 - 70 OFG5175 4

80 - 100 OFG51100 5

FAN GUARD

OFG5100 FAN GUARD

HEATER KW SHEILD WEIGHT (lbs)

3.3 - 5 DS5105 3

7.5 - 20 DS5120 4

25 - 50 DS5150 5

60 - 70 DS5175 10

80 - 100 DS51100 17

DUST SHIELD

DS5100 DUST SHIELDHEATER KW BRACKET WEIGHT (lbs)

3.3 - 5 V5105 9

7.5 - 20 V5120 13

25 - 50 V5150 16

60 - 70 V5175 19

80 - 100 V51100 22

VERTICAL MOUNT BRACKET

V5100 BRACKET

HEATER KW BRACKET WEIGHT (lbs)

3.3 - 20 B5105 2

25 - 50 B5150 3

60 - 70 B5170 5

80 - 100 B51100 12

HEATER BRACKET

B5100 BRACKETHEATER KW BRACKET WEIGHT (lbs)

3.3 - 5 A5105 97.5 - 20 A5120 1325 - 50 A5150 1660 - 70 A5175 25

80 - 100 A51100 36

A5100 BRACKET

WALL BRACKET

& HEATER BRACKET

T5100 40°-100° F

T5102 60°-120° F

T5122 45°- 90°

RK120EAA 50°-90° F

TW123 40°-90° F

ET9SS 50°-90° F

TW1512 50°-90° F

SD 50° - 90° F SETBACK CONTROL WITH OCCUPANCY SENSOR AND DIGITAL DISPLAY

STEP CONTROLLER 60 TO 100 KW UNITS ONLY

SEQUENCES ON THE STAGING IN THE 60 TO 100 KW HEATERS USING FIELD SUPPLIED SIGNAL OR C1025 WALL THERMOSTAT

DISCONNECT SWITCH DISCONNECT SWITCH MUST BE DERATED FOR USE AT MAX 80% OF TOTAL HEATER RATED AMPERAGE

THERMOSTATS (BUILT IN) FACTORY SUPPLIED AND FIELD INSTALLED ( EXCEPT SD MODEL THERMOSTAR)

SINGLE POLE SINGLE STAGE FIELD MOUNTED IN CONTROL SECTION KNOCKOUT PROVIDED

DPST FIELD INSTALLED - USE WITH 3.3 AND 5 KW UNITS LINE VOLTAGE WITH THREE PHASE POWER

LOW VOLTAGE TWO STAGE FIELD INSTALLED FOR USE WITH UNITS 25 TO 50 KW

WALL MOUNTED SINGLE STAGE LOW VOLTAGE

WALL MOUNTED TWO STAGE LOW VOLTAGE (25 TO 50 KW UNITS)

WALL MOUNTED LINE VOLTAGE SINGLE POLE 22 AMP 120-277 VOLT

DPST WALL MOUNTED LINE VOLTAGE 25 AMP 120-277 VOLT (3.3-5 KW ON 3 PHASE POWER)

FS

C1025 THERMOSTAT WALL THERMOSTAT WITH 0-10 VDC PULSING SIGNAL FOR STEP CONTROLLER

FAN CONTROL (BUILT IN) FACTORY INSTALLED OR FIELD INSTALLED

TC5102 OR TC5103

SUMMER FAN SWITCH FACTORY INSTALLED IN HEATER

STRATIFICATION THERMOSTAT FACTORY INSTALLED IN HEATER

TFS

TC1602

SUMMER FAN SWITCH REMOTE WALL MOUNTED

STRATIFICATION THERMOSTAT REMOTE WALL MOUNTED

WIRING DIA:DIMENSIONS: (LENGTHS FROM 28" TO 120")

SUBMITTED BY:APPROVED BY:

DATE:DATE:

BACK VIEW

STANDARD COLORS-WHITE OR IVORY.9100 SERIES

USC

ACCESSORIESOPTIONALAMPSVOLTSWATTSTAGCATALOG

NUMBERQTY

RADIUSEDFRONT 9100DRAFTBARRIERHEATER

HEATER DIMENSIONS: 3 1/8" DEEP, 4 12"HEIGHT, 28-120" LENGTHS.14 GAUGE EXTRUDED 6063 ALUINUM HEAT TREATED TO T5 HARDNESS.

UNITS CAN BE WALL MOUNTED WITH 3" CLEARANCE FROM FLOOR OR FLOORMOUNTED WITH OPTIONAL 3" PEDESTALS.

SUBMITTALUNI-LOCK CONSTRUCTION ALLOWS SNAP-FIT, 2 PIECE INSTALLATION

A MANUAL RESET THERMAL LINEAR LIMIT IS USED ALONG THE ENTIREHEATER LENGTH.

STAINLESS STEEL HEATING ELEMENT WITH ALUMINUM FINS.

GROUND

MAXIMUM SWITCH LOAD20 AMPS AT 120-277 VAC

THERMAL CUTOUT

GROUND

TO P

OW

ERSU

PPLY

DOUBLE POLESTAT

FOR SUPPLY CONNECTION USE90°C COPPER WIRE AS FOLLOWS

HEATING ELEMENT

HEATER AMPS 12 16 24AWG WIRE SIZE 14 12 10

SINGLE PHASE HEATER WITH DOUBLEPOLE THERMOSTAT AND DISCONNECT SWITCH

SINGLE PHASE HEATER

TO P

OW

ERSU

PPLY

TO P

OW

ERSU

PPLY

MAX AMPS 25,20 WITH DISCONNECTVOLTS-PHASE 120-208-240-277 1PHASE CONTROL SECTION REQ FOR RELAYSCONTROLS

THERMOSTAT-DISCONNECTOPTIONAL IN-BUILT14GA ALUMINUM

28-120" IN 1FT INCREMENTS34

CABINET MATERIAL

DEPTHHEIGHT 1/2

1/8LENGTH

MODEL DESIGNATION- 25096- - ITS PD-E 91

VO

LTA

GE

PR

EFIX

MO

DE

L S

ERIE

S

HEA

TER

LEN

GTH

WA

TTS

PER

FO

OT

CO

NTR

OL

OP

TIO

NS

AC

CES

SO

RIE

S

VOLTAGE PREFIX

H 240V

277VG

208VF

E 120V

HEATER LENGTHS

DISC.SW.

TO P

OW

ERSU

PPLY

AIR INTAKEAIR DISCHARGEMIN MOUNT HEIGHT

BOTTOMTOP

3INCHMAX WATTS/FOOT 250

(INCHES)28

36

48

60

10896

84

72

120

187

200

250

165

150

125

100

WATTS PER FOOT CONTROL OPTIONS

SEE CONTROLOPTONS CHART

PD=PEDESTALS

FACTORY INSTALLEDACCESSORIES

DR=DUPLEXRECEPTACLE

WM=14" WIRE MESH

SCREEN

NOTES:

91961 BBH-1 2000 208

DATE:DATE:

APPROVED BY:SUBMITTED BY:

9112BS 12"

9124BS 24"

36"

48"

9136BS

9148BS

9160BS 60"

BLANK SECTIONS

IDS

ITD

ITS

CS12

CS6

SUFFIX

PR277/24PR277/277

PR240/24

9100 SERIES CONTROLS & ACCESSORIES

ALIGNMENTPINS

OPTIONAL ENDCAP

NOTESCATALOGNUMBERQTY

INSIDE AND OUTSIDE CORNERS ARE6" ON LONGEST SIDES

INSIDE CORNEROUTSIDE CORNER

LENGTH

84"9184BS

72"9172BS

MODEL

6.0

6.0

9196BS

91108BS

91120BS

96"

108"

120"

120"

108"

96"

91120

91108

HEATER

60"

9172

9160

9148 48"

36"

28"

9136

9128

MODEL

9184

72"

9196

84"

LENGTH

DESCRIPTION

RIGHT OR LEFT END CAPOUTSIDE CORNER SECTION 90 OR 153*INSIDE CORNER SECTION 90 OR 135*

MODEL

9100IC

9100OC

9100EC

FIELD INSTALLED ACCESSORIES FACTORY INSTALLED ACCESSORIES

DR

MODEL

DUPLEX RECEPTACLE IN 4" EXTENDED ENCLOSURE

PR208/24PR208/208

ATR

6" CONTROL SECTION/WILL CONTAIN UP TO 2 CONTROL OPTIONS12" CONTROL SECTION/WILL CONTAIN UP TO 3 CONTROL OPTIONSSINGLE POLE, 25A IN-BUILT THERMOSTAT 120,208,240 & 277V

DOUBLE POLE, 25A IN-BUILT THERMOSTAT 120,208,240 & 277VDOUBLE POLE DISCONNECT, 20A, 120,208,240 & 277V

POWER RELAY FOR 277V HEATERS, 18A, LOW OR LINE VOLT COIL (SPECIFY)

SINGLE OR DOUBLE POLE (SPECIFY)POWER RELAY FOR 240V HEATERS, 18A, LOW OR LINE VOLT COIL (SPECIFY)

SINGLE OR DOUBLE POLE (SPECIFY)

POWER RELAY FOR 208V HEATERS, 18A, LOW OR LINE VOLT COIL (SPECIFY)SINGLE OR DOUBLE POLE (SPECIFY)

SINGLE POLE RELAY FOR 120V TO 277V HEATERS, RATED 25A,PLUS TRANSFORMER WITH 24V COILS

DESCRIPTION

DESCRIPTION

(NOT AVAILABLE IN 120" HEATER)

PDHEATER AND BLANK SECTIONS UP TO 60" 2EAHEATER AND BLANK SECTIONS UP TO 96" 3EAHEATER AND BLANK SECTIONS 108 AND LONGER 4EA

PD 1\4 MESH WIRE UNDER GRILL

SNAP FIT DETAIL