161

Grinding Jigs

SVM-45Knife Jig

For most knives. Minimum blade length 60 mm (2⅜"). Carvers draw knives.

0.20 kg0.44 lbs

SVM-00Small Knife Holder

Enables you to sharpen the smallest knives like chip carving knives and pocket knives. Works in conjunction with SVM-45.

0.11 kg0.25 lbs

SVM-140Long Knife Jig

Stabilizes a thin blade.Minimum blade length 160 mm (6¼").

0.27 kg0.60 lbs

SVX-150Scissors Jig

For scissors and shears.Also for portable electric hand planer blades.

0.43 kg0.94 lbs

SVA-170Axe Jig

For carving and carpenter’s axes.Max. axe size 170 mm (6½").

0.16 kg0.35 lbs

SVS-38 (SVS-32)Short Tool Jig

For straight shanked tools down to 45 mm (1¾") length. Also for power carvers. SVS-38: Max tool width 38 mm (1½"). SVS-32: Max tool width 32 mm (1¼").

0.17 kg0.38 lbs

SVD-186 (SVD-185)Gouge Jig

For fingernail shaped turning gouges.Bent carving gouges and curved V-tools.Max. width 36 mm (1⅜"). Also for turning cutters.

0.48 kg1.05 lbs

SVS-50Multi Jig

For turning skew chisels, parting and beading tools and roughing gouges. Straight shanked carving gouges up to 50 mm (2") width. Carving chisels.

0.26 kg0.58 lbs

SVD-110Tool Rest

For turning scrapers, screw drivers, cabinet scrapers, hollowing tools and spoke shave blades.

0.27 kg0.59 lbs

SE-77 (SE-76)Square Edge Jig

For plane irons and wood chisels. Aligns the tool automatically to its upper and flat side. With safety stops. Max tool width 77 mm (3").

0.63 kg1.38 lbs

SVH-320Planer Blade Attachment

For HSS blades of any length.Min. width 13 mm (½").Also for mitre guillotine blades.

1.85 kg4.10 lbs

Continues on the next page

162

TT-50Truing Tool

With screw feed. Trues the stone exactly round and flat.

0.26 kg0.58 lbs

SP-650Stone Grader

For grading the grindstone to a finer grit.Also for renewing a glazed stone.

0.40 kg0.88 lbs

WM-200AngleMaster

For setting and measuring of any edge angle from 10° to 75°. For any stone diameter from ∅ 250 mm (10") down to ∅ 150 mm (6").

0.063 kg0.14 lbs

TTS-100Turning Tool Setter

For an exact replication of the shape and edge angle on your gouges and skews when using the SVD-186 and the SVS-50.

0.19 kg0.42 lbs

PL-01Profile Labels

Set of 9 extra labels for noting the geometries on your gouges and skews.

0.01 kg0.02 lbs

PA-70Honing Compound

For the leather honing wheels. 0.09 kg0.20 lbs

LA-120Profiled Leather Honing Wheel

For inside honing and polishing of gouges and V-tools. With exchangeable leather discs. One with 3 mm (⅛") radius and one with a 60° tip.

0.26 kg0.57 lbs

LA-124Set of optional narrow discs

One with 2 mm (3/32") radius and one with a 45° tip.

0.068 kg0.15 lbs

MH-380Machine cover

For protecting the machine from wood dust. 0.15 kg0.33 lbs

Accessories

SVP-80Moulding Knife Attachment

Sharpens all makes and shapes of moulding knives with 24, 30 or 38 mm distance between guide hole centres. Max width 100 mm (4").

1.22 kg2.69 lbs

DBS-22Drill Bit Sharpening Attachment

For sharpening drill bits. 4-facet point for highest precision and efficiency. Separate instruction comes with the product.

3.30 kg7.28 lbs

Grinding Jigs continued

163

SG-250Original Grindstone

For the T-8/T-7 model. ∅ 250×50 mm. Developed to combine efficient steel removal, smooth surface finish and long life.

5.06 kg11.16 lbs

SG-200Original Grindstone

For the T-4/T-3 model. ∅ 200×40 mm. Developed to combine efficient steel removal, smooth surface finish and long life.

2.60 kg5.73 lbs

SB-250Blackstone Silicon

For the T-8/T-7 model. ∅ 250×50 mm. Delivers fast steel removal on HSS, exotic alloys and tools with large bevel area. It can also touch up carbide. 220 grit.

4.23 kg9.33 lbs

SJ-250Japanese Waterstone

For the T-8/T-7 model. ∅ 250×50 mm. Provides an extra fine surface finish on hand tools where a minimum of steel removal is needed.

5.23 kg11.53 lbs

SJ-200Japanese Waterstone

For the T-4/T-3 model. ∅ 200×40 mm. Provides an extra fine surface finish on hand tools where a minimum of steel removal is needed.

2.70 kg5.95 lbs

Grindstones

Accessories continued

HB-10Handbook

“Water Cooled Sharpening of Edge Tools.” 0.35 kg0.77 lbs

DVD 2.1The Tormek DVD

“Edge tool sharpening the Tormek way” 0.05 kg0.10 lbs

TNT-300Woodturner’s Instruction Box

Contains TNT DVD film and detailed handbook. Shows how to shape, sharpen and hone all your turning tools.

0.70 kg1.54 lbs

BGM-100Bench Grinder Mounting Set

For using the turning tool jigs SVD-186, SVS-50 and the Tool Rest SVD-110 on a bench grinder.

0.80 kg1.76 lbs

RB-180Rotating Base

Enables you to easily rotate the machine 180° and lock it with complete stability.

0.71 kg1.57 lbs

RM-533Rubber Work Mat

With the Tormek Rubber Work Mat you get a water proof yet non slip surface.

1.62 kg3.58 lbs