SURFACE-MOUNT DOOR CLOSER - Locksmith Reference GRADE 1 COMMERCIAL HEAVY DUTY SURFACE-MOUNT DOOR CLOSER

  • View
    3

  • Download
    0

Embed Size (px)

Text of SURFACE-MOUNT DOOR CLOSER - Locksmith Reference GRADE 1 COMMERCIAL HEAVY DUTY SURFACE-MOUNT DOOR...

  • SURFACE-MOUNT DOOR CLOSER

    D ate Feb. 11’

    D esign by W

    O RD

    ESIG N

    , inc. / 04.23159800 / w w

    w .w

    ord-tw .com

    Head Office & Factory 62, Chung Hsiao 1st Street, Hou-Hu-Li, Chia- Yi 600. Taiwan, R.O.C.

    Tel.886.5.2770017 / Fax.886.5.2767392

    Philippines Factory Tong Lung (Philippines) Metal Industry Co., Inc.

    No. 11 Aim High Ave, Cor. Commitment Street Subic Bay Gateway Park Phase 1, Subic Bay Freeport Zone, Olongapo City 2222 Philippines

    Tel:6347-252-6228 / 6208 / 6386 Fax:6347-252-6382

    Export Office 5th Fl.23, Hsin Hu 3rd RD., Neihu 114, Taipei ,Taiwan, R.O.C.

    Tel.886.2.27953558 / Fax.886.2.27955156

    www.ezset.com.tw

    THE FINEST LOCK

  • CONTENTS

    Introduction

    DO 4 Ser ies

    DO 2 Ser ies

    DO 3 Ser ies

    DO � Ser ies

    DO 5 Ser ies

    DC 6 Ser ies

    DC 7 Ser ies

    DC 8 Ser ies

    DC 8D Ser ies

    DM 7 Ser ies

    DM 8 Ser ies

    DC 9 Ser ies

    DS 7 Ser ies

    DS 8 Ser ies

    Commercial

    Residential

    Accessories

    6

    8

    �0

    �2

    �4

    �6

    �8

    20

    22

    24

    26

    28

    30

    32

    2

    34

  • INTRODUCTION2

    EZSET DOOR CLOSER THE MOST RELIABLE QUALITY AND CONVENIENT SOLUTION

    EZSET provides you a complete range of door closer options. With superior performance, EZSET door closers are specifically designed for commercial and residential applications. Following information will assist in choosing the perfect door closer to meet the unique opening needs.

    OVERVIEW

    Model : DO 2 Series .

    Bracket

    Arm Set

    Backcheck Control Valve Pinion Delay Action

    Control Valve

    Closing Speed Control Valve

    Cover

    FUNCTION

    Non Hold Open: Standard function. Non Hold Open Door Closer provides a smooth, controlled closing action to the door after the door has been opened and released.

    Backcheck: Hydraulic circuit designed to cushion the doors opening swing at about 75° in order to prevent the damage of doors by unexpected hitting.

    Delay Action: Delayed Action closing allows slow-moving traffic to clear the opening before the door closer’s normal closing cycle begins. This feature can be helpful in health care facilities. It provides sufficient time for persons on crutches or in wheelchairs to pass through a door without concern of it closing.

  • 3

    INSTALLATION

    Applications Basically, there are 3 applications for the door closer installation. Read the contents below to know more about the details.

    Parallel (Push Side)

    This application provides the most appealing design appearance for a surface-

    mounted door closer having a double lever arm. This also makes it beneficial in

    vandalism-prone areas.

    Regular (Pull Side) This is the only pull side application where a double lever arm is used. It is the most power-efficient application for a door closer. Sufficient frame, door and/or ceiling clearance must be considered.

    Top Jamb (Push Side) For efficiency reasons this application provides the best alternative to the regular arm application. There must be sufficient frame face and/or ceiling clearance for this application. This application provides the best door control for doors in exterior walls that swing out of a building

    3

  • INTRODUCTION4

    Right Hand DoorLeft Hand Door Right Hand DoorLeft Hand Door

    Door Handing Although many door closers are mostly non-handed, still some covers, arms or holding devices are handed.

    In such a case, the hand of the door should be specified. To determine the door handing, you may stand

    outside of the door, if the hinge is on the right hand side, then it is a right hand door; whereas the hinge is

    on the left hand side, it is a left hand door. (Please see the illustrations below).

  • 5

    BACKCHECK

    DELAY ACTION

    BACK CHECK

    DOOR

    HINGE

    CLOSING SPEED

    LATCHING SPEED

    1 2

    BACK CHECK ADJUSTING SCREW

    LATCHING SPEED VALVE(2)

    CLOSING SPEED VALVE(1)

    FAST SLOW

    DOOR CLOSER ADJUSTMENT

    Adjust the Power Size

    Use the hex key to adjust the closer power in order to match the conditions of

    the door. This function is only available for Non-sized closers.

    Spring Power Adjustmant

    Adjust the Door Closing Speed

    There are 2 valves to control the door closing of sweep speed and latch speed separately. (Model shown

    below is DC8 Series; the location of the valves depends on the type of closers.)

    Adjust the Backcheck / Delay Action

    Some models which provide Backcheck/Delay Action

    function are equipped with regulating valves for adjusting

    the Backcheck strength or delay closing speed.

    Warning: Please do not tighten or loosen the regulating

    valves completely .

  • 6 COMMERCIAL

    DO4 SERIES GRADE 1 COMMERCIAL HEAVY DUTY SURFACE-MOUNT DOOR CLOSER

    unit:m/m

    283 49

    25.5 28538

    38 25.5

    70

    51

    unit:m/m

    283 49

    25.5 28538

    38 25.5

    70

    51

    ORDERING INFORMATION

    DO - 0 4 16 B S - A

    0:Tri-Packed Arm, Non-Hold Open 1:Hold Open Arm 3:Cush Stop Arm 4:Cush Stop Hold Open Arm

    A:Full Size Cover

    4:DO 4 Series

    16:Adjustable Size 1 Thru 6

    A:Aluminum,B:Black, D:Duro,G:Golden, I:Ivory,W:White,S:Silver

    B:Backcheck D:Delay Action

    Category

    Function

    Model

    Power Size

    Features

    Finishes

    Cover

  • 7

    Material

    Cast Iron body, forged steel arm.

    Cover

    Full size plastic cover standard.

    Metal cover also available.

    Door Handing

    Non-Handed.

    Valves

    Adjustable latching and sweep speed valve.

    Adjustable Backcheck (BC) valve.

    Delayed action (DA) valve optional.

    (Backcheck is not available with Delay action

    for this model.)

    Power Size

    Non-sized, 1 thru 6.

    Opening Angle

    All standard arm applications allow doors to

    swing 180°, conditions permitting.

    Arms & Brackets

    Standard Tri-pack for regular arm, top jamb

    and parallel arm application.

    Additional arms optional.

    Arm Function

    Standard:Tri-Packed arm, Non-Hold open.

    Optional:Hold open arm.

    Cush stop arm.

    Cush stop hold open arm.

    Drop Plate ( Optional )

    Standard pull side;Parallel push side;

    Top jamb side;Top jamb centre push side;

    Fasteners

    Self tapping screws, machine screws and

    sex bolts standard packing.

    Finishes

    Aluminum (A), Black (B), Duro (D), Golden

    (G), Ivory (I), White (W), Silver (S), Bronze (6).

    SPECIFICATION

    CERTIFICATIONS

    ANSI/BHMA A156.4-2000 Grade 1 certified.

    Comply with ANSI A117.1 ADA requirements.

    UL/cUL Listed, 3 hours fire rated.

    UL10C, UBC 7-2(1997), UL 228.

    Door Width Ranges

    Applicable Door Weight Regular & Top Jamp Parallel Arm

    Size Interior Exterior

    Size Interior Exterior

    OutswingInswing Outswing

    � 28" ( 0.7�m ) - - � - - 33 ~ 66 Lbs (�5 ~ 30 Kg)

    2 36" ( 0.9�m ) - - 2 30" ( 0.76m ) - 66 ~ 99 Lbs (30 ~ 45 Kg)

    3 42" ( �.07m ) 30" ( 0.76m ) 36" ( 0.9�m ) 3 36" ( 0.9�m ) 30" ( 0.76m ) 99 ~ �43 Lbs (45 ~ 65 Kg)

    4 48" ( �.22m ) 36" ( 0.9�m ) 42" ( �.07m ) 4 42" ( �.07m ) 36" ( 0.9�m ) �43 ~ �87 Lbs (65 ~ 85 Kg)

    5 54" ( �.37m ) 42" ( �.07m ) 48" ( �.22m ) 5 48" ( �.22m ) 42" ( �.07m ) �87 ~ 264 Lbs (85 ~ �20 Kg)

    6 60" ( �.52m ) 48" ( �.22m ) 54" ( �.37m ) 6 54" ( �.37m) 48" ( �.22m ) 264 ~ 330 Lbs (�20 ~ �50 Kg)

    DOOR WIDTH & WEIGHTS

    0:Tri-Packed Arm, Non-Hold Open 1:Hold Open Arm 3:Cush Stop Arm 4:Cush Stop Hold Open Arm

  • 8 COMMERCIAL

    DO2 SERIES GRADE 1 COMMERCIAL HEAVY DUTY SURFACE-MOUNT DOOR CLOSER

    ORDERING INFORMATION

    DO - 0 2 16 A D - A

    0:Tri-Packed Arm, Non-Hold Open 1:Hold Open Arm 3:Cush Stop Arm 4:Cush Stop Hold Open Arm

    A:Full size Plastic Cover B:Slim-line Plastic Cover

    2:DO 2 Series

    16:Adjustable Size 1 Thru 6

    A:Aluminum,B:Black,D:Duro, G:Golden,I:Ivory,W:White, S:Silver

    A:Backcheck & Delay Action B:Backcheck D:Delay Action

    Category

    Function

    Model

    Power Size

    Features

    Finishes

    Cover

    315

    unit:m/m

    52

    44

    305

    325

    46 .5

    19

  • Material Aluminum alloy housing. Forged steel arm. Cover Full size plastic cover standard, Slim-line plastic cover optional. Metal cover also available. Mount Hole Dimension 305mm. Door Handing Non-Handed. Valves Adjustable latching and sweep speed valve. Adjustable Backcheck (BC) valve. Adjustable Delayed action (DA) valve optional. (Backcheck is available with Delay action

    for this model.)

    Power Size

    Non-sized, 1 thru 6.

    Opening Angle

    All standard arm applications allow doors to

    swing 180°, conditions permit