Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Document ID: 48094
Supplementary instructions
Welded socket, threaded and hygienic adapter
2
Contents
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Contents1 Product description ................................................................................................................. 4
2 Welded socket - universal ....................................................................................................... 62.1 Thread .............................................................................................................................. 62.2 Clamp ............................................................................................................................... 92.3 Slotted nut acc. to DIN 11851 ......................................................................................... 102.4 Slotted nut acc. to DIN 11864-1 ...................................................................................... 112.5 Furtherhygienicfittings .................................................................................................. 12
3 Welded socket - VEGABAR series 80 ................................................................................... 153.1 Thread ............................................................................................................................ 153.2 Extensionfitting-Paperindustry .................................................................................... 18
4 Welded socket – VEGASWING, VEGAVIB, VEGAKON, VEGAPOINT .................................. 214.1 VEGASWING 51, 61, 63 ................................................................................................ 214.2 VEGAVIB 61, 63 ............................................................................................................. 224.3 VEGAKON 61 ................................................................................................................. 234.4 VEGAPOINT10,20,30 .................................................................................................. 24
5 Threaded adapter - VEGAPULS 10, 20, 30 series ............................................................... 265.1 Plasticadapter ............................................................................................................... 26
6 Threaded adapter - VEGAPULS 64 ....................................................................................... 286.1 Plasticadapter ............................................................................................................... 286.2 Flanges according to EN 1092-1 .................................................................................... 296.3 Flanges according to ASME B16.5................................................................................. 316.4 Flanges according to EN 1092-1 .................................................................................... 32
7 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series ................................................. 357.1 Clamp according to DIN 32676, ISO 2852 ..................................................................... 357.2 Slotted nut acc. to DIN 11851 ......................................................................................... 377.3 Slotted nut acc. to DIN 11864-1 ...................................................................................... 407.4 Furtherhygienicfittings .................................................................................................. 43
8 Threaded adapter - VEGABAR 80 series ............................................................................. 458.1 Clamp according to DIN 32676, ISO 2852 ..................................................................... 458.2 Varivent .......................................................................................................................... 46
9 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE ...................................................... 489.1 VEGACAP63/64,VEGACAL63/64 ................................................................................ 489.2 VEGAWAVE ................................................................................................................... 52
10 Hygienic adapter - VEGABAR 20, 30 series, VEGAPOINT 10, 20 series ........................... 5610.1 Technical data, sealing concept ..................................................................................... 5610.2 Direct welded socket ...................................................................................................... 5710.3 Clamp according to DIN 32676, ISO 2852 ..................................................................... 6010.4 Slotted nut acc. to DIN 11851 ......................................................................................... 6210.5 Slotted nut acc. to DIN 11864-1 ...................................................................................... 6510.6 Furtherhygienicfittings .................................................................................................. 69
11 Hygienic adapter - VEGAPOINT 10, 20 series ..................................................................... 7511.1 Technical data, sealing concept ..................................................................................... 7511.2 Direct welded socket ...................................................................................................... 75
3
Contents
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
11.3 Clamp according to DIN 32676, ISO 2852 ..................................................................... 7611.4 Slotted nut acc. to DIN 11851 ......................................................................................... 7711.5 Slotted nut acc. to DIN 11864-1 ...................................................................................... 7911.6 Furtherhygienicfittings .................................................................................................. 81
12 Hygiene adapter - VEGAPULS 10, 20, 30 series ................................................................. 8512.1 Technical data, sealing concept ..................................................................................... 8512.2 Clamp according to DIN 32676, ISO 2852 ..................................................................... 8512.3 Slotted nut acc. to DIN 11851 ......................................................................................... 86
13 Welding, mounting ................................................................................................................. 8713.1 Welding instructions ....................................................................................................... 8713.2 Mounting instructions threaded and hygienic adapter .................................................... 88
Editing status: 2020-08-03
4
1Productdescription
Welded socket, threaded and hygienic adapter •
48094-EN-200804
1 Product descriptionWelded sockets are used for connection of sensors to the process.
1 2 3
Fig. 1: Function of a welded socket1 Vessel2 Welded socket3 Sensor
Threaded adapters are used to adapt sensors with threaded connec-tion to existing welded sockets.
1 2 3 4
Fig. 2: Function, threaded adapter1 Vessel2 Welded socket3 Adapter4 Sensor
Hygienic adapters are used to adapt sensors with threaded connec-tion and cone or O-ring to existing hygienic welded sockets.
Welded socket
Adapter
Hygienic adapter
5
1Productdescription
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
1 2 3 4Fig. 3: Function hygienic adapter1 Vessel2 Welded socket3 Hygienic adapter4 Sensor
A process seal is required to use the welded sockets or threaded adapters. Depending on the version, the process seal is included as an optional component in the scope of delivery of the welded socket or the sensor.
The welding sockets, threaded and hygienic adapters described here arenotsubjecttotheEUPressureEquipmentDirectiveiftheyareoperatedatprocesspressures≤200bar.
Process seal
Pressure device directive
6
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
48094-EN-200804
2 Welded socket - universal
2.1 Thread
Feature Characteristic
Size G½
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. 2.36839
Seal Sensor side
2,5�
mm
(0.1
")16
,5�m
m(0
.65"
)
G1/2
ø 32 mm(1.26")
ø 28 mm(1.1")
Fig. 4: Dimensions of welded socket, thread G½ (DIN 3852-X)
Feature Characteristic
Size G¾
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. 2.36840
Seal Sensor side
2,5�
mm
(0.1
")16
,5�m
m(0
.65"
)
ø 38 mm(1.5")
ø 33 mm(1.3")G3/4
Fig. 5: Dimensions of welded socket, thread G¾ (DIN 3852-X)
Feature Characteristic
Size G1
Thread G½
Thread G¾
Thread G1
7
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Feature Characteristic
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. 2.36841
Seal Sensor side
2,5�
mm
(0.1
")20
,5�m
m(0
.81"
)
ø 41 mm(1.61")
ø 47 mm(1.85")
G1
Fig. 6: Dimensions of welded socket, thread G1 (DIN 3852-X)
Feature Characteristic
Size G1½
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. 2.36842
Seal Sensor side
2,5
mm
(0.1
")24
,5 m
m(0
.97"
)
ø 56 mm(2.21")
ø 65 mm(2.56")
G1 1/2
Fig. 7: Dimensions of welded socket, thread G1½ (DIN 3852-X)
Part Feature Characteristic
Welded socket
Size G¾
Standard ISO 228-1
Material 316L
Productcode/Art.no. ESMD.A1X
Thread G1½
Thread G¾ - Hygienic design
8
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Seal Material FKM -30…+200°C/-22…+392°C
MaterialEPDM -40…+200°C/-40…+392°C
Configuration Seal ring acc. to DIN 3869
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9")
ø 40 mm (1.58")
G3/4
Fig. 8: Dimensions of welded socket, thread G¾ (ISO 228-1) - Hygienic design
Part Feature Characteristic
Welded socket
Size G1½
Standard ISO 228-1
Material 316L
Productcode/Art.no. ESMD.B1X
Seal Material FKM -30…+200°C/-22…+392°C
MaterialEPDM -40…+200°C/-40…+392°C
Material Kalrez 6375 -20…+150°C/-4…+302°C
Configuration Seal ring acc. to DIN 3869
Size 42 x 3 mm
Welding dummy
Material Brass
Blind plug Material 316L
30 m
m(1
.18"
)
ø 65 mm(2.56")
G1 1/2
Fig. 9: Dimensions of welded socket, thread G1½ (ISO 228-1) - Hygienic design
Thread G1½ - Hygienic design
9
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
2.2 Clamp
Component Feature Characteristic
Welded socket
Size 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. ESTC.B3SX
Tension ring Pressurestage PN16,PN40
Material 316L
Seal Material EPDM,FKM
Configuration Seal ring
21,5
mm
(0.8
5")
ø 34,8 mm(1.37")
ø 38,1 mm(1.50")
ø 50,5 mm(1.99")
Fig. 10: Dimensions of welded socket, Clamp 1½" (DIN 32676, ISO 2852) PN 16
Component Feature Characteristic
Welded socket
Size 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. ESTC.C3SX
Tension ring Pressurestage PN16,PN40
Material 316L
Seal Material EPDM,FKM
Configuration Seal ring
Clamp 1½"
Clamp 2"
10
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
48094-EN-200804
21,5
mm
(0.8
5")
ø 47,5 mm(1.87")
ø 50,8 mm(2.00")
ø 64 mm(2.52")
Fig. 11: Dimensions of welded socket, Clamp 2" (DIN 32676, ISO 2852) PN 16
2.3 Slotted nut acc. to DIN 11851
Component Feature Characteristic
Welded socket
Size DN 40
Standard DIN 11851
Pressurestage PN40
Material 316L
Productcode/Art.no. ESTR.FA3X
Seal Material FKM,EPDM,NBR
Configuration Seal ring
33 m
m(1
.3")
ø 43 mm(1.69")
ø 38 mm(1.5")
Rd 65 x 1/6
Fig. 12: Dimensions of welded socket, slotted nut DN 40 (DIN 11851)
Component Feature Characteristic
Welded socket
Size DN 50
Slotted nut DN 40
Slotted nut DN 50
11
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Component Feature Characteristic
Standard DIN 11851
Pressurestage PN25
Material 316L
Productcode/Art.no. ESTR.GA3X
Seal Material FKM,EPDM,NBR
Configuration Seal ring
Rd 78 x 1/6
35 m
m(1
.38"
)
ø 50 mm(1.97")
ø 55 mm(2.17")
Fig. 13: Dimensions of welded socket, slotted nut DN 50 (DIN 11851)
2.4 Slotted nut acc. to DIN 11864-1
Component Feature Characteristic
Welded socket
Size DN 40
Standard DIN 11864-1
Pressurestage PN25
Material 316L
Productcode/Art.no. ESTR.FBXX
Seal From the user side
ø 38mm(1.50")
31m
m(1
.22"
)
ø 41mm(1.61")
Rd 65 x 1/6
Fig. 14: Dimensions of welded socket, slotted nut DN 40 (DIN 11864-1)
Slotted nut DN 40
12
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Component Feature Characteristic
Welded socket
Size DN 50
Standard DIN 11864-1
Pressurestage PN16
Material 316L
Productcode/Art.no. ESTR.GBXX
Seal From the user side
ø 50 mm(1.97")
35 m
m(1
.38"
)
ø 53 mm(2.09")
Rd 78 x 1/6
Fig. 15: Dimensions of welded socket, slotted nut DN 50 (DIN 11864-1)
2.5 Furtherhygienicfittings
Component Feature Characteristic
Welded socket
Size Rd65x1/6
Standard -
Pressurestage PN25
Material 316L
Productcode/Art.no. ESTA.LA3XXX
Seal Material EPDM
Configuration O-ring
Size 40 x 5 mm
Welding dummy
Material Brass
Blind plug Material 316L
Slotted nut DN 50
Hygienic connection F40 with compression nut
13
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
40 m
m(1
.58"
)
ø 79,6 mm(3.13")
Rd 65 x 1/6
Fig. 16: Dimensions of welded socket, hygienic fitting F40 with compression nut
Component Feature Characteristic
Welded socket
Size ø 90
Standard -
Pressurestage PN25
Material 316L
Productcode/Art.no. ESTA.LBXXX
Seal Material EPDM
Configuration O-ring
Size 40 x 5 mm
Welding dummy
Material Brass
Blind plug Material 316L
40 m
m(1
.58"
)
ø 79,6 mm(3.13")
ø 72 mm(2.84")
ø 90 mm(1.54")
M6
Fig. 17: Dimensions of welded socket, hygienic fitting DN 32 with tension flange
Component Feature Characteristic
Welded socket
Size ø 105
HygienicfittingDN32withtensionflange
DRD connection
14
2 Welded socket - universal
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Component Feature Characteristic
Standard -
Pressurestage PN40
Material 316L
Productcode/Art.no. ESTD.AAXX
Seal Material PTFE
Configuration Flat seal
Size 50 x 66 x 1 mm20
mm
(0.7
9")
ø 84 mm (3.31")
ø 66 mm (2.6")
ø 105 mm (4.13")
M10
ø 125 mm (4.92")
ø 50 mm (1.97")
Fig. 18: Dimensions of welded socket, DRD
Component Feature Characteristic
Welded socket
Size DN 25
Standard -
Pressurestage -
Material 316Ti
Productcode/Art.no. ESTK.KAXX
Seal Material EPDM
Configuration O-ring
Size 30 x 3 mm
Rd 52 x 1/6
25 m
m(0
.98"
)
ø 75 mm(2.95")
Fig. 19: Dimensions of welded socket, conus connection DN 25
Cone connection DN 25/Rd52 x 2
15
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
3 Welded socket - VEGABAR series 80
3.1 Thread
Part Feature Characteristic
Welded socket
Size G½
Standard EN 837
Material 316L
Productcode/Art.no. WDSB80.DUXXXX
Seal Material Klingersil C-4400
Configuration Flat seal
Size 21 x 30 x 2 mm
Welding dummy
Material Brass
Blind plug Material 316L
34 m
m(1
.34"
)
G 1/2
ø 30 mm (1.18")
Fig. 20: Dimensions of welded socket, thread G½ (EN 837) - manometer con-nection - VEGABAR 81, 82, 83
Part Feature Characteristic
Welded socket
Size G½
Standard ISO 228-1
Material 316L
Productcode/Art.no. WDSB80.C3XXXX
Seal Material FKM
Configuration Seal ring acc. to DIN 3869
Size 18.5 x 23.9 x 1.5 mm
Welding dummy
Material Brass
Blind plug Material 316L
Thread G½ - manometer connection
ThreadG½-front-flush
16
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
48094-EN-200804
G1/2
ø 18,5mm(0.73")
21m
m(0
.83"
)
10,5
mm
(0.4
1")
ø 30mm(1.18")
Fig. 21: Dimensions welded socket G½ (ISO 228-1), front-flush - VEGABAR 82
Part Feature Characteristic
Welded socket
Size G¾
Standard DIN 3852-E
Material 316L
Productcode/Art.no. WDSB80.N9XXXX
Seal Material FKM,EPDM,FFKM,KlingersilC-4400
Configuration Seal ring acc. to DIN 3869
Size 23.47 x 2.62 mm
Welding dummy
Material Brass
Blind plug Material 316L
22,5
mm
(0.8
9")
ø 40 mm (1.58")
G3/4
Fig. 22: Dimensions of welded socket, G¾ (DIN 3852-X) - VEGABAR 82
Part Feature Characteristic
Welded socket
Size G1
Standard ISO 228-1
Material 316L
Productcode/Art.no. WDSB80.C5XXXX
Seal Material Klingersil C-4400
Configuration Flat seal
Size 33 x 39 x 2 mm
Thread G¾
Thread G1
17
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Welding dummy
Material Brass
Blind plug Material 316L
21 m
m(0
.83"
)
ø 50 mm (1.97")
G 1
ø 30 mm (1.18")
Fig. 23: Dimensions of welded socket, G1 (ISO 228-1) - VEGABAR 82, 83
Part Feature Characteristic
Welded socket
Size G1½
Standard DIN 3852-A
Material 316L
Productcode/Art.no. WDSB80.DAXXXX
Seal Material Klingersil C-4400
Configuration Flat seal
Size 48 x 55 x 2 mm
Welding dummy
Material Brass
Blind plug Material 316L
2,5
mm
(0.1
")24
,5 m
m(0
.97"
)
ø 56 mm(2.21")
ø 65 mm(2.56")
G1 1/2
Fig. 24: Dimensions of welded socket, thread G1½ (EN 837) - VEGABAR 82, 83, 86, 87
Thread G1½
18
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
48094-EN-200804
3.2 Extensionfitting-Paperindustry
Part Feature Characteristic
Welded socket
Size M30 x 1.5
Standard DIN 13
Material 316L
Productcode/Art.no. WDSB80.ALXXXX(completelyfront-flush)WDSB80.APXXXX(forheadbox)
Seal Material FKM,EPDM,FFKM
Configuration Seal ring
Size 20.35 x 1.78 mm
Welding dummy
Material Brass
Blind plug Material 316L
M30x1,5
15m
m(0
.59"
)
23m
m(0
.91"
)ø 40mm(1.58")
ø 25mm(0.98")
Fig. 25: Dimensions of welded socket, M30 x 1.5 - VEGABAR 82
Part Feature Characteristic
Welded socket
Size M44 x 1.25
Standard DIN 13
Material,processfitting 316L,AlloyC22
Material, pressure screw Aluminium,316L
Productcode/Art.no. WDSB80.AFXXXX
Seal Material FKM,EPDM,FFKM
Configuration Seal ring
Size 40 x 2 mm
Welding dummy
Material Brass
Blind plug Material 316L
M30 x 1.5
M44 x 1.25
19
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
21m
m(0
.83"
)
ø 60mm(2.36")
M44x1,25
Fig. 26: Dimensions of welded socket, M44 x 1.25 - VEGABAR 82, 83
Data - Version with metallic seal:Part Feature Characteristic
Welded socket
Size G1
Standard ISO 228-1
Material 316L
Productcode/Art.no. WDSB80.XXXXXX
Welding dummy
Material Brass
Blind plug Material 316L
Additional data - Version with O-ring seal:Part Feature Characteristic
Seal Material FKM,EPDM,FFKM
Configuration Seal ring
Size 18.77 x 1.78 mm
ø 45 mm(1.77")
G1
70
mm
(2
.76"
) 38,
5 m
m
(1.5
2")
Fig. 27: Dimensions welded socket G1 suitable for PASVE (for the two previ-ously listed versions) - VEGABAR 82
G1 suitable for PASVE
20
3 Welded socket - VEGABAR series 80
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Welded socket
Size 1"
Standard -
Material 316L
Productcode/Art.no. WDSB80.EMW1XX
Seal Material FKM,EPDM,FFKM,PTFE
Size ø 20.22 x 3.53 mm
Welding dummy
Material Brass
25 m
m(0
.98"
)
ø 8
mm
(0.3
2")
17,6
mm
(0.6
9")
33,4 mm (1.32")
26,7 mm (1.05")
Fig. 28: Dimensions of welded socket, PMC 1" VEGABAR 82
PMC 1"
21
4Weldedsocket–VEGASWING,VEGAVIB,VEGAKON,VEGAPOINT
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
4 Welded socket – VEGASWING, VEGAVIB, VEGAKON, VEGAPOINT
4.1 VEGASWING 51, 61, 63
Part Feature Characteristic
Welded socket
Size G¾
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. ESTSG.1GBXX
Seal Material FKM,EPDM,FFKMPerlastG75B78
Configuration O-ring
Size 21 x 3 mm
26�m
m (1
.02"
)
ø 53 mm(2.09")
ø 32 mm(1.26")G 3/4
Fig. 29: Dimensions of welded socket, G¾ (DIN 3852-X)
Part Feature Characteristic
Welded socket
Size G1
Standard DIN 3852-X
Pressurestage PN60
Material 316L
Productcode/Art.no. ESTSG.1GAXX
Seal Material FKM,EPDM
Configuration O-ring
Size 21 x 3 mm
Thread G¾
Thread G1
22
4Weldedsocket–VEGASWING,VEGAVIB,VEGAKON,VEGAPOINT
Welded socket, threaded and hygienic adapter •
48094-EN-200804
29 m
m(1
.14"
)
G 1
ø 60 mm (2.36")
ø 39 mm (1.54 ")
Fig. 30: Dimensions of welded socket, G1 (DIN 3852-X)
4.2 VEGAVIB 61, 63
Part Feature Characteristic
Welded socket
Size G1
Standard DIN 3852-A
Pressurestage PN16
Material 316L
Productcode/Art.no. ESTVB.GCRXX
Seal Material EPDM70ShoreA,FDAapproved
Configuration O-ring
Size 28 x 3.5 mm36
mm
(1.4
2")
G 1
ø 60 mm (2.36")
ø 39 mm (1.54 ")
Fig. 31: Dimensions of welded socket, G1 (DIN 3852-A)
Thread G1
23
4Weldedsocket–VEGASWING,VEGAVIB,VEGAKON,VEGAPOINT
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Welded socket
Size G1½
Standard DIN 3852-A
Pressurestage PN16
Material 316L
Productcode/Art.no. ESTVB.GDUXX
Seal Material EPDM70ShoreA,FDAapproved
Configuration O-ring
Size 28 x 3.5 mm
43 m
m(1
.69"
)
G 1 1/2
ø 80 mm (3.15")
ø 59 mm (2.33 ")
Fig. 32: Dimensions of welded socket, G1½ (DIN 3852-A)
4.3 VEGAKON 61
Feature Characteristic
Size G1
Standard DIN 3852-X
Pressurestage PN25
Material 316Ti
Productcode/Art.no. ESTKN.1GA
Seal Klingersil C-440033 x 39 x 2 mm
Thread G1½
Thread G1
24
4Weldedsocket–VEGASWING,VEGAVIB,VEGAKON,VEGAPOINT
Welded socket, threaded and hygienic adapter •
48094-EN-200804
21 m
m(0
.83"
)
ø 47 mm (1.85")
G 1
ø 40 mm (1.58")
Fig. 33: Dimensions of welded socket, G1 (DIN 3852-X)
Feature Characteristic
Size G1
Standard DIN 3852-X
Pressurestage PN25
Material 316Ti
Productcode/Art.no. ESTKN.1GL
Seal EPDM70ShoreA,FDAapproved28 x 3.5 mm
30,5
mm
(1.2
0")
ø 60 mm (2.36")
G 1
ø 30 mm (1.18")
ø 39 mm (1.54")
Fig. 34: Dimensions of welded socket, G1 (DIN 3852-X) - suitable for foodstuffs
4.4 VEGAPOINT 10, 20, 30
Feature Characteristic
Size G1
Standard DIN 3852-A
Pressurestage PN25
Material 316L
Thread G1 - suitable for foodstuffs
Thread G½ - L = 15 mm
25
4Weldedsocket–VEGASWING,VEGAVIB,VEGAKON,VEGAPOINT
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Feature Characteristic
Productcode/Art.no. ESTVP.1ABXXX
Seal FKM,EPDM
15 m
m(0
.59"
)
G1/2
ø 26,5 mm(1.04")
Fig. 35: Dimensions welded socket G1 (DIN 3852-A) - L = 15 mm
Feature Characteristic
Size G1
Standard DIN 3852-A
Pressurestage PN25
Material 316L
Productcode/Art.no. ESTVP.1AAXXX
Seal FKM,EPDM25
mm
(0.9
8")
G1/2
ø 26,5 mm(1.04")
Fig. 36: Dimensions welded socket G1 (DIN 3852-A) - L = 25 mm
Thread G½ - L = 25 mm
26
5Threadedadapter-VEGAPULS10,20,30series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
5 Threaded adapter - VEGAPULS 10, 20, 30 series
5.1 Plastic adapter
Part Feature Characteristic
Adapter Size, sensor side G1½
Size, process side G2
Standard DIN 3852-X
Material PP
Pressurestage unpressurized 0.2 bar
Processtemperature -40…+80°C(-40…+176°F)
Max. torque 5Nm(3.688lbfft)
Productcode/Art.no. GEWADA-G.G
Seal Material FKM
Configuration Flat seal
Size ø 68 x 59 x 2.5 mm
Fig. 37: Dimensions of threaded adapter G1½ (DIN 3852-X) on thread G2 (DIN 3852-X)
Thread G1½ - Thread G2
27
5Threadedadapter-VEGAPULS10,20,30series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Adapter Size, sensor side 1½"NPT
Size, process side 2"NPT
Material PP
Pressurestage unpressurized 0.2 bar
Processtemperature -40…+80°C(-40…+176°F)
Max. torque 5Nm(3.688lbfft)
Productcode/Art.no. GEWADA-G.N
Fig. 38: Dimensions, threaded adapter 1½"NPT on thread 2"NPT
Thread 1½"NPT - Thread 2"NPT
28
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
48094-EN-200804
6 Threaded adapter - VEGAPULS 64
6.1 Plastic adapter
Part Feature Characteristic
Adapter Size, sensor side G1½
Size, process side G1½
Standard DIN 3852-X
Material PTFE
Pressurestage unpressurized 0.2 bar
Processtemperature -40…+130°C(-40…+266°F)
Max. torque 5Nm(3.688lbfft)
Productcode/Art.no. GEWADA-F.TC4T1
Seal, sensor side
Material FKMSHSFPM70C3GLT
Configuration O-ring seal
Size 48 x 2 mm
Seal, pro-cess side
Material FKMSHSFPM70C3GLT
Configuration Flat seal
Size ø 58 x 47 x 2 mm
Fig. 39: Dimensions of threaded adapter G1½ (DIN 3852-X) on thread G1½, G2 (DIN 3852-X)
Thread G1½ - Thread G1½
29
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Adapter Size, sensor side G1½
Size, process side G2
Standard DIN 3852-X
Material PTFE
Pressurestage unpressurized 0.2 bar
Processtemperature -40…+130°C(-40…+266°F)
Max. torque 5Nm(3.688lbfft)
Productcode/Art.no. GEWADA-F.TC4T3
Seal, sensor side
Material FKMSHSFPM70C3GLT
Configuration O-ring seal
Size 48 x 2 mm
Seal, pro-cess side
Material FKMSHSFPM70C3GLT
Configuration Flat seal
Size ø 68 x 59 x 2.5 mm
Fig. 40: Dimensions of threaded adapter G1½ (DIN 3852-X) on thread G2 (DIN 3852-X)
6.2 Flanges according to EN 1092-1
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard EN 1092-1, Form B1
Pressurestage PN40
Material 316L
Productcode/Art.no. GEWADA-F.TA1AC
Thread G1½ on thread G2
Thread G¾ - Flange DN 40 - Form B1
30
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 23.47 x 2.62 mm
G 3/4
ø32 mm(1.26")
ø18 mm(0.71")
ø110 mm(4.33")
ø150 mm(5.91")
22,5
mm
(0.8
6")
3 m
m(0
.12"
)
Fig. 41: Dimensions of threaded adapter G¾ (DIN 3852-X) on flange DN 40 (EN 1092-1, Form B1) PN 40
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard EN 1092-1, Form B1
Pressurestage PN40
Material 316L
Productcode/Art.no. GEWADA-F.TC1AC
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 42 x 3 mm
G1½ - Flange DN 40 - Form B1
31
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
G 1 ½
ø55 mm(2.17")
ø18 mm(0.71")
ø110 mm(4.33")
ø150 mm(5.91")
30 m
m(1
.18"
)3
mm
(0.1
2")
Fig. 42: Dimensions of threaded adapter G1½ (DIN 3852-X) on flange DN 40 (EN 1092-1, Form B1) PN 40
6.3 Flanges according to ASME B16.5
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side 1½"
Standard ASME B16.5, RF
Pressurestage 150 lb
Material 316L
Productcode/Art.no. GEWADA-F.TA1AH
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 23.47 x 2.62 mm
G 3/4
ø32 mm(1.26")
ø15,7 mm(0.62")
ø73,2 mm(2.88")
ø98,6 mm(3.88")
ø127 mm(5.00")
22,5
mm
(0.8
6")
1,6
mm
(0.0
6")
Fig. 43: Dimensions of threaded adapter G¾ (DIN 3852-X) on flange 1½" (ASME B16.5, RF) 150 lb
ThreadG¾onflange1½" - RF
32
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side 1½"
Standard ASME B16.5, RF
Pressurestage 150 lb
Material 316L
Productcode/Art.no. GEWADA-F.TC1AH
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 42 x 3 mm
G 3/4
ø32 mm(1.26")
ø15,7 mm(0.62")
ø73,2 mm(2.88")
ø98,6 mm(3.88")
ø127 mm(5.00")
22,5
mm
(0.8
6")
1,6
mm
(0.0
6")
Fig. 44: Dimensions of threaded adapter G¾ (DIN 3852-X) on flange 1½" (ASME B16.5, RF) 150 lb
6.4 Flanges according to EN 1092-1
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard EN 1092-1, Form B1
Pressurestage PN40
Material 316L
Productcode/Art.no. GEWADA-F.TA1AC
ThreadG1½onflange1½" - RF
ThreadG¾onflangeDN 40 - Form B1
33
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 23.47 x 2.62 mm
G 3/4
ø32 mm(1.26")
ø18 mm(0.71")
ø110 mm(4.33")
ø150 mm(5.91")
22,5
mm
(0.8
6")
3 m
m(0
.12"
)
Fig. 45: Dimensions of threaded adapter G¾ (DIN 3852-X) on flange DN 40 (EN 1092-1, Form B1) PN 40
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard EN 1092-1, Form B1
Pressurestage PN40
Material 316L
Productcode/Art.no. GEWADA-F.TC1AC
Seal MaterialFKMSHSFPM70C3GLT
-40…+200°C/-40…+392°F
MaterialEPDMA+P70.10-02
-40…+130°C/-40…+266°F
Material FFKM Kalrez 6375
-40…+200°C/-40…+392°F
Configuration Seal ring
Size 42 x 3 mm
ThreadG1½onflangeDN 40 - Form B1
34
6Threadedadapter-VEGAPULS64
Welded socket, threaded and hygienic adapter •
48094-EN-200804
G 1 ½
ø55 mm(2.17")
ø18 mm(0.71")
ø110 mm(4.33")
ø150 mm(5.91")
30 m
m(1
.18"
)3
mm
(0.1
2")
Fig. 46: Dimensions of threaded adapter G1½ (DIN 3852-X) on flange DN 40 (EN 1092-1, Form B1) PN 40
35
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
7 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
7.1 Clamp according to DIN 32676, ISO 2852
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.CG3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm22
,5 m
m(0
.89
")
G 3/4
ø 50,5 mm (1.99")
ø 32 mm (1.26")
Fig. 47: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
G¾ - Clamp 1½"
36
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Data:Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.CA3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9")
G 3/4
ø 64 mm (2.52")
ø 32 mm (1.26")
Fig. 48: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Data:Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-B.CA3
G¾ - Clamp 2"
G1½ - Clamp 2"
37
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Seal MaterialEPDMFDA -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-30…200°C/-22…392°F
Configuration O-ring seal
Size 42 x 3 mm
31 m
m(1
.22"
)
G 1 1/2
ø 55 mm (2.17")
ø 64 mm (2.52")
Fig. 49: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
7.2 Slotted nut acc. to DIN 11851
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.RA3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
G¾ - Slotted nut DN 40
38
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
30,5
mm
(1.2
0")
G 3/4
ø 56 mm (2.21")
ø 65 mm (2.56")
ø 78 mm (3.07")
ø 32 mm (1.26")
Fig. 50: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.RB3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
G¾ - Slotted nut DN 50
39
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 51: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-B.RB3
Seal MaterialEPDMFDA -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-30…200°C/-22…392°F
Configuration O-ring seal
Size 42 x 3 mm
G1½ - Slotted nut DN 50
40
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
38 m
m(1
.46"
)
G 1 1/2
ø 55 mm (2.17")
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 86 mm (2.68")
Fig. 52: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
7.3 Slotted nut acc. to DIN 11864-1
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.RE3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
G¾ - Slotted nut DN 40
41
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
34 m
m(1
.34
")
G 3/4
ø 78 mm (3.07")
ø 65 mm (2.56")
ø 55 mm (2.17")
ø 32 mm (1.26")
Fig. 53: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11864-1) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.RF3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
G¾ - Slotted nut DN 50
42
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
34 m
m(1
.34
")
G 3/4
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 32 mm (1.26")
Fig. 54: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-B.RF3
Seal MaterialEPDMFDA -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-30…200°C/-22…392°F
Configuration O-ring seal
Size 42 x 3 mm
G1½ - Slotted nut DN 50
43
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
42 m
m(1
.65
")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 92 mm (3.62")
G 1 1/2
ø 55 mm (2.17")
Fig. 55: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
7.4 Furtherhygienicfittings
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side -
Standard DRD
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.AA3
Seal MaterialEPDM -40…150°C/-40…302°F
Material Viton -30…200°C/-22…392°F
Material FFKM Kalrez 6375
-20…200°C/-4…392°F
MaterialFFKMPerlastG75S FDA+3A
-15…200°C/-5…392°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
G¾ - DRD connection
44
7Threadedadapter-VEGAPULS64,VEGAFLEX80series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
22,5
mm
(0.8
9")
G 3/4
ø 65,8 mm (2.59")
ø 54 mm (2.13")
Fig. 56: Dimensions adapter G¾ (DIN 3852-X) on DRD
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 32
Standard Tuchenhagen
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-A.TA3
Seal MaterialEPDM -40…150°C/-40…302°F
Configuration O-ring seal
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9")
G 3/4
ø 71 mm (2.8")
ø 84 mm (3.31")
ø 32 mm (1.26")
Fig. 57: Dimensions adapter G¾ (DIN 3852-X) on Tuchenhagen DN 32
G¾ - Varivent DN 32
45
8 Threaded adapter - VEGABAR 80 series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
8 Threaded adapter - VEGABAR 80 series
8.1 Clamp according to DIN 32676, ISO 2852
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-D.GLX
Seal Sensor side -
25,5
mm
(1.0
0 ")
G 1
ø 50,5 mm (1.99")
ø 29,3 mm (1.15")
GL
Fig. 58: Dimensions of threaded adapter G1 (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-D.GMX
Seal Sensor side -
G1 - Clamp 1½"
G1 - Clamp 2"
46
8 Threaded adapter - VEGABAR 80 series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
25,5
mm
(1.0
0 ")
G 1
ø 64 mm (2.52")
ø 29,3 mm (1.15")
G
Fig. 59: Dimensions of threaded adapter G1 (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
8.2 Varivent
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side DN25/32
Standard Varivent
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-D.GNX
Seal Sensor side -
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 66 mm (2.60")
ø 50 mm (1.97")
ø 29,3 mm (1.15")
GN
Fig. 60: Dimensions of threaded adapter G1 (DIN 3852-X) on Varivent Form F 25
G1 - Varivent Form F 25
47
8 Threaded adapter - VEGABAR 80 series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side DN40/50
Standard Varivent
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-D.GOX
Seal Sensor side -
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 84 mm (3.31")
ø 68 mm (2.68")
ø 29,3 mm (1.15")
GO
Fig. 61: Dimensions of threaded adapter G1 (DIN 3852-X) on Varivent Form N 50-40
G1 - Varivent Form N 50-40
48
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
48094-EN-200804
9 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
9.1 VEGACAP 63/64, VEGACAL 63/64
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-E.GE3
Seal MaterialEPDM -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-10…120°C/-14…248°F
Configuration Seal ring
Size ø 50.5 - 35.3 mm
22,5
mm
(0.8
9 ")
G 3/4
ø 50,5 mm (1.99")
ø 32 mm (1.26")
Fig. 62: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-E.CA3
G¾ - Clamp 1½"
G¾ - Clamp 2"
49
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Seal MaterialEPDM -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-10…120°C/-14…248°F
Configuration Seal ring
Size ø 64 - 48 mm
22,5
mm
(0.8
9")
G 3/4
ø 64 mm (2.52")
ø 32 mm (1.26")
Fig. 63: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 25
Standard DIN 11851
Pressurestage PN25
Material 316L
Productcode/Art.no. GEWADA-E.CB3
Seal MaterialEPDM -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-10…120°C/-14…248°F
Configuration Seal ring
Size ø 54 x 64 x 5 mm
G¾ - Slotted nut DN 25
50
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
48094-EN-200804
36 m
m(1
.42
")
G 3/4
ø 43,4 mm (1.71")
ø 52 mm (2.05")
ø 63 mm (2.44")
ø 32 mm (1.26")
Fig. 64: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 25 (DIN 11851) PN 25
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN25
Material 316L
Productcode/Art.no. GEWADA-E.CBX
Seal MaterialEPDM -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-10…120°C/-14…248°F
Configuration Seal ring
Size ø 54 x 64 x 5 mm
G¾ - Slotted nut DN 50
51
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 65: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 25
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-E.LA3
Seal MaterialEPDM -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-10…120°C/-14…248°F
Configuration Seal ring
Size ø 54 x 64 x 5 mm
G¾ - Hygienic connection with comp
52
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
48094-EN-200804
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 66: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
9.2 VEGAWAVE
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-C.CA1
Seal MaterialEPDMFDA -40…200°C/-40…392°F
Material Viton FDA -30…200°C/-22…392°F
Configuration Seal ring
Size ø 64 - 48 mm
G1½ - Clamp 2"
53
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Dimensions:
31 m
m(1
.22"
)
G 1 1/2
ø 55 mm (2.17")
ø 64 mm (2.52")
Fig. 67: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2½"
Standard DIN 32676, ISO 2852
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-C.CD3
Seal MaterialEPDMFDA -40…200°C/-40…392°F
Material Viton FDA -30…200°C/-22…392°F
Configuration Seal ring
Size ø 77.5 - 60.7 mm
31 m
m(1
.22"
)
G 1 1/2
ø 55 mm (2.17")
ø 77,5 mm (3.05")
Fig. 68: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2½" (DIN 32676, ISO 2852) PN 16
G1½ - Clamp 2½"
54
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-B.RB3
Seal MaterialEPDMFDA -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-30…200°C/-22…392°F
Configuration Seal ring
Size ø 54 x 64 x 5 mm
38 m
m(1
.46"
)
G 1 1/2
ø 55 mm (2.17")
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 86 mm (2.68")
Fig. 69: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
Data:Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN16
Material 316L
Productcode/Art.no. GEWADA-B.RF3
G1½ - Slotted nut DN 50 - DIN 11851
G1½ - Slotted nut DN 50 - DIN 11864-1
55
9Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Seal MaterialEPDMFDA -40…150°C/-40…302°F
Material FKM Vi 780 FDA
-30…200°C/-22…392°F
Configuration Seal ring
Size ø 54 x 64 x 5 mm
42 m
m(1
.65
")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 92 mm (3.62")
G 1 1/2
ø 55 mm (2.17")
Fig. 70: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
56
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
10 Hygienic adapter - VEGABAR 20, 30 series, VEGAPOINT 10, 20 series
10.1 Technical data, sealing concept
Feature Characteristic
Hygienic adapter
Material 1.4435
Surface Ra≤0.76µm
Hygienecertificate FDA,EG1935/2004
Torque max. Cone seal 100Nm(73.76lbfft)
O-ring seal 50Nm(36.88lbfft)
32 1Fig. 71: Cone seal G1 VEGABAR metal/metal1 Sensor2 Hygienic adapter3 Seal metal/metal
342 1Fig. 72: Cone seal G1 VEGAPOINT plastic/metal plus metal/metal1 Sensor2 Hygienic adapter3 Seal plastic/metal4 Seal metal/metal
Common technical data
Sealing concept metal/metal
57
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
2 1 3Fig. 73: O-ring seal G1 VEGABAR1 Sensor2 Hygienic adapter3 O-ring seal
2 1 3Fig. 74: O-ring seal G1 VEGAPOINT1 Sensor2 Hygienic adapter3 O-ring seal
10.2 Direct welded socket
Part Feature Characteristic
Welded socket
Size G1 B
Standard ISO 228-1
Productcode/Art.no. HYGADAPT-C.X7F
Seal Conesealmetal/metal
21 m
m(0
.83"
)
ø 50 mm (1.97")
G 1
Fig. 75: Dimensions direct welded socket G1 - Cone seal
Sealing concept O-ring
Thread G1 - Cone seal
58
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Welded socket
Size G1 B
Standard ISO 228-1
Material 1.4435
Surface Ra≤0.76µm
Additional hygiene cer-tificate
EHEDG, 3A 1)
Productcode/Art.no. HYGADAPT-L.X7F
Seal O-ring seal
25,5
mm
(1.0
0")
G 1
ø 29,3 mm(1.15")
ø 50 mm (1.97")
12,5
mm
(0.4
9")
Fig. 76: Dimensions direct welded socket G1 - O-ring seal
Part Feature Characteristic
Welded socket
Size G1 B
Standard ISO 228-1
Productcode/Art.no. HYGADAPT-C.X7G
Seal Conesealmetal/metal
Thread G1 - O-ring seal
Thread G1 for pipe mounting - Cone sealing
1) EHEDG in preparation
59
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
20 m
m(0
.78"
)43
mm
(1.6
9")
G 1
ø 50 mm (1.97")
ø 53 mm (2.09")
ø 41 mm (1.61")
Fig. 77: Dimensions direct welded socket for pipe mounting G1 - Cone sealing
Part Feature Characteristic
Welded socket
Size G1 B
Standard ISO 228-1
Material 1.4435
Surface Ra≤0.76µm
Additional hygiene cer-tificate
EHEDG, 3A 2)
Productcode/Art.no. HYGADAPT-L.X7G
Seal O-ring seal
20 m
m(0
.79"
)
43 m
m(1
.69"
)
G 1
ø 50 mm(1.96")
ø 53 mm(2.09")
ø 41 mm (1.61")
Fig. 78: Dimensions direct welded socket for pipe mounting G1 - O-ring sealing
Thread G1 for pipe mounting - O-ring sealing
2) EHEDG in preparation
60
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
10.3 Clamp according to DIN 32676, ISO 2852
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Productcode/Art.no. HYGADAPT-C.XAT
25 m
m(0
.98"
)
G 1
ø 50,5 mm (1.99")
SW 46 mm (1.81")
Fig. 79: Dimensions hygienic adapter G1 (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Productcode/Art.no. HYGADAPT-C.XAR
G1 - Clamp 1½" - Cone seal
G1 - Clamp 2" - Cone seal
61
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
25 m
m(0
.98
")
G 1
ø 64 mm (2.52")
SW 46 mm (1.81")
Fig. 80: Dimensions hygienic adapter G1 (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Additional hygiene cer-tificate
EHEDG, 3A 3)
Productcode/Art.no. HYGADAPT-L.XAT25
mm
(0.9
8 ")
G 1
ø 50,5 mm (1.99")
SW 46 mm (1.81")
Fig. 81: Dimensions hygienic adapter G1 (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 40 - O-ring seal
G1 - Clamp 1½" - O-ring seal
3) EHEDG in preparation
62
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Additional hygiene cer-tificate
EHEDG, 3A 4)
Productcode/Art.no. HYGADAPT-L.XAR
25 m
m(0
.98
")
G 1
ø 64 mm (2.52")
SW 46 mm (1.81")
Fig. 82: Dimensions hygienic adapter G1 (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 40 - O-ring seal
10.4 Slotted nut acc. to DIN 11851
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN40
Productcode/Art.no. HYGADAPT-C.XEZ
G1 - Clamp 2" - O-ring seal
G1 - Slotted nut DN 40 - Cone seal
4) EHEDG in preparation
63
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
33 m
m(1
.30"
)
G 1
ø 56 mm (2.21")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 78 mm (3.07")
ø 48 mm (1.89")
Fig. 83: Dimensions hygienic adapter G1 (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN25
Productcode/Art.no. HYGADAPT-C.XNB33
mm
(1.3
0")
G 1
ø 56 mm (2.21")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 78 mm (3.07")
ø 48 mm (1.89")
Fig. 84: Dimensions hygienic adapter G1 (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 40 - Cone seal
G½1 - Slotted nut DN 50 - Cone seal
64
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN40
Additional hygiene cer-tificate
EHEDG, 3A 5)
Productcode/Art.no. HYGADAPT-L.XEZ
33 m
m(1
.30"
)
G 1
ø 55,5 mm (2.19")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 78 mm (3.07")
ø 48 mm (1.89")
Fig. 85: Dimensions hygienic adapter G1 (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 40 - O-ring seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN25
Additional hygiene cer-tificate
EHEDG, 3A 6)
Productcode/Art.no. HYGADAPT-L.XEZ
G1 - Slotted nut DN 40 - O-ring seal
G½1 - Slotted nut DN 50 - O-ring seal
5) EHEDG in preparation6) EHEDG in preparation
65
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
33 m
m(1
.30"
)
G 1
ø 68 mm (2.68")
ø 78 mm (Rd 78 x 1/6) (3.07")
ø 92 mm (3.62")
ø 50 mm (1.97")
Fig. 86: Dimensions hygienic adapter G1 (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 40 - O-ring
10.5 Slotted nut acc. to DIN 11864-1
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN40
Productcode/Art.no. HYGADAPT-C.XE2
G1 - Slotted nut DN 40 - Cone seal
66
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
36,4
mm
(1.4
3 ")
G 1
ø 78 mm (3.07")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 55 mm (2.17")
ø 48 mm (1.89")
Fig. 87: Dimensions hygienic adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11864-1) PN 16 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11864-1
Pressurestage PN25
Productcode/Art.no. HYGADAPT-C.XE3
G½1 - Slotted nut DN 50 - Cone seal
67
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Dimensions:
36,4
mm
(1.4
3 ")
G 1
ø 92 mm (3.62")
ø 78 mm (Rd 78 x 1/6) (3.07")
ø 67 mm (2.64")
ø 50 mm (1.97")
Fig. 88: Dimensions hygienic adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 25 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN40
Additional hygiene cer-tificate
EHEDG, 3A 7)
Productcode/Art.no. HYGADAPT-L.XE2
G1 - Slotted nut DN 40 - O-ring seal
7) EHEDG in preparation
68
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
36,4
mm
(1.4
3 ")
G 1
ø 78 mm (3.07")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 55 mm (2.17")
ø 48 mm (1.89")
Fig. 89: Dimensions hygienic adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11864-1) PN 40 - O-ring seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11864-1
Pressurestage PN25
Additional hygiene cer-tificate
EHEDG, 3A 8)
Productcode/Art.no. HYGADAPT-L.XE3
G½1 - Slotted nut DN 50 - O-ring seal
8) EHEDG in preparation
69
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
36,4
mm
(1.4
3 ")
G 1
ø 92 mm (3.62")
ø 78 mm (Rd 78 x 1/6) (3.07")
ø 67 mm (2.64")
ø 50 mm (1.97")
Fig. 90: Dimensions hygienic adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 25 - O-ring seal
10.6 Furtherhygienicfittings
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 32
Standard Varivent
Pressurestage PN25
Material 1.4435
Surface Ra≤0.76µm
Productcode/Art.no. HYGADAPT-C.XFS
G1 - Varivent Form F DN 25 - Cone seal
70
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 84 mm (3.31")
ø 68 mm (2.68")
ø 25,8 mm (1.02")
Fig. 91: Dimensions hygienic adapter G1 (DIN 3852-X) on Varivent Form F DN 25 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard Varivent
Pressurestage PN25
Material 1.4435
Surface Ra≤0.76µm
Productcode/Art.no. HYGADAPT-C.XFR12
,3 m
m(0
.48
")25
,5 m
m(1
.00
")G 1
ø 84 mm (3.31")
ø 68 mm (2.68")
ø 25,8 mm (1.02")
Fig. 92: Dimensions hygienic adapter G1 (DIN 3852-X) on Varivent Form N DN 40 … DN 100 - Cone seal
G1 - Varivent Form N DN 40 … DN 100 - Cone seal
71
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard Varivent
Pressurestage PN25
Material 1.4435
Surface Ra≤0.76µm
Additional hygiene cer-tificate
EHEDG, 3A 9)
Productcode/Art.no. HYGADAPT-L.XFS
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 66 mm (2.60")
ø 50 mm (1.97")
ø 29,3 mm (1.15")
Fig. 93: Dimensions hygienic adapter G1 (DIN 3852-X) on Varivent Form F DN 25 - O-ring seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard Varivent
Pressurestage PN25
Material 1.4435
Surface Ra≤0.76µm
Additional hygiene cer-tificate
EHEDG, 3A 10)
Productcode/Art.no. HYGADAPT-L.XFR
G1 - Varivent Form F DN 25 - O-ring seal
G1 - Varivent Form N DN 40 … DN 100 - O-ring seal
9) EHEDG in preparation10) EHEDG in preparation
72
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
12,3
mm
(0.4
8 ") 25
mm
0.98
")
G 1
ø 84 mm (3.31")
ø 68 mm (2.68")
ø 29,3 mm (1.15")
Fig. 94: Dimensions hygienic adapter G1 (DIN 3852-X) on Varivent Form N DN 40 … DN 100 - O-ring seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard SMS
Pressurestage PN6
Material 1.4435
Surface Ra≤0.76µm
Hygienecertificate FDA,EG1935/2004,EHEDG11)
Productcode/Art.no. HYGADAPT-C.XFA
G1 - SMS DN 38 - Cone seal
11) EHEDG in preparation
73
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
40 m
m(1
.57
")
G 1
ø 74 mm (2.91")
ø 60 mm (2.36")
ø 55 mm (2.17")
ø 48 mm (1.89")
Fig. 95: Dimensions hygienic adapter G1 (DIN 3852-X) on SMS DN 38 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard SMS
Pressurestage PN6
Material 1.4435
Surface Ra≤0.76µm
Additional hygiene cer-tificate
EHEDG, 3A 12)
Productcode/Art.no. HYGADAPT-L.XFA
G1 - SMS DN 38 - O-ring seal
12) EHEDG in preparation
74
10Hygienicadapter-VEGABAR20,30series,VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
40 m
m(1
.57
")
G 1
ø 74 mm (2.91")
ø 60 mm (2.36")
ø 55 mm (2.17")
ø 48 mm (1.89")
Fig. 96: Dimensions hygienic adapter G1 (DIN 3852-X) on SMS DN 25 - O-ring seal
75
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
11 Hygienic adapter - VEGAPOINT 10, 20 series
11.1 Technical data, sealing concept
Part Feature Characteristic
Hygienic adapter
Material 1.4435
Surface Ra≤0.76µm
Hygienecertificate FDA,EG1935/2004
Torque max. Conesealplastic/metal 50Nm(36.88lbfft)
32 1Fig. 97: Cone seal G½ VEGAPOINT plastic/metal1 Sensor2 Hygienic adapter3 Seal plastic/metal
11.2 Direct welded socket
Part Feature Characteristic
Welded socket
Size G½ B
Standard ISO 228-1
Productcode/Art.no. HYGADAPT-P.X7F
34 m
m(1
.34
")16 m
m(0
.63
")
G 1/2
ø 19,5 mm (0.78")
Fig. 98: Dimensions direct welded socket G½ - Cone seal
Common technical data
Sealing concept plastic/metal
Thread G½ - Cone seal
76
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
11.3 Clamp according to DIN 32676, ISO 2852
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Productcode/Art.no. HYGADAPT-P.XAT
34 m
m(1
.34"
)
G 1/2
ø 19,5 mm (0.77")
ø 30 mm (1.18")
ø 50,5 mm (1.99")
Fig. 99: Dimensions hygienic adapter G½ (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Productcode/Art.no. HYGADAPT-C.XAR
G½ - Clamp 1½" - Cone seal
G½ - Clamp 2" - Cone seal
77
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
34 m
m(1
.34"
)
G 1/2
ø 19,5 mm (0.77")
ø 30 mm (1.18")
ø 64 mm (2.52")
Fig. 100: Dimensions hygienic adapter G½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 40 - Cone seal
11.4 Slotted nut acc. to DIN 11851
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side DN 25
Standard DIN 11851
Pressurestage PN40
Productcode/Art.no. HYGADAPT-P.XE5
G½ - Slotted nut DN 25 - Cone seal
78
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
42 m
m(1
.65"
)
G 1/2
ø 43,4 mm (1.71")
ø 52 mm (Rd 52 x 1/6) (2.05")
ø 63 mm (2.48")
ø 30 mm (1.18")
Fig. 101: Dimensions hygienic adapter G½ (DIN 3852-X) on slotted nut DN 25 (DIN 11851) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN40
Productcode/Art.no. HYGADAPT-P.XEZ
G½ - Slotted nut DN 40 - Cone seal
79
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
42 m
m(1
.65"
)
G 1/2
ø 55,4 mm (2.18")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 78 mm (3.07")
ø 30 mm (1.18")
Fig. 102: Dimensions hygienic adapter G½ (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 40 - Cone seal
11.5 Slotted nut acc. to DIN 11864-1
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side DN 25
Standard DIN 11864-1
Pressurestage PN40
Productcode/Art.no. HYGADAPT-P.XU5
G½ - Slotted nut DN 25 - Cone seal
80
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
45,5
mm
(1.7
9 ")
G 1/2
ø 63 mm (2.48")
ø 52 mm (Rd 52 x 1/6) (2.05")
ø 42,9 mm (1.69")
ø 30 mm (1.18")
Fig. 103: Dimensions hygienic adapter G½ (DIN 3852-X) on slotted nut DN 25 (DIN 11851-1) PN 40 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side DN 25
Standard DIN 11864-1
Pressurestage PN40
Productcode/Art.no. HYGADAPT-P.XE2
G½ - Slotted nut DN 40 - Cone seal
81
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
45,5
mm
(1.7
9 ")
G 1/2
ø 78 mm (3.07")
ø 65 mm (Rd 65 x 1/6) (2.56")
ø 55 mm (2.17")
ø 30 mm (1.18")
Fig. 104: Dimensions hygienic adapter G½ (DIN 3852-X) on slotted nut DN 40 (DIN 11864-1) PN 40 - Cone seal
11.6 Furtherhygienicfittings
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard Varivent
Pressurestage PN25
Productcode/Art.no. HYGADAPT-P.XFR
G½ - Varivent Form N DN 40 … DN 100 - Cone seal
82
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
12,3
mm
(0.4
8 ")
34 m
m(1
.34
")
G 1/2
ø 66 mm (2.60")
ø 50 mm (1.97")
ø 15,3 mm (0.60")
ø 30 mm (1.18")
Fig. 105: Dimensions hygienic adapter G½ (DIN 3852-X) on Varivent Form N DN 40 … DN 100 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 32
Standard Varivent
Pressurestage PN25
Productcode/Art.no. HYGADAPT-P.XFS
G½ - Varivent Form F DN 25 - Cone seal
83
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
12,3
mm
(0.4
8 ")
34 m
m(1
.34
")
G 1/2
ø 66 mm (2.60")
ø 50 mm (1.97")
ø 15,3 mm (0.60")
ø 30 mm (1.18")
Fig. 106: Dimensions hygienic adapter G½ (DIN 3852-X) on Varivent Form F DN 25 - Cone seal
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40
Standard SMS
Pressurestage PN6
Productcode/Art.no. HYGADAPT-P.XFA
G½ - SMS DN 38 - Cone seal
84
11Hygienicadapter-VEGAPOINT10,20series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
52 m
m(2
.05
")
G 1/2
ø 74 mm (2.91")
ø 60 mm (2.36")
ø 55 mm (2.17")
ø 30 mm (1.18")
Fig. 107: Dimensions hygienic adapter G½ (DIN 3852-X) on SMS DN 38 - Cone seal
85
12Hygieneadapter-VEGAPULS10,20,30series
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
12 Hygiene adapter - VEGAPULS 10, 20, 30 series
12.1 Technical data, sealing concept
Part Feature Characteristic
Hygienic adapter
Material 1.4435
Surface Ra≤0.76µm
Hygienecertificate FDA,EG1935/2004
Torque max. 7Nm(5.163lbfft)
1
23
3
Fig. 108: Seal concept1 Sensor2 Hygienic adapter3 Seal
12.2 Clamp according to DIN 32676, ISO 2852
Part Feature Characteristic
Hygienic adapter
Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN40
Productcode/Art.no. HYGADAPT-R.XC1
Common technical data
Seal concept
G1½ - Clamp 2"
86
12Hygieneadapter-VEGAPULS10,20,30series
Welded socket, threaded and hygienic adapter •
48094-EN-200804
23,4
mm
(0.9
2")
G 1 1/2
SW 52 mm (2.05")
ø 64 mm (2.52")
Fig. 109: Dimensions of hygiene adapter G½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 40
12.3 Slotted nut acc. to DIN 11851
Part Feature Characteristic
Hygienic adapter
Size, sensor side G½
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN40
Productcode/Art.no. HYGADAPT-R.XB1
31,4
mm
(1.2
4")
G 1 1/2
ø 68 mm (2.68")
ø 78 mm (Rd 78 x 1/6)
ø 91,5 mm (3.60")
ø 55 mm (2.17")
Fig. 110: Dimensions of hygiene adapter G½ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 40
G1½ - Slotted nut DN 50
87
13 Welding, mounting
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
13 Welding, mounting
13.1 Welding instructionsInformation:The following welding instructions are for information only. It is impor-tantthattheweldingregulationsarealwaysobserved.TheADleafletsmust also be noted when welding on pressure vessels.
When welding stainless steel, utmost cleanliness is necessary. Rusty tools or screwed parts, e.g., are not allowed. Also make sure that no mild steel is processed in the vicinity.Usesufficientinertgasfortackwelding.Makesurethatyouonlytackweld, not spot-weld. For tacking and welding, use pure argon protec-tive gas.
A suitable welding dummy must be used to avoid warping the welded socket.
1
3
2
Fig. 111: Welding dummy1 Welded socket2 Dummy3 Pipeline or vessel wall
It is generally recommended to divide the weld joint into several seg-ments.
Preparations
Welding dummy
Welding procedure
88
13 Welding, mounting
Welded socket, threaded and hygienic adapter •
48094-EN-200804
8 1
5
3
72
6
4
Fig. 112: Segmental welding
After welding a segment, go to the other side and weld the segment that lies exactly opposite. Interrupt the welding process after two seg-ments and wait until the weld joint cools or carefully cool the weld joint yourself before you start welding again.
The pressure bearing capacity of the welded socket depends on the quality of the weld as well as the material of the welded socket. In the case of threaded sockets, the total thread length must be utilized for pressure loading.
13.2 Mounting instructions threaded and hygienic adapter
Use suitable spanners to screw the sensor into the adapter. The specificationsarestatedintheappropriatechaptersofthismanualorin the operating instructions manual of the respective sensor.
Placetheparts,especiallywithhygieneadapters,onasuitable,cleansurface(e.g.workbench)andscrewthemtogetherwiththerespectivespecifiedtorque.
Note:Avoiddamagetothesurfaceoftheprocessfittingandadapter.Anydamage can particularly impair the hygienic properties.
Note:Theconesealsmetal/metalorplastic/metalprovideasecuresealingwhen tightened once.Looseningandretighteningreducesthequalityofthecontactsur-faces.Leakage,productleakageandcontaminationcanbetheresult.
Pressure bearing capac-ity
Preparations
Mounting
89
Notes
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
90
Notes
Welded socket, threaded and hygienic adapter •
48094-EN-200804
91
Notes
Welded socket, threaded and hygienic adapter •
4809
4-EN
-200
804
Printing date:
VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermany
4809
4-EN
-200
804
All statements concerning scope of delivery, application, practical use and operat-ing conditions of the sensors and processing systems correspond to the information available at the time of printing.Subject to change without prior notice
© VEGA Grieshaber KG, Schiltach/Germany 2020
Phone +49 7836 50-0Fax +49 7836 50-201E-mail: [email protected]