Upload
hoangdieu
View
215
Download
0
Embed Size (px)
Citation preview
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 02/20/18Eastern Metal SupplyQuality Shapes In Aluminum
Sunshade System / Air Foil2-1/8” Air Foil x 16’ 56-63-200
6” Air Foil x 24’56-63-600 Wall: .085/.100
52-63-1020 (MO) Wall: .085
2” Hollow Blade x 16’80-MF-013 Mill Finish
uses #14 screw
2” Hollow Blade x 16’41-63-830 Mill Finish
2” Solid Blade x 20’52-63-4696 Mill Finish
52-63-3060 White
2” Blade x 16’41-63-835 Mill Finish
4” Air Foil x 24’56-63-400 Wall: .080
12” Air FoilMILL ORDER
52-63-11852Wall: .188
Architectural 01
7” Air Foil MILL ORDER 52-63-12534
8” Air Foil x 24’ (2 screw bosses)56-63-800 Wall: .110
Scan QR
Code to view
Architectural
section online:
ENGINEERING AVAILABLE UPON REQUESTFlorida items are available to all branches via shuttle.
8” Air Foil x 24’ (4 screw bosses)MILL ORDER 053244 (TX) Wall: .100
10” Air Foil MILL ORDER 56-63-1000 Wall: .125
Sunshade System / Air Foil
4” Self-Mating ChannelMILL ORDER 52-63-420 (TX) Wall: .080
Measures out to 2” x 4” when mated
6” Self-Mating ChannelMILL ORDER 52-63-622 (TX) Wall: .080
Measures out to 2” x 6” when mated
8” Self-Mating ChannelMILL ORDER 52-63-11390 Wall: .080
Measures out to 2” x 8” when mated
Pre-Fabricated framing items are also available. Ask your sales representative for more information.
5" Radius Tube x 24'40-63-723 6063 T6 M/F(for louvers)
4" Radius Tube x 24'40-63-724 6063 T6 M/F(for louvers)
3" Radius Tube x 24'40-63-722 6063 T6 M/F
(for louvers)
5" Shadow Box x 24'56-63-905 6063 T6 M/F
Wall: .080
4” Half Round
Bull Nose x 24’56-63-202
Wall: .083
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/08/16
Architectural 02
6” Half Round
Bull Nose x 24’56-63-205
Wall: .100
ENGINEERING AVAILABLE UPON REQUESTFlorida items are available to all branches via shuttle.
3” Full Round
Bull Nose x 24’56-63-201 Wall: .083
2” Full Round Bull Nose
MILL ORDER 0522954” Full Round
Bull Nose x 24’56-63-204 Wall: .093
Sloped Sunshade
Bullnose x 24’MILL ORDER 52-61-4733Wall: .125
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 06/08/18Eastern Metal SupplyQuality Shapes In Aluminum
Rect. Tube
Frames
(Mitered for
welding)
Bottom: Mitered side frames with bladesthrough center mullion; Top: Pre-Fabricated
Flat Bar Outriggers and Mullions
Pre-punched
rectangular
tubes for side
frames and
center mullion
Air Foil
Louver
Blades
Pre-Fabricated Sunshade System - Ready-to-Weld Available mitered or square cut with pre-punched holes.
Rectangular Tube or Bar Frames and Air Foil Blades from 2” to 12”Fast Assembly • Increased Strength • Minimal Welding for a Clean Look • Fewer Parts, Less Inventory
Air Foil
Louver
Blades
Half Round Bull Nose(Mechanically attached at sides
and tack welded at mullion)
1
1
Half Round
Bull Nose Option
Rectangular Bar Outiggers (Tapered and Pre-drilled to accomodate
screw bosses in air foil blades)
Rectangular Bar
Center Mullion(Pre-Punched and
Tapered)
Rectangular Tube Frame
Mechanical System
Air Foil Louver
Blades
Half Round or
Full Round Bull
Nose
Counter
Sunk Holes
Full Round Bull
Nose Option
Pre-Fabricated Sunshade SystemReady-to-Weld or Mechanically Join
Available mitered or square cut with pre-punched holesRectangular Tube or Rectangular Bar Frames & Air FoilBlades from 2” to 12”
1
Architectural 03
ENGINEERINGAVAILABLE
UPON REQUEST
Pre-punched
rectangular
tubes for side
frames and
center mullion
Rect. Tube
Frames
(Mitered for
welding)
Air Foil
Louver
Blades
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/08/16
Louver Shapes
Mechanical Snap Fit Louver Frame
Cover (top) MILL ORDER 52-63-13631
Frame (bottom) MILL ORDER 52-63-13629
Cover mates with Frame (see below)*Similar system shown on Architectural 03
Architectural 04
Florida items are available to all branches via shuttle.
Typical Riveted Louver
Assembly Cut Away
L2 Louver Blades with
L5 Channel
2 x 12 x .156 Rectangular Tube
2178-008 (MO) (with 4 screw receivers)
Channels
2 x 0.75 x 23’ 10” (L5) Wall: .125/.093
13-63-262 mates with L-2 and L-6
2 x 1 x .125 Wall: .125
13-63-265 x 20’ mates with L-213-63-274 (FL) x 24’ mates with L-2
4 x 1 x 20’ (L4) Wall: .105/.080
13-63-273 mates with L-7 and L-1(with radius)
L-6 - Louver Blade x 24’
51-63-006
wall: .062 mates with L-5
2” x .375” Louver Blade x 16’
80-MF-013
wall: .045 mates with L-5
L-2 - Louver Blade x 20’
51-63-067
wt/ft: 0.405
mates with L-5; 13-63-265and 13-63-274 (FL)
L-1 - Louver Blade x 24’
52-63-1913
51-63-062 x 20’
wt/ft: 0.860
mates with L-4
L-7 - Louver Blade x 24’
31-63-100
wt/ft: 0.826
mates with L-4
L6 - Typical Assembly Schematic
L6 Louver Blades with
L5 Channels
L7 - Typical Assembly Schematic
L7 Louver Blades with
L4 Channels
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/31/16
Architectural 05
Trellis & Pergolas Florida items are available to all branches via shuttle.
Commonly used Aluminum Tube for Trellis & Pergolas
Typical Scalloped
End Trellis/Pergola
tube fabrication
services available
through EMS
Square Aluminum Tube6063-T52 x 24’ (Unless noted otherwise)
Approx.
Stock Code Size in Inches (E x M x S) Wt/Lin ft.
19-63-140 1 x .125 0.524
19-63-170 1.500 x .125 0.824
19-63-210 2 x .125 1.126
19-63-235 3 x .125 1.726
19-63-245 4 x .125 2.324
19-63-255 5 x .125 2.925
19-61-258 5 x .250 (6061-T6) 5.700
19-63-260 6 x .125 3.525
19-61-260 6 x .250 6.900
19-63-265 8 x .188 7.050
19-63-300 10 x .250 x 24' (6063-T6 w/rad) 11.700
Please see Standards p15 for a full listing of our Square Tube
Rectangular Aluminum Tube6063-T52 x 24’ (Unless noted otherwise)
Approx.
Stock Code Size in Inches (E x M x S) Wt/Lin ft.
20-63-280 2 x 4 x .125 1.724
20-63-285 2 x 5 x .125 2.025
20-63-290 2 x 6 x .125 2.327
20-63-295 2 x 8 x .125 2.925
20-63-400 2 x 10 x .125 (6063-T6) 3.541
20-63-500 2 x 12 x .188 6.210
20-63-303 3 x 6 x .125 (6063-T6) 2.625
20-63-302 3 x 8 x .110 (6063-T6) 2.862
20-63-700 3 x 10 x .125 (6063-T6) 3.824
20-63-305 3 x 12 x .188 (6005 T5) 6.613
20-63-803 4 x 6 x .125 2.925
20-61-524 (NC/DE) 4 x 8 x .250 (6061-T6) 6.900
20-61-500 4 x 10 x .250 (w/.25 radius; 6061-T6) 8.036
20-61-505 4 x 12 x .250 x 26’ (6005-T6) 9.300
56-63-019 6 x 8 x .188 (w/rad) 6063-T6 x 25’ 6.196
56-63-027 6 x 10 x .19 (w/rad) 6063-T6 x 25’ 7.171
20-63-800 6 x 12 x .250 (w/.125 radius) 10.500
Please see Standards p16 for a full listing of ourRectangular Tube
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 04/28/17
Front Gutter
FasciaSide Gutter Fascia
Side
Gutter
Fascia
Self Mating
Pans
Self Mating Pans
Hanger Arm:
Square Tube, Round
Tube or Pipe
Tie Back Clip
Square Tube
support brace
Hanger Arm:
Square Tube, Round
Tube or Pipe
Tie Back Clip
Channel for
support brace
Architectural Canopy:Perspective Assembly
Architectural Canopy:Front View Assembly
Multiple drainage options
available via Gutter Fascia
Front Gutter Fascia removed to display interior components of canopy
Top Lip of Back
Gutter Fascia
Back Gutter
Fascia
Front Fascia height can be increased byattaching 2 x 4 angle to the top fascia lip.
Channel for
support brace
Tie Back Clip
Attaches to Support Brace
and Top Fascia Lip
Tie Back Clip
Architectural Canopy SchematicAvailable in: Mill Finish & Anodized; Various Lengths & AlloysENGINEERING AVAILABLE UPON REQUEST
Architectural 06
Gutter
Extender
Option
Industrial
Channel Fascia
Option
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/08/18
Architectural Canopy ENGINEERING AVAILABLE UPON REQUEST • Florida items are available to all branches via shuttle.*Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis.
3 x 12 Carport Roll Form Roof Pan (5 Rib)
Self Mating Available in .032 and .024 thicknesses Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire with your sales person)
Production Lead Times average 5-7 Business Days + shipping
3 x 12 x .050 Carport Roll Form Roof Pan (2 Rib)Self Mating Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire with your sales person)
Production Lead Times average 5-7 Business Days + shipping
3 x 6 x .078 Self Mating Canopy
Roof Pan (V-Deck)6063-T6 Mill Finish (3” On Center V)
MILL ORDER 52-63-11677 (FL/NC)0.078 - Heavy Wall
3 x 6 Self Mating Canopy Roof Pan x 24’6063-T6 Mill Finish
56-63-015 (0.065 - Light Wall)
MILL ORDER 20160-020 (TX)0.078 - Heavy Wall
3 x .045 Extruded Header
200-WH-019 White x 24’
200-MB-019 Bronze x 24’
200-WH-020 White x 30’
200-MB-020 Bronze x 30’
Fascia Splice x 20’
21929-253 (TX) Mill Finish
Fits 3 x 8 Gutter Fascia21929-667 and 21929-025M
Saddle Bracket
6063-T6 Mill Finish
SB-CLIPReceives 2” Square Tube
12” Industrial Channel
Fascia x 24’52-63-14284 Mill FinishMates with
4 x 6, 4 x 8,
4 x 10, 4 x 12
Gutter Fascias
See schematic on Arch p 06
Tie Back Clips
6063-T6 Mill Finish
2” x 12’ 40-63-262Receives 2” Square Tube; Also used as support brace bracket
Female Pins 6061-T6511 MF
SPECIAL ORDER
13335-1 Fits 1-1/2” x 1/8” Tube
13335-2 Fits 2” x 1/8” Tube
132 pcs Minimum Order; Comeswith bolt;
3 x 8 x .125 Gutter
Fascia x 24’
21929-025M (TX) Mill Finish
21929-667 (TX) 204-R1 Clear
Anodized
4 x 8 x 3 x .125 Gutter
Fascia x 24’
56-63-039 Mill Finish
4 x 10 x 4 x .125 Gutter
Fascia x 24’
56-63-043
56-63-045 x 30’ Mill Finish
4 x 6 x .093 Gutter
Fascia x 24’
56-63-033 Mill Finish
56-63-036 204-R1 Clear
Anodized
56-MB-036 Bronze
56-WH-036 White
4 x 8 x .125 Gutter
Fascia x 24’
56-63-016 Mill Finish
4 x 12 x 5 x .160
Gutter Fascia x 24’
56-63-042 Mill Finish
Gutter/Fascia
Extender x 24’
2” x 4.5” x .093 x 24’
56-63-041 Mill FinishSee schematic onArchitectural p 06
Architectural 07
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/30/16
Walkway Schematic - Now Stocking!Standard Walkway Shapes - 204 R1 AnodizedENGINEERING AVAILABLE UPON REQUEST
Walkway System:Perspective Assembly
Architectural 08
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/23/18
Walkway Systems3 x 6 x .078 Self Mating Canopy Roof Pan (V-Deck)6063-T6 Mill Finish (3” On Center V)
MILL ORDER 52-63-11677 0.078 - Heavy Wall
3 x 6 Self Mating Canopy Roof Pan x 24’6063-T6 Mill Finish
56-63-015 (0.065 - Light Wall)
MILL ORDER 20160-020 (TX) 0.078 - Heavy Wall
Bottom Clear Anodized
Mates with 2-3/4 Top & 4-1/2 Top21929-004 (TX) x 20’
21929-006 (TX) x 24’
WWC-19 “P” Cap (Flat) x 24’ 2”
Wall: .060 Mates with WWC-176063-T6 - 204 R1 Anodized
56-63-008
WWC-17 “P” Roof Pan x 24’ 2”
Wall: .060 Mates with WWC-196063-T6 - 204 R1 Anodized
56-63-001
1/2 Bottom Clear Anodized
Mates with 2-3/4 Top & 4-1/2 Top21929-001 (TX) x 20’
3 x 12 Carport Roll Form Roof Pan (5 Rib)
Self Mating Available in .032 and .024 thicknesses Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire with your sales person)
Production Lead Times average 5-7 Business Days + shipping
3 x 12 x .050 Carport Roll Form Roof Pan (2 Rib)Self Mating Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire with your sales person)
Production Lead Times average 5-7 Business Days + shipping
2” Pan End Cap x 12’ 1”Wall: .085 6063-T6
10-63-100 Mill Finish
T-Flashing x 24’56-63-040
2-3/4 Top Clear Anodized
Mates with 1/2 Bottom & Bottom21929-008 (TX) x 20’
21929-010 (TX) x 24’
4-1/2 Top Clear Anodized
Mates with 1/2 Bottom & Bottom21929-023 (TX) x 20’
21929-012 (TX) x 24’
ENGINEERING AVAILABLE UPON REQUEST • Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis.
Architectural 09
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 09/21/17
Walkway Systems
Fascia Splice x 20’21929-253 (TX) Mill Finish
Fits 3 x 8 Gutter Fascia21929-667 and 21929-025M
4 x 4 x .150 Gutter Beam x 20’6063-T6 Mill Finish
MILL ORDER 21929-713 (TX)
4 x 6 x .190/.125 Gutter Beam x 24’ 2”6063-T6 - 204 R1 Anodized
56-63-011
4 x 8 x .190/.150 Gutter Beam x 24’ 2”6063-T6 - 204 R1 Anodized
56-63-013
6 x 6 x .130/.190 Gutter Beam6005-T5 Mill Finish
21929-441 (TX) x 20’
21929-452 (TX) x 24’
21929-431 (TX) x 30’
6 x 6 x .150 Gutter Beam x 24’ 6”6063-T6 - 204 R1 Anodized
56-63-038
ENGINEERING AVAILABLE UPON REQUEST • Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis.
4 x 12 x 5 x .160
Gutter Fascia x 24’56-63-042
Mill Finish
6.1 x .070 Fascia x 24’6063-T6
204 R1 Anodized
56-63-005
6.404 x 1 x .070 Side
Fascia x 24’6063-T6
204 R1 Anodized
(F-2 - w/hook)
56-63-007
Architectural 10
3 x 8 x .125 Gutter Fascia x 24’
21929-025M (TX) Mill Finish
21929-667 (TX) 204-R1 Clear Anod
4 x 8 x 3 x .125 Gutter
Fascia x 24’
56-63-039
Mill Finish
4 x 10 x 4 x .125 Gutter
Fascia x 24’
56-63-043
56-63-045 x 30’
Mill Finish
4 x 6 x .093 Gutter Fascia x 24’
56-63-033 Mill Finish
56-63-036 204-R1 Clear Anod
56-MB-036 Bronze
56-WH-036 White
4 x 8 x .125 Gutter Fascia x 24’
56-63-016 Mill Finish
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 03/23/17
Walkway Systems6 x 10 x .190 Gutter Beam
GB-13 6063-T6 - 204 R1 Anodized
6063-T6 - 204 R1 Anodized
56-63-029 x 25’
56-63-030 x 30’
6063-T6 - Mill Finish
56-63-031 x 25’
56-63-032 x 30’
6 x 8 x .190 Gutter Beam GB-12-A 6063-T6 - 204 R1
Anodized
56-63-021 x 25’
56-63-022 x 30’
6063-T6 - Mill Finish
56-63-023 x 25’
56-63-024 x 30’
4 x .080 Gutter Beam
End Cap x 97”
6063-T6 - 204 R1 Anodized
52-63-11157
6 x .080 Gutter Beam
End Cap x 97”
6063-T6 - 204 R1 Anodized
52-63-11158
4 x .125 Square Tube x 24’ 6”
(.125 radius) 6063-T6 - 204 R1 Anod.
56-63-003 (FL) x .125
4 x .150 Square Tube x 22’(.125 radius) 6063-T6 - 204 R1 Anod.
56-63-010 (FL)
4 x .156 Square Tube Boss
Column
6005T6 Clear Anodized
MILL ORDER 61-63-400 (TX)
4.5 x .093 Square Tube
(.125 radius) 6063-T656-MB-034 (FL) Bronze x 20’
56-MF-035 (FL) Mill Finish x 24’
56-WH-035 (FL) White x 24’
56-MB-035 (FL) Bronze x 24’
6 x 10 x .190 Rect.
Tube x 25’ With Radius
6063-T6 - 204 R1 Anodized
56-63-025
56-63-026 x 30’
6063-T6 Mill Finish
56-63-027
56-63-028 x 30’
6 x 14 x .250 Rect. Tube
With Radius
MILL ORDER
43272 (TX)
10 x .250 Square
Tube x 24’ With Radius
19-63-300
6063-T6 Mill Finish
4 x 6 x .150 Rect. Tube x 24’ 2”
(.125 radius)
6063-T6 204 R1 Anodized
56-63-004 (FL)
ENGINEERING AVAILABLE UPON REQUEST • Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis.
1.75 x 11.75 x .125
Rectangular Tube
with Center Web
MILL ORDER
1004-018 (TX)
6 x 12 Drain Beam MILL ORDER #EMSWLB640
3 x .045 Extruded Header200-WH-019 White x 24’
200-MB-019 Bronze x 24’
200-WH-020 White x 30’
200-MB-020 Bronze x 30’
4 x .125 Sq Tube x 24’ 2”(.125 radius) 6063-T6
204 R1 Anodized
56-63-003 x .125
4 x .150 Square Tube x 22’(.125 radius) 6063-T6
204 R1 Anodized
56-63-010
1 x 4 x .125 Rect Tube x 24’20-ANOD-235
202 R1 Anodized
4.5 x .093 Square Tube
(.125 radius) 6063-T656-MB-034 Bronze x 20’
56-MF-035 Mill Finish x 24’
56-WH-035 White x 24’
56-MB-035 Bronze x 24’
4 x .156 Square Tube Boss
Column6005T6 Clear Anodized
MILL ORDER 61-63-400 (TX)
2 x 6 x .125 Rect Tube x 24’(202-R1 Anodized)
52-63-13710
2 x 6 x .250 Rect Tube x 24’(202-R1 Anodized)
52-63-13711
6 x .150 Square Tube
6063-T6 - 204 R1 Anodized
56-63-037 x 24'6" (w/.093
Radius)
6 x .180 Square TubeMILL ORDER 19-63-302 (TX)
4 x 6 x .150 Rect. Tube x 24’ 2”
(.125 radius)
6063-T6 204 R1 Anodized
56-63-004
4 x 8 x .190/.150 Rect.
Tube x 24’ 2”
6063-T6 204 R1 Anodized
56-63-014
6 x .180 Square Tube Boss
Column6005T6 Clear AnodizedMILL ORDER 61-63-600 (TX)
6 x 8 x .188 Rect. Tube x 25’
With Radius
6063-T6 - 204 R1 Anodized
56-63-017
56-63-018 x 30’
6063-T6 Mill Finish
56-63-019
56-63-020 x 30’
Architectural 11
6 x 12 x .250 Rect.
Tube x 24’ With Radius
20-63-800
6063-T6 Mill Finish
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 06/05/17Eastern Metal SupplyQuality Shapes In Aluminum
Architectural 12
Engineered Carport Kit Schematic: Freestanding & AttachedDesign is based on: IBC 2009, ASCE 7-10 (FL), ASCE 7-05 (listed states*), FBC & NCBC - Latest Editions
Grade-Level
drain holes to
be field drilled
where needed.
4-1/2” Post
(2) 1-1/2” Holes
Each Side w/#5
Rebar, Grade 40
Steel
Engineering available upon request.
See Architectural p04
for Self-Mating Pans:
Low Wind (shown in diagram):
3 x 12 x .050 Roll Formed Pans
FreestandingCarport
AttachedCarport
U-Header
Post Max Spacing:
Centerline to Centerline:
10’ 3-3/4”
Max Height:
10’ - bottom of Gutter
Fascia to top of slab.
*Sealed Engineering Drawingsfor: FL, GA, SC, NC, AL, LA, TXFL Wind Velocity:Low Wind: Vult = 125 mph High Wind: Vult = 175 mph Snow Load: 20 psf Custom Sizes Available uponRequestCan also be used in Canopyor Walkway applicationsRoll Form Pan available inWhite & BronzeExtruded Post & GutterAvailable in Bronze & WhiteInstall Kits Available: includesrebar, threaded rod, nuts, bolts,screws, and concrete adhesive
EMS will providepre-fabricated Posts
including notching, 7 topside holes (see engineering
for details)
3/8” Base
Plate: shop
welded to
column
base
Holes for
1/2” Anchors
4-1/2” Post
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/23/18
Engineered Carport Kit
Architectural 13
3 x 6 x .078 Self Mating Canopy
Roof Pan (V-Deck - 3” on center)
MILL ORDER 52-63-116776063-T6 Mill Finish
Meets High Wind: 175 mph Exposure CSnow Load: 20 psf
3 x 6 x .078 Self Mating Canopy
Roof Pan x 24’
6063-T6 Mill Finish
MILL ORDER 20160-020 (TX)Meets High Wind: 175 mph Exposure CSnow Load: 20 psf
3 x 6 x .065 Self Mating Canopy
Roof Pan x 24’
6063-T6 Mill Finish
56-63-015
Meets Wind: 125 mph Exposure BSnow Load: 20 psf
3 x 12 x .050 Carport Roll Form Roof
Pan (2 Rib) Self Mating
Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire
with your sales person) Production Lead
Times average 5-7 Business Days + shipping
1 x 3 x 1.6 x .040 Roll Form
Breakform End CapCustom Lengths Available in White & Bronze
Extruded Patio Roof
U-Header x 24’
47153 White
Wall: .045
4 x 6 x .093 Gutter Fascia x 24’ (6005-T5)
56-63-033 Mill Finish
56-63-036 204-R1 Clear Anodized
56-MB-036 Bronze
56-WH-036 White
4 x 6 x .190/.125 Gutter Beam x 24’ 2”6063-T6 - 204 R1 Anodized
56-63-011
4.5 x .093 Square Tube x 24’
(.125 radius) 6063-T656-MB-034 Bronze x 20’
56-MF-035 Mill Finish
56-WH-035 White
56-MB-035 Bronze
4 x 6 x .150 Rect. Tube x 24’ 2”
(.125 radius)
6063-T6 204 R1 Anodized
56-63-004
ENGINEERING AVAILABLE UPON REQUEST • Florida items are available to all branchesvia shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis.
Screen Room Enclosure Shapes
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Eastern Metal SupplyQuality Shapes In Aluminum
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 04/18/18
2 x 2 Universal Snap x 24’200-WH-080 White
200-MB-080 Bronze
3 x 3 Eve Rail
200-WH-082 White x 24’
200-MB-082 Bronze x 24’
200-WH-083 White x 30’
200-MB-083 Bronze x 30’
1 x 2 Self-Mating Snap42-WH-005 (MO) White x 24’
200-WH-005 White x 25’
200-MB-005 Bronze x 25’
2 x 3 x .045 Patio
200-WH-009
White x 24’
200-MB-009
Bronze x 24’
200-WH-010
White x 30’
200-MB-010
Bronze x 30’
3 x 2 x .045 Patio
200-WH-011 White x 24’
200-MB-011 Bronze x 24’
200-WH-012 White x 30’
200-MB-012 Bronze x 30’
2 x 4 x .050 Patio
200-WH-013
White x 24’
200-MB-013
Bronze x 24’
200-WH-014
White x 30’
200-MB-014
Bronze x 30’
2 x 5 x .050 Patio
200-WH-015
White x 24’
200-MB-015
Bronze x 24’
200-WH-016
White x 30’
200-MB-016
Bronze x 30’
Florida items are available to all branches via shuttle.
Architectural 14
6 pc Sub-Bundles 4 pc Sub-Bundles
6 pc Sub-Bundles
4 pc Sub-Bundles 4 pc Sub-Bundles 4 pc Sub-Bundles
2 pc Sub-Bundles
1 x 3 Self-Mating Snap x 25’
200-WH-006 White
200-MB-006 Bronze
4 pc Sub-Bundles
1 x 4 Self-Mating Snap
200-WH-007 (FL)White x 24’
200-MB-007 (FL) Bronze x 24’
200-WH-008 (FL)White x 30’
200-MB-008 (FL) Bronze x 30’
4 pc Sub-Bundles
1/2 x 2 Archway x 24’
x .040 min. (Patio)
200-WH-029 White
200-MB-029 Bronze
2 x 2 Hollow x .040 min. (Patio)200-WH-003 White x 24’
42-WH-001 (MO) White x 24’
200-MB-003 Bronze x 24’
42-MB-001 (MO) MO Bronze x 24’
200-WH-004 White x 30’
200-MB-004 Bronze x 30’
10 pc Sub-Bundles 6 pc Sub-Bundles10 pc
Sub-Bundles
1 x 3 Open Back x .040 min. (Patio)
200-WH-070 White x 24’
200-MB-070 Bronze x 24’
200-WH-071 White x 30’
200-MB-071 Bronze x 30’
1 x 2 Open Back x .040 min. (Patio)
200-WH-001 White x 24’
42-WH-002 (MO) White x 24’
200-MB-001 Bronze x 24’
42-MB-002 (MO) MO Bronze x 24’
200-WH-002 White x 30’
200-MB-002 White x 30’
10 pc Sub-Bundles
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/23/18Eastern Metal SupplyQuality Shapes In Aluminum
3” Scallop Tube
42-WH-003 (MO) White x 20’
200-WH-017 White x 24’
200-MB-017 Bronze x 24’
200-WH-018 White x 30’
200-MB-018 Bronze x 30’
3 x .045 Extruded Header
200-WH-019 White x 24’
200-MB-019 Bronze x 24’
200-WH-020 White x 30’
200-MB-020 Bronze x 30’
2 pc Sub-Bundles
4 pc Sub-Bundles
Screen Room Enclosure Shapes
5-1/2” Extruded Fascia x 27’
200-WH-022 White
200-MB-022 Bronze
Extruded T-Gutter x 24’
200-WH-021 White
200-MB-021 Bronze
3” x 12” Roll Form Roof Pan (5 Rib)Self Mating
SPECIAL ORDER: Wall: .024
SPECIAL ORDER: Wall: .032
SPECIAL ORDER: Wall: .050 (2 Ribs)
Custom Lengths Available in White & BronzeCRATE CHARGE MAY APPLY (please inquire with
your sales person) Production Lead Times aver-
age 5-7 Business Days + shipping
Florida items are available to all branches via shuttle.
2 pc Sub-Bundles
Architectural 15
E-Gutter
200-WH-066 White x 24’
200-MB-066 Bronze x 24’
200-WH-067 White x 30’
200-MB-067 Bronze x 30’
E-Fascia x 27’
200-WH-068 White
200-MB-068 Bronze
3” Insulated Interlocking Roof Panels Available in 2’ & 4’ widths; a variety of lengths &colors, With or without Fan Beams. Contact yoursales rep for more info. Products stocked in FL.3" Panel WITHOUT Fan Beam (.024):
200-2WH-108 2' x 9'
200-WH-108 4' x 9'
200-2WH-120 2' x 10'
200-WH-120 4' x 10'
200-2WH-132 2' x 11'
200-WH-132 4' x 11'
SPECIAL ORDER 2' x 12' 200-2WH-144200-WH-144 4' x 12'
200-2WH-156 2' x 13'
200-WH-156 4' x 13'
200-2WH-180 2' x 15'
200-WH-180 4' x 15'
3" Panel WITH Fan Beam on Center (.024):
200-WH-108FB 4' x 9'
200-WH-120FB 4' x 10'
200-WH-132FB 4' x 11'
200-WH-144FB 4' x 12'
200-WH-156FB 4' x 13'
200-WH-180FB 4' x 15'
Adjustable Z-Bar x 17’
200-WH-024 White
200-MB-024 Bronze
10 pc Sub-Bundles
1-1/2” x 2-1/8” Receiving
Channel x 24’
200-WH-065 White
200-MB-065 Bronze
1-1/2” x 3-1/8” Receiving
Channel x 24’
200-WH-064 White
200-MB-064 Bronze
2 x 2 Door Jamb x 24’
200-WH-023 White
200-MB-023 Bronze
6 pc Sub-Bundles
2 x 3 Door Jamb x 24’
200-WH-072 White
200-MB-072 Bronze
6 pc Sub-Bundles
Screen Room Enclosure Accessories
14/10 Charcoal Pool & Patio
Enclosure Screen x 100’ Rolls
(Pet Screen) NYW-PR36 36”
NYW-PR48 48”
.290 Flat Spline x 1000’
(For Pet Screen)200-CC-035
Rain Carrying Accessories
3” x 4” Downpipe200-DS-001 White x 8'
200-DS-002 Bronze x 8'
200-DS-003 White x 10'
200-DS-004 Bronze x 10'
Paint, Caulk, Etc.47137 Touch Up Paint White
47138 Touch Up Paint Bronze
Fasteners - 5000pc min/boxStocked only in EMS MO
#10 Hex Washer Head Sheet MetalScrew; #8 (1/4" head)
Also available in BronzeProduct Code Description
0-10N150-0 (MO) 1-1/2" Xylan Zinc
0-10N200-0 (MO) 2" White Xylan
0-10N300-0 (MO) 3" White Xylan
Special Order:0-10N75-0 3/4" White Xylan
0-10N100-0 1" White Xylan
0-10N150-1 1-1/2" White Xylan
0-10N400-0 4" White Xylan
200-CC-028 84"
200-CC-034 90"
200-CC-029 96"
200-CC-023 102"
200-CC-030 108"
.024 x 16” Kick Plate Coil Rolls200-KPWH-025 White x 25’
200-KPMB-025 Bronze x 25’
200-KPWH-050 White x 50’
200-KPMB-050 Bronze x 50’
.024 x 24” Kick Plate Coil Rolls200-KPWH-2425 White x 25’
200-KPMB-2425 Bronze x 25’
200-KPWH-2450 White x 50’
200-KPMB-2450 Bronze x 50’
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 10/23/17Eastern Metal SupplyQuality Shapes In Aluminum
Architectural 16
Rain Carrying Accessories3” x 4” Elbow
"A" Elbow
200-AE-001 White
200-AE-002 Bronze
"B" Elbow
200-BE-001 White
200-BE-002 Bronze
3" x 4" Drop Outlet
200-DO-001 Mill Finish
Hinges200-WH-035 White (shown)
200-MB-035 Bronze
Adapter for Closer200-WH-036 White
200-MB-036 Bronze
Door Blank
with 8” Kick
Plate200-WH-032
White
200-MB-032
Bronze
Actual
Door Size:
35-5/8” x 79-1/2”
Daylight Opening
Size:
36” x 80”
Door Hardware Kit200-WH-033
White (shown)
200-MB-033
Bronze
Bugsweep200-WH-034 White (shown)
200-MB-034 Bronze
- (FL) items are available to all branches via shuttle.
18/14 Charcoal Pool & Patio
Enclosure Screen x 100’ Rolls200-CC-025 36"
200-CC-024 60"
200-CC-026 72"
200-CC-027 78"
Flat Spline x 1000’200-CC-031
20/20 Charcoal Pool & Patio
Enclosure Screen x 100’ Rolls
(No See Um)NYW-202036 36”
NYW-202072 72”
NYW-202084 84”
NYW-202096 96”
NYW-2020108 108”
Screen Enclosure Shapes Florida items are available to all branches via shuttle.
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 10/20/17Eastern Metal SupplyQuality Shapes In Aluminum
5” Super Gutter200-WH-062 White x 24’
200-MB-062 Bronze x 24’
200-WH-063 White x 30’
200-MB-063 Bronze x 30’
200-WH-078 White x 40'
200-MB-078 Bronze x 40'
5” Super Gutter
Brace x 12’200-MF-004 Mill Finish
2” x 4” Self Mating Beam
200-WH-040 White x 18’
200-MB-040 Bronze x 18’
200-WH-041 White x 20’
200-MB-041 Bronze x 20’
200-WH-077 White x 24’
200-MB-077 Bronze x 24’
200-WH-042 White x 30’
200-MB-042 Bronze x 30’
2” x 8” Self Mating Beam200-WH-056 White x 18’
200-MB-056 Bronze x 18’
200-WH-057 White x 20’
200-MB-057 Bronze x 20’
200-WH-069 White x 22’
200-MB-069 Bronze x 22’
200-WH-058 White x 24’
200-MB-058 Bronze x 24’
200-WH-059 White x 28’
200-MB-059 Bronze x 28’
200-WH-060 White x 30’
200-MB-060 Bronze x 30’
200-WH-061 White x 32’
200-MB-061 Bronze x 32’
2” x 6” Self Mating Beam200-WH-047 White x 18’
200-MB-047 Bronze x 18’
200-WH-048 White x 20’
200-MB-048 Bronze x 20’
200-WH-049 White x 22’
200-MB-049 Bronze x 22’
200-WH-050 White x 24’
200-MB-050 Bronze x 24’
200-WH-051 White x 26’
200-MB-051 Bronze x 26’
2” x 7” Self Mating Beam200-WH-052 White x 18’
200-MB-052 Bronze x 18’
200-WH-053 White x 20’
200-MB-053 Bronze x 20’
200-WH-054 White x 22’
200-MB-054 Bronze x 22’
200-WH-055 White x 26’
200-MB-055 Bronze x 26’
200-WH-109 White x 30’
200-MB-109 Bronze x 30’
2” x 9” Self Mating Beam200-WH-090 White x 22’
200-MB-090 Bronze x 22’
200-WH-091 White x 24’
200-MB-091 Bronze x 24’
200-WH-092 White x 28’
200-MB-092 Bronze x 28’
200-WH-093 White x 30’
200-MB-093 Bronze x 30’
200-WH-094 White x 32’
200-MB-094 Bronze x 32’
2” x 10” Self Mating Beam200-WH-095 White x 24’
200-MB-095 Bronze x 24’
200-WH-096 White x 28’
200-MB-096 Bronze x 28’
200-WH-097 White x 30’
200-MB-097 Bronze x 30’
200-WH-098 White x 32’
200-MB-098 Bronze x 32’
200-WH-099 White x 36’
200-MB-099 Bronze x 36’
3” x 9” Unilock Slot Beam x 30’52-WH-2930N White
52-MB-2930N Bronze
Hurricane Rated; Can be used for "picture view" screen applications.
7” Super Gutter200-WH-025 White x 24’
200-MB-025 Bronze x 24’
200-WH-026 White x 30’
200-MB-026 Bronze x 30’
200-WH-111 White x 40'
200-MB-111 Bronze x 40'
2” x 5” Self Mating Beam
200-WH-043 White x 18’
200-MB-043 Bronze x 18’
200-WH-044 White x 20’
200-MB-044 Bronze x 20’
200-WH-074 White x 22’
200-MB-074 Bronze x 22’
200-WH-045 White x 24’
200-MB-045 Bronze x 24’
200-WH-046 White x 26’
200-MB-046 Bronze x 26’
Architectural 17
2-1/4” x 2” Heavy Channel x 12’
200-WH-103 White
200-MB-103 Bronze
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 10/20/17Eastern Metal SupplyQuality Shapes In Aluminum
Screen Room Enclosure Shapes Florida items are available to all branches via shuttle.
Painted Flat Bar - 6005A T61200-WH-030 .125 x 2 x 20’ White 0.300
200-MB-030 .125 x 2 x 20’ Bronze 0.300
Square Aluminum Painted Tube - 6063-T619-WH-003 3 x .093 x 24' White 1.298
19-MB-003 3 x .093 x 24' Bronze 1.298
200-WH-027 3 x .093 x 30' White 1.298
200-MB-027 3 x .093 x 30' Bronze 1.298
19-WH-225 3 x .125 x 20' White 1.726
19-WH-220 3 x .125 x 24' White 1.726
19-MB-235 3 x .125 x 24' Bronze 1.726
19-IV-235 3 x .125 x 24' Ivory 1.726
19-BG-235 3 x .125 x 24' Beige 1.726
19-BK-235 3 x .125 x 24' Black 1.726
19-COLOR-240 3 x .250 x 24’ ** 3.300
52-COLOR-4424 3.50 x .125 x 24' ** 2.024
19-WH-245 4 x .125 x 20’ White 2.325
19-WH-400 4 x .125 x 24' White 2.325
19-MB-246 4 x .125 x 24' Bronze 2.325
19-IV-400 4 x .125 x 24' Ivory 2.325
19-BG-400 4 x .125 x 24' Beige 2.325
19-BK-400 4 x .125 x 24' Black 2.325
200-WH-028 4 x .125 x 30' White 2.325
200-MB-028 4 x .125 x 30' Bronze 2.325
19-WH-2500 4 x .250 x 20’ White 4.500
19-MB-2500 4 x .250 x 24’ Bronze 4.500
19-IV-2500 4 x .250 x 24’ Ivory 4.500
19-BG-2500 4 x .250 x 24’ Beige 4.500
19-WH-2501 4 x .250 x 24’ 6” White 4.500
Painted Architectural Angle - 6063-T6 Equal Leg11-WH-220 1 x 1 x .062 x 20' White 0.144
11-MB-220 1 x 1 x .062 x 20' Bronze 0.144
11-IV-220 1 x 1 x .062 x 20' Ivory 0.144
11-BG-220 1 x 1 x .062 x 20' Beige 0.144
11-WH-222 1 x 1 x .125 x 20' White 0.276
11-MB-200 1 x 1 x .125 x 20' Bronze 0.276
11-IV-200 1 x 1 x .125 x 20' Ivory 0.276
11-BG-200 1 x 1 x .125 x 20' Beige 0.276
11-WH-210 1.50 x 1.50 x .125 x 20' White 0.431
11-MB-210 1.50 x 1.50 x .125 x 20' Bronze 0.431
11-IV-210 1.50 x 1.50 x .125 x 20' Ivory 0.431
11-BG-210 1.50 x 1.50 x .125 x 20' Beige 0.431
3/4" Picket w/.120 radius (HR-13R)HR-13R-WH20 White x 20’
HR-13R-BR20 Bronze x 20’
HR-13R-WH (MO)
White x 24’
HR-13R-BR (MO)
Bronze x 24’
1" Oval Picket
MILL ORDER52-63-12344
1” Picket x 23’ (HR-5)HR-5-WH White
HR-5-BR Bronze
HR-5-MF (TX) Mill Finish
HR-5-BK
Black x 23’ 6”
3/4” Picket x 19’ 1” (HR-13)HR-13-WH-1 White
HR-13-BR-1 Bronze
HR-13-BK Black
HR-13-WH
White x 22’ 5”
HR-13-BR
Bronze x 22’ 5”
51-63-544 2 x 2 x .093 x 20' White 0.440
51-63-543 2 x 2 x .093 x 20' Bronze 0.440
52-63-013 2 x 2 x .093 x 20' Ivory 0.440
52-63-5804A 2 x 2 x .093 x 24' 3” White 0.440
52-63-5806A 2 x 2 x .093 x 24' 3” Bronze 0.440
11-COLOR-376 2 x 2 x .125 x 20' ** 0.581
11-WH-325 2 x 2 x .250 x 20' White 1.124
11-WH-300 3 x 3 x .250 x 20' White 1.725
Painted Architectural Angle - 6063-T6 Unequal Leg11-WH-365 1 x 2 x .062 x 20' White 0.218
11-MB-365 1 x 2 x .062 x 20' Bronze 0.218
11-IV-365 1 x 2 x .062 x 20' Ivory 0.218
11-BG-365 1 x 2 x .062 x 20' Beige 0.218
51-63-671 1 x 2 x .093 x 16' White 0.324
51-63-672 1 x 2 x .093 x 16' Bronze 0.324
11-WH-370 1 x 2 x .125 x 20' White 0.431
11-MB-370 1 x 2 x .125 x 20' Bronze 0.431
11-IV-370 1 x 2 x .125 x 20' Ivory 0.431
11-BG-370 1 x 2 x .125 x 20' Beige 0.431
11-COLOR-372 1 x 3 x .062 x 20' ** 0.293
11-WH-375 1 x 3 x .125 x 20' White 0.582
11-MB-375 1 x 3 x .125 x 20' Bronze 0.582
11-IV-375 1 x 3 x .125 x 20' Ivory 0.582
11-BG-375 1 x 3 x .125 x 20' Beige 0.582
51-63-518 1.50 x 3 x .093 x 20' White 0.492
51-63-519 1.50 x 3 x .093 x 20' Bronze 0.492
51-63-878 1.50 x 3 x .093 x 20' Ivory 0.492
51-63-884 1.50 x 3 x .093 x 20' Beige 0.492
52-63-8058 1.75 x .632 x .090 x 24’ 3” White 0.247
11-WH-390 2 x 3 x .125 x 20' White 0.750
11-MB-380 2 x 3 x .125 x 20' Bronze 0.750
11-IV-380 2 x 3 x .125 x 20' Ivory 0.750
11-BG-380 2 x 3 x .125 x 20' Beige 0.750
11-WH-395 2 x 3 x .250 x 20' White 1.425
11-COLOR-400 2 x 4 x .125 x 20’ ** 0.881
11-WH-396 2 x 4 x .250 x 20' White 1.725
1-WH-410 2 x 5 x .125 x 20' ** 1.031
11-MB-410 2 x 5 x .125 x 20' ** 1.031
11-IV-410 2 x 5 x .125 x 20' ** 1.031
11-BG-410 2 x 5 x .125 x 20' ** 1.031
11-COLOR-413 2 x 5 x .190 x 20' (inside radius)** 1.568
11-WH-412 2 x 5 x .250 x 20' White 2.024
**COLOR - Available in: White (WH), Bronze (MB), Ivory (IV), Beige (BG)
Please see the Fence, Railing & Castings section
for the complete line of Mechanical Railing shapes.
Hard-Rok
61-00-007Contains no gypsum orchlorides;Quick setting anchoring
cement; Available in 5
Gallon Buckets
Quik Rok
61-00-001Anchoring Cement5 Gallon BucketNEVER to be used to
anchor balcony railing or
any similar human life
safety structures
Architectural 18
Additional Mullions and Clipsavailable next page (Architectural 20)
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/01/16Eastern Metal SupplyQuality Shapes In Aluminum
Engineered Window Mullion and Clip Extrusions
1 x 3-1/8 Light Mullion x 24’
Wall: 1/8” & 3/8”
54314-MBP-1 Bronze
54314-WHP-1 White
54314-DS-1 Desert Sand
1 x 3-1/8 Heavy Mullion x 24’
Wall: 1/8” & 5/8”
54315-MBP-1 Bronze
54315-WHP-1 White
1 x 4 Mullion x 24’
Wall: 1/4”
610236-MBP-1 Bronze
610236-WHP-1 White
2 x 4 Mullion x 24’
Wall: 1/4”
35097-MBP-1 Bronze
35097-WHP-1 White
2 x 6 Mullion x 24’
Wall: 1/4”
610068-MBP-1 Bronze
610068-WHP-1 White
Tube
Mullion
Schematic Bay Mullion Schematic
Our mullions can be used with any Approved Fenestration Product, under separate approval.
Florida Building Code Approved by Engineering - Tube Mulls: 16051.2 • Bay/Bow Mulls: 16051.1
Architectural 19
1” Clip x 12’
52-63-8745Inserts into 20-WH/MB-2320and 20-WH/MB-2350
2” Clip x 12’
52-63-8746Inserts into 2” Rect Tube(.125 Wall)
2” Clip x 12’
52-63-11885Inserts into a 2” Rect Tube(.250 wall)
22.56 Mullion x 24’
54306-MBP-1 Bronze
54306-WHP-1 White
456 Mullion x 24’
54308-MBP-1 Bronze
54308-WHP-1 White
906 Mullion x 24’
54307-MBP-1 Bronze
54307-WHP-1 White
1 x 3-1/8 Mullion U-Clip x 12’
52-63-11886 Mill Finish
Mates with 1 x 3-1/8 Mullions
Fabbed for 1 x 3-1/8 Light Mullion
80008 x 2-1/4” (3 holes)
Fabbed for 1 x 3-1/8 Heavy Mullion
80007 x 1-3/4” (3 holes)
2 x 4 x 1/8 Angle L-Clip x 20’
11-63-395 Mill Finish
Mates with 2 x 4 Mullion
Fabbed for 22.5° Mullion; 45° Mullion; 90° Mullion
80006 x 2-3/4” (4 holes)
Fabbed for 1 x 4 Mullion; 2 x 4 Mullion
80004 x 3-3/8” (4 holes)
Fabbed for 2 x 6 Mullion
80005 x 5-3/8” (4 holes)
2 x 5 x 1/8 Angle L-Clip x 20’
11-63-405 Mill Finish
Fabbed for 1 x 3-1/8 Light Mullion
80002 x 2-1/4” (3 holes)
Fabbed for 1 x 3-1/8 Heavy Mullion
80003 x 1-3/4” (3 holes)
1 x 3-1/8 Mullion Clip x 12’
54316-63-1 Mill Finish
Mates with 1 x 3-1/8 Mullions
Fabbed for 1 x 3-1/8 Light Mullion
80000 x 2-1/4” (6 holes)
Fabbed for 1 x 3-1/8 Heavy Mullion
80001 x 1-3/4” (6 holes)
1 x 4 Mullion Clip x 12’
54442-63-1 Mill Finish
Mates with 1 x 4 Mullion
Fabbed for 1 x 4 Mullion
80009 x 3-3/8” (8 holes)
1” Inside U-Clip x 12’
52-63-11886
Inserts into 1” Rect Tube (.125 Wall)
2” Inside U-Clip x 12’
52-63-11887
Inserts into 2” Rect Tube (.125 Wall)
1 x 2-3/4 Mullion
Bars x 24’
Wall: .375/.125
20-MB-2320 Bronze
20-WH-2320 White
1 x 4 Mullion
Bars x 24’
Wall: .375/.125
20-MB-2350 Bronze
20-WH-2350 White
Additional Painted Bars
on Standards p36
Non-Engineered Window Mullion and Clip Extrusions
Engineered Window Mullion and Clip ExtrusionsOur mullions can be used with any Approved Fenestration Product, under separate approval.
Florida Building Code Approved by Engineering - Tube Mulls: 16051.2 • Bay/Bow Mulls: 16051.1
EMS FL
1-800-432-2204
(561) 588-4780 - fax
EMS NC
1-800-343-8154
(704) 391-2267 - fax
EMS TX
1-800-996-6061
(281) 656-2297 - fax
EMS MO
1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/01/16Eastern Metal SupplyQuality Shapes In Aluminum
Architectural 20