Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 1Report Ref.: SP19469
22 bd Benoni Goullin44200 NANTES - FRANCE +33 2 40 18 09 16 [email protected] www.systemplus.fr
Sunny Optical Folded Optics “Periscope” Camera Modulex5 optical zoom in Huawei P30 ProSP19469 - IMAGING report by Audrey LAHRACH
PHYSICAL ANALYSIS done by Guillaume CHEVALIERJuly 2019 – Sample
REVERSE COSTING® – STRUCTURAL, PROCESS & COST REPORT
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 2Report Ref.: SP19469
Table of Contents
Overview / Introduction 4
o Executive Summary
o Reverse Costing Methodology
Company Profile & Supply Chain 8
o Sony
o TDK
o Sunny Optical
Physical Analysis 14
o Summary of the Physical Analysis
o Smartphone disassembly
o Folded Optic Periscope CM
Module Views
Module Disassembly
Module Cross-Section
o Prism Part
View & Dimensions
Disassembly
o Lens Module
View & Dimensions
Disassembly
o Camera Module Cross-Section
o CIS Die
CIS Die View & Dimensions
CIS Delayering & main Blocs
CIS Die Process
CIS Die Cross-Section
CIS Die Process Characteristic
Comparison with the Huawei P20 Telephoto Camera 75
Sensor Manufacturing Process 80
o Logic Circuit Front-End Process
o Pixel Array Front-End Process
o BSI + Cu-Cu Hybrid Bonding + Microlens Processes
o CIS Wafer Fabrication Unit
o Final Test & Packaging Fabrication unit
Cost Analysis 88
o Summary of the cost analysis
o Yields Explanation & Hypotheses
o CMOS Image Sensor Cost
Logic Circuit Front-End Cost
Pixel Array Front-End Cost
BSI & Cu-Cu Hybrid Bonding Front-End Cost
Color Filter & Microlens Front-End Cost
Total Front-End Cost
Back-End: Tests & Dicing
CIS Wafer and Die Cost
o Camera Module Assembly Cost
Lens Module Cost
AFA/OIS Cost
Prism Cost
Final Assembly Cost
o Camera Module Cost
Cost Comparison 105
Selling price 109
Feedbacks 111
SystemPlus Consulting services 113
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 3Report Ref.: SP19469
Overview / Introductiono Executive Summaryo Reverse Costing
Methodologyo Glossary
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Executive Summary
This full reverse costing study has been conducted to provide insight on technology data, manufacturing cost and selling priceof the Huawei P30 Pro Folded Optics Periscope Camera Module.
The competition for the best camera phone is led by Huawei with its latest flagship product, the P30 Pro. Huawei has been in this position before, as its P9 model was among the first to switch to dual cameras on the back. The module in the P30 Pro that integrates a CMOS Image Sensor (CIS) from Sony, which uses Exmor-RS Technology, has now an 8.2M pixel resolution telephoto camera offering x5 optical zoom and x50 digital zoom.
The Huawei P30 Pro Periscope Camera is integrated in a quad camera solution in the rear face of the phone. The quad camera solution includes a main camera, a wide-angle camera and a folded optic periscope for the telephoto camera function, combined with a time-of-flight (TOF) camera. This configuration produces better photo quality.
The P30 Pro telephoto camera module has dimensions of 29mm x 17.8mm x 5.85mm. It is equipped with a Sony CIS, a Sunny optical 5-element lens and prism, and a TDK autofocus (AF) and optical image stabilization (OIS) component.
This is the first camera that integrates a prism in the optical part. Thanks to the prism, the CIS receives light at 90° compared to the direction of the photo taken. This gives more space for the optical module to move compare to standard telephoto camera module.
The report includes a complete technology and cost analysis of the Huawei P30 Pro folded optic periscope camera module that includes the CIS die, the lens module, the prism, the voice coil motor (VCM) and the housing. Also, comparisons with the Huawei P20 Pro telephoto camera are provided. These comparisons highlight structures, technical choices and manufacturing cost.
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 4Report Ref.: SP19469
Overview / Introductiono Executive Summaryo Reverse Costing
Methodologyo Glossary
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
The reverse costing analysis is conducted in 3 phases:
Teardown analysis
• Package is analyzed and measured• The dies are extracted in order to get overall data: dimensions, main blocks, pad number and pin out, die marking• Setup of the manufacturing process.
Costing analysis
• Setup of the manufacturing environment• Cost simulation of the process steps
Selling price analysis
• Supply chain analysis• Analysis of the selling price
Executive Summary
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 5Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Periscope Camera Module Views & Dimensions
Periscope CM Back View©2019 by System Plus Consulting
Periscope CM Front View©2019 by System Plus Consulting
17.8 mm
29
mm
5.85 mm
Periscope CM Back View©2019 by System Plus Consulting
XX
mm
Connector
2x16 Positions
XX mm
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 6Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Periscope Camera Module RX View
Periscope CM Overview – X-ray view©2019 by System Plus Consulting
CIS Die Lens Module PrismSolder Copper tracksConnector
Metal CoverMagnet
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 7Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Periscope Camera Module Disassembly – FPC Substrate Removed
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 8Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Periscope Prism Overview
Periscope prism Overview©2019 by System Plus Consulting
xxxx
Periscope prism Overview©2019 by System Plus Consulting
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 9Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Periscope Lens Module Disassembly
Lens module Disassembly – Metal Cover removed©2019 by System Plus Consulting
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 10Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Package Cross-Section
Package Cross-section plane #1©2019 by System Plus Consulting
Cross-section plane #1
#1
Flex
PC
B
Lens
Barrel
Prism
Magnet
Coil
CIS Die
Filter
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 11Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
CIS Overview & Dimensions
Die Sensor - Overview©2019 by System Plus Consulting
xxxx
mm
xxx mm
o Die Area: xxx mm²(xxx x xxx mm)
o Nb of PGDW per 12-inch wafer: xxxx
o Pad number: xx
o Connected: xx
o Pixel array: xxxmm²(xxx x xxx mm)
o CIS resolution: 3300x2475 (8.2Mp)
o Pixel area: xxxµm²
o Pixel size: xxxµm
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 12Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Sensor Process – Technology Node
MOS Gate Length Measurement - SEM View©2019 by System Plus Consulting
CMOS Transistors - SEM View©2019 by System Plus Consulting
o The process uses CMOS transistors
o MOS transistor gate length: xxnm
o Technology node: xxnm
xxnm
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 13Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis o Smartphone disassemblyo Folded Optics Periscope CMo Prism Parto Lens Moduleo Camera Module Cross-
Sectiono CIS Die
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Metal Layers Cross-Section - SEM View©2019 by System Plus Consulting
Sensor Cross-Section – Metal Layers
Pixel Array circuit(BSI)
Logic circuit
Active silicon with pixels
Microlenses & Color filters
CIS Circuit Metal Layers
Logic Circuit Metal Layers
Silicon Substrate
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 14Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flowo Logic Circuit FE Processo Pixel Array FE Processo BSI + Hybrid Bonding +
Microlens Processeso CIS Wafer Fab Unito Final Test & Packaging Fab
unit
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
CIS Front-End Process
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 15Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso CIS Sensor Costo Camera Module Assembly
Costo Camera Module Cost
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Logic Circuit Front-End Cost
The front-end cost for logic circuit ranges from $xxx to $xxx according toyield variations.
The largest portion of the manufacturing cost is due to the xxxxxxxxx atxx%.
We estimate a gross margin of xx% for the foundry xxxx, which results in afront-end price ranging from $xxxx to $xxx. This corresponds to the sellingprice to xxxx.
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 16Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso CIS Sensor Costo Camera Module Assembly
Costo Camera Module Cost
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Total CIS Front-End Cost
The front-end cost for the CIS ranges from $xxxx to $xxxxaccording to yield variations.
The largest portion of the manufacturing cost is due to the xxxxat xxx%.
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 17Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso CIS Sensor Costo Camera Module Assembly
Costo Camera Module Cost
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Lens Module Cost
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 18Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysiso Cost Analysis Summaryo Yields Explanation &
Hypotheseso CIS Sensor Costo Camera Module Assembly
Costo Camera Module Cost
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Camera Module Cost
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 19Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Plus
Related Reports
MARKET AND TECHNOLOGY REPORTS - YOLE DÉVELOPPEMENT
IMAGING• Status of the Camera Module Industry 2019 – Focus on Wafer
Level Optics• Status of the CMOS Image Sensor Industry 2018• CMOS Image Sensor Service – Imaging Research
REVERSE COSTING ANALYSES - SYSTEM PLUS CONSULTING
IMAGING• Mobile CMOS Image Sensor Comparison 2019• Mobile Camera Module Comparison 2019• Huawei Mate 20 Pro’s 3D Depth-Sensing System
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 20Report Ref.: SP19469
COMPANYSERVICES
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 21Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Pluso Company serviceso Contact
Business Models Fields of Expertise
Custom Analyses(>130 analyses per year)
Reports(>60 reports per year)
Costing Tools
Trainings
©2019 by System Plus Consulting | Sunny Optical Folded Optics “Periscope” Camera Module 22Report Ref.: SP19469
Overview / Introduction
Company Profile & Supply Chain
Physical Analysis
Physical Comparison
Manufacturing Process Flow
Cost Analysis
Cost Comparison
Selling Price Analysis
Related Reports
About System Pluso Company serviceso Contact
Contact
Headquarters22 bd Benoni Goullin44200 NantesFRANCE+33 2 40 18 09 [email protected]
Europe Sales OfficeLizzie LEVENEZFrankfurt am MainGERMANY+49 151 23 54 41 [email protected]
www.systemplus.fr
Asia Sales OfficeTakashi ONOZAWATokyoJAPANT : +81 804 371 [email protected]
Mavis WANGTAIWANT :+886 979 336 [email protected]
NANTESHeadquarter
FRANKFURT/MAINEurope Sales Office
LYONYOLE HQ
TOKYOYOLE KK
GREATER CHINAYOLE
PHOENIXYOLE Inc.
KOREAYOLE
America Sales OfficeSteve LAFERRIEREPhoenix, AZWESTERN UST : +1 310 600 [email protected]
Chris YOUMANEASTERN US & CANADAT : +1 919 607 9839 [email protected]
ORDER FORMPlease process my order for “Sunny Optical Folded Optics “Periscope” Camera Module” Reverse Costing® – Structure, Process & Cost Report Ref: SP19469
Full Structure, Process & Cost Report : EUR 3,990* Annual Subscription offers possible from 3 reports, including this
report as the first of the year. Contact us for more information.
SHIP TO
Name (Mr/Ms/Dr/Pr): .............................................................
Job Title: …….............................................................................
Company: ….............................................................................
Address: …….............................................................................
City: ………………………………… State: ..........................................
Postcode/Zip: ..........................................................................
Country: ……............................................................................
VAT ID Number for EU members: ..........................................
Tel: ……………….........................................................................
Email: .....................................................................................
Date: ......................................................................................
Signature: ..............................................................................
BILLING CONTACT
First Name : ............................................................................
Last Name: …….......................................................................
Email: …..................................................................................
Phone: ……..............................................................................
PAYMENT
By credit card:
Number: |__|__|__|__| |__|__|__|__| |__|__|__|__|
|__|__|__|__|
Expiration date: |__|__|/|__|__|
Card Verification Value: |__|__|__|
By bank transfer:HSBC - CAE- Le Terminal -2 rue du Charron - 44800 St Herblain FranceBIC code: CCFRFRPP• In EUR
Bank code : 30056 - Branch code : 00955 - Account : 09550003234 IBAN: FR76 3005 6009 5509 5500 0323 439
• In USDBank code : 30056 - Branch code : 00955 - Account : 09550003247 IBAN: FR76 3005 6009 5509 5500 0324 797
REVERSE COSTING® – STRUCTURE, PROCESS & COST REPORTSUNNY OPTICAL FOLDED OPTICS "PERISCOPE" CAMERA MODULE
Each year System Plus Consultingreleases a comprehensive collectionof new reverse engineering andcosting analyses in various domains.You can choose to buy over 12months a set of 3, 4, 5, 7, 10 or 15Reverse Costing® reports.
Up to 47% discount!
More than 60 reports released eachyear on the following topics(considered for 2018):• MEMS & Sensors: Accelerometer
– Environment - Fingerprint - Gas - Gyroscope - IMU/Combo -Microphone - Optics - Oscillator -Pressure
• Power: GaN - IGBT - MOSFET - Si Diode - SiC
• Imaging: Camera - Spectrometer• LED and Laser: UV LED – VCSEL -
White/blue LED• Packaging: 3D Packaging -
Embedded - SIP - WLP• Integrated Circuits: IPD –
Memories – PMIC - SoC• RF: FEM - Duplexer• Systems: Automotive - Consumer
- Energy - Telecom
ANNUAL SUBSCRIPTIONS
Return order by: FAX: +33 2 53 55 10 59MAIL: SYSTEM PLUS CONSULTING
22, bd Benoni GoullinNantes Biotech44200 Nantes – France
EMAIL: [email protected]
*For price in dollars please use the day’s exchange rate *All reports are delivered electronically in pdf format*For French customer, add 20 % for VAT*Our prices are subject to change. Please check our new releases and price changes on www.systemplus.fr. The present document is valid 6 months after its publishing date: July 2019
1.INTRODUCTIONThe present terms and conditions apply to the offers, sales and deliveries of services managed by System PlusConsulting except in the case of a particular written agreement.Buyer must note that placing an order means an agreement without any restriction with these terms and conditions.
2.PRICESPrices of the purchased services are those which are in force on the date the order is placed. Prices are in Euros andworked out without taxes. Consequently, the taxes and possible added costs agreed when the order is placed will becharged on these initial prices.System Plus Consulting may change its prices whenever the company thinks it necessary. However, the companycommits itself in invoicing at the prices in force on the date the order is placed.
3.REBATES and DISCOUNTSThe quoted prices already include the rebates and discounts that System Plus Consulting could have granted accordingto the number of orders placed by the Buyer, or other specific conditions. No discount is granted in case of earlypayment.
4.TERMS OF PAYMENTSystem Plus Consulting delivered services are to be paid within 30 days end of month by bank transfer except in thecase of a particular written agreement.If the payment does not reach System Plus Consulting on the deadline, the Buyer has to pay System Plus Consulting apenalty for late payment the amount of which is three times the legal interest rate. The legal interest rate is thecurrent one on the delivery date. This penalty is worked out on the unpaid invoice amount, starting from the invoicedeadline. This penalty is sent without previous notice.When payment terms are over 30 days end of month, the Buyer has to pay a deposit which amount is 10% of the
total invoice amount when placing his order.
5. OWNERSHIPSystem Plus Consulting remains sole owner of the delivered services until total payment of the invoice.
6.DELIVERIESThe delivery schedule on the purchase order is given for information only and cannot be strictly guaranteed.Consequently any reasonable delay in the delivery of services will not allow the buyer to claim for damages or tocancel the order.
7.ENTRUSTED GOODS SHIPMENTThe transport costs and risks are fully born by the Buyer. Should the customer wish to ensure the goods against lost ordamage on the base of their real value, he must imperatively point it out to System Plus Consulting when theshipment takes place. Without any specific requirement, insurance terms for the return of goods will be the carriercurrent ones (reimbursement based on good weight instead of the real value).
8.FORCE MAJEURESystem Plus Consulting responsibility will not be involved in non execution or late delivery of one of its dutiesdescribed in the current terms and conditions if these are the result of a force majeure case. Therefore, the forcemajeure includes all external event unpredictable and irresistible as defined by the article 1148 of the French CodeCivil?
9.CONFIDENTIALITYAs a rule, all information handed by customers to system Plus Consulting are considered as strictly confidential.A non-disclosure agreement can be signed on demand.
10.RESPONSABILITY LIMITATIONThe Buyer is responsible for the use and interpretations he makes of the reports delivered by System Plus Consulting.Consequently, System Plus Consulting responsibility can in no case be called into question for any direct or indirectdamage, financial or otherwise, that may result from the use of the results of our analysis or results obtained usingone of our costing tools.
11.APPLICABLE LAWAny dispute that may arise about the interpretation or execution of the current terms and conditions shall be resolvedapplying the French law.It the dispute cannot be settled out-of-court, the competent Court will be the Tribunal de Commerce de Nantes.
TERMS AND CONDITIONS OF SALES