Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
450 Harrison Ave Boston MA 02118 I T 617.955.9377 I [email protected] I www.casaoutdoorboston.com450 Harrison Ave Boston MA 02118 I T 617.955.9377 I [email protected] I www.casaoutdoorboston.com
DesignRodolfo Dordoni
DescriptionSide table for outdoor use
StructurePowder coated steel cleaned and treated with an electrolytic process of hard iron phosphatisation. This pre-painting guarantees a higher resistance to corrosion and it removes polluting substances. Its effect is reinforced with a following nanotechnology anticorrosive treatment and with an electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.
TopPowder coated steel (see “structure”) or HPL grey.HPL (High pressure laminate) of a great quality with a characteristic black heart, very resistant to wear and tear, humidity, steam, UV, fungi, spores and mould. It is self-extinguishing and it is class 2 fire resistant; it does not contain chlorine or asbestos and it is certifies by Fira Institute for coming in contact with foodstuff.
BaseGrey granite stone, brushed with a natural effect.
Weight14 kg
Similar products
Maintenance
Finishes
SteelIn case of exposition to weather conditions, it is recommended to wash regularly the product with mild tepid water. In case cleaning is needed, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Eventual rusty formation must be treated with a rust stopper and eventually touched up with the paint stick in the same color of structure, supplied by RODA.
structuremetal\01 smoketop21 hpl greybaseSimplon white
structuremetal\02 milktop21 hpl greybaseSimplon white
BERNARDO 353 side table
HPLUse a water-soaked cloth and in case of persistent spots, use a neutral soap UNIVERSAL CLEANER. Dry carefully. Do not use abrasive products, acid substances, chemical aggressive solvents.
StoneAll stones are protected by an anti-spot treatment, but it is recommended to clean with care the surface to maintain their original aspect in the course of time. In case of spots, it is necessary to clean them immediately with natural soap and absorbent cloth in order not to remove the protection treatment.
For a normal cleaning, use a soaked cloth with distilled water. Only in case of obstinate spots, use few drops of ammonia diluted with water. In any case, try it in a hidden part to verify its efficiency and its no-damaging effect. Do not use abrasive products, acid substances, chemical aggressive solvents.
BRD353-01-21 BRD353-02-21
ROOT 045 side table STORK 001 side table
53
structuremetal\01 smoketopmetal 01 smokebaseSimplon white
BRD353-01-01
structuremetal\02 milktopmetal 02 milkbaseSimplon white
BRD353-02-02
50 50
DesignRodolfo Dordoni
DescriptionSunlounger for outdoor use.Reclining back 3 positions
Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.
Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.
CushionsStandard or hydro-draining
WeightStructure: 22 kgCushion: 5 kg
Storage coverAvailable
Similar products
Maintenance
Finishes
Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.
structureinox\ 01 smokecord01 grey
HARP 304 sunlounger
To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.
CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents
HRP304-01-01
MISTRAL 104 sunlounger
32
19572
32
6
structureinox\ 02 milkcord 02 sand
HRP304-02-02
NETWORK 142 sunlounger
structureinox\ 04 carob cord 04 tobacco
HRP304-04-04
ORSON 008 sunlounger
DesignRodolfo Dordoni
DescriptionSunlounger for outdoor use.Reclining back 3 positions
Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.
Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.
CushionsStandard or hydro-draining
WeightStructure: 22 kgCushion: 5 kg
Storage coverAvailable
Similar products
Maintenance
Finishes
Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.
structureinox\ 01 smokecord01 grey
HARP 304 sunlounger
To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.
CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents
HRP304-01-01
MISTRAL 104 sunlounger
32
19572
32
6
structureinox\ 02 milkcord 02 sand
HRP304-02-02
NETWORK 142 sunlounger
structureinox\ 04 carob cord 04 tobacco
HRP304-04-04
ORSON 008 sunlounger
DesignRodolfo Dordoni
DescriptionSunlounger for outdoor use.Reclining back 3 positions
Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.
Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.
CushionsStandard or hydro-draining
WeightStructure: 22 kgCushion: 5 kg
Storage coverAvailable
Similar products
Maintenance
Finishes
Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.
structureinox\ 01 smokecord01 grey
HARP 304 sunlounger
To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.
CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents
HRP304-01-01
MISTRAL 104 sunlounger
32
19572
32
6
structureinox\ 02 milkcord 02 sand
HRP304-02-02
NETWORK 142 sunlounger
structureinox\ 04 carob cord 04 tobacco
HRP304-04-04
ORSON 008 sunlounger
DesignRodolfo Dordoni
DescriptionOutdoor sofa system
Structure Aluminium coated with a polyester paint;304 stainless steel hardware; adjustable feet.
PaddingMade by three different types of open-cell polyurethanes enclosed in a 3D net;the padding is fixed to the structure by elastic belts in syntetic rubber.
CoversMade with outdoor fabrics; with filtering profiles. The sofa is completely removable. Storage coverAvailable
DANDY exclusive outdoor fabric collection *
DANDY sofa system
CAT. 3 / HD3
CAT. 1 / HD1
QUILT Q01 white(scale 1:5)
QUILT Q02 mole(scale 1:5)
HAMPER J01 sand(scale 1:2)
HAMPER J02 mole(scale 1:2)
PANAMA X01 pearl PANAMA X02 steel PANAMA X03 lime PANAMA X04 pink
HIVE F01 ivory HIVE F02 peanut HIVE F03 oil HIVE F04 fuchsia
PIXEL E01 sand PIXEL E02 peanut PIXEL E03 oil PIXEL E04 fuchsia
PLOT D01 sand PLOT D02 mole PLOT D03 oil PLOT D04 fuchsia
CAT. 2 / HD2
* DANDY can be made also with all the outdoor fabrics present in RODA range.
DANDAY Sectional 1
DesignRodolfo Dordoni
DescriptionOutdoor sofa system
Structure Aluminium coated with a polyester paint;304 stainless steel hardware; adjustable feet.
PaddingMade by three different types of open-cell polyurethanes enclosed in a 3D net;the padding is fixed to the structure by elastic belts in syntetic rubber.
CoversMade with outdoor fabrics; with filtering profiles. The sofa is completely removable. Storage coverAvailable
DANDY exclusive outdoor fabric collection *
DANDY sofa system
CAT. 3 / HD3
CAT. 1 / HD1
QUILT Q01 white(scale 1:5)
QUILT Q02 mole(scale 1:5)
HAMPER J01 sand(scale 1:2)
HAMPER J02 mole(scale 1:2)
PANAMA X01 pearl PANAMA X02 steel PANAMA X03 lime PANAMA X04 pink
HIVE F01 ivory HIVE F02 peanut HIVE F03 oil HIVE F04 fuchsia
PIXEL E01 sand PIXEL E02 peanut PIXEL E03 oil PIXEL E04 fuchsia
PLOT D01 sand PLOT D02 mole PLOT D03 oil PLOT D04 fuchsia
CAT. 2 / HD2
* DANDY can be made also with all the outdoor fabrics present in RODA range.
DesignRodolfo Dordoni
DescriptionOutdoor sofa system
Structure Aluminium coated with a polyester paint;304 stainless steel hardware; adjustable feet.
PaddingMade by three different types of open-cell polyurethanes enclosed in a 3D net;the padding is fixed to the structure by elastic belts in syntetic rubber.
CoversMade with outdoor fabrics; with filtering profiles. The sofa is completely removable. Storage coverAvailable
DANDY exclusive outdoor fabric collection *
DANDY sofa system
CAT. 3 / HD3
CAT. 1 / HD1
QUILT Q01 white(scale 1:5)
QUILT Q02 mole(scale 1:5)
HAMPER J01 sand(scale 1:2)
HAMPER J02 mole(scale 1:2)
PANAMA X01 pearl PANAMA X02 steel PANAMA X03 lime PANAMA X04 pink
HIVE F01 ivory HIVE F02 peanut HIVE F03 oil HIVE F04 fuchsia
PIXEL E01 sand PIXEL E02 peanut PIXEL E03 oil PIXEL E04 fuchsia
PLOT D01 sand PLOT D02 mole PLOT D03 oil PLOT D04 fuchsia
CAT. 2 / HD2
* DANDY can be made also with all the outdoor fabrics present in RODA range.
DesignRodolfo Dordoni
DescriptionOutdoor sofa system
Structure Aluminium coated with a polyester paint;304 stainless steel hardware; adjustable feet.
PaddingMade by three different types of open-cell polyurethanes enclosed in a 3D net;the padding is fixed to the structure by elastic belts in syntetic rubber.
CoversMade with outdoor fabrics; with filtering profiles. The sofa is completely removable. Storage coverAvailable
DANDY exclusive outdoor fabric collection *
DANDY sofa system
CAT. 3 / HD3
CAT. 1 / HD1
QUILT Q01 white(scale 1:5)
QUILT Q02 mole(scale 1:5)
HAMPER J01 sand(scale 1:2)
HAMPER J02 mole(scale 1:2)
PANAMA X01 pearl PANAMA X02 steel PANAMA X03 lime PANAMA X04 pink
HIVE F01 ivory HIVE F02 peanut HIVE F03 oil HIVE F04 fuchsia
PIXEL E01 sand PIXEL E02 peanut PIXEL E03 oil PIXEL E04 fuchsia
PLOT D01 sand PLOT D02 mole PLOT D03 oil PLOT D04 fuchsia
CAT. 2 / HD2
* DANDY can be made also with all the outdoor fabrics present in RODA range.
FOR MORE FABRIC OPTIONS PLEASE EMAIL US!