Click here to load reader
Upload
gilbert-leonard
View
217
Download
0
Embed Size (px)
DESCRIPTION
PAGE 3 Wireless Technology Evaluation in PAP2: Wireless SDOs The PAP2 SDO subcommittee, consisting of representatives from IEEE , ATIS, TIA TR45.5, and WiMAX Forum, continues to develop technology assessment methodology –The group meets every Monday 9:00 to 10:30 a.m. PST –The goal of this group is to update the NIST IR 7761 Guidelines for Assessing Wireless Standards for Smart Grid Applications, with a focus on the wireless communication aspects –SDO subcommittee reports progress to PAP2 during biweekly PAP2 calls Recent focus of the PAP2 SDO subcommittee is to complete chapters 4, 5, and 6 of the guideline document –Chapter 4: wireless technology descriptions correspond to “Wireless Functionality and Characteristic Matrix for the Identification of Smart Grid Domain Applications” (http://collaborate.nist.gov/twiki- sggrid/pub/SmartGrid/PAP02Objective2/Consolidated_NIST_Wireless_Characteristi cs_Matrix-V5.xls)“Wireless Functionality and Characteristic Matrix for the Identification of Smart Grid Domain Applications” (http://collaborate.nist.gov/twiki- sggrid/pub/SmartGrid/PAP02Objective2/Consolidated_NIST_Wireless_Characteristi cs_Matrix-V5.xls –Chapter 5: wireless technology evaluation method that includes an initial screening and refinements to the screening using a combination of analysis, simulation, and/or testbed in the field. –Chapter 6: Performance metric and associated considerations 3 C
Citation preview
Summary of SGIP PAP2 2011 Activities since October 2011
Mingxi Fan, Jing SunTR-45.5 Liaison to SGIP PAP2
April 16th, 2012
©2011 Third Generation Partnership Project Two (3GPP2).All rights reserved. Permission is granted for copying, reproducing, or duplicating this document only for the legitimate purposes of 3GPP2 and its organizational partners. No other copying, reproduction, or distribution is permitted.
Chicago, IL C00-20120416-058
PAGE 2
General Background: PAP2 in SGIP
• Smart Grid Interoperability Panel Priority Action Plan 2 (http://collaborate.nist.gov/twiki-sggrid/bin/view/SmartGrid/SGIP ) works on wireless technologies for smart grid
• In January 2011, PAP2 approved a document summarizing its work in 2010, “Guidelines for Assessing Wireless Standards for Smart Grid Applications.” (http://collaborate.nist.gov/twiki-sggrid/pub/SmartGrid/PAP02Objective3/NIST_PAP2_Guidelines_for_Assessing_Wireless_Standards_for_Smart_Grid_Applications_1.0.pdf)
– Guidelines’ main content is a discussion of wireless air interface modeling– Specific technology performance in that document is from the respective SDOs in the
Annex A through E: Wi-Fi, LTE, HSPA, cdma2000, and WiMAX
• In 2011, PAP has been focusing on the evaluation of wireless technologies– In the SGIP Catalog of Standards (
http://collaborate.nist.gov/twiki-sggrid/bin/view/SmartGrid/SGIPCatalogOfStandards), none of the cellular standards have been “identified.” cdma2000 1x and HRPD are listed under the “under review” section.
2
C00-20111205-028
PAGE 3
Wireless Technology Evaluation in PAP2: Wireless SDOs• The PAP2 SDO subcommittee, consisting of representatives from IEEE
802.11, ATIS, TIA TR45.5, and WiMAX Forum, continues to develop technology assessment methodology
– The group meets every Monday 9:00 to 10:30 a.m. PST – The goal of this group is to update the NIST IR 7761 Guidelines for Assessing
Wireless Standards for Smart Grid Applications, with a focus on the wireless communication aspects
– SDO subcommittee reports progress to PAP2 during biweekly PAP2 calls
• Recent focus of the PAP2 SDO subcommittee is to complete chapters 4, 5, and 6 of the guideline document
– Chapter 4: wireless technology descriptions correspond to “Wireless Functionality and Characteristic Matrix for the Identification of Smart Grid Domain Applications” (http://collaborate.nist.gov/twiki-sggrid/pub/SmartGrid/PAP02Objective2/Consolidated_NIST_Wireless_Characteristics_Matrix-V5.xls)
– Chapter 5: wireless technology evaluation method that includes an initial screening and refinements to the screening using a combination of analysis, simulation, and/or testbed in the field.
– Chapter 6: Performance metric and associated considerations3
C00-20111205-028
PAGE 4
Status of Guideline Development
• Chapter 4– 90+% complete– Pending final review of the text by the group– No plan for resubmitting the matrix
• Chapter 5 – Capacity estimation method and Link/MAC/System modeling review
complete– Spectrum choices and deployment modeling tool currently under review – Target to be completed by May 2012
• Chapter 6 – Has not started – Need to decide specific content and seeking lead editor– Additional details on the spectrum allocation and options in the US needs
to be considered
C00-20111205-028
PAGE 5
Smart Grid Modeling Tool Interface under Development
5
C00-20111205-028
PAGE 6
Modeling Tool Status
• Not yet fully reviewed by SDO-subcommittee
• Limited to land-based, outdoor BS, & PMP topology, indoor or outdoor terminal locations– 5 Outdoor path loss models to choose from– Covers 700 MHz to 6000 MHz– BS antenna heights 7 to 80 meters in rural and suburban with varied (but
not extreme) terrain characteristics – 10 meter BS antenna height for urban microcell, otherwise above rooftops– Handles TDD and FDD– Channel capacity estimates based on uniform distribution of terminals –
and will differentiate between DL and UL
• Estimates for penetration loss & interference margins based on limited data/references
6