1
CAS Reg. No. : EINECS No. : TSCA: Mol.Wt. : Tariff Code : NAME SULFOLANE - Aqueous Other names: Thiocyclopentane-1,1-dioxide; (cyclo)tetramethylene sulphone ; 2,3,4,5-Tetrahydrothiophene-1,1-dioxide PACKING Drums Steel drums 250 kg net Bulk: Road tankers/Iso-containers FURTHER INFORMATION 126-33-0 2047831 Listed 120.17 29309070 SALES SPECIFICATION Property Density at 30 deg. C Sulfur, Thermal stability test as SO2 Water: Ash Distillation Range (not more than 5% below) Distillation Range (not less than 95% below) Units g/ml wt % mg/kg SO2 % m/m wt % deg. C deg. C Value 1.260-1.270 26.0 – 27.0 10 maximum 3.0 maximum 0.1 maximum 282 288 Method ASTM D4052 * ASTM D4045 UOP 599 ASTM E203 ASTM D482 ASTM D1078 * ASTM D1078 * GLC ANALYSIS * Water is removed by adding excess isopropanol and then distilling off all the water/isopropanol azeotrope, together with the excess isopropanol. The sample is cooled and ASTM D D4052 and ASTM 1078 is carried out.. Sulfolene-2 - dry basis Isopropyl sulfolanyl ether Appearance Assay – Dry Basis % m/m wt % % m/m 0.2 maximum 0.2 maximum 99.5% minimum UOP 608 UOP 608 G.C. Colourless to Pale straw For further information contact your local TSC representative. Before handling this product the relevant Safety Data Sheet should be consulted.

SULFOLANE - Aqueous · 2018-02-27 · UOP 599 ASTM E203 ASTM D482 ASTM D1078 * ASTM D1078 * GLC ANALYSIS * Water is removed by adding excess isopropanol and then distilling off all

  • Upload
    others

  • View
    78

  • Download
    0

Embed Size (px)

Citation preview

Page 1: SULFOLANE - Aqueous · 2018-02-27 · UOP 599 ASTM E203 ASTM D482 ASTM D1078 * ASTM D1078 * GLC ANALYSIS * Water is removed by adding excess isopropanol and then distilling off all

CAS Reg. No. :EINECS No. :TSCA:Mol.Wt. :Tariff Code :

NAME

SULFOLANE - Aqueous

Other names: Thiocyclopentane-1,1-dioxide;

(cyclo)tetramethylene sulphone ;

2,3,4,5-Tetrahydrothiophene-1,1-dioxide

PACKINGDrums Steel drums 250 kg net Bulk: Road tankers/Iso-containers

FURTHER INFORMATION

126-33-02047831Listed120.1729309070

SALES SPECIFICATION

Property

Density at 30 deg. C

Sulfur,

Thermal stability test as SO2

Water:

Ash

Distillation Range (not more than 5% below)

Distillation Range(not less than 95% below)

Units

g/ml

wt %

mg/kg SO2

% m/m

wt %

deg. C

deg. C

Value

1.260-1.270

26.0 – 27.0

10 maximum

3.0 maximum

0.1 maximum

282

288

Method

ASTM D4052 *

ASTM D4045

UOP 599

ASTM E203

ASTM D482

ASTM D1078 *

ASTM D1078 *

GLC ANALYSIS

* Water is removed by adding excess isopropanol and then distilling off all the water/isopropanol azeotrope, together with the excess isopropanol. The sample is cooled and ASTM D D4052 and ASTM 1078 is carried out..

Sulfolene-2 - dry basis

Isopropyl sulfolanyl ether

Appearance

Assay – Dry Basis

% m/m

wt %

% m/m

0.2 maximum

0.2 maximum

99.5% minimum

UOP 608

UOP 608

G.C.

Colourless to Pale straw

For further information contact your local TSC representative.Before handling this product the relevant Safety Data Sheet should be consulted.