If you can't read please download the document
Upload
deceuninckdeforce
View
767
Download
11
Tags:
Embed Size (px)
Citation preview
Furniture & Architectural Hardware
No.18220090330
Sugatsune A hardware manufacturer with worldwide reputation for high quality products that combines ingenious design with meticulous attention to detail.
20090330
70 YEARS OF CRAFTSMANSHIPSugatsune has a rich tradition of manufacturing and distributing premium high-quality hardware. Architects, designers and builders continue to depend on our unsurpassed quality and unparalleled craftsmanship.
INNOVATION AND QUALITY ASSUREDOur products are not just hardware, they are quality hardware that can be recognized by touch. Small to large, our product will bring difference to the application with its function and style.Headquarters - Tokyo, Japan
STAINLESS STEELNothing beats the strength and durability of stainless steel. When you need products that can stand up to corrosion, harsh chemicals, sterilization and rigors of inclement weather, Sugatsune is the brand you can rely on.
U.K. office - Henley-on-Thames, Oxfordshire
ULTRA-premium flagship range. Satin and mirror finished 316 stainlees steel hardware.Tokyo Showroom - Japan
A Sugatsune global brand.
The original damped motion cabinet hardware.Main Factory - Chiba, Japan
Revolutionary flush-closing multiple sliding door system.
20090330
CERTIFICATIONS20090330
ISO 9001
* Registered for Global Headquarters Sugatsune Kogyo Co Ltd Sug gyo Co.,Ltd.
ISO 14001
* Registered for Global Headquarters Sugatsune Kogyo Co Ltd Sug gyo Co.,Ltd.
NSF
NSF International RECOGNIZES SUGATSUNE AMERICA, INC. CARSON,CA AS COMPLYING WITH NSF C2. PRODUCTS APPEARING IN THE NSF OFFICIAL LISTING ARE AUTHORIZED TO BEAR THE NSF MARK. SUGATSUNEs NSF Certified Products are designed to meet Food Equipment Industry Standard. SUGATSUNEs NSF Certified part numbers are subject to change without notice. When placing an order please specify NSF products.
LGA
Product Section of the Institute for Product Testing & Quality Supervision Approves Sugatsune Flap Holders. Sugatsunes Soft-Down Stays have received the LGA-Quality Certificate. After durability testing, no changes in product quality or serviceability were detected. LAPCON-DAMPER NSDX 30,000 cycles. SDS 30,000 cycles. HDS, HDSN 90,000 cycles. Furniture Testing Institute of the State Commercial Office of Bavaria Nuremberg, Germany.
ANSIMeets SPECS.
American National Standards Institute compliant. Sugatsunes hinges below meets ANSI standards specification. HES-3030BR (SC and PB) 3535 (PB and CR) 4040 (PB and CR) Please contact customer service for details.
CERTIFICATIONS / HOW TO USE THIS CATALOG
RoHS
SUGATSUNE has started changing products to comply with the European RoHS directive. Hexavalent Chromium is changed to either chromium free or trivalent chromium. Most of the stainless steel products do not contain Hexavalent Chromium. Please contact sales for RoHS compliant product information.
SEMI
SUGATSUNEs SEMI compliant products are designed to meet SEMI S8, a safety guideline for ergonomics engineering of semiconductor manufacturing equipment.
How to use this catalog
136
SLIDE BOLT
3.120
KR-50CATCHES & LATCHES
Item No. K R - 50
Weight (g) 80
Box (pcs) 20
Carton (pcs) 20 0
Material 304 Stainless Steel
Finish Satin
SLIDE BOLTS
SLIDE BOLT
3.120
KR-65
FeaturesLapconPatented products as Lapcon M4
NUTStainless Nut
SCREWStainless Screw
STAINLESS430 Stainless Steel
ALUMINUM
NSFNSF certied products
M4
NUTSteel Nut
SCREWSteel Screw
STAINLESS302 Stainless Steel
TITANIUM
SEMIProducts Compliant with Semi Guideline (SEMI S8)
M410 M414
SCREWStainless Screw with Size
NO SCREWNo Screw
STAINLESS303 Stainless Steel
ANSIMeets SPECS.
P ro d u c t s Te s t e d under ANSI standard
M530
SCREWSteel Screw with Size
NEODYMIUMStrong Magnet
STAINLESS304 Stainless Steel
Test method
DIMPLE KEY
STAINLESS316 Stainless Steel
Load Capacity
All items, unless specied, are made to exact metric dimensions. Changes in dimensions, nishes, and packing etc. or suspension of production may occur without notice. Our liability is limited to the replacement of the merchandise.
20090330
TEST METHODS About Test Methods Various values about products with Test logo, such as the load capacity, hanging load capacity, catch force and retaining force,
TEST METHODS
are determined by the tests performed by our company as described below. Values are to provide guidance for the safe use of our products. Product without Test logo may not be based on these criteria in some cases.
LOAD CAPACITY TEST (TEST 1)W Upward direction Installed surface, Regular plywood
LOAD CAPACITY TEST (TEST 2)
Frontal direction
Frontal direction
W
Installed surface, Regular plywood
W
Installed surface, Regular plywood
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure.
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. Product may fail or distort if the force is applied in a direction other than the frontal direction. Please do not use on application other than in the pull direction.
HANGING-LOAD CAPACITY TEST (TEST 3)Min. 20mm Installation screw Hanger Plate Regular plywood Vertical direction Installed surface, Regular plywood Provided screws (2 locations)
HANGING-LOAD CAPACITY TEST (TEST 4)Center Center
W Vertical direction
Installed surface, Regular plywood
W Vertical direction
Installed surface, Regular plywood
W
The hanging-load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. This value will vary according to the diameter / length of the screw(s) used and strength of the installed surface. Hanging load of 10kg (22 lbs), in case of using round-head wood screw 3.8 x 25.
The hanging-load capacity is measured when the force (W) is gently applied at the center of the product in the direction of the arrow under the condition indicated by the figure.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
TEST METHODS MAXIMUM HANGING-LOAD TEST (TEST 5)Installed surface, Regular plywood Center
LOAD CAPACITY TEST (TEST 6)Length L1 /3 L
TEST METHODS
Vertical directionW
Operational direction
W
The maximum hanging-load capacity is measured when the force (W) is gently applied in the direction of the arrow and operated under the condition indicated by the figure. If the load is concentrated at the front tip of the hanger, the front tip may sag or the movement may become heavy.
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. (This is based on the force (W) applied at the center of the shelf board with its length 4/3 times longer than the shelf bracket or angle bracket.)
LOAD CAPACITY TEST (TEST 7)
CLAMPING FORCE TEST UNDER STANDARD INSTALLATION (TEST 8)
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure.
The capacity of the clamping force under standard installation is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure, and when the shaded portion begins to slide.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
TEST METHODS LOAD CAPACITY TEST (TEST 9) CATCH FORCE TEST (TEST 10)
TEST METHODS20090330
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. Follow the conditions below to prevent the shelf bracket or shelf board from falling off. 1: The total gap between the shelf board and side board shall be 1mm or less. 2: Use shelf board which has sufficient durability.
The catch force is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. Note: Misalignment of the male and female parts may cause the catch force to decrease or parts failure.
RETAINING FORCE TEST (TEST 11)
LOAD CAPACITY TEST (TEST 12)
The retaining force is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. Note: Latch and strike must be engaged at least 2/3L or more. (See the figure.)
The load capacity is measured when the force (W) is applied in the direction of the arrow under the condition indicated in the figure. Product may break or distort if the contact surface is not flat.
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
TEST METHODS LOAD CAPACITY OF CASTER (TEST 13)The load capacity is based on a flat steel floor surface. Following is the safety factor which should be taken into consideration in case of using four casters:
PULL LOAD TEST (TEST 14)
TEST METHODS
Proper load kg (lbs) = Load capacity value kg (lbs) x 4 (each) x 0.75 The safety factor will vary depending on the conditions of use such as the rolling surface, rolling speed, etc. When using under adverse conditions, please test the casters in the intended application.
The pull load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure.
COMPRESSION LOAD TEST (TEST 15)
PERMISSIBLE LOAD OF FASTENER (TEST 16)The permissible load is based on the following safety factor: Permissible load kg (lbs) = Ultimate Load 3 The safety factor will vary depending on the conditions of use. When used under adverse conditions, please test the fastener in intended application.
The compression load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure.
HOOK LOAD CAPACITY TEST (TEST 17)
The load capacity is measured when the force (W) is gently applied in the direction of the arrow under the condition indicated by the figure. The load capacity is based on the following safety factor: Load capacity kg (lbs) = Ultimate Load 3 However, the safety factor will vary depending on the conditions of use. When used under adverse conditions, please test the hook in intended application.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
MATERIALSMaterial Type Characteristics 18% Chromium (Cr) added to steel. Commonly used because of its excellent formability and cost performance. Low corrosion resistance compared to 304 grade. Most common grade which contains 18% chromium and 8% nickel, also called 18/8 stainless steel. Low carbon content, excellent formability and weldability with good corrosion resistance. Nickel (Ni) and Molybdenum (Mo) added to maximize corrosion resistance. Better acid and pitting resistance than 304 grade. Also has high strength at high temperature. This is an alloy having zinc (Zn) as main component along with other materials such as aluminum (Al), copper (Cu), magnesium (Mg), iron (Fe), etc. This alloy is widely used along with aluminum alloy for die-casting. Zinc alloy facilitates the manufacturing of product with high dimensional accuracy, beautiful cast surface, and it can be plated for superior corrosion resistance. Zinc Alloy also has superior mechanical characteristics such as high tensile strength, compressive strength, hardness, bend (flexural) strength, modulus of elasticity, etc. Also zinc alloy can be plated with good corrosion resistance. This is an alloy having aluminum (Al) as a main component along with other materials such as copper (Cu), silicon (Si), iron (Fe), magnesium (Mg), zinc (Zn), etc. Aluminum alloy is the most widely used material today for die-casting. This alloy facilitates the manufacturing of lightweight product having appropriate mechanical characteristics and corrosion resistance. Also it has good physical characteristics such as fine thermal conductivity, and also the characteristics do not change at low temperature. Brass is an alloy having copper (Cu) and zinc (Zn) as the main components. It has yellow (or golden) color and good cutting characteristics. This alloy is easy to fabricate and is often used for the body of locks, hinges, handles, etc.
MATERIALS20090330
430 Stainless Steel
Ferretic
304 Stainless Steel
Austenitic
316 Stainless Steel
Austenitic
Zinc Alloy
-
Aluminum Alloy
-
Brass
-
Material ABS Resin
Acronym ABS
Characteristics Thermal plastic developed to enhance the impact resistance of polystyrene. ABS can be plated. Very resistant to wear and abrasion suitable for parts like gears and bearings. Also has good chemical and oil resistance. Strong against organic solvent. Difficult for adhesion and painting. Resistant to bending stress ideal for bending applications.
Polyamide
PA
Polypropylene
PP
Polyacetal
POM
Superior abrasion resistance. Good tensile/bending strength and elasticity.
Polyethlene
PE
Low material cost. Excellent formability usable for various application. Has very low water absorption rate, suitable for water resistant purpose. High impact resistance and good dimensional stability for high precision. Also has high transparency.
Polycarbonate
PC
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
SURFACE TREATMENTName Zinc Plating Characteristics Zinc plating is commonly used on steel to prevent oxidation. Chromate is generally applied over zinc to enhance corrosion resistance. Major coating mainly applied on parts after zinc plated or cadmium plated. Parts are immersed in a solution mainly consisting of chromic acid or heavy chromic acid to create the coating. This is used to improve corrosion resistance and appearance of metals, metal coloration, and is also used as a pretreatment for painting. Various chromate coatings are developed such as yellow chromate (rainbow color), clear chromate, black chromate, green chromate, etc. Common electroplating for various industrial purposes. Reflective finish can be achieved by polishing. High hardness and good corrosion resistance along with thermal resistance, abrasion resistance and good adhesion characteristics. Generally used as final finish for various decorative parts and products due to its uniquely deep coloration. Nickel is commonly used for decorative and anti-corrosion purpose because of its stability against air or humidity compared to iron. However, since the surface of the nickel plating will slightly discolor through exposure to air, chrome is often used after nickel to keep the finish/color. Nickel plating has moderate hardness / corrosion-resistance and widely used on industrial application. Also called the anodic oxidation film processing. This process thickens and toughens natural oxide layer on metal, commonly applied to aluminum for corrosion resistance and dyeing. In aluminum anodizing, aluminum object serves as the anode (the positive electrode) when electrolyzed in the sulfuric acid. This will create a layer of porous oxide film which has high electric insulation and abrasion resistance. The film is normally transparent when it is thin, although it becomes dull as the thickness increases. The pores produced by anodizing are closed by a process called sealing, which is done by highpressurized or boiling-hot deionized water. This process fills the pores and creates a thin layer that is corrosion resistant, suitable for various aluminum parts / products.
SURFACE TREATMENT
Chromate Conversion Coating
Chrome Plating
Nickel Plating
Alumite or Anodizing (Anodic Oxidation Film Processing)
* Hexavalent-Chromium (CR6) Free Sugatsune is strictly controlling the use of chemicals that would adversely impact the environment. We are designing and developing products with minimum use of materials which has adverse environmental impact. Hexavalent chromium compound is especially known for its adverse effects on the human body. We are eagerly substituting this Hexavalentchromium (CR6) with the less toxic substance Trivalent-chromium (CR3).
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
Zwei L
P. 1~
CONTENTS
Zwei L KNOBS & HANDLES Zwei L PULLS Zwei L HOOKS Zwei L GLASS SHELF CLAMPSHANDLES, PULLS & KNOBS
Zwei L DOOR LATCH & HANDLES Zwei L HINGES Zwei L DOOR STOPPERS Zwei L LEVER BOLTSP. 40~
HANDLES RECESSED PULLS PULLS KNOBSCATCHES & LATCHES
HATCH PULLS PUSH KNOBS DRAW LATCHES
P. 88~
KNUCKLE CATCHES TENSION CATCHES MAGNETIC CATCHES NON-MAGNETIC TOUCH LATCHESHINGES
PUSH KNOB LATCHES DRAW LATCHES SLIDE BOLTS HASPP. 154~
BUTT HINGES CLEAN ROOM HINGES LIFT-OFF HINGES QUICK RELEASE HINGESLID SUPPORTS
ANGLE, PIVOT & TABLETOP HINGES DETENT HINGES TORQUE & DAMPER HINGES CONCEALED HINGES
P. 214~
SOFT-DOWN STAY VERTICAL SWING LIFT-UP MECHANISM HORIZONTAL BI-FOLD DOOR MECHANISM SOFT CLOSING SYSTEMDRAWER SLIDES
LID STAYS MULTI ANGLE LID STAYS SPRING LOADED LID STAYS DOOR HOLDERSP. 266~
STAINLESS STEEL DRAWER SLIDE ALUMINUM DRAWER SLIDE STEEL DRAWER SLIDE
BRACKETS & HOOKS
P. 298~
ANGLE BRACKETS FOLDING BRACKETS SHELF SUPPORTS & STANDARDS HOOKS
RECESSED HOOKS FRAME HANGERS
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
WARDROBE HARDWARE
P. 340~
CONTENTS
CLOSET ROD LIFT MECHANISM EXTENSION HANGERS SWINGING HANGERSSLIDING & FOLDING DOOR HARDWAREP. 352~ MULTIPLE MOTION DOOR SYSTEM FLUSH SLIDING DOOR SYSTEM LATERAL OPENING DOOR SYSTEM
SLIDING DOOR HARDWARE SWING DOOR HARDWARE FOLDING DOOR HARDWARE FLUSH SLIDING DOOR HARDWAREGLASS HARDWARE
P. 432~
GLASS DOOR HINGES GLASS DOOR LOCKS POINTFIX GLASS CLAMPSSHELVING SYSTEM
GLASS SHELF SUPPORTS SHOWER ROOM HARDWARE GLASS SLIDING DOOR HARDWAREP. 458~
UNIT SHELF SYSTEM LEVEL ADJUSTABLE SHELVING SYSTEM WALL SHELVING SYSTEMLAVATORY HARDWAREP. 488~
PARTITION PANEL FITTINGS BABY HOLDING BEDS DRESSING STAGE MIRROR SUPPORTSCASTERS & LEVELING GLIDESP. 504~
TWIN WHEEL CASTERS DUAL BRAKE SYSTEM CASTERS SHOCK-ABSORBING CASTERSLOCKS
CASTER WITH LEVELING GLIDES LEVELING GLIDES SELF ADJUSTING LEVELING GLIDES
P. 536
MILLION LOCKS CABINET LOCKS
PUSH LOCKS MINI CAM LOCKS
MISCELLANEOUS
P. 564~
DOOR STOPPERS DOOR HOLDERS VENTILATORS CABLE GROMMETS
MULTI PURPOSE LIDS DOOR CLOSERS LED LIGHTS
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
20090330
20090330
20090330
20090330
20090330
20090330
20090330
20090330
20090330
Zwei L represents the very pinnacle of ultra-premium Japanese hardware design. Contrasting bands of mirror finish and lustrous satin on a faceted profile give jewel like highlights which flatter any architectural space. Manufactured from solid billets of the finest quality 316 stainless steel, Zwei L communicates luxury and quality in the hand and dazzles the eye. Zwei L was conceived as a coherently designed range where each piece reflects and complements the others. Zwei L- a timeless classic at the leading edge of design.
www.ZweiL.com
20090330
3
ZL-1503PAT. P
ZL-1801PAT
ZL-1701
ZL-1101 PAT
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
4
ZL-2201 PAT ZL-1502
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
5
KnobThe essence of Zwei L, a small but crystalline accent distinguishing and unifying your design.
Material: 316 Stainless Steel Drawing: P.17
ZL-1901PATW16H24D32
ZL-1902 PATW16H37D36
ZL-1903 PATW16H51D32
ZL-1904 PATW10H18D28
ZL-1905 PATW10H27D27
ZL-190620D20 36D32 28D26
ZL-1907 PATW40H16D20
Plate/Screw SetComplete the coordinated look of cabinets. Material: 316 Stainless Steel Drawing: P.18
*Combination example. Handle sold separately.
ZL-2302-191616 (For Knob)
ZL-2302-192525 (For Knob)
ZL-2301-201616 (For Handle)
ZL-2301-202525 (For Handle)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
6
HandleMaterial: 316 Stainless Steel .19 Drawing: P The contrast of mirror and Satin nish combined in smooth design.
ZL-2001L 38H35W10 L102H35W10 L166H35W10 L262H35W10 L 70H35W10 L134H35W10 L198H35W10
10 6
ZL-2002L106H45W16 L170H45W16 L266H45W16 L138H45W16 L202H45W16 L330H45W16
16 10
Recessed Pull PullMaterial: 316 Stainless Steel Drawing: P.19 Simple form with stunning nish.
ZL-250156D16 80D16.5 125D20
ZL-2503 PATW121H25D16 W185H25D16
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
7
Push Knob Push LatchFlush knobs that tuck out of the way but still catch the light and the eye.
Material : Push Knob (316 Stainless Steel) : Case (Zinc Alloy/ABS) Drawing : P.20
ZL-190832
ZL-290132
HookBeautiful contemporary lines, three styles of hook one bold visual statement. Material: 316 Stainless Steel Drawing: P.21
ZL-2103 PAT56H63D72
ZL-2101 PAT56H70D80
ZL-2102 PAT56D79
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
8
Shelf ClampGlass, steel, light - a symphony of reections.
Material: 316 Stainless Steel Drawing: P.22
ZL-2201PAT56D150 56D270 56D210
ZL-2201 Application Example
ZL-2202 PAT56D48
ZL-2202 Application Example
ZL-2203 PAT56D68
ZL-2203 Application Example
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
9
Case LatchUnmistakable quality in the hand as light breaks across the shimmering surfaces.
Material: 316 Stainless Steel Drawing: P.23~P.24
ZL-1601PATW96H96D32
ZL-1101PATW15056D68 See P.13
ZL-1102 PATW14856D68 See P.13 See P.13
ZL-1103 PATW14856D68
Material: 316 Stainless Steel Drawing: P.23~P.24
Glass HingeExquisitely engineered glass door hinges.
ZL-1702PATW122H144D34
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
10
Door KnobRestrained beauty - a ash of light to complement wooden and glass doors.
Material: 316 Stainless Steel Drawing: P.25~P.26
ZL-150350D40
ZL-1504 PATW73H25D32
ZL-1505 PATW25H185D16 W25H345D16
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
11
HingeRuggedly functional with crisp details that sparkle. Material: 316 Stainless Steel Drawing: P .27
ZL-1702 See P.23
ZL-1701W104H14420
Glass ClampThe beauty of glass is enhanced with these gemlike Zwei L point xes or stand os. Material: 316 Stainless Steel Drawing: P .28
Glass HingeFor glass doors that open either way a stunning satin and mirror nish hinge. Material: 316 Stainless Steel Drawing: P.28
ZL-280125 40
ZL-1703W105H144D96
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
12
Door HandleStrong vertical lines with brilliant highlights add denition to architectural space.
Material: 316 Stainless Steel Drawing: P.29 ~ P.32
ZL-1501L 345H84.5W40 L 665H84.5W40 L 985H84.5W40 L1305H84.5W40 L1625H84.5W40 L1945H84.5W40 Special order
40 25
ZL-1502L208H6856 L656H6856 L336H6856 L976H6856
25 16
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
13
Lever handle
Material: 316 Stainless Steel Drawing: P.33 ~ P.34
Mirror polished surfaces that reect dark and light combine with the sheen of satin. Reassuringly solid in the hand.
ZL-1101PATW15056D68
ZL-1102 PATW14856D68
ZL-1103 PATW14856D64
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
14
Escutcheon Indicator Thumbturn for prole cylinderPerfect details for unifying a design with the Zwei L touch.
ZL-1202 (Escutcheon) 56 (Material:316 Stainless Steel)
ZL-1302
(Indicator) 56 (Material:316, 304 Stainless Steel/Brass/Plastic)
ZL-1402
(Thumbturn) 56 (Material:316 Stainless Steel/Brass/Plastic)
ZL-1403
(Thumbturn knob) 32 (Material:316 Stainless Steel)
*Prole cylinder sold separately.
Door StopperSimple yet perfectly proportioned - ideal for nishing a Zwei L equipped door.
Material: 316 Stainless Steel Drawing: P.35
ZL-1801 Floor Mount Type48H48
ZL-1802 PAT Wall Mount Type56H72 56H96
ZL-1803 PAT Floor Mount TypeW48H60D56
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
15
Lever BoltSleek latch design brings Zwei L to cabinet hardware. Material: 316 Stainless Steel Drawing: P .36
ZL-2401PATW148H56
Lever BoltYou can feel the quality as you turn this lever bolt. Material: 316 Stainless Steel Contact customer service for Drawing.
ZL-2402PATW9696
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
16
Mirror SupportThe icy white sparkles of Zwei L supports set o mirrors on open walls.
Material: 316 Stainless Steel Drawing: P.37
ZL-310240D16
ZL-3101 PATW280D16
Towel BarSolid 316 stainless steel towel bars - glittering quality, eortless style. Material: 316 Stainless Steel Drawing: P .37 Material: 316 Stainless Steel Drawing: P.37
ZL-3202W53656D77 W69656D77
ZL-3201 PATW74H154D480
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
17
ZL-1901
ZL-1902
Item No. ZL-1901
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 34
Box (pcs) 8
Item No. ZL-1902
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 52
Box (pcs) 8
Anti-rotation pin is detachable. Supplied with stainless steel screws (M4 x 25)
Anti-rotation pin is detachable. Supplied with stainless steel screws (M4 x 25)
ZL-1903
ZL-1904
Item No. ZL-1903
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 58
Box (pcs) 8
Item No. ZL-1904
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 12
Box (pcs) 8
Supplied with stainless steel screws (M4 x 25)
Anti-rotation pin is detachable. Supplied with stainless steel screws (M4 x 25)
ZL-1905
ZL-1906
Item No. ZL-1906-20 Item No. ZL-1905 Material 316 Stainless Steel Finish / Color Zwei L Weight (g) 15 Box (pcs) 8 ZL-1906-28 ZL-1906-36
Material 316 Stainless Steel
Finish / Color Zwei L
H 20 26 32
D 20 28 36
D1 16 22.5 28
P 5 8 10
Weight (g) Box (pcs) 32 83 165 4 2 1
Anti-rotation pin is detachable. Supplied with stainless steel screws (M4 x 25)
Anti-rotation pin is detachable. Supplied with stainless steel screws (M4 x 30) Back-to-back type ZL-1503 available. (P.25)
ZL-1907
Item No. ZL-1907
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 78
Box (pcs) 2
Supplied with stainless steel screws (M4 x 30) Back-to-back type ZL-1504 available. (P.25)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
18
ZL-2302-1916, ZL-2302-1925, ZL-2301-2016, ZL-2301-2025 ( For glass up to 10mm )
Screw M416
Screw M516
Base Plate (16)
Base Plate (25)
Plate/Screw Set for ZL-1904, ZL-1905 Knob (16)Item No. ZL-2302-1916 Part Name Screw (M416) Base Plate (16) Gasket (14) Material Stainless Steel 316 Stainless Steel Elastomer Finish / Color Zwei L Zwei L Plain Box (pcs) 1 1 2
*2 gaskets included
Plate/Screw Set for ZL-1901, ZL-1902, ZL-1903 Knob (25)Item No. Part Name Screw (M416) ZL-2302-1925 Base Plate (25) Gasket (14) Gasket (20) Material Stainless Steel 316 Stainless Steel Elastomer Elastomer Finish / Color Zwei L Zwei L Plain Plain Box (pcs) 1 1 1 1
Plate/Screw Set for ZL-2001 Handle (16)Item No. ZL-2301-2016 Part Name Screw (M416) Base Plate (16) Gasket (14) Material Stainless Steel 316 Stainless Steel Elastomer Finish / Color Zwei L Zwei L Plain Box (pcs) 2 2 2
*2 each of screws, base plates, and 4 gaskets included
Plate/Screw Set for ZL-2002 Handle (25)Item No. Part Name Screw (M516) ZL-2301-2025 Base Plate (25) Gasket (14) Gasket (20) Material Stainless Steel 316 Stainless Steel Elastomer Elastomer Finish / Color Zwei L Zwei L Plain Plain
*2 pieces each included
Gasket
DimensionsPart Name Gasket (14) Gasket (20) A 14 20 B 5 6
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
19
ZL-2001
ZL-2002
Item No. ZL-2001- 32 ZL-2001- 64 ZL-2001- 96 ZL-2001-128 ZL-2001-160 ZL-2001-192 ZL-2001-256
Material
Finish / Color
L 38 70 102
C 32 (1-17/64") 64 (2-33/64") 96 (3-25/32")
Weight (g) 34 46 59 72 86 100 125
Box (pcs) 20 12 12 10 Item No. ZL-2002- 96 ZL-2002- 128 ZL-2002- 160 Material Finish L 106 C 96 (3-25/32") Weight (g) 165 194 233 265 332 395 Box (pcs) 12 12 12 6 6 6
316 Stainless Steel
138 128 (5-1/32")
Zwei L
134 128 (5- 1/32") 166 160 (6-10/64") 198 192 (7- 9/16") 262 256 (10-5/64")
170 160 (6-10/64") 316 Zwei L ZL-2002- 192 Stainless Steel 202 192 (7-9/16") ZL-2002- 256 ZL-2002- 320 266 256 (10-5/64") 330 320 (12-19/32")
Supplied with stainless steel screws (M4 x 30)
Supplied with stainless steel screws (M5 x 30)
ZL-2501
ZL-2503
Bore Dimension
No.
Part Name Pull
Material 316 Stainless Steel
Finish / Color Zwei L Plain G H 15 15 17 Weight (g) Box (pcs) 1 1 1 Item No. ZL-2503- 96 Material Finish L C Weight (g) Box (pcs) -
Mounting Bracket 316 Stainless Steel A B 47 70 112 C D E F
Item No.
ZL-2501-56 32 ZL-2501-80 50 ZL-2501-125 80
56 14 80 14 125 16
3.2 16 40 4 16.5 62 5 20 100
121 96 (3-25/32") 316 Zwei L ZL-2503- 160 Stainless Steel 185 160 (6-10/64") Supplied with stainless steel screws (M4 x 30) Back-to-back type ZL-1505 available. (P.26)
Supplied with stainless steel wood screws (3.1 x 16)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
20
ZL-1908
Bore Dimension
Item No. ZL-1908
No.
Part Name Push Knob (Base Included) Body Case
Material 316 Stainless Steel ABS Zinc Alloy, ABS
Finish / Color Zwei L Black Black
Door Thickness (t) 13~23mm (33/64"~29/32") 24~33mm (61/64"~1-19/64")
Bore Depth (H) 0 Door Thickness-23
Supplied with stainless steel screw.
ZL-2901
Bore Dimension
Item No.
No.
Part Name Push Knob (Base Included) Latch Body Latch Counterplate Case
Material 316 Stainless Steel ABS Polyacetal ABS Zinc Alloy, ABS
Finish / Color Zwei L Black Black Black Black
ZL-2901
Door Thickness (t) 13~23mm (33/64"~29/32")
Bore Depth (H) Door Thickness-13
Supplied with stainless steel screws.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
21
ZL-2103
No. Item No. ZL-2103 Load Capacity (kg) Weight (g) Box (pcs) 1
Part Name Hook Cover Pin Base Plate Cap Screws
Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Silicone Rubber 316 Stainless Steel
Finish / Color Zwei L Zwei L Zwei L Plain Clear Plain
Supplied with stainless steel wood screws (4.1 x 32), anchor plug and 3mm allen key.
ZL-2101
ZL-2102
Item No.
Material
Finish / Color Zwei L
Load Capacity (kg) 37(81lbs)
Weight (g) 381
Box (pcs) 1
Item No. ZL-2102
Material 316 Stainless Steel
Finish / Color Zwei L
Load Capacity (kg) 30(66lbs)
Weight (g) 221
Box (pcs) 1
ZL-2101 316 Stainless Steel
Supplied with stainless steel wood screws (4.1 x 32) and concrete anchor (for wood screw 4.1, 6mm hole)
Supplied with stainless steel wood screws (4.1 x 32) and concrete anchor (for wood screw 4.1, 6mm hole)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
22
ZL-2201
ZL-2202
Glass Dimensions (Per 2 Clamps) t D W 150 Max.640 ZL-2201-120 120 (5-29/32") (25-3/16") Max.800 8 or 10 210 180 ZL-2201-180 (31-1/2") (8-17/64") (5/16" or 25/64") Max.960 270 240 ZL-2201-240 (37-13/16") (10-5/8") Item No. A No. Part Name Shelf Holder Base Plate Level Adjuster Bumper Material 316 Stainless Steel 316 Stainless Steel316 Stainless Steel / Polyurethane
Weight (g) Box (pcs) 293 403 438 Finish / Color Zwei L Zwei L Zwei L / Clear Black 2 2 2 Item No. ZL-2202 Glass Dimensions (Per 2 Clamps) t D W 8 or 10 Max.160 Max.480 (5/16" or 25/64") (6-19/64") (18-7/8") Part Name Shelf Holder Base Plate Bumper Plate Bumper Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Synthetic Rubber Weight (g) Box (pcs) 119 2
No.
Finish / Color Zwei L Zwei L Zwei L Black
Synthetic Rubber
Supplied with stainless steel Hex Socket Cap Screw (M8 x 55), concrete anchor (for M8, 14mm hole) and 8mm allen key Note: Tempered glass recommended.
Supplied with stainless steel wood screw (4.1 x 32) and concrete anchor (for wood screw 4.1, 6mm hole) Note: Tempered glass recommended.
ZL-2203
Item No. ZL-2203 No. Supplied with stainless steel Hex Socket Cap Screw (M8 x 55), concrete anchor (for M8, 14mm hole) and 8mm allen key Note: Tempered glass recommended.
Glass Dimensions (Per 2 Clamps) t D W 8 or 10 Max.240 Max.640 (5/16" or 25/64") (9-29/64") (25-3/16") Part Name Shelf Holder Base Plate Level Adjuster Bumper Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Synthetic Rubber Finish / Color Zwei L Zwei L Zwei L Black
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
23
ZL-1601
Item No. ZL-1601-1 ZL-1601-2
Material 316 Stainless Steel
Finish / Color Zwei L
Handing Right Hand Opening Away / Left Hand Opening Towards Left Hand Opening Away / Right Hand Opening Towards
Weight (g) 970 970
Box (pcs) 1 1
Supplied with stainless steel wood screw (3.5 x 22), stainless steel screw (M4 x 12) and allen key
ZL-1702
Item No. ZL-1702
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) Box (pcs) 806 2
Supplied with stainless steel wood screw (4.8 x 32) and stainless steel screw (M5 x 16)
Cut Out Dimensions for ZL-1601 and ZL-1702
Latch
Strike
Hinge
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
24
ZL-1601 / ZL-1702 Installation(Right hand opening towards is shown.)
On Metal Frame
On Wooden Frame
*Use ZL-1601-1 for Right Hand Opening Away / Left Hand Opening Towards.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
25
ZL-1503
Cut Out Dimension for Glass Door
Bore Dimension for Wooden/Metal Frame Door
Door Thickness (t) -Wooden / Metal Frame Door: 8~35mm (5/16"~1-3/8") -Glass Door: 6~12mm (15/64"~15/32") *Back-to-Back type includes 2 knobs, screw set and allen key Item No. ZL-1503-IS-50 ZL-1503-OS-50 ZL-1503-WN-50 Type Interior Knob Exterior Knob Back-to-Back Knob 316 Stainless Steel Zwei L Material Finish/Color Weight (g) Box (pcs) 480 507 1 1 -
ZL-1504
Hole Preparation (d)
Door Thickness (t) -Wooden / Metal Frame Door: 8~33mm (5/16"~1-19/64") -Glass Door: 6~12mm (15/64"~15/32") *Back-to-Back type includes 2 knobs, screw set and allen key Item No. ZL-1504-IS-48 ZL-1504-OS-48 ZL-1504-WN-48 Type Interior Knob Exterior Knob Back-to-Back Knob 316 Stainless Steel Zwei L Material Finish / Color
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
26
ZL-1505
Hole Preparation (d)
Door Thickness (t) -Wooden / Metal Frame Door: 40~46mm (1-9/16"~1-13/16") -Glass Door: 8~12mm (5/16"~15/32") *Back-to-Back type includes 2 knobs, screw set and allen key. Item No. ZL-1505-IS-160 ZL-1505-OS-160 ZL-1505-WN-160 Item No. ZL-1505-IS-320 ZL-1505-OS-320 ZL-1505-WN-320 No. Type Interior Knob Exterior Knob Back-to-Back Knob Type Interior Knob Exterior Knob Back-to-Back Knob Part Name ZL-1505-OS (Exterior) ZL-1505-IS (Interior) ZL-1505 Gasket ZL-1702 Rubber Ring ZL-1505 Bracket ZL-1504 Washer A 160 (6-19/64") 160 (6-19/64") 160 (6-19/64") A 320 (12-19/32") 320 (12-19/32") 320 (12-19/32") Material 316 Stainless Steel 316 Stainless Steel Elastomer Chloroprene Rubber 316 Stainless Steel 316 Stainless Steel B 185 (7-9/32") 185 (7-9/32") 185 (7-9/32") B 345 (13-37/64") 345 (13-37/64") 345 (13-37/64")
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
27
ZL-1701, ZL-1701-10
Z L-1701
Z L-1701-10
Item No. ZL-1701 No.
Load Capacity (kg) 50 (110lbs) Part Name
Weight (g) 430 Material
Box (pcs) 8
Item No. ZL-1701-10
No.
Part Name Door Side Hinge Plate Frame Side Hinge Plate Head Cap
Material 316 Stainless Steel
Finish / Color Zwei L
Finish / Color Zwei L Zwei L Plain Satin Zwei L Plain
Door Side Hinge Plate Frame Side Hinge Plate Pin Washer Head Cap Spacer
316 Stainless Steel 304 Stainless Steel 316 Stainless Steel
Supplied with stainless steel wood screws (4.1 x 38) and stainless steel screws (M5 x 16, 8 Head)
Supplied with stainless steel wood screws (4.8 x 32) and stainless steel screws (M5 x 16, 9 Head)
Installation on Wooden Door
Installation on Metal Door
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
28
ZL-2801-25
ZL-2801-40
Item No.
No.
Part Name Pin Clamp Cover Spacer
Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Polyacetal
Finish / Color Plain Partly Polished Zwei L Black
Item No.
No.
Part Name Pin Clamp Cover Spacer
Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Polyacetal
Finish / Color Plain Partly Polished Zwei L Black
ZL-2801-25
ZL-2801-40
Note: Tempered glass recommended.
Note: Tempered glass recommended.
ZL-1703
Cut out Dimension
Item No. ZL-1703
Load Capacity (kg) / pair 65 (143lbs) Material
Weight (g) -
Box (pcs) 1 Finish / Color Zwei L Zwei L Zwei L Black
Part Name Bracket Face Plate Bracket Cover Gasket
316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Synthetic Rubber
Supplied with stainless steel screws (6.2x56), anchor plug and two allen keys (2.5 and 4mm)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
29
ZL-1501
ZL-1501-IS (Interior)
ZL-1501-OS (Exterior)
Combination with ZL-1501-R (Base Plate)
A-A View
Exterior ZL-1501-OS- 320 ZL-1501-OS- 640 ZL-1501-OS- 960 ZL-1501-OS-1280 ZL-1501-OS-1600 ZL-1501-OS-1920
Interior
Item No. Back-to-Back ZL-1501-WN- 320 ZL-1501-WN- 640 ZL-1501-WN- 960 ZL-1501-WN- 1280 ZL-1501-WN- 1600 ZL-1501-WN- 1920
Back-to-Back with Base ZL-1501-WR- 320 ZL-1501-WR- 640 ZL-1501-WR- 960
Material
Finish / Color
C 320 (12-19/32") 640 (25-13/64") 960 (37-51/64") 1280 (50-25/64") 1600 (62-63/64") 1920 (75-19/32")
Dimensions L1 345 (13-37/64") 665 (26-3/16") 985 (38-25/32") 1305 (51-3/8") 1625 (63-31/32") 1945 (76-37/64")
L2 384 704 1024 1344 1664 1984
ZL-1501-IS- 320 ZL-1501-IS- 640 ZL-1501-IS- 960 ZL-1501-IS-1280 ZL-1501-IS-1600 ZL-1501-IS-1920
316 ZL-1501-WR- 1280 Stainless Steel ZL-1501-WR- 1600 ZL-1501-WR- 1920
Zwei L
Can be installed on Glass Door, Wooden or Metal Frame Door. Tolerance of screw pitch is 1mm. Only ZL-1501-WR comes with base (ZL1501-R). Order base ZL1501-R separately if base plate needed for Exterior or Interior type. *Lengths over 960 are special order item.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
30
Working Diagram
Door Thickness (mm)
Door Hole (mm)
Item No.
Back-to-Back on Glass Door
With Base Plate
6 ~ 16 (15/64"~5/8")
16 (5/8")
ZL-1501-WR
With Base Plate
25 ~ 45 (63/64"~1-49/64")
9 (23/64")
ZL-1501-WR
Back-to-Back on Wooden / Metal Frame Door
Without Base Plate
37 ~ 57 (1-29/64"~2-1/4")
9 (23/64")
ZL-1501-WN
9 (23/64")
ZL-1501-OS ZL-1501-R
With Base Plate
-
ZL-1501-IS ZL-1501-R
Screws not included Single use on Wooden / Metal Frame Door Base Plate (ZL-1501-R) sold separately 9 (23/64")
ZL-1501-OS
Without Base Plate
-
ZL-1501-IS
*Please use a longer bolt when door thickness exceeds applicable door thickness. (Not included)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
31
ZL-1502 ZL-1502-OS (Exterior)
ZL-1502-IS (Interior)
A-A View
B-B View
Exterior ZL-1502-OS-192 ZL-1502-OS-320 ZL-1502-OS-640 ZL-1502-OS-960
Item No. Interior ZL-1502-IS-192 ZL-1502-IS-320 ZL-1502-IS-640 ZL-1502-IS-960
Back-to-Back ZL-1502-WR-192 ZL-1502-WR-320 ZL-1502-WR-640 ZL-1502-WR-960
Material
Finish / Color
C 192 (7-9/16") 320 (12-19/32") 640 (25-13/64") 960 (37-51/64")
Dimensions L1 208 (8-3/16") 336 (13-15/64") 656 (25-53/64") 976 (38-27/64")
L2 248 376 696 1016
316 Stainless Steel
Zwei L
Can be installed on Glass Door and Wooden / Metal Frame Door. Tolerance of screw pitch is 1mm. Base Plate included
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
32
Working Diagram
Door Thickness (mm)
Door Hole (mm)
Item No.
Back-to-Back on Glass Door
With Base Plate
6 ~ 12 (15/64"~15/32")
12 (15/32")
ZL-1502-WR
With Base Plate
40 ~ 52 (1-37/64"~2-15/32")
7 (9/32")
ZL-1502-WR
Back-to-Back on Wooden / Metal Frame Door
Without Base Plate
38 ~ 50 (1-1/2"~1-31/32")
7 (9/32")
ZL-1502-WR
-
ZL-1502-OS
With Base Plate
7 (9/32")
ZL-1502-OS
Screws not included Single use on Wooden / Metal Frame Door Base Plate (ZL-1501-R) sold separately ZL-1502-IS
7 (9/32")
ZL-1502-OS
Without Base Plate
-
ZL-1502-IS
*Please use a longer bolt when Door Thickness exceeds applicable Door Thickness. (Not included)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
33
ZL-1101
Item No. ZL-1101
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 1205
Box (pcs) 1
Non-Handed. *Please contact customer service for information about lock set
ZL-1102
Item No. ZL-1102
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 1133
Box (pcs) 1
Non-Handed. *Please contact customer service for information about lock set
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
34
ZL-1103
Item No. ZL-1103
Material 316 Stainless Steel
Finish / Color Zwei L
Weight (g) 1751
Box (pcs) 1
Non-Handed. *Please contact customer service for information about lock set
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
35
ZL-1801
Concrete, Tile, Brick Floor Installation
Wood Floor Installation
Item No. ZL-1801 No. Part Name Body Bumper Base
Weight (g) 381 Material 316 Stainless Steel Synthetic Rubber 316 Stainless Steel
Box (pcs) 1 Finish Zwei L Black Plain
Supplied with stainless steel hex. bolt (M8 x 75), concrete anchor (for M8, 14mm hole), stainless steel carriage bolt (M8 x 50) and allen key
ZL-1802
Item No. ZL-1802-72 ZL-1802-96 No.
L 72 (2-53/64") 96 (3-25/32")
Weight (g) 360 474 Material 316 Stainless Steel Synthetic Rubber
Box (pcs) 1 1 Finish / Color Zwei L Black
Part Name Body Bumper
Supplied with stainless steel wood screws (4.1 x 32) and concrete anchor (for wood screw 4.1, 6mm hole)
ZL-1803
Item No. ZL-1803 No. Part Name Body Bumper Base Bolt
Weight (g) Material 316 Stainless Steel Synthetic Rubber 316 Stainless Steel 316 Stainless Steel
Box (pcs) Finish Zwei L Black Plain Zwei L
Supplied with stainless steel wood screw (6.2 x 56), anchor plug and 4mm allen key.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
36
ZL-2401
No. Item No. ZL-2401 Weight (g) Box (pcs) 1
Part Name Body Knob Counterplate Counterplate
Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
Finish Zwei L Zwei L Zwei L Zwei L
Supplied with stainless steel wood screw (5x20, 4x20) and 2mm allen key.
ZL-2401-INR-GB (Indicator Unit for glass door)
ZL-2401-INR (Indicator Unit for wood door)
Item No. ZL-2401-INR-GB ZL-2401-INR
Door Material For Glass For Wood
Door Thickness(mm) 8~12 28~40
Weight (g) -
Box (pcs) 1 1
No.
Part Name Body Indicator Bracket
Material 316 Stainless Steel ABS 316 Stainless Steel
Finish Zwei L Red / Blue Zwei L
ZL-2401-INR-GB: Supplied with stainless steel screw (M5x14) and 4mm allen key. ZL-2401-INR: Supplied with stainless steel screw (M5x30) and 4mm allen key.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
37
ZL-3102-40
ZL-3101-200
Item No. ZL-3102-40
No.
Part Name Base Cover Spacer
Material 316 Stainless Steel 316 Stainless Steel EPDM Rubber
Finish / Color Zwei L Zwei L Black
Item No. ZL-3101-200
No.
Part Name Base Cover Spacer
Material 316 Stainless Steel 316 Stainless Steel EPDM Rubber
Finish / Color Zwei L Zwei L Black
Supplied with stainless steel wood screws (5.1 x 45), concrete anchor MIL T-12 (for 5, 8 x 35) and allen key
Supplied with stainless steel wood screws (5.1 x 45), concrete anchor MIL T-12 (for 5, 8 x 35) and allen key
ZL-3202
ZL-3201
Item No. ZL-3201 No. Item No. ZL-3202-480 ZL-3202-640 Material 316 Stainless Steel Finish / Color Zwei L A B C 536 ( 21-7/64" ) 696 ( 27-13/32" ) 480 490 640 650 Part Name Bracket Arm Pin Post Bushing Swivel Stopper Base Plate Cover
Weight (g) Material 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Polyacetal Polyacetal 316 Stainless Steel 316 Stainless Steel
Box (pcs) 1 Finish Zwei L Zwei L Mirror Zwei L Black Black Plain Zwei L
Supplied with stainless steel wood screws (4.1 x 25) and concrete anchor (for wood screw 4.1, 6mm hole)
Supplied with stainless steel wood screw (4.1x32), anchor plug and 3mm allen key.
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
38
KNOBS, HANDLES OVERVIEW
ZL-1901PATW16H24D32
ZL-1902 PATW16H37D36
ZL-1903 PATW16H51D32
ZL-1904 PATW10H18D28
ZL-1905 PATW10H27D27
ZL-1906 PAT.P20D20 36D32 28D26
ZL-1907 PAT.PW40H16D20
ZL-2001L 38H35W10 L102H35W10 L166H35W10 L262H35W10 L 70H35W10 L134H35W10 L198H35W10
10 6
ZL-2002L106H45W16 L170H45W16 L266H45W16 L138H45W16 L202H45W16 L330H45W16
16 10
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
20090330
20090330
(Tamazusa, Japanese - esteemed or precious)
Tamazusa ia a range of handles inspired by the art and architecture of the Momoyama period in Japanese history. When the C16th overlord Nobunaga Oda set about the bloody process of unifying Japan he built a fabulous castle near Kyoto. Until the Momoyama period Castles were gloomy military structures but Azuchi castle was a glittering celebration of power and art. The intention was to impress and intimidate and the fusion of art and architecture defined the era. Sugatsune has taken the delicate curves of the Momoyama period and fashioned a seres of opulent 24 carat gold plated handles and pulls that express the beauty of Momoyama in a contemporary voice.
20090330
42
HANDLE (GOLD PLATED)
M545
TMHHANDLES, PULLS & KNOBS
PAT
Without Base Plate Base Plate (Sold Separately)
Item No. TMH-M35 Item No. TMH- 96 TMH-128 TMH-160 TMH-192
Material Brass
Finish 24K Gold Plating C 96 128 160 192
Weight (g) 28 Weight (g) 259 280 301 320
Box (pcs) Carton (pcs) 2 20 Box (pcs) Carton (pcs)
HANDLES / PULLS
176 208 240 272
L ( 6-59/64" ( 8-3/16" ( 9-29/64" ( 10-45/64"
) ) ) )
1
10
Material Brass
Finish 24K Gold Plating (Body), Black Nickel (Ring)
PULL (GOLD PLATED)
M430
TMH
PAT
Item No. TMT-16 TMT-20
W 16 20
L 25 ( 63/64" ) 31.5 ( 15/64" )
D 12.5 16
H 20 25
Weight (g) Box (pcs) Carton (pcs) 31 1 10 64
Material Brass
Finish 24K Gold Plating
DOOR HANDLE (GOLD PLATED)30 102.5 Rubber Bumper/Black 136
M68
DTM-B
(Wooden Door)70
Connecting Bolt Outside Inside
200(380)
30
400(580) 120(300)
59.5
DOOR
Rubber Bumper138
Fixing Screw
1.5
Installation
25.5
79
Item No. DTM-B400GA DTM-B580GA
Size Small Large
Door Thickness (mm) 36-50 (Wood), 10-20 (Glass)
Mounting Hole 17
Box (pcs) 2 Material Brass Finish 24K Gold Plating (Body), Black Nickel (Ring)
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
43
HANDLEHANDLES, PULLS & KNOBS HANDLES20090330
M428
DL
Satin
MaterialMirror
Finish Mirror (M) Satin (S) Carton (pcs) 200
303 Stainless Steel L 70 90 110 130 150 C 2-33/64" ) 3-5/16" ) 4-3/32" ) 4-7/8" ) 5-43/64" ) H ( 29/64" ) ( 59/64" ) ( 15/16" ) ( 31/32" ) ( 63/64" ) B T S Weight (g) 44 55 65 75 86 Box (pcs) 20
Item No. DL- 70/M DL- 70/S DL- 90/M DL- 90/S DL-110/M DL-110/S DL-130/M DL-130/S DL-150/M DL-150/S
64 ( 84 ( 104 ( 124 ( 144 (
23 23.5 24 24.5 25
13
6
10
15
150
HANDLE
M328
DS
DS-90/M
DS-30/S
Material 303 Stainless Steel
Finish Mirror (M) Satin (S) Carton (pcs) 400 300 200
Item No. DS-30/M DS-30/S DS-50/M DS-50/S DS-70/M DS-70/S DS-90/M DS-90/S
L 30 50 70 90
25 ( 45 ( 65 ( 85 (
C 63/64" ) 1-25/32" ) 2-9/16" ) 3-11/32" )
23 22 22.5 23
H ( 29/32" ) ( 55/64" ) ( 57/64" ) ( 29/32" )
B
T
S 8 10
10
5
Weight (g) 15 22 28 35
Box (pcs) 40 30 20
HANDLE
M328
EC
Satin
Mirror
Material 303 Stainless Steel
Finish Mirror (M) Satin (S) Carton (pcs) 150 100
Item No. EC-100/M EC-100/S EC-120/M EC-120/S EC-150/M EC-150/S EC-180/M EC-180/S
L 100 120 150 180
92 ( 112 ( 142 ( 172 (
C 3-5/8" ) 4-13/32" ) 5-19/32" ) 6-25/32" )
32 34 36 37
H ( 1-17/64" ) ( 1-11/32" ) ( 1-27/64" ) ( 1-29/64" )
B
T
S 10 12
14
8
Weight (g) 102 120 148 174
Box (pcs) 15 10
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
44
HANDLE
M528
ECHHANDLES, PULLS & KNOBS
Satin
MaterialMirror
Finish Mirror (M) Satin (S) Carton (pcs) 100 150 100 70 100 50
303 Stainless Steel L 83 108 133 158 208 258 308 C 75 ( 2-61/64" ) 100 ( 3-15/16" ) 125 ( 4-59/64" ) 150 ( 5-29/32" ) 200 ( 7-7/8" ) 250 ( 9-27/32" ) 300 ( 11-13/16") H 40 ( 1-37/64" ) 14 50 ( 1-31/32" ) 8 11 B T S Weight (g) 115 135 153 190 244 280 306 Box (pcs) 10 15 10 7 10 5
Item No. ECH- 75/M ECH- 75/S ECH-100/M ECH-100/S ECH-125/M ECH-125/S ECH-150/M ECH-200/M ECH-250/M ECH-300/M
HANDLE
M525
FBHANDLES
Material 304 Stainless Steel Item No. FB- 90 FB-110 FB-130 L 90 110 130 C 82 ( 3-7/32" ) 102 ( 4-1/64" ) 120 ( 4-23/32" ) H 26 ( 1-1/32" ) 28 ( 1-7/64" ) 32 ( 1-17/64" ) B 10.5 12.5 14.5 T 6 7 8 S 10 12 14 Weight (g) 45 60 93 Box (pcs) 35 25 20
Finish Mirror Carton (pcs) 280 200 160
HANDLE
M328
KB
MaterialKB-90/M KB-30/S
Finish Mirror (M) Satin (S) Carton (pcs) 400 300 200
303 Stainless Steel C 25 ( 63/64" ) 45 ( 1-25/32" ) 65 ( 2-9/16" ) 85 ( 3-11/32" ) H 23 ( 29/32" ) 22 ( 55/64" ) 22.5 ( 57/64" ) 23 ( 29/32" ) B T S 8 10 Weight (g) 18 26 33 40 Box (pcs) 40 30 20
Item No. KB-30/M KB-30/S KB-50/M KB-50/S KB-70/M KB-70/S KB-90/M KB-90/S
L 30 50 70 90
10
5
HANDLE
#6-321
KS
Satin
MaterialMirror
Finish Mirror (M) Satin (S) Carton (pcs) 200
304 Stainless Steel L 81 94 106 C 76 ( 3" ) 89 ( 3-1/2" ) 102 ( 4" ) H 23 ( 29/32" ) B 10 T 5 S 9 Weight (g) 45 48 54 Box (pcs) 20
Item No. KS-430/M KS-430/S KS-435/M KS-435/S KS-440/M KS-440/S
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
45
HANDLEHANDLES, PULLS & KNOBS HANDLES20090330
#8-321
EK-S
Mirror
Satin
Item No. EK-S635/M EK-S635/S EK-S640/M EK-S640/S EK-S650/M EK-S650/S EK-S660/M EK-S660/S
C 88.9 ( 3-1/2" ) 101.6 ( 4" ) 127 ( 5" ) 152.4 ( 6" )
Weight (g) 106 116 134 152
Box (pcs)
Carton (pcs) Material 316 Stainless Steel Finish Mirror (M) Satin (S)
20
200
HANDLE
#8-321
EK-R
Mirror
Satin
Item No. EK-R635/M EK-R635/S EK-R640/M EK-R640/S EK-R650/M EK-R650/S EK-R660/M EK-R660/S
C 88.9 ( 3-1/2" ) 101.6 ( 4" ) 127 ( 5" ) 152.4 ( 6" )
Weight (g) 95 106 123 141
Box (pcs)
Carton (pcs) Material 316 Stainless Steel Finish Mirror (M) Satin (S)
20
200
HANDLE
#8-321
KC-S
Mirror
Satin
Item No. KC-S635/M KC-S635/S KC-S640/M KC-S640/S KC-S650/M KC-S650/S KC-S660/M KC-S660/S
C 88.9 ( 3-1/2" ) 101.6 ( 4" ) 127 ( 5" ) 152.4 ( 6" )
Weight (g) 67 71 85 95
Box (pcs)
Carton (pcs) Material 316 Stainless Steel Finish Mirror (M) Satin (S)
20
200
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
46
HANDLE
#6-321
KC-RHANDLES, PULLS & KNOBS
Mirror
Satin
Item No. KC-R635/M KC-R635/S KC-R640/M KC-R640/S KC-R650/M KC-R650/S KC-R660/M KC-R660/S
C 88.9 ( 3-1/2" ) 101.6 ( 4" ) 127 ( 5" ) 152.4 ( 6" )
Weight (g) 60 67 78 88
Box (pcs)
Carton (pcs) Material 316 Stainless Steel Finish Mirror (M) Satin (S)
20
200
HANDLES
HANDLE
M530
XL-CU
Item No. XL-CU 80TT XL-CU100TT XL-CU120TT XL-CU150TT XL-CU180TT XL-CU220TT XL-CU300TT
L 82 102 122 152 182 222 302
72 ( 92 ( 112 ( 142 ( 172 ( 212 ( 292 (
C 2-27/32" ) 3-5/8" ) 4-13/32" ) 5-19/32" ) 6-25/32" ) 8-11/32" ) 11-1/2" )
32 34 36 38 40 42 44
( ( ( ( ( ( (
H 1-17/64" ) 1-11/32" ) 1-27/64" ) 1-1/2" ) 1-37/64" ) 1-42/64" ) 1-47/64" )
Weight (g) 112 136 163 200 234 282 372
Box (pcs) 10
Carton (pcs) 100
8 6
80 40 30
Material 303 Stainless Steel
Finish Mirror and Satin Combination
HANDLE
M525
XL-CUR
Satin
P
Item No. XL-CUR 80TT XL-CUR100TT XL-CUR120TT XL-CUR150TT
L 80 100 120 150
H 30 32 34 36
P 70 90 110 140
Weight (g) 101 125 150 183
Box (pcs) 10 10 10 5
Material 303 Stainless Steel
Finish Mirror and Satin combination
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
47
HANDLEHANDLES, PULLS & KNOBS HANDLES / WIRE PULLS20090330
M425
XL-JS
XL-JS360TT XL-JS260TT XL-JS165TT
Item No. XL-JS165TT XL-JS260TT XL-JS360TT
L 166 260 358
C 160 ( 6-19/64" ) 254 ( 10" ) 352 ( 13-55/64" )
H 30 ( 1-3/16" ) 33 ( 1-19/64" ) 36 ( 1-27/64" )
Weight (g) 81 122 166
Box (pcs) 15 10
Carton (pcs) 150 100
Material 316 Stainless Steel
Finish Mirror and Satin Combination
HANDLE
M425
XL-JSR
XL-JSR135TT
XL-JSR100TT
XL-JSR70TT XL-JSR40TT
Item No. XL-JSR 40TT XL-JSR 70TT XL-JSR100TT XL-JSR135TT
L 38 70 102 134
C 32 ( 1-17/64" ) 64 ( 2-33/64" ) 96 ( 3-25/32" ) 128 ( 5-1/32" )
H 27 ( 1-1/16" ) 30 ( 1-3/16" )
Weight (g) 26 35 51 63
Box (pcs) 30 20 15
Carton (pcs) 300 200 150 Material 316 Stainless Steel Finish Mirror and Satin Combination
WIRE PULL
#8-321
SWP
Item No. SWP-630/S SWP-635/S SWP-640/S SWP-696/S
L 84.2 96.9 109.6 104
C 76.2 ( 3" ) 88.9 ( 3-1/2" ) 101.6 ( 4" ) 96 ( 3-25/32" )
H
34 (1-11/32")
Weight (g) 71 78 85 81
Box (pcs)
Carton (pcs)
20
200
Material 316 Stainless Steel
Finish Satin
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
48
WIRE PULL
#8-321
SWFHANDLES, PULLS & KNOBS
Item No. SWF- 640 SWF- 650 SWF- 660 SWF- 690 SWF-6120
L 111 136.5 162 238 314.5
C 101.5 ( 127 ( 152.5 ( 228.5 ( 305 ( 4" 5" 6" 9" 12" ) ) ) ) )
H
35 (1-3/8")
Weight (g) 90 110 130 200 270
Box (pcs)
Carton (pcs)
20
200 Material 316 Stainless Steel Finish Satin
WIRE PULLS
WIRE PULL
H-75-BL-100
Item No. H-75-BL-100
Weight (g) 130
Box (pcs) 20
Carton (pcs) 80
Material 304 Stainless Steel
Finish Mirror
WIRE PULL
H-75-C
Material 304 Stainless Steel Item No. H-75-C- 66 H-75-C- 86 H-75-C-108 H-75-C-128 L1 66 86 108 128 (L 2 ) 16 18 (S) 7 10 H 30 ( 1-3/16" ) 31.5 (1-15/64") 32 (1-17/64") 40 (1-37/64") C (2-23/64" ) ( 3-5/32" ) (3-15/16" ) (4-23/32" ) D 6 8 M M4 M5 Weight (g) 23 28 54 70 Box (pcs) 100 50
Finish Polished Carton (pcs) 400 200
60 80 100 120
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
49
WIRE PULLHANDLES, PULLS & KNOBS WIRE PULLS20090330
H-42-B
No. Item No. H-42-B- 8 H-42-B-14 H-42-B- 1 H-42-B- 2 H-42-B- 3 H-42-B- 4 H-42-B-15 H-42-B- 5 H-42-B- 6 H-42-B- 7 L 66 86 75 109 120 130 162 200 250 300 H1 22 ( 55/46" ) 30 ( 1-3/16" ) 11 40 ( 1-37/64" ) H2 7 10 B 6 7 9 10 60 80 68 100 110 120 150 188 238 288 C ( 2-23/64" ) ( 3-5/32" ) ( 2-43/64" ) ( 3-15/16" ) ( 4-21/64" ) ( 4-23/32" ) ( 5-29/32" ) ( 7-13/32" ) ( 9-3/8" ) ( 11-11/32" ) R 3 3.5 4.5 5
Part Name Handle Washer Spring Washer Nut
Material
304 Stainless Steel
Finish Mirror Polished Plain
M M4x0.7 M4x0.7 M5x0.8 M6x1 M6x1
50 ( 1-31/32" )
20
12
6
M8x1.25
Weight (g) 20 27 40 80 120 125 235 270 320 365
Box (pcs) 100
Carton (pcs) 500 250
50 150
30 20
60 40
WIRE PULL
H-42-C
Material 304 Stainless Steel Item No. H-42-C- 8 H-42-C-14 H-42-C- 1 H-42-C- 2 H-42-C- 3 H-42-C- 4 H-42-C-15 H-42-C- 5 H-42-C- 6 H-42-C- 7 L 66 86 75 109 120 130 162 200 250 300 H 22 ( 55/46" ) 30 ( 1-3/16" ) B 6 7 9 10 60 80 68 100 110 120 150 188 238 288 C ( 2-23/64" ) ( 3-5/32" ) ( 2-43/64" ) ( 3-15/16" ) ( 4-21/64" ) ( 4-23/32" ) ( 5-29/32" ) ( 7-13/32" ) ( 9-3/8" ) ( 11-11/32" ) S 7 M M4x0.7 M5x0.8 8 M6x1 R 3 3.5 4.5 5 Weight (g) 18 25 30 65 100 105 185 220 265 300 Box (pcs) 100
Finish Mirror Carton (pcs) 500 250
50 150
40 ( 1-37/64" )
30 20
60 40
50 ( 1-31/32" )
12
10
M8x1.25
6
WIRE PULL (TITANIUM)L
H42-BT, H42-CTB
R
H42-BT
H42-CTC 2-M Depth S
Material Titanium Item No. H42-BT- 2 H42-BT- 4 H42-BT- 15 L 109 130 162 H1 30(1- 3/16") 40(1-37/64") 50(1-31/32") H2 11 11 20 B 9 10 12 C 100 (3-15/16") 120 (4-23/32") 150 (5-29/32") R 4.5 5 6 M M5 0.8 M6 1 M8 1.25 Weight (g) 40 63 122 Box (pcs) 20
H
Finish Polished Carton (pcs) 80
Material Titanium Item No. H42-CT- 2 H42-CT- 4 H42-CT-15 L 109 130 162 H 30(1- 3/16") 40(1-37/64") 50(1-31/32") B 9 10 12 C 100 (3-15/16") 120 (4-23/32") 150 (5-29/32") S 8 8 10 M M5 0.8 M6 1 M8 1.25 R 4.5 5 6 Weight (g) 37 59 105 Box (pcs) 20
Finish Polished Carton (pcs) 80
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
50
FOLDING HANDLE 90-degree folding handle.
HKHANDLES, PULLS & KNOBS Handle clicks into open and closed postion.
Item No. HK- 80 HK-100 HK-120
C 80 ( 3-5/32" ) 100 ( 3-15/16" ) 120 ( 4-23/32" )
L 88 108 128
Load Capacity (kg) 50 (110 lbs)
Weight (g) 125 136 146
Box (pcs) 10
Carton (pcs) 100 Material 304 Stainless Steel Finish Mirror
HANDLE
SST-7
HANDLES
Item No. SST-7M SST-7L
L 86 100
C 80 ( 3-5/32" ) 93 ( 3-21/32" )
H 23 ( 29/32" ) 27 ( 1-1/16" )
D 6 7
M Weight (g) Box (pcs) M3x25 28 30 M4x25 43
Carton (pcs) 300 Material 304 Stainless Steel Finish Satin
HANDLE
M530
LF-12
Item No. LF-12- 96 LF-12-128 LF-12-160
L 108 140 172
C 96 ( 3-25/32" ) 128 ( 5-1/32" ) 160 ( 6-19/64" )
Weight (g) 182 211 236
Box (pcs) 10
Carton (pcs) 80 60 Material 304 Stainless Steel Finish Satin
HANDLE
M425
LX
LX-110/M
LX-90/M
Item No. LX-90/M LX-110/M
L 89 109
C 76 ( 3" ) 96 ( 3-25/32" )
R 53.5 94
Weight (g) 69 71
Box (pcs) 10
Carton (pcs) 160 Material 304 Stainless Steel Finish Mirror
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
51
HANDLEHANDLES, PULLS & KNOBS HANDLESItem No. 3LC-120 3LC-130 3LC-145 L1 120 130 145 L2 29 30 35 W 20 22 25 H1 30 ( 1-3/16" ) 33 ( 1-19/64" ) 34 ( 1-11/32" ) H2 6 7 H3 5 6 C 105 ( 4-9/64" ) 115 (4-17/32") 125 (4-59/64") d 5.5 6.5 Weight Box (g) (pcs) 90 120 155 100 80 Carton (pcs) 500 400 Material 304 Stainless Steel
2LC
PAT.P
Material 316 Stainless Steel Item No. 2LC- 80 2LC-120 2LC-150 2LC-180 L 80 120 150 180 L1 32 64 89 118 C (2-33/64") (3-25/32") ( 5-1/32" ) ( 7-3/32" ) B1 16 18 21 23 B2 14 16 18 20 H ( 1-3/8" ) (1-27/64" ) (1-42/64" ) (1-49/64" ) h1 5.5 6 6.5 h2 4 4.5 5 t 8 9 10 d 5 6 d1 9.5 11
Finish Mirror Screw 4x20 5x32
64 96 128 160
35 36 42 45
Weight (g) Box (pcs) Carton (pcs) 70 12 144 106 8 96 172 6 72 225 3 36
HANDLE
3LC
Finish Mirror
HANDLE
4LC
PAT.P
Material 316 Stainless Steel C ( 2-33/64" ) ( 3-25/32" ) ( 5-1/32" ) ( 6-19/64" ) B1 48 50 B2 16 18 20 H 36.5 ( 1-7/16" ) 40 (1-37/64") 45 (1-49/64") 48 (1-57/64") h1 5.5 6 6.5 h2 4 4.5 5 t 8 9 10 d 5 6 d1 9.5 11
Finish Mirror Screw 4x20 5x32
Item No. 4LC- 82 4LC-114 4LC-150 4LC-180
L 82 114 150 180
L1 46 78 106 140
64 96 128 160
Weight (g) Box (pcs) Carton (pcs) 110 8 96 148 6 72 210 3 36 270 2 24
HANDLE (TITANIUM)
2LC-Ti
Material Titanium Item No. 2LC- 80 Ti 2LC- 120 Ti 2LC- 150 Ti L 80 120 150 L1 32 64 89 C 64 ( 2-33/64" ) 96 ( 3-25/32" ) 128 ( 5-1/32" ) B1 16 18 21 B2 14 16 18 H 35 ( 1-3/8" ) 36 (1-27/64") 42 (1-42/64") h1 5.5 6 h2 4 4.5 t 8 9 10 d 5 6 d1 9.5 11
Finish Shotblast
Weight (g) Box (pcs) Carton (pcs) 37 30 180 62 20 120 96 15 90
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
52
HANDLE
EC-H5.5, 8.2
HANDLES, PULLS & KNOBS
P
Material 303 Stainless Steel Item No. EC-H-135 EC-H-165 L 135 165 L1 120 150 B 50 50 H 40 42 T 6 6 M 20 20 P 115 145 P1 30 30
Finish Mirror Screw 4x20
L1 T H
P1
14
Weight (g) Box (pcs) 191 5 216 3
L
M
B
HANDLE
8
EC-Y
HANDLES
Material 303 Stainless Steel Item No. EC-Y-140 EC-Y-160 EC-Y-190 L 138 158 188 L1 100 120 150 C 120 140 170 B 20 H 38 40 42 T 6 M 28 Weight (g) 142 160 185 Box (pcs) 5 3 2 Carton (pcs) 50 30 20
Finish Mirror Screw 4x20
HANDLE
US
Mirror
Material 304 Stainless SteelSatin * Grip - Black/Synthetic Rubber
Finish Mirror (M) Satin (S)
Item No. L US- 70/M US- 70/S 70 US-120/M US-120/S 120 US-160/M US-160/S 160
L1 20 57 88
C 54 ( 2-1/8" ) 102 ( 4-1/64" ) 140 ( 5-33/64" )
B 17 19 22
H 28 ( 1-7/64" ) 32 ( 1-17/64" ) 37.5 ( 1-15/32" )
h 21 23
t 5.5 6.5 7.5
d 3.3 3.8 4.1
d1 6.6 7.6 8.1
Weight (g) Box (pcs) Carton (pcs) 20 20 200 45 70 10 100
Screw 3.1x16 3.5x20 4.1x25
HANDLE5.5, 8.2 5.5, 8.2 XL-CUY240TT XL-CUY260TT 12 P
XL-CUYXL-CUY120TT XL-CUY140TT XL-CUY160TT XL-CUY190TT
L1
16
Item No. XL-CUY120TT XL-CUY140TT XL-CUY160TT XL-CUY190TT XL-CUY240TT XL-CUY260TT
L 118 138 158 188 238 258
L1 80 100 120 150 180 200
B 2 20 20 20 20 20
H 36 38 40 42 44 46
T 6 6 6 6 6 6
M 30 30 30 30 37 37
P 100 120 140 170 196 216
Weight (g) Box (pcs) 148 5 171 5 195 3 228 2 278 2 301 2
10
T
H
M L
B
Material 303 Stainless Steel
Finish Mirror and Satin Combination
Screw 4x20
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
53
HANDLEHANDLES, PULLS & KNOBS HANDLES / LARGE HANDLES20090330
FT-65, 80, 100
Material 304 Stainless Steel Item No. FT- 65 FT- 80 FT-100 L 65 80 100 L1 48 64 75 C 57 ( 2-1/4" ) 72 ( 2-27/32" ) 88 ( 5-15/32" ) B1 13 14 18 B2 7 8 10 H 16 ( 5/8" ) 20 ( 25/32" ) 25 ( 63/64" ) T 3.5 4 5 t 4 4.5 5.5 M 13 14 18 d1 3.3 4.1 d2 6.4 6.4 8
Finish Mirror Screw 3.1x16 3.8x20
Weight (g) Box (pcs) Carton (pcs) 19 40 480 32 30 360 58 20 240
HANDLE
FT-120, 150
Material 304 Stainless Steel Item No. FT-120 FT-150 L 120 150 L1 102 126 C 106 ( 4-11/64" ) 132 ( 5-3/16" ) C1 24 30 B1 36 45 B2 12 15 H 27 ( 1-1/16" ) 33 ( 1-19/64" ) T 5 6 t 7 8 M 14 18
Finish Mirror Screw 3.8x20 5.1x25
d1 d 2 Weight (g) Box (pcs) Carton (pcs) 4.1 8 105 10 120 5.3 10.4 191 5 40
LARGE HANDLE
M635
FT-200, 280
Material 316 Stainless Steel Item No. FT-200 FT-280 L 200 280 L1 170 250 C 175 ( 6-57/64" ) 253 ( 9-31/32" ) C1 45 55 B1 22 26 B 70 80 H 50 ( 1-31/32" ) 62 ( 2-7/16" ) T 8 10 t 10 12 M 25 27 Weight (g) 586 1088
Finish Mirror
Box (pcs) Carton (pcs) 20 1 10
LARGE HANDLE
M635
FT-S280, 370
Material 316 Stainless Steel Item No. FT-S280 FT-S370 L 280 ( 11-1/32" ) 370 ( 14-9/16" ) L1 170 250 B 30 36 B1 22 26 H 50 ( 1-31/32" ) 62 ( 2-7/16" ) T 8 10 t 10 12 M 65 72 C 196 ( 7-23/32" ) 277 ( 10-29/32" ) C1 30 35 C2 12 18 Weight (g) 612 1154 Box (pcs) 1
Finish Mirror
Carton (pcs) 20 10
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
54
HANDLE
MG Compliant with SEMI S8-0701 guideline.
HANDLES, PULLS & KNOBS
Material 316 Stainless Steel Item No. MG-150 MG-190 MG-250 D 16 18 C R6.5 R7.5 L P (172.8) 150(5-29/32") (216.7) 190(7-31/64") (275.5) 250(9-27/32") W 62 92 145 H (56) (2-13/64") (63) (2-31/64") (68) (2-43/64") h 40 45 50 S 6 8 d 6 7 Weight (g) 295 460 595
Finish Mirror
Box (pcs) Carton (pcs) Recommended Screw 10 40 M5 25 5 M6 20
HANDLEL
M3,M4
MRBHANDLES
B
P
d
Item No. MRB-A283 MRB-A282 MRB-A281 MRB-A280 MRB-A279
Indication 2 2.5 3 3.5 4
L 60 76 94 105 122
H 18 23 25 27 27
B 6 7 8 8 8
P 54 69 86 97 114
d M3X0.5 M4X0.7 M4X0.7 M4x0.7 M4X0.7
Weight (g) 21 39 56 62 70
Box (pcs) 70 50 35 30 20
Carton (pcs) 700 500 350 300 200
Material Brass Brass Brass Brass Brass
HANDLE110
M4
35
H
Finish Satin Nickel Satin Nickel Satin Nickel Satin Nickel Satin Nickel
OPE-11016
Item No. OPE-110
Weight (g) 80
Box (pcs) 20
Carton (pcs) 200
Material Brass
Finish Satin Nickel
103
M4 0.7
HANDLEL B
KAKU
M P d Depth 7
Item No. KAKU-A161 KAKU-A160 KAKU-A159
L 84 98 124
H 24 25 29
B 7 8 9
P 78 92 113
M 7 8 11
d M3X0.5 M4X0.7 M4X0.7
Weight (g) Box (pcs) Carton (pcs) 46 35 420 58 30 360 103 20 240
Screw 3x28 4x28
H
Material Brass Brass Brass
Finish Satin Nickel Satin Nickel Satin Nickel
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
35
25
55
HANDLEHANDLES, PULLS & KNOBS HANDLES20090330
M328
OH
DCR
PB
Item No. OH-40 OH-60 OH-80 OH-100 OH-120
L 40 60 80 100 120
35 ( 55 ( 75 ( 95 ( 115 (
C 1-3/8" ) 2-5/32" ) 2-61/64" ) 3-47/64" ) 4-17/32" )
21 ( 21.5 ( 22 ( 22.5 ( 23 (
H 1-37/64" 2-23/64" 3-5/32" 3-15/16" 4-23/32"
B ) ) ) ) )
t
8
5
Weight (g) 18 24 30 36 40
Box (pcs) 25 20 15
Carton (pcs) 500 400 300Please specify the nish when ordering
Material Brass
Finish Dull Chrome (DCR), Polished Brass (PB)
HANDLE
M428
DLB
BLK CR PB
Item No. DLB-96/BLK DLB-96/CR DLB-96/PB
L 102.2
C 96 ( 3-25/32" )
H 27 (1-1/16")
Weight (g) 78.5
Box (pcs) Carton (pcs) Material 20 200 Brass Finish Black (BLK), Chrome (CR), Polished Brass (PB)
HANDLESBR8
KK-H Antibacterial coating.
SSG12 P
SNI
L
M4 0.7 Depth 12
Please specify the nish when ordering
Item No. KK-H80 KK-H110 KK-H130
L 78 108 128
P 70 100 120
H 28 29 30
Weight (g) Box (pcs) Cartons (pcs) 20 25 25 200 30
Screw 4x30
H
Material Aluminium
Finish Brown (SBR) Satin Gold (SSG) Soft Nickel (SNI)
HANDLESBRH
KK-M Antibacterial coating.
SSGP 10 M4 0.7 Depth 12
SNI
L
Please specify the nish when ordering
Item No. KK-M80 KK-M110 KK-M130
L 80 110 130
P 70 100 120
H 28 29 30
Weight (g) Box (pcs) Cartons (pcs) 20 25 25 200 30
Screw 4x30
Material Aluminium
Finish Brown (SBR) Satin Gold (SSG) Soft Nickel (SNI)
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
56
HANDLE
M425
LXHANDLES, PULLS & KNOBS
304 stainless steel version available. (P.50)
BN
PB
SN
Item No. LX-110/BN LX-110/PB LX-110/SN
Weight (g) 78
Box (pcs) 10
Carton (pcs) Material 160 Brass Finish Black Nickel (BN), Satin (SN), Polished Brass (PB)
HANDLES
HANDLEMBP-48 MBP-32 7
MBPBore Dimensions
1
218 25
17.5 28 4 4 2314
R2
2
47
3
7
R
48
No.
Part Name Handle Sleeve Washer Fixing Screw
Material
2.5
32
Finish Satin Nickel Item No. MBP-32SN MBP-48SN Weight (g) 26 28 Box (pcs) 30 25 Carton (pcs) 300 250
Brass Nickel
2.5
HANDLE
M430
122HD
(122)
C
96
M4 0.7 Depth 5
D
E
F
Item no. 122HD-BCR 122HD-ABS 123HD-W 123HD-PNI 124HD-G 124HD-CR
Code A B C D E F
Weight (g)
Box (pcs)
22
B
10
A
Carton (pcs)
82
20
200
Finish Black Chrome Brass Antique White Lacquer Pearl Nickel Gold Chrome
Material
Brass
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
57
PITCH ADJUSTABLE HANDLEHANDLES, PULLS & KNOBS PITCH ADJUSTABLE HANDLES20090330
M428
FK-100-WW
PAT
Installation
Material Brass L 100 (3-15/16") B1 13 B2 7 H1 28.5 (1-1/8") H2 19 d M40.7 Weight (g) 60 Box (pcs) 5
Finish Satin Nickel Carton (pcs) 150
Item No. FK-100-WW
PITCH ADJUSTABLE HANDLE
M535
FK-190-WW
PAT
Installation
Material Brass L 190 (7-31/64") B1 18 B2 10 H1 41 (1-39/64") H2 28 d M50.8 Weight (g) 205 Box (pcs) 10
Finish Satin Nickel Carton (pcs) 80
Item No. FK-190-WW
PITCH ADJUSTABLE HANDLE
M428
FK-120-WW
Installation PAT
Material Brass Item No. FM-120-WW L 120 (4-23/32") B1 13 B2 7 H1 28.5 (1-1/8") H2 19 d M40.7 S 8 Weight (g) 85 Box (pcs) 5
Finish Satin Nickel Carton (pcs) 150
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
58
PITCH ADJUSTABLE HANDLE
M535
FM-220-WWHANDLES, PULLS & KNOBS
Installation
Material Brass Item No. FM-220-WW L 220 (8-21/32") B1 18 B2 10 H1 41 (1-39/64") H2 28 d M50.8 S 9 Weight (g) 280 Box (pcs) 10
Finish Satin Nickel Carton (pcs) 80
PITCH ADJUSTABLE HANDLES
PITCH ADJUSTABLE HANDLE
M430
KM-96
KM-96/SN
KM-96/SG
PAT
Item No. KM-96/SN KM-96/SG
Weight (g) 174
Box (pcs) 30
Carton (pcs) 60 Material Zinc Alloy Finish Satin Nickel (SN), Satin Gold (SG)
HANDLE
SAZ
Item No. SAZ-104 SAZ-122
L1 104 122
L2 16 18
C 86 ( 3-25/64" ) 102 ( 4-1/64" )
S 8 10
W 9 10
H1 23 ( 29/32" ) 30 ( 1-3/16" )
H2 5.5 8
Weight (g) 40 85
Box (pcs) 60 40
Carton (pcs) 600 400
Material Zinc Alloy
Finish Chrome
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
59
HANDLEHANDLES, PULLS & KNOBS HANDLESItem No. XLA-HA 96 XLA-HA128 XLA-HA192 XLA-HA256 XLA-HA320 L 109 141 205 269 333 C 96 ( 3-25/32" ) 128 ( 5-1/32" ) 192 ( 7-9/16" ) 256 ( 10-5/64" ) 320 ( 12-19/32" )
936 SERIES
Item No. 936- 55-SCR 936-100-DC
L 66.5 112
C 55 ( 2-11/64" ) 100.5 ( 3-61/64" )
S 8 10
Weight (g) 40 52
Box (pcs) 50
Carton (pcs) 200
Screw M4x25 M4x28
Material Zinc Alloy
Finish Satin Chrome (SCR) Dull Chrome (DC)
HANDLE
M425
XLA-HA
PAT.P
Weight (g) 132 142 144 180 200
Box (pcs) 20
Carton (pcs) 80 No. Part Name Body Leg Material Aluminum Alloy Zinc Alloy Finish Anodized Matte Silver
10
60
HANDLE90 13.5 6.5
HIRA-A012
7.5 83 2-M4 0.7 Depth 7
Item No. HIRA-A012
Weight (g) 86
Box (pcs) 20
Carton (pcs) 240
Screw M4x28
24
Material Brass
Finish Satin Nickel
HANDLEL B
M4
ATO
M4 0.7 P
Item No. ATO-A209 ATO-A208 ATO-A207
L 90 104 121
H 18 20 21
B 13 14 15
P 80 94 112
Weight (g) 65 75 100
Box (pcs) 30 25 15
Carton (pcs) 300 250 150
(35)
H
Material Brass
Finish Satin Nickel
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
60
DOOR HANDLE
SORHANDLES, PULLS & KNOBS
Material
Finish
Anodized (S) Aluminum Alloy Anodized / Black (BL) Item No. SOR-400/S SOR-400/BL SOR-600/S SOR-600/BL SOR-800/S SOR-800/BL L (390) ( 15-23/64" ) (600) ( 23-5/8" ) (816) ( 32-1/8" ) L1 (323) (502) (686) C 335 522 710 H (60) ( 2-23/64" ) R 350 790 1440 Weight (g) 223 315 425 Box (pcs) 30 20 15 Carton (pcs) 300 200 150
DOOR HANDLES
DOOR HANDLEPAT.P
MP
Material 316 Stainless Steel Item No. MP- 500 MP- 750 MP-1000 L 500 750 1000 C 464 (18-17/64") 714 (28- 7/64") 964 (37-61/64") Weight (g) 1000 1300 1600 Box (pcs) 2
Finish Mirror Carton (pcs) 20 16 12
DOOR HANDLE
SSH
P
L
M8 Depth 20
75
Item No. SSH-2540 SSH-2560 SSH-2580 SSH-3240 SSH-3260 SSH-3280
L 400 600 800 400 600 800
P 316 516 716 316 516 716
H 75 75 75 75 75 75
D1 19 19 19 25 25 25
D2 25 25 25 32 32 32
Weight (g) Carton (pcs) 665 10 750 10 840 10 1175 5 1290 5 1400 5
D1
D2
Material 304 Stainless Steel
Finish Satin
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
61
RECESSED PULLHANDLES, PULLS & KNOBS RECESSED PULLS20090330
1.510 NAIL
HN
Bore Dimension
Material 304 Stainless Steel Item No. HN-120SH HN-150SH HN-200SH HN-250SH L 120 ( 4-23/32" ) 150 ( 5-29/32" ) 200 ( 7-7/8" ) 250 ( 9-27/32" ) L1 H B B1 B2 L2 B3 H1
Finish Satin
Weight Box Carton (g) (pcs) (pcs) 19 27 50 92 50 20 10 500 200 100
100 10 ( 25/64") 130 12 ( 15/32") 170 13.2 ( 33/64") 220
30 ( 1-3/16" ) 20 ( 25/32" ) 35 ( 1-3/8" ) 26 ( 1-1/32" ) 50 ( 1-31/32" ) 36 ( 1-27/64" )
18.5 100.5 ( 3-61/64" ) 20.5 (13/16" ) 10.5 24.5 130.5 ( 5-9/64" ) 26.5 (1-3/64" ) 12.5 170.5 ( 6-23/32" ) 34.5 36.5 (1-7/16") 13.7 220.5 ( 8-11/16" )
RECESSED PULL
SMH
Installation
Item No. SMH-30 SMH-37 SMH-45 SMH-60 SMH-80
30 ( 36 ( 46 ( 60 ( 80 (
L 1-3/16" 1-27/64" 1-13/16" 2-23/64" 3-5/32"
H ) ) ) ) )
h 7.5 ( 19/64" ) 8.5 ( 21/64" ) 9.5 ( 3/8" )
0.5
D 27.5 31.5 41 53.5 71
Weight (g) 4 6 9.5 15 25.5
Box (pcs) 100 50 25
Carton (pcs) 3600 2400 1200 500
Material 304 Stainless Steel
Finish Satin
RECESSED PULL
OP-150
Installation
Item No. OP-150
Weight (g) 30
Box (pcs) 30
Carton (pcs) 720
Material 304 Stainless Steel
Finish Satin
www.sugatsune-intl.com +81 3 3866 2260
www.sugatsune.co.uk +44 (0) 1491 680 737
62
RECESSED PULL
SKHHANDLES, PULLS & KNOBS
Installation
Material Finish / Color 304 Stainless Steel Satin (S) Brass (SKH-44/PB only) Polished Brass (SKH-44/PB) Plastic Black Item No. SKH-44 SKH-47 SKH-57 SKH-44/PB L 44 ( 1-47/64" ) 47 ( 1-27/32" ) 57 ( 2-1/4" ) 44 ( 1-47/64" ) B 44 ( 1-47/64" 47 ( 1-27/32" 57 ( 2-1/4" 44 ( 1-47/64" H ) ) ) ) h 9.8 ( 25/64" ) 10.3 ( 13/32" ) 9.8 ( 25/64" ) D 35.1 37.6 48.6 35.1 d 31 34 44 31 Weight (g) 10 11 16 10 Box (pcs) 100 60 50 Carton (pcs) 1000 1440 1200 1000
2.2
RECESSED PULLS
RECESSED PULLSD-160/SN
M425
SD-160
SD-160/CR Sheet metal mounting application
SD-160/BZ
Bore Dimensions
Item No. SD-160/CR SD-160/SN SD-160/BZ
Weight (g) 165
Box (pcs) 10
Carton (pcs) 60 Material Zinc Alloy Plastic Finish / Color Chrome (CR) / Satin Nickel (SN) / Bronze (BZ) Black
RECESSED PULL
M425
UTZ-130
UTZ-130/CR
UTZ-130/SN Sheet metal mounting application
UTZ-130/BZ
Bore Dimensions
Item No. UTZ-130/CR UTZ-130/SN UTZ-130/BZ
Weight (g) 105
Box (pcs) 10
Carton (pcs) 60 Material Zinc Alloy Plastic Finish / Color Chrome (CR) / Satin Nickel (SN) / Bronze (BZ) Black
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
63
RECESSED PULLHANDLES, PULLS & KNOBSItem No. UP-600 Weight (g) 25 Box (pcs) 50 Carton (pcs) 300 Material ABS
UP-600
100
40
94
14
22
0 R1 Depth 14
94
33
Bore Dimension
Finish Chrom / Black
RECESSED PULLM4 0.7 Depth 5 P1 P2d
5103
R
1
h2
h1
Depth h3 P3 L3
Bore Dimension
H2
L2 L1
H1
Material Zinc Alloy R1 2 3 R2 18 22 h 3 Box (pcs) Carton (pcs) 12.5 40 160 14 20 80
Finish Satin Nickel Screw M4x12
Item No. 5103-55 5103-80
L1 55 80
L2 31.5 42
H1 40 50
H2 h1 h2 31.5 15.5 12.5 40 18 14
P1 32 60
P2 16 10
L3 46 70
H3 35 44
P3 32 60
P4 10 4.5
d 4.3 4.3
RECESSED PULL
UT
Installation
Item No.
L
L1
H
h
B 36 40 47 40
B1
a
Weight Box Carton (g) (pcs) (pcs) 15 30 45 30 40 25 15 25 400 250 150 250 Material Finish / Color 304 Stainless Steel Satin (S) Brass (UT-105/PB only) Polished Brass (UT-105/PB) Plastic Black
UT- 75/S 75 ( 2-61/64" ) 71 7 UT-105/S 105 ( 4-1/8" ) 99 15.5 ( 39/64" ) UT-140/S 140 ( 5-33/64" ) 134 7.5 UT-105/PB 105 ( 4-1/8" ) 99
30.8 ( 1-7/32" ) 0.4 32.5 ( 1-9/32" ) 40.5 ( 1-19/32" ) 0.5 32.5 ( 1-9/32" )
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
H3 P4
33.3
RECESSED PULLS
R
2
64
RECESSED PULL
M410 M414
HH-KHANDLES, PULLS & KNOBS
Bore Dimensions for wood panel
Cut Out Dimensions for sheet metal Put sheet metal between face plate and cup for sheet metal application. (Max. sheet metal thickness: 2 mm)
Item No. HH-K
Weight (g) 90
Box (pcs) 10
Carton (pcs) 60
Material 316 Stainless Steel ABS
Finish / Color Mirror Black
RECESSED PULLS
RECESSED PULL
M410 M414
HH-D
Bore Dimensions for wood panel
Cut Out Dimensions for sheet metal Put sheet metal between face plate and cup for sheet metal application. (Max. sheet metal thickness: 2 mm)
Item No. HH-D
Weight (g) 85
Box (pcs) 10
Carton (pcs) 60
Material 316 Stainless Steel ABS
Finish / Color Mirror Black
RECESSED PULL114 96 22 41
M48 M415
HH-DSR4 7.5 33
14
2R17.5
32
83
6
96 108
354.5
11
87 96 15.5
4.5 8 15
4.5
10.5
862-M4 0.7
Bore Dimensions for wood panel
Cut Out Dimensions for sheet metal
R3 .75
11.5
Item No. HH-DS 114M HH-DS 114S
Finish Mirror Satin
Weight (g) 105 105
Box (pcs) 10 10
Carton (pcs) 60 60
No.
Part Name Body Case Spacer
1.5
3
10
Material 316 Stainless Steel 304 Stainless Steel 304 Stainless Steel
Finish Mirror / Satin Satin -
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
65
RECESSED PULL22 R
M48 M415
HH-KSR17.5
11
41
32
11.5
4.5
96 108 15.5
487 96
35
83
6
1.5
15
3
10
10.5
86 M4 0.7
4.5
Bore Dimensions for wood panel
Cut Out Dimensions for sheet metal
8
Item No. HH-KS 114M HH-KS 114S
Finish Mirror Satin
Weight (g) 110 110
Box (pcs) 10 10
Carton (pcs) 60 60
No.
Part Name Body Case Spacer
Material 316 Stainless Steel 304 Stainless Steel 304 Stainless Steel
Finish Mirror / Satin Satin -
RECESSED PULL
M410
XLA-HH20 30 +0.5 0
2
1
6.8
M4 Depth7
B
Depth 15+0.5 0 A B
30 40.4
PAT
C +0.5 0 4.2
4-
R
3
L
5.1
14.54.1, 8
Item No. XLA-HH300 XLA-HH600
L 300 600
Weight (g) 370 690
Box (pcs) 20 10
Material Aluminum Alloy Aluminum Alloy
Finish Anodized Anodized
The bracket for metal sheets is available. Item No.: XLA-HH40B
RECESSED PULL
M48
HH-KL160
Compliant with SEMI S8-0600 guideline. Spacer for sheet metal application sold separately.
(Optional : BSP-8) Cut Out Dimensions Sheet metal mounting application
Item No. HH-KL160
Weight (g) 260
Box (pcs) 8
Carton (pcs) 48
Material 304 Stainless Steel
Finish Satin
RECESSED PULL
M5
HH-KP150
Compliant with SEMI S8-0600 guideline.
Cut Out Dimensions
Item No. HH-KP150
Weight (g) 390
Box (pcs) 5
Carton (pcs) 50
Material 304 Stainless Steel
Finish Satin
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
R4 7.5 33
114 96
2
1
4
2
HANDLES, PULLS & KNOBS RECESSED PULLS
R3 .7 5
66
RECESSED PULL
M4
M420
HHHANDLES, PULLS & KNOBS
HH-FB
HH-FC
Cut Out Dimensions
Item No. HH-FB-1 HH-FC-1 HH-FB-2 HH-FC-2 HH-FB-3 HH-FC-3 Item No. HH-FB-1 HH-FC-1 HH-FB-2 HH-FC-2 HH-FB-3 HH-FC-3
Weight (g) 170 100 80 Stud/Nut M4 Stud 138 M4 Nut M4 Stud 109.5 M4 Nut M4 Stud 94 M4 Nut (L1 ) ( 5-7/16" ) ( 4-5/16" ) ( 3-45/64" )
Box (pcs)
Carton (pcs) 50 No. H2 62 ( 2-7/16" ) 40 ( 1-37/64" ) 43 ( 1-11/16" ) Part Name Front Plate Back Cover M4 Stud M4 Nut H3 21 14.5 12 H4 64 42 43 Material Finish Satin 304 Stainless Steel (P3 )
10 100
L2 96 ( 3-25/32" ) 71 ( 2-51/64" ) 61 ( 2-13/32" )
L3 99 73 63
(H1 ) 88 ( 3-15/32" ) 64 ( 2-33/64" ) 60 ( 2-23/64" )
P1 110 88 76
P2 65 38 32
RECESSED PULLS
11.5 13 14
RECESSED PULL
M4
HH-AS2
Cut Out Dimensions
Item No. HH-AS2
Weight (g) 50
Box (pcs) 12
Carton (pcs) 240
Material 304 Stainless Steel
Finish Satin
RECESSED PULL (TITANIUM)
HH-AS2 Ti
Cut Out Dimensions
Item No. HH-AS2 Ti
Weight (g) 30
Box (pcs) 12
Carton (pcs) 240
Material Titanium
Finish Shotblast
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
67
MEGA-RECESSED PULL (WITH BAR HANDLE) Deep depth.
HH-B
81.4
6.5P2
L1 P1 P2
30
P2
P2
P3
P3
7
H1
H2
R
L3
1
3
1
2
No.
Part Name Cup Bar End Cover L1 460 260
Material 304 Stainless Steel
Item No. HH-B400 HH-B200
H1 (186.3) (186.3)
H2 138.3 138.3
L2 415 215
P3
7.5
P1 435 235
P2 125 87.5
P3 80 80
L3 416 216
H3 140 140
4-
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
H3
HANDLES, PULLS & KNOBS RECESSED PULLSL2
For special length order, please contact customer service.
P1
68
RECESSED PULL
M420
YK-70HANDLES, PULLS & KNOBS
Ideal for pocket door applications.
PAT
Item No. YK-70
Weight (g) 37
Box (pcs) 20
Carton (pcs) 200
Material 304 Stainless Steel
Finish Satin
RECESSED PULLS
RECESSED PULL
M420
YK-W100 Ideal for pocket door applications.
PAT
Item No. YK-W100
Weight (g) 45
Box (pcs) 20
Carton (pcs) 160
Material 304 Stainless Steel
Finish Satin
RECESSED PULL
M4
M425
ES
Three different types are available: ET (Male Stud), IT (Female Stud) and WO (Weld On Type). Corner is beveled for easy cleaning.
* ES-611/IT: Female studs / Copper M4x0.7 Depth 6 ES-611/ET: Male studs / Copper M5x0.8 Depth 10 ET (Male Studs / Copper) IT (M4 Female Studs / Copper with M425 Steel screws) WO (Weld-on)
Item No. ES-611/ET ES-611/IT ES-611/WO
Weight (g) 68 68 60
Box (pcs) 20
Carton (pcs) 200 Material 304 Stainless Steel Finish Satin
40
www.sugatsune-intl.com +81 3 3866 226020090330
www.sugatsune.co.uk +44 (0) 1491 680 737
69
RECESSED PULL (W/DOOR STOPPER)HANDLES, PULLS & KNOBSItem No. HH-P135/CR HH-P135/DC
HH-P135
Door stopper can be ipped-out to prevent door from entering pocket and pin