Upload
aurora-mcdowell
View
63
Download
0
Embed Size (px)
DESCRIPTION
Subrack history at Schroff. europac rational europac lab europac mobile europac special europac lab HF. europac PRO Subrack system. europac PRO subrack system. Market requirements: availablity conform to all existing standards easy handling stability EMV- concept included - PowerPoint PPT Presentation
Citation preview
europac_PRO.ppt Folie 1Martin Traut Tag: 04/19/23
Subrack history at Schroff
europac rational
europac lab
europac mobile
europac special
europac lab HF
europac PROSubrack system
europac_PRO.ppt Folie 2Martin Traut Tag: 04/19/23
europac PRO subrack system
Market requirements:
availablity
conform to allexisting standards
easy handling
stability
EMV- conceptincluded
high features / low price
europac_PRO.ppt Folie 3Martin Traut Tag: 04/19/23
Prinzipal construction:
A.) horzontal rails DD
BB
CCD.) EMV-accessories
C.) guide rails
B.) side panels
AA
europac PRO
europac_PRO.ppt Folie 4Martin Traut Tag: 04/19/23
A.) Horizontal rails
Light-version with1-hole fixing (1)=> cost reduction
Heavy-duty-version with 2-hole fixing (2)
11
2222
europac PRO
europac_PRO.ppt Folie 5Martin Traut Tag: 04/19/23
A.) Horizontal rails
Surface anodized with conductive areas
Centering of the rail with special screw (torx head) => exact locking piston
Marking of the mountingposition by labelling every 2HP
europac PRO
europac_PRO.ppt Folie 6Martin Traut Tag: 04/19/23
B.) side panels
F = Flexible:for a variable postioning of the 19“ brackets
HHLL FF
H = Heavy-duty: for high shock and vibration requirements
L = Light:standard version with integrated bracket
=> 3 versions available
europac PRO
europac_PRO.ppt Folie 7Martin Traut Tag: 04/19/23
B.) side panels
F = Flexibel Variable positioning of the brackets for eg. recessed mounting possible
old product „europac lab“
europac PRO
europac_PRO.ppt Folie 8Martin Traut Tag: 04/19/23
B.) side panels
L = Light Standard version with integrated brackets
old product „europac rational“
Most economical version
Side panel and brackets- out of one L-shaped bended sheet of aluminium
europac PRO
europac_PRO.ppt Folie 9Martin Traut Tag: 04/19/23
B.) side panels
H = Heavy duty for high shock and vibration requirements eg. for use in trains
old product „europac mobile“
Additional stability by several tox clinchings between the side panel and the 19“ bracket
europac PRO
europac_PRO.ppt Folie 10Martin Traut Tag: 04/19/23
C.) guide rails
Large inlet funnel for easy assembly of boards (1)
1122
44
33Easy, exact positioning in the subrack (Window) (2)
ESD clip for contact of the PIU (4)
Optional bolt-on protection against shock / vibration(3)
europac PRO
Market requirementsMarket requirements
Easy assembly of the PIU =>Easy assembly of the PIU =>
europac_PRO.ppt Folie 11Martin Traut Tag: 04/19/23
C.) guide rails
Very sturdy clip-in geometry
disassembly possible by unlocking the notch lever
The use of the guide rails is also possible in 1,5mm sheet metal. Possibility to use in asheet metal subrack
europac PRO
Schroff requirementsSchroff requirements
europac_PRO.ppt Folie 12Martin Traut Tag: 04/19/23
C.) guide rails - Solutions -
1.) for plug-in units
2.) for printed circuit board without front panel
3.) for plug-in units with injector/extractor handles according to IEEE 1101.10 / 11
4.) For boards with a height of 4,4“ (111,7mm) and drive units
11 22 44 33
europac PRO
europac_PRO.ppt Folie 13Martin Traut Tag: 04/19/23
C.) guide rails
For plug-in units
head piece with a large inlet funnel for a groove width of 2,0 or 2,5mm
guide rails one-piece/multipart
guide railextra sturdy
europac PRO
europac_PRO.ppt Folie 14Martin Traut Tag: 04/19/23
C.) guide rails
For board retainer and injector/extractor handle
automatic board retainer
no need for manual opening
injector/ectractor handle with integrated assembly pin
europac PRO
europac_PRO.ppt Folie 15Martin Traut Tag: 04/19/23
C.) guide rails
For injector/extractor handle according to IEEE 1101.10 / 11
coding prevents the use of PIU´s in improper pin positions
ESD clip for alignment pin
usable with IEL, IES and IET handles
europac PRO
europac_PRO.ppt Folie 16Martin Traut Tag: 04/19/23
C.) guide rails
For boards with a height of 4,4“ (111,7mm) and drive units (3,5“ /5 1/4“)
multipart guide rail (1 pair of head pieces + 1 extrusion )
no ESD clip usable
europac PRO
europac_PRO.ppt Folie 17Martin Traut Tag: 04/19/23
D.) EMV-concept
Retrofittable shielding
According to the requirements of the customer
Without changing existent parts
europac PRO
europac_PRO.ppt Folie 18Martin Traut Tag: 04/19/23
D.) EMV-concept
3.) front panel and horizontal rail
2.) cover plate and side panel
5.) between horizontal rails
7.) backplane and side panel
1.) horizontal rail and cover plate
europac PRO
Shielding between:Shielding between:
4.) front panel and 19“ bracket
6.) front panel and side panel
europac_PRO.ppt Folie 19Martin Traut Tag: 04/19/23
D.) EMV-concept
Clip-on Rf-gaskets for contact between horizontal rail and cover plate
Gasket to clip in horizontal rail groove
Optimized protection of the gasket against damaging
europac PRO
europac_PRO.ppt Folie 20Martin Traut Tag: 04/19/23
D.) EMV-concept
Clip-on RF-gasket for contact between horizontal rail and cover plate (a) / rear panel (b)
Gasket to clip-in horizontal rail groove
Optimized protection of the gasket against damaging.
europac PRO
europac_PRO.ppt Folie 21Martin Traut Tag: 04/19/23
D.) EMV-concept
Clip-on RF-gasket for contact between front panel and horizontal rail
Mounting bracket and front panel
Front panels:surface frontage anodized, backside chromated
europac PRO
europac_PRO.ppt Folie 22Martin Traut Tag: 04/19/23
D.) EMV-concept
Flexible contact and fixing between cover and side panel
Gasket with integrated bolt-on possibilities
All rail positions possible
europac PRO
europac_PRO.ppt Folie 23Martin Traut Tag: 04/19/23
D.) EMV-concept
Vertical backplane shielding
Profile is assembled to the side panel
Contacts backplane on the connector side
europac PRO
europac_PRO.ppt Folie 24Martin Traut Tag: 04/19/23
D.) EMV-concept
Horizontal board mounting
completely shielded horizontal subracks
shielding to vertical subracks
europac PRO
europac_PRO.ppt Folie 25Martin Traut Tag: 04/19/23
europac PRO
Compatible to international standards IEC 60297-3, IEC 1587V1, DB Norm BN 41102, IEEE 1101.10 /11
Modular subrack concept
Upgrade of EMV shielding
Cost oriented construction
High qualtity level
10 patents applications
Future oriented
Summary:Summary: