Style Catalog Reference

Esko ArtiosCAD Style Catalog Reference

ES

sko ArtiosCAD tyle Catalog Reference


EskoKortrijksesteenweg 1095

BE-9051 GentBelgium

Tel.: (32) (9) 216-92-11Fax: (32) (9) 216-94-64

Other offices worldwide.

Written and revised by Adam Hartfield, June 2012.

For use with Esko ArtiosCAD 12 or greater

© Copyright 2012 Esko Software BVBA, Gent, Belgium

All rights reserved. This material, information and instructions for use containedherein are the property of Esko Software BVBA. The material, information andinstructions are provided on an AS IS basis without warranty of any kind. Thereare no warranties granted or extended by this document. Furthermore EskoSoftware BVBA does not warrant, guarantee or make any representationsregarding the use, or the results of the use of the software or the informationcontained herein. Esko Software BVBA shall not be liable for any direct, indirect,consequential or incidental damages arising out of the use or inability to use thesoftware or the information contained herein.

The information contained herein is subject to change without notice. Revisionsmay be issued from time to time to advise of such changes and/or additions.

No part of this document may be reproduced, stored in a data base or retrievalsystem, or published, in any form or in any way, electronically, mechanically, byprint, photoprint, microfilm or any other means without prior written permissionfrom Esko Software BVBA.

This document supersedes all previous dated versions.

All product names are trademarks or registered trademarks of their respectiveowners. Correspondence regarding this publication should be forwarded to:

EskoKortrijksesteenweg 1095BE-9051 [email protected]


1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 Corrugated Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

One piece containers/1 side rollovers . . . . . . . . . . . . . . . . . . . 331010W - 1 side rollover - Cover flaps . . . . . . . . . . . . 331015W - 1 side rollover - Cover flaps & lock . . . . . . . . . 431020W - 1 side rollover - Ears . . . . . . . . . . . . . . . . 531025W - 1 side rollover - Ears & lock . . . . . . . . . . . . . 631026W - 1 side rollover - Ears & lock/dust flaps off cover . . 731021W - 1 side rollover - Ears / dust flaps off cover . . . . . 8

One piece containers/2 side rollovers . . . . . . . . . . . . . . . . . . . 932015W - 2 side rollover - Cover flaps . . . . . . . . . . . . 932025W - 2 side rollover - Cover flaps & ears . . . . . . . . . 1032030W - 2 side rollover - Cover panels meet . . . . . . . . . 1132035W - 2 side rollover - Cover panels meet/with flaps . . . 1232020W - 2 side rollover - Ears . . . . . . . . . . . . . . . . 1332010W - 2 side rollover - Tuck . . . . . . . . . . . . . . . . 14

One piece containers/3 side rollovers . . . . . . . . . . . . . . . . . . . 1571035W - 3 side rollover - Angled side/header slots . . . . . . 1533015W - 3 side rollover - Cover flaps . . . . . . . . . . . . 1633010W - 3 side rollover - Tuck . . . . . . . . . . . . . . . . 17

One piece containers/Center joint . . . . . . . . . . . . . . . . . . . . 1836025W - Center joint - With dust & cover flaps . . . . . . . . 1836020W - Center joint - With dust flaps . . . . . . . . . . . . 1936010W - Center joint - Without dust flaps . . . . . . . . . . 20

One piece containers/Swing-in rollover . . . . . . . . . . . . . . . . . . 2134011W - Swing-in rollover . . . . . . . . . . . . . . . . . . 2134020W - Swing-in rollover . . . . . . . . . . . . . . . . . . 2234010W - Swing-in rollover - Tuck . . . . . . . . . . . . . . 23

One piece containers/Wrap around . . . . . . . . . . . . . . . . . . . . 2436030W - Wrap-around - Tuck with optional lock . . . . . . . 2436035W - Wrap-around - Tuck/cover flaps/optional lock . . . 25

i

Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2671035W - Trays - Angled side/with header slots . . . . . . . 2642020W - Trays - Four side rollover . . . . . . . . . . . . . . 2742030W - Trays - Preglued infold . . . . . . . . . . . . . . . 2842035W - Trays - Preglued outfold . . . . . . . . . . . . . . 2942010W - Trays - Two side rollover . . . . . . . . . . . . . . 30

FEFCO Standards - 200 Series . . . . . . . . . . . . . . . . . . . . . . 31F0200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31F0201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32F0202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33F0203 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34F0204 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35F0205 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36F0206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37F0208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38F0209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39F0210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40F0211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41F0212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42F0214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43F0215 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44F0216 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45F0217 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46F0225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47F0226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48F0227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49F0228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50F0229 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51F0230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52F0231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

FEFCO Standards - 300 Series . . . . . . . . . . . . . . . . . . . . . . 54F0300 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 54F0300 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 55F0301 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 56F0301 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 57

ii


F0301 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 58F0302 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 59F0302 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 60F0303 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 61F0303 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 62F0304 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 63F0304 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 64F0306 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 65F0306 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 66F0308 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 67F0308 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 68F0309 Base . . . . . . . . . . . . . . . . . . . . . . . . . . 69F0309 Lid . . . . . . . . . . . . . . . . . . . . . . . . . . . 70F0310 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 71F0310 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 72F0311 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 73F0311 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 74F0312 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 75F0312 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 76F0313 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 77F0313 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 78F0314a . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79F0320 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 80F0320 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 81F0321 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 82F0321 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 83F0325 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 84F0325 Cover . . . . . . . . . . . . . . . . . . . . . . . . . 85F0330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86F0351a . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87F0351b . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

FEFCO Standards - 400 Series . . . . . . . . . . . . . . . . . . . . . . 89F0401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89F0402 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90F0403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

iii

F0404 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 92F0404 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 93F0405 Body . . . . . . . . . . . . . . . . . . . . . . . . . . 94F0405 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 95F0406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96F0409 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97F0410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98F0411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99F0412 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100F0413 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101F0415 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102F0416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103F0420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104F0421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105F0422 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106F0423 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107F0424 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108F0425 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109F0426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110F0427 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111F0428 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112F0429 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113F0430 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114F0435 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115F0440 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116F0441 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117F0442 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118F0443 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119F0444 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120F0447 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121F0450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122F0451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123F0452 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124F0453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125F0454 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126F0455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

iv


F0456 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128F0458 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129F0459 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130F0460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131F0470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132F0471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133F0472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134F0473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

FEFCO Standards - 500 Series . . . . . . . . . . . . . . . . . . . . . 136F0501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136F0502 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137F0503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138F0510 Body . . . . . . . . . . . . . . . . . . . . . . . . . 139F0510 End Panel . . . . . . . . . . . . . . . . . . . . . . 140F0511 Body . . . . . . . . . . . . . . . . . . . . . . . . . 141F0511 End Panel . . . . . . . . . . . . . . . . . . . . . . 142F0512 Body . . . . . . . . . . . . . . . . . . . . . . . . . 143F0512 End Panel . . . . . . . . . . . . . . . . . . . . . . 144

FEFCO Standards - 600 Series . . . . . . . . . . . . . . . . . . . . . 145F0601 Body . . . . . . . . . . . . . . . . . . . . . . . . . 145F0601 End Panel . . . . . . . . . . . . . . . . . . . . . . 146F0602 Body . . . . . . . . . . . . . . . . . . . . . . . . . 147F0602 End Panel . . . . . . . . . . . . . . . . . . . . . . 148F0605 Body . . . . . . . . . . . . . . . . . . . . . . . . . 149F0605 End Panel . . . . . . . . . . . . . . . . . . . . . . 150F0606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151F0606a . . . . . . . . . . . . . . . . . . . . . . . . . . . 152F0606b . . . . . . . . . . . . . . . . . . . . . . . . . . . 153F0607 Body . . . . . . . . . . . . . . . . . . . . . . . . . 154F0607 End Panel . . . . . . . . . . . . . . . . . . . . . . 155F0608 Body . . . . . . . . . . . . . . . . . . . . . . . . . 156F0608 End Panel . . . . . . . . . . . . . . . . . . . . . . 157F0610 Body . . . . . . . . . . . . . . . . . . . . . . . . . 158F0610 End Panel . . . . . . . . . . . . . . . . . . . . . . 159F0615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

v

F0615a . . . . . . . . . . . . . . . . . . . . . . . . . . . 161F0615b . . . . . . . . . . . . . . . . . . . . . . . . . . . 162F0616 Body . . . . . . . . . . . . . . . . . . . . . . . . . 163F0616 End Panel . . . . . . . . . . . . . . . . . . . . . . 164F0620 Body . . . . . . . . . . . . . . . . . . . . . . . . . 165F0620 End Panel . . . . . . . . . . . . . . . . . . . . . . 166F0621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

FEFCO Standards - 700 Series . . . . . . . . . . . . . . . . . . . . . 168F0700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168F0711 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169F0712 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170F0713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171F0718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172F0747 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173F0748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174F0752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175F0759 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176F0760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177F0761 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

FEFCO Standards - 900 Series . . . . . . . . . . . . . . . . . . . . . 179F0900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179F0901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179F0902 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180F0903 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180F0904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181F0905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182F0906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183F0907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184F0908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184F0909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185F0910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185F0911 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186F0912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187F0913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188F0920 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

vi


F0921 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190F0929 Length Partition . . . . . . . . . . . . . . . . . . . 191F0929 Width Partition . . . . . . . . . . . . . . . . . . . . 192F0930 Length Partition . . . . . . . . . . . . . . . . . . . 193F0930 Width Partition . . . . . . . . . . . . . . . . . . . . 194F0931 Length Partition . . . . . . . . . . . . . . . . . . . 195F0931 Width Partition . . . . . . . . . . . . . . . . . . . . 196F0932 Length Partition . . . . . . . . . . . . . . . . . . . 197F0932 Width Partition . . . . . . . . . . . . . . . . . . . . 198F0933 Length Partition . . . . . . . . . . . . . . . . . . . 199F0933 Width Partition . . . . . . . . . . . . . . . . . . . . 200F0934 Length Partition . . . . . . . . . . . . . . . . . . . 201F0934 Width Partition . . . . . . . . . . . . . . . . . . . . 202F0935 Divider . . . . . . . . . . . . . . . . . . . . . . . . 203F0935 Length Partition . . . . . . . . . . . . . . . . . . . 204F0935 Width Partition . . . . . . . . . . . . . . . . . . . . 205F0940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206F0941 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207F0942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208F0943 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209F0944 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210F0945 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211F0946 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212F0947 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213F0948 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214F0949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215F0950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216F0951 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217F0965 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218F0966 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219F0967 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220F0970 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221F0971 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222F0972 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222F0973 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223F0974 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

vii

F0975 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225F0976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

3 Display Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Display bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227All side slope base . . . . . . . . . . . . . . . . . . . . . . 227Angle Base End Joint . . . . . . . . . . . . . . . . . . . . 228Angle Base Half Base . . . . . . . . . . . . . . . . . . . . 229Display Base2- Center Joint Flg1 . . . . . . . . . . . . . . 230Display Base 2-End Joint Flg . . . . . . . . . . . . . . . . 231Display Base 3-End Joint . . . . . . . . . . . . . . . . . . 232Display Base-Center Joint . . . . . . . . . . . . . . . . . . 233Display Base-End Joint1 . . . . . . . . . . . . . . . . . . 234Pallet Base . . . . . . . . . . . . . . . . . . . . . . . . . 235Step Base-End Joint-Flange . . . . . . . . . . . . . . . . . 236

Display Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237Counter Tray Header 2 . . . . . . . . . . . . . . . . . . . 237Counter Tray Header 4 . . . . . . . . . . . . . . . . . . . 238Display Tray Header . . . . . . . . . . . . . . . . . . . . . 239Display Tray Header 2 . . . . . . . . . . . . . . . . . . . . 240

Display Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2414 Cell Power Wing Tray . . . . . . . . . . . . . . . . . . . 241Display Tray With Dividers . . . . . . . . . . . . . . . . . . 242Self Ship Double Back . . . . . . . . . . . . . . . . . . . . 243Shelf Displayer1 . . . . . . . . . . . . . . . . . . . . . . . 244Slope Stack Side . . . . . . . . . . . . . . . . . . . . . . 245SS DBL BTM . . . . . . . . . . . . . . . . . . . . . . . . 246SS Lean Front . . . . . . . . . . . . . . . . . . . . . . . . 247SS SNG Back 1VS . . . . . . . . . . . . . . . . . . . . . 248SS Tray Double BTM . . . . . . . . . . . . . . . . . . . . 249SS Tray No Back Double BTM . . . . . . . . . . . . . . . 250SS Tray Triple BTM . . . . . . . . . . . . . . . . . . . . . 251SS Tray W Header . . . . . . . . . . . . . . . . . . . . . . 252

Easels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

viii


Double Wing Easel . . . . . . . . . . . . . . . . . . . . . 253Double Wing Easel Small . . . . . . . . . . . . . . . . . . 254Single Wing Easel . . . . . . . . . . . . . . . . . . . . . . 255

Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2565 Panel Roll . . . . . . . . . . . . . . . . . . . . . . . . . 2569 Panel Fill . . . . . . . . . . . . . . . . . . . . . . . . . . 2579 Panel Roll . . . . . . . . . . . . . . . . . . . . . . . . . 2589 Panel unev . . . . . . . . . . . . . . . . . . . . . . . . 259Bowtie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260Patryfl . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

4 Folding Carton Standards . . . . . . . . . . . . . . . . . . . . . . . . . . 263

Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263111.01.ARD - Standard sleeve . . . . . . . . . . . . . . . 263

Friction tuck tops/bottoms . . . . . . . . . . . . . . . . . . . . . . . 264122.05.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 264121.05.ARD - Reverse top tuck on 4th . . . . . . . . . . . 265123.05.ARD - Straight tuck top on 2nd . . . . . . . . . . . 266124.05.ARD - Straight tuck top on 4th . . . . . . . . . . . 267

Friction Tuck Tops/Unituck bottom . . . . . . . . . . . . . . . . . . . 268122.01.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 268121.01.ARD - Reverse tuck top on 4th . . . . . . . . . . . 269123.01.ARD - Straight tuck top on 2nd . . . . . . . . . . . 270124.01.ARD - Straight tuck top on 4th . . . . . . . . . . . 271

Friction tuck tops/Slit lock bottom . . . . . . . . . . . . . . . . . . . 272122.03.ARD - Reverse top tuck on 2nd . . . . . . . . . . . 272121.03.ARD - Reverse tuck top on 4th . . . . . . . . . . . 273123.03.ARD - Straight tuck top on 2nd . . . . . . . . . . . 274124.03.ARD - Straight tuck top on 4th . . . . . . . . . . . 275

Friction tuck tops/Houghland bottom . . . . . . . . . . . . . . . . . . 276141.10.ARD - Tuck on 2nd - Tab on 2nd . . . . . . . . . . 276141.04.ARD - Tuck on 2nd - Tab on 4th . . . . . . . . . . 277141.07.ARD - Tuck on 4th - Tab on 2nd . . . . . . . . . . 278141.01.ARD - Tuck on 4th - Tab on 4th . . . . . . . . . . . 279

ix

Friction tuck tops/Full flap auto bottom . . . . . . . . . . . . . . . . . 280151.04.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 280151.01.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 281

Friction tuck tops/Inturn auto bottom . . . . . . . . . . . . . . . . . . 282152.04.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 282152.01.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 283

Unituck slit lock top and bottom . . . . . . . . . . . . . . . . . . . . 284122.07.ARD - RT top tuck on 2nd . . . . . . . . . . . . . . 284121.07.ARD - RT top tuck on 4th . . . . . . . . . . . . . . 285123.07.ARD - ST top tuck on 2nd . . . . . . . . . . . . . . 286124.07.ARD - ST top tuck on 4th . . . . . . . . . . . . . . 287

Unituck slit lock top/Houghland bottom . . . . . . . . . . . . . . . . 288141.11.ARD - Tuck on 2nd - tab on 2nd . . . . . . . . . . 288141.05.ARD - Tuck on 2nd - tab on 4th . . . . . . . . . . . 289141.08.ARD - Tuck on 4th - tab on 2nd . . . . . . . . . . . 290141.02.ARD - Tuck on 4th - tab on 4th . . . . . . . . . . . 291

Unituck Slit Lock Top/Full flap auto bottom . . . . . . . . . . . . . . . 292151.05.ARD - Tuck top on 2nd . . . . . . . . . . . . . . . 292151.02.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 293

Unituck slit lock top/Inturn auto bottom . . . . . . . . . . . . . . . . . 294152.05.ARD Tuck top on 2nd . . . . . . . . . . . . . . . . 294152.02.ARD - Tuck top on 4th . . . . . . . . . . . . . . . 295

Standard slit lock top/Standard slit lock bottom . . . . . . . . . . . . 296122.09.ARD - RT top tuck on 2nd . . . . . . . . . . . . . . 296121.09.ARD - RT top tuck on 4th . . . . . . . . . . . . . . 297123.09.ARD - ST top tuck on 2nd . . . . . . . . . . . . . . 298124.09.ARD - ST top tuck on 4th . . . . . . . . . . . . . . 299

Standard slit lock top/Houghland bottom . . . . . . . . . . . . . . . . 300141.12.ARD - Tuck on 2nd - tab on 2nd . . . . . . . . . . 300141.06.ARD - Tuck on 2nd - tab on 4th . . . . . . . . . . . 301141.09.ARD - Tuck on 4th - tab on 2nd . . . . . . . . . . . 302141.03.ARD - Tuck on 4th - tab on 4th . . . . . . . . . . . 303

Standard slit lock top/Full flap auto bottom . . . . . . . . . . . . . . . 304

x


151.06.ARD - Tuck on 2nd . . . . . . . . . . . . . . . . . 304151.03.ARD - Tuck on 4th . . . . . . . . . . . . . . . . . 305

Standard slit lock top/Inturn auto bottom . . . . . . . . . . . . . . . . 306152.06.ARD - Tuck top on 2nd panel . . . . . . . . . . . . 306152.03.ARD - Tuck top on 4th panel . . . . . . . . . . . . 307

Partial/full overlap seal ends . . . . . . . . . . . . . . . . . . . . . . 308131.01.ARD - Flap style #1 . . . . . . . . . . . . . . . . . 308131.04.ARD - Flap style #2 . . . . . . . . . . . . . . . . . 309131.05.ARD - Flap style #3 . . . . . . . . . . . . . . . . . 310131.06.ARD - Flap style #4 . . . . . . . . . . . . . . . . . 311131.07.ARD - Flap style #5 . . . . . . . . . . . . . . . . . 312

Trays/Beers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313222.05.ARD - 6 corner . . . . . . . . . . . . . . . . . . . 313222.02.ARD - Standard/Full drag . . . . . . . . . . . . . . 314

Trays/Brightwoods . . . . . . . . . . . . . . . . . . . . . . . . . . . 315261.01.ARD - Double sidewall/Double endwall/

Flap style #1 . . . . . . . . . . . . . . . . . . . . . . 315261.02.ARD - Double sidewall/Double endwall/

Flap style #2 . . . . . . . . . . . . . . . . . . . . . . 316261.03.ARD - Double sidewall/Double endwall/

Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 317241.01.ARD - Single sidewall/Double endwall/



Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 320221.01.ARD - Single sidewall/Single endwall/



Flap style #3 . . . . . . . . . . . . . . . . . . . . . . 323

Trays/Infold-Outfold . . . . . . . . . . . . . . . . . . . . . . . . . . 324223.02.ARD - Infold/Outfold . . . . . . . . . . . . . . . . . 324

Trays/Kwikset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325

xi

251.01.ARD - Kwikset tray with reinforcing tabs . . . . . . . 325251.04.ARD - Standard Kwikset tray . . . . . . . . . . . . 326

Trays/Walker locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 327281.01.ARD - Walker lock . . . . . . . . . . . . . . . . . . 327281.02.ARD - Walker lock 2/tri-seal lid . . . . . . . . . . . 328

ECMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329100.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 329110.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 330120.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 331130.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 332140.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 333150.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 334160.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 335170.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 336171.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 337180.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . 33850.01a . . . . . . . . . . . . . . . . . . . . . . . . . . . 33960.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34070.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34180.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34290.01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343

xii

Esko ArtiosCAD Style Catalog ReferenceWelcome 1

Welcome

Introduction

Esko ArtiosCAD has pre-made design file templates called standards. These standards are grouped in style catalogs. This book is a reference of each standard contained in the ArtiosCAD Corrugated style catalog, the FEFCO style catalog, the Displays style catalog, and the ArtiosCAD Folding Carton style catalog. Style catalogs from other Esko products may be installed on your machine; please refer to the reference manuals for those products for pictures of those standards.

Each design shown in this book was created using its default style choices. For those standards without folded documentation plots, single designs were created and then converted to 3D.

You can add your own designs to the Style Catalogs in the Defaults module of Esko ArtiosCAD. For more information, see the Defaults chapter of the Esko ArtiosCAD Administrator Guide.

To learn more about using standards, see the Builder chapter of the Esko ArtiosCAD User Guide.

1

This page intentionally left blank.

2

Esko ArtiosCAD Style Catalog ReferenceOne piece containers/1 side rollovers 2

Corrugated Standards

One piece containers/1 side rollovers

31010W - 1 side rollover - Cover flaps

3

31015W - 1 side rollover - Cover flaps & lock

4


31020W - 1 side rollover - Ears

5

31025W - 1 side rollover - Ears & lock

6


31026W - 1 side rollover - Ears & lock/dust flaps off cover

7

31021W - 1 side rollover - Ears / dust flaps off cover

8




9

32025W - 2 side rollover - Cover flaps & ears

10


32030W - 2 side rollover - Cover panels meet

11

32035W - 2 side rollover - Cover panels meet/with flaps

12


32020W - 2 side rollover - Ears

13

32010W - 2 side rollover - Tuck

14



71035W - 3 side rollover - Angled side/header slots

15


16


33010W - 3 side rollover - Tuck

17

One piece containers/Center joint

36025W - Center joint - With dust & cover flaps

18

Esko ArtiosCAD Style Catalog ReferenceOne piece containers/Center joint 2

36020W - Center joint - With dust flaps

19

36010W - Center joint - Without dust flaps

20

Esko ArtiosCAD Style Catalog ReferenceOne piece containers/Swing-in rollover 2

One piece containers/Swing-in rollover

34011W - Swing-in rollover

21

34020W - Swing-in rollover

22

Esko ArtiosCAD Style Catalog ReferenceOne piece containers/Swing-in rollover 2

34010W - Swing-in rollover - Tuck

23

milos.tufegdzic

Highlight

One piece containers/Wrap around

36030W - Wrap-around - Tuck with optional lock

24

Esko ArtiosCAD Style Catalog ReferenceOne piece containers/Wrap around 2

36035W - Wrap-around - Tuck/cover flaps/optional lock

25

Trays

71035W - Trays - Angled side/with header slots

26

Esko ArtiosCAD Style Catalog ReferenceTrays 2

42020W - Trays - Four side rollover

27

42030W - Trays - Preglued infold

28

Esko ArtiosCAD Style Catalog ReferenceTrays 2

42035W - Trays - Preglued outfold

29

42010W - Trays - Two side rollover

30

Esko ArtiosCAD Style Catalog ReferenceFEFCO Standards - 200 Series 2

FEFCO Standards - 200 Series

FEFCO standards are corrugated standards primarily used in Europe.

Each standard is shown on its own page folded and unfolded.

F0200

31

F0201

32


F0202

33

F0203

34


F0204

35

F0205

36


F0206

37

F0208 F0207 does not exist.

38


F0209

39

F0210

40


F0211

41

F0212

42


F0214 There is no F0213.

43

F0215

44


F0216

45

F0217

46


F0225

47

F0226

48


F0227

49

F0228

50


F0229

51

F0230

52


F0231

53


F0300 Base

54


F0300 Lid

55

F0301 Base

56


F0301 Base

57

F0301 Lid

58


F0302 Base

59

F0302 Lid

60


F0303 Base

61

F0303 Lid

62


F0304 Base

63

F0304 Lid

64


F0306 Base

65

F0306 Lid

66


F0308 Base

67

F0308 Lid

68


F0309 Base

69

F0309 Lid

70


F0310 Body

71

F0310 Cover

72


F0311 Body

73

F0311 Cover

74


F0312 Body

75

F0312 Cover

76


F0313 Body

77

F0313 Cover

78


F0314a

79

F0320 Body

80


F0320 Cover

81

F0321 Body

82


F0321 Cover

83

F0325 Body

84


F0325 Cover

85

F0330

86


F0351a

87

F0351b

88



F0401

89

F0402

90


F0403

91

F0404 Body

92


F0404 Caps

93

F0405 Body

94


F0405 Caps

95

F0406

96


F0409

97

F0410

98


F0411

99

F0412

100


F0413

101

F0415

102


F0416

103

F0420

104


F0421

105

F0422

106


F0423

107

F0424

108


F0425

109

F0426

110


F0427

111

F0428

112


F0429

113

F0430

114


F0435

115

F0440

116


F0441

117

F0442

118


F0443

119

F0444

120


F0447

121

F0450

122


F0451

123

F0452

124


F0453

125

F0454

126


F0455

127

F0456

128


F0458

129

F0459

130


F0460

131

F0470

132


F0471

133

F0472

134


F0473

135


F0501

136


F0502

137

F0503

138


F0510 Body

139

F0510 End Panel

140


F0511 Body

141

F0511 End Panel

142


F0512 Body

143

F0512 End Panel

144



F0601 Body

145

F0601 End Panel

146


F0602 Body

147

F0602 End Panel

148


F0605 Body

149

F0605 End Panel

150


F0606

151

F0606a

152


F0606b

153

F0607 Body

154


F0607 End Panel

155

F0608 Body

156


F0608 End Panel

157

F0610 Body

158


F0610 End Panel

159

F0615

160


F0615a

161

F0615b

162


F0616 Body

163

F0616 End Panel

164


F0620 Body

165

F0620 End Panel

166


F0621

167


F0700

168


F0711

169

F0712

170


F0713

171

F0718

172


F0747

173

F0748

174


F0752

175

F0759

176


F0760

177

F0761

178



F0900

F0901

179

F0902

F0903

180


F0904

181

F0905

182


F0906

183

F0907

F0908

184


F0909

F0910

185

F0911

186


F0912

187

F0913

188


F0920

189

F0921

190


F0929 Length Partition

191

F0929 Width Partition

192



193


194



195


196



197


198



199


200



201


202


F0935 Divider

203


204



205

F0940

206


F0941

207

F0942

208


F0943

209

F0944

210


F0945

211

F0946

212


F0947

213

F0948

214


F0949

215

F0950

216


F0951

217

F0965 [

218


F0966

219

F0967

220


F0970

221

F0971

F0972

222


F0973

223

F0974

224


F0975

225

F0976

226

Esko ArtiosCAD Style Catalog ReferenceDisplay bases 3

Display Standards

Display bases

All side slope base

227

Angle Base End Joint

228


Angle Base Half Base

229

Display Base2- Center Joint Flg1

230


Display Base 2-End Joint Flg

231

Display Base 3-End Joint

232


Display Base-Center Joint

233

Display Base-End Joint1

234


Pallet Base

235

Step Base-End Joint-Flange

236

Esko ArtiosCAD Style Catalog ReferenceDisplay Headers 3

Display Headers

Counter Tray Header 2

237

Counter Tray Header 4

238

Esko ArtiosCAD Style Catalog ReferenceDisplay Headers 3

Display Tray Header

239

Display Tray Header 2

240

Esko ArtiosCAD Style Catalog ReferenceDisplay Trays 3

Display Trays

4 Cell Power Wing Tray

241

Display Tray With Dividers

242


Self Ship Double Back

243

Shelf Displayer1

244


Slope Stack Side

245

SS DBL BTM

246


SS Lean Front

247

SS SNG Back 1VS

248


SS Tray Double BTM

249

SS Tray No Back Double BTM

250


SS Tray Triple BTM

251

SS Tray W Header

252

Esko ArtiosCAD Style Catalog ReferenceEasels 3

Easels

Double Wing Easel

253

Double Wing Easel Small

254

Esko ArtiosCAD Style Catalog ReferenceEasels 3

Single Wing Easel

255

Fillers

5 Panel Roll

256

Esko ArtiosCAD Style Catalog ReferenceFillers 3

9 Panel Fill

257

9 Panel Roll

258


9 Panel unev

259

Bowtie

260


Patryfl

261


262

Esko ArtiosCAD Style Catalog ReferenceSleeves 4

Folding Carton Standards

Sleeves

111.01.ARD - Standard sleeve

263

Friction tuck tops/bottoms

122.05.ARD - Reverse top tuck on 2nd

264

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/bottoms 4

121.05.ARD - Reverse top tuck on 4th

265

123.05.ARD - Straight tuck top on 2nd

266

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/bottoms 4

124.05.ARD - Straight tuck top on 4th

267

Friction Tuck Tops/Unituck bottom


268

Esko ArtiosCAD Style Catalog ReferenceFriction Tuck Tops/Unituck bottom 4

121.01.ARD - Reverse tuck top on 4th

269


270

Esko ArtiosCAD Style Catalog ReferenceFriction Tuck Tops/Unituck bottom 4


271

Friction tuck tops/Slit lock bottom


272

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Slit lock bottom 4

121.03.ARD - Reverse tuck top on 4th

273


274

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Slit lock bottom 4


275

Friction tuck tops/Houghland bottom

141.10.ARD - Tuck on 2nd - Tab on 2nd

276

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Houghland bottom 4

141.04.ARD - Tuck on 2nd - Tab on 4th

277

141.07.ARD - Tuck on 4th - Tab on 2nd

278

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Houghland bottom 4

141.01.ARD - Tuck on 4th - Tab on 4th

279

Friction tuck tops/Full flap auto bottom

151.04.ARD - Tuck top on 2nd

280

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Full flap auto bottom 4

151.01.ARD - Tuck top on 4th

281

Friction tuck tops/Inturn auto bottom


282

Esko ArtiosCAD Style Catalog ReferenceFriction tuck tops/Inturn auto bottom 4


283

Unituck slit lock top and bottom

122.07.ARD - RT top tuck on 2nd

284

Esko ArtiosCAD Style Catalog ReferenceUnituck slit lock top and bottom 4

121.07.ARD - RT top tuck on 4th

285

123.07.ARD - ST top tuck on 2nd

286

Esko ArtiosCAD Style Catalog ReferenceUnituck slit lock top and bottom 4

124.07.ARD - ST top tuck on 4th

287

Unituck slit lock top/Houghland bottom

141.11.ARD - Tuck on 2nd - tab on 2nd

288

Esko ArtiosCAD Style Catalog ReferenceUnituck slit lock top/Houghland bottom 4

141.05.ARD - Tuck on 2nd - tab on 4th

289

141.08.ARD - Tuck on 4th - tab on 2nd

290

Esko ArtiosCAD Style Catalog ReferenceUnituck slit lock top/Houghland bottom 4

141.02.ARD - Tuck on 4th - tab on 4th

291

Unituck Slit Lock Top/Full flap auto bottom


292

Esko ArtiosCAD Style Catalog ReferenceUnituck Slit Lock Top/Full flap auto bottom 4


293

Unituck slit lock top/Inturn auto bottom

152.05.ARD Tuck top on 2nd

294

Esko ArtiosCAD Style Catalog ReferenceUnituck slit lock top/Inturn auto bottom 4


295

Standard slit lock top/Standard slit lock bottom

122.09.ARD - RT top tuck on 2nd

296

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Standard slit lock bottom 4

121.09.ARD - RT top tuck on 4th

297

123.09.ARD - ST top tuck on 2nd

298

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Standard slit lock bottom 4

124.09.ARD - ST top tuck on 4th

299

Standard slit lock top/Houghland bottom

141.12.ARD - Tuck on 2nd - tab on 2nd

300

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Houghland bottom 4

141.06.ARD - Tuck on 2nd - tab on 4th

301

141.09.ARD - Tuck on 4th - tab on 2nd

302

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Houghland bottom 4

141.03.ARD - Tuck on 4th - tab on 4th

303

Standard slit lock top/Full flap auto bottom

151.06.ARD - Tuck on 2nd

304

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Full flap auto bottom 4

151.03.ARD - Tuck on 4th

305

Standard slit lock top/Inturn auto bottom

152.06.ARD - Tuck top on 2nd panel

306

Esko ArtiosCAD Style Catalog ReferenceStandard slit lock top/Inturn auto bottom 4

152.03.ARD - Tuck top on 4th panel

307

Partial/full overlap seal ends

131.01.ARD - Flap style #1

308

Esko ArtiosCAD Style Catalog ReferencePartial/full overlap seal ends 4


309


310

Esko ArtiosCAD Style Catalog ReferencePartial/full overlap seal ends 4


311


312

Esko ArtiosCAD Style Catalog ReferenceTrays/Beers 4

Trays/Beers

222.05.ARD - 6 corner

313

222.02.ARD - Standard/Full drag

314

Esko ArtiosCAD Style Catalog ReferenceTrays/Brightwoods 4

Trays/Brightwoods

261.01.ARD - Double sidewall/Double endwall - Flap style #1

315

261.02.ARD - Double sidewall/Double endwall/Flap style #2

316


261.03.ARD - Double sidewall/Double endwall/Flap style #3

317

241.01.ARD - Single sidewall/Double endwall/Flap style #1

318



319


320


221.01.ARD - Single sidewall/Single endwall/Flap style #1

321


322



323

Trays/Infold-Outfold

223.02.ARD - Infold/Outfold

324

Esko ArtiosCAD Style Catalog ReferenceTrays/Kwikset 4

Trays/Kwikset

251.01.ARD - Kwikset tray with reinforcing tabs

325

251.04.ARD - Standard Kwikset tray

326

Esko ArtiosCAD Style Catalog ReferenceTrays/Walker locks 4

Trays/Walker locks

281.01.ARD - Walker lock

327

281.02.ARD - Walker lock 2/tri-seal lid

328

Esko ArtiosCAD Style Catalog ReferenceECMA 4

ECMA

100.01

329

110.01

330


120.01

331

130.01

332


140.01

333

150.01

334


160.01

335

170.01

336


171.01

337

180.01

338


50.01a

339

60.01

340


70.01

341

80.01

342


90.01

343


344

Documents

Style Catalog Reference