Studio camera with optical fiber transmission AK-HC3800 HD Studio Camera KEY FEATURES • 2/3-type 2.2-megapixel 60dB SNR 3CCD HD Studio Camera • Dynamic range stretch • 12-axis color correction • • The 2/3-type 2.2-megapixel 3CCD camera system offers F12 (2,000 lx) sensitivity, low smear, and an excellent S/N ratio of 60 dB (at 59.94 Hz). Switchable between 1080/59.94i/50i, 1080/29.97psF (over 59.94i), 1080/25psF (over 50i), 720/59.94p/50p (CCU) SD/HD formats for worldwide use The newly developed 16 bit A/D converter and a 38 bit digital signal processing circuit ensure high-quality image processing. The DRS (Dynamic Range Stretch) function suppresses blocked shadows and blown highlights. The Film Rec Gamma and Scan Reverse functions provide powerful support in digital cinema production. Features an internal digital extender (x2 magnification) 12-axis color correction, detail, skin tone detail and matrix adjustment An SD Memory Card can be used for firmware version up. AK-HC3800 - camera head The newly developed AK-HC3800 Studio Handy Camera is equipped with a high-sensitivity, high-quality 2/3-type
AK-HC3800Studio camera with optical fiber transmission AK-HC3800 HD
Studio Camera
KEY FEATURES
• Dynamic range stretch
• 12-axis color correction
•
•
The 2/3-type 2.2-megapixel 3CCD camera system offers F12 (2,000 lx)
sensitivity, low smear, and an excellent S/N ratio of 60 dB (at
59.94 Hz). Switchable between 1080/59.94i/50i, 1080/29.97psF (over
59.94i), 1080/25psF (over 50i), 720/59.94p/50p (CCU) SD/HD formats
for worldwide use The newly developed 16 bit A/D converter and a 38
bit digital signal processing circuit ensure high-quality image
processing. The DRS (Dynamic Range Stretch) function suppresses
blocked shadows and blown highlights. The Film Rec Gamma and Scan
Reverse functions provide powerful support in digital cinema
production. Features an internal digital extender (x2
magnification) 12-axis color correction, detail, skin tone detail
and matrix adjustment An SD Memory Card can be used for firmware
version up.
AK-HC3800 - camera head
The newly developed AK-HC3800 Studio Handy Camera is equipped with
a high-sensitivity, high-quality 2/3-type
2.2-megapixel 3CCD and a new high-precision 16 bit A/D image
processing circuit. By using the AK-HC3800 together with the
AK-HCU200 Camera Control Unit and AK-HRP200G Remote Operation Panel
that are being released at the same time, an optical fiber
transmission studio camera system can be configured at a low cost.
The camera and camera control unit can be connected for
long-distance transmission of video signals over approximately
1,200 m when power is supplied from the camera control unit. The
camera control unit and remote operation panel are connected by a
dedicated cable. A LAN cable can also be used in the future for an
IP connection of these units.
Overall, the system is easy to use and operate, and offers
excellent cost-performance.
AK-HCU200E - camera control unit
The camera control unit AK-HCU200E allows a high-quality,
long-distance optical fibre transmission camera system to be
configured at low cost. The optical fibre transmission is
supporting uncompressed video signals over a distance of
approximately 1.200 m between the camera and camera control unit.
The compact, lightweight unit measures 2U in height and is
rack-mountable. Additionally the AK-HCU200E has a built-in cross
converter supporting 720p/59.94 and 720p/50.
Key features / benefits
Cost Effective Optical Fiber Transmission Small Size: Full size 2
Rack Unit Format: 1080i/50(59.94), 720p/50(59.94) IP Protocol SD
card slot (to store/recall settings, Version Up) Distance 1,200m
(Camera to CCU) Prompter (one prompter input is provided as a
standard feature) Embedded Audio for HD SDI signal output Web
Setting - The web setting can be done by connecting CCU wit a PC
for CCU setting, application and FPGA programming. Special jig
tools and extender board are not necessary for the upgrade. Output:
SDI OUT x 2, SDI OUT (PM) x 2 RET input (SDI: 2 channels, VBS: 1
channel)
AK-HRP200E - remote operation panel
The compact operation panel AK-HRP200E is capable to support IP
control of the studio camera AK-HC3800. IP control can also be used
for remote control of compatible Panasonic and PTZ cameras. The
unit has a compact 6U size and is equipped with a joystick control
lever which allows iris and pedestal operation. Scene file
functions are also provided. In addition the AK-HRP200E remote
operation panel is equipped with an SD Memory Card slot for saving
user files and updating firmware version.
Key features / benefits
Compact size Joystick-type iris control IP connection SD card for
setting & version up Maximum cable distance from ROP to CCU:
50m
AK-HRP935A – remote operation panel
The Panasonic AK-HRP935A Remote Operation Panel, compact 1/4-type
rack size, allows easily adjustment of AK-HC3500A and AK-HC3800
camera system parameters remotely. Fully control of camera settings
with joystick-type iris control.
Key features / benefits
Compact size for easy installation in small spaces Full remote
control of AK-HC3500A and AK-HC3800 parameters Joystick-type iris
control
AK-MSU935A – master setup unit
The AK-MSU935A, master setup unit (MSU) has the ability to adjust
the entire range of parameters in the studio camera and can be
connected to up to 12 camera systems (AK-HC3500A and AK-HC3800). It
has a large 16cm LCD display and direct access keys for menu
settings, allowing easy and quick operation of all camera
functions.
SD memory card slot allows for storing and recalling three user
references, eight scene files and sixteen lens files. Small and
light weight, measuring in at 340mm x 75mm x 264mm and only 3.25kg
the AK-MSU935A can be easily installed in either the OB van or
studio.
Key features / benefits
Control of up to 12 camera systems (AK-HC3500A and AK-HC3800) Large
16cm LCD display for easy operation SD memory card slot for
storing/recalling settings
AK-HVF70E - viewfinder
The AK-HVF70E is a 17.8cm LCD color viewfinder with light weight,
low power consumption and a high resolution plus versatile assist
functions like focus-in- red and pixel-to-pixel. By direct connect
functionality no separate cable is necessary to connect the VF to
the studio camera.
Key features / benefits
Weight: 1.8kg Resolution: 1024 x 600 (WSVGA) Focus assist functions
(focus-in-red, pixel-to-pixel) Three assignable function keys
Contrast, brightness and peaking are adjustable Tilt angle: 90°
upward and 60° downward
Please click here for a list of operation manuals to
download.
SPECIFICATIONS Power Supply 12 V DC (during external power supply
operation)
190 V DC (when CCU is connected)
Power Consumption 25 W (during external power supply operation,
camera only) 53 W (maximum power during external power supply
operation when maximum power supplied for each output connector
while all accessories are connected) 60 W (maximum power when CCU
is connected and maximum power supplied for each output connector
while all accessories are connected)
Operating Temperature –10 °C to 45 °C (14°F to 113°F) Preheating
required at temperatures below 0°C (32°F)
Storage Temperature –20 °C to 60 °C (–4°F to 140°F)
Operating Humidity 10 % to 85 % (no condensation)
Weight Approx. 3.7 kg (approx. 8.16 lb)
Dimensions (W x H x D) 135 mm x 260 mm x 367.5 mm (5-5/16 inches x
10-1/4inches x 14-7/16 inches) excluding protrusions
Pickup Devices 2/3 type 2.2 million pixel IT, CCD x 3
System GBR pickup system
Optical Filter ND: Clear, 1/4, 1/16, 1/64
Lens Mount Bayonet type
Output Standard SMPTE 292M
Output Format 1080/59.94i, 1080/50i, 1080/23.98p(over59.94i),
25p(over50i), 1080/29.97p(over59.94i), 720/59.94p*1, 720/50p*1,
1080/23.98PsF*1
Horizontal Frequency 33.716 kHz, 1125 line frame (59.94 Hz) 28.125
kHz, 1125 line frame (50 Hz)
Vertical Frequency 59.94 Hz or 50 Hz, interlace
MIC Input –60 dBu to 4 dBu (XLR 3-pin female x 2) Gain selected by
camera menu
HD-SDI Output BNC x 2 (HD-SDI 1/HD-SDI 2) HD signal = 0.8 V [p-p],
75 Ω The HD-SDI 2 signal output can be added to the regular images
using the camera menu item setting and switched to the VF or RET
image output.
Prompter Output BNC x 1, VBS signal = 1.0 V [p-p], 75 Ω
DC Out 12 V, MAX. 1A
RET Control Terminal Round 6 pin x 1
VF Round 20 pin x 1, D-Sub 29 pin x 1
Power Switching CCU, OFF, EXT
User 1/2/3 Functions specified by menu items can be assigned to the
switch.
RET A/B Selection For selecting the return signal
RET/PTT Switching RET, PPT
White Balance Mode*2 A, B, preset
Shutter Speed Selection*2 59.94 Hz: 1/48 (23.98p), 1/60 (23.98p,
29.97p), 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
50 Hz: 1/50 (25p), 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000,
1/1500, 1/2000
Intercom 2 MIC ON/OFF, receiving level, or PGM level
MIC Setting MIC power, MIC gain, MIC1 selection
Note *1: The 720/59.94P, 720/50P and 1080/23.98PsF formats must be
selected at the CCU. *2: When the CCU is connected, the selection
functions cannot be used. Control is performed from the ROP.
* When IP connection, 1080/29.97sF, 1080/50PsF, 720/59.94p, and
720/50p format are used, you may need to update AK-HC3800 firmware.
For details, see the Panasonic website.
http://pro-av.panasonic.net/
URL:
https://business.panasonic.cz/telecamere-professionali/Studiocamera_optical_fiber_transmission_AK-HC3800