Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
other welder options available
GENT4 Made in USA
The best portable stud welding system in the industry. 256KVA Generating System providing 480 VAC ,3 phase, 300 Amps to power any stud welder of choice. The all-aluminum, powdered coated weather enclosure is fully sound attenuated. Don’t let the quiet rumble and low emis-sions from the Tier 4 final engine fool you. This stud welding system dominates the market with its award winning performance and time saving convenience enhancements. Easy Flip down doors gives you quick and easy access to the welder, cable and generator controls.
Loaded with Performance Packed Full of Convenience
Easy Access to Generator Controls Easy Outside Cable Access
Stud Welder Mounted Inside Trailer Housing
Easy Access to Welder Controls
STUD WELDING PRODUCTS, INCYour Number One Stud
Specifications
Downey, CA9459 Washburn RdDowney CA 90242Ph: 800-252-1919Fax: 562-862-3022
Hayward, CA2391 American AveHayward, CA 94545Ph: 510-782-7883Fax: 510-782-7918
Phoenix, AZ3535 E Wier Ave #4Phoenix, AZ 85040Ph: 602-305-9350Fax: 602-305-4890
Kent, WA7820 S. 210th St #C103Kent, WA 98032Ph: 425-656-9787Fax: 425-656-9786
Visit our website at www.StudWeldProd.com or email [email protected]
Trailer mounted unit• Surge braking system for greater stability and security• 12,000 lb. trailer rating• Diamond plate fenders (removable for easy replacement)• Pintle hitch equipped.• 90 gallons integrated fuel tank
Engine: Cummings QSL9 tier 4 final certified
Critical application vibration isolated muffler integrated into the weather proof housing.
Marathon alternator model 431PSL6206
Instrument panel engine information availability• Engine RPM• Engine total run time• Engine total number of starts• Engine battery voltage output• Engine alternator voltage output• Oil pressure• Oil temperature• Coolant temperature• Coolant pressure• Turbo pressure• Exhaust temperature• Manifold temperature• Fuel temperature• Fuel pressure• Real time fuel consumption rate• Lifetime fuel consumption used
Engine shutdown safety protection• Over speed• Low oil pressure• Low oil level• Low water level• Over temperature
Instrument panel alternator information availability • Hertz output• Voltage output per phase to ground• Voltage output phase to phase• Metering of amperage draw under load• Metering of KW and KVA draw under load• Historical lifetime average KW and KVA draw on alternator
150 Amp main stud machine breaker, 200 Amp auxiliary breaker
Two (2) 120 VAC, 20A utility outlets with separate circuit breakers
Weather proof/sound attenuated insulated aluminum housing covering both generator and stud welding system. All housing doors are lockable for security.
Convenient small access doors integrated into the main housing doors for easy access to the diesel control panel and the stud welder control panel. These doors are windowed and located next to each other on the side of the housing so all controls can be seen without opening the door. This eliminates the need to open the main doors of the housing to make any adjustments to the stud welder or to monitor the diesel/alternator panel.
Other features which are included:• Engine block heater, Battery trickle charger• Easy access drains for coolant, oil, and fuel water bleed• Tool storage box mounted on tongue of trailer• Housing doors lift off removable for easy servicing. • System weight (dry): 9,250 Lbs.
Warranty• Enclosure- 1 year unlimited hours• Generator/Marathon- 1 year unlimited hours• Engine/Cummins- 2 years from engine purchase date or 2000 hours• SWP welder- 2 year on power supply
STUD WELDING PRODUCTS, INCYour Number One Stud