Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
STUC 45/...VERTICAL CABLE LADDER
. is particularly suitable for fl exible laying of cables in vertical laying direction
. is ideally created for cable laying on both sides
. allows a fl exible rung distance and additional rung installation due to thecontinuous holm perforation
. is characterised by a high load capacity of the rung
. can be used with U-clamps BU... and BUK...
Niedax GmbH & Co. KGAsbacher Straße 141 . D-53545 Linz/RheinTel: +49 (0) 2644/5606-0 . Fax: +49 (0) 2644/5606-13 . [email protected] www.niedax.de
KR 36
{STEIGETRASSE-SYSTEM}
Vertical Cable Laddermade of U 4530 profiles and C-profile 2986, unassembled
Screws and body washers are included.For transport reasons, the delivery is made as a kit. The scope of delivery includes:10 rungs per 3 m delivery length (corresponds to a rung distance of 30 cm) and also 20 rungs per 6 mdelivery length (corresponds to a rung distance of 30 cm).Connecting and fastening elements such as head plates, joint connectors and wall connectionbrackets must be ordered separately.Corresponding U-clamps (BU... and BUK...) are listed in the KI catalogue.
STUC 45/203/3 S
43,5 208 3000 1,75STUC 45/303/3 S 43,5 308 3000 1,75STUC 45/403/3 S 43,5 408 3000 1,75STUC 45/503/3 S 43,5 508 3000 1,75STUC 45/603/3 S 43,5 608 3000 1,75STUC 45/203/6 S 43,5 208 6000 1,75STUC 45/303/6 S 43,5 308 6000 1,75STUC 45/403/6 S 43,5 408 6000 1,75STUC 45/503/6 S 43,5 508 6000 1,75STUC 45/603/6 S 43,5 608 6000 1,75
NNNNNNNNNN
S
SSSSSSSSS
Model No. Height H
WidthB
LengthL
Admis-sible load
Fmm mm mm kN
Smallestpackaging
unit
3 m3 m3 m3 m3 m6 m6 m6 m6 m6 m
EANcode
187942187959187966187973187980188017188024188031188048188055
Weightin kg
per 100
361,13410,87460,69510,51560,34361,13410,87460,69510,52560,34
Distance for punch holes 11x30 mm.The continuous perforation of the side rails allows the installation of additional rungs, e.g. alternately,for double-sided occupancy.
Rungs for Vertical Cable LadderC-profile 2986 (40x22x2 mm)
for additional requirementsUsed for: vertical cable ladder STUC 45/...
Corresponding U-clamps (BU... and BUK...) are listed in the KI catalogue.
SPCKL 86/200 S
200 1,75 2 FLM 8X16 F, 2 UGM 8 FSPCKL 86/300 S 300 1,75 2 FLM 8X16 F, 2 UGM 8 FSPCKL 86/400 S 400 1,75 2 FLM 8X16 F, 2 UGM 8 FSPCKL 86/500 S 500 1,75 2 FLM 8X16 F, 2 UGM 8 FSPCKL 86/600 S 600 1,75 2 FLM 8X16 F, 2 UGM 8 F
NNNNN
S
SSSS
Model No. WidthB
Admis-sible load
F
Incl. accessories
mm kN
Smallestpackaging
unit
1 pc.1 pc.1 pc.1 pc.1 pc.
EANcode
187874187881187898187911187928
Weightin kg
per 100
35,5550,5065,4580,4095,34
Longitudinal Connector
Used for:
VB 6040
4 FLM 10X25 FF
Model No. Incl. accessories
Smallestpackaging
unit
10 pcs.
EANcode
891788
Weightin kg
per 100
pc.
61,2
Three-sided slotted hole arrangement 11x18 mm in profile
m
pcs.