Embed Size (px)
Citation preview
StructureScan® HD LSS-2 Product Brief
Lucas Steward, Product Manager
February 2012
External version
2
StructureScan® HD Greater Definition
More Range
3
Comparison StructureScan® HD LSS-2
More Detail
Less Detail StructureScan® LSS-1
Improved
Range
Less
Range
Company Confidential 4
StructureScan® HD
Improved
range shows
dam flood
gates at 300+
feet
Dedicated
DownScan
elements show
fish holding next
to the buoy
anchor line.
Company Confidential 5
StructureScan® HD
High definition detail of concrete pattern of launch ramp Chunk rock next to boat ramp
Company Confidential 6
StructureScan® HD
Bait Fish
Bait Fish
Bait Fish
Laydown
w/rocks
Company Confidential 7
StructureScan® HD + StructureMap
StructureMap
Saved Mode
in 3D with
Navionics
Platinum-
Miami Marina
Break Wall
StructureMap
Saved Mode
in 3D with
Navionics
Platinum-
Rounding a
point
StructureMap
Saved Mode
in 3D with
Navionics
Platinum-
Approaching
bottom change
StructureMap
Live Mode in
3D with
Navionics
Platinum-
Scanning
Shoreline
Company Confidential 8
StructureScan® HD + StructureMap
StructureMap
live mode of
Seawall using
Navionics
Platinum
4 Pane Split
Gen 2
StructureMap
live mode of
definition in
sandy area
4 Pane Split
Gen 2
Company Confidential 9
StructureScan® HD on Simrad NSS
Right
only view
of Pylon
above
Dock
Pylon
Eroded
Concrete
Slab
Seawall
Corner Dock
Pylon
Company Confidential 10
StructureScan® HD on Simrad NSS
228 Ft. to
right in 20
ft.. depth
Bottom
Transition
Bottom
Changes
Small
Channel
Company Confidential 11
StructureScan® HD • In the past boaters and anglers had to choose between
further range with less resolution or less range with better resolution- NOT ANYMORE – With a single frequency StructureScan® HD can ranger further with better
resolution than ever before! • Example: The original Structure Scan(LSS-1) in 10 ft.. of water could cover 60 ft.. to each side-
now you can cover 120ft!
• The new SideScan max range is 600 ft.. over the previous 500 ft.. max.
– Deep water fishermen will see the most improvement in definition . We were able to improve our max depth and range of the LSS-1 and DOUBLED the definition in water over 50ft.
How we improved the range and resolution-
• To get better resolution- – Narrower slice of the water column
• Front to back slice is 3.2 degrees vs. 6 degrees of LSS-1(@455kHz -10 db.)
– To narrow the beam angle the transducer length was increased
• To get more range- – Use only the lower frequency and modified the hardware inside the
module.
LSS-1
LSS-2 HD
Company Confidential 12
StructureScan® HD
Company Confidential 13
StructureScan® HD
What makes our scanning system the best- • We are the only solution with TRUE DownScan combined with SideScan
– Our transducer has dedicated DownScan elements that look directly below the boat
• The competition makes you choose between a Side Imaging system or a Down Imaging system- you get the best of both with StructureScan™HD
– Two transducer system
• We don’t combine our 83/200 kHz into the Structure Scan transducer because most boats mount the 83/200 kHz transducer where it can perform best at high speeds. This flexibility allows StructureScan® transducer to be mounted at a higher location to protect it from debris.
• We include everything you need for a typical install. To make the competition’s product perform at high speed you need to mount the transducer in harms way or PURCHASE an additional 83/200 kHz transducer PLUS a “Y” cable. (This is an extra $75-$100 expense)
Company Confidential 14
StructureScan® HD
Network advantage • The StructureScan® HD module is a 3 device
Ethernet Hub – It comes with everything needed to connect one display.
To add another display to the network purchase an Ethernet cable and plug one end into the display and the other into the module and your done!
– The Hub shares multiple types of data
• StructureScan® HD sonar data
• 83/200kHz and 50/200kHz sonar data
– You can view a transducer connected to another display by selecting the sonar source or share a single transducer between 2 displays
• Synchronizes waypoints
– Not only does it add new waypoints like many competitors but also allows for editing and deletion of the waypoint database
LSS-2
HD
Company Confidential 15
StructureScan® HD
Compatible with-
LOWRANCE
– HDS Gen 1 and Gen2 • HDS Gen 2 provide StructureMap® capability
SIMRAD
– Works with NSE, NSO, and NSS systems
B&G
– Zeus
16
Transition
Thru hull transducer information will
be available March 15th.
17
Transition Dates
LSS-2 StructureScan®HD Launch Dates
Open order book: February 21st
Sales bulletin: February 21st
Product Brief: February 21st
Consumer launch and website go live: March 15th
Commercial ship: April 1st
LSS-1 StructureScan® EOL Dates
Last day to place orders: February 21st
Last ship date: February 29th
Company Confidential 18
Options & Accessories
Transducer Accessories
Part Number Description Notes
TBD FAIRING BLOCK FOR LSS HD BRONZE TRANDUCER
TBD LSS-2 HD Y CABLE FOR 2 TRANSDUCERS
TBD LSS-1 XDCR TO LSS-2 MODULE ADAPTOR Inline adaptor cable
000-10874-001 LSS-2 Skimmer Mount Bracket Stainless mount
000-00099-006 10ft Transducer Extension Cable 10 ft. extension cable
Part Number Description Notes
000-0127-54 LSS-2 HD 6 ft. Power Cable
000-0127-51 6ft Ethernet Cable
000-0127-29 15 Ft. Ethernet Cable
000-0127-28 25 Ft. Ethernet Cable
Module Accessories
Transducers Part Number Description Notes
000-10802-001 STRUCTURE SCAN HD SKIMMER XDCR LSS-2 20 Ft.. cable
TBD PLASTIC THRU-HULL XDCR LSS HD 30 Ft. Cable
TBD BRONZE THRU-HULL XDCR STRUCTURE SCAN HD 30 Ft. Cable
TBD DUAL BRONZE XDCR KIT W/ Y CABLE LSS HD 30 Ft. Cable
Company Confidential 19
Technical Specifications Power Requirement 12 Volts
Voltage Input 10V-17V
Transmit Power WRMS: 500W
WPK: 4000W
Current Drain Max: .75A Typical: .60A Inrush: 4.7A pk
Fuse Type External: 3A Fast Acting Automotive Blade
Transducer Cable 20 feet (6m)
Target Separation 1.5" (38.1mm)
Transducer Frequency 455kHz
Communication Ethernet
Shared Devices Supported StructureScan can share up to 3 Devices, add NEP-1 for further expansion
SideScan Imaging Specifications
Max Range 600ft-300 per side
Max Speed 35 mph (56 kmh)
Mark Objects 15 mph (24 kmh)
Optimum Speed 2-8 mph
DownScan Imaging Specifications
Max Depth 300ft
Max Speed 55 mph (88 kmh)
Mark Objects 35 mph (56 kmh)
Optimum Speed 2-8 mph
20
Compatibility & Service
• An LSS-2 HD transducer will connect to a LSS-1 module and provide a big improvement in resolution and range similar to an all LSS-2 system but not quite as much detail and range.
• To use LSS-1 transducers there is an adaptor cable to work with the LSS-2 module. This will give similar performance to the LSS-1 performance.
Company Confidential 21
Skimmer Transducer Mounting
Jack Plate Mount
Step Plate Mount
Transom Mount
Company Confidential 22
Dimension Drawings
Company Confidential © 2009 Navico Holding AS
Page
23
What’s in the box: 000-10800-001
(10’ transducer
extension cable
accessory)
(trolling motor
bracket
accessory)
StructureScan™ HD Module
• 000-10801-001
LSS-2 HD Transom Transducer
• 000-10802-001
Transom Transducer Bracket
• 000-10874-001
Power cable
000-0127-54
15 ft.. Ethernet Cable
• The module only sku 000-10800-001 includes all of the following except transducer and transducer bracket
Company Confidential 24
StructureScan™HD Contacts
For further information
• Product Line Director: Greg Konig [email protected]
• Product Manager: Lucas Steward [email protected]
• Program/Project Manager: Kent Jopling [email protected]
• Global Marketing Lead: Daren Cole [email protected]
