For more information please visit our website at www.OrbusNeich.com or contact us:

©2018 OrbusNeich Medical. All rights reserved.The listed catalog numbers are not available for sale in the USA.#G-70-0547 Rev02

Ordering Information NewSizes

15515-015-41520-015-41

-530-015-41

-540-015-41

-550-015-41

-560-015-41

20515-020-41520-020-41525-020-41530-020-41535-020-41540-020-41545-020-41550-020-41555-020-41560-020-41

40515-040-41520-040-41525-040-41530-040-41535-040-41540-040-41545-040-41550-040-41555-040-41560-040-41

80515-080-41520-080-41525-080-41530-080-41535-080-41540-080-41545-080-41550-080-41555-080-41560-080-41

120515-120-41520-120-41525-120-41530-120-41535-120-41540-120-41545-120-41550-120-41555-120-41560-120-41

180515-180-41520-180-41525-180-41530-180-41535-180-41540-180-41

-550-180-41

-560-180-41

240515-240-41520-240-41525-240-41530-240-41535-240-41540-240-41

-550-240-41

-550-240-41

Balloon Working Length (mm)

1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0Pressure atm (kPa) Balloon Diameter (mm)

Compliance Chart

*Nominal Pressure. The nominal in vitro device specifications do not take into account any lesion resistance.**Rated Burst Pressure - Do Not Exceed（1.5-4.0mm: 22atm, 4.5-5.0mm: 20atm, 5.5-6.0mm:18atm）

*Available only in selected countries. Please contact our local sales representative for further information.

1.52.02.53.03.5*4.04.5*5.05.5*6.0

Balloon Diameter (mm)

NOM*

RBP**

1.411.431.451.471.481.501.521.531.551.571.591.601.62

1.881.901.931.951.982.002.022.052.072.102.122.142.17

2.372.402.422.452.472.502.532.552.582.602.632.652.68

2.822.862.892.932.963.003.043.073.113.143.183.223.25

3.273.323.363.413.453.503.553.593.643.683.733.783.82

3.703.763.823.883.944.004.064.124.184.244.304.364.42

4.224.274.334.394.444.504.564.614.674.734.784.84

–

4.674.744.804.874.935.005.075.135.205.265.335.40

–

5.095.175.265.345.425.505.585.665.745.835.91

––

5.605.685.765.845.926.006.086.166.246.326.40

––

2468101214161820222426

(203)(405)(608)(811)(1013)(1216)(1419)1621)(1824)(2027)(2229)(2432)(2634

0.014” GW

JADE and OrbusNeich are Registered Trademarks of OrbusNeich Medical, Inc. All data and photos on file. Illustrations are not to be considered as engineering drawings or photos.

Optimal Combination of Robustness and Superb Deliverability

PERIPHERAL BALLOON

180 mm & 240 mmballoon length

NOWAVAILABLE!

* Only for Belgium, Denmark, France, Germany, Ireland, Netherlands, Norway, Sweden and UK

EMEA HEADQUARTERSDrs. W. van Royenstraat 5 3871 AN HoevelakenThe NetherlandsPhone +31.33.254.1150 Toll Free Phone 00800.0254.1150*

Catheter Working Length 150cm

Distal Shaft: 3.3F for 1.5-2.5mm 3.7F for 3.0-3.5mm 4.2F for 4.0-6.0mm

Proximal Shaft: 2.8F for 1.5-2.5mm 3.3F for 3.0-3.5mm 4.0F for 4.0-6.0mm

Transition ZoneRx Port

Depth Markers

Hub

Guidewire Lumen Length 60cm

Technical Specifications

Proximal Shaft

Distal Shaft

Catheter Type

Catheter Working Length

Tip Length

Guidewire System (GW)

Marker Bands

Nominal Pressure

Rated Burst Pressure

Coating

Minimum Sheath Size

2.8F (1.5-2.5mm); 3.3F (3.0-3.5mm); 4.0F (4.0-6.0mm)

3.3F (1.5-2.5mm); 3.7F (3.0-3.5mm); 4.2F (4.0-6.0mm)

Hybrid RX/OTW

150cm

3.0mm (1.5-3.0mm); 4.0mm (3.5-4.5mm); 5.0mm (5.0-6.0mm)

0.014”

2 marker bands for 15-120cm; 4 marker bands for 180 & 240cm

12atm

22atm (1.5-4.0mm); 20atm (4.5-5.0mm); 18atm (5.5-6.0mm)

Hydrophilic (distal shaft); Silicone (guidewire lumen)

4F (1.5-3.5mm); 5F (4.0-6.0mm)

True Non-compliance

for the t reatment of per iphera l ar ter ia l s tenos is

Balloon Diameter (mm)

Competitor Compliances Comparison for BTK* (2.0mm)

1.90

1.95

2.00

2.05

2.10

2.15

2.20

2.25

6 8 10 12 14 16 18 20 22 24 26

* Based on respective competitor balloons growth rate from NOM to RBP

Pressure (atm)

Bandicoot RX Coyote ES SHIDEN Amphirion Plus JADE

Strength and precision without compromising deliverability

Z-tip technology formanaging challenging lesions

Hybrid RX/OTW catheter design gives extra pushability for very distal lesions

High burst pressure 22 RBP for opening resistant lesions