Streater Store Fixtures - kraemerwoodcraft.comkraemerwoodcraft.com/pages/wp-content/uploads/2014/10/Streater... · 5/2 Kraemer Woodcraft Ltd. 11 Henry Street West, Box 510 [email protected]

Streater

Store

Fixtures

Metal Shelving System

5/2

Kraemer Woodcraft Ltd. 11 Henry Street West, Box 510 St. Jacobs, ON N0B 2N0 Tel 519-664-2221 Fax 519-664-2105

[email protected] www.kraemerwoodcraft.com

Terms & Conditions

Applicable taxes are extra on all prices

Prices are subject to change without notice and will be invoiced at the price in effect at the time of order

Volume discounts are available on most items

Faxed or emailed order confirmations are encouraged

Payment is required on all first-time orders before shipment

We accept Visa, MasterCard, Debit, Cheque, or Cash

Accounts are strictly Net 30 Days upon approved credit

To establish an account, please ask for our credit application form and fill it out and return it

We reserve the right to request a deposit on all larger and/or custom orders

A 15% re-stocking charge applies to all returns

All acrylics, custom orders, and “Clearance” items are non-returnable

Shipping

All orders are shipped F.O.B. St. Jacobs, Ontario

Most small shipments will be sent via Canpar and large shipments will be sent via common carrier unless otherwise specified

Shipping charges will be added to the invoice amount unless order is shipped

collect

Shipping dates are based on prompt receipt of necessary information

5/3



Table of Contents

Product Description Page

Terms & Conditions .......................................................................................... 2

Table of Contents ............................................................................................. 3

Gondola & Caster Assemblies ............................................................................ 4

Exploded Gondola & Wall Unit Views ................................................................... 5

Feature End Frames w/Contour End Bases .......................................................... 6

Feature End Frame Back Panels ......................................................................... 7

Uprights With Levellers ..................................................................................... 8

Bottom Arms & Base Decks ............................................................................... 9

Cross Components ......................................................................................... 10

Base Deck Components .................................................................................. 11

Back Panels ................................................................................................... 12

Extension Back Panels & H-Channels ................................................................ 13

Standard & Heavy Duty Metal Shelves .............................................................. 14

Wire Shelving ................................................................................................ 15

Accessories ................................................................................................... 16

5/4



Gondolas & Wall Units

Full Gondolas

Half Gondolas & Wall Units

Full Gondola With Levellers

NP Grey Colour

Kick Plate and Bottom Arms

- Dark Bronze (13)

Specify Back Panels When Ordering

(Page 5/12)

2 Back Panels Per Module

Order Shelves Separately

Order One Starter Module for Each

Continuous Run

Order Add-ons for All Remaining Modules

12”, 14”

16”, 18”

22”, 28”

7.18”

56”

61”

71”

86” 96”

Half Gondola With Levellers

NP Grey Colour

Kick Plate and Bottom Arms

- Dark Bronze (13)

Specify Back Panels When Ordering

(Page 5/12)

1 or 2 Back Panels Per Module

Optional Flush Bottom Cover for Back Side


Order One Starter Module for Each

Continuous Run

Order Add-ons for All Remaining Modules

2-1/2”Dp Upright

Caster Assemblies

Expands to Fit 36”- 48” Modules

2” Dia. Caster

12 Gauge Steel Support

Order as 2-Piece Half Gondola Kit or 3-Piece Full

Gondola Kit

5/5



Exploded Gondolas & Wall Units

Half Gondola & Wall Unit Profile

Full Gondola Profile

Basic Gondola & Wall Unit Kit

Contents

1. 2-1/2” End Upright

- two per starter module

2. 2-1/2” Centre Upright

- one per add-on module

3. Top Cap

- one per module

4. Tie Bar

- one per 56” thru 96” height

- two per module for heights

over 96”

5. Cross Tie

- one per module

6. End Bottom Arm

- one pair per half starter module

- two pair per full starter module

7. Centre Bottom Arm

- one per half add-on module

- two per full add-on module

8. Base Deck

- one per half module

- two per full module

9. Floating Kick Plate

- one per half module

- two per full module

10. 1/4” Back Panel - Perf or Solid

- specify quantity when ordering

- optional Slatwall Back Panel

* All Gondolas & Wall Units Feature Assembly With No Bolts Required

5/6



Feature End Frames w/Contour End Bases

Feature End Frame With Contour End Base

Feature End Frame

Used at the End of a Run With

or Without a Contour End Base

All Feature Ends Come With

Complete Hardware Kit (see Page 5/8)

Special 90-degree T-Brace is

Needed When Feature End is Lower Than Full Gondola


1 Back Panel Per Feature End

NP Grey is Standard Colour

Also Available With Red Frame

and White Back Panel

Part # Size

01801-3091 36” x 56”

01801-2818 36” X 61”

01801-3094 36” x 71”

01801-3095 36” x 86”

01801-3084 48” x 61”

01801-3086 48” x 71”

Contour End Base

Used at the End of a Run

NP Grey Colour

Toekick - Dark Bronze (13)

Part # Size

00644-0581 (Fits 16/16) 18” x 34”

00644-0589 (Fits 18/18) 18” x 38”

00644-0605 (Fits 22/22) 18” x 46”

19”

16.5”

36” & 48”

5/7



Feature End Frame Back Panels

Feature End Frame Back Panels

Solid Back Panel

- 1/4” Hardboard - Painted 2 Faces Bakes Enamel

Pegboard Back Panel

- 1/4” Hardboard - 1/4” Perforations Spaced 1” O.C. - Painted 2 Faces Baked Enamel

Slatwall Back Panel

- 3/4” MDF, Melamine, or Laminate Finish

- T-Slots are Spaced 3” O.C. - Also Available With Steel T-Slot Inserts - Specify Colour

Solid Back Panel

Part # Size

08583-3656 36” x 56”

08583-3661 36” x 61”

08583-3671 36” x 71”

08583-3686 36” x 86”

08583-4856 48” x 56”

08583-4861 48” x 61”

08583-4871 48” x 71”

08583-4886 48” x 86”

Pegboard Back Panel

Part # Size

08582-3656 36” x 56”

08582-3661 36” x 61”

08582-3671 36” x 71”

08582-3686 36” x 86”

08582-4856 48” x 56”

08582-4861 48” x 61”

08582-4871 48” x 71”

08582-4886 48” x 86”

Slatwall Back Panel

Part # Size

* Special Order

Feature End Frame Hardware Kit

Used to Secure Feature End Frame to End of Run

90-degree T-Brace is Used With Feature End

Frame That is Shorter Than the Height of the Run

5/8



Uprights With Levellers

Part # Size

L8403-0062 56”

L8403-0061 61”

L8403-4402 71”

L8403-0058 86”

L8403-0056 96”

L8712-2117 (Heavy Duty) 96”

Part # Size

L8712-0035 56”

L8712-0034 61”

L8712-0032 71”

L8712-0031 86”

L8712-0029 96”

L8712-2150 (Heavy Duty) 96”

Part # Size

08800-0505 10”

08800-0506 15”

08800-0508 25”

08800-0510 35”

08800-0513 50”

End Upright w/Leveller

Used at Ends of Each Run of

Fixtures

56”, 61”, 71”, 86”, & 96”

Lengths

NP Grey Colour

Centre Upright w/Leveller

Used in Every Add-on Unit in a

Run of Fixtures

56”, 61”, 71”, 86”, & 96”

Lengths

NP Grey Colour

End Extension Post

For Adding Height to Existing

Gondolas and Wallcases

Back Panels Sold Separately

(See Page 5/13)

Order 2 End Extension Posts to

Assemble a Centre Extension Post

10”, 15”, 25”, 35”, & 50”

Lengths

NP Grey Colour

5/9



Bottom Arms & Decks

End Bottom Arm w/Leveller

Used With End Uprights

Indicate Left or Right Hand

Dark Bronze (13) Colour

12”, 14”, 16”, 18”, 22”, & 28”

Part # Size

L8704-1545 12”

L8704-1546 14”

L8704-1547 16”

L8704-1548 18”

L8704-1550 22”

L8704-1553 28”

Centre Bottom Arm w/Leveller

Used With Centre Uprights

Any Colour

12”, 14”, 16”, 18”, 22”, & 28”

Part # Size

L8704-1521 12”

L8704-1522 14”

L8704-1523 16”

L8704-1524 18”

L8704-1526 22”

L8704-1529 28”

Deck

Recommended Evenly

Distributed Load Capacity: 600 lbs. - 12” thru 22” 800 lbs. - 24” thru 28”

Formed Tag Moulding on

Front Edge

Double Row Perforations

Front and Rear

Part # Size

01200-1236 12” x 36”

01200-1436 14” x 36”

01200-1636 16” x 36”

01200-1836 18” x 36”

01200-2236 22” x 36”

01200-2836 28” x 36”

01200-1248 12” x 48”

01200-1448 14” x 48”

01200-1648 16” x 48”

01200-1848 18” x 48”

01200-2248 22” x 48”

01200-2848 28” x 48”

5/10



Cross Components

Top Cap

Used to Cover Top Edge of

Back Panel

Fits Into Uprights

NP Grey Colour

Replacement Top Cap

Needed to Replace Top Cap

When Using Extensions With Open Backs

NP Grey Colour

Part # Size

08403-0207 36”

08403-0206 48”

Part # Size

08403-0085 36”

08403-0084 48”

Part # Size

08709-1298 36”

08709-1299 48”

Part # Size

08403-0213 36”

08403-0212 48”

Part # Size

08707-0031 36”

08707-0032 48”

Tie Bar

Used in Gondola and Wall

Units at 56” and Higher

Any Colour

Cross Tie

Used in Gondola and Wall

Units to Retain Panel

NP Grey Colour

Slatwall Tie Bar

Needed to Replace Standard

Tie Bar When Unit Has Slatwall Back Panels

Any Colour

5/11



Base Components

Floating Kickplate

Snaps Into Bottom Arms


Part # Size

08403-6550 36”

08403-6551 48”

Electrical Floating Kickplate

Snaps Into Bottom Arms

Has Knockout for Electrical

Hook-Up


Part # Size

Special Order Only 36”

08403-6773 48”

Flush Base

Finishes Off Units Without

Base Decks


Part # Size

08704-0002 36”

08704-0001 48”

5/12



Back Panels

Back Panels

Solid Back Panel

- 1/4” Hardboard - Painted 1 Face Baked Enamel

Pegboard Back Panel

- 1/4” Hardboard - 1/4” Perforations Spaced 1” O.C. - Painted 1 Face Baked Enamel

Slatwall Back Panel



Solid Back Panel

Part # Size

08507-1224 36” x 56”

08507-1225 36” x 61”

08507-1227 36” x 71”

08507-1228 36” x 86”

08507-1230 36” x 96”

08507-1234 48” x 56”

08507-1235 48” x 61”

08507-1237 48” x 71”

08507-1238 48” x 86”

08507-1240 48” x 96”

Pegboard Back Panel

Part # Size

08507-1324 36” x 56”

08507-1325 36” x 61”

08507-1327 36” x 71”

08507-1328 36” x 86”

08507-1330 36” x 96”

08507-1334 48” x 56”

08507-1335 48” x 61”

08507-1337 48” x 71”

08507-1338 48” x 86”

08507-1340 48” x 96”

Slatwall Back Panel

Part # Size

* Special Order Only

5/13



Extension Back Panels & H-Channel

Extension Back Panels

Solid Back Panel

- 1/4” Hardboard - Painted 1 Face Baked Enamel

Pegboard Back Panel

- 1/4” Hardboard - 1/4” Perforations Spaced 1” O.C. - Painted 1 Face Baked Enamel

Slatwall Back Panel



Solid Back Panel

Part # Size


Pegboard Back Panel

Part # Size

08507-X1036 36” x 10”

08507-X1536 36” x 15”

08507-X2536 36” x 25”

08507-X3536 36” x 35”

08507-X5036 36” x 50”

08507-X1048 48” x 10”

08507-X1548 48” x 15”

08507-X2548 48” x 25”

08507-X3548 48” x 35”

08507-X5048 48” x 50”

Slatwall Back Panel

Part # Size


H-Channel

Used to Join 2-Piece Back

Panels

Available in Clear Plastic

Part # Size

08515-0587 36”

08515-0588 48”

5/14



Standard & Heavy Duty Shelves

Part # Size

01256-1036 10” x 36”

01256-1236 12” x 36”

01256-1436 14” x 36”

01256-1636 16” x 36”

01256-1836 18” x 36”

01256-2036 20” x 36”

01256-2236 22” x 36”

01256-1048 10” x 48”

01256-1248 12” x 48”

01256-1448 14” x 48”

01256-1648 16” x 48”

01256-1848 18” x 48”

01256-2048 20” x 48”

01256-2248 22” x 48”

Standard 4-Position Shelf

One-Piece Shelf Pan With 1-1/4” Ticket Moulding

Four-Position Brackets - 12-Degree Upslant, Level,

15-Degree, & 30-Degree Downslant

1/2” Double Row Perforations 1” O. C. Front & Rear

Textured Steel, NP Grey Colour

Must be Ordered in Quantities of 4

Load Limits

Depth Width Weight

10” 36” & 48” 400 lbs.

12” 36” & 48” 500 lbs.

14” 36” & 48” 500 lbs.

16” 36” & 48” 500 lbs.

18” 36” & 48” 500 lbs.

20” 36” & 48” 400 lbs.

22” 36” & 48” 350 lbs.

* Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce capacities by 30% if only the front of the shelf is to be loaded.

Heavy Duty 2-Position Shelf

One-Piece Shelf Pan With 1-1/4” Ticket Moulding

Two-Position Brackets - Level, 20 Degree Downslant

1/2” Double Row Perforations 1” O. C. Front & Rear

Textured Steel, NP Grey Colour

Must be Ordered in Quantities of 2

Part # Size

01347-2236 22” x 36”

01347-2248 22” x 48”

Load Limits

Depth Width Weight

22” 36” & 48” 600 lbs.

* Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce weight by 30% if only the front of the shelf is to be loaded.

5/15



Wire Shelving

Wire Basket

Silvervein Finish

With Front Ticket Moulding

Brackets Extra

Part # Size

8929-948 (Basket) 12” x 48”

8929-957 (Basket) 14” x 48”

8929-966 (Basket) 16” x 48”

8930-240 (Divider) 6” x 12”

8930-259 (Divider) 6” x 14”

8930-268 (Divider) 6” x 16”

Wire Shelf

Silvervein Finish

With Front Ticket Moulding

Brackets Extra

Part # Size

8929-831 (Shelf) 12” x 48”

8929-840 (Shelf) 14” x 48”

8929-859 (Shelf) 16” x 48”

8930-400 (Divider) 2-1/2” x 12”

8930-419 (Divider) 2-1/2” x 14”

8930-428 (Divider) 2-1/2” x 16”

Wire Fence Divider System

Silvervein Finish

Available in 2-1/2” Heights

Part # Size

8930-534 (Fence) 2-1/2” x 36”

8930-561 (Fence) 2-1/2” x 48”

8930-687 (Divider) 2-1/2” x 12”

8930-696 (Divider) 2-1/2” x 14”

8930-703 (Divider) 2-1/2” x 16”

Wire Basket Divider

Wire Basket

12” 14” 16”

48”

6”

48”

12” 14” 16”

Wire Shelf

Wire Shelf Divider

2-1/2”

Cross Divider 12”, 14”, 16”

Front to Back Divider 12”, 14”, 16”

Front or Back Fence 36”, 48”

5/16



Accessories

Heavy Duty Wallmount Standard

U-Channel Standards Attach to

Wall

Identical Slotting as Regular

Uprights

With Grooves for Back Panels

NP Grey Colour

Part # Size

01600-0014 96”

Hangrod Assembly

Brackets in 12” Depths

NP Grey Colour

1-1/4” Chrome-Plated Rod With

End Caps

Part # Size

01602-0075R/L (Brackets) 12”

01602-0076R/L (Brackets) 14”

Special Order Only 36”

08301-0310 (Hangrod) 48”

Standard Wall Tie Bracket

Grips the Vertical Edge of Upright

and is Fastened to the Wall

12 Gauge Steel

Zinc Finish

Fasteners Not Included

Part # Size

08403-0789 N/A

Top Cap Anchor Bracket

Anchor Grips Wallcase Top Cap &

is Fastened to the Wall

Zinc Finish

Fasteners Not Included

Part # Size

08403-2001 N/A

Cover Plate

Vinyl Cover Plate Plugs Hole in

Top Cap

Receives Stem of Sign Holder

Part # Size

08709-0337 N/A

Leveller

Used to Level Shelving Units

Part #

08308-0164 (Leveller)

08308-0237 (J-Nut Retainer)

Documents

Streater Store Fixtures - kraemerwoodcraft.comkraemerwoodcraft.com/pages/wp-content/uploads/2014/10/Streater... · 5/2 Kraemer Woodcraft Ltd. 11 Henry Street West, Box 510 [email protected]