Embed Size (px)
Citation preview
STRAINERS
www.andrex-vg.com
1
TYPE
DESCRIPTION NOMINAL
PRESSURE TEMPERATURE DIAMETER STANDARD PAGE
V-711 T-TYPE STRAINER PN6-PN40 up to 530°C DN15-DN300 PN-EN 2-3
V-714 Y-TYPE STRAINER PN6-PN40 up to 530°C DN15-DN200 PN-EN 4-5
V-POB40 T-TYPE STRAINER
ACID-PROOF PN6-PN40 up to 550°C DN15-DN300 PN-EN 6-7
V-PZB40 Y-TYPE STRAINER
ACID-PROOF PN6-PN40 up to 550°C DN15-DN200 PN-EN 8-9
V-021 STRAINER PN63 up to 560°C DN15-DN200 PN-EN 10-11
V-011 STRAINER PN100 up to 560°C DN15-DN200 PN-EN 12-13
V-041 STRAINER PN160 up to 560°C DN15-DN200 PN-EN 14-15
V-031S STRAINER PN250 up to 600°C DN15-DN125 PN-EN 16-17
V-061 STRAINER PN320 up to 600°C DN15-DN125 PN-EN 18-19
V-051 STRAINER PN400 up to 600°C DN15-DN125 PN-EN 20-21
www.andrex-vg.com
2
STRAINER T-type
V-711
CHARACTERISTIC: Diameter - 15 -300 mm – T-type;
Pressure - 40 bar (flanges may be drilled for PN 6, 10, 16, 25 bar);
Temperature - up to 530°C (with PTFE sealing up to ≤ 200°C);
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / others
Example: V-711 / --- / --- / ---
Example: V-711 / S / U / AT
Ends Sign Body material Sign Others Sign
Standard – flanged --- (P250GH) C 22.8
or GP240GH ---
Standard – without drain plug ---
Butt weld ends S PTFE ring AT
Socket weld SW 16Mo3 or G20Mo5 U
NBR ring AV
Threaded G Steel ring AS
APPLICATION: Strainers are used to protect the pipeline and its equipment from impurities. T-type strainer can be
mounted only in horizontal position. The strainers can be made with drain plug for special order.
30°
60°
L
g.
Do
f
do×n
H
Dp
DN
Dz
d
Dz
Dw
Drain plug
(for order)
"S"
Drain plug
„AT” – PTFE
„AV” - NBR
DN 65 ÷ 300
Drain plug
with steel ring "AS" "G" "SW"
socket
weld
DN 15 ÷ 50
www.andrex-vg.com
3
MATERIALS:
Versions Standard U Standard U
Parts TMAX 450
OC TMAX 530
OC TMAX 450
OC TMAX 530
OC
DN 15 – 50 DN 65 - 300
Body, bonnet (P250GH) C22.8
(1.0460)
16Mo3
(1.5415)
GP240GH
(1.0619)
G20Mo5
(1.5419)
Strainer X6CrNiTi18-10 (1.4541) or X2CrNiMo17-12-2 (1.4404)
Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:
DN
Standard - flanged With butt weld ends
PN 40 PN 16
Dz Dp Do do n L g. f H Weight Dz Dp Do do n Dz Dw Weight
15 95 45 65 14 4 130 16 2 65 2,20 95 45 65 14 4 22 17 1,40
20 105 58 75 14 4 150 18 2 65 2,60 105 58 75 14 4 28 22 1,50
25 115 68 85 14 4 160 18 2 65 3,00 115 68 85 14 4 35 28,5 1,60
32 140 78 100 18 4 180 18 2 85 6,00 140 78 100 18 4 44 37 2,06
40 150 88 110 18 4 200 18 3 95 8,00 150 88 110 18 4 50 43 3,54
50 165 102 125 18 4 230 20 3 110 9,50 165 102 125 18 4 62 54 3,70
65 185 122 145 18 8 290 22 3 155 15,50 185 122 145 18 4 77 69 7,82
80 200 138 160 18 8 310 24 3 170 24,00 200 138 160 18 8 91 81 14,55
100 235 162 190 22 8 350 24 3 195 37,00 220 158 180 18 8 117 104 24,56
125 270 188 220 26 8 400 26 3 200 49,00 250 184 210 18 8 144 130,5 31,99
150 300 218 250 26 8 480 28 3 220 81,00 285 212 240 22 8 172 156,5 59,89
200 375 285 320 30 12 600 34 3 265 135,00 340 268 295 22 12 223 204,5 96,68
250 440 306 385 33 12 730 38 3 330 176,00 405 320 355 26 12 278 256,5 120,48
300 515 410 450 33 16 850 42 3 410 230,00 460 370 410 26 12 329 306,5 156,03
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C 560°°°°C
bar
(P250GH)C 22.8
(1.0460) 40 40,0 37,1 35,2 33,3 30,5 27,6 25,7 23,8 13,1 - - - - - - - -
16Mo3
(1.5415) 40 40,0 40,0 40,0 40,0 39,0 34,3 32,4 30,5 29,5 22,4 17,7 14,5 11,2 9,0 - - -
GP240GH
(1.0619) 40 40,0 37,1 35,2 33,3 30,5 27,6 25,7 23,8 13,1 - - - - - - - -
G20Mo5
(1.5419) 40 40,0 40,0 40,0 40,0 39,0 34,3 32,4 30,5 29,5 22,4 17,7 14,5 11,2 9,0 - - -
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
4
STRAINER Y-type
V-714 CHARACTERISTIC:
Diameter - 15 - 200 mm – Y-type;
Pressure - 40 bar (flanges may be drilled for PN 6, 10, 16, 25 bar);
Temperature - up to 530°C (with PTFE sealing up to ≤ 200°C);
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / others
Example: V-714 / --- / --- / ---
Example: V-714 / S / U / AT
Ends Sign Body material Sign Others Sign
Standard – flanged --- (P250GH) C 22.8
or GP240GH ---
Standard – without drain plug ---
Butt weld ends S PTFE ring AT
Socket weld SW 16Mo3 or G20Mo5 U
NBR ring AV
Threaded G Steel ring AS
APPLICATION:
Strainers are used to protect the pipeline and its equipment from impurities. Y-type strainer can be
mounted in horizontal or vertical position . The strainers can be made with drain plug for special order.
H
L
Dz
60°
30°
d
Dw
g.
f
Drain plug
(for order)
"S"
Drain plug
„AT” – PTFE
„AV” - NBR
DN 15 ÷ 50
Drain plug with
steel ring "AS" "G" "SW"
Socket
Weld
DN 65 ÷ 200
www.andrex-vg.com
5
MATERIALS:
Versions Standard U Standard U
Parts TMAX 450
OC TMAX 530
OC TMAX 450
OC TMAX 530
OC
DN 15 – 50 DN 65 - 300
Body, bonnet (P250GH) C22.8
(1.0460)
16Mo3
(1.5415)
GP240GH
(1.0619)
G20Mo5
(1.5419)
Strainer X6CrNiTi18-10 (1.4541) or X2CrNiMo17-12-2 (1.4404)
Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:
DN
Standard – flanged With butt weld ends
PN 40 PN 16
Dz Dp Do do n L g. f H Weight Dz Dp Do do n Dz Dw Weight
15 95 45 65 14 4 130 16 2 90 2,20 95 45 65 14 4 22 17 1,40
20 105 58 75 14 4 150 18 2 97 2,60 105 58 75 14 4 28 22 1,50
25 115 68 85 14 4 160 18 2 97 3,00 115 68 85 14 4 35 28,5 1,60
32 140 78 100 18 4 180 18 2 124 6,00 140 78 100 18 4 44 37 2,06
40 150 88 110 18 4 200 18 3 134 8,00 150 88 110 18 4 50 43 3,54
50 165 102 125 18 4 230 20 3 145 9,50 165 102 125 18 4 62 54 3,70
65 185 122 145 18 8 290 22 3 180 15,50 185 122 145 18 4 77 69 7,82
80 200 138 160 18 8 310 24 3 215 24,00 200 138 160 18 8 91 81 14,55
100 235 162 190 22 8 350 24 3 235 37,00 220 158 180 18 8 117 104 24,56
125 270 188 220 26 8 400 26 3 280 49,00 250 184 210 18 8 144 130,5 31,99
150 300 218 250 26 8 480 28 3 320 81,00 285 212 240 22 8 172 156,5 59,89
200 375 285 320 30 12 600 34 3 445 135,00 340 268 295 22 12 223 204,5 96,68
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C 560°°°°C
bar
(P250GH)C 22.8
(1.0460) 40 40,0 37,1 35,2 33,3 30,5 27,6 25,7 23,8 13,1 - - - - - - - -
16Mo3
(1.5415) 40 40,0 40,0 40,0 40,0 39,0 34,3 32,4 30,5 29,5 22,4 17,7 14,5 11,2 9,0 - - -
GP240GH
(1.0619) 40 40,0 37,1 35,2 33,3 30,5 27,6 25,7 23,8 13,1 - - - - - - - -
G20Mo5
(1.5419) 40 40,0 40,0 40,0 40,0 39,0 34,3 32,4 30,5 29,5 22,4 17,7 14,5 11,2 9,0 - - -
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
6
L
f
do×n
g.
Do
H
Dp
DzDN
30°
60°
Dz
Dw
STRAINER T-type
ACID-PROOF V-POB40
CHARACTERISTIC: Diameter - 15 -300 mm ;
Pressure - 40 bar (flanges may be drilled for PN 6, 10, 16, 25 bar);
Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 550°C for non-toxic media; (with PTFE sealing up to 200°C);
Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.
VERSIONS: type - body material / ends / others
Example: V-POB40 / --- / ---
Example: V-POA40/ S / AT
Type - body material Sign Ends Sign Others Sign
X6CrNi18-10
or GX5CrNi19-10 V-POB40
Standard - flanged --- Stadard – without drain plug ---
Butt weld ends S PTFE ring AT
X2CrNiMo17-12-2
or GX5CrNiMo19-11-2 V-POA40
Socket weld SW NBR ring AV
Threaded G Steel ring AS
APPLICATION: Strainers are used to protect the pipeline and its equipment from impurities. T-type strainer can be
mounted only in horizontal position. The strainers can be made with drain plug for special order.
Drain plug
(in order)
"S"
Drain plug
„AT” – PTFE
„AV” - NBR
DN 65 ÷ 300
Drain plug with
steel ring "AS" "G" "SW"
Socket
weld
DN 15 ÷ 50
www.andrex-vg.com
7
MATERIALS:
Versions V-POB40 V-POA40 V-POB40 V-POA40
Parts DN 15 – 50 DN 65 - 300
Body , bonnet X6CrNiTi18-10
(1.4541)
X2CrNiMo17-12-2
(1.4404)
GX5CrNi19-10
(1.4308)
GX5CrNiMo19-11-2
(1.4408)
Strainer X6CrNiTi18-10 (1.4541) lub X2CrNiMo17-12-2 (1.4404)
Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:
DN
Standard – flanged With butt weld ends
PN 40 PN 16
Dz Dp Do do n L g. f H Weight Dz Dp Do do n Dz Dw Weight
15 95 45 65 14 4 130 16 2 65 2,20 95 45 65 14 4 22 17 1,40
20 105 58 75 14 4 150 18 2 65 2,60 105 58 75 14 4 28 22 1,50
25 115 68 85 14 4 160 18 2 65 3,00 115 68 85 14 4 35 28,5 1,60
32 140 78 100 18 4 180 18 2 85 6,00 140 78 100 18 4 44 37 2,06
40 150 88 110 18 4 200 18 3 95 8,00 150 88 110 18 4 50 43 3,54
50 165 102 125 18 4 230 20 3 110 9,50 165 102 125 18 4 62 54 3,70
65 185 122 145 18 8 290 22 3 155 15,50 185 122 145 18 4 77 69 7,82
80 200 138 160 18 8 310 24 3 170 24,00 200 138 160 18 8 91 81 14,55
100 235 162 190 22 8 350 24 3 195 37,00 220 158 180 18 8 117 104 24,56
125 270 188 220 26 8 400 26 3 200 49,00 250 184 210 18 8 144 130,5 31,99
150 300 218 250 26 8 480 28 3 220 81,00 285 212 240 22 8 172 156,5 59,89
200 375 285 320 30 12 600 34 3 265 135,00 340 268 295 22 12 223 204,5 96,68
250 440 306 385 33 12 730 38 3 330 176,00 405 320 355 26 12 278 256,5 120,48
300 515 410 450 33 16 850 42 3 410 230,00 460 370 410 26 12 329 306,5 156,03
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material Medium PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C
bar
X6CrNiTi18-10
(1.4541) aggressive
media
40 40,0 39,6 37,3 35,4 33,7 - - - - - - - - - - -
GX5CrNi19-10
(1.4308) 40 40,0 36,3 32,7 29,9 27,6 - - - - - - - - - - -
X6CrNiTi18-10
(1.4541) non
aggressive
media
40 40,0 39,6 37,3 35,4 33,7 31,8 30,6 29,7 29,0 28,7 28,3 28,0 27,8 27,5 27,2 27,0
GX5CrNi19-10
(1.4308) 40 40,0 36,3 32,7 29,9 27,6 25,7 24,5 23,8 23,3 23,0 22,8 22,0 19,5 18,9 18,0 17,5
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
8
30°60°
Dw
Dz
L
Do
Dz
H
Dp
do x n
f
g.
STRAINER Y-type
ACID-PROOF V-PZB40
CHARACTERISTIC: Diameter - 15 -200 mm ;
Pressure - 40 bar (flanges may be drilled for PN 6, 10, 16, 25 bar);
Temperature - up to 250°C for acids, bases and other aggressive media;
- up to 550°C for non-toxic media; (with PTFE sealing up to 200°C);
Medium - acids, liquors, water, steam and other non-toxic and non aggressive liquid and
gas media, engine fuel.
VERSIONS: type - body material / ends / others
Example:V-PZB40 / --- / ---
Example:V-PZA40/ S / AT
Type - body material Sign Ends Sign Others Sign
X6CrNi18-10
or GX5CrNi19-10 V-PZB40
Standard - flanged --- Standard – without drain plug ---
Butt weld ends S PTFE ring AT
X2CrNiMo17-12-2
or GX5CrNiMo19-11-2 V-PZA40
Socket weld SW NBR ring AV
Threaded G Steel ring AS
APPLICATION:
Strainers are used to protect the pipeline and its equipment from impurities. T-type strainer can be
mounted only in horizontal position. The strainers can be made with drain plug for special order.
Drain plug
(for order)
"S"
Drain plug
„AT” – PTFE
„AV” - NBR
DN 65 ÷ 200
Drain plug with
steel "AS" "G" "SW"
Socket
weld
DN 15 ÷ 50
www.andrex-vg.com
9
MATERIALS:
Versions V-PZB40 V-PZA40 V-PZB40 V-PZA40
Parts DN 15 - 50 DN 65 - 200
Body , bonnet X6CrNiTi18-10
(1.4541)
X2CrNiMo17-12-2
(1.4404)
GX5CrNi19-10
(1.4308)
GX5CrNiMo19-11-2
(1.4408)
Strainer X6CrNiTi18-10 (1.4541) or X2CrNiMo17-12-2 (1.4404)
Gasket Grafit
Special materials on request; modifications reserved.
DIMENSIONS:
DN
Standard - flanged With butt weld ends
PN 40 PN 16
Dz Dp Do do n L g. f H Weight Dz Dp Do do n Dz Dw Weight
15 95 45 65 14 4 130 16 2 90 2,20 95 45 65 14 4 22 17 1,40
20 105 58 75 14 4 150 18 2 97 2,60 105 58 75 14 4 28 22 1,50
25 115 68 85 14 4 160 18 2 97 3,00 115 68 85 14 4 35 28,5 1,60
32 140 78 100 18 4 180 18 2 124 6,00 140 78 100 18 4 44 37 2,06
40 150 88 110 18 4 200 18 3 134 8,00 150 88 110 18 4 50 43 3,54
50 165 102 125 18 4 230 20 3 145 9,50 165 102 125 18 4 62 54 3,70
65 185 122 145 18 8 290 22 3 180 15,50 185 122 145 18 4 77 69 7,82
80 200 138 160 18 8 310 24 3 215 24,00 200 138 160 18 8 91 81 14,55
100 235 162 190 22 8 350 24 3 235 37,00 220 158 180 18 8 117 104 24,56
125 270 188 220 26 8 400 26 3 280 49,00 250 184 210 18 8 144 130,5 31,99
150 300 218 250 26 8 480 28 3 320 81,00 285 212 240 22 8 172 156,5 59,89
200 375 285 320 30 12 600 34 3 445 135,00 340 268 295 22 12 223 204,5 96,68
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material Medium PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C
bar
X6CrNiTi18-10
(1.4541) aggressive
media
40 40,0 39,6 37,3 35,4 33,7 - - - - - - - - - - -
GX5CrNi19-10
(1.4308) 40 40,0 36,3 32,7 29,9 27,6 - - - - - - - - - - -
X6CrNiTi18-10
(1.4541) non
aggressive
media
40 40,0 39,6 37,3 35,4 33,7 31,8 30,6 29,7 29,0 28,7 28,3 28,0 27,8 27,5 27,2 27,0
GX5CrNi19-10
(1.4308) 40 40,0 36,3 32,7 29,9 27,6 25,7 24,5 23,8 23,3 23,0 22,8 22,0 19,5 18,9 18,0 17,5
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
10
Do
do×n
f
L
H
g.
Dp
DN
Dz
d
60°
30°
Dw
Dz
STRAINER V-021
CHARACTERISTIC:
Diameter - 15 -200 mm;
Pressure - 63 bar;
Temperature - up to 560°C;
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / disc and disc ring / others
Example: V-021 / --- / --- / ---
Example: V-021 / S / U / --- / AS
Ends Sign Body material Sign Others Sign
Standard – flanged --- (P250GH) C 22.8
or GP240GH ---
Standard – without drain plug ---
Butt weld ends S
Socket weld SW 16Mo3 or G20Mo5 U With drain plug AS
Threaded G 13CrMo4-5 or G17CrMo5-5 A
APPLICATION:
Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
Socket
weld
Drain plug (for order)
"AS"
DN 50 - 200 DN 15 - 40
”S”
”SW” ”G”
www.andrex-vg.com
11
MATERIALS:
Versions Standard U A Standard U A
Parts TMAX 450
OC TMAX 530
OC TMAX 560
OC TMAX 450
OC TMAX 530
OC TMAX 550
OC
DN 15 - 40 DN 50 - 200
Body , bonnet
(P250GH)
C22.8
(1.0460)
16Mo3
(1.5415)
13CrMo4-5
(1.7335)
GP240GH
(1.0619)
G20Mo5
(1.5419)
G17CrMo5-5
(1.7357)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Standard - flanged With butt weld ends
DN d Dz Dp Do do n L g. f H Weight Dz Dw L Weight
15 14 105 45 75 14 4 210 20 2 70 4,00 22 17 160 2,70
20 19 130 58 90 18 4 230 22 2 75 6,20 28 22 160 2,70
25 23 140 68 100 22 4 230 24 2 75 8,30 35 28,5 160 2,70
32 30 155 78 110 22 4 260 24 2 95 11,50 44 36,5 230 5,20
40 38 170 88 125 22 4 260 28 3 95 14,80 50 43 230 7,70
50 45 180 102 135 22 4 300 26 3 140 15,70 62 54 300 12,90
65 62 205 122 160 22 8 340 26 3 170 37,50 77 69 340 26,30
80 73 215 138 170 22 8 380 28 3 195 40,30 91 81 380 27,50
100 94 250 162 200 22 8 430 30 3 200 54,00 117 104 430 37,20
125 120 295 188 240 26 8 500 34 3 225 76,00 144 130,5 500 48,90
150 144 345 218 290 33 8 550 36 3 300 151,00 172 156,5 550 101,10
200 195 415 285 345 36 12 650 42 3 400 215,00 223 204,5 650 135,00
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C 560°°°°C
bar
(P250GH)C 22.8
(1.0460) 63 63,0 58,5 55,5 52,5 48,0 43,5 40,5 37,5 20,7 - - - - - - - -
16Mo3
(1.5415) 63 63,0 63,0 63,0 63,0 61,5 54,0 51,0 48,0 46,5 35,3 27,9 22,8 17,7 14,1 - - -
13CrMo4-5
(1,7335) 63 63,0 63,0 63,0 63,0 63,0 62,7 60,0 57,0 54,0 46,2 41,1 34,6 28,2 23,4 18,3 14,7 12,0
GP240GH
(1.0619) 63 63,0 58,5 55,5 52,5 48,0 43,5 40,5 37,5 20,7 - - - - - - - -
G20Mo5
(1.5419) 63 63,0 63,0 63,0 63,0 61,5 54,0 51,0 48,0 46,5 35,3 27,9 22,8 17,7 14,1 - - -
G17CrMo5-5
(1.7357) 63 63,0 63,0 63,0 63,0 63,0 62,7 60,0 57,0 54,0 46,2 41,1 34,6 28,2 23,4 18,3 14,7 12,0
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
12
STRAINER V-011
CHARACTERISTIC:
Diameter - 15 -200 mm;
Pressure - 100 bar;
Temperature - up to 560°C;
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / others
Example: V-011 / --- / --- / ---
Example: V-011 / S / U / AS
Ends Sign Body material Sign Others Sign
Standard – flanged --- (P250GH) C 22.8
or GP240GH ---
Standard – without drain plug
--- Butt weld ends S
Socket weld SW 16Mo3 or G20Mo5 U With drain plug AS
Threaded G 13CrMo4-5 or G17CrMo5-5 A
APPLICATION: Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
Do
do×n
f
L
H
g.
Dp
DN
Dz
d
60°
30°
Dw
Dz
Socket
weld
Drain plug (for order)
"AS"
DN 50 - 200 DN 15 - 40
”S”
”SW” ”G”
www.andrex-vg.com
13
MATERIALS:
Versions Standard U A Standard U A
Parts TMAX 450
OC TMAX 530
OC TMAX 560
OC TMAX 450
OC TMAX 530
OC TMAX 550
OC
DN 15 - 40 DN 50 - 200
Body , bonnet
(P250GH)
C22.8
(1.0460)
16Mo3
(1.5415)
13CrMo4-5
(1.7335)
GP240GH
(1.0619)
G20Mo5
(1.5419)
G17CrMo5-5
(1.7357)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Standard - flanged With butt weld ends
DN d Dz Dp Do do n L g. f H Weight Dz Dw L Weight
15 14 105 45 75 14 4 210 20 2 70 4,00 22 17 160 2,70
20 19 130 58 90 18 4 230 22 2 75 6,20 28 21,5 160 2,70
25 23 140 68 100 22 4 230 24 2 75 8,30 35 28,5 160 2,70
32 30 155 78 110 22 4 260 24 2 95 11,50 44 36 230 5,20
40 38 170 88 125 22 4 260 28 3 95 14,80 50 43 230 7,70
50 45 195 102 145 26 4 300 28 3 140 15,70 62 54 300 12,90
65 62 220 122 170 26 8 340 30 3 170 37,50 77 69 340 26,30
80 73 230 138 180 26 8 380 32 3 195 40,30 91 81 380 27,50
100 94 265 162 210 30 8 430 36 3 200 54,00 117 104 430 37,20
125 120 315 188 250 33 8 500 40 3 225 76,00 144 127 500 48,90
150 144 355 218 290 33 12 550 44 3 300 151,00 172 154 550 101,10
200 195 430 285 360 36 12 650 52 3 400 215,00 223 199,5 650 135,00
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body
material
PN Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C 560°°°°C
bar
(P250GH)C
22.8
(1.0460)
100 100,0 92,8 88,0 83,3 76,1 69,0 64,2 59,5 32,8 - - - - - - - -
16Mo3
(1.5415) 100 100,0 100,0 100,0 100,0 97,6 85,7 80,9 76,1 73,8 56,0 44,2 36,1 28,0 22,3 - - -
13CrMo4-5
(1,7335) 100 100,0 100,0 100,0 100,0 100,0 99,5 95,2 90,4 85,7 73,4 65,2 54,9 44,7 37,1 29,0 23,3 19,0
GP240GH
(1.0619) 100 100,0 92,8 88,0 83,3 76,1 69,0 64,2 59,5 32,8 - - - - - - - -
G20Mo5
(1.5419) 100 100,0 100,0 100,0 100,0 97,6 85,7 80,9 76,1 73,8 56,0 44,2 36,1 28,0 22,3 - - -
G17CrMo5-5
(1.7357) 100 100,0 100,0 100,0 100,0 100,0 99,5 95,2 90,4 85,7 73,4 65,2 54,9 44,7 37,1 29,0 23,3 19,0
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
14
STRAINER V-041
CHARACTERISTIC:
Diameter - 15 -200 mm;
Pressure - 160 bar;
Temperature - up to 560°C;
Medium - water, steam and other non-toxic, non aggressive liquid and gas media and
engine fuel.
VERSIONS: type / ends / body material / others
Example: V-041 / --- / --- / ---
Example: V-041 / S / U / AS
Ends Sign Body material Sign Others Sign
Standard – flanged --- (P250GH) C 22.8 or GP240GH
--- Standard – without drain plug ---
Butt weld ends S
Socket weld SW 16Mo3 or G20Mo5 U With drain plug AS
Threaded G 13CrMo4-5 or G17CrMo5-5 A
APPLICATION:
Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
Do
do×n
f
L
H
g.
Dp
DN
Dz
d
60°
30°
Dw
Dz
Socket
weld
Drain plug (for order)
"AS"
DN 50 - 200 DN 15 - 40
”S”
”SW” ”G”
www.andrex-vg.com
15
MATERIALS: Versions Standard U A Standard U A
Parts TMAX 450
OC TMAX 530
OC TMAX 560
OC TMAX 450
OC TMAX 530
OC TMAX 550
OC
DN 15 - 40 DN 50 - 200
Body , bonnet (P250GH) C22.8 (1.0460)
16Mo3 (1.5415)
13CrMo4-5 (1.7335)
GP240GH (1.0619)
G20Mo5 (1.5419)
G17CrMo5-5 (1.7357)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Standard - flanged With butt weld ends
DN d Dz Dp Do do n L g. f H Weight Dz Dw L Weight
15 14 105 45 75 14 4 210 20 2 70 4,00 22 17 160 2,70
20 19 130 58 90 18 4 230 22 2 75 6,20 28 21 160 2,70
25 23 140 68 100 22 4 230 24 2 75 8,30 35 27 160 2,70
32 30 155 78 110 22 4 260 24 2 95 11,50 44 34,5 230 5,20
40 38 170 88 125 22 4 260 28 3 95 14,80 50 43 230 7,70
50 45 195 102 145 26 4 300 30 3 140 15,70 62 52,5 300 12,90
65 62 220 122 170 26 8 340 34 3 170 37,50 77 65 340 26,30
80 73 230 138 180 26 8 380 36 3 195 40,30 91 76,5 380 27,50
100 94 265 162 210 30 8 430 40 3 200 54,00 117 98,5 430 37,20
125 120 315 188 250 33 8 500 44 3 225 76,00 144 120,5 500 48,90
150 144 355 218 290 33 12 550 44 3 300 151,00 172 144,5 550 101,10
200 195 430 285 360 36 12 650 60 3 400 215,00 223 189 650 135,00
Dimensions in mm; modifications reserved.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 510°°°°C 520°°°°C 530°°°°C 540°°°°C 550°°°°C 560°°°°C
bar
(P250GH)C 22.8
(1.0460) 160 160,0 137,1 133,3 125,7 116,5 102,8 99,0 91,4 52,5 - - - - - - - -
16Mo3
(1.5415) 160 160,0 160,0 160,0 160,0 148,5 129,5 121,9 114,2 110,4 83,6 70.8 56,3 44,9 35,8
13CrMo4-5
(1,7335) 160 160,0 160,0 160,0 160,0 160,0 148,5 137,1 129,5 121,9 111,3 104,3 88,3 71,6 59,4 46,4 37,3 30,4
GP240GH
(1.0619) 160 160,0 137,1 133,3 125,7 116,5 102,8 99,0 91,4 52,5 - - - - - - - -
G20Mo5
(1.5419) 160 160,0 160,0 160,0 160,0 148,5 129,5 121,9 114,2 110,4 83,6 70.8 56,3 44,9 35,8 - - -
G17CrMo5-5
(1.7357) 160 160,0 160,0 160,0 160,0 160,0 148,5 137,1 129,5 121,9 111,3 104,3 88,3 71,6 59,4 46,4 37,3 30,4
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
16
STRAINER V-031S
CHARACTERISTIC:
Diameter - 15 -125 mm;
Pressure - 250 bar;
Temperature - up to 600°C;
Medium - water, steam and other non-toxic, non aggressive media and engine fuel,
sea water.
VERSIONS: type / body material / others
Example: V-031S / ---
Example: V-031S / U
Body material Sign Others Sign
(P250GH) C 22.8 --- Standard – without drain plug ---
16Mo3 U
13CrMo4-5 A
10CrMo9-10 B
14MoV6-3 C
APPLICATION: Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
L
30°45°
H6
18°
Dw
Dp
Dzd
www.andrex-vg.com
17
MATERIALS:
Versions Standard U A B C
Parts TMAX 450OC TMAX 530
OC TMAX 560
OC TMAX 600
OC TMAX 570
OC
Body , bonnet (P250GH) C22.8
(1.0460)
16Mo3
(1.5415)
13CrMo4-5
(1.7335)
10CrMo9-10
(1.7380)
14MoV6-3
(1.7715)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Standard – butt weld ends H
DN d Dz Dw L Weight
15 14 22 16 160 4,00 97
20 20 28 19,5 160 4,00 97
25 24 35 26,5 160 4,00 97
32 32 44 32,5 300 15,00 200
40 38 50 38,5 300 15,00 200
50 48 62 45 300 15,00 200
65 62 77 59,5 340 26,50 220
80 76 117 93 380 55,50 243
100 92 144 116,5 430 71,00 271
125 112 172 138,5 500 91,00 -
Dimensions in mm; modifications reserved.
The height of strainers depend from precision of filter.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 520°°°°C 530°°°°C 540°°°°C 560°°°°C 570°°°°C 600°°°°C
bar
(P250GH)C 22.8
(1.0460) 250 250,0 232,1 220,2 208,3 190,4 172,6 160,7 148,8 82,1 - - - - - - - -
16Mo3
(1.5415) 250 250,0 250,0 250,0 250,0 244,0 214,2 202,3 190,4 184,5 140,2 110,7 70,2 55,9 - - - -
13CrMo4-5
(1,7335) 250 250,0 250,0 250,0 250,0 250,0 248,8 238,0 226,1 214,2 183,5 163,0 111,9 92,8 72,6 47,6 39,2 -
14MoV6-3
(1.7715) 250 250,0 250,0 250,0 250,0 250,0 250,0 250,0 248,8 241,7 239,9 229,8 177,4 156,0 134,5 102,4 86,9 -
10CrMo9-10
(1.7380) 250 250,0 250,0 250,0 250,0 250,0 250,0 244,0 232,1 220,2 184,5 160,7 122,6 107,1 92,8 69,0 60,7 40,4
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
18
STRAINER V-061
CHARACTERISTIC:
Diameter - 15 -125 mm;
Pressure - 320 bar;
Temperature - up to 600°C;
Medium - water, steam and other non-toxic, non aggressive media and engine fuel,
sea water.
VERSIONS: type / ends / body material / others
Example: V-061 / --- / ---
Example: V-061 / K / U
Ends
Body material Sign Others Sign
Butt weld ends- standard --- (P250GH) C 22.8 --- Standard – without drain plug ---
Flanged K 16Mo3 U
13CrMo4-5 A
10CrMo9-10 B
14MoV6-3 C
APPLICATION:
Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
L
30°45°
6
18°
Dw
Dp
Dzd
Do
do x n
L
g.
f
www.andrex-vg.com
19
MATERIALS:
Versions Standard U A B C
Parts TMAX 450OC TMAX 530
OC TMAX 560
OC TMAX 600
OC TMAX 570
OC
Body , bonnet (P250GH) C22.8
(1.0460)
16Mo3
(1.5415)
13CrMo4-5
(1.7335)
10CrMo9-10
(1.7380)
14MoV6-3
(1.7715)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Flanged "K" Standard-Butt weld ends
DN Dz Dp Do do n L g. f Weight d Dz Dw L Weight
15 130 45 90 18 4 230 26 2 8,70 14 22 15 160 3,80
20 150 58 105 22 4 260 30 2 11,30 20 28 19 160 3,80
25 160 68 115 22 4 260 34 2 13,30 24 35 24 160 3,80
32 - - - - - 300 - - - 32 44 31,5 300 14,00
40 195 88 145 26 4 300 38 3 30,20 38 50 36 300 14,00
50 210 102 160 26 8 350 42 3 32,00 48 77 59,5 300 14,00
65 255 122 200 30 8 400 51 3 57,80 62 91 68 340 24,50
80 275 138 220 30 8 450 55 3 93,00 76 117 87,5 380 52,50
100 335 162 265 36 8 520 65 3 138,50 92 144 109,5 430 68,00
125 380 188 310 36 12 600 75 3 186,90 112 172 130,5 500 88,00
Dimensions in mm; modifications reserved.
The height of strainers depend from precision of filter.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 520°°°°C 530°°°°C 540°°°°C 560°°°°C 570°°°°C 600°°°°C
bar
(P250GH)
C 22.8
(1.0460)
320 320 320 320 290 259 229 198 168 105 -
16Mo3
(1.5415) 320 320 320 320 320 320 312 274 259 244 236 142 90 72 -
13CrMo4-5
(1,7335) 320 320 320 320 320 320 320 320 305 290 274 209 143 118 93 61 - -
14MoV6-3
(1.7715) 320 320 320 320 320 320 320 320 320 318 309 307 227 200 172 131 111 -
10CrMo9-10
(1.7380) 320 320 320 320 320 320 312 297 282 267 251 242 157 137 119 88 78 52
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
www.andrex-vg.com
20
STRAINER V-051
CHARACTERISTIC:
Diameter - 15 -125 mm;
Pressure - 400 bar;
Temperature - up to 600°C;
Medium - water, steam and other non-toxic, non aggressive media and engine fuel,
sea water.
VERSIONS: type / ends / body material / others
Example: V-051 / --- / ---
Example: V-051 / K / U
Ends
Body material Sign Others Sign
Butt weld ends- standard --- (P250GH) C 22.8 --- Standard – without drain plug ---
Flanged K 16Mo3 U
13CrMo4-5 A
10CrMo9-10 B
14MoV6-3 C
APPLICATION: Strainers are used to protect the pipeline and its equipment from impurities. The strainer stop every
mechanical impurities bigger then mesh size. The strainers can be made with drain plug for special order.
L
30°45°
6
18°
Dw
Dp
Dzd
Do
do x n
L
g.
f
www.andrex-vg.com
21
MATERIALS:
Versions Standard U A B C
Parts TMAX 450OC TMAX 530
OC TMAX 560
OC TMAX 600
OC TMAX 570
OC
Body , bonnet (P250GH) C22.8
(1.0460)
16Mo3
(1.5415)
13CrMo4-5
(1.7335)
10CrMo9-10
(1.7380)
14MoV6-3
(1.7715)
Strainer X6CrNiTi18 10 (1.4541)
Gasket Grafit + austenite
Special materials on request; modifications reserved.
DIMENSIONS:
Standard-butt weld ends
DN d Dz Dw L Weight
15 14 28 17 160 3,80
20 20 35 21,5 160 3,80
25 24 44 29 160 3,80
32 32 50 33 300 14,00
40 38 62 40 300 14,00
50 48 77 49,5 300 14,00
65 62 91 62 340 24,50
80 76 117 81 380 52,50
100 92 144 102 430 68,00
125 112 172 126,5 500 88,00
Dimensions in mm; modifications reserved.
The height of strainers depend from precision of filter.
TECHNICAL DATA:
Body material PN
Maximal working pressure at working temperature
20°°°°C 100°°°°C 150°°°°C 200°°°°C 250°°°°C 300°°°°C 350°°°°C 400°°°°C 450°°°°C 480°°°°C 500°°°°C 520°°°°C 530°°°°C 540°°°°C 560°°°°C 570°°°°C 600°°°°C
bar
(P250GH)C 22.8
(1.0460) 400 400,00 371,38 352,38 333,25 304,75 276,13 257,13 238,00 131,38 - - - - - - - -
16Mo3
(1.5415) 400 400,00 400,00 400,00 400,00 390,38 342,75 323,75 304,75 295,13 224,38 177,13 112,38 89,50 - - - -
13CrMo4-5
(1,7335) 400 400,00 400,00 400,00 400,00 400,00 398,00 380,88 361,88 342,75 293,63 260,88 179,00 148,50 116,13 76,13 62,70 -
14MoV6-3
(1.7715) 400 400,00 400,00 400,00 400,00 400,00 400,00 400,00 398,10 386,70 383,80 367,60 283,80 249,50 215,20 163,80 139,00 -
10CrMo9-10
(1.7380) 400 400,00 400,00 400,00 400,00 400,00 400,00 390,38 371,38 352,38 295,13 257,13 196,13 171,38 148,50 110,38 97,13 64,8
Mesh
• 100 meshes/cm2; basic mesh size 0,6 mm - standard;
• 200 meshes/cm2; mesh size 0,35 mm;
• 400 meshes/cm2; mesh size 0,25 mm;
• 600 meshes/cm2; mesh size 0,1 mm.
