STOREDGE TM Upgrade existing PV systems to StorEdge TM All the benefits of the HD-Wave technology record-breaking efficiency, extremely small, lightweight and easy to install, and high reliability without any electrolyc capacitors Specially designed to work side by side with three-phase SolarEdge inverters and non- SolarEdge inverters Compable with the StorEdge Interfaces and selected baery vendors such as the LG Chem RESU Monitors baery status, PV inverter producon, and self-consumpon data for full visibility IP65 – Outdoor and indoor installaon No high voltage or current during installaon, maintenance or firefighng for maximum safety The StorEdge TM AC Coupled Inverter does not work with power opmisers or as a standard solar PV inverter www.solaredge.com StorEdge TM AC Coupled Single Phase Inverter with HD-Wave Technology for Australia SE3000H, SE5000H 12-25

StorEdge AC Coupled Single Phase Inverter for Australia

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: StorEdge AC Coupled Single Phase Inverter for Australia

STO

RED

GETM

Upgrade existing PV systems to StorEdgeTM

AllthebenefitsoftheHD-Wavetechnologyrecord-breakingefficiency,extremelysmall,lightweightandeasytoinstall,andhighreliabilitywithoutanyelectrolyticcapacitors

Speciallydesignedtoworksidebysidewiththree-phaseSolarEdgeinvertersandnon-SolarEdgeinverters

CompatiblewiththeStorEdgeInterfacesandselectedbatteryvendorssuchastheLGChemRESU Monitorsbatterystatus,PVinverterproduction,andself-consumptiondataforfullvisibility IP65–Outdoorandindoorinstallation Nohighvoltageorcurrentduringinstallation,maintenanceorfirefightingformaximumsafety TheStorEdgeTMACCoupledInverterdoesnotworkwithpoweroptimisersorasastandardsolarPVinverter

www.solaredge.com

StorEdgeTM AC Coupled Single Phase Inverter with HD-Wave Technology for Australia SE3000H, SE5000H

12-25

Page 2: StorEdge AC Coupled Single Phase Inverter for Australia

StorEdgeACCoupledSinglePhaseInverterwithThreePhaseSolarEdgeInverter

StorEdgeACCoupledSinglePhaseInverterwithNon-SolarEdgeInverter

Loads

Monitoring Platform

DC

DC

StorEdge Interface

Non-SolarEdge Inverter

StorEdge AC Coupled Inverter

AC

Energy Meter

Energy Meter

* Optional

* Optional - needed for full system monitoring: consumption, self-consumption and inverter production

PV Grid

Supported Batteries

Supported Batteries

Loads

Monitoring Platform

DC

DC

StorEdge Interface

AC

Energy Meter

SolarEdge 3Ph Inverter

Power Optimisers

PV Grid

StorEdge AC Coupled Inverter

Battery Pack

Battery Pack

RS485 Kit

Page 3: StorEdge AC Coupled Single Phase Inverter for Australia

© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein

are trademarks of their respective owners. Date: 07/2017. V.01. Subject to change without notice.

SE3000H SE5000H OUTPUT RatedACPowerOutput(1) 3000 4985 VAMaximumACPowerOutput (1) 3000 4985 VAACOutputVoltage(Nominal) 220 / 230 VacACOutputVoltageRange 184-264.5 VacACFrequency(Nominal) 50/60±5 HzMaximumContinuousOutputCurrent 14 23 AResidualCurrentDetector/ ResidualCurrentStepDetector 300 / 30 mA

UtilityMonitoring,IslandingProtection,CountryConfigurableThresholds Yes

INPUT Battery LGChemRESU7H(2) LGChemRESU10H(2) WTransformer-less,Ungrounded Yes MaximumInputVoltage 480 VdcNominalDCInputVoltage 380 VdcMaximumInputCurrent 9 13.5 AdcReverse-PolarityProtection Yes Ground-FaultIsolationDetection 600kΩSensitivity MaximumInverterEfficiency 99.2 %EuropeanWeightedEfficiency 98.8 99 %NighttimePowerConsumption <2.5 WADDITIONAL FEATURESSupportedCommunication Interfaces(3) RS485,Ethernet,ZigBee(optional),Wi-Fi(optional),Cellular(optional)

STANDARD COMPLIANCE Safety IEC-62109-1/2,AS-3100

GridConnectionStandards AS-4777,VDE-AR-N-4105,VDE0126-1-1,UTEC15-712,G83/2,G59/3,CEI-021,EN50438,IEC61727,IEC62116,ÖNORM,TF3.2.1,C10-11,NRS097-2-1

Emissions IEC61000-6-2,IEC61000-6-3,IEC61000-3-11,IEC61000-3-12,FCCpart15classB INSTALLATION SPECIFICATIONS ACOutputConduitSize/AWGRange 19-25.4mm/14-6AWG DCInputConduitSize/#ofStrings/AWGRange 19-25.4mm/1-2strings/14-6AWG

DimensionswithSafetySwitch(HxWxD) 450x370x174 mmWeightwithSafetySwitch 11.5 kgCooling NaturalConvection Noise <25 dBAOperatingTemperatureRange -20to+60(4)(-40˚Copton) ˚CProtectionRating IP65-OutdoorandIndoorBracketMounted(BracketProvided)

(1)TheACpoweroutputistheminimumbetweentheACPowerOutputandthebatterycontinuouspeakpower(2)SupportingStorEdgeInterfacerequired(3)RefertoDatasheets->CommunicationscategoryinDownloadspageforspecifcationsofoptionalcommunicationoptions:http://www.solaredge.com/groups/support/downloads(4)De-ratingfrom50˚C

StorEdge AC Coupled Single Phase Inverter with HD-Wave Technology for Australia SE3000H, SE5000H