Stetter Truck Mixer Brochure

8/22/2019 Stetter Truck Mixer Brochure

1/12

StetterA member of the SCHWING group

Stetter

Truck Mixers


2/12

2

Stetter Truck Mixers Easy-Care Technique in Modern Design

Whether C+ (6 and 7 m) or

C-Version (8 15 m), both

variants of the Stetter truckmixer the original do justice

once again to their spearhead-

ing function. While adhering

consistently to the principle

Form Follows Function, we

have focused on handling andcost-cutting in after-sales serv-

ice, maintenance and servicing.

The ongoing further develop-

ment of gearbox and hydraulic

components by leading manu-facturers with the support

of our company ensures

reliability and economic ef-

ficiency in the operation of

our truck mixers. The mixer

drums with their sophisticated

mixing blades are designed

for maximum performance.

The use of high-grade materi-

als and precisely coordinated

material thicknesses ensuresa low dead weight and a long

service life. Design, production

quality, good service, safety and

long-term economic efficiency

pay off for the owner not

least in the high resale value.

Our truck mixers are based on

decades of experience, for which

there is no substitute and which

is reflected tangibly in each

and every Stetter truck mixer.

The newly developed trestle

for truck mixers with capacity

ratings of 6 and 7 m combinesthe advantages of the success-

ful C-Version with additional

features:

Optimum torsional flexibility

due to the arched supportThe design of the supporting

arms corresponds to the straincurve

Our truck mixers naturally

fulfil the CE criteria in terms of

machine directive 89/392/EEC.

Carrying rollers integrated

into the outlet trestle

facilitate replacement, asno additional aligning is

required.

The optional electric variable

displacement system for the

pump offers safe, comfortablemixer operation from the rear

of the machine and, as an

option, from the drivers cab.


3/12

3

Handling Simplicity and Cost Minimization withMaintenance and Servicing.

With the C-Version you reducethe time spent on filling,

emptying and cleaning to aneconomic minimum. You gain

time time in which to earn

money.

Stetter truck mixers with

capacity ratings of 8, 9, 10,

12 and 15 m offer maximumeconomic efficiency through

maximum loading potential and

favourable dead weight.

The low gravicentric position

of the mixer superstructuremakes for a balanced load

distribution. These truck mixers

meet the demands for an

exceptionally high transport

volume when more lightweightmaterial is to be transported or

simply when reserve capacities

for material transport are to be

readily available.

Stetter truck mixers can bemounted on all standard three-

and four-axle chassis or on

semi-trailers as articulated

vehicles with capacity ratings

of 10 and 12 m.

Aluminium mudguards reduce

the weight of the overall

superstructure.

Underride guard in

tilting execution.

For increased clearance duringconcrete discharge.

Underride guard in slidingexecution. Both types of

underride guard comply withEU directive 70/221/EEC.

The outlet trestle

of the C-Version:

Fast, simple cleaning due to the smooth rear wall surface.

Simple discharge into the concrete pump hopperdue tothe extended swivel chute.

The bolted chute offers replacement simplicity for repair

purposes. Plenty of clearance for concrete discharge into crane

buckets and concrete storage silos.

4

5

4

5


4/12

4

Powerful and economically efficient

A powerful, economically ef-

ficient truck fleet is of crucial

importance for any ready-mixconcrete plant or any transport

undertaking. Factors playing a

major role are the flexibility of

the available vehicles and the

exploitation of the maximum ad-

missible vehicle gross weights.

Stetter truck mixers on semi-

trailer chassis offer the ideal

supplement. Truck mixer su-perstructure and semi-trailer

have been optimally coordi-

nated to form compact units

guaranteeing a high loading

volume and high payloads,

optimum driving characteristics

due to a low gravicentric posi-

tion, and operator friendliness.

A smooth-surfaced functional

rear makes for fast, simple

cleaning and optimum dischargeinto the concrete pump hopper

and crane bucket. Stetter truck

mixers are available with ca-

pacity ratings of 10 and 12 m.

Depending on whether the

semi-trailer tractor is already

present or has to be procured,semi-trailers in modular con-

struction are available in 2-axle

or 3-axle versions with 9 t or

10 t axles. State-of-the-art

technology such as disk-braked

ABS-sensored axles, EBS sys-tem and pneumatic suspen-

sion are a matter of course.

The outlet trestle

of the C-Version:

Fast, simple cleaning due to the smooth rear wall surface.

Simple discharge into the concrete pump hopper due to the

extended swivel chute.

The bolted discharge shell offers replacement simplicity forrepair purposes.

Plenty of clearance for concrete discharge into crane bucketsand concrete storage silos.

Optional equipment:

Soundproofing hood for sepa-

rate engines, adapted to thelatest emission regulations.

Designed to meet the engine

manufacturers requirements

with respect to air supply

and ventilation. The bondedinsulating material is flame

resistant, non-combustible andself-extinguishing.

Optional no-load semi-

trailer outriggers. These are

kept on the semi-trailer and

operated with a crank handle.

The plastic single-wheelmudguards offer optimum

protection from splashing.

They are also a well designed

feature.6

5

3

5


5/12

5

Drives with a Great Track Record

Efficient, lightweight plan-

etary gears with a high outputtorque ensure that even strong

vehicle torsions are absorbed.

PLM

Single-stage planetary gear

with integrated slow-runningradial-piston hydraulic motor.

Gearbox, filter, radiator, venti-

lator, integrated hydraulic mo-

tor in compact, short design.

A complete system solution

including electric pump adjust-ment (operated from rear of

vehicle or from drivers cab) is

available.

TMG

2-stage lightweight planetary

gear with high output torque.Optional deployment with inte

grated water-pump drive. Driv

en by external hydraulic motor.

A complete system solution

including electric pump adjust

ment (operated from rear ofvehicle or from drivers cab) is

available.

Type FH

In this case the vehicle engine

is used as the drive source.In general, power is drawn

from the vehicle engine by

camshaft drive or by a gear-in-

dependent auxiliary drive. Low

purchase price and running

costs. High service load dueto low own weight. Requires

minimum maintenance and is

abrasion-resistant.

Type SH

The mixer drum is driven by

a separate air-cooled engine.

The hydraulic pump is flange-mounted directly at the sepa-

rate engine. The water pump is

operated by V-belts driven by

the separate engine. This type

of drive is used primarily for in-

terchangeable superstructures

and when the mixer

drum requires a completely

vehicle-independent speed to

cope with special deploymentconditions.

If exceptionally stringent emis-sion regulations have to beobserved, the separate en-gine can be equipped with anoptional soundproofing hooddesigned to meet the engine

manufacturers requirementswith respect to air supplyand ventilation. The bondedinsulating material is flameresistant, non-combustible andself-extinguishing.6 6


6/12

6

Outstanding Characteristicsof your Stetter Truck Mixer

Optimum driving

characteristics due to

low gravicentric positionfor increased safety during

cornering and when driving

over rough terrain.

Outstanding mixing charac-

teristics due to large geomet-

ric drum volume and double-thread mixing spiral with up to

five turns.

Additional wear plates in the

main wear zones of the mixer

drum.

High loading volume

due to high water lines.

Reinforcing cone in the

drum bottom for further

stabilization and for additional

wear protection on the drum

bottom.

Wear protection

(30 x 8 mm) on the mixing

spirals for additional stabiliza-

tion and increased service lifeof the mixing spiral.

Simple discharge into

concrete pump hoppers

due to a 200 mm chute

extension.

Fast, simple cleaning

due to the smooth rear wall

surface of the outlet trestle.The water pipeline runs

outside the soiling-prone

areas.

4


7/12

7

Rapid, uniform emptying

characteristics due to varying

horizontal pitch of the mixingspirals and steep discharge

shell with standard wear plate.

Generous clearance for

concrete discharge into large

crane buckets and concrete

storage silos.

Operator friendliness due to

practical detailing.

Reduced repair costs

due to completely removable

intake hopper assembly. The

bolted discharge shell can

be readily replaced for repairpurposes.

Increased abrasion

resistance

of drum wall and mixing

spirals due to exceptionallyhigh-grade steel with a high

chromium and nickel content.

The mixing spirals are 5 mmthick in the main wear zones.

Ongoing, practice-oriented

materials testing.


8/12

8

Hinged part

The hinged part with safetyshackle is available in steel or

in plastic on request.

Adapter

Flow concrete pipe

The adapter enables additional

delivery pipes to be connected

for the placement of flow

concrete.

A plastic hinged part

makes it even simpler to

extend the swivel chute. Up totwo additional plastic extension

chutes can be added.

Flow concrete pipe with

mount

Available in lengths of 3 and5 m for the placing offlow

concrete.Mounts adapted to specified

lengths can be supplied for

flow concrete pipes provided

by the customer.

The lightweight plastic

extension chute

(weight per chute: ca. 9 kg)

helps in routine operationsand saves weight in the overallsuperstructure.

Up to two chutes can be

hanged one in another.

Admixture system

compressed-air version

Forfilling plasticizer directly

into the truck mixer. The tankhas a standard capacity of60 liters. The pressurized

admixture tank is available in

steel or stainless steel.

Return flap for swivel chute

On-site cleaning facilities

are not always available. In

this case the non-return flapprevents residual concrete

from escaping and soiling the

road surface on the way back

to the mixing plant.

Admixture system gravity

version

Forfilling plasticizer directly

into the truck mixer. The tankhas a standard capacity of 42

liters.

Hydraulic chute adjustment

mechanism

The hydraulic chuteadjustment mechanism makes

it easier to raise and lower the

swivel chute.

Mortar bucket mount

Stacking device for mortar

buckets with rapid-actionclosures.

Tried-and-Tested Application-OrientedOptional Equipment


9/12

9

Two halogen floodlamps

at the rear of the machine,for illuminating the unloading

area.

Stop valve in the feed line

- after all, next winter is onits way! This allows you to

empty the entire water system

whenever there is a risk of

frost.

Removable floodlamp

to illuminate the unloading

area

Water meter

with scales for 500 or 1000

liters, for precise proportioning

Widening of mudguards

Protects the truck mixer from

severe soiling on and off the

road.

Recommended in conjunction

with the frame covering.

Consistency gauge

The pressure gauge shows

the operating pressure of the

hydraulic system and gives areference value for the changein concrete consistency with

unchanged loads.

Frame covering

The covering between the

auxiliary frame protects the

truck mixer from severe soilingon and off the road.

Recommended in conjunction

with the widening of

mudguards

-flap Drum cover

The drum closure prevents

liquid contents from spillingwhen the truck mixer is

started, braked or driven on

steep gradients.

Aluminium mudguards

reduce the overall weight ofthe superstructure.

Full-flap Drum cover

The full flap offers a maximum

effective capacity for thetransport of concrete with

a more liquid consistency.

Higher effective capacity =

increased economic efficiency.


10/12

10

Stetter Truck Mixers: Setting the Standards.At Home on All Chassis


11/12

11


12/12

StetterA member of the SCHWING group12

Stetter: state-of-the-art production plants competent,customer-oriented service through a worldwide network of

dealers and servicing centres.

Stetter GmbH

Postfach 1942

87689 Memmingen

Germany

Phone +49 83 31 / 78-0

Fax +49 83 31 / 78-275e-mail: [email protected]

Internet: www.stetter.de

Subject to technical and

dimensional modifications.

Photos are not binding. Theexact scope of the delivery

is listed in the offer.

w

ww.wsw-bloch.com

SCHWING headquarters

Subsidiary with production facilities

Subsidiary with sales / service

Plus dealers / agents in more

than 90 countries Worldwide

Documents

Stetter Truck Mixer Brochure