STEP TO GET EXCEL OUT FROM OMCR V2 BSC Step 1.First disable all antivirus and firewall setting Step 2 copy the Software to C:\\ drive Step 3.Check firewall with advanced security setting (Inbound rule setting)for ddswf,fmwsf,gpocc,ice,pap,uisf etc related to OMCR .IF disabled make it Allow or enabled this parameters. Step 4.check windows features turns off and on. Enabled all features and if need reboot.
STEP TO GET EXCEL OUT FROM OMCR V2 BSCStep 1.First disable all
antivirus and firewall setting Step 2 copy the Software to C:\\
driveStep 3.Check firewall with advanced security setting (Inbound
rule setting)for ddswf,fmwsf,gpocc,ice,pap,uisf etc related to OMCR
.IF disabled make it Allow or enabled this parameters.
Step 4.check windows features turns off and on. Enabled all
features and if need reboot.
Step 5.Then go to C:\OMCR\bin folder where you have copy the
software.Step 6.Select listed applications and chose compatibility
and run in Windows XP SP2 and run as
administratora.browse.b.ddwsfc.papd.pmonwsfe.pmtunef.uisfg.viewexample:
Step 7.Create shortcut of uisf by sending to desktop.Step 8.Goto
Allow programs to communicate through firewall edit and enable all
acess edit like this if only necessaryStep 9.Then goto
C:\\OMCR\conf\ and open syscfg file in wordpad and edit like this
if only necessary # wanting to set report saving path ,must make
"NeedSet" to be 1# for example: set PATH as
D:\backup\[PAP_REPORT]NeedSet = 1PATH = C:\desktop
