Upload
tommyc1024
View
57
Download
9
Embed Size (px)
DESCRIPTION
DIALUX Manual
Citation preview
Step by Step
Street Lighting Simulation
with OSRAM LEDs in DIALux
Agenda
Introduction and Install of DIALux
Import IES files of OSRAM LEDs
Quick Street Planning Wizard with DIALux
Step by Step – Design with OSRAM LEDs in DIALux
Event / Title | December 17, 2008 | Page 2
Drr.MEC /c.channarong
Page
3
8
12
20
What is special about DIALux?
DIALux - a planning software for your project presentation.
Calculation: latest radiosity procedures, fast and always correct.
Results: Results can be printed out or transmitted as a pdf file. Each
view and each rendering can be saved as a .jpg file.
Interactive 3-D visualization: Simply move around the room.
Visualization: Use of textures and furniture for realistic rendering.
Photo realism: with integrated raytracing module.
False colours: False colours provide quantitative analysis of
complex geometries at a glance.
Movies: Walk through the photo realistic visualization of your light
planning and send the film to your customer via email.
Interaction: Import and export: .dwg and .dxf files can be imported
and exported with results after completion of the planning process.
DIALux Light: Easy to use, step-by-step lighting design.
Event / Title | December 17, 2008 | Page 3
Drr.MEC /c.channarong
Free Download DIALux from website
Download the DIALux Setup (version DIALux 4.5.0.1 ) from homepage (www.DIAL.de or
www.dialux.com) on your hard-disk.
Language available
– deutsch
– english
– fran็ ais
– italiano
– espa๑ol
– 中文
Download file size:
about 250MB
Event / Title | December 17, 2008 | Page 4
Drr.MEC /c.channarong
www.DIAL.de or www.dialux.com
Online Update
If you have already installed old version of DIALux, you could use “ online update” to
newest version.
In DIALux you will find a new menu named “Online”.
After selecting “Online Update…” DIALux automatically checks for newer versions of the
software and for new online PlugIns.
But it will take some time to finish update.
Event / Title | December 17, 2008 | Page 5
Drr.MEC /c.channarong
The DIALux User Interface
These three work areas enable effective and clearly arranged planning of lighting
installation with DIALux.
Project manager
with Inspector
Event / Title | December 17, 2008 | Page 6
Drr.MEC /c.channarong
CAD-Window
Task Pane
.IES or .Idt files
.IES or .Idt file describe the
information of light distribution,
luminous flux, and power.
.IES or .Idt file are very small
( only about 10K) compared to
ray data (about 200M).
OSRAM OS provide both .IES
(or .Idt) file and ray data of our
LED products on website.
Event / Title | December 17, 2008 | Page 8
Drr.MEC /c.channarong
Download .IES file of OSRAM LED from website
http://www.ledlightforyou.com
Tools & Downloads >> Optical Tools
Event / Title | December 17, 2008 | Page 9
Drr.MEC /c.channarong
Import .IES file to DIALux
Event / Title | December 17, 2008 | Page 10
Drr.MEC /c.channarong
Quick Street Planning Wizard
This wizard guides you through the quick planning for streets.
you will find the wizards in
the menu File >> Wizard
Event / Title | December 17, 2008 | Page 12
Drr.MEC /c.channarong
Street profile and illumination class
Street profile
Street name and maintenance factor are likewise inserted on this page.
In the following window you can fix the individual or combined valuation
fields for the street. In order to define photometric requirements for the
street, select an illumination class for every valuation field.
Event / Title | December 17, 2008 | Page 13
Drr.MEC /c.channarong
Luminaire arrangement
In the window Luminaire arrangement you can select a luminaire and place this
in an arrangement. (You need to import the IES file of OSRAM LEDs first,
otherwise you can only select the existing traditional luminaire in DIALux)
You can optimize the arrangement parameters depending on the predefined
photometric requirements.
Event / Title | December 17, 2008 | Page 14
Drr.MEC /c.channarong
Start Calculation
Afterwards a final dialogue will appear automatically. If you activate the checkbox, the generated
street will be calculated immediately.
Click on the Finish button and your street project will be displayed.
Event / Title | December 17, 2008 | Page 15
Drr.MEC /c.channarong
Rotate 3D View
Event / Title | December 17, 2008 | Page 16
Drr.MEC /c.channarong
Rotate 3D View; left-click and move the mouse
while holding the mouse button pressed.
3D light distribution Display
Help Rays for Luminaires / 3D light distribution Display / Show false colors in CAD
Event / Title | December 17, 2008 | Page 17
Drr.MEC /c.channarong
•
•
•
Show false colors in CAD
Display the 3D rendering in a false colour
rendering
Easy to check the illuminance uniformity
Freely scaleable value ranges and definable
colour gradients
Event / Title | December 17, 2008 | Page 18
Drr.MEC /c.channarong
Step 1: Collecting road information
Street profile, width, N of lanes, coating…
Information list before design:
1. Street location and photos
2. Width of street
3. N of lanes
4. Coating material
Decide the road classification and required E
according to street lighting standards
av and Uo
5. Existing mounting height or pole distance?
Information needed for lighting simulation
Event / Title | December 17, 2008 | Page 20
Drr.MEC /c.channarong
Step 2: Edit street in DIALux
Arrangement of street component according
to the road information.
Event / Title | December 17, 2008 | Page 21
Drr.MEC /c.channarong
Step 3: Decide which LED
CCT: from 5000K-6500K (LW, LUW)
(color bin and brightness group)
If need CCT from 4000K-5000K, can be mixed by LUW and LY.
Golden DRAGON
with Oval Lens
No need of secondary
optical design
Event / Title | December 17, 2008 | Page 22
Drr.MEC /c.channarong
Golden DRAGON Plus
Need lens or reflector
Higher brightness
Step 4: Change luminous flux
You can change the luminous flux and power here.
It’s related to how many LEDs in one lamp.
Event / Title | December 17, 2008 | Page 23
Drr.MEC /c.channarong
Step 5: luminaire arrangement
Lighting Class Single row
Double row,
Double row,
Normal methods of
luminaire arrangement
with offset opposing
Single row
Double row, opposing
Double row, with offset
Luminaire arrangement
will be decided based on
street profile
requirements
For LUW W5JM, Double
row, opposing was
recommended.
Road information
Uniformity
Figure
W ≤ 6m
N ≤ 2
0.4~0.5
W ≥ 8m
N ≥ 2
0.5~0.8
W ≥ 16m
N ≥ 4
0.5~0.8
! Rules
of
thumb
Event / Title | December 17, 2008 | Page 24
Drr.MEC /c.channarong
Step 6: Optimize arrangement parameters
Optimize arrangement parameters
Boom Length
(1) Mounting Height: 6m~10m
(2) Overhang: 1m~2m
(3) Boom Angle: 10 ฐ ~15 ฐ
(4) Boom Length: 1m~3m
(5) Pole Distance
These parameter will be optimized
according to street profile to achieve
best performance: Eavand Uo.
If a certain Uo was required, the most
economic mounting height and pole
distance could be optimized.
Lower distance, longer pole distance
could save energy and pole cost.
Event / Title | December 17, 2008 | Page 25
Drr.MEC /c.channarong
Boom Angle
Mounting Height
Overhang
(5)Pole Distance
Lamp
Step 7: calculation and
simulation
Change to double row, offset
2
Eav(lx) Emin(lx) Emax(lx) Uo Emin/Emax Double row, opposing
17 8.6 24 0.52 0.36
Not so uniform,
need to be improved
1
Optimized results
3
Eav(lx)
19
Emin(lx)
16
Emax(lx)
22
Uo
0.83
Emin/Emax
0.72
Event / Title | December 17, 2008 | Page 26
Drr.MEC /c.channarong
Step 8: Save the selected output as PDF file
Event / Title | December 17, 2008 | Page 27
Drr.MEC /c.channarong
Step 9: output design plan
Luminaire arrangement
Event / Title | December 17, 2008 | Page 28
Drr.MEC /c.channarong
Step 10: output simulation results
Isolines (E)
Table (E)
Eav(lx)
19
Emin(lx)
16
Emax(lx)
22
Uo
0.83
Emin/Emax
0.72
Main results
Event / Title | December 17, 2008 | Page 29
Drr.MEC /c.channarong