STEERING REBUILDERS & TRUCK PARTS, INC. 764 …srtp.us/yahoo_site_admin/assets/docs/Catalog_Pumps_-May...“S.R.T.P., INC” STEERING REBUILDERS & TRUCK PARTS, INC. 764 CR 383 - CLEVELAND,

“S.R.T.P., INC” STEERING REBUILDERS & TRUCK PARTS, INC.

764 CR 383 - CLEVELAND, TEXAS 77327 Ph: #281.386.7229 Fax: #281.432.1332 Web: www.srtp.us

POWER

STEERING

PUMPS MEDIUM & HEAVY DUTY TRUCK APPLICATIONS

S.R.T.P., INC. STEERING REBUILDERS & TRUCK PARTS, INC. 764 COUNTY ROAD 383 - CLEVELAND, TEXAS 77327

PHONE: (281) 386-7229 FAX: (281) 432-1332 E-MAIL: [email protected]

MD & HD PUMP Steering Catalog #5P

Revised - MAY 2013

EATON

HOBOURN

LUK

PARKER

SAGINAW

TRW

VICKERS

ZF

LENKSYTEME

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us

http://www.srtp.us



“PUMP IDENTIFICATION”

PUMP ROTATIONS: Most Pump Types: Page #2

EATON: B Series Reservoirs: Page #3 B Series Pumps & Parts: Page #’s 4-6 BB Series Pumps & Parts: Page #’s 7-9 U Series Pumps & Parts: Page #’s 10-11

HOBOURN: 205 Series Pumps & Parts: Page #’s 12-13 600 Series Pumps & Parts: Page #’s 14

LUK: Pumps & Parts: Page #’s 15-17

PARKER HANNIFIN: Pumps & Parts: Page #18-19

REXROTH: Pumps & Updates: Page # 20-21

SAGINAW: Pumps, Parts & Reservoirs: Page #’s 22-26

TRW: OLD SLIPPER TYPE Series Pumps & Parts: Page #27 EV / PS Series Pumps & Parts: Page #’s 28-30

VICKERS: V10, V20, VTM Series Pumps & Parts: Page #’s 31-33

ZED-F: CAST IRON & ALUMINUM Series Pumps & Parts: Page #’s 34-38

TABLE OF CONTENTS

SPECIAL NOTE:

This Website has been designed as a aid to make it easier for you (the customer) to properly identify a particular steering unit. To identify a particular Steering Pump, it will require you to

look your steering unit over to get any Name Brand and any Numbers that can possible be found. The catalog is broke down into various sections that pertain to all of the common name brands of Steering Pumps available on the market today. If you have the Name Brand such as

Vickers, LUK & Etc., then look in the “Table of Contents” above and refer to that particular illustration section of catalog to ID. If you have the part number off of the Steering Pump itself

or the OEM number from the dealer, then please call us at (281) 386-7229.



2

“PUMP ROTATIONS”

ENGINE TYPE PUMP ROTATION

(If known)

PUMP LOCATION ON

ENGINE (If known)

CAT. 1674 N/A N/A

CAT. 1693 N/A N/A

CAT. 3116 CCW N/A

CAT. 3126 CCW N/A

CAT. 3176 CCW N/A

CAT. 3208 CW N/A

CAT. 3406A CW N/A

CAT. 3406B CCW N/A

CAT. 3406C CCW N/A

CAT. 3406E CCW N/A

CAT. C10 / C12 CW N/A

CUMMINS L10 CCW N/A

CUMMINS M11 CCW N/A

CUMMINS NTC CW MOUNTS TO OIL PUMP

CUMMINS N14 CW MOUNTS TO OIL PUMP

CUMMINS KT CCW MOUNTS TO FRONT COVER

CUMMINS FD1060 (5.9L) CW MOUNTS TO FRONT COVER

CUMMINS FD1460 (8.3L) CW MOUNTS TO FRONT COVER

DETROIT 50 SERIES CCW N/A

DETROIT 60 SERIES CCW N/A

DETROIT 6V N/A N/A

DETROIT 8V N/A N/A

DT / DTA360 CCW N/A

DT466 CW N/A

DT466B CW N/A

DT466C CCW N/A

FORD BRAZILIAN 6.6L CCW N/A

FORD BRAZILIAN 7.8L CCW N/A

NOTE: TO VIEW THE INFORMATION ABOVE, IT MAYBE NECESSARY TO INCREASE THE SIZE OF THE PAGE.



3

“EATON B” RESERVOIRS

Steering Rebuilders & Truck Parts, Inc. offers a variety of “Good Used” and some “New” Eaton B Reservoirs. To determine what you need, refer to pictured

illustrations below. All reservoirs (1) thru (7) are viewed from the back. Call 281-386-7229 for “Price & Availability.

Need to know:

C) CLOCKING: 3-9, 6-12 & Etc. (Viewed from

back as shown) Also see illustrations.

Need to know:

A) NIPPLE LOCATION - Left Hand (LH Side) or Right Hand (RH side) viewed from back as shown in illustration

B) NIPPLE POSITION (Viewed

from Side of Reservoir) - Pointed Up (12 o’clock), Down (6 o’clock), Front (9 o’clock) or Back (3 o’clock)

LH Side RH Side

Common “Eaton B” Reservoirs

NOTE: “Eaton B Reservoirs” supplied without “Filter Kit” & “Dip Stick”. When ordering Reservoir, be sure to include a Filter Kit #PS275 (3.5” Long) or Filter Kit #PS277 (3” Long) &

Dip Stick #ERS24926. Call (281) 386-7229 FOR “PRICE & AVAILABILITY”

BACK VIEW FRONT VIEW

BACK VIEW

Application:

IHC w/ DT466

Application:

Cummins

Application:

3208 Cat.

Clocking

Clocking Clocking Clocking Clocking

Clocking Clocking

(1) (3) (2)

(4) (5) (6) (7)



4

“REMANUFACTURED”

“EATON B” SERIES - PUMPS w/o RESERVOIR

PULLEY DRIVE: Front axle weight up to 12K - **SRTP #300

(Ford #D0HZ3A674B, IHC. #493115C91)

Front axle weight 16K & up - **SRTP #301 (Ford #D0HZ3A674A, IHC. #493580C91)

**When ordering this pump, You will need to order a Filter Kit to replace

old one in Reservoir. To Order Filter Kit, we will need Length of Filter.

Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

GEAR DRIVE w/ 1 5/8” LONG SPLINE SHAFT:

Front axle weight up to 14K - **SRTP #500

Front axle weight 16K & up - **SRTP #499

**When ordering this pump, You will need to order a Filter Kit to replace

old one in Reservoir. To Order Filter Kit, we will need Length of Filter.

Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

GEAR DRIVE w/ 2.5” LONG SPLINE SHAFT:

ENGINE 3406A (Pump Rotation - CW)

Front axle weight up to 14K - **SRTP #501

Front axle weight 16K & up - **SRTP #502

ENGINE 3406B (Pump Rotation - CCW)

Front axle weight up to 14K - **SRTP #503CCW

Front axle weight 16K & up - **SRTP #504CCW

**When ordering this pump, You will need to order a Filter Kit to

replace old one in Reservoir. To Order Filter Kit, we will need Length of

Filter. Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

“GAS & DIESEL” ENGINES (Various Truck Applications)

“MACK” ENGINES (Mack Applications - Pump Mounts to A/C)

“CATERPILLAR” ENGINES

NOTE: All “Eaton B” Series pumps supplied with necessary O-ring & sealing washers to service reservoir.

2.5” long

1 5/8” long



5


“EATON B” SERIES - PUMPS w/o RESERVOIR

GEAR DRIVE w/ 3.25” LONG SPLINE

SHAFT:

Front axle weight up to 12K - SRTP #400

Front axle weight 16K & up - SRTP #401

**When ordering this pump, You will need to order a Filter Kit to replace old one in Reservoir. To Order Filter Kit, we will need Length of Filter. Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

GEAR DRIVE w/ 3.5” LONG THREADED NUT & KEYWAY SHAFT:

CLOCKWISE ROTATION: Front axle weight up to 14K - SRTP #600 Front axle weight 16K & up - SRTP #604

COUNTER-CLOCKWISE ROTATION: Front axle weight up to 14K - SRTP #601CCW Front axle weight 16K & up - SRTP #599CCW

**When ordering this pump, You will need to order a Filter Kit to replace old one in Reservoir. To Order Filter Kit, we will need Length of Filter. )Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

GEAR DRIVE w/ 4 3/8” LONG THREADED NUT & KEYWAY SHAFT:

CLOCKWISE ROTATION: Front axle weight up to 14K - SRTP #607 Front axle weight 16K & up - SRTP #606

COUNTER-CLOCKWISE ROTATION: Front axle weight up to 14K - SRTP #603CCW Front axle weight 16K & up - SRTP #605CCW

**When ordering this pump, You will need to order a Filter Kit to replace old one in Reservoir. To Order Filter Kit, we will need Length of Filter. Either 3” Long (SRTP #PS277) or 3.5” Long (SRTP #PS275)

“CUMMINS” ENGINES

“DETROIT 6V & 8V” ENGINES

“DETROIT 6V & 8V” ENGINES

Note: All “Eaton B” Series pumps supplied with necessary O-ring & sealing washers to service reservoir.

3.5” long

4 3/8” long

3.5” long



6

“EATON B” SERIES - PUMPS “SEAL KITS & PARTS”

PART TYPE CONTENTS SRTP PART # PART TYPE CONTENTS SRTP PART #

Rebuild Seal Kit Item #’s 1 - 7 8312 Dip Stick Item #11 ERS24926

Resv. O-ring Kit Item #5 & 10 8312RK Pulley Item #9 ERS97528

Filter Kit (Filter Length - 3.5”

Item #5, 6, 10 PS275 Filter Kit (Filter Length - 3”)

Item #5, 6, 10 PS277

Cartridge Kit (Low Volume)

Item #20 ERS27306 (No Longer Available)

Will need to order a Reman. Pump

Cartridge Kit (High Volume)


Will need to order a Reman. Pump

Shaft - All

Item #13 (No Longer Available)

Will need to order a Reman.

Pump

Reservoir Item #12 We will need Info to ID, See Page

#3, Call (281)386-7229

For “P&A”



7


“EATON BB” SERIES - PUMPS Typical “Pulley Drive” supplied

w/ & w/o Return Port

Application: Years 1986 & Up found on Various Gas & Diesel Engines (Example - 366 Gas, DT466)

Typical Gear Drive “Smoothed Keyed Shaft”

supplied w/ & w/o Return Port

Application: Years 1986 & Up found on Ford 6.6L & 7.8L

NOTE: See next page for SRTP Pump Breakdown Code to order pump needed.

Typical Gear Drive “11 Spline Shaft”

supplied w/ & w/o Return Port

Application: Years 1986 & Up found on Various Cummins NTC Engines

& L10, 3406 Cat. & 60 Series Detroit


Pressure Port Pressure Port

Return Port Return Port

Pressure Port




Illustration (1)

Illustration (3) Illustration (2)



8


“EATON BB” SERIES - PUMPS

R A 2 X - O RP

“SRTP” PUMP BREAKDOWN CODE

(A) Rear Housing

cover ID

(A1)Rotation

R = Right Hand CW

L = Left Hand CCW

G = Special “GM” Body

CW

(C) Pressure Setting

(C) Pressure Setting

A 650 - 850 N 1700 - 1900

B 800 - 1000 P 1750 - 1950

C 1000 - 1200 Q 1800 - 2000

D 1100 - 1300 R 1850 - 2050

E 1200 - 1400 S 1900 - 2100

F 1250 - 1350 T 1950 - 2150

G 1350 - 1550 U 2000 - 2200

H 1400 - 1600 V 2050 - 2250

J 1500 - 1700 W 2100 - 2300

K 1550 - 1750 X 2200 - 2400

L 1600 - 1800 Y 2250 - 2450

M 1650 - 1850 Z 2300 - 2500

(B) Orifice Size

(F) GPM

9/64” 1 = LV

5/32” 2 = LV

3/16” 3 = LV

13/64” 4 = HV

7/32” 5 = HV

RP = INLET PORT

O = Tube O-ring Port

Note: Certain Ford / GM models use a “Tube-O” pressure port. The standard BB uses a 3/4” - 16 O-ring Port. Pumps that need a “Tube-O” port are designated with the letter “O” as shown in “SRTP” Pump Breakdown. Omit if not

E) Shaft Type

(C1) Pressure Port

D) Return Port

D) Return Port

B) Orifice Size C) Pressure Setting

& C1) Pressure

A) Rear Housing Cover ID &

A1) Rotation:

F) MEASURE ACROSS 2 1/4” = (LV) Low Flow

2 3/4” = (HV) High Flow

NOTE: Either a Reservoir or Hose Adapter will be mounted as shown in illustration below.

(E) Shaft Types & “Low” or “High” Flow

“

A = Low Flow B = High Flow

H = Low Flow D = High Flow

E = Low Flow F= High Flow

G = Low Flow L = High Flow

J = Low Flow K = High Flow



9

“EATON BB” SERIES - PUMPS “SEAL KITS & PARTS”

PART TYPE

CONTENTS SRTP PART #

PART TYPE


Seal Kit Item #’s 1 - 6, 11 & 12

8329 Filter Item #14 814

Resv. O-ring Kit Item #’s 11, 12 8313RK Pulley Not Shown ERS97528

Cartridge Kit - Low Vol.


Will need to order Pump

Cartridge Kit - High Vol.


Will need to order Pump

Shaft Item #8 (No Longer Available) Will need to order Pump

Typical “Eaton BB” Reservoir Parts Breakdown

Typical “Eaton BB” Pump Parts Breakdown



10

“REMANUFACTURED” “EATON U” SERIES - PUMPS

Measure across

Measure D6HZ 3A674C

(E)

(J)

“SRTP” PUMP CODE BREAKDOWN

1) SHAFT LENGTH

2) RETURN PORT

3) PRESSURE PORT

4) BODY SIZE: “LV” = Small Rotor or “HV” = Large Rotor

SRTP NUMBER

G A E LV = “Small Rotor” **100

G B E LV = “Small Rotor” **101-1

G C E LV = “Small Rotor” **101-5

H A E LV = “Small Rotor” **102

H D E LV = “Small Rotor” **103-3

H C E LV = “Small Rotor” **103-5

G A E HV = “Large Rotor” **200

H A E HV = “Large Rotor” **201

H D E HV = “Large Rotor” **203-3

G A J LV = “Small Rotor” **310

H A J LV = “Small Rotor” **315

G A J HV = “Large Rotor” **410

H A J HV = “Large Rotor” **415

4) BODY SIZE: LV = Small Rotor - 1 7/8” thick (Front axle weight Up to 7K)

HV = Large Rotor - 2 1/8” thick (Front axle weight 9K)

1) SHAFT LENGTH: G) = SINGLE PULLEY: Measures approx. 5/8” Long H) = DOUBLE PULLEY: Measures approx. 7/8” long

**When ordering pump, You will need to order Filter #814 if your pump has a Reservoir.

3) PRESSURE PORT:

2) RETURN PORT:

A) No Inlet B) 1/4” N.P.T. C) 5/8” - #18 D) 3/4” - #16 O-ring

A B

NOTE: OEM # maybe stamped here,

However it may not identify pump correctly. Always verify particulars of pump before ordering. See Item

#’s 1 thru 4 for details. Call (281) 386-7229 for Price and

Availability.

Typical “Eaton U” Pumps shown w/ (A) Hose Adapt-er or (B, C & D) Reservoir

for ID purposes only Note: Pumps sold w/o

Reservoir & Hose Adapter

COMMON APPLICATIONS:

Medium Duty Trucks - BLUEBIRD BUS, FORD C, CT,

F, LN & IHC. Loadstar, Workover Rigs, Yard Capacity

C D



11

“EATON U” SERIES - PUMP “SEAL KITS & PARTS”

PART TYPE


PART TYPE


Seal Kit Item #’s 1 - 6 8313 Filter Item #7 814

Reservoir O-ring Kit

Item #’s 5 & 6

8313RK Pulley Item #9 To order correct pulley, We will need to know: (1) Truck Application

(2) Single or Double Belts (3) OD Size & (4) Belt width

Call (281) 386-7229 for Price & Availability.

Cartridge Kit Low Volume


You will need to order a Remanufactured Pump. See previous page for

Pump Identification Chart. Then call (281) 386-7229 For Price & availability.

Cartridge Kit High Volume


You will need to order a Remanufactured Pump. See previous page for

Pump Identification Chart. Then call (281) 386-7229 For Price & availability.



12

“HOBOURN 205” SERIES PUMPS “NEW ONLY”

TO ORDER “HOBOURN 205” Series pumps you will need to know either:

A) MFG. Part Number located on tag as shown in illustration below OR

B) OEM Part Number located on tag as shown in illustration below. NOTE: See page (13) for “Popular Part Numbers” available.

A

B

“HOBOURN 205” SERIES PUMPS “SEAL KITS & PARTS”

NO SEAL KITS AVAILABLE FOR THESE PUMPS. PUMPS CAN ONLY BE PURCHASED NEW!!

CALL (281) 386-7229 FOR “PRICE & AVAILABILITY !



13

“NEW”

“HOBOURN 205” SERIES PUMPS “POPULAR PART NUMBERS”

21506/21533/1

21511/21533/1

21519/22033/1

21591/22033/2

21591/22033/3

21592/22033/1

21592/22033/2

21592/22033/3

21597/22033/1

21597/22033/1

21597/22033/2

21597/22033/3

21598/22033/1

21598/22033/2

21598/22033/3

28584/18027/1

28584/18027/2

28585/18027/1

28587/18027/1

28587/18027/1

28587/18027/1

28587/18027/1

28588/18027/1

Note: For Numbers not Listed, Please call (281) 386-7229

NOTE: IT MAY BE NECESSARY TO ADD THE LETTERS “HE” TO FRONT OF PART NUMBERS SHOWN BELOW.



14

“NEW ONLY”

“HOBOURN 600” SERIES PUMPS

TO ORDER NEW “HOBOURN 600” Series pumps you will need to know either:

A) Mfg. Part Number Casted on Housing as shown in illustration below.

OR B) OEM Part Number located on tag as shown in illustration below.

“HOBOURN 600” SERIES PUMPS “SEAL KITS & PARTS”

A B

Typical “HOBOURN 600” Series

POPULAR NUMBERS

Illustration 1

Illustration 2

Illustration 3

HE1200241 HE1200281 HE1200222/01

HE1200281 HE1206336/002 HE1200224

NO SEAL KITS AVAILABLE FOR THESE PUMPS.

PUMPS CAN ONLY BE PURCHASED NEW!! CALL (281) 386-7229 FOR P&A!!

NOTE: For numbers not listed above, Please call (281) 386-7229 for “Price & Availability.



15

“NEW & REMANUFACTURED

“LUK” PUMPS “LF” & “VT” SERIES

TO ORDER “LUK” Series pumps, Look where the BOLD ARROWS are pointing for the Mfg. Stamped Number located on Metal or Paper tag affixed

to side of pump as shown below in the illustrations

Typical “LUK” Series Pumps

Illustration 1

Illustration 3 Illustration 2



16



“COMMON NUMBERS”

363413 0515894 0863413 2105508 2106362 2106820 2107546 2108186

0363413 515901 863414 2105511 2106363 2106835 2107547 2108204

479598 0515901 863415 2105524 2106388 2106860 2107548 2108321

0479598 515971 0863415 2105777 2106393 2106943 2107550 2108322

515158 0515971 2105273 2105795 2106398 2106961 2107551 2108473

0515158 516156 2105317 2106017 2106399 2106984 2107552 2108494

515411 0516156 2105328 2106018 2106403 2106986 2107553 2108505

0515411 516158 2105333 2106019 2106408 2107203 2107554 2108582

515585 0516158 2105341 2106030 2106438 2107208 2107555 2108655

0515585 516160 2105342 2106031 2106470 2107246 2107556 2108761

515623 0516160 2105343 2106032 2106534 2107262 2107558 2108762

0515623 516195 2105344 2106043 2106752 2107277 2107559 2108763

515788 0516195 2105346 2106061 2106753 2107281 2107560 2108831

0515788 516242 2105347 2106069 2106754 2107323 2107561 2112895

515789 0516242 2105355 2106071 2106754 2107361 2107567 2113023

0515789 516243 2105359 2106072 2106766 2107363 2107611

0515790 0516243 2105360 2106076 2106768 2107457 2107664

515790 516244 2105424 2106191 2106770 2107462 2107666

515840 0516244 2105425 2106218 2106771 2107465 2107669

0515840 516892 2105446 2106255 2106772 2107466 2107691

515857 0516892 2105460 2106260 2106773 2107467 2107878

0515857 0863151 2105474 2106265 2106774 2107479 2107886

515892 863151 2105475 2106266 2106786 2107507 2107922

0515892 863240 2105477 2106274 2106798 2107527 2107989

515893 863369 2105505 2106295 2106811 2107528 2108079

0515893 0863369 2105506 2106339 2106818 2107544 2108146

515894 863413 2105507 2106349 2106819 2107545 2108160




17



PART TYPE CONTENTS SRTP PART NUMBER

Complete Seal Kit (OEM #’s 515775, 0515775)

Item #’s 1 thru 6

8819

Typical “LUK” Pump Parts Breakdown

1

3

2

5

4

6

Note: No Other Parts are available for “LUK” Series Pumps. If additional parts are needed, It will be necessary to Order a Remanufactured or New Pump. Call (281) 386-7229 with number

stamped / stenciled on pump.



18

“PARKER HANNIFIN” PUMPS “H39, H49, H77, H90” Series

These “Parker Hannifin” Pumps have been updated to a “Vickers” series pump. To order a updated Pump (Vickers), Look on side of Mounting Flange for Mfg. Stamped

Number. See illustration below for location of part number. Once you have this number, please call (281) 386-7229 for “Price & Availability”

COMMON “PARKER HANNIFIN” NUMBERS

H39BT2AA21540DS H90BY1CA17560DS

H49BT2AA17560DS H90BY2CA17560DS

H77BT1AA17560DS H90CY1CA17560DS

H77BT2FA17560DS H90CY2CA17560DS

H77BY2CA17560DS



19

“PARKER HANNIFIN” PUMPS “SEAL KITS & PARTS”

PART TYPE


PART TYPE


Shaft Seal - Only Item #1 785087 Note: Call

(281)386-7229 for “P&A”

Seal Kit Item #’s 1 -5 776364K Note: Call

(281)386-7229 for “P&A”

NOTE: There are no other parts available for these pumps.



20

“REXROTH” PUMPS INTERNATIONAL APPLICATIONS

Typical “Rexroth” Pump Illustration shown below.

NOTE: These pumps are “No Longer Available” Must Upgrade to Eaton Type Pump, See next page for details!

“REXROTH” PUMPS “SEAL KITS & PARTS”



21

“REXROTH” to “EATON”

PUMPS

TO

Typical Pumps shown w/o Pulley & Mounting Brackets

APPLICATION ENGINE FRONT AXLE

ORIGINAL INTERNATIONAL

KIT NUMBER

PUMP TYPE SRTP KIT NUMBER

IHC Small V8 w/o AC 345 & 392 Gas

12K 1646860C91 Rexroth to Eaton B

**6864 NOTE: PLEASE CALL AND

CHECK AVAILABILITY!! (281) 386-7229

IHC Small V8w/ AC 345 & 392 Gas

9K 1646860C92 Rexroth to Eaton U



IHC Small V8w/ AC 345 & 392 Gas

12K 1646861C91 Rexroth to Eaton B



IHC DT466 12K 1646862C91 Rexroth to Eaton B



IHC CAT 3208 12K 1646863C91 Rexroth to Eaton B



**NOTE 1: All “Eaton” Conversion Kits are supplied with the Following Components: Remanufactured Pump, Reservoir, Dip Stick, Filter Kit, Pulley and Pump Mounting Brackets

for Engine.

**NOTE 2: Customer will have to supply his own “Belts”, “Hoses”, “Bolts” & “Fittings”.

Typical “REXROTH” Typical “EATON B”



22


“SAGINAW” PUMPS “BIG BEARING” & “BUSHING / SEAL” TYPE

w/o RESERVOIR

5 1/4”

2”

3/4

1”

2”

5 1/4”

5 1/4”

1 1/2”

3/4” Offset Bolt Hole (Note: Measure from outside edge to center of bolt hole)

1” Offset Bolt Hole (Note: Measure from outside edge to center of bolt hole)

Note: It maybe necessary to re-use old pressure fitting due to (2) different sizes being used. See “Pressure Fitting” illustration above.

Big Bearing / Snap Ring

Bushing / Seal Type

SRTP PART #800 NOTE: “Saginaw” pumps supplied with necessary o-rings to service reservoir.

SRTP PART #801 NOTE: “Saginaw” pumps supplied with necessary o-rings to service reservoir.

SRTP PART #900 NOTE: “Saginaw” pumps supplied with

necessary o-rings to service reservoir.

Big Bearing / Snap Ring

Typical “Saginaw Pumps” w/ Res-ervoir shown below. These pumps are shown for Identification pur-poses only. If you need a Pump w/ Reservoir. See next page or order a Reman. w/o Reservoir as shown on right hand side of this page.

Typical “Saginaw Pumps” w/ Res-ervoir shown below. These pumps are shown for Identification pur-poses only. If you need a Pump w/ Reservoir. See next page or order a Reman. w/o Reservoir as shown on right hand side of this page.



23

“NEW”

“SAGINAW” PUMPS w/RESERVIOR

SRTP # 7840124

Common Applications: Chevrolet / GMC & International S-Line’s

w/ Gas, Diesel & DT466 Engines

TO ORDER “SAGINAW” PUMP w/ RESERVOIR, Look where BOLD ARROW is pointing for (7) or (8) digit part number stamped on back of reservoir as shown

below in Illustration (1). (Part # Examples: 7840097, 7840099, 7840124, 26014298 & Etc.)

NOTE: Only certain Part Numbers are available “New”. Call (281) 386-7229 with part number to check Availability. If Part # is not available in “New”, Then inquire about

purchasing a Remanufactured Pump. All Remanufactured Pumps are supplied without the

Reservoir. See previous page for Remanufactured pumps.

SRTP # 7840097

Illustration (1)

Illustration (2) Illustration (3) This style of pump is commonly found on Various Chevy / GMC Applications & IHC. DT466 Engines. IHC. #488787C91



24

“NEW” and “GOOD USED”

“SAGINAW” PUMP RESERVOIRS

RESERVOIRS

Reservoir Assembly: #5688105 Used w/ SRTP Pump #’s:

7841933 & 7840009

Steering Rebuilders & Truck Parts, Inc. offers a variety of “GOOD USED” and “NEW” SAGINAW RESERVOIRS. Unfortunately we are only able to offer just a hand full of the many different styles that were once made. Use the illustrations below to see if we have what you need. We will need to know the (7) or (8) digit Mfg. Stamped number or Number off of White Tag located on back or side of Reservoir. Look where the BOLD ARROWS are pointing. All

reservoirs are viewed from the back. CALL (281) 386-7229 for Price & Availability.

IILLUSTRATION (F)

Reservoir Assembly: #7827542 Used w/ SRTP Pump #:

7840087

IILLUSTRATION (E) IILLUSTRATION (D)

IILLUSTRATION (C) IILLUSTRATION (A)


7840124

IILLUSTRATION (B)


7847871


7840113


7840097 & 7840127



25

“SAGINAW” P235 PUMPS “SEAL KITS & PARTS”

PART TYPE

CONTENTS SRTP PART NUM.

PART TYPE

CONTENTS SRTP PART NUM.

Seal Kit Item #’s 1 thru 8

8317 Shaft & Bearing Assembly

Item #’s 9, 9A

5692679

Pressure Plate Item #11 7839669 Shaft Seal Item #8 5692683

Thrust Plate Item #10 7836369 Valve Assembly Item #13 5691948

Ring / Rotor Kit Item #12 7837324 Reservoir Seal Kit Item #’s 1 & 2 8317RK

Typical “Saginaw” Pump Breakdown

9A

Parts shown above are for SRTP #’s 800, 801, 7840097, 7840099, 7840124, 7840127 & Etc.



26

“NEW”

FORD “BRAKE BOOSTER PUMPS” F600/700 & LN600/700

TO ORDER “FORD” BRAKE BOOSTER PUMPS, Look where “BOLD ARROW” is pointing for part number needed as shown in illustration below:

(Example: 7844344, 26041872 and Etc.) Call 281/386-7229 for “Price & Availability.

“Brake Booster” w/Reservoir #26041872 (Reservoir Viewed from back)

For complete Pump w/ Reservoir Assy.

Order SRTP #26041872

“Brake Booster” w/Reservoir #7844344 (Reservoir Viewed from back)

For complete Pump w/ Reservoir Assy.

Order SRTP #26134952

TYPICAL “BRAKE BOOSTER” PUMP

ORIGINAL OEM # NEW OEM # SRTP # New Pump w/ Resv.

SRTP # Rem. Pump w/ Resv.

SRTP # Rem. Pump w/o Resv.

7844344 7844343 26134952 26134952RMX 145MRX

26041872 Same Same 26041872RMX 145MRX

26080198 26134952 26134952 26134952RMX 145MRX



27

“REMANUFACTURED

“TRW” PUMPS “OLD SLIPPER STYLE” - LATE 1960’s to EARLY 1970’s (DODGE, FORD & IHC.)

INTERNATIONAL APPLICATIONS Years: Late 1960’s to Early 1970’s

3 Bolt Front Mount - Threaded / Keyway Shaft NOTE: THIS PUMP MAYBE “R&R” ONLY PROVIDED PARTS ARE AVAILABLE.

CALL (281) 386-7229 TO CHECK “PRICE & AVAILABILITY”

NOTE: “TRW” pumps supplied with necessary o-rings to service reservoir.

SRTP #700

DODGE / FORD APPLICATIONS Years: Late 1960’s - Early 1970’s

2 Bolt Side Mount - Hex or Slotted Shaft NOTE 1: These (2) pumps will interchange one with the other.

NOTE 2: THIS PUMP MAYBE “R&R” ONLY PROVIDED PARTS ARE AVAILABLE. CALL (281) 386-7229 TO CHECK “PRICE & AVAILABILITY”

Slotted Shaft (Press on Pulley)

Hex Shaft (Press on Pulley)

2 Bolt Side Mount

3 Bolt Front Mount

Threaded / Keyed Shaft

(Bolt on Pulley)

NOTE: “TRW” pumps supplied with necessary o-rings to service reservoir.

SRTP #702



28

“NEW” & “REMANUFACTURED”

“TRW” PUMPS “EV” & “PS” SERIES

TO ORDER “TRW” PUMPS, look for (A) Mfg. Stamped / Stenciled part number and / or (B) Tag number as shown in illustrations below.

Example Part Numbers: EV181614R103, PS28241516L105

Typical TRW “EV” & “PS” Series Pumps

B

ILLUSTRATION (1) ILLUSTRATION (3)ILLUSTRATION (2)

A

A



29

“NEW” & “REMANUFACTURED”



Note: Call (281) 386-7229 for “Price & Available” and for

Part Numbers not listed.

PS181415L103 PS252415R114

PS181615R102 PS282416L106

PS181615R114 PS282416R105

PS181616L206 PS282815L103

PS221615L103 PS282815L114

PS221615L116 PS282815R102

PS221615R114 PS322415L105

PS251613R105 PS322815L105

PS251615L103 PS362415L111

PS251615L105 PS362415R102

PS251615L111 PS362415R105

PS251615L113 PS362415R405

PS251615L116 PS362815L103

PS251615R102 PS362815L105

PS251615R103 PS362815L113

PS251615R105 PS362815R102

PS251615R405 PS362815R405

PS252415L103 PS363415L105



30


“SEAL KITS & MISC.”

UNIT TYPE PART TYPE SRTP PART NUMBER

“EV” & “PS” Series Pumps

Seal Kit Includes #’s 2, 5, 8, 11, 17

8828

Note: No Other Parts are available for “EV & PS” Series Pumps. If additional parts are needed, It will be necessary to Order a Remanufactured or New Pump.

Call (281) 386-7229 with Mfg. Number stamped or stenciled on pump. See Page #28 “TRW PUMPS” for info on where to locate Part Number.

1 - Housing 8 - O-ring 15 - Pins

2 - Shaft Seal 9 - Spring 16 - Cam Ring

3 - Valve Assy. 10 - Pres. Plate 17 - O-ring

4 - Spring 11 - O-ring 18 - End Cover

5 - O-ring 12 - Rotor 19 - Bolts

6 - Plug 13 - Vanes 20 - Orifice

7 - Shaft 14 - E Ring 21 - Snap Ring

Typical “EV & PS” Pump Parts Breakdown



31

“REMANUFACTURED & NEW”

“VICKERS” PUMPS “V10, V20, V210, V230, VTM” SERIES

TO ORDER “VICKERS” PUMPS, you will need to know either: Illustration (A) Mfg. Part Number Stenciled located on aluminum tag.

(NOTE: it may be necessary to wire brush the area)

Or Illustration (B) Mfg. Part number stamped on back of pump body

(It may be necessary to wire brush the area).

CAUTION: DO NOT SUBSTITUTE “V10F” with a “V10NF” and “V20F” with a “V20NF. “V10F” & “V20F” uses 3 hoses and “V10NF” & “V20NF” uses 2 hoses.

CAUTION:

Do not sell “VTM” series pumps for “GM” applications without getting technical assistance.

Most “GM” models require less pressure and flow. NOTE: To

much pressure and flow can cause series damage to the system. Call 281-386- 7229 for details.

Illustration (A)

Illustration (B)

COMMON “VICKERS” PUMPS

TYPICAL

V10, V10F, V10NF

TYPICAL

VTM27, VTM42

TYPICAL

V20, V20F, V20NF

#1 Straight

Keyed

Shaft

#3 Threaded

Keyed

Shaft

#38

11 Spline

Shaft

Typical “Vickers V20” Style Shafts

Typical VTM27, 42 Shown w/ Reservoir. Pumps are sold w/o Reservoir and Hose Adapter.



32

UNIT SERIES


UNIT SERIES


V10F Seal Kit - (Includes #’s 1 & 2)

8314

V20F Seal Kit - (Includes #’s 1 & 2)

8315

V10F Shaft - 11 Spline (Cummins) #7

387481

V20F Shaft - 11 Spline (Cummins) #7

328096

V10F Shaft Bearing - #8 6203

V20F Shaft - Straight Key (Detroit) #7

280372

V10F Cartridge Kit (Includes #’s 9, 10, 11)

**Call for Part #

(281)386-7229 V20F Shaft - (Threaded

w/ Keyway) #7

280504

V20F Shaft Bearing - #8 6204

V20F Cartridge Kit (Includes #’s 9, 10, 11)

**Call for Part #

(281)386-7229

**You will need the Mfg. Stamped Number off of pump to order Cartridge Kit. See previous

page for information on where to locate part number.

Typical “V10F & V20F” Pump Parts Breakdown

“VICKERS” PUMPS “V10F & V20F” SERIES

“SEAL KITS & PARTS”



33

UNIT SERIES

PART TYPE

SRTP NUMBER

UNIT SERIES

PART TYPE

SRTP NUMBER

VTM Seal Kit (Includes #’s 6, 7, 8, 9, 10)

922904

VTM Filter Element (Not Shown)

213984

VTM Shaft Seal - #6 263585 VTM Cartridge Kit (Includes #’s

13, 14, 15)

**Call for Part #

281/386-7229

“VICKERS” PUMPS “VTM42” SERIES “SEAL KITS & PARTS”

**You will need the Mfg. Stamped Number off of pump to order Cartridge Kit. See previous

page to get info on where to locate part number.

Typical “VTM” Pump Parts Breakdown



34


“ZF LENKSYSTEME” PUMPS “CAST IRON TYPE”

TO ORDER ZF PUMPS, Look in the AREAS where the “BOLD ARROWS” are pointing for the (10) digit number needed.

Example: 767####### or 768#######

Mfg. Number will be located on an Aluminum Tag. (Refer to Tag Illustration below)

Typical “Gas” Applications (Pulley Drive)

ILLUSTRATION (4)

Typical “Cummins / Cat. Applications

Typical “6.6L & 7.8L Applications

Typical “3306 Caterpillar” Applications (Gear Drive)

ILLUSTRATION (1) ILLUSTRATION (2)

ILLUSTRATION (3)



35


“ZF LENKSYSTEME” PUMPS “CAST IRON TYPE”

“POPULAR NUMBERS”


7674900101 7674974103

7674900112 7674974105

7674955133 7674974106

7674955145 7674974107

7674955154 7674974109

7674955159 7674974110

7674955164 7674974909

7674955250 7674974910

7674955251 7674974920

7674955252 7674974923

7674955253 7674975916

7674955272 7674975920

7674955273 7677955115

7674955275 7677955179

7674955290 7677955180

7674955328 7677955181

7674955343 7677955187

7674955344 7677974103

7674955913 7677974104

7674955928 7677974105

7674955939 7677974106

7674974101



36

“ZF LENKSYSTEME” PUMPS “SEAL KITS & PARTS” for

UNIT SERIES #’s 7673900##, 7673955##, 7674900##, 7674955##, 7674974## & 7677955##

NOTE 1: To Order Parts, We will need to know the Mfg. Stamped / Stenciled Number off of the Metal Tag affixed to side of pump. See Page #34 “ZF LENKSYSTEME” PUMPS “CAST IRON

TYPE” on where to locate Part Number.

NOTE 2: No Other Parts are available for “ZF Lenksysteme” Series Pumps. If additional parts are needed, It will be necessary to Order a Remanufactured or New Pump. Call

(281) 386-7229 with number stamped on metal tag.

Typical “ZF” Pump Parts Breakdown

UNIT SERIES (TAG NUM.)

PART TYPE

SRTP NUMBER

UNIT SERIES (TAG NUM.)

PART TYPE

SRTP NUMBER

7673900### Seal Kit 8814 7674955### Seal Kit 8815

7673955### Seal Kit 8820 7674974### Seal Kit 8812

7674900### Seal Kit 8815 7677955### Seal Kit 8813

All #’s Cartridge Assy.

Call 281/386-7229 for “P&A”

All #’s Drive Shaft Call 281/386-7229 for ”P&A”



37


“ZF LENKSYSTEME” PUMPS “ALUMINUM TYPE”

TO ORDER ZF PUMPS, look for Mfg. Stamped Number on ALUMINUM TAG (Refer to Pump Illustrations below) Look in the AREAS where the “BOLD

ARROWS” are pointing for the (10) digit number needed. Example: 7685955744, 7685955708 & Etc.

TYPICAL “ALUMINUM” PUMPS

Typical “Gear Drive” for 3116, 3126 Cat. Engines

Typical “11 Spline” for Caterpillar, Cummins Engines

Back View


Back View

(Up close)




38


“ZF LENKSYSTEME” PUMPS “ALUMINUM TYPES”


7684955739

7684955740

7684955741

7685955202

7685955288

7685955301

7685955755

7685955759

7685955768

7685955794

7685955807

7686955139

7686955189

7686974702


Documents

STEERING REBUILDERS & TRUCK PARTS, INC. 764 …srtp.us/yahoo_site_admin/assets/docs/Catalog_Pumps_-May...“S.R.T.P., INC” STEERING REBUILDERS & TRUCK PARTS, INC. 764 CR 383 - CLEVELAND,