1
37 Toll Free - USA & Canada (800) 562-8782 Order Your Catalogs & Parts Online www.LMCTrUCk .com STEErING Power rack and Pinion Steering kit Power Rack and Pinion Steering Kit is bolt-on with the rack mounts using the same mounting location as the original steering gear and idler arm. The rack has been made with the correct ball center dimension to eliminate bump steer, reduce steering effort and greatly improve handling and overall feel. Kits are designed to fit 1/2 ton 2WD trucks with small block Chevy V8 engines with short water pump. Trucks originally equipped with manual steering will need a double groove water pump pulley, sold separately below. Kits include Power Rack and Pinion with mounting bracket; Outer Tie Rod Ends; Power Steering Pump Kit which includes pump, mounting brackets, remote reservoir and hoses; Steering Shaft Kit which includes steering shaft and U-joints; mounting hardware and instructions. 34-0990 34-0978 34-0979 Steering Wheel Puller features forged, milled yoke and center screw with pointed/removable adaptor. Includes five sets of bolts in standard and metric sizes. Can also be used to remove pulleys, flanges and gears. The Pitman Arm Puller features a forged, heat- treated steel yoke that is designed to wrap securely around the pitman arm to allow for easy removal. Heavy-duty center screw has pointed tip and 3/4" hex head. Opening: 1-5/16" (33mm). Depth: 2-1/2" (64mm). Manual Steering Gear 1960-66 Chevy & GMC Truck Core refund Information - Steering Gear: A rebuildable core will have no excessive wear. No disassembled units. No worn, broken, scored, damaged, cracked, frozen or rusted housings. No broken or damaged mounting points. If it does not meet the above standards, it is not rebuildable and will not be refunded. DO NOT send a non-rebuildable core. 34-1005-Z 1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20 21 14 Steering Column Components 1960-66 Chevy & GMC Truck Steering Wheel Puller See Below Note: "A" Does not fit deluxe models with horn ring. "B" Fits models with Powerglide transmission. "C" Fits models without tilt wheel. Steering Wheel Puller 38-1199 Pitman Arm Puller Polyurethane Tie rod Boots Replacements for when disassembly ruins existing rubber boots. Lasts longer, seals longer and looks better. They seal out contaminants and prevent loss of lubricant. 34-0299 PART DESCRIPTION APPLICATION REQD PRICE 34-0990 POWER RACK & PINION KIT W/DISC BRAKES 60-66 (1) $1449.95 34-0978 WATER PUMP PULLEY-2 GROOVE BLACK 60-66 (AR) $59.95 34-0979 WATER PUMP PULLEY-2 GROOVE POLISHED 60-66 (AR) $64.95 PART DESCRIPTION PRICE 38-1199 STEERING WHEEL PULLER $24.95 PART ILL# DESCRIPTION APPLICATION REQD PRICE 34-0396-BL (1) STEERING WHEEL "A" CHEVY GMC 60-66 (1) $299.95 34-0418 (2) HORN BUTTON CAP W/SEAL "A" CHEVY 60-66 (1) $59.95 32-7205 (3) INDICATOR HOUSING "B" CHEVY GMC 62-66 (1) $9.95 32-7206 (4) SHIFT INDICATOR "B" CHEVY GMC 62-66 (1) $7.95 36-0230 (5) BULB-CLEAR "B" CHEVY GMC 62-66 (1) $.95 30-0487 (6) SCREW CHEVY GMC 62-66 (2) $.95 34-0787 (7) TURN SIGNAL LEVER & KNOB CHEVY GMC 60 (1) $14.95 34-0788 (8) TURN SIGNAL LEVER & KNOB CHEVY GMC 61-62 (1) $14.95 34-0789 (9) TURN SIGNAL LEVER & KNOB CHEVY GMC 63-66 (1) $14.95 34-0713 (10)SHIFT LEVER 3SPD MT CHEVY GMC 60-66 (1) $26.95 30-2633 (11)SHIFT LEVER KNOB 3SPD MT CHEVY GMC 60-66 (1) $9.95 34-0761 (12)SIGNAL CANCEL PLATE "C" CHEVY GMC 60-66 (1) $12.95 34-0411 (13)HORN CAP RETAINER W/CONTACT CHEVY GMC 60-66 (1) $16.95 34-0405 (14)HORN SPRING BUSHING CHEVY GMC 60-66 (1) $6.95 34-0050 (15)SIGNAL MECHANISM KIT CHEVY GMC 60 (1) $37.95 34-0051 SIGNAL MECHANISM KIT CHEVY GMC 61-62 (1) $37.95 34-0702 (16) BOLT W/WASHER CHEVY GMC 60-62 (3) $3.95 34-0770 (17)TURN SIGNAL CAM W/O TILT CHEVY 63 (1) $8.95 34-0770 TURN SIGNAL CAM W/O TILT GMC 63-66 (1) $8.95 34-0771 (18)TURN SIGNAL CAM W/O TILT CHEVY 64-66 (1) $8.95 30-2386 (19)STEERING COLUMN SEAL CHEVY GMC 60-62 (1) $3.95 34-0848 (20)LOWER BEARING-STEERING COL CHEVY GMC 60-66 (1) $26.95 30-1282 (21)GROMMET-SHIFT ROD CHEVY GMC 60-66 (2) $4.45 PART DESCRIPTION PRICE 34-2202 PITMAN ARM PULLER $19.95 PART DESCRIPTION APPLICATION REQD PRICE 34-0299 TIE ROD END BOOT SET 2WD CHEVY GMC 63-66 (1) $4.95 PART DESCRIPTION APPLICATION REQD PRICE 34-1005 STEERING GEAR-NEW 2WD 60-66 (1) $499.95 34-1005-Z STEERING GEAR-REMAN 2WD $125 CORE 60-66 (1) $299.95

STEErING 37 - LMC Truckmedia.lmctruck.com/pdf/CBE/0037.pdf · STEErING Power rack and Pinion Steering kit Power Rack and Pinion Steering Kit is bolt-on with the rack mounts using

  • Upload
    vodan

  • View
    233

  • Download
    0

Embed Size (px)

Citation preview

Page 1: STEErING 37 - LMC Truckmedia.lmctruck.com/pdf/CBE/0037.pdf · STEErING Power rack and Pinion Steering kit Power Rack and Pinion Steering Kit is bolt-on with the rack mounts using

37

Toll Free - USA & Canada (800) 562-8782Order Your Catalogs & Parts Online www.LMCTrUCk .com

STEErINGPower rack and Pinion Steering kit

Power Rack and Pinion Steering Kit is bolt-on with the rack mounts using the same mounting location as the original steering gear and idler arm. The rack has been made with the correct ball center dimension to eliminate bump steer, reduce steering effort and greatly improve handling and overall feel. Kits are designed to fit 1/2 ton 2WD trucks with small block Chevy V8 engines with short water pump. Trucks originally equipped with manual steering will need a double groove water pump pulley, sold separately below.

Kits include Power Rack and Pinion with mounting bracket; Outer Tie Rod Ends; Power Steering Pump Kit which includes pump, mounting brackets, remote reservoir and hoses; Steering Shaft Kit which includes steering shaft and U-joints; mounting hardware and instructions.

34-0990

34-0978 34-0979

Steering Wheel Puller features forged, milled yoke and center screw with pointed/removable adaptor. Includes five sets of bolts in standard and metric sizes. Can also be used to remove pulleys, flanges and gears.

The Pitman Arm Puller features a forged, heat-treated steel yoke that is designed to wrap securely around the pitman arm to allow for easy removal. Heavy-duty center screw has pointed tip and 3/4" hex head. Opening: 1-5/16" (33mm). Depth: 2-1/2" (64mm).

Manual Steering Gear1960-66 Chevy & GMC Truck

Core refund Information - Steering Gear: A rebuildable core will have no excessive wear. No disassembled units. No worn, broken, scored, damaged, cracked, frozen or rusted housings. No broken or damaged mounting points. If it does not meet the above standards, it is not rebuildable and will not be refunded. DO NOT send a non-rebuildable core.

34-1005-Z

1

2

3

4

5

6

7

8

9

10 11

12

13

15

16

17 18

19

20

21

14

Steering Column Components1960-66 Chevy & GMC Truck

Steering Wheel Puller

See Below

Note: "A" Does not fit deluxe models with horn ring. "B" Fits models with Powerglide transmission. "C" Fits models without tilt wheel.

Steering Wheel Puller

38-1199

Pitman Arm Puller

Polyurethane Tie rod Boots

Replacements for when disassembly ruins existing rubber boots. Lasts longer, seals longer and looks better. They seal out contaminants and prevent loss of lubricant. 34-0299

PART DESCRIPTION APPLICATION REQD PRICE34-0990 POWER RACK & PINION KIT W/DISC BRAKES 60-66 (1) $1449.9534-0978 WATER PUMP PULLEY-2 GROOVE BLACK 60-66 (AR) $59.9534-0979 WATER PUMP PULLEY-2 GROOVE POLISHED 60-66 (AR) $64.95

PART DESCRIPTION PRICE38-1199 STEERING WHEEL PULLER $24.95

PART ILL# DESCRIPTION APPLICATION REQD PRICE34-0396-BL (1) STEERING WHEEL "A" CHEVY GMC 60-66 (1) $299.95 34-0418 (2) HORN BUTTON CAP W/SEAL "A" CHEVY 60-66 (1) $59.95 32-7205 (3) INDICATOR HOUSING "B" CHEVY GMC 62-66 (1) $9.9532-7206 (4) SHIFT INDICATOR "B" CHEVY GMC 62-66 (1) $7.95 36-0230 (5) BULB-CLEAR "B" CHEVY GMC 62-66 (1) $.9530-0487 (6) SCREW CHEVY GMC 62-66 (2) $.95 34-0787 (7) TURN SIGNAL LEVER & KNOB CHEVY GMC 60 (1) $14.9534-0788 (8) TURN SIGNAL LEVER & KNOB CHEVY GMC 61-62 (1) $14.9534-0789 (9) TURN SIGNAL LEVER & KNOB CHEVY GMC 63-66 (1) $14.95 34-0713 (10)SHIFT LEVER 3SPD MT CHEVY GMC 60-66 (1) $26.9530-2633 (11)SHIFT LEVER KNOB 3SPD MT CHEVY GMC 60-66 (1) $9.95 34-0761 (12)SIGNAL CANCEL PLATE "C" CHEVY GMC 60-66 (1) $12.95 34-0411 (13)HORN CAP RETAINER W/CONTACT CHEVY GMC 60-66 (1) $16.9534-0405 (14)HORN SPRING BUSHING CHEVY GMC 60-66 (1) $6.95 34-0050 (15)SIGNAL MECHANISM KIT CHEVY GMC 60 (1) $37.9534-0051 SIGNAL MECHANISM KIT CHEVY GMC 61-62 (1) $37.9534-0702 (16) BOLT W/WASHER CHEVY GMC 60-62 (3) $3.95 34-0770 (17)TURN SIGNAL CAM W/O TILT CHEVY 63 (1) $8.9534-0770 TURN SIGNAL CAM W/O TILT GMC 63-66 (1) $8.9534-0771 (18)TURN SIGNAL CAM W/O TILT CHEVY 64-66 (1) $8.95 30-2386 (19)STEERING COLUMN SEAL CHEVY GMC 60-62 (1) $3.95 34-0848 (20)LOWER BEARING-STEERING COL CHEVY GMC 60-66 (1) $26.95 30-1282 (21)GROMMET-SHIFT ROD CHEVY GMC 60-66 (2) $4.45

PART DESCRIPTION PRICE34-2202 PITMAN ARM PULLER $19.95

PART DESCRIPTION APPLICATION REQD PRICE34-0299 TIE ROD END BOOT SET 2WD CHEVY GMC 63-66 (1) $4.95

PART DESCRIPTION APPLICATION REQD PRICE34-1005 STEERING GEAR-NEW 2WD 60-66 (1) $499.95 34-1005-Z STEERING GEAR-REMAN 2WD $125 CORE 60-66 (1) $299.95