STEEL WATER TANKS...of Steel water storage tanks, complete with Tas Fire approved 65mm Storz connection fittings and mandatory ‘W’ sign. GRT10000-S All Orion Australia galvanised

STEEL WATER TANKS

[email protected] orionaustralia.com.au1800 752 784

1800 752 784

[email protected]

orionaustralia.com.au

Welcome!

Orion Australia P/L is Tasmania’s leading innovator and manufacturer of steel rainwater tanks and related products.

Since 1998, we’ve been dedicated to providing water storage and conservation solutions backed by top quality service and products.

Our team are 100% committed to you our client, and we look forward to the opportunity to work with you.

Thank you, and please read on.

DIFFERENT. BETTER. GUARANTEED.

Using Z600 grade galvanised corrugated steel for longevity in

the harsh Australian outdoors, each tank is professionally constructed by

experienced tank-makers.

TASMANIAN MADE TANKS USING AUSTRALIAN MADE STEEL.

STEEL RAINWATER

TANKS


CODE CAPACITY (LITRES) MATERIALDIAMETER

(mm)INLET HEIGHT

(mm) OUTLET SIZE OUTLET

POSITIONOVERFLOW POSITION

GRT900-B 900 Galvanised Steel 1240 770 1 x 50mm 12:00 Supplied loose













GALVANISED STEEL TANKS

As iconic as the Australian Bush itself, the Orion Australia range of galvanised steel rainwater tanks are available in a large range of standard sizes and configurations. Should our standard size range not fit your exact requirements, why not have us customise the size to your needs?

All Orion Australia galvanised steel tanks are:

• Made in Tasmania, using Australian steel.• Sealed internally, using AS4020 (potable water)

compliant sealant.• Water tested prior to despatch.

GRT10000-B

GRT8200-B


(mm)INLET HEIGHT



GRT10000-S 10000 Galvanised Steel 2600 2020 1 x 50mm 12:00 Supplied loose

AQT10000-S 10000 Aquaplate 2600 2020 1 x 50mm 12:00 Supplied loose


AQT20000-S 20000 Aquaplate 3400 2310 1 x 50mm 12:00 Supplied loose

LARGE RANGE OF CUSTOMISED SIZES AVAILABLE – PLEASE ENQUIRE.

GRT20000-S (shown with optional

high level outlet)

FIRE FIGHTING TANKS

To comply with local Tasmanian Bushfire Attack Level assessment requirements, Orion Australia manufacture and supply a purpose-built range of Steel water storage tanks, complete with Tas Fire approved 65mm Storz connection fittings and mandatory ‘W’ sign.

GRT10000-S

All Orion Australia galvanised steel tanks are:

• Made in Tasmania, using Australian steel.• Supplied with nickel plated ball valve and

65mm Storz connection fitting• Sealed internally, using AS4020 (potable

water) compliant sealant.• Water tested prior to despatch.

GRT10000-S


(mm)INLET HEIGHT



AQT900-B 900 Aquaplate Steel 1240 770 1x50mm / 2” 12:00 Supplied loose













COLORBOND TANKS

Ideally suited to a huge variety of situations, corrugated steel tanks can either contrast or match perfectly in both traditional and contemporary settings. A large range of colours is available from Orion Australia – please enquire!

All Orion Australia Aquaplate steel tanks are:

• Made in Tasmania, using Australian steel.• Sealed internally, using AS4020 (potable water)

compliant sealant.• Water tested prior to despatch.

GRT8200-B

AQT12500-B

AQT2850-BAQT3400-B

Due to variations in printing process, colours shown may not be a true representation of actual colour. Please confirm at time of order.

COLORBOND TANK COLOURS AVAILABLE:

Off WhiteSurf Mist™

Armour GreyWindspray®

Mountain BlueDeep Ocean®

Mist GreenPale Eucalypt®

Heritage GreenCottage Green®

Smooth CreamClassic Cream®

MerinoPaperbark®

Heritage RedManor Red®

Slate GreyWoodland Grey®

Monument GreyMonument®

Tank Planner Diagram

12

6

39


1800 752 784

[email protected]

orionaustralia.com.au

24279

HOW TO PREPARE A BASE FOR STEEL TANKSOrion Australia Warranty Terms and Conditions require the preparation of a good quality base pad for steel rainwater tanks.

Unlike moulded tanks, steel tanks are manufactured from several pieces of formed steel, which are sealed from the inside once the tank is constructed.

An inadequate or poorly constructed base may allow the tank to deform when the tank is filled, resulting in perforation of the internal seal and consequent leaking.

Our recommended base construction procedure:1. Construct retaining

edge from 90x19mm treated pine or similar. Ensure overall size (LxW) is 200mm greater than the tank diameter.

2. Position retaining edge, ensuring that it is level in both directions. If necessary, fasten the retaining edge to steel star posts to prevent movement and ensure that it remains level in both directions.

3. Fill the base area with FCR (fine crushed rock). 7mm ‘blue metal’ screenings are ideal, as they allow ground water to drain freely beneath the tank which minimizes opportunity for rust.

4. Compact fill and screed level with retainer edge.

5. When tank is placed on base, ensure that the base fill material supports the base of the tank all around the perimeter.

6. Orion Australia does not take responsibility for tank failure due to an inadequate or poorly constructed base.

Contact the Customer Support Team at Orion Australia for further details and more clues for rainwater conservation.

Documents

STEEL WATER TANKS...of Steel water storage tanks, complete with Tas Fire approved 65mm Storz connection fittings and mandatory ‘W’ sign. GRT10000-S All Orion Australia galvanised