Steel Part Catalog

8/9/2019 Steel Part Catalog

1/116


2/116


3/116


4/116


5/116


6/116


7/116


8/116


9/116


10/116


11/116


12/116


13/116


14/116


15/116

tower applications

customer service center call us toll free 1-800-255-1479 fax 1-800-349-5444 visit us at: www.andrew.com

dish stand-off bracket Application: Lattice towersSize: 24" (0.6 m) stand-offDesign: One-piece welded stand-offFeature: 3" OD (76.2 mm) pipe for dishes

Mounts to: Straight or tapered legs up to 3-1/2" (88.9 mm) ODMaterial: Hot dip galvanized steelIncludes: Stand-off and clampsOrder Separately:Larger clamp sets

Ordering Information

Part Number Description Wt. lb Wt. kg Kit QtDM-100 Dish Stand-off Bracket, 24" (0.6 m) 31 14.3 Each

pipe-to-pipe clamps Application: Antenna mountingSize: Four versions (see table)Design: Light weight 1/4" half-clamp set or 1/2" heavy

duty half-clamp setsFeature: Versatile parallel connectionsMounts to: See tableMaterial: Hot dip galvanized steelIncludes: Half clamps and threaded rodOrder Separately:Pipe or stand-off brackets


Part Number Description Wt. lb Wt. kg Kit QtBC-20-10 Pipe-to-Pipe Clamp. Joins two 1-1/2" OD to 8 3.6 Kit of 2

3-1/2" OD (38.1 mm OD to 88.9 mm OD)round members. 1/2" x 10"(12.7 mm x 254 mm) threaded rod.

BC-30-10 Pipe-to-Pipe Clamp, Heavy Duty. Joins two 12 5.4 Kit of1-1/2" OD to 3-1/2" OD (38.1 mm OD to88.9 mm OD) round members. 1/2" x 10"(12.7 mm x 254 mm) threaded rod.

BC-35-14 Pipe-to-Pipe Clamp, Heavy Duty. Joins two 27 12.2 Kit of2-3/8"OD to 5" OD (60.3 mm OD to127 mm OD) round members. 5/8" x 14"(15.9 mm x 0.4 m) threaded rod.

BC-40-16 Pipe-to-Pipe Clamp, Heavy Duty. Joins two 4" 36 16.3 Kit ofto 9" OD (101.6 mm OD to 228.6 mm OD)round members. 5/8" x 16" (15.9 mm x 0.4 m)threaded rod.


16/1161

tower applications


welded pipe-to-pipe clamps Application: Antenna mountingSize: Two versions (see table)Design: Welded half-clampFeature: Heavy duty parallel connections

Mounts to: See tableMaterial: Hot dip galvanized steelIncludes: Half clamps and threaded rodOrder Separately:Pipe or stand-off brackets


Part Number Description Wt. lb Wt. kg KitBB-S10-10 Welded Pipe-to-Pipe Clamp, Heavy Duty. 13 5.9 Kit

Joins two 1-1/2" OD to 3-1/2" OD(38.1 mm OD to 88.9 mm OD) round members.1/2" x 10" (12.7 mm x 254.0 mm) threaded rod.

BB-S20-14 Welded Pipe-to-Pipe Clamp, Heavy Duty. 27 12.2 Kit Joins two 2-3/8" OD to 5" OD (60.3 mm ODto 127.0 mm OD) round members. 5/8" x 14"(15.9 mm x 0.4 m) threaded rod.

pipe-to-pipe adapters Application: Antenna mountingSize: Ten versions (see table)

Design: Welded half-clampFeature: Straight and tapered versionsMounts to: See tableMaterial: Hot dip galvanized steelIncludes: Half clamps and threaded rodOrder Separately:Pipe or stand-off brackets


Part Number Description Wt. lb Wt. kg Kit

Pipe-to-Pipe Adapters for Vertical Members

AB-S50 Pipe-to-Pipe Adapter. Adapts 1-1/2" to 18 8.2 Kit o3-1/2" OD (38.1 mm to 88.9 mm OD) pipe to2-3/8" to 5" OD (60.3 mm to 127.0 mm OD) pipe.

MS-100 Pipe-to-Pipe Adapter. Adapts 1-1/2" 25 11.3 Kit ofto 3-1/2" OD (38.1 mm to 88.9 mm OD) pipe to4" to 9" OD (101.6 mm to 228.6 mm OD) pipe.

JS-S100 Pipe-to-Pipe Adapter. Adapts 2-3/8" to 4" OD 32 14.5 Kit o(60.3 mm to 101.6 mm OD) pipe to 4" to 9" OD(101.6 mm to 228.6 mm OD) pipe.

LS-100 Pipe-to-Pipe Adapter. Adapts 1-1/2" to 3-1/2" 43 19.5 Kit oOD (38.1 mm to 88.9 mm OD) pipe to 8" to 16"OD (203.2 mm to 0.4 m OD) pipe.

LM-100 Pipe-to-Pipe Adapter. Adapts 4" to 9" OD 53 24.1 Kit (101.6 mm to 228.6 mm OD) pipe to 8" to16" OD (203.2 mm to 0.4 m OD) pipe.

Pipe-to-Pipe Adapters for Tapered Members

AB-S50-SSH Tapered Pipe-to-Pipe Adapter. Adapts 1-1/2" to 28 12.7 Ki t3-1/2" OD (38.1 mm to 88.9 mm OD)pipe to 2-3/8" to 5" OD to 127.0 mm OD) pipe.

MS-100-SSH Tapered Pipe-to-Pipe Adapter. Adapts 1-1/2" to 35 15.9 Ki t 3-1/2" OD (38.1 mm to 88.9 mm OD) pipe to 4"to 9" OD (101.6 mm to 228.6 mm OD) pipe.

JS-S100-SSH Tapered Pipe-to-Pipe Adapts 2-3/8" to 4" OD 40 18.1 Kit (60.3 mm to 101.6 mm OD) pipe to 4" to 9" OD(101.6 mm to 228.6 mm OD) pipe.

LS-100-SSH Tapered Pipe-to-Pipe Adapter. Adapts 1-1/2" to 55 24.9 Ki t3-1/2" OD (38.1 mm to 88.9 mm OD) pipe to 8"to 16" OD (203.2 mm to 0.4 m OD) pipe.

LM-100-SSH Tapered Pipe-to-Pipe Adapter. Adapts 4" to 9" 66 29.9 KiOD (101.6 mm to 228.6 mm OD) pipe to 8" to16" OD (203.2 mm to 0.4 m OD) pipe.


17/116

tower applications


adjustable pipe mounts Application: Lattice towersSize: 2-3/8" (60.3 mm) or 4-1/2" (114.3 mm) ODDesign: Pipe with adjustable mounting bracketFeature: Straight or tapered mounts with adjustable spacing

Mounts to: Saddle mountsMaterial: Hot dip galvanized steelIncludes: Pipe, bracket, and hardwareOrder Separately:Saddle mount

Wind Rating*:120 mph per latest revision of TIA/EIA 222 at 150 AGL

*Typical installation of (1) 96 x 8 panel antenna per pipe mount


Part Number Description Wt. lb Wt. kg Kit Qt

Adjustable Pipe Mount Kits, 2-3/8" ODPM-238-48 Adjustable Pipe Mount, 2-3/8" OD x 48" 14 6.4 Each

(60.3 mm OD x 1.2 m)PM-238-72 Adjustable Pipe Mount, 2-3/8" OD x 72" 21 9.5 Each



(60.3 mm OD x 2.4 m)

Adjustable Tapered Pipe Mount Kits, 2-3/8" ODPM-238T-48 Adjustable Tapered Pipe Mount, 14 6.4 Each

2-3/8" OD x 48" (60.3 mm OD x 1.2 m)PM-238T-72 Adjustable Tapered Pipe Mount, 21 9.5 Each



2-3/8" OD x 96" (60.3 mm OD x 2.4 m)

Adjustable Pipe Mount Kits, 4-1/2" ODPM-412-48 Adjustable Pipe Mount, 4-1/2" OD x 48" 44 20.0 Each



(60.3 mm OD x 2.4 m)

Adjustable Tapered Pipe Mount Kits, 4-1/2" ODPM-412T-48 Adjustable Tapered Pipe Mount, 44 20.0 Each



4-1/2" OD x 96" (60.3 mm OD x 2.4 m)

PM-238

PM-412

saddle mount sold seperately


18/116


19/116

1 5 ( 3 8 1 m m ) 2 0

( 5 0 8 m

m )

4-1/2OD X 60

(114.3mm)(1.5m)

1 4

( 3 5 5. 6

m m )1 4 - 1 / 2

( 3 6 8 .3 m m )

1 1 - 7 / 6 4 ( 2 8 2 .2 m m )

universal adjustable taperpipe mount

tower applications

Application: Lattice towersSize: 4-1/2" OD x 60" (114.3 mm x 1.5 m)Design: Mount with prepunched adjustment bracesFeature: Up to 20 degree tiltMounts to: Saddle mountsMaterial: Hot dip galvanized steelIncludes: Pipe mountOrder Separately:Saddle mount


*Typical installation of (1) 6 dish per sector with dish stiff arm

Ordering InformationPart Number Description Wt. lb Wt. kg Kit QtyPM-AT412-60 Universal Adjus table Taper Pipe Mount 125 56.7 Each

4-1/2" OD x 60" (114.3 mm OD x 1.5 m)


2 4 o

r 3 6

( 6 1 0

m m o r

9 1 4 m

m )

63(1.6m)

4-1/2 OD(114.3mm)

6

( 1 5 2. 4 m

m )

stand-off pipe mount Application: Lattice towersSize: 4-1/2" (114.3 mm) ODDesign: 4-1/2" OD pipe mount with stand-offFeature: 24" (0.6 m) or 36" (0.9 m) stand-off

Mounts to: Saddle mountsMaterial: Hot dip galvanized steelIncludes: Pipe mountOrder Separately:Saddle mount


Part Number Description Wt. lb Wt. kg Kit QtPM-XT-24 Stand-off Pipe Mount, 107.88 48.93 Each

4-1/2" OD x 63" (114.3 mm OD x 1.6 m).24" (0.6 m) stand-off.

PM-XT-36 Stand-off Pipe Mount, 128.45 58.26 Each4-1/2" OD x 63" (114.3 mm OD x 1.6 m).36" (0.9 m) stand-off.


20/1165

universal saddle mounts

tower applications

Application: Lattice towersSize: Two versions

Design: New SM-U2080 with two piece formed saddleFeature: Universal mounting design for round and angled

legs. SM-U2080 face allows 2-3/8" or 4-1/2"pipes to be bolted directly to unit.

Mounts to: Tower member (see table)Material: Hot dip galvanized steelIncludes: MountOrder Separately:Pipe mount



Part Number Description Wt. lb Wt. kg KitSM-U2080 Universal Saddle Mount, for st raight or tapered 50 22.7 Ki t o

legs up to 8" OD, 8" angle 60, or 6" angle 90SM-UT1012 Universal Angle Saddle Mount, 12" (304.8 mm) 80 36.3 Ki t o

triangular legs and 10" to 12"(254.0 mm to 304.8 mm) angle members.

Pipe Adapter Kit for Universal Saddle MountsSM-UADP Universal Saddle Mount Adapter Kit. 18 8.2 Kit

Order U-Bolts separately.

7-1/2(190mm)

SLOT4-1/2 Long

(114.3mm)

2-3/8 or 4-1/2 OD(60.3mm or 114.3mm)

universal taper pipe mountslider brackets



2-3/8" OD Universal Taper Pipe Mount Slider BracketsPM-SL2 Universal Taper Pipe Mount Slider Bracket 30 13.6 Ki

for 2-3/8" (60.3 mm) OD Pipe.Order pipe separately.

PM-SL2-72 Universal Taper Pipe Mount Slider Bracket, 51 23.1 E2-3/8" OD x 72" (60.3 mm OD x 1.8 m) pipe.


4-1/2" OD Universal Taper Pipe Mount Slider BracketsPM-SL4 Universal Taper Pipe Mount Slider Bracket 31 14.2 Ki

for 4-1/2" (114.3 mm) OD Pipe.Order pipe separately.




*Typical installation of (1) 96 x8 panel antenna per sector

SM-U2080

SM-UADP SM-UT1012

Application: Lattice towersSize: 2-3/8" (60.3 mm) or 4-1/2" (114.3 mm) ODDesign: Pipe with adjustable clampsFeature: Universal sliding bracket with up to 7 of taperMounts to: Saddle mountsMaterial: Hot dip galvanized steelIncludes: Sliding pipe mount bracket, hardware, with or

without pipesOrder Separately:Saddle mount


21/116



7-1/2(190mm)

SLOT 4-1/2 Long(114.3mm)

2-3/8 or 4-1/2 OD(60.3mm or 114.3mm)

stiff arm kits

tower applications

Application: Antenna mountingSize: 10' 6" (3.2 m) or 12' 6" (3.8 m) longDesign: Universal adjustable, rotatable attachmentFeature: Mounts to tower members up to 4-1/2" ODMounts to: Round and angle legsMaterial: Hot dip galvanized steelIncludes: Attachment hardwareOrder Separately:Additional attachment hardware


universal sliding pipemount kits Application: Lattice towersSize: 2-3/8 (60.3mm) or 4-1/2 (114.3mm) ODDesign: Pipe with saddle mount and adjustable clamps

Feature: Universal sliding bracket with up to 7o of taper.Mounts to: Straight or tapered legs up to 8 OD, 8 angle 60o,

or 6 angle 90o

Material: Hot dip galvanized steelIncludes: Universal saddle mount, sliding pipe mount brackets,

with or without pipeOrder Separately:Pipes for base kits



1 0 - 6 ( 3 .1 m )

2-3/8 OD(60.3mm)

2-3/8 OD Universal Sliding Pipe Mount KitsPM-SU2-B Universal Sliding Pipe Mount Base Kit for 2-3/8 80 32.3 Kit o

(60.3mm) OD pipe, Order pipe separately.PM-SU2-72 Universal Sliding Pipe Mount Kit, 2-3/8 OD 101 45.8 Each

X 72 (60.3mm OD X 1.8m) pipe.PM-SU2-96 Universal Sliding Pipe Mount Kit, 2-3/8 OD 114 51.7 Each

X 96 (60.3mm OD X 2.4m) pipe.4-1/2 OD Universal Sliding Pipe Mount KitsPM-SU4-B Universal Sliding Pipe Mount Base Kit, for 4-1/2 81 36.8 Kit o

(114.3mm) OD pipe, Order pipe separately.PM-SU4-63 Universal Sliding Pipe Mount Kit, 4-1/2 OD 138 62.6 Each

X 63 (114.3mm OD X 1.6m) pipe.PM-SU4-96 Universal Sliding Pipe Mount Kit, 4-1/2 OD 169 76.7 Each

X 96 (114.3mm OD X 2.4m) pipe.

SA-B Stiff Arm Mount Bracket for 2-3/8" 13 6.1 Each(60.3 mm) OD Pipe

SA-B10 Stiff Arm Bracket, with Two Threaded 2-3/8" 53 24.1 EachOD X 63 (60.3 mm OD x 1.6 m) pipes

SA-B12 Stiff Arm Bracket, with 2-3/8" OD x 12' 6" 60 27.1 Each(60.3 mm OD x 3.8 m) pipe


*Typical installation of (1) 96 X 8 panel antenna per sector

SA-B

SA-B10

1 2 - 6 ( 3 .8 m )

2-3/8 OD(60.3mm)

SA-B12


22/1167

crossover plates

tower applications

Application: Antenna mountingSize: Ten versionsDesign: U-bolt and half-clamp stylesFeature: Allow pipe intersectionsMounts to: Round member (see table)Material: Hot dip galvanized steelIncludes: Plate and u-bolts or clampsOrder Separately:Pipe


Ordering InformationPart Number Description Wt. lb Wt. kg Kit

U-Bolt StyleXP-2020 Crossover Plate, 2-3/8" OD to 2-3/8" OD 10 4.5 Each

(60.3 mm OD to 60.3 mm OD) round members.XP-2030 Crossover Plate, 2-3/8" OD to 3-1/2" OD 10 4.5 Each





(114.3 mm OD to 114.3 mm OD) round members.

Clamp StyleCO-100 Crossover Plate. Joins two 1-1/2" OD to 16 7.3 Each

3-1/2" OD (38.1 mm OD to 88.9 mm OD)round members.

CO-200 Crossover Plate. Joins two 2" OD to 5" OD 29 13.2 Each(50.8 mm OD to 127 mm OD) round members.

CO-400 Crossover Plate. Joins two 2" to 5" OD 30 13.6 Each(50.8 mm to 127 mm OD) to 4" to 9" OD(101.6 mm to 228.6 mm OD) round members.

CO-78 Crossover Plate, 7/8" OD to 2-3/8" OD 16 7.3 Each(31.8 mm OD to 60.3 mm OD) round members.

double antenna clamp Application: Antenna mountingSize: 16" (406.4 mm) wideDesign: Double pipe-to-pipe clampFeature: Converts pipe to accept two antennas

Mounts to: 1-1/2" to 3-1/2" (38.1 mm to 88.9 mm) ODMaterial: Hot dip galvanized steelIncludes: Clamp assemblyOrder Separately:1-1/2" to 3-1/2" (38.1 mm to 88.9 mm) OD pipe


Part Number Description Wt. lb Wt. kg KitDA-C200 Double Antenna Clamp 23 10.4 Kit of

CO series XP series


23/116

crossover clamps

tower applications

Application: Antenna mountingSize: Four versionsDesign: Welded half-clampFeature: Allows pipe intersectionsMounts to: See tableMaterial: Hot dip galvanized steelIncludes: Half clamps and threaded rodOrder Separately:Pipe


Part Number Description Wt. lb Wt. kg Kit Qty.CC-100 Crossover Clamp. Joins two 1-1/2" to 2-1/2" 6 2.7 Each

OD (38.1 mm to 63.5 mm OD) round members.

CC-100-6 Crossover Clamp. Joins two 2-1/2" to 3-1/2" 6 2.7 EachOD (63.5 mm to 88.9 mm OD) round members.CC-215 Crossover Clamp. Joins one 1-1/2" to 2-1/2" 9 4.1 Each

OD (38.1 mm to 63.5 mm OD) pipe to one 2-3/8 to 5" OD (60.3 mm to127.0 mm OD) pipe.

CC-215-6 Crossover Clamp. Joins one 2-1/2" to 3-1/2" 9 4.1 EachOD (63.5 mm to 88.9 mm OD) pipe to one 2-3/8 to 5" OD (60.3 mm to 127.0 mm OD) pipe.


crossover angle Application: Antenna mountingSize: 3" x 5" angle crossoverDesign: U-bolt and angleFeature: Allows pipe intersections

Mounts to: 2-3/8" OD pipeMaterial: Hot dip galvanized steelIncludes: Angle and u-boltsOrder Separately:Pipe


Part Number Description Wt. lb Wt. kg Kit QtXA-2020 Crossover Angle, 2-3/8" OD to 2-3/8" OD 4 1.8 Kit of 2

(60.3 mm OD to 60.3 mm OD)


24/1169

universal cable ladder kits

tower applications

Application: Lattice towersSize: 10' (3 m) and 20' (6 m) in three widthsDesign: Angle rails with bolt-on channel rungsFeature: Complete ladder kit

Mounts to: Round and angle legsMaterial: Hot dip galvanized steelIncludes: Ladder, splice plates, and attachment kitsOrder Separately:




10' (3 m) Universal Cable Ladder KitsCL-0610-U Universal Cable Ladder Kit, 20" wide x 10' long 57 25.9 Ea

(355.6 mm x 3 m), 6-hole rung.Includes universal hardware kit for roundand angle members.

CL-0910-U Universal Cable Ladder Kit, 30" wide x 59 27.0 Ea10' long (762. mm wide x 3 m), 9-hole rung.Includes universal hardware kit for roundand angle members.

CL-1210-U Universal Cable Ladder Kit, 38" wide x 62 28.0 Ea10' long (1 m wide x 3 m), 12-hole rung.Includes universal hardware kit for roundand angle members.

20' (6 m) Universal Cable Ladder KitsCL-0620-U Universal Cable Ladder Kit, 20" wide x 20' long 112 50.8 Eac

(355.6 mm x 6 m), 6-hole rung.Includes universal hardware kit for roundand angle members.

CL-0920-U Universal Cable Ladder Kit, 30" wide x 117 52.9 Ea20' long (762. mm wide x 6 m), 9-hole rung.Includes universal hardware kit for roundand angle members.

CL-1220-U Universal Cable Ladder Kit, 38" wide x 121 55.1 Ea20' long (1 m wide x 6 m), 12-hole rung.Includes universal hardware kit for roundand angle members.

angled member attachment

round member attachment


25/116


26/1161

star support brackets

tower applications

Application: Lattice towersSize: 3/4" (19.1 mm) and 7/16" (11.1 mm) holesDesign: Bolt together stand-off mountFeature: Expandable mounting solution

Mounts to: Round and angle legs (see table)Material: Hot dip galvanized steelIncludes: BracketOrder Separately:




Tee Bracket KitsSS-TB2550 Star Support Tee Bracket for 1-1/2" to 5-9/16" 8 3.6 Eac

OD (38.1 mm to 141.3 mm OD) round membersand 2-1/2" to 5" (50.8 mm to 127 mm)angle members.

SS-TB6080 Star Support Tee Bracket for 4" to 10-3/4" 10 4.5 EacOD (101.6 mm to 273.1 mm OD) round membersand 4" to 8" (101.6 mm to 203.2 mm)angle members.

Face Bracket KitsSS-1FB2550 Star Support Single Face Bracket for 1-1/2" 8 3.6 Eac

to 5-9/16" OD (38.1 mm to 141.3 mm OD)round members and 2-1/2" to 5"(63.5 mm to 127 mm) angle members.

SS-1FB6080 Star Support Single Face Bracket for 4" to 10 4.5 Ea10-3/4" OD (101.6 mm to 273.1 mm OD)round members and 4" to 8"(101.6 mm to 203.2 mm) angle members.

SS-2FB2550 Star Support Dual Face Bracket for 1-1/2" to 11 5.0 Eac5-9/16" OD (38.1 mm to 141.3 mm OD) roundmembers and 2-1/2" to 5"(50.8 mm to 127 mm) angle members.

SS-2FB6080 Star Support Dual Face Bracket for 4" to 13 5.9 Ea10-3/4" OD (101.6 mm to 273.1 mm OD)round members and 4" to 8"(101.6 mm to 203.2 mm) angle members.

Additional Adapters for Tee and Face Bracket KitsSS-TB Star Support Tee Bracket. Used to expand the 3 1.4 Ea

capacity of the Star Support Tee or Face Brackets.SS-FB Star Support Face Bracket. Used to expand the 3 1.4 Ea

capacity of the Star Support Tee or SingleFace Brackets.

SS-2FBseries

SS-1FBseries

SS-TBseries


27/116

cluster support brackets

tower applications

Application: Lattice towerSize: 3/4" (19.1 mm) and 7/16" (11.1 mm) holesDesign: Small and large versionsFeature: Oval design maximizes capacity

Mounts to: Available with or without mounting hardwareMaterial: Hot dip galvanized steelIncludes: BracketOrder Separately:U-bolts or wall anchors



Cluster Support BracketsCS-B Cluster Support Bracket 3 1.4 EachCS-B-R2 Cluster Support Bracket with 2" to 5" 7 3.2 Each

(50.8 mm to 127.0 mm) ODround member attachment.

CS-B-R6 Cluster Support Bracket with 6" to 8" 8 3.6 Each(152.4 mm to 203.2 mm) ODround member attachment.

CS-B-2 Cluster Support Bracket with U-bolt for 2-3/8" 4 1.8 Each(60.3 mm) OD round member attachment.

CS-B-A Cluster Support Bracket with 4 1.8 Eachangle member attachment.

Large Cluster Support BracketsCS-BL Cluster Support Bracket, Large Version 4 1.8 EachCS-BL-R2 Cluster Support Bracket, Large Version with 8 3.6 Ea

2" to 5" (50.8 mm to 127.0 mm) ODround member attachment.

CS-BL-R6 Cluster Support Bracket, Large Version with 9 4.1 Ea6" to 8" (152.4 mm to 203.2 mm) ODround member attachment.

CS-BL-2 Cluster Support Bracket, Large Version with 5 2.3 EacU-bolt for 2-3/8" (60.3 mm) ODround member attachment.

CS-BL-A Cluster Support Bracket, Large Version with 5 2.3 Eaangle member attachment.

1 1

( 2 8 0 m

m )

.438 D

.750 D

1 3 o

r 1 8

( 3 3 0 m

m

4 5 7 m

m )

o r

waveguide stand-off brackets Application: Lattice towerSize: Three lengthsDesign: Welded T style bracketFeature: 3/4 (19.1 mm) and 7/16 (11.1 mm) holesMounts to: Tower legs up to 4-1/2" OD, leg gussets or

wall applicationsMaterial: Hot dip galvanized steelIncludes: BracketOrder Separately:U-bolts, mounting bolts, or wall anchors


Part Number Description Wt. lb Wt. kg Kit QtTL-SO6 Waveguide Stand-off Bracket for 4 1.9 Each

6 runs of coaxial cableTL-SO9 Waveguide Stand-off Bracket for 4 2.0 Each

9 runs of coaxial cableTL-SO12 Waveguide Stand-off Bracket for 5 2.1 Each

12 runs of coaxial cable

14-1/4(362mm)

10-5/8(269.9mm)

8-1/2(216mm)

4 ( 1 0 1 m m )


CS-BL-2

CS-BL-R2

CS-BL CS-B

CS-BA


28/1163

monopole applications


monopole co-location t-frame kits (p. 24-25)

upper support rail kit (p. 33)

universal round member sup-port bracket (p. 38)

low profile co-location platform kits (p. 25-26)

universal ring mount (p. 29)

low profile chain mount kits (p. 34)

waveguide bridge kit (p. 68)entry ports (p. 85)

grounding rod (p. 83)

ground buss bar kits (p. 79-81)

coax support (p. 37-38)

grounding (p. 79-84)


29/116

monopole co-locationt-frame kits


Application: MonopolesSize: 12' 6" (3.8 m) and 14' 6" (4.4 m) faceDesign: 3-sectorFeature: Complete co-location kitMounts to: 10" to 60" (254 mm to 1542 mm) OD mono-

poleMaterial: Hot dip galvanized steelIncludes: Ring mount, support arm, and pipe frame with

or without pipe mountsOrder Separately:Pipe mounts and work platforms

Face Width EPA (no ice, sq ft): EPA (1/2 radial ice, sq ft):12 6 Face 11.4 14.514 6 Face 12.8 16.3Man Rating:250 lb vertical man load at 15 mph (BWS)

Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA 222140 mph 3-second gust, Exposure D per FBC, at 150 AGL

*Typical installation of (4) 72 x 8 panel antennas per sector



12' 6" (3.8 m) T-frame Kits, 10" to 30" (254 mm to 762 mm) ODMC-K12S-B Monopole Co-location T- frame Ki t, 760.0 344.7 Each

10" - 30" OD, 36" stand-off, 12 6" face.Pipe mounts not included.

MC-K12S-6-72 Monopole Co-location T-frame Kit, 957.0 434.1 Each10" - 30" OD, 36" stand-off, 12' 6" face,with (6) 2-3/8" OD x 72" pipe mounts.



MC-K12S-9-96 Monopole Co-location T-frame Kit, 1127.1 511.3 Each10" - 30" OD, 36" sand-off, 12' 6" face,with (9) 2-3/8" OD x 96" pipe mounts.



12' 6" (3.8 m) T-frame Kits, 30" to 60" (762 mm to 1524 mm) ODMC-K12L-B Monopole Co-location T-frame Kit, 880.0 399.2 Each

30" - 60" OD, 36" stand-off, 12' 6" face.Pipe mounts not included.

MC-K12L-6-72 Monopole Co-location T-frame Kit, 1076.7 488.4 Each30" - 60" OD, 36" stand-off, 12' 6" face,with (6) 2-3/8" OD x 72" pipe mounts.






14' 6" (4.4 m) T-frame Kits, 16" to 30" (330.2 mm to 762 mm) ODMC-K14S-B Monopole Co-location T- frame Ki t, 831.9 377.3 Each

16" - 30" OD, 36" stand-off, 14' 6" face.Pipe mounts not included.








T-frames continued on next page

*14' 6" T-frames interfere on pole diameters less than 16 OD.


30/116

low-profile co-locationplatform kits Application: MonopolesSize: 12' 6" (3.8 m) or 14' 6" (4.4 m) faceDesign: Corner-grated platformFeature: Complete kitMounts to: 10" to 60" OD (254 mm to 1524 mm)Material: Hot dip galvanized steel

Includes: Platform and ring mount. Available with orwithout pipe mounts.Order Separately:Pipe mount kits or upper support rail kit



12' 6" (3.8 m) Co-Location Platform Kits, 10" to 30" (254 mm to 762 mm) ODMC-PK12S-B Low-Profi le Co-location Platform Kit, 1123.2 509.5

12' 6" (3.8 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference,pipe mounts not included.

MC-PK12S-9-72 Low-Profile Co-location Platform Kit, 1418.6 643.512' 6" (3.8 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Nine 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.



MC-PK12S-12-72 Low-Profile Co-location Platform Kit, 1517.1 688.212' 6" (3.8 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Twelve 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.



5

monopole co-locationt-frame kitscontinued


m




14' 6" (4.4 m) T-frame Kits, 30" to 60" (762 mm to 1524 mm) ODMC-K14L-B Monopole Co-location T-frame Kit, 951.7 431.7 E

30" - 60" OD, 36" stand-off, 14' 6" face,pipe mounts not included.

MC-K14L-6-72 Monopole Co-location T-frame Kit , 1148.7 521.1 E30" - 60" OD, 36" stand-off, 14' 6" face,with (6) 2-3/8" OD x 72" pipe mounts.




MC-K14L-12-72 Monopole Co-location T-frame Kit, 1345.7 610.4 E30" - 60" OD, 36" stand-off, 14' 6" face,with (12) 2-3/8" OD x 72" pipe mounts.

MC-K14L-12-96 Monopole Co-location T-frame Kit, 1441.3 653.8 E30" - 60" OD, 36" stand-off, 14' 6" face,with (12) 2-3/8" OD x 96" pipe mounts.


31/116


Face Width EPA (no ice, sq ft): EPA (1/2 radial ice, sq ft):12 6 Face 8.75 11.314 6 Face 10.2 13.1

Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA 222140 mph 3-second gust, Exposure D per FBC, at 150 AGL



low-profile co-locationplatform kitscontinued


Part Number Description Wt. lb Wt. kg Kit Q

14' 6" (4.4 m) Co-location Platform Kits, 10" to 30" (254 mm to 762 mm) ODMC-PK14S-B Low-Profi le Co-location Platform Kit, 14' 6" 1223.4 554.9 Ea

(4.4 m) face. 10" to 30" OD (254 mm to762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference,pipe mounts not included.

MC-PK14S-9-72 Low-Profile Co-location Platform Kit, 14' 6" 1518.9 689.0 Eac(4.4 m) face. 10" to 30" OD (254 mm to762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Nine 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.



MC-PK14S-12-72 Low-Profile Co-location Platform Kit, 14' 6" 1617.4 733.7 Eac(4.4 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Twelve 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.

MC-PK14S-12-96 Low-Profile Co-location Platform Kit, 14' 6" 1713.0 777.0 Eac(4.4 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Twelve 2-3/8" ODx 96" (60.3 mm x 2.4 m) pipe mounts included.

MC-PK14S-12-126 Low-Profile Co-location Platform Kit, 1809.0 820.6 Eac14' 6" (4.4 m) face. 10" to 30" OD (254 mmto 762 mm), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Twelve 2-3/8" ODx 126" (60.3 mm x 3.2 m) pipe mounts included.

14' 6" (4.4 m) Co-location Platform Kits, 30" to 60" (762 mm to 1524 mm) ODMC-PK14L-B Low-Profi le Co-location Platform Kit, 14' 6" 1510.0 684.9 Ea

(4.4 m) face. 30" to 60" OD (762 mm to1524 mm), 94.2" to 188.4" (2392.7 mm to4785.4 mm) circumference,pipe mounts not included.

MC-PK14L-9-72 Low-Profile Co-location Platform Kit, 14' 6" 1805.5 819.0 Ea(4.4 m) face. 30" to 60" OD (762 mm to1524 mm), 94.2" to 188.4" (2392.7 mm to4785.4 mm) circumference. Nine 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.

MC-PK14L-9-96 Low-Profile Co-location Platform Kit, 14' 6" 1877.2 851.5 Ea(4.4 m) face. 30" to 60" OD (762 mm to1524 mm), 94.2" to 188.4" (2392.7 mm to4785.4 mm) circumference. Nine 2-3/8" ODx 96" (60.3 mm x 2.4 m) pipe mounts included.

MC-PK14L-9-126 Low-Profile Co-location Platform Kit, 14' 6" 1949.2 884.2 Eac(4.4 m) face. 30" to 60" OD (762 mm to1524 mm), 94.2" to 188.4" (2392.7 mm to4785.4 mm) circumference. Nine 2-3/8" OD x126" (60.3 mm x 3.2 m) pipe mounts included.

MC-PK14L-12-72 Low-Profile Co-location Platform Kit, 14' 6" 1904.0 863.7 Eac(4.4 m) face. 30" to 60" OD (762 mm to1524 mm), 94.2" to 188.4" (2392.7 mm to4785.4 mm) circumference. Twelve 2-3/8" ODx 72" (60.3 mm x 1.8 m) pipe mounts included.




32/116

low-profile adjustableco-location platform kit Application: MonopolesSize: 12' 6" (3.8 m) or 14' 6" (4.4 m) faceDesign: Rotatable, corner-grated platformFeature: Complete kitMounts to: 10" to 60" OD (254 mm to 1524 mm)Material: Hot dip galvanized steelIncludes: Platform and ring mount. Available with or without

pipe mounts.Order Separately:Pipe mount kits or upper support rail



12' 6" (3.8 m) Adjustable Platform Kits, 10" to 30" (254 mm to 762 mm) ODMC-PA12S-B Low-Profile Adjustable Co-location Platform Kit, 1113.8 505.2

12' (3.7 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference, pipe mounts

not included.MC-PA12S-9-72 Low-Profile Adjustable Co-location Platform Kit, 1409.2 639.212' (3.7 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Three 2-3/8" OD x72" (60.3 mm OD x 1.8 m) pipe mounts included.

MC-PA12S-9-96 Low-Profile Adjustable Co-location Platform Kit, 1481.0 671.812' (3.7 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Three 2-3/8" OD x96" (60.3 mm OD x 2.4 m) pipe mounts included.

MC-PA12S-9-126 Low-Profile Adjustable Co-location Platform Kit, 1553.0 704.412' (3.7 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Three 2-3/8" OD x126" (60.3 mm OD x 3.2 m) pipe mounts included.

MC-PA12S-12-72 Low-Profile Adjustable Co-location Platform Kit, 1507.7 683.912' (3.7 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Four 2-3/8" OD x72" (60.3 mm OD x 1.8 m) pipe mounts included.



12' 6" (3.8 m) Adjustable Platform Kits, 30" to 60" (762 mm to 1524 mm) ODMC-PA12L-B Low-Profile Adjustable Co-location Platform Kit, 1233.6 559.6

12' (3.7 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference,pipe mounts not included.

MC-PA12L-9-72 Low-Profile Adjustable Co-location Platform Kit, 1529.1 693.612' (3.7 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Three 2-3/8" ODx 72"(60.3 mm OD x 1.8 m) pipe mounts included.

MC-PA12L-9-96 Low-Profile Adjustable Co-location Platform Kit, 1600.8 726.112' (3.7 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Three 2-3/8" ODx 96" (60.3 mm OD x 2.4 m)pipe mounts included.

MC-PA12L-9-126 Low-Profile Adjustable Co-location Platform Kit, 1672.8 758.812' (3.7 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Three 2-3/8" ODx 126" (60.3 mm OD x 3.2 m)pipe mounts included.

MC-PA12L-12-72 Low-Profile Adjustable Co-location Platform Kit, 1627.6 738.312' (3.7 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Four 2-3/8" OD x72" (60.3 mm OD x 1.8 m) pipe mounts included.



1 2 - 6 o r 1 4 - 6

( 3. 8 m o r 4. 4 m )

3-1/2 OD(89mm)

7



Face Width EPA (no ice, sq ft): EPA (1/2 radial ice, sq ft):12 6 Face 15.6 19.414 6 Face 17.6 21.8Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA 222140 mph 3-second gust, Exposure D per FBC, at 150 AGL



33/116



low-profile adjustableco-location platform kitcontinued



14' 6" (4.4 m) Adjustable Platform Kits, 10" to 30" (254 mm to 762 mm) ODMC-PA14S-B Low-Profile Adjustable Co-location Platform Kit, 1644.8 746.1 Ea

14' (4.3 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference,pipe mounts not included.

MC-PA14S-9-72 Low-Profile Adjustable Co-location Platform Kit, 1940.3 880.1 Ea14' (4.3 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Nine 2-3/8" OD x72" (60.3 mm OD x 1.8 m)pipe mounts included.

MC-PA14S-9-96 Low-Profile Adjustable Co-location Platform Kit, 2012.0 912.6 Ea14' (4.3 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Nine 2-3/8" OD x96" (60.3 mm OD x 2.4 m)pipe mounts included.

MC-PA14S-9-126 Low-Profile Adjustable Co-location Platform Kit, 2084.0 945.3 Eac14' (4.3 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Nine 2-3/8" OD x126" (60.3 mm OD x 3.2 m)pipe mounts included.

MC-PA14S-12-72 Low-Profile Adjustable Co-location Platform Kit, 2038.8 924.8 Eac14' (4.3 m) face. 10" to 30" OD (254 mm to762 mm OD), 31.4" to 94.2" (797.6 mm to2392.7 mm) circumference. Twelve 2-3/8" ODx 72" (60.3 mm OD x 1.8 m)pipe mounts included.



14' 6" (4.4 m) Adjustable Platform Kits, 30" to 60" (762 mm to 1524 mm) ODMC-PA14L-B Low-Profile Adjustable Co-location Platform Kit, 1764.6 800.4 E

14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference,pipe mounts not included.

MC-PA14L-9-72 Low-Profile Adjustable Co-location Platform Kit, 2060.1 934.5 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Nine 2-3/8" ODx 72" (60.3 mm OD x 1.8 m)pipe mounts included.

MC-PA14L-9-96 Low-Profile Adjustable Co-location Platform Kit, 2131.8 967.0 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Nine 2-3/8"OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

MC-PA14L-9-126 Low-Profile Adjustable Co-location Platform Kit, 2203.8 999.6 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Nine 2-3/8"OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

MC-PA14L-12-72 Low-Profile Adjustable Co-location Platform Kit, 2158.6 979.1 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Twelve 2-3/8"OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.

MC-PA14L-12-96 Low-Profile Adjustable Co-location Platform Kit, 2254.2 1022.5 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Twelve 2-3/8"OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

MC-PA14L-12-126 Low-Profile Adjustable Co-location Platform Kit, 2350.2 1066.1 Ea14' (4.3 m) face. 30" to 60" OD (762 mm to1524 mm OD), 94.2" to 188.4" (2392.7 mmto 4785.4 mm) circumference. Twelve 2-3/8"OD x 126" (60.3 mm OD x 3.2 m)

pipe mounts included.


34/116

universal ring mounts App.: MonopolesSize: Three sizesDesign: 3 or 4-sector clamp-on mountFeature: Fits broad range of pole sizes

Mounts to: 10" (254.0 mm) to 60" (1524.0 mm) ODMaterial: Hot dip galvanized steelIncl.: Mount and threaded rodOrder Sep.: Arms, platforms, pipes

Wind Rating*:140 mph (BWS) per latest revision of TIA/EIA 222160 mph 3-second gust, Exposure D per FBC, at 150 AGL

*Typical installation of (4) 72 x 8 panel antennas per sector on a 14' 6" face



3-Sector Universal Ring MountsMC-RM1030-3 Universal Ring Mount, 10" to 30" OD 190.3 86.3 Eac

(254 mm to 762 mm OD), 31.4" to 94.2"(797.6 mm to 2392.7 mm) circumference.

MC-RM1550-3 Universal Ring Mount, 15" to 50" OD 259.6 117.7 Eac(381.0 mm to 1270.0 mm OD), 47.1" to 157.1"(1196.3 mm to 3990.3 mm) circumference

MC-RM3060-3 Universal Ring Mount, 30" to 60" OD 310.1 140.7 Eac(762 mm to 1524 mm OD), 94.2" to 188.4"(2392.7 mm to 4785.4 mm) circumference.

4-Sector Universal Ring MountsMC-RM1030-4 Universal Ring Mount, 10" to 30" OD 204.3 92.7 Eac

(254 mm to 762 mm OD), 31.4" to 94.2"(797.6 mm to 2392.7 mm) circumference.

MC-RM3060-4 Universal Ring Mount, 30" to 60" OD 355.9 161.4 Eac(762 mm to 1524 mm OD), 94.2" to 188.4"(2392.7 mm to 4785.4 mm) circumference.

9



MC-RM1030-3

MC-RM3060-4


35/116



support arms for ring mounts Application: MonopolesSize: Seven stand-off optionsDesign: Multiple designs optionsFeature: Visually appealing low profile design

Mounts to: Ring mountsMaterial: Hot dip galvanized steelIncludes: HardwareOrder Separately:Ring mount, antenna pipes, and cellular pipe frame

4 0 ( 1 .0 m )

10 Square(254mm)

6 3 ( 1 .5 8 m )

10 Square(254mm)

4 X 4 X 1/4(101.6mm X 101.6mm X 6.4mm)


Part Number Description Wt. lb Wt. kg Kit QtMT-197 Single Support Arm, 36" (0.9 m) long, with 68.1 30.9 Each

4-1/2" OD x 18" (114.3 mm OD x 0.5 m) pipe.MT-197-48 Single Support Arm, 48" (1.2 m) long, with 82.1 37.2 Each

4-1/2" OD x 18" (114.3 mm OD x 0.5 m) pipe.MT-197-C Single Pipe Curved Support Arm, 63" (1.6 m) 92.1 41.8 Each

long, with 4-1/2" OD x 18" (114.3 mm OD x0.5 m) pipe.

MT-198 Double Pipe Support Arm, 63" (1.6 m) long. 102.9 46.7 EachOrder 2-3/8" (60.3 mm) OD pipes separately.Includes U-bolts.

MT-198-C Double Pipe Curved Support Arm, 63" (1.6 m) 123.0 55.8 Eachlong. Order 2-3/8" (60.3 mm) OD pipesseparately. Includes U-bolts.

MC-DA14-B Double Pipe Support Arm, 14" (355.6 mm). 83.5 37.9 EachOrder 2-3/8" (60.3 mm) OD pipes separately.Includes U-bolts.

MC-SA40-B Stand-off Arm, 40" (1 m). Order 2-3/8" 73.0 33.1 Each(60.3 mm) OD pipes separately. Includes U-bolts.

Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA 222140 mph 3-second gust, Exposure D per FBC, at 150 AGL


MC-DA14-B

MC-SA40-B

MT-198MT-198-C

MT-197

MT-197-C

39 .5 ( 1.0 m)

10 Square(254mm)

10(254mm)

39 .5 ( 1.0 m)

10 Square(254mm)

4-1/2 OD(114.3mm)

3 6 o r 4 8 ( 0 .9 m o r 1 .2 m )

10 Square(254.0mm)


36/1161



work platform forsupport arms Application: MonopolesSize: 12" (304.8 mm) wide gratingDesign: Safety-grated work platformFeature: Clamps on to monopole armsMounts to: MT-197 or MT-198 armMaterial: Hot dip galvanized steelIncludes: Platform and clampsOrder Separately:MT-197 or MT-198 arms


Part Number Description Wt. lb Wt. kg KitWP-197 Work Platform for Single Pipe Support Arm 81.8 37.1 Ea

(MT-197)WP-198 Work Platform for Double Pipe Support Arm 92.1 41.8 Ea

(MT-198)

WP-197 WP-198

MT-197 MT-197-C

MC-DA14-B


37/116


38/116

Face Width EPA (no ice, sq ft): EPA (1/2 radial ice, sq ft):12 6 Face 8.75 11.314 6 Face 10.2 13.1Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA 222140 mph 3-second gust, Exposure D per FBC, at 150 AGL


low profile co-locationplatforms Application: MonopolesSize: 12' 6" (3.8 m) or 14' 6" (4.4 m) faceDesign: Corner-grated platformFeature: Simplified installationMounts to: Ring mountMaterial: Hot dip galvanized steelIncludes: Platform onlyOrder Separately:Ring mount, pipe mount kits, and handrail


Part Number Description Wt. lb Wt. kg KitMT-196 Low Profile Co-location Platform, 1123.2 509.5 Ea

12' 6" (3.8 m) face. Order 10" to 30" ODring mount and pipe mount kits separately.

MT-196-14 Low Profi le Co-location Pla tform, 1234.3 559.9 Ea14' 6" (4.4 m) face. Order 10" to 30" ODring mount and pipe mount kits separately.

MT-196-14L Low Profi le Co-location Pla tform, 1280.8 581.0 Ea14' 6" (4.4 m) face. Order 30" to 60" ringmount and pipe mount kits separately.

3



upper support rail kits forco-location platforms Application: MonopolesSize: 12' 6" (3.8 m) or 14' 6" (4.4 m)Design: Clamp-on upper support railFeature: Allows two pipe mounting pointsMounts to: MT-196, MC-PK or MC-PA seriesMaterial: Hot dip galvanized steelIncludes: Rail, twelve crossover angles, and hardware

Order Separately:Platform and pipe mount kits


Part Number Description Wt. lb Wt. kg KitMT-195-12 Upper Support Rail Kit for Co-location Platforms, 244.6 111.0 E

12' 6" face.MT-195-14 Upper Support Rail Kit for Co-location Platforms, 316.6 143.6 E

14' 6" face.

ring mount sold separa


39/116



low profile chain mounts Application: MonopolesSize: 2-3/8" (60.3 mm) OD pipe mountsDesign: 1-, 2-, 3- or 6- antenna chain mountsFeature: Universal, low profile mount

Mounts to: 8" to 60" (203.2 mm to 1524 mm) ODMaterial: Hot dip galvanized steelIncludes: See tableOrder Separately:


Part Number Description Wt. lb Wt. kg Kit Q

Single, Double, and Triple Chain Mount Kits, 8" to 30" (203.2 mm to 711.2 mm) OD25" to 94.2" (635 mm to 2393 mm) circumferenceCM-30S-B Single Chain Mount Base Kit, 8' chain, 26.76 12.1 Each

2-3/8" OD pipe sold separately.CM-30S-72 Single Chain Mount Kit, One 2-3/8" OD x 47.76 21.7 Each

72" pipe, 8' chainCM-30S-96 Single Chain Mount Kit, One 2-3/8" OD x 60.26 27.3 Each

96" pipe, 8' chainCM-30D-B Double Chain Mount Base Kit, 8' chain, 38.76 17.6 Each

2-3/8" OD pipe sold separately.CM-30D-72 Double Chain Mount Kit, Two 2-3/8" OD x 80.76 36.6 Each

72" pipes, 8' chainCM-30D-96 Double Chain Mount Ki t, Two 2-3/8" OD x 105.76 48.0 Each

96" pipes, 8' chainCM-30T-B Triple Chain Mount Base Kit, 8' chain, 50.76 23.0 Each

2-3/8" OD pipe sold separately.CM-30T-72 Triple Chain Mount Kit, Three 2-3/8" OD x 113.76 51.6 Each

72" pipes, 8' chainCM-30T-96 Triple Chain Mount Kit, Three 2-3/8" OD x 151.26 68.6 Each

96" pipes, 8' chain

Single, Double, and Triple Chain Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD25" to 188" (635 mm to 4785 mm) circumferenceCM-60S-B Single Chain Mount Base Kit, 2-3/8" OD pipe, 38.78 17.6 Each

16' chainCM-60S-72 Single Chain Mount Kit, One 2-3/8" OD x 59.76 27.1 Each

72" pipe, 16' chainCM-60S-96 Single Chain Mount Kit, One 2-3/8" OD x 72.26 32.8 Each

96" pipe, 16' chainCM-60D-B Double Chain Mount Base Kit, 16' chain, 50.76 23.0 Each

2-3/8" OD pipe sold separately.CM-60D-72 Double Chain Mount Kit, Two 2-3/8" OD x 92.76 42.1 Each

72" pipes, 16' chainCM-60D-96 Double Chain Mount Ki t, Two 2-3/8" OD x 117.76 53.4 Each

96" pipes, 16' chainCM-60T-B Triple Chain Mount Base Kit, 16' chain, 62.76 28.5 Each

2-3/8" OD pipe sold separately.

CM-60T-72 Triple Chain Mount Kit, Three 2-3/8" OD x 123.76 56.1 Each72" pipes, 16' chainCM-60T-96 Triple Chain Mount Kit, Three 2-3/8" OD x 163.26 74.1 Each

96" pipes, 16' chain

Six Antenna Chain Mount Kits, 14 to 60 (356mm to 1524mm) OD, 44 to 188(1117mm to 4785mm) circumferenceCM-606-B Six Antenna Mount Kit, 16 chain, 2-3/8 OD 98.7 44.7 Each

pipe sold separatelyCM-606-72 Six Antenna Mount Kit, Three 2-3/8 OD X 231 104.8 Each

72 pipes, 16 chainCM-606-96 Six Antenna Mount Kit, Three 2-3/8 OD X 275 124.7 Each

96" pipes, 16' chain

Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) 1/2 radial ice at100 AGL per latest revision ofTIA/EIA - 222

*Typical installation of (1) 96 x 10 panel antenna per sector

single chain mount

triple chain mount

double chain mount

six antenna chain mount


40/116

light duty chain mounts Application: MonopolesSize: 4-1/2" (114.3 mm) OD pipe mountsDesign: Single antenna mountFeature: Versatile solution

Mounts to: 8" (203.2 mm) to 60" (1.5 m) OD two versionsMaterial: Hot dip galvanized steelIncludes: Pipe mounts and chainsOrder Separately:Stiff arm and pipe mounts as needed

Man Rating:250 lb vertical man load at 15 mph (BWS) Wind Rating*:120 mph (BWS) 1/2 radial ice at 100 AGL per latest revision ofTIA/EIA - 222

*Typical installation of (1) 2 Standard with Radome Microwave Antenna



Light Duty Chain Mount Kits, 8" to 30" (203.2 mm to 711.2 mm) OD,25" to 94.2" (635 mm to 2393 mm) circumferenceCM-L30-B Light Duty Chain Mount Base Kit, 8' chain, 26.14 11.9 E

pipe mount sold separately.CM-L30-63 Light Duty Chain Mount Kit, 4-1/2" OD x 63" 90.64 41.1 Ea

pipe mount, 8' chain

Light Duty Chain Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,25" to 188" (635 mm to 4785 mm) circumferenceCM-L60-B Light Duty Chain Mount Base Kit, 16' chain, 38.14 17.3 E

pipe mount sold separately.CM-L60-63 Light Duty Chain Mount Kit, 4-1/2" OD x 63" 102.64 46.6 Ea

pipe mount, 16' chain

5




41/116


42/1167



4 6 ( 1. 1 6

m ) 4 6 ( 1. 1 6

m )

monopole stiff arm mounts Application: MonopolesSize: 48" (1.2 m) armDesign: Chain mounted support armFeature: Adapts stiff arm to monopole

Mounts to: 8" (203.2 mm) to 60" (1.5 m) OD two versionsMaterial: Hot dip galvanized steelIncludes: Arm and chainsOrder Separately:Antenna chain mount and stiff arm



Monopole Stiff Arm Mount Kits, 8" to 30" (203.2 mm to 711.2 mm) OD,25" to 94.2" (635 mm to 2393 mm) circumferenceCM-SL30 Light Duty Stiff Arm Mount, Single 8' 37.0 16.8 E

(2.4 m) chain.CM-SH30 Heavy Duty Stiff Arm Mount, Double 8' 50.0 22.7 Ea

(2.4 m) chains.

Monopole Stiff Arm Mount Kits, 8" to 60" (203.2 mm to 1524 mm) OD,25" to 188" (635 mm to 4785 mm) circumferenceCM-SL60 Light Duty Stiff Arm Mount, Single 16' 43.0 19.5 E

(4.9 m) chain.CM-SH60 Heavy Duty Stiff Arm Mount, Double 16' 62.0 28.1 Ea

(4.9 m) chains.

ex-pressTM coaxmounting band

Application: MonopolesSize: 3/4 (19.1mm) and 7/16 (11.1mm) holesDesign: Coax support for the outside or inside of round

structuresFeature: Universal expansion / compression band with

quick clamp locking features *Patent PendingMounts to: 10 to 60 (254mm to 1524mm) OD round or

polygon monopoleMaterial: Aluminum and Hot dip galvanized steelIncludes: Bracket and hardwareOrder Separately:Snap-in hangers, butterfly hangers, coax blocks



EX-P1060 Expansion / Compression Coax Mounting Band 6.2 2.8 Eafor 10 to 60 (254mm to 1524mm) OD Roundor Polygon Monopoles or 36 to 60 (914.4mmto 1524mm) ID Access tubes

EX-PH3 3 Hole Coax Mounting Bracket for Expanding 2.8 1.2 KitLine Capacity on Ex-PressTM Band

3 ( 7 6 .2 m m )

2(50.8mm)

1.25(31.75mm)


43/116



wrap lock banding kits Application: MonopolesSize: 1/2" x 100' (12.7 mm x 30.5 m)Design: Light duty band and buckle clamping systemFeature: Cost-effective kit for large OD membersMounts to: Round membersMaterial: Stainless steel and galvanized versionsIncludes: Banding, 50 buckles, and installation toolOrder Separately:


Part Number Description Wt. lb Wt. kg Kit QWL-BG Wrap Lock Banding Kit, galvanized 4.0 1.8 EachWL-BS Wrap Lock Banding Kit, stainless steel 4.0 1.8 Each

universal round membersupport bracket Application: MonopolesSize: 3/4" (19.1 mm) and 7/16" (11.1 mm) holes

two versions

Design: Coaxial cable support for round membersFeature: Ideal for co-locationMounts to: Round membersMaterial: Hot dip galvanized steelIncludes: BracketOrder Separately:Banding


Part Number Description Wt. lb Wt. kg Kit QtyRM-USBG Universal Round Member Support Bracket 9.0 4.1 Kit of

for 6 runs.RM-USBG-3 Universal Round Member Support Bracket 5.0 2.3 Kit of

for 3 runs.

banding hardware Application: MonopolesSize: 1/2" x 100' (12.7 mm x 30.5 m)Design: Heavy duty band and buckle clamping systemFeature: Complete banding solutionMounts to: Round membersMaterial: Stainless steel and galvanized versionsIncludes: See tableOrder Separately:


Part Number Description Wt. lb Wt. kg Kit QtyMT-647 Banding Hardware Kit 50.3 22.8 EachMT-640 1/2" (12.7 mm) Stainless Steel Banding, 5.3 2.4 Each

100' (30.5 m) rollMT-641 1/2" (12.7 mm) Stainless Buckle Clamps 1.9 0.9 Kit of 100MT-642 1/2" (12.7 mm) Galvanized Banding, 5.4 2.4 Each

100' (30.5 m) rollMT-643 1/2" (12.7 mm) Galvanized Buckle Clamps 1.9 0.9 Kit of 100MT-644 C-2 Banding Tool 1.7 0.8 EachMT-645 12 oz (0.3 kg) Hammer 1.7 0.8 EachMT-646 Metal Snips 0.8 0.4 Each

RM-USBG-3

RM-USBG

The MT-647 Banding Kit Includes:3 ea 100' (33.5 m) rolls of 1/2" (127 mm) galvanized banding3 ea 100' (33.5 m) rolls of 1/2" (127 mm) stainless steel banding1 box 100 galvanized buckle clamps1 box 100 stainless steel buckle clamps1 ea C-2 banding tool1 ea 12 oz (0.3 kg) hammer1 ea metal snips1 ea toolbox


44/1169

roof-top applications


ground buss bar kits (p. 79-81)

roof-top coax bridge kits (p. 49)

rubber mats (p. 52)

wall coax support kits (p. 53)

ladder tray (p. 55-58)

wall mounts (p. 46-48)

grounding (p. 79-84)

non-penetrating roof frame (p. 40-41)

pvc roof sleeper (p. 51)

tripod mount (p. 44)

ballast frame (p. 44)

roof-top hood entry (87-88)


45/116

non-penetrating roof frames


Application: Roof-topSize: 7' (2.1 m) to 14' 6" (4.4 m) faceDesign: Single sector roof mountFeature: Complete kit

Mounts to: Material: Hot dip galvanized steelIncludes: Rubber mats, available with or without pipe mountsOrder Separately:Pipes for B kits

Wind Rating*:85 mph (BWS) per latest revision of TIA/EIA 222

Exposure "C" per UBC, at 100' AGL

*Typical installation of (4) 120" x 8" panel antennas per sector See Engineering Data Table for ballast



Non-Penetrating Roof Frame, 7' (2.1 m) wideRF-N7-B Non-Penetrating Roof Frame, 7' (2.1 m). 341.3 154.8 Each

2-3/8" (60.3 mm) OD pipe not included.RF-N7-2-72 Non-Penetrating Roof Frame, 7' (2.1 m). 384.5 174.4 Each

Two 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.

RF-N7-2-96 Non-Penetrating Roof Frame, 7' (2.1 m). 399.0 181.0 EachTwo 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

RF-N7-2-126 Non-Penetrating Roof Frame, 7 ' (2.1 m). 416.9 189.1 EachTwo 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

Non-Penetrating Roof Frame, 10' 6" (3.2 m) wideRF-N10-B Non-Penetrating Roof Frame, 10' 6" (3.2 m). 356.3 161.6 Each

2-3/8" (60.3 mm) OD pipe not included.RF-N10-3-72 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 421.1 191.0 Each

Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.

RF-N10-3-96 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 442.7 200.8 EachThree 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

RF-N10-3-126 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 469.7 213.1 EachThree 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

RF-N10-4-72 Non-Penetrating Roof Frame, 10' 6" (3.2 m). 442.7 200.8 EachFour 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.




non-penetrating roof frames continued on next page


46/1161

non-penetrating roof framescontinued





Non-Penetrating Roof Frame, 12' 6" (3.8 m) wideRF-N12-B Non-Penetrating Roof Frame, 12' 6" (3.8 m). 372.0 168.7 Ea

2-3/8" (60.3 mm) OD pipe not included.RF-N12-3-72 Non-Penetrat ing Roof Frame, 12' 6" (3.8 m). 436.8 198.1 Eac

Three 2-3/8"OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.

RF-N12-3-96 Non-Penetrat ing Roof Frame, 12' 6" (3.8 m). 458.4 207.9 EacThree 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

RF-N12-3-126 Non-Penetrating Roof Frame, 12' 6" (3.8 m). 485.4 220.2 EacThree 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

RF-N12-4-72 Non-Penetrat ing Roof Frame, 12' 6" (3.8 m). 458.4 207.9 EacFour 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.


RF-N12-4-126 Non-Penetrating Roof Frame, 12' 6" (3.8 m). 523.2 237.3 EacFour 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

Non-Penetrating Roof Frame, 14' 6" (4.5 m) wideRF-N14-B Non-Penetrating Roof Frame, 14' 6" (4.5 m). 374.0 169.6 Ea

2-3/8" (60.3 mm) OD pipe not included.RF-N14-3-72 Non-Penetrat ing Roof Frame, 14' 6" (4.5 m). 438.8 199.0 Eac

Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m)pipe mounts included.

RF-N14-3-96 Non-Penetrat ing Roof Frame, 14' 6" (4.5 m). 460.4 208.8 EacThree 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)pipe mounts included.

RF-N14-3-126 Non-Penetrating Roof Frame, 14' 6" (4.5 m). 487.4 221.1 EacThree 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.


RF-N14-4-96 Non-Penetrat ing Roof Frame, 14' 6" (4.5 m). 489.2 221.9 EacFour 2-3/8" OD x 96" (60.3 mm OD x 2.4 m)

pipe mounts included.RF-N14-4-126 Non-Penetrating Roof Frame, 14' 6" (4.5 m). 525.2 238.2 Eac

Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m)pipe mounts included.

non-penetrating roof frame

universal tripod ballast mount roof-top ladder tray wall coaxial cable support kits


47/116

multi-sector roof frame


Application: Roof-topSize: 10' (3 m) faceDesign: Triangular 3-sector frameFeature: Single mounting solution

Mounts to: Penetrating or non-penetratingMaterial: Hot dip galvanized steelIncludes: Mount and U-boltsOrder Separately:Mounting pipes, sled kit, and rubber mats


Part Number Description Wt. lb Wt. kg Kit QtMT-180 Multi-Sector Roof Frame. Order 2-3/8" 465.6 211.2 Each

(60.3 mm) OD pipes separately.MT-181 Non-Penetrating Sled Kit for Multi-Sector 190.3 86.3 Each

Roof FrameMT-F1637 Rubber Mat, 1/2" x 18" x 48" 16.2 7.3 Each

(12.7 mm x 0.5 m x 1.2 m).*Six mats required for sled kit.

non-penetrating roof mount Application: Roof-top

Size: 35" (0.9 m) square baseDesign: Non-penetratingFeature: Simple bolt together designMounts to: Material: Hot dip galvanized steelIncludes: Mast, supports, and ballast trayOrder Separately:Rubber mats


Part Number Description Wt. lb Wt. kg Kit QtRM-SM190-60 Non-Penetrating Roof Mount 60.0 27.2 Each


*additional roof frame sizes available, contact your customer support center

multi-sector roof frame

optional sled kit


48/1163

roof-top mount


Application: Roof-topSize: 11' (3.4 m) faceDesign: Single sector roof mount, 2-3/8" OD designFeature: Adjustable face design

Mounts to: Material: Hot dip galvanized steelIncludes: MountOrder Separately:Pipe, cross-over kits, and anchors



Part Number Description Wt. lb Wt. kg KitTP-100 Roof-top Mount 383.0 173.7 Each

multi-sector roof-top mount Application: Roof-topSize: 12' 6" (3.8 m) faceDesign: Triangular 3-sector frame, 2-3/8" OD designFeature: Adjustable face designMounts to: Material: Hot dip galvanized steelIncludes: MountOrder Separately:Pipe, cross-over kits, and anchors


Part Number Description Wt. lb Wt. kg KitTP-300 Multi-Sector Roof-top Mount 568.6 257.9 Ea


49/116

universal tripod mounts


Application: Roof-topSize: 2-3/8" (60.3 mm) or 4-1/2" (114.3 mm) ODDesign: Heavy duty tripod mountFeature: Interchangeable base unit

Mounts to: Material: Hot dip galvanized steelIncludes: Mount, with or without pipeOrder Separately:Roof sled and pipe

Wind Rating*:85 mph (BWS) per latest revision of TIA/EIA 222Exposure "C" per UBC, at 100' AGL

*Typical installation of (1) 6 ft dish using 4-1/2" pipe mastSee Engineering Data Table for ballast



Universal Tripod Mount, 2-3/8" (60.3 mm) ODTP-G238-B Universal Tripod Mount, base only for 2-3/8" 114.3 51.8 Each

(60.3 mm) OD pipe (purchased separately).TP-G238-72 Universal Tripod Mount, 2-3/8" OD x 72" 135.9 61.6 Each

(60.3 mm OD x 1.8 m)TP-G238-96 Universal Tripod Mount, 2-3/8" OD x 96" 143.1 64.9 Each


(60.3 mm OD x 3.2 m)

Universal Tripod Mount, 4-1/2" (114.3 mm) ODTP-G412-B Universal Tripod Mount, base only for 4-1/2" 173.4 78.7 Each

(114.3 mm) OD pipe (purchased separately).TP-G412-72 Universal Tripod Mount, 4-1/2" OD x 72" 238.2 108.0 Each




(114.3 mm OD x 3.8 m)

non-penetrating roofballast sled for tripods Application: Roof-topSize: 87" (2.2 m) facesDesign: Converts tripods to non-penetratingFeature: Three ballast traysMounts to: Material: Hot dip galvanized steelIncludes: Sled onlyOrder Separately:Tripod and rubber mats


Part Number Description Wt. lb Wt. kg Kit QtMT-416 Non-Penetrating Roof Sled. 171.7 77.9 Each

Order tripod mount separately.MT-F1637 Rubber Mat, 1/2" x 18" x 48" 16.2 7.3 Each

(12.7 mm x 0.5 m x 1.2 m).*Six mats required for ballast tray.



50/1165



multi-sector cluster mount Application: Roof-topSize: 4-1/2" (114.3 mm) stand-offDesign: 3-sector clamp-on mount

Feature: Ideal for tripodsMounts to: 4"6" (101.6152.4 mm) OD memberMaterial: Hot dip galvanized steelIncludes: Brackets and u-boltsOrder Separately:2-3/8" OD (60.3 mm) pipe



non-penetrating parapetroof mount



Non-Penetrating Parapet Roof Mount RF-PM86 Non-Penetrating Parapet Mount, 72.7 33.0 Eac

with 2-3/8" OD x 86" (60.3mm OD x 2.2m)Adjustable Mast Pipe

TP-MSC Multi-Sector Cluster Mount 44.7 20.3 Ea

App: Roof-topSize: 36" (0.9 m) x 49" (1.2 m) frame with a 2-3/8"

(60.3 mm) x 86" (2.2 m) mounting pipe

Design: Non-penetratingFeature: Adjustable stand-offMounts to: Material: AluminumIncl.: Mount and hardwareOrder Sep.:


51/116

aluminum tripod mount


Application: Roof-topSize: 10' (3 m) highDesign: Temporary mountFeature: Lightweight, mobile use

Mounts to: Ballast-secured designMaterial: AluminumIncludes: MountOrder Separately:


Part Number Description Wt. lb Wt. kg Kit QtMT-423 Aluminum Tripod Mount, 2-3/8" OD x 10' 35.0 15.9 Each

(60.3 mm OD x 3 m) mast

stand-off wall mount Application: Roof-topSize: 36" stand-offDesign: Welded stand-off mountFeature: Heavy duty for microwave antennasMounts to: WallsMaterial: Hot dip galvanized steelIncludes: Bracket, stiff-arm, and wall mount hardwareOrder Separately:3-1/2" (88.9 mm) or 4-1/2" (114.3 mm) OD pipe


Part Number Description Wt. lb Wt. kg Kit QtDM-300 Stand-off Wall Mount, 36" (0.9 m), for solid 151 68.4 Each

and hollow walls. Includes 72" (1.8 m) stiff arm.



52/1167

cantilever wallmount bracket


Application: Roof-topSize: 14-1/2" (368.3 mm) wide, 2-3/4" or

5-1/2" depth

Design: Z-shaped wall bracketsFeature: Low profile designMounts to: Solid or hollow wallsMaterial: Hot dip galvanized steelIncludes: Two brackets, U-bolts, anchors, and

wall mount hardwareOrder Separately:2-3/8" (60.3 mm) OD pipe



Part Number Description Wt. lb Wt. kg KitMT-250 Cantilever Wall Mount Bracket. Order 2-3/8" 20.6 9.3 Kit of

(60.3 mm) OD pipe separately.MT-250L Cantilever Wall Mount Bracket. 5-1/2" Stand-off. 24.5 11.1 Kit

Order 2-3/8" (60.3 mm) OD pipe separately.

corner wall mounts Application: Roof-topSize: Four versionsDesign: V-shaped corner mountFeature: Adjustable clamp spacingMounts to: Wall cornersMaterial: Hot dip galvanized steelIncludes: Two brackets, pipe mount, and wall mount

hardwareOrder Separately:



Corner Wall Mount with 2-3/8" OD antenna pipeCW-M2-63 Corner Wall Mount, 2-3/8" OD x 63" 123.7 56.1 Each

(60.3 mm OD x 1.6 m) pipe.CW-M2-96 Corner Wall Mount, 2-3/8" OD x 96" 133.6 60.6 Each

(60.3 mm OD x 2.4 m) pipe.

Corner Wall Mount with 4-1/2" OD antenna pipeCW-M4-63 Corner Wall Mount, 4-1/2" OD x 63" 161.5 73.3 Each

(114.3 mm OD x 1.6 m) pipe.CW-M4-96 Corner Wall Mount, 4-1/2" OD x 96" 191.2 86.7 Each

(114.3 mm OD x 2.4 m) pipe.


53/116

adjustable wall mounts


Application: Roof-topSize: 12" (304.8 mm) square plate, 6-1/4" or 12" depthDesign: Welded dual bracketsFeature: Variable spacing flexibility

Mounts to: Versions for hollow or solid wallsMaterial: Hot dip galvanized steelIncludes: Two wall brackets and backing plates or anchorsOrder Separately:U-bolts and 2-3/8" or 4-1/2" OD (60.3 mm or

114.3 mm) pipe



Adjustable Wall Mounts 6" Stand-off, Hollow, or Solid WallMT-221 Adjustable Wall Mount for Hollow Walls 68.6 31.1 Kit of 2

with 6" stand-off, includes backing platesMT-222 Adjustable Wall Mount for Solid Walls 45.5 20.6 Kit of 2

with 6" stand-off, includes wall anchors

Adjustable Wall Mounts 12" Stand-off, Hollow, or Solid WallMT-221L Adjustable Wall Mount for Hollow Walls 75.3 34.2 Kit of 2

with 12" stand-off, includes backing platesMT-222L Adjustable Wall Mount for Solid Walls 50.7 23.0 Kit of 2

with 12" stand-off, includes wall anchors

Optional Backing PlateMT-223 Backing Plate Kit (optional) 23.1 10.5 Kit of 2

GPS antenna wall mount Application: Roof-topSize: 3/4" OD x 48" (19.1 mm x 1.2 m)Design: Welded mount with 6" (152.4 mm) stand-offFeature: Threaded end for GPS antennasMounts to: WallsMaterial: Hot dip galvanized steelIncludes: MountOrder Separately:Anchoring hardware


Part Number Description Wt. lb Wt. kg Kit QtVC-GPSWM GPS Antenna Wall Mount, 3/4" OD x 48" 10.5 4.8 Each

(19.1 mm x 1.2 m)



54/1169

self splicing, coax cover kitsfor snapstak snap-in hangers


Application: Roof-topSize: 8' (2.4 m) longDesign: Self-splicing cover with PVC sleeper supports and

hold-down clamps, simplified cover installationFeature: Stack up to (2) 1-5/8" or (3) 7/8" SnapStak

hangers per hole three versionsMounts to: Non-penetrating designMaterial: Galvanized steelIncludes: Channel, three sleepers, hold-down clamps, and

hardwareOrder Separately:Adjustable splice for roof-top coaxial cable bridge

9 6

( 2. 4 m )

4 Square(101.6mm)

11-1/4, 21-1/4 or 33(285.8mm, 539.8mm or 838.2mm)

7(177.8



Part Number Description Wt. lb Wt. kg KitRT-CB4D Roof-Top Cover Kits for SnapStak 86.0 39.0 E

Snap-in Hangers, 4 holesRT-CB8D Roof-Top Cover Kits for SnapStak 122.5 55.6 E

Snap-in Hangers, 8 holesRT-CB12D Roof-Top Cover Kits for SnapStak 162.5 73.7 E

Snap-in Hangers, 12 holes

self splicing roof-top coaxbridge kits Application: Roof-topSize: 8' (2.4 m) longDesign: Self-splicing cover with PVC sleeper supports

and hold-down clamps, simplified cover instal-lation

Feature: 4-, 8- and 12-run versionsMounts to: Non-penetrating designMaterial: Galvanized steelIncludes: Channel, three sleepers, hold down clamps,

and hardwareOrder Separately:Adjustable splice for roof-top coaxial cable

bridge

4 Square(101.6mm)

3-1/2(88.9mm)

96(2.4m)

11-1/4 or 21-1/4(285.8mm or 539.8mm)

Ordering InformationPart Number Description Wt. lb Wt. kg KitMT-F1542-11 Roof-Top Coax Bridge Kit for 4 runs of coaxial 76.6 34.7 Ea

cable.12-gauge (3 mm) cover.MT-F1543 Roof-Top Coax Bridge Kit for 8 runs of coaxial 112.3 50.9 Ea

cable.12-gauge (3 mm) cover.MT-F1595 Roof-Top Coax Bridge Kit for 12 runs of 180.4 81.8 Ea

coaxial cable.12-gauge (3 mm) cover,includes 4 and 8 run covers.

Shown with double 1-5/8" SnapStak hangers. Allows triple stacking of 7/8" SnapStak hangers.


55/116

adjustable splice for roof-topcoax bridge kits


Application: Roof-topSize: Design: Slotted splice plate

Feature: Up to 45 horizontal adjustmentMounts to: Roof-top bridge kitsMaterial: Galvanized steelIncludes: Splice and hardwareOrder Separately:


Part Number Description Wt. lb Wt. kg Kit QtMT-F1573-11 Adjustable Splice for 4-run bridge kit 3.7 1.7 EachMT-F1574 Adjustable Splice for 8-run bridge kit 9.5 4.3 EachMT-F1597 Adjustable Splice for 12-run bridge kit 19.9 9.0 Each


hardware kits fortripod mounts

roof-top cable traystep over

Application: Roof-topSize: 7/8" (22.2 mm) threaded rodDesign: Anchor and thru-roof designsFeature: Secures tripod in penetrating applicationsMounts to: Solid or hollow surfacesMaterial: GalvanizedIncludes: Bolts and hardwareOrder Separately:Tripod



MT-421 Anchor Set for Galvanized Tripod Mount 4.8 2.2 EachMT-422 Thru-Bolt Set for Galvanized Tripod Mount 8.5 3.9 Each



Roof-Top Cable Tray Step Over RT-ST Roof-Top Cable Tray Step Over 211.0 95.7 Each

MT-421 MT-422

App.: Roof-topSize: 36" (914.4 mm) x 71.5" ( 1816.1 mm) x

16.25" (412.75 mm)Design: Bolt together stepFeature: Step over for Ladder Tray systemsMounts to: Up to 24" wide ladder trayMaterial: Hot dip galv. steelIncl.: Step over and hardwareOrder Sep.: Ladder tray


56/1161

extension kit for roof-topcoax bridge kits


Application: Roof-topSize: Design: Hinged extension for roof bridgeFeature: Up to 45 vertical adjustmentMounts to: Roof-top bridge kitsMaterial: Galvanized steelIncludes: Extension and hardwareOrder Separately:


PVC roof sleepers Application: Roof-topSize: Seven widthsDesign: 4" (101.6 mm) square coaxial cable supportFeature: 3/4" (19.1 mm) holes for SnapStak

snap-in hangersMounts to: Non-penetrating designMaterial: PVCIncludes: Order Separately:

4(101.6mm)

1/4 dia.(6.4mm)

7/16 dia.(11.1mm)

3/4 dia.(19.1mm)

4(101.6mm)


Part Number Description Wt. lb Wt. kg KitMT-F1585 PVC Roof Sleeper, no holes, 8' (2.4 m) long 14.4 6.5 EacMT-F1724 PVC Roof Sleeper for 3 runs of coaxial cable 2.4 1.1 EaMT-F1598 PVC Roof Sleeper for 4 runs of coaxial cable 2.9 1.3 EaMT-F1725 PVC Roof Sleeper for 6 runs of coaxial cable 5.4 2.4 EaMT-F1599 PVC Roof Sleeper for 8 runs of coaxial cable 5.3 2.4 EaMT-F1726 PVC Roof Sleeper for 9 runs of coaxial cable 5.7 2.6 EaMT-F1600 PVC Roof Sleeper for 12 runs of coaxial cable 7.3 3.3 Eac

4 0 ( 1 .0 m )

2 4 ( 6 1 0 m m )

12 or 21-1/4(304.8mm or 539.8mm)


Part Number Description Wt. lb Wt. kg KitMT-F1703 Extension Kit for 4-run bridge kit 30.0 13.6 EaMT-F1704 Extension Kit for 8-run bridge kit 39.0 17.7 Ea


57/116

rubber sleeper pad


Application: Roof-topSize: 2 sizesDesign: Pad to protect roof surfaceFeature: Prevents slippage

Mounts to: Material: RubberIncludes: Order Separately:Sleepers


Part Number Description Wt. lb Wt. kg Kit QtCT-P4 Rubber Sleeper Pad, 4" x 1/4" x 10' 5.8 2.6 Each

(101.6 mm x 6.4 mm x 3 m) rollCT-P50 Rubber Sleeper Pad, 4 x 1/4 x 50 35 158 Each

(101.6 mm x 6.4 mm x 15.2 m) roll

1/4(6.4 mm)

4

( 1 0 1. 6

m m )

10 or 50(3.0 m or 15.2 m)

rubber mat Application: Roof-topSize: 1/2" x 18" x 48" (12.7 x 183.0 x 1.2 m)Design: Pad to protect roof surfaceFeature: Prevents slippageMounts to: Material: RubberIncludes: Order Separately:


Part Number Description Wt. lb Wt. kg Kit QtMT-F1637 Rubber Mat, 1/2" x 18" x 48" 16.2 7.3 Each

(12.7 mm x 0.5 m x 1.2 m)



58/116


59/116


horizontal z-brackets Application: Roof-topSize: 3/4" (19.1 mm) and 7/16" (11.1 mm) holesDesign: Z-shaped coaxial cable bracketFeature: Fits any hanger styleMounts to: Material: Hot dip galvanized steelIncludes: Z-bracketOrder Separately:Mounting anchors


Part Number Description Wt. lb Wt. kg Kit QtZB-H4 Horizontal Z-bracket, 11" (279.4 mm) wide 2.6 1.2 Each

for 7 runs of coaxial cableZB-H8 Horizontal Z-bracket, 23" (584.2 mm) wide 5.3 2.4 Each

for 14 runs of coaxial cableZB-H12 Horizontal Z-bracket, 35" (889 mm) wide 8.1 3.7 Each

for 22 runs of coaxial cable

z-bracket, wall coax supportcovers for snapstak hangers Application: Roof-topSize: 8' (2.4 m) longDesign: Solid cover for 4-, 8-, and 12-hole Z-bracketsFeature: Stack up to (2) 1-5/8" or (3) 7/8"

SnapStak hangers per hole three versionsMounts to: Penetrating designMaterial: Galvanized steelIncludes: CoverOrder Separately:Z-brackets and anchors




WC-SC4D Z-bracket, Wall Coax Support Covers 73.3 33.2 Eachfor SnapStak Hangers. ZB-H4 Z-bracketssold separately.



allows double stacking of 1-5/8" SnapStak hangersallows triple stacking of 7/8" SnapStak hangers


60/1165

4" ladder tray,straight sections


Application: Roof-topSize: 12' (3.7 m) longDesign: Ladder-style coaxial cable supportFeature: 4" (101.6 mm) with three widthsMounts to: Non-penetrating designMaterial: AluminumIncludes: Ladder and one pair of splice platesOrder Separately:Covers and accessories



Part Number Description Wt. lb Wt. kg KitLT-12-4D Ladder Tray Straight Section, 12" (0.3 m) wide 19.2 8.7 ELT-18-4D Ladder Tray Straight Section, 18" (0.5 m) wide 21.6 9.8 ELT-24-4D Ladder Tray Straight Section, 24" (0.6 m) wide 23.9 10.8 E

4" ladder tray, 45horizontal bends Application: Roof-top

Size: 24" (0.6 m) bend radiusDesign: Ladder-style coaxial cable supportFeature: 4" (101.6 mm) with three widthsMounts to: Ladder tray systemMaterial: AluminumIncludes: Ladder and one pair of splice platesOrder Separately:Covers and accessories



LT-C45-12-4D Ladder Tray 45 Degree Bend, 12" (0.3 m) wide 3.5 1.6 EaLT-C45-18-4D Ladder Tray 45 Degree Bend, 18" (0.5 m) wide 4.2 1.9 EaLT-C45-24-4D Ladder Tray

Documents

Steel Part Catalog