Transfer Database From 5.9 – 6.4 When Changing Computers

Start on Customers Current Host

1. Print Shop Data Setup

2. Backup database on 5.9 system

Transfer Database From 5.9 – 6.4 When Changing Computers

3. Copy Smcore32 from C:\Mitchell1\Manager\Series2\mdb to a thumb drive.

Transfer Database From 5.9 – 6.4 When Changing Computers

4. Go to Machine that has 5.9 & 6.4 already installed

5. Rename current Smcore32.mdb file

6. Paste Smcore32 from thumb drive to C:\Mitchell1\Manager\Series2\mdb

7. Open manager and verify data in setup from Shop data printed from original machine.

Transfer Database From 5.9 – 6.4 When Changing Computers

8. This screen is normally all (none) after copy

Transfer Database From 5.9 – 6.4 When Changing Computers

9. Insert 6.4e disc in dvd drive

10. Start Migration Utility Tool in C:\Program Files (x86)\M1-SK\Teamworks

Transfer Database From 5.9 – 6.4 When Changing Computers

11. Select source of manager mdb C:\Mitchell1\Manager\Series2\mdb

Note: should be Series1 for manager Series2 for managerplus

12. When selected correctly loads smcore32.mdb, dbys.pps and series20.inf

Transfer Database From 5.9 – 6.4 When Changing Computers

13. Find car32.mdb

14. Find series20.ini

15. Start Migration

16. After Migration create backup on thumb drive.

Transfer Database From 5.9 – 6.4 When Changing Computers

17. Install Manager SE on new machine.

18. Restore database on New Host machine

19. Go to C:\Program Files (x86)\M1-SK\Teamworks

Transfer Database From 5.9 – 6.4 When Changing Computers

20. Start Restore

21. Find bak file on thumb drive

22. Open manager after restore and verify printers /reports and all setup data

23. May have to run 6.4.612.exe from manager files @ m1files.com

Step by step it is EASY