STANLEY - 18V CORDLESS RANGE · 2021. 3. 15. · • 18V STANLEY® FATMAX® V20 Cordless System 2.0 or 4.0Ah battery recommended (supplied separately) • Part of the new 18V STANLEY®

18V CORDLESS RANGEPOWER TOOLS & OUTDOOR TOOLS

STANLEYTOOLS.COM.AU/V20

A FULL CORDLESS SYSTEM.Get the benefit of a true power tool system based around the long lasting next generation V20 cordless battery technology. The extensive range includes high quality tools from drills, drivers and cutting tools to outdoor equipment and more.

2

DEPENDABILITYMATTERS.Do more projects. Do more renovations. Do more in the garden. Our new 18V STANLEY® FATMAX® V20 cordless system is built to withstand whatever gets thrown at it and with improved battery technology it delivers all the performance you need for a good day’s work. Because dependability matters.

IMPROVED BATTERYTECHNOLOGY

MINIMAL SELFDISCHARGE

LONGERBATTERY LIFE

NO MEMORYEFFECT

PROFESSIONAL GRADE BATTERY CELLS Our new and improved batteries are made from professional grade 18650 type Samsung battery cells with lower impedance for more power.

PROTECTION FROM EXTREME TEMPERATURES V20 batteries are protected from discharging in extreme temperatures, from -30°C to +75°C.

FULLY AUTOMATED ASSEMBLY Built on an automated assembly line in sterile conditions for improved build quality and greater reliability.

VIGOROUSLY TESTED Our battery packs are vigorously tested for moisture ingress, thermal shock, drop and vibration as part of the approvals process.

3

IMPROVED BATTERYTECHNOLOGY.Our new 18V lithium-ion V20 battery pack lies at the heart of the system and it is fully compatible with all the power tool and outdoor products in the V20 range. With improved battery technology, no memory effect and minimal self discharge, it is ready to go to work whenever you are and wherever the job takes you and it will last longer too.

4

HIGHER RATED SWITCHManages the higher energy flow from lower impedance battery packs.

OVERLOAD PROTECTIONUnit monitors current load every 0.005 seconds to prevent overload.

TEMPERATURE PROTECTIONUnit stops operating to protect itself if it gets too hot. Operating temperature range up to 95°C.

VIGOROUSLY TESTEDTested for moisture ingress, thermal shock, drop and vibration to ensure they’re fit for the job.

IMPROVED MOTORSProfessional grade motors for improved performance and longer life.

PRO GRADE BUILD2+1 Tab build allows for better energy flow, cooler packs, and more cycle time.

UPGRADED SBS MODULE*Programmed to accommodate and adjust performance for higher capacity packs.

PROFESSIONAL TOOLPERFORMANCE.

*Brushless only

New & improved professional grade tools that are now even harder to beat, designed to withstand whatever gets thrown at them.

5

The V20 range includes tools with brushless motors that use a contactless electronic controller that continually switches the electrical phase to keep the motor turning rather than carbon brushes, giving the tools significant benefits over brushed models.

TECHNOLOGY.

MORE POWER

MORE POWERBrushless motors don’t lose energy in wasted friction or heat giving you more power for demanding applications.

MORE RUNTIME

MORE RUNTIMEThe use of a contactless electronic controller rather than carbon brushes means that less battery energy is wasted so the tool can work for longer on the same battery pack.

COMPACT MOTOR

COMPACT MOTORBrushless tools are more compact due to the smaller motor design making them lighter to use and easier to operate in hard to reach applications.

6

DRILLING CUTTING

FASTENING EXPANSION

OUTDOOR BATTERIES AND CHARGERS

7

Our combo kits are filled with value and designed to kick start your V20 system. Whether you're finishing a project, planning your next renovation or simply need a set of back up tools, our kits have you covered.

COMBO KITS

8

18V STANLEY® FATMAX® V20 4 PIECE COMBO KIT

• Featuring 1 x SFMCD711 Hammer Drill, 1 x SFMCF800 Impact Driver, 1 x SFMCS500 Circular Saw and 1 x SFMCG400 Angle Grinder

• Integral battery state of charge indicator for convenient monitoring of battery charge levels.

• The Hammer Drill features a powerful hammer action providing up to 25,500 BPM for efficient drilling into masonry and a motor providing up to 1,500 RPM and 50Nm of torque for efficient drilling and screwdriving into wood, metal and plastic.

• The Impact Driver features a powerful motor providing up to 2,800 RPM, 3,100 BPM and 165Nm of torque for driving larger fasteners and other high torque applications, as well as a quick release chuck for easy one-handed bit changes.

• The Circular Saw features a powerful high-performance motor providing up to 4,000 RPM's for easy work of everyday cross and rip cuts, and a tool-free beveling shoe that pivots up to 50° for angled cuts.

• The Angle Grinder features a high-performance motor providing 9,000 RPM's for aggressive applications, a cast metal gear housing which dissipates heat during extended periods of use and a 3-position handle for comfort and control.

Product Code Tool Battery Storage

SFMCK469M2-XE

Hammer DrillImpact DriverCircular SawAngle Grinder

2x 4.0Ah Soft Bag

9

18V STANLEY® FATMAX® V20 2 PIECE COMBO KIT

• Featuring 1 x SFMCD711 Hammer Drill and 1 x SFMCF800 Impact Driver

• With improved battery technology, no memory effect and minimal self-discharge, the V20 lithium ion battery pack is ready to go to work whenever you are and wherever the job takes you - and it will last longer too.

• Integral battery state of charge indicator for convenient monitoring of battery charge levels.

• The Hammer Drill features a powerful motor providing up to 1,500 RPM and 50Nm of torque for efficient drilling and screwdriving into wood, metal and plastic, 24 clutch settings to control the depth of the fastener you’re driving and 2-Speed gearbox with speeds of 0-350/0-1,500 RPM for greater control over the job.

• The Impact Driver features a powerful motor providing up to 2,800 RPM, 3,100 BPM and 165Nm of torque for driving larger fasteners and other high torque applications, as well as a quick release chuck for easy one-handed bit changes

• Part of the new 18V STANLEY® FATMAX® V20 Cordless System - power all your V20 tools with a common new & improved 18V lithium ion battery to let you power through work with ease.


SFMCK465D2S-XE Hammer Drill Impact Driver 2x 2.0Ah Soft Bag

10

A cordless drill is an essential piece of any toolbox, and our range of V20 drills offers a variety of both brushed and brushless products to tackle any drilling or screwdriving tasks.

DRILLING

11


SFMCD700D2S-XE Drill Driver 2x 2.0Ah Soft Bag

18V STANLEY® FATMAX® V20 DRILL DRIVER

• Powerful motor providing up to 1,500 RPM and 50Nm of torque for efficient drilling and screwdriving into wood, metal and plastic

• 24 Clutch settings to control the fastener driving depth

• 2-Speed gearbox with speeds of 0-350/0-1,500 RPM for greater control over the job

• Integral LED worklight for improved visibility

• Keyless chuck for easy bit changes

• Integral battery state of charge indicator for convenient monitoring of battery charge levels

RPM

1,500NM

50

12


SFMCD720B-XE Brushless Drill Driver - -

SFMCD720DR2-XE Brushless Drill Driver 1x 2.0Ah 1x 6.0Ah Soft Bag

18V STANLEY® FATMAX® V20 BRUSHLESS DRILL DRIVER

• Brushless motor technology for improved power efficiency and longer runtime


• 15 Clutch settings to control fastener driving depth


• Integral LED worklight for improved visibility• Integral battery state of charge indicator for

convenient monitoring of battery charge levels*

RPM

2,100NM

80

*SFMCD720DR2-XE only

13

18V STANLEY® FATMAX® V20 HAMMER DRILL

• Powerful hammer action provides up to 25,500 BPM for efficient drilling into masonry


• 24 Clutch settings to control the fastener driving depth





SFMCD711DM2-XE Hammer Drill 1x 2.0Ah1x 4.0Ah Soft Bag

BPM

25,500NM

50

14

18V STANLEY® FATMAX® V20 BRUSHLESS HAMMER DRILL




• 15 Clutch setting to control fastener driving depth

• 2-Speed gearbox with speed of 0-600/0-2,100 RPM for greater control over the job

• Integral battery state of charge indicator for convenient monitoring of battery charge levels*


SFMCD721B-XE Brushless Hammer Drill - -

SFMCD721DR2-XE Brushless Hammer Drill 1x 2.0Ah1x 6.0Ah Soft Bag

BPM

35,700NM

80

*SFMCD721DR2-XE only

15

18V STANLEY® FATMAX® V20 BRUSHLESS SDS+ HAMMER DRILL



• 2.0J of impact energy allows for efficient drilling and chiseling in concrete and aggregates

• 3 Modes (hammer drilling, chiselling and rotary drilling)

• Variable speed switch for maximum application control

• Compact and lightweight design with contoured overmoulded handle for added comfort and safety


SFMCH900B-XE SDS+ Hammer Drill - -

BPM

5,500

16

No matter what the application is, our range of cutting tools has the solution for the job. From the control and flexibility of a multi-tool to the power of an angle grinder or reciprocating saw for the demanding renovation.

CUTTING

17

18V STANLEY® FATMAX® V20 190MM MITRE SAW


SFMCS701M2-XE 190mm Mitre Saw 2x 4.0Ah -

RPM

3,800190mm


• Perform accurate slide mitre, 90˚ cross cuts, 47° - 47° mitre cuts, 0˚ - 45˚ bevel cuts and compound cuts

• Powerful motor provides 3,800 RPM for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease

• Innovative shadow-cut line system projects two LED light beams onto either side of the blade, creating a shadow on the cutting surface, for millimetre perfect cuts everytime

• Lightweight design and side carry handle for portability

• Connect to a vacuum hose for hassle-free dust extraction and a cleaner workspace.

18

18V STANLEY® FATMAX® V20 MULTI TOOL

• Tool-free accessory system makes adjusting and changing attachments quick and easy

• Variable speed for maximum control across a variety of applications and materials


• Clean and efficient plunge cuts, trimming of excess materials, detail sanding in tight areas, removing grout, scraping old paint or adhesive and all manner of other jobs

• 18V STANLEY® FATMAX® V20 Cordless System 2.0 or 4.0Ah battery recommended (supplied separately)

• 18V STANLEY® FATMAX® V20 Cordless System - power all your V20 tools with a common new & improved 18V lithium ion battery to let you power through work with ease


SFMCE500B-XE Multi Tool - -

Tool FreeVariablespeed

19

18V STANLEY® FATMAX® V20 125MM ANGLE GRINDER

• Powerful high-performance motor provides 9000 RPM’s for aggressive applications

• Cast metal gear housing dissipates heat during extended periods of use

• 3-Position handle for comfort and control

• Lock-on switch for reduced fatigue during extended use


• Part of the new 18V STANLEY® FATMAX® V20 Cordless System - power all your V20 tools with a common new & improved 18V lithium ion battery to let you power through work with ease


SFMCG400B-XE 125mm Angle Grinder - -

RPM

9,000125mm

20

18V STANLEY® FATMAX® V20 RECIPROCATING SAW

• Powerful high-performance motor provides up to 3,000 SPM

• Variable speed for maximum control across a variety of applications and materials

• Tool-free blade change makes for quick and effortless blade changes

• Compact and lightweight design helps reduce user fatigue




SFMCS300B-XE Reciprocating Saw - -

SPM

3,000Tool Free

21

18V STANLEY® FATMAX® V20 165MM CIRCULAR SAW


SFMCS500B-XE 165mm Circular Saw - -

RPM

4,000165mm

• Powerful high-performance motor provides up to 4,000 RPM’s for easy work of everyday cross and rip cuts

• Tool-free beveling shoe pivots up to 50° for angled cuts

• Contoured over-molded handle for comfort

• Compact and lightweight design helps reduce user fatigue



22

18V STANLEY® FATMAX® V20 JIGSAW

• Variable speed trigger ranging from 0-2,500 SPM’s

• 3 Cut settings for various materials and applications

• Adjustable shoe for 45° bevel cuts

• Contoured over-molded handle for comfort

• Tool-free blade change - compatible with both T & U blades



SFMCS600B-XE Jigsaw - -

SPM

2,500Tool Free

23

A complete range of fastening tools with the benefits of a cordless system. Whether you’re driving larger fasteners, loosening a lug nut or installing skirting and paneling, the V20 range has a product for the job.

FASTENING

24

18V STANLEY® FATMAX® V20 IMPACT DRIVER


• Powerful motor providing up to 2,800 RPM, 3,100 BPM and 165Nm of torque for driving larger fasteners

• Quick release chuck for easy one-handed bit changes


• With improved battery technology, no memory effect and minimal self-discharge, the V20 lithium ion battery pack is ready to go to work whenever you are and wherever the job takes you - and it will last longer too



SFMCF800DM2-XE Impact Driver 1x 2.0Ah1x 4.0Ah Soft Bag

BPM

3,100NM

165

25

18V STANLEY® FATMAX® V20 BRUSHLESS IMPACT DRIVER


• Powerful motor providing up to 2,800 RPM, 3,500 BPM and 170Nm of torque for driving larger fasteners and other high torque applications






SFMCF810B-XE Brushless Impact Driver - -

BPM

3,500 NM

170

26

18V STANLEY® FATMAX® V20 BRUSHLESS 3 SPEED IMPACT DRIVER


• Integral battery state of charge indicator for convenient monitoring of battery charge levels*

• Powerful motor providing up to 2,900 RPM, 3,800 BPM and 190Nm of torque for driving larger fasteners and other high torque applications

• 3-Speed gearbox with speeds of 0-1300, 0-2600, 0-2900 RPMs



RPM

2,900NM

190


SFMCF820B-XE Brushless Impact Driver - -

SFMCF820D2K-XE Brushless Impact Driver 2x 2.0Ah Kit Box

*SFMCF820D2K-XE only

27

18V STANLEY® FATMAX® V20 IMPACT WRENCH

• Powerful motor providing up to 1700 RPM and 450Nm of torque for driving larger fasteners and other high torque applications

• Variable speed to control the fastener you're driving

• 1/2" Ring for ease of socket change

• Integral LED worklight for improved visibility in all working conditions




SFMCF900B-XE Impact Wrench - -

28

RPM

1,700NM

450

18V STANLEY® FATMAX® V20 16-GAUGE FINISHING NAILER• Battery powered design eliminates the need for

compressors, hoses or costly gas cartridges

• Drives adhesive collated 16-gauge finish nails

• Provides consistent firing power in changing weather conditions and materials

• Tool-free depth adjustment for quick and easy set-up

• Lightweight design with optimal center of gravity for improved balance and comfort in the hand



SFMCN616B-XE 16-Gauge Finishing Nailer - -

16Ga60J

29

Do more with the extensive range of expansion tools. Allowing you to use the V20 battery across a more diverse range of applications on the job or for recreational activities.

EXPANSION

30

18V STANLEY® FATMAX® V20 RANDOM ORBITAL SANDER

• Powerful motor provides 12,000 OPM’s for fast material removal

• High-performance dust collection system to control dust accumulation through an integral dust bag or the use of a vacuum connection

• Lightweight and low profile design provides additional control and reduced vibration

• Dust sealed switch provides improved durability

• Connect to a vacuum hose for hassle-free dust extraction and a cleaner workspace



SFMCW220B-XE Orbital Sander - -

OPM

12,000125mm

31

18V STANLEY® FATMAX® V20 7.5L WET AND DRY VAC

• Powerful motor for effective cleanup of wet and dry spills

• HEPA grade filter to capture 99.7% of all dust and allergens, for a cleaner, healthier work environment

• Large 7.5 Litre tank for less emptying

• 2.4M Hose for extended reach and flexibility

• On-board hose and accessory storage.



SFMCV002B-XE 7.5L Wet and Dry Vac - -

FILTER

HEPA 7.5l

32

18V STANLEY® FATMAX® V20 COMPACT BLOWER

• Comfortable, easy to use - compact and well balanced for continued use without fatigue

• More power, more run time - Powerful 3 speed motor delivers up to 200 KM/H air speed to quickly clean external work spaces

• 3 Attachments for multiple applications • 18V STANLEY® FATMAX® V20 Cordless System 2.0 or 4.0Ah

battery recommended (supplied separately)




SFMCBL01B-XE Compact Blower - -

KM/H

200SPEED

3

33

18V STANLEY® FATMAX® V20 INFLATOR

• Select either high or low for a variable volume of pressure which is ideal for many applications

• Multiple power sources for complete flexibility. Choose from a V20 battery, mains electricity or 12V DC

• Easy to read display with a digital PSI gauge

• Automatic shut off allows you to set your PSI and the unit will shut off once it is reached




SFMCE520B-XE Inflator - -

SETTINGS

2 3POWER

SOURCES

34

18V STANLEY® FATMAX® V20 FAN

• Powerful motor with 400 CFM for maximum airflow efficiency

• 3 Speed dial for optimum performance and control

• Up to 8 hours run time

• Compact and lightweight design helps reduce user fatigue when carrying

• 18V STANLEY® FATMAX® V20 Cordless System 4.0Ah battery recommended (supplied separately)

• Part of the new 18V STANLEY® FATMAX® V20 Cordless System - power all your V20 tools with a common new & improved 18V lithium to let you power through work with ease


SFMCE001B-XE Fan - -

400 3CFM SPEED

35

18V STANLEY® FATMAX® V20 HEAT GUN

• Powerful motor heats surfaces up to 510°celcius

• Compact design allows for use in confined spaces

• Comfortable, easy to use, compact and well balanced for continued use without fatigue

• 18V STANLEY® FATMAX® V20 Cordless System 2.0Ah or 4.0Ah battery recommended (supplied separately)


• Part of the new 18V STANLEY® FATMAX® V20 Cordless System - power all your V20 tools with a common new & improved 18V lithium to let you power through work with ease


SFMCE530B-XE Heat Gun - -

510° 2CELCIUS

ATTACHMENTS INCLUDED

36

18V STANLEY® FATMAX® V20 FLASHLIGHT

• Provides 140 LED lumens of light

• Pivoting head for hassle-free adjustment of light beam towards working area

18V STANLEY® FATMAX® V20 AREA LIGHT

18V STANLEY® FATMAX® V20 PIVOT LIGHT

• Provides up to 1825 lumens of light to illuminate those dark work areas

• Pivoting head for hassle-free adjustment of light beam towards working area

• More power, more run time with 3 LED light lens providing up to 700 Lumens of light to illuminate the work area

• Flexible lighting with pivot head and integrated hang hook


SFMCL020B-XE Flashlight - -


SFMCL030B-XE Area Light - -


SFMCL050B-XE Pivot light - -

37

Whether you are cutting logs, trimming hedges or clearing away leaves and garden debris, the tools you use need to be fully portable, long lasting and up to the job. Our V20 outdoor tools use batteries which are fully interchangeable with the V20 power tools so you can do more outdoors.

OUTDOOR

38

Product Code Tool Battery

SFMCST933M1-XE 33cm String Trimmer 1x 4.0Ah

18V STANLEY® FATMAX® V20 33CM STRING TRIMMER

• Large 33cm cutting swath for fast and effective trimming

• Automatic line feed mechanism feeds 1.6mm line when required

• Gear-drive transmission for increased torque and more cutting power

• High/low speed control and variable speed

• 2.4kg lightweight design with rubber auxillary handle and telescopic shaft for comfort

• Integrated hanging hook for safe storage

39


SFMCSTB933M-XE 33cm Brushless String Trimmer 1x 4.0Ah

18V STANLEY® FATMAX® V20 33CM BRUSHLESS STRING TRIMMER


• Large 33cm cutting swath for fast and effective trimming

• Gear-drive transmission for increased torque and more cutting power

• Bump-feed QUICKWIND™ spool system provides a strong 2mm dual line to tackle thicker grass and weeds

• High/low speed control and variable speed


40

18V STANLEY® FATMAX® V20 BRUSHLESS BLOWER


• High-performance brushless motor and axial fan design provides up to 9.9 m³/min and 160 KM/H to clear garden leaves and debris quickly and efficiently

• Boost mode will clear heavy debris with the push of a button

• Variable speed to maximise runtime efficiency and improved control

• 3.6kg lightweight, compact, comfortable and easy to use design



SFMCBL7M1-XE 18V Brushless Blower 1x 4.0Ah

41

18V STANLEY® FATMAX® V20 55CM HEDGE TRIMMER

• 55cm Long-lasting dual-action laser cut blade manufactured from hardened steel for a precise cut and long life

• Power Saw™ feature provides more power when you need it to cut branches as thick as 35mm quickly and easily

• Wrap around auxiliary handle for comfort, manoeuvrability and improved control


• Integral battery state of charge indicator



SFMCHT855M1-XE 55cm Hedge Trimmer 1x 4.0Ah

42

18V STANLEY® FATMAX® V20 30CM CHAINSAW

• 30cm Bar and 7.7m/s chain speed for fast, efficient cutting

• Chain brake safety mechanism stops the chain in <1 sec

• Auto-oiling system for minimal maintenance

• Tool-free chain tensioning system for quick and easy chain adjustments

• Bubble level for accurate, precise and level cuts, everytime



SFMCCS630M1-XE 30cm Chainsaw 1x 4.0Ah

43

18V STANLEY® FATMAX® V20 45CM POLE HEDGE TRIMMER

• 45cm Blade manufactured from hardened steel for a precise cut and long life

• Up to 3.4m extended reach to cut hard to reach hedges with your feet still firmly on the ground

• 180° Pivoting head and 5 adjustable cutting positions for versatility, improved productivity, comfort and control





SFMCPH845B-XE 45cm Pole Hedge Trimmer -

44

18V STANLEY® FATMAX® V20 20CM POLE SAW

• 20cm Bar and chain provides efficient cutting for smaller out of reach branches

• Up to 4.5m reach with extension pole to cut hard to reach branches with your feet still firmly on the ground

• Angled head and blade provide a precise cut for hard to reach branches

• Chain brake safety mechanism stops the chain in <1 sec

• Tooled for accurate chain adjustments



SFMCPS620B-XE 20cm Pole Saw -

45

The 18V STANLEY® FATMAX® V20 range includes 3 different sizes of batteries and 2 charger options so you can choose the best combination for your tools. Starter kits are also available and are a great addition to support your platform.

BATTERIES AND CHARGERS

46

V20BATTERY RANGEBatteries are available in three sizes, so you can choose the one that best suits your project. They also feature an integral battery state of charge indicator for convenient monitoring of battery charge levels.

The range also includes an adaptor so you can use your new 18V V20 2.0Ah batteries with any existing 18V STANLEY® FATMAX® cordless power tool you may have in your toolbox.

2.0Ah

Big on power and runtime, small in size. Ideal for general tasks such as drilling

4.0Ah

Big on power, massive on runtime. Ideal for the tougher jobs such as cutting or grinding

6.0Ah

Maximum power delivery for longer runtime. Ideal for the most demanding projects such as garden tidy or a day of renovations

47

18V STANLEY® FATMAX® V20 BATTERIES

18V STANLEY® FATMAX® V20 CHARGERS

18V STANLEY® FATMAX® V20 STARTER KITS

18V STANLEY® FATMAX® V20 ADAPTOR

• 3 Battery sizes available both seperately and as part of a starter kit

SFMCB14-XE • Charges 18V STANLEY® FATMAX® V20 2.0Ah battery in 30 minutes

SFMCB24-XE

• Simultaneous charging allows for two packs to charge at once

• Charges 18V STANLEY® FATMAX® V20 2x 4.0Ah packs in 60 minutes

• Comes with USB port to charge phones, tablets etc.

• Ideal for expanding your range of V20 batteries and chargers at great value


• Charge 18V STANLEY® FATMAX® V20 2.0Ah batteries in 60 minutes

• Converts 18V STANLEY® FATMAX® V20 2.0Ah batteries for use with older 18V STANLEY® FATMAX® cordless power tools.

Product Code Power

SFMCB202-XE 2.0Ah

SFMCB204-XE 4.0Ah

SFMCB206-XE 6.0Ah

Product Code Charging Ports

SFMCB14-XE x1

SFMCB24-XE x2

Product Code Battery Charger Type

SFMCB12D2-XE 2 x 2.0Ah 2A Single Port

SFMCB14M1-XE 1 x 4.0Ah 4A Single Port

Product Code Compatability

SFMCB100-XE 2.0Ah

48

SPECIFICATION CONTENTS INDEX

Tool Type Product Code Brushless 2.0AH 4.0AH 6.0AHCHARGER

TYPEKIT

BOXSOFT BAG PAGE

COMBO KITSSFMCK469M2-XE x 2 2A Single Port . 9

SFMCK465D2S-XE x 2 1.25A Single Port . 10

DRILLING

SFMCD700D2S-XE x 2 1.25A Single Port . 12

SFMCD720DR2-XE . x 1 x 1 2A Single Port . 13

SFMCD720B-XE . 13

SFMCD711DM2-XE x 1 x 1 2A Single Port . 14

SFMCD721DR2-XE . x 1 x 1 2A Single Port . 15

SFMCD721B-XE . 15

SFMCH900B-XE . 16

CUTTING

SFMCS701M2-XE x 2 2A Single Port 18

SFMCE500B-XE 19

SFMCG400B-XE 20

SFMCS300B-XE 21

SFMCS500B-XE 22

SFMCS600B-XE 23

FASTENING

SFMCF800DM2-XE x 1 x 1 2A Single Port . 25

SFMCF810B-XE . 26

SFMCF820D2K-XE . x 2 2A Single Port . 27

SFMCF820B-XE . 27

SFMCF900B-XE 28

SFMCN616B-XE 29

EXPANSION

SFMCW220B-XE 31

SFMCV002B-XE 32

SFMCBL01B-XE 33

SFMCE520B-XE 34

SFMCE001B-XE 35

SFMCE530B-XE 36

SFMCL020B-XE 37

SFMCL050B-XE 37

SFMCL030B-XE 37

18V STANLEY FATMAX V20 RANGE

49

18V STANLEY® FATMAX® V20 OUTDOOR ACCESSORIES

SKU DESCRIPTION FITS

STZST12169-XE Spool and Line, 1.6mm, 9m SFMCST933M1-XE

STZST121693-XE 3x Spool and Line, 1.6mm, 9m SFMCST933M1-XE

STZST1326-XE 2mm Twisted Line, 6m (x5)SFMCSTB933M1-XESFMCSTB963B-XE

STZST1226-XE QUICKWIND Head, Spool and Twisted Line, 2mm, 6m SFMCSTB933M1-XE

STZCS230-XE 30cm Chain - Pitch 3/8”, Gauge .043”, Links 45, and file size 5/32 SFMCCS630M1-XE

STZCS220-XE 20cm Chain - Pitch 3/8”, Gauge .043”, Links 34, and file size 5/32 SFMCPS620B-XE

SPECIFICATION CONTENTS INDEX

Tool Type Product Code Brushless 2.0AH 4.0AH 6.0AHCHARGER

TYPEKIT

BOXSOFT BAG PAGE

OUTDOOR

SFMCST933M1-XE x 1 2A Single Port 39

SFMCSTB933M-XE . x 1 2A Single Port 40

SFMCBL7M1-XE . x 1 2A Single Port 41

SFMCHT855M1-XE x 1 2A Single Port 42

SFMCCS360M1-XE x 1 2A Single Port 43

SFMCPH845B-XE 44

SFMCPS620B-XE 45

STARTER KITSSFMCB12D2-XE x 2 2A Single Port 48

SFMCB14M1-XE x 1 4A Single Port 48

50

51

All STANLEY FATMAX power tool products include a 1 year warranty as standard. In the event that your power tool becomes defective due to faulty materials or workmanship within 1 year of purchase, STANLEY guarantees to replace or repair all defective parts free of charge or - at our discretion - replace the item free of charge.

Register your STANLEY FATMAX power tools within 4 weeks of purchase and quality for an additional 2 years warranty.

YEARSTANDARDTRADEWARRANTY

YEARTRADEWARRANTY

OUR WARRANTY COVERS BOTH DIY AND TRADE APPLICATION

REGISTER YOUR TOOLS AT WWW.STANLEYTOOLS.COM/AU/WARRRANTY

52

National Customer Service - 1800 338 002Service Support - 1800 654 155Technical Support - 1800 816 900Facebook.com/StanleyToolsAustralia

Instagram @stanleytools_australia

AVAILABLE FROM

Documents

STANLEY - 18V CORDLESS RANGE · 2021. 3. 15. · • 18V STANLEY® FATMAX® V20 Cordless System 2.0 or 4.0Ah battery recommended (supplied separately) • Part of the new 18V STANLEY®