Standard Scanners Catalogue - NAMIKON 2001...2off WTOFI 12/60 60 deg plastic TOFD wedge M12 2off WTOFI 12/70 70 deg plastic TOFD wedge M12 1off TPCL00-L00 5M – 5m cables – Lemo00

Standard Scanners Catalogue

Version 8 Issued: January 2018

2

Disclaimer

The information in this price list is accurate at time of publication.

Phoenix Inspection Systems Limited has a policy of continuous development therefore actual products featured are subject to change and may differ from those presented herein.

Phoenix Inspection Systems Limited reserves the right to change products, specifications and pricing without forward notice.

3

Contents

Contents ..............................................................................................................................................3

MagMan ..............................................................................................................................................4

MultiMag .............................................................................................................................................5

Swift ....................................................................................................................................................6

Bracelet Scanner...................................................................................................................................7

Dual Bracelet........................................................................................................................................8

TOFD Caliper ........................................................................................................................................9

WREN ................................................................................................................................................ 10

R-Evolution ........................................................................................................................................ 11

Swipe................................................................................................................................................. 12

MapMan ............................................................................................................................................ 14

SAW Bug ............................................................................................................................................ 15

Tracer ................................................................................................................................................ 16

Sp-Arc ................................................................................................................................................ 17

C-Clamp Encoder ................................................................................................................................ 19

Wrap-It .............................................................................................................................................. 20

CDS.................................................................................................................................................... 22

PreAmplifier ....................................................................................................................................... 23

NozzleScan ......................................................................................................................................... 26

Duo………………………………………………………………………………………………………………………………………………………….30

4

4th Generation MagMan Circumferential and Longitudinal Weld Scanner

Covers from 2” OD circumferential and 9”OD seam welds,

through to flat

Wide PCS can be achieved if required with PCS adaptor bar

Wheels have suspension incorporated

Chain can be added to aid guidance providing more stable scanning especially for PA inspections

Additional tool posts easily added if required, up to 12 in total

Transverse tool post adaptors available – for transverse defect detection

Waterproof Encoder

MagMan - Phased Array/TOFD Model

Description Product code MagMan 2PA Encoder with 5m cable wired for VEO/PRISMA 2off toolposts with PA wedge cradles (specify PA wedge)

AE-MAGMAN-PA-2

MagMan 4PA Encoder with 5m cable wired for VEO/PRISMA 2off standard Toolposts with 30x30mm forks 2off toolposts with PA wedge cradles (specify PA wedge)

AE-MAGMAN-PA-4


AE-MAGMAN-PA-6


AE-MAGMAN-PA-8

MagMan - TOFD/PE Model

Description Product code MagMan 2 Encoder with 5m cable wired for VEO/PRISMA 2off standard Toolposts with 30x30mm forks

AE-MAGMAN-2

MagMan 4 Encoder with 5m cable wired for VEO/PRISMA 4off standard Toolposts with 30x30mm forks

AE-MAGMAN-4


AE-MAGMAN-6


AE-MAGMAN-8

5

MultiMag Compact Magnetic Wheeled Manual Scanner

Operates in any orientation from 3” OD up to flat plate

Pivoting arms to optimize probe contact

Can support up to 4 probes Wheel brackets tilt to assist with misaligned

welds

Quick release handles allow easy movement of wheels, tool-post and encoder positions

Robust modular construction for practicality on site

For use with any manufacturer’s instrumentation Waterproof Encoder

MultiMag - Phased Array/TOFD Model

Description Product code MultiMag 2PA Encoder with 5m cable wired for VEO/PRISMA 2off toolposts with PA wedge cradles (s pecify PA wedge)

AE-MULTIMAG-2PA

MultiMag 4PA Encoder with 5m cable wired for VEO/PRISMA 2off standard Toolposts with 30x30mm forks 2off toolposts with PA wedge cradles (s pecify PA wedge)

AE-MULTIMAG-4PA

MultiMag - TOFD/PE Model

Description Product code MultiMag 2 Encoder with 5m cable wired for VEO/PRISMA 2off standard Toolposts with 30x30mm forks

AE-MULTIMAG-2

MultiMag 4 Encoder with 5m cable wired for VEO/PRISMA 4off standard Toolposts with 30x30mm forks

AE-MULTIMAG-4

6

Swift Single or dual direction TOFD and phased array weld scanner

Description Product code Single direction TOFD only

AE-SWIFT-SD-TOFD

Dual direction TOFD only

AE-SWIFT-DD-TOFD

Single direction for phased array only

AE-SWIFT-SD-PA

Dual direction for phased array only

AE-SWIFT-DD-PA

Optional Accessories Description Product code

Pivoting wheel units (single)

AEP-SWIFT-PW

Pre-Amplifier (40db) supplied with 1m cable

PRE-AMP-TOFD

Replacement encoder terminated for Veo/Prisma (5m)

AEP-ENCWP-5M-TERM

Operates on 3” pipe (88.9mm) up to flat Accurate positional data acquisition via high resolution

encoder (33 steps/mm)

Versatile pivoting wheel option for B or D scans Innovative toolpost ‘lift & lock’ feature: allows for quick

change of wedges

Reliable brake system locks scanner in position, maintaining

scan position

Universal tool posts can hold TOFD or phased array probes

and wedges

User friendly – can be operated using just one hand

7

Bracelet Scanner Small Bore Weld Scanner

Description Product code Qty Bracelet scanner for use on 1.5” to 4” NPS and encoder with 5m cable wired for VEO/PRISMA FLAT PA wedge Contoured PA wedges with irrigation for use with Phoenix Bracelet scanner on 1.5/2/2.5/3/3.5/4 NPS To fit Olympus phased array probe (not included)

AE-BRLT-S-1.5”-4”

AE-BRLT-W-ONDT-FLT AE-BRLT-W-ONDT

1 1 6

Bracelet scanner for use on 0.5” to 4” NPS and encoder with 5m cable wired for VEO/PRISMA Contoured PA wedges with irrigation for use with Phoenix Bracelet scanner on 0.5/0.75/1/1.25/1.5/2/2.5/3/3.5/4 NPS To fit Olympus phased array probe (not included)


AE-BRLT-W-ONDT

1

10

Bracelet scanner for use on 0.5” to 6” NPS and encoder with 5m cable wired for VEO/PRISMA Contoured PA wedges with irrigation for use with Phoenix Bracelet scanner on 0.5/0.75/1/1.5/2/2.5/3/3.5/4/6 NPS To fit Olympus phased array probe (not included)


AE-BRLT-W-ONDT

1

11

Bracelet scanner for use on 1.5” to 6” NPS and encoder with 5m cable wired for VEO/PRISMA Contoured PA wedges with irrigation for use with Phoenix Bracelet scanner on 1.5/2/2.5/3/3.5/4 NPS To fit Olympus phased array probe (not included)


AE-BRLT-W-ONDT

1 7

For phased array or TOFD inspections

Scans pipes ranging from 0.5" to 8" NPS

Clearance envelope of 13mm

Option of either single or dual probe inspection techniques

Rubber wheels provide smooth circumferential movement around pipe

Probes and wedges are easily inter-changeable

Miniature sealed encoder provides 36steps/mm

Compatible with industry standard phased array probes and flaw detectors

8

Dual Bracelet Small Bore Weld Scanner

Description Product code Qty Dual Bracelet scanner for use on 1.5” to 4” NPS and encoder with 5m cable wired for VEO/PRISMA FLAT PA wedge Contoured PA wedges with irrigation for use with Phoenix Bracelet scanner on 1.5/2/2.5/3/3.5/4 NPS To fit Olympus phased array probes (not included) DUAL BRACELET is DESIGNED for use WITH 2 OFF PA PROBES

AE-BRLT-D-1.5”-4”

AE-BRLT-W-ONDT-FLT AE-BRLT-W-ONDT

1 2

12

Bracelet Phased Array Probes and Calibration Block Description Product code Qty

Olympus low profile PA probe – 7.5MHz, 16 elements, 0.5mm pitch with connector to suit VEO/PRISMA Delivery 3 weeks

OL 7.5/16 LP-PA 1

Olympus low profile PA probe – 10MHz, 32 elements, 0.25mm pitch with connector to suit VEO/PRISMA Delivery 3 weeks

OL 10/32 LP-PA 1

Contoured Boiler Tube Calibration Block (BTB) – boiler tube block for calibrating low profile PA probes for use with Bracelet scanner, 3 x 1.5mm dia SDH and contoured for 2” OD (1.5” NPS) (other contours available incl. 2”/2.5”/3”/3.5”/4” NPS)

BRAC-BTB-BLOCK 1

1 x Dual BRACELET scanner for use on 1.5” – 4” Nominal Pipe Size (NPS)

2 x Low profile phased array probe 1 x Encoder with 2.5m cable wired for Veo

2 x FLAT wedges 12 x contoured wedges for use on 1.5/2/2.5/3/3.5/4”NPS for use

with Olympus phased array probe

Irrigation tubing and accessories

Operators Manual Carry Case

9

TOFD Caliper Compact Single Axis Scanner

Description Product code Qty TOFD Caliper and encoder with 5m cable wired for VEO/PRISMA 2off CDTOF 05/02 probes – 5MHz-6mm-M12 2off WTOFI 12/45 45 deg plastic TOFD wedge M12 2off WTOFI 12/60 60 deg plastic TOFD wedge M12 2off WTOFI 12/70 70 deg plastic TOFD wedge M12 1off TPCL00-L00 5M – 5m cables – Lemo00 to Lemo00

AE-CALIPER-5

1 2 2 2 2 1

TOFD Caliper and encoder with 5m cable wired for VEO/PRISMA 2off CDTOF 10/02 probes – 10MHz-6mm-M12 2off WTOFI 12/45 45 deg plastic TOFD wedge M12 2off WTOFI 12/60 60 deg plastic TOFD wedge M12 2off WTOFI 12/70 70 deg plastic TOFD wedge M12 1off TPCL00-L00 5M – 5m cables – Lemo00 to Lemo00

AE-CALIPER-10

1 2 2 2 2 1

Fully adjustable probe centre separation (PCS) from 28mm to 160mm

Quick release tandem probe attachment via gimballed holders

Operates in any orientation and on surface from flat down to 75mm O/D

‘Plug in and go’ design

Accurate tracking by virtue of ‘easy steer’ motion

For use with any manufacturer’s instrumentation

Waterproof encoder

10

WREN Weld Root Erosion Scanner

4” WREN

WREN 4 Description Product code Qty

4" Scanner and encoder with 5m cable wired for VEO/PRISMA 2off CDTOF 05/02 probes – 5MHz-6mm-M12 2off WREN12/45 45˚ Brass TOFD wedge M12 2off WREN12/60 60˚ Brass TOFD wedge M12 2off WREN12/70 70˚ Brass TOFD wedge M12 1off TPCL00-L00 5M – 5m cables–L00 to L 00

AE-WREN4-5

1 2 2 2 2 1


AE-WREN4-10

1 2 2 2 2 1

WREN 8 Description Product code Qty


AE-WREN8-5

1 2 2 2 2 1


AE-WREN8-10

1 2 2 2 2 1

TOFD scanner for weld root erosion or general TOFD inspection

100mm & 200mm long TOFD scanning frame Can be operated using one hand Ideal for site use in areas with minimum access Waterproof Encoder

11

R-Evolution Lightweight phased array roller probe

The R-Evolution kit includes: Array roller probe (specify frequency and instrument when ordering)

Self-normalising buggy with laser guidance or blank handle

Integrated encoder (specify instrument when ordering)

Tyre fi l l ing accessories and water spray bottle

Protective carry case

Description Product code Qty

AE-REVLTN-5-64-HNDL Inclusive of:-

5MHz, 64 elements, 0.8mm pitch with 5m cable wired for use with (please specify)

Integrated handle with Lasers and Clicker function

AE-REVLTN-5-64-HNDL 1

AE-REVLTN-10-64-HNDL Inclusive of:-


Integrated handle with Lasers and Clicker function

AE-REVLTN-10-64-HNDL 1

AE-REVLTN-5-64 Inclusive of:


AE-REVLTN-5-64 1

AE-REVLTN-10-64 Inclusive of:


AE-REVLTN-10-64 1

Lightweight and ergonomic -

12

Swipe Semi-automated dual axis scanner for ultrasonic inspection

The Swipe kit includes: Magnetic or non-magnetic wheels scanner with transverse slide axis Both axis encoded

13

Swipe – Rubber wheeled version

Description Product code Qty AE-SWIPE-400R

Rubber wheeled scanner with transverse slide axis. Slide axis allows 400mm stroke.

AE-SWIPE-400R 1

AE-SWIPE-600R


AE-SWIPE-600R 1

AE-SWIPE-800R


AE-SWIPE-800R 1

14

MapMan Semi-automated corrosion mapping scanner

Description Product code Qty AE-MAPMAN-OH-M

Dual axis corrosion mapping scanner with switchable magnets and rubber wheels for use with the Olympus HydroFORM probe. Includes 2 encoders with 7.5m cable wired for use with (please specify)

AE-MAPMAN-OH-M 1

Modular 2 axis manual that is ideal for corrosion mapping of pipes and vessels.

Dual axis encoding Magnetic wheels for stability Increment rail with pre-defined grooves For use on components from 100mm (4”) outside diameter up Maximum stroke inspection up to 550mm

Weight: 3kg – 5kg (depending on configuration)

15

SAW Bug Motorised Single Axis Weld Scanner

The SAW Bug kit inc ludes:

1 x Buggy with 4 magnetic wheels 1 x Adjustable probe frame 1 x Single axis Drive® motor controller unit 1 x 5m ‘umbilical’ cable, 2.5m cable from motor controller to instrument 1 x Remote handset 1 x 5m irrigation tubing 1 x Laser guide 1 x 5m Twin UT cable(s) Phased Array and/or TOFD Tool-posts, see below options (specify code when ordering) Run-off mat Rugged carry case

SAW Bug - Phased Array/TOFD Model

Description Product code Qty SAWBUG 2PA 2 x toolposts with PA wedge cradles (specify PA wedge)

AE-SAWBUG-2PA 1

SAWBUG 4PA 2 x TOFD Tool-posts & 2 x Phased Array Tool-posts (please specify the PA wedge type)

AE-SAWBUG-4PA 1

SAWBUG 6PA 4 x TOFD Tool-posts & 2 x Phased Array Tool-posts (please specify the PA wedge type)

AE-SAWBUG-6PA 1

SAW Bug - TOFD/PE Model

Description Product code Qty SAWBUG 2 2 x TOFD Tool-posts

AE-SAWBUG-2 1

SAWBUG 4 4 x TOFD Tool-posts

AE-SAWBUG-4 1

SAWBUG 6 6 x TOFD Tool-posts

AE-SAWBUG-6 1

Low cost automated single axis inspection

Quick to setup and operate User-friendly operation with simple control handset

Compatible with all instruments with encoding capabilities Powerful four wheel drive system gives excellent grip and

performance to overcome small obstructions

Laser guide for alignment

Holds up to 6 probes No tools required, simple to adjust probe position with

thumbscrew

16

Tracer Portable C-Scan Mapping System

Description Product code Qty Tracer Portable C-Scan Mapping System For use with VEO/PRISMA

AE-TRACER-ALL-SB 1

Tracer is a versatile freehand scanning system that calculates and outputs accurate X-Y position data for C-scan mapping inspections without the constraints of a scanning frame. Tracer is ideally suited to operate with linear array probes to provide a fast, simple and flexible portable C-scan Inspection kit. Features

Inspection resolution: 5 steps/mm Inspection area: 2m x 2m

Inspection speed: Up to 500mm/s in any direction Mounting Separation: 0.2m to 2m

The Tracer kit inc ludes:

Interface unit to convert two wire encoder measurements to XY position, 0.2mm resolution

Cable to connect interface unit to instrument.

2 x draw wire encoders, 3m length

2 x vacuum cup encoder mounts

2 x clamp encoder mounts

2 x magnetic encoder mounts

C-Clamp to attach to probes up to 55mm width

Carry Case

17

Sp-Arc Small pipe corrosion mapping scanner

Sp-Arc Scanner & Waterboxes All of the below options are supplied with:

1 x Magnetic wheeled buggy, adjustable from 1” – 4” pipe

1 x Encoder with 5m cable terminated for Veo/Prisma (please specify)

1 x Rugged carry case

NB – all diameters are nominal bore pipe sizes


1” – 2” Sp-Arc Scanner for with 2 waterboxes – size to be specified from the below list:

1” – R35 2” – R35

6 x Spare foam seals to suit waterboxes

AEP-SPARC-1-2 1

1” – 3” Sp-Arc Scanner with 3 waterboxes – size to be specified from the below list:

1” – R35 2” – R55 3” – R55


AEP-SPARC-1-3 1


1” – R35 2” – R55 3” – R55 4” – R70


AEP-SPARC-1-4 1

Continued…

Sp-Arc is a unique mapping tool for measuring wall thickness longitudinally along small bore ferritic pipes, enabling continuous corrosion assessment along unlimited lengths. Covers the important inspection area on the

underside of pipes

Up to 120° coverage in a single scan (1-2” NPS)

Scans small bore pipes from 1” – 4” NPS

Immersion quality ultrasonic data provides excellent near-surface resolution

18

Description Product code Qty 2” – 3” Sp-Arc Scanner with 2 waterboxes – size to be specified from the below list:

2” – R55 3” – R55


AEP-SPARC-2-3 1


2” – R55 3” – R55 4” – R70


AEP-SPARC-2-4 1

4” Sp-Arc Scanner with 1 waterboxes:

4” – R70 3 x Spare foam seals to suit waterboxes

AEP-SPARC-4 1

Manufacture of a non-standard waterbox – size to be specified from the below list:

1.25” – R35 1.5” – R35 2.5” – R55 3.5” – R70

S1 – SPARC-WB 1

Curved Array Probes


R35 – for use on 1”-2” 10MHz, concave in azimuth array 35mm radius, 64 elements, 80X3mm total active aperture, 1.25mm pitch, 3mm elevation, impedance matching to water, PVC sheathing, 5m cable length, Veo/Prisma connector

10CC35-64-80X3-R-P-5-OM 1

R55 – for use on 2”-3” 10MHz, concave in azimuth array 55mm radius, 64 elements, 96X3mm total active aperture, 1.5mm pitch, 3mm elevation, impedance matching to water, PVC sheathing, 5m cable length, Veo/Prisma connector

10CC55-64-96X3-R-P-

5-OM 1

R70 – for use on 4” 10MHz, concave in azimuth array 70mm radius, 96 elements, 144X3mm total active aperture, 1.5mm pitch, 3mm elevation, impedance matching to water, PVC sheathing, 5m cable length, Veo/Prisma connector

10CC70-96-144X3-R-P-5-OM 1

19

C-Clamp Encoder Versatile Waterproof Wheel Encoder

Description Product code Qty C-Clamp encoder with 2.5m cable with connector terminated for VEO/PRISMA

AE-ENCLMP 1

The C-Clamp encoder is a universal accessory for single axis manual inspections requiring no tools for setup and operation. The two clamping arms adjust up to 55mm separation to fit around a wide range of ultrasonic transducers and phased array wedges.

C-Clamp encoder attached to a Phased Array wedge (PA Probe & Wedge not included)

Clamp width: Max opening 55mm

Encoder wheel diameter: 39mm

Encoder Resolution: 33 steps/mm

Waterproof: IP68 rated (immersion up to 1m)

Adjustable encoder spring-loaded

Can be positioned at 0° & 90° (for B & D scans)

20

Wrap-It Flexible phased array scanning tool


AEP-WRAPIT-R7 Two part rubber enclosure to hold flexible array suitable for inspecting R5-R10 radii, includes:

Rubber wedge Built in irrigation Encoder with 5m cable terminated with (Please specify)

AEP-WRAPIT-R7 1



AEP-WRAPIT-R14 1



AEP-WRAPIT-R28 1



AEP-WRAPIT-R56 1



AE-ENC-BKT-VEO 1

Continued…

Wrap-It is a flexible ultrasonic phased array tool that can be wrapped around a curved surface to quickly inspect along a component.

Conforms to the shape of the component or inspection surface

Simple inspection setup as probe is always normal to the surface

No adjustment needed when scanning a changing radius

Cost effective for multiple geometries as a single transducer can be used in several housings

21

Flexible phased array probes

CFFPA 5/8/1/6.4 5MHz, 8 element, 1mm pitch with 5m cable for use with (Please specify)

CFFPA 5/8/1/6.4 1


CFFPA 5/16/1/6.4

1


CFFPA 5/32/1/6.4

1


CFFPA 5/64/1/6.4

1


CFFPA 5/128/1/6.4

1

22

CDS Couplant Delivery System

CDS Kit includes:

Couplant Delivery System

Power cable

8mm tubing

Description Product code Qty Couplant Delivery System

AE-CDS

1

CDS is a battery-powered, variable flow rate pumping system for delivering water as a couplant for ultrasonic inspections using single or multiple probes.

This portable low-pulsation pump delivers constant pressure and has an integrated battery providing up to six hours continuous use in the field.

Can be simultaneously charging and operational

Self-priming up to 1.5m

Maintains water pressure for common water box applications

System can pump viscous liquids if necessary

Water efficient on certain systems

23

PreAmplifier Ultra-low noise TOFD PreAmplifier

Description Product code Qty 40dB TOFD PreAmp 1 channel

PRE-AMP-TOFD 1

40dB TOFD PreAmp 2 channel

PRE-AMP-TOFD-2CH 1

40dB TOFD PreAmp 4 channel

PRE-AMP-TOFD-4CH 1

An ultra-low noise, wide bandwidth, fixed-gain 40dB TOFD PreAmplifier, suitable for use with any ultrasonic transducers and system.

The PreAmplifier from Phoenix can be used for TOFD inspections when long probe leads are used and additional gain is required at the front-end. The PreAmplifier will enhance weak signals and improve the effective signal-to-noise of the system. Available as 40dB TOFD 1, 2 or 4 channel.

24

NozzleScan Radial nozzle scanner with probe skew

NozzleScan is available to order in a wide range of configurations. Select options from the tables below to create a product code for you specific requirement. Prices are listed in the following tables with corresponding product codes for all variations:

Item No. Description - Magnetic with 100mm stroke Qty 1

Product code: AE-NOZ-MAG-RD100-FREE-2AX

1

2


1

3

Product code: AE-NOZ-MAG-RD100-ADJ-2AX

1

4


1

5

Product code: AE-NOZ-MAG-RD100-NONE-2AX

1

Item No. Description - Magnetic with 250mm stroke Qty 6


1

7


1

8


1

A versatile solution developed for the inspection of nozzle welds in both set-through and set-on configurations. Available in both Two-axis and three-axis instrument configurations

Transducer skew axis can be adjusted, encoded and locked

Adaptable to a wide range of 90 degree nozzle sizes, from 3” upwards

Options for mounting to ferritic and austenitic parent materials

Encoders incorporated for semi-automated inspection data recording

25

9


1

10

Product code: AE-NOZ-MAG-RD250-NONE-2AX

1

Item No. Description – Magnetic Branch version Qty

11 Product code: AE-NOZ-MAG-AXIAL-ADJ-2AX

1

12

Product code: AE-NOZ-MAG-AXIAL-ADJ-3AX

1

Item No. Description – 4” Ring Branch version Qty

13 Product code: AE-NOZ-RNG4-AXIAL-ADJ-2AX

1

14

Product code: AE-NOZ-RNG4-AXIAL-ADJ-3AX

1



1

16


1



1

18


1

Item No. Description – 4” Ring with 100mm stroke Qty

19 Product code: AE-NOZ-RNG4-RD100-FREE-2AX

1

20

Product code: AE-NOZ-RNG4-RD100-FREE-3AX

1

21

Product code: AE-NOZ-RNG4-RD100-ADJ-2AX

1

22


1

23

Product code: AE-NOZ-RNG4-RD100-NONE-2AX

1



1

25


1

26


1

26

27 Product code: AE-NOZ-RNG4-RD250-ADJ-3AX

1

28


1



1

30


1

31


1

32


1

23


1



1

35


1

36


1

37


1

38


1



1

40


1

41 Product code: AE-NOZ-RNG12-RD100-ADJ-2AX

1

42


1

43


1



1

45


1

27

46


1

47


1

48


1

28

Duo Radial nozzle scanner with probe skew

Features

Description Product code Qty Duo Scanner with wheels

AE-DUO 1

Hand-held Duo Scanner (no wheels)

AE-DUO-FRAME 1

The Duo scanner is a robust, ergonomic scanning frame with operator-friendly features offering fast setup and reliable, repeatable TOFD inspections of pipe welds, from 2”OD up to flat plate.

Robust, ergonomic frame with handles for ease of use

Three magnetic wheels for adhesion and accurate tracking

A brake for hand repositioning

High-resolution waterproof wheel encoder

Graduated scale provides accurate probe positioning whilst maintaining alignment

Lightweight: 1.25 kilograms

Compact design: 240 x 180 x 80mm (with wheels)

Range: 2”OD up to flat

Quick release wedges

Kit

Duo scanning frame (with/out magnetic wheels - see order information)

Waterproof wheel encoder

Durable carry case

29

Drive 1-4 Axis Motor Controller

Features

Description Product code Qty 2 axis - Low Power (6A/motor) 150W

AE-DRV-L2 1

4 axis - Low Power (6A/motor) 150W

AE-DRV-L4 1

2 axis - High Power (10A/motor) 500W

AE-DRV-H2 1

Drive is an ‘all-in-one’ scanner controller, capable of manipulating one to four motorised axes simultaneously

Using Linear Amplifiers, Drive can produce 150W of motor power, with minimal interference to UT, TOFD, PA and EC signals, enhancing inspection quality and reducing inspection time.

Max Output 150W across all axes

Fully integrated touch screen PC and control system

Remote control via Ethernet or consumer joypad/joysticks

Fully customisable, built-in automated scan plans

Flexible GPIO interface for pneumatics, sensors and cameras

Compatible with existing scanning devices

Dimensions: 485x392x192mm

Weight: 12Kg

Kit Drive Motor Controller

Housed in rugged hand-carry case

Remote emergency stop

Contact Us

Phoenix Inspection Systems Limited Dalton House 40 Hardwick Grange Warrington WA1 4RF United Kingdom t: +44 (0) 1925 826 000 f: +44 (0) 1925 838 788 e: [email protected] www.phoenixisl.com

Contents4th Generation MagManMultiMagSwiftBracelet ScannerDual BraceletTOFD CaliperWRENR-EvolutionSwipeMapManSAW BugTracerSp-ArcC-Clamp EncoderWrap-ItCDSPreAmplifierNozzleScanDuoDrive

Documents

Standard Scanners Catalogue - NAMIKON 2001...2off WTOFI 12/60 60 deg plastic TOFD wedge M12 2off WTOFI 12/70 70 deg plastic TOFD wedge M12 1off TPCL00-L00 5M – 5m cables – Lemo00